View ALT6704_4965017.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

ALT6704 help4 tm umts1700 (band 3,4,9,10) wcdma/lte/cdma mixed mode pam data sheet - rev 2.5 m45 package 10 pin 3 mm x 3 mm x 1 mm surface mount module figure 1: block diagram features ? mixed-mode hspa, evdo, lte compliant ? 4th generation help tm technology ? high effciency (r99 waveform): ? 39 % @ p out = +28.6 dbm ? 35 % @ p out = +17 dbm ? 22 % @ p out = +13.5 dbm ? 27 % @ p out = +9 dbm ? 13 % @ p out = +3.5 dbm ? low quiescent current: 2 ma ? low leakage current in shutdown mode: <5 a ? internal voltage regulator ? integrated daisy chainable directional coupler with cpl in and cpl out port. ? internal dc blocks on in/out rf ports ? optimized for a 50 ? system ? 1.8 v control logic ? rohs compliant package, 260 o c msl-3 applications ? band 3, 4, 9,10 wcdma/hspa wireless devices ? band 4 lte wireless devices ? aws/kpcs cdma/evdo wireless devices product description the ALT6704 help4 tm pa is a 4th generation help tm product for lte and wcdma devices operating in umts1700 (band 3, 4, 9, 10) and for cdma devices operating in aws/kpcs band. this pa incorporates anadigics help4 tm technology to deliver exceptional effciency at low power levels and low quiescent current without the need for external voltage regulators or converters. the device is manufactured using advanced ingap-plus tm hbt technology offering state-of-the-art reliability, temperature stability, and ruggedness. three selectable bias modes that optimize effciency for different output power levels and a shutdown mode with low leakage current increase handset talk and standby time. a daisy chainable directional coupler is integrated in the module, thus eliminating the need of an external coupler. the self-contained 3 mm x 3 mm x 1 mm surface mount package incorporates matching networks optimized for output power, effciency, and linearity in a 50 ? system. al t6704 1 2 3 4 5 10 9 8 7 v bat t rf in v mode 2 v mode 1 v en cp l ou t gn d cp l in rf ou t v cc bias control voltage regulation cp l gnd at slug (pad ) 8 7 6 5 4 3 2 1 10 03/2012
2 figure 2: pinout (x-ray top view) table 1: pin description pin name description 1 v batt battery voltage 2 rf in rf input 3 v mode2 mode control voltage 2 4 v mode1 mode control voltage 1 5 v en pa enable voltage 6 cpl out coupler output 7 gnd ground 8 cpl in coupler input 9 rf out rf output 10 v cc supply voltage v bat t rf in v mode 2 v mode 1 v en 1 2 3 4 56 7 8 9 10 cp l ou t gn d cp l in rf ou t v cc 1 2 3 4 56 7 8 9 10 gn d data sheet - rev 2.5 03/2012 ALT6704
3 electrical characteristics table 2: absolute minimum and maximum ratings stresses in excess of the absolute ratings may cause permanent damage. functional operation is not implied under these conditions. exposure to absolute ratings for extended periods of time may adversely affect reliability. table 3: operating ranges the device may be operated safely over these conditions; however, parametric performance is guaranteed only over the conditions defned in the electrical specifcations. notes: (1) for operation at 3.1 v, p out is derated 0.8 db. (2) lte waveform: up to 20 mhz bw, qpsk, 18 rb, start = 0. (3) for operation at +105 c, p out is derated by 1.0 db. parameter min max unit supply voltage (v cc ) 0 +5 v battery voltage (v batt ) 0 +6 v control voltages (v mode1 , v mode2 , v en ) 0 +3.5 v rf input power (p in ) - +10 dbm storage temperature (t stg ) -40 +150 c pa ra me te r mi n ty p ma x unit co mments op er at in g fr eque nc y (f )1 71 0- 1785 mh z su pply vo lt age (v cc )+ 3. 1+ 3. 4+ 4. 35 vp ou t < +2 8. 6 db m en able vo lt age (v en ) +1 .3 5 0 +1 .8 - +3 .1 +0 .5 v pa "o n" pa "s hut dow n" mo de co nt ro l vo lt age (v mo de 1 ,v mo de 2 ) +1 .3 5 0 +1 .8 - +3 .1 +0 .5 v low bi as m ode hi gh bi as m ode wc dm a /umts ou tp ut po we r r9 9, hp m hs pa (mp r = 0) , hp m lt e (2 ) r9 9, mp m lt e (2 ) & hs pa (mp r= 0) , mp m r9 9, lp m lt e (2 ) & hs pa (mp r= 0) , lp m + 27. 8 + 26. 8 + 26. 6 - - - - 28. 6 27. 6 27. 4 17 .0 16 .0 9. 0 8. 0 - - - - - - - db m 3g pp ts 34 .1 21 -1 , re l 8 t abl e c. 11 .1 .3 fo r wc dm a su bt est 1 ts 36. 101 re l 8 fo r lt e cdm a ou tp ut po we r hp m mp m lp m + 27. 2 - - 28. 0 16 .0 7. 0 - - - db m cdma 2000 , rc -1 ca se te mp er at ur e (t c )- 40 -+ 90 c (1 , 3) (1 , 3) data sheet - rev 2.5 03/2012 ALT6704
4 table 4: electrical specifcations - lte operation = 10 mhz qpsk 12 rb (start = 0) (t c = +25 c, v batt = v cc = +3.4 v, v eneble = +1.8 v, 50 ? system) notes: (1) aclr and effciency are measured at mid-band. parameter min typ max unit comments p 287 9 02( 9 02( dl 24.5 17 8 26.5 20 10 30 23 12.5 db p 287 p p 287 p p 287 p 9 9 9 9 9 9 aclr utra at ? ? ? - - - -39 -39 -40 -36 -36 -36 dbc p 287 p p 287 p p 287 p 9 9 9 9 9 9 aclr utra at ? ?? ? - - - -59 -59 -59 -40 -40 -40 dbc p 287 p p 287 p p 287 p 9 9 9 9 9 9 aclr e-utra - - - -39 -39 -40 -34 -34 -34 dbc p 287 p p 287 p p 287 p 9 9 9 9 9 9 3rhuh (iillh (1) 31 28 21 35 32 25 - - - p 287 p p 287 p p 287 p 9 9 9 9 9 9 4lhhw uuhw ,t /r ld 0rh - 2 3.0 p wur 9 cc sl 9 9 0rh rwur uuhw - 0.08 0.15 p wur 9 02( sl 9 02( 9 (deh uuhw - 0.04 0.1 p wur 9 en sl 77 uuhw - 0.8 1.5 p wur 9 batt sl 9 02( 9 /hdndh uuhw - <5 10 ? a 1rlh 3rhu - - - - -141 -134 -134 -145 -138 - - - p+ 0+ wr 0+ 0+ wr 0+ 36 d ism band +duprl ir ir ir - - -44 -50 -35 -42 dbc p 287 ?? ?8 ? ? - 20.5 - db luhwllw - 20 - db dl dl ,huwlr /r - 0.25 - db 6sulr 2wsw /hh d sulr rwsw - - <-70 dbc p 287 < p ,ed rd 965 2wried rd 965 sslh rhu d rshudwl udh /rd plpdw wuh lw r shupdhw huddwlr ru idluh - - 965 sslh rhu i rshudwl udh data sheet - rev 2.5 03/2012 ALT6704
5 table 5: electrical specifcations - wcdma operation (r99 waveform) (t c = +25 c, v cc = +3.4 v, v batt = +3.4 v, v en = +1.8 v, 50 ? system) parameter min typ max unit comments p out v mode1 v mode2 gain 24.5 17 8 26.5 20 10 30 23 12.5 db p out = +28.6 dbm p out = +17 dbm p out = +9 dbm 0 v 1.8 v 1.8 v 0 v 0 v 1.8 v aclr1 at 5 mhz offset - - - -41 -42 -42 -37 -37 -37 dbc p out = +28.6 dbm p out = +17 dbm p out = +9 dbm 0 v 1.8 v 1.8 v 0 v 0 v 1.8 v aclr2 at 10 mhz offset - - - -54 -54 -59 -48 -48 -48 dbc p out = +28.6 dbm p out = +17 dbm p out = +9 dbm 0 v 1.8 v 1.8 v 0 v 0 v 1.8 v power-added efficiency 35 30 - 23 - 39 35 22 27 13 - - - - - % p out = +28.6 dbm p out = +17 dbm p out = +13.5 dbm p out = +9 dbm p out = +3.5 dbm 0 v 1.8 v 1.8 v 1.8 v 1.8 v 0 v 0 v 0 v 1.8 v 1.8 v spurious output level (all spurious outputs) - - -70 dbc p out < +28.6 dbm in-band load vswr < 5:1 out-of-band load vswr < 10:1 applies over all operating conditions load mismatch stress with no permanent degradation or failure 8:1 - - vswr applies over full operating range data sheet - rev 2.5 03/2012 ALT6704
6 table 6: electrical specifcations - cdma operation (cdma2000, rc-1 waveform) (t c = +25 c, v batt = v cc = +3.4 v, v eneble = +1.8 v, 50 ? system) pa ra me te r mi n ty p ma x unit co mme nt s p ou t v mo de 1 v mo de 2 ga in 24 .5 17 8 26.5 20 10 30 23 12 .5 db p ou t = +2 8 db m p ou t = +1 6 db m p ou t = +8 db m 0 v 1. 8 v 1. 8 v 0 v 0 v 1. 8 v ad ja ce nt ch an ne l po we r at 1 .2 5 mh z of fs et pr im ar y ch an ne l bw = 1. 23 mh z ad ja ce nt ch an ne l bw = 30 kh z - - - -5 1 -5 4 -5 7 -4 6 -4 6 -4 6 db c p ou t = +2 8 db m p ou t = +1 6 db m p ou t = +8 db m 0 v 1. 8 v 1. 8 v 0 v 0 v 1. 8 v ad ja ce nt ch an ne l po we r at 1. 98 mh z offset pr im ar y ch an ne l bw = 1. 23 mh z ad ja ce nt ch an ne l bw = 30 kh z - - - -5 5 -5 7 -6 0 -5 3 -5 3 -5 3 db c p ou t = +2 8 db m p ou t = +1 6 db m p ou t = +8 db m 0 v 1. 8 v 1. 8 v 0 v 0 v 1. 8 v po we r-a dded e ffi ci en cy 34 26 20 37 31 24 - - - % p ou t = +2 8 db m p ou t = +1 6 db m p ou t = +8 db m 0 v 1. 8 v 1. 8 v 0 v 0 v 1. 8 v sp ur io us ou tp ut lev el (a ll sp ur io us ou tp ut s) -- -7 0d bc p ou t < +2 8 db m, in -b an d vsw r < 5: 1, ou t-of-b an d vswr < 10 :1 ap pl ie s to a ll oper at in g co nd it io ns load mi sm at ch st re ss wi th no per ma ne nt degr adat io n or fa il ur e 8: 1- -v sw ra ppli es ov er fu ll oper at in g ra ng e data sheet - rev 2.5 03/2012 ALT6704
7 performance data plots: (lte operation at 1747.5 mhz and 50 v system) 0 5 10 15 20 25 30 35 0 5 10 15 20 25 30 gain (db) pout (dbm) figure 4: lte gain (db) over temperature (vbatt=vcc=3.4v) - 30c 3.4vcc 25c 3.4vcc 90c 3.4vcc figure 3: lte gain (db) over temperature (v batt = v cc = 3.4 v) 0 5 10 15 20 25 30 0 5 10 15 20 25 30 gain (db) pout (dbm) figure 5: lte gain (db) over voltage (tc=25c ) 25c 3.2vcc 25c 3.4vcc 25c 4.2vcc figure 4: lte gain (db) over votlage (t c = 25 8c) 0 5 10 15 20 25 30 35 40 45 0 5 10 15 20 25 30 efficiency (%) pout (dbm) figure 6: lte pae (%) over temperature (vbatt=vcc=3.4v) - 30 3.4cc 25c 3.4vcc 90c 3.4vcc figure 5: lte pae (%) over temperature (v batt = v cc = 3.4 v) 0 5 10 15 20 25 30 35 40 45 0 5 10 15 20 25 30 efficiency (%) pout (dbm) figure 7: lte pae (%) over voltage (tc=25c) 25c 3.2vcc 25c 3.4vcc 25c 4.2vcc figure 6: lte gain (db) over temperature (v batt = v cc = 3.4 v) - 60 - 55 - 50 - 45 - 40 - 35 - 30 - 25 - 20 0 5 10 15 20 25 30 aclr1 (5mhz dbc) pout (dbm) figure 8: lte acrl1 (dbc) over temperature (vbatt=vcc=3.4v) - 30c 3.4vcc 25c 3.4vcc 90c 3.4vcc figure 7: lte aclr1 (dbc) over temperature (v batt = v cc = 3.4 v) - 60 - 55 - 50 - 45 - 40 - 35 - 30 - 25 - 20 0 5 10 15 20 25 30 aclr1 (5mhz dbc) pout (dbm) figure 9: lte aclr1 (dbc) over voltage (tc=25c) 25c 3.2vcc 25c 3.4vcc 25c 4.2vcc figure 8: lte gain (db) over temperature (v batt = v cc = 3.4 v) data sheet - rev 2.5 03/2012 ALT6704
8 application information to ensure proper performance, refer to all related application notes on the anadigics web site: http://www.anadigics.com shutdown mode the power amplifer may be placed in a shutdown mode by applying logic low levels (see operating ranges table) to the v en , v mode1 and v mode2 voltages. bias modes the power amplifer may be placed in either low, medium or high bias modes by applying the appropriate logic level (see operating ranges table) table 7: bias control to the v mode pins. the bias control table below lists the recommended modes of operation for various applications. three operating modes are recommended to optimize current consumption. high bias/high power operating mode is for p out levels > 16 dbm. at ~17dbm - 6 dbm, the pa could be switched to medium power mode. for p out levels < ~8 dbm, the pa could be switched to low power mode for extremely low current consumption. figure 9: evaluation board schematic c3 2.2f ceramic rf in 1 6 7 10 8 5 4 3 v batt v mode1 rf out rf in gnd v cc v en cpl out v cc c1 v batt v mode 1 v en cpl in v mode 2 29 v mode2 c5 2.2 f c2 0.1f gnd at slug cpl in cpl out rf out 33pf application p out levels bias mode v en v mode1 v mode2 v cc v b at t low power (low bias mode) < +8 dbm low +1.8 v +1.8 v +1.8 v 3.1 - 4.35 v > 3.1 v med power (medium bias mode) > 6 dbm < +17 dbm low +1.8 v +1.8 v 0 v 3.1 - 4.35 v > 3.1 v high power (high bias mode) > +16 dbm high +1.8 v 0 v 0 v 3.1 - 4.35 v > 3.1 v shutdown - shutdown 0 v 0 v 0 v 3.1 - 4.35 v > 3.1 v data sheet - rev 2.5 03/2012 ALT6704
9 figure 10: m45 package outline - 10 pin 3 mm x 3 mm x 1 mm surface mount module figure 11: branding specifcation - m45 package package outline 6704r llllnn yy wwc c pin 1 identifier co untr y co de(c c) pa rt number date co de y y= y ear ww = wo rk w eek l ot number data sheet - rev 2.5 03/2012 ALT6704
10 pcb and stencil design guideline figure 12: recommended pcb layout information data sheet - rev 2.5 03/2012 ALT6704
11 component packaging figure 13: carrier tape pin 1 figure 14: reel data sheet - rev 2.5 03/2012 ALT6704
12 ordering information order number temperature range pakcage description component packaging ALT6704rm45q7 -40 8c to +90 8c r o hs compliant 10 pin 3 mm x 3 mm x 1 mm surface mount module tape and reel, 2500 pieces per reel ALT6704rm45p9 -40 8c to +90 8c r o hs compliant 10 pin 3 mm x 3 mm x 1 mm surface mount module partial tape and reel warning anadigics products are not intended for use in life support appliances, devices or systems. use of an anadigics product in any such application without written consent is prohibited. import ant notice anadigics, inc. 141 mount bethel road warren, new jersey 07059, u.s.a. tel: +1 (908) 668-5000 fax: +1 (908) 668-5132 url: http://www.anadigics.com anadigics, inc. reserves the right to make changes to its products or to discontinue any product at any time without notice. the product specifcations contained in advanced product information sheets and preliminary data sheets are subject to change prior to a products formal introduction. information in data sheets have been carefully checked and are assumed to be reliable; however, anadigics assumes no responsibilities for inaccuracies. anadigics strongly urges customers to verify that the information they are using is current before placing orders. data sheet - rev 2.5 03/2012 ALT6704

▲Up To Search▲

Price & Availability of ALT6704

	To Download ALT6704 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .