only one name means protektion? www.protekdevices.com 05021.r11 4/11 page 1 05021 704-15k36 - 704-15k36t high power aircraft/ vehcile dc bus voltage suppressor d escriptio n the 704-15k36 and 704-15k36t are 15 kilowat silicon transient voltage suppressors (tvs) designed for use primarily in 28 volt aircraf applicatons in accordance with mil-std-704 and mil-std-19500. these assemblies typically operate with a minimum source impedance of 0.25 ohms. these devices have a peak pulse power ratng of 15,000 wats for a 1 ms waveshape and therefore can be used in applicatons where induced lightning on rural or remote transmission lines present a hazard to electronic circuitry. the 704-15k36 is designed for high current short peak pulse transient applicatons, where as the 704-15k36t is designed for extended peak pulse transients greater than 1 millisecond. this series can be screened upon request for military requirements in accordance with mil-prf-19500 (applicable tests). f eatures ? meets mil-std-704 ? 15 kilowats peak pulse power per line (tp = 10/1000s) ? each device 100% tested ? 28 volt power supply protecton m echa n ical characteristics ? molded plastc case ? 704-15k36 approximate weight: 38 grams ? 704-15k36t approximate weight: 65 grams ? flammability ratng ul 94v-0 ? military screening available upon request for iaw mil-prf-19500 ? standard screening available upon request: h1 - submodule screening (test plans 05231 & 05232) h2 - submodule & module screening (test plan 05233) h3 - submodule & module screening with group b & c lot testng (test plans 05234 & 05235) applicatio n s ? dc power supply protecton ? mil-std-704 power bus protecton 704 package a warranty disclaimer is required for the purchase of this part. contact customer service for more informaton. 704t package
only one name means protektion? www.protekdevices.com 05021.r11 4/11 page 2 05021 704-15k36 - 704-15k36t t y pical device characteristics maximum rati n gs @ 25c unless otherwise specifed parameter s y mbol value u n its peak pulse power (tp = 10/1000) - see figure 1 p pp 15 kilowats operatng temperature t l -55 to 150 c storage temperature t stg -55 to 150 c steady state power dissipaton @ 50c t a 10.0 wats forward surge ratng @ 25c 1/120 seconds fi 300 amps electrical characteristics per li n e @ 25c unless otherwise specifed part n umber rated sta n d-off voltage v wm volts mi n imum breakdow n voltage @10 m a v (br) volts maximum clampi n g voltage (fig. 2) @ i ppm v c volts maximum leakage curre n t @v wm i d a maximum peak pulse curre n t (f ig. 2) i ppm amps maximum forward voltage @100a, 8.3 ms v f volts dc 704-15k36 31.5 36 53 100 300 3.0 704-15k36t 31.5 36 53 500 300 15.0
only one name means protektion? www.protekdevices.com 05021.r11 4/11 page 3 05021 704-15k36 - 704-15k36t t y pical device characteristics figure 1 peak pulse power vs pulse time t d - pulse duraton - s 15kw 10/1000s waveform 704-15k36 704-15k36t 1 10 100 1,000 10,000 100,000 1m p pp - peak pulse power - kilowats 1 10 100 1,000 peak pulse power 10/1000s figure 3 power derati n g curve t l - lead temperature - c 0 25 50 75 100 125 150 0 20 40 60 80 100 % of rated power figure 2 pulse waveform t f peak value i pp test waveform parameters t f = 10s t d = 1000s t d = t/(i pp /2) e -t 0 1 2 3 t - time - ms 0 50 100 i pp - peak pulse current - % of i pp
only one name means protektion? www.protekdevices.com 05021.r11 4/11 page 4 05021 704-15k36 - 704-15k36t package i n formatio n 704 outli n e dime n sio n s dim millimeters i n ches mi n max mi n max a 49.28 51.56 1.97 2.03 b 43.92 44.96 1.73 1.77 c 2.79 3.56 0.11 0.14 d 18.29 19.81 0.72 0.78 e 3.18 dia 0.125 dia f 8.76 10.29 0.345 0.405 g 13.51 15.04 0.532 0.592 h 0.66 0.71 0.026 0.028 i 11.94 13.46 0.47 0.53 j 2.41 2.92 0.095 0.115 k 7.70 8.20 0.303 0.323 l 9.40 10.92 0.37 0.43 notes 1. dimension e is nominal. a b c d e f h g k l i
only one name means protektion? www.protekdevices.com 05021.r11 4/11 page 5 05021 704-15k36 - 704-15k36t package i n formatio n orderi n g i n formatio n base part n umber submodule scree n i n g submodule & m odule scree n i n g submodule, module, group b & c lot testi n g 704-15k36 h1 h2 h3 704-15k36t h1 h2 h2 notes 1. marking on part - logo, date code, polarity dot (for positve terminal) and part number. package outline per document number 06035.r2 9/09 704t outli n e dime n sio n s dim millimeters i n ches mi n max mi n max a 62.74 64.26 2.47 2.53 b 53.34 54.48 2.10 2.145 c 4.32 5.33 0.17 0.21 d 10.54 12.07 0.415 0.475 e 3.18 dia 0.125 dia f 8.26 9.27 0.325 0.365 g 11.43 0.45 h 21.84 23.37 0.86 0.92 i 5.59 0.22 j 16.51 17.53 0.65 0.69 k 8.51 0.335 notes 1. dimensions e, g, i and k are nominal. k j e g i f b a c d h
only one name means protektion? www.protekdevices.com 05021.r11 4/11 page 6 05021 704-15k36 - 704-15k36t compa ny i n formatio n compa ny profile protek devices, based in tempe, arizona usa, is a manufacturer of transient voltage suppression (tvs) products designed specifcally for the protecton of electronic systems from the efects of lightning, electrostatc discharge (esd), nuclear electromagnetc pulse (nemp), in - ductve switching and emi/rfi. with over 25 years of engineering and manufacturing experience, protek designs tvs devices that provide applicaton specifc protecton solutons for all electronic equipment/systems. protek devices analog products division, also manufactures analog interface, control, rf and power management products. copyright ? protek devices 1998 - this literature is subject to all applicable copyright laws and is not for resale in any manner. specifications: protek reserves the right to change the electrical and or mechanical characteristcs described herein without notce. design changes: protek reserves the right to discontnue product lines without notce and that the fnal judgement concerning selecton and specifcatons is the buyers and that in furnishing engineering and technical assistance. protek assumes no responsibility with respect to the selecton or specifcatons of such products. protek makes no warranty, representaton or guarantee regarding the suitability of its products for any partcular purpose, nor does protek assume any liability arising out of the applicaton or use of any product or circuit and specifcally disclaims any and all liability without limitaton special, consequental or incidental damages. life support policy: protek devices products are not authorized for use in life support systems without writen consent from the factory. co n tact us corporate headquarters 2929 south fair lane tempe, arizona 85282 usa by telephone general: 602-431-8101 sales: 602-414-5109 customer service: 602-414-5114 by fax general: 602-431-2288 by e-mail: sales: sales@protekdevices.com customer service: service@protekdevices.com technical support: support@protekdevices.com web www.protekdevices.com www.protekanalog.com warra nty disclaimer protek warrants only that the 704-15k36 product (the device) has been manufactured to meet the electrical specifcatons set forth in the electri - cal specifcaton data sheet published by protek devices. protek disclaims all other warrantes. if the device is applied or used in circumstances in which the electrical characteristcs specifed for the device are exceeded, the device may fail. protek devices is not liable for any failures of the device if the device is used in circumstances that exceed the published specifcatons for the device. if for any reason the device fails, customers sole and exclusive remedy shall be replacement of the failed device. customer assumes all risks arising from incorporaton of the device in to any other product. customer acknowledges that protek devices has made the device available to the customer for inspecton, and the customer has had an opportunity to inspect and test the device.
|
