www.rfm.com e-mail: info@rfm.com page 1 of 2 ?2009 by rf monolithics, inc. XOC17 - 11/11/09 electrical characteristics characteristic sym notes minimum typical maximum units frequency range (each ocx0 is single frequency) fo 5.000000 100.000000 mhz initial frequency tolerance options 100 200 ppb warm-up time to <10 ppb of 2 hour warm-up frequency (sc) at 25 c 10 minutes 0 to 70 c temperature range operation: stability options, 5 to 40 mhz using at crystal 5 50 ppb stability options, 5 to 40 mhz using sc crystal 4 20 stability options, 40 to 100 mhz using at crystal 10 100 stability options, 40 to 100 mhz using sc crystal 4 50 -20 to 70 c temperature range operation: stability options, 5 to 40 mhz using at crystal 5 50 ppb stability options, 5 to 40 mhz using sc crystal 4 50 stability options, 40 to 100 mhz using at crystal 10 100 stability options, 40 to 100 mhz using sc crystal 4 50 -40 to 85 c temperature range operation: ppb stability options, 5 to 20 mhz using at crystal 10 50 stability options, 20 to 40 mhz using at crystal 10 100 stability options, 40 to 100 mhz using at crystal 20 100 output waveform options: sinewave output, 50 ohm load harmonics -30 dbc, non-harmonics -70 dbc hcmos output, 15 pf load 40/60% duty cycle ttl output, 5 ttl load 40/60% duty cycle power supply voltage options, 5% tolerance vcc 3.30 5.00 12.00 v optional voltage tuning feature: voltage tuning range for 3.3 v power supply option 0 2.8 v voltage tuning range for 5 and 12 v power supply options 0 3.0 v frequency tuning range and linearity, at crystal 1 to 3 ppm, 10% to 20% linearity frequency tuning range and linearity, sc crystal 0.5 to 1 ppm, 10% linearity tuning input impedance 100k ohms tuning voltage reference output impedance 100 ohms tuning voltage reference output current 1ma operating power: within 2 minutes of turn on 2.0 2.5 w steady state 0.9 ? oven controlled crystal oscillators very high frequency accuracy and stability with fast warm-up low power consumption, small size low phase noise and jitter fixed-tuned and voltage-tunable options typical applications include: - cellular base stations - communication test equipment - precision frequency synthesizers complies with directive 2002/95/ec (rohs) 5 to 100 mhz frequency range XOC17 series ocxos pb preliminary
www.rfm.com e-mail: info@rfm.com page 2 of 2 ?2009 by rf monolithics, inc. XOC17 - 11/11/09
pin connection 1 oscillator output 2 case/circuit ground 3 tuning voltage input 4 tuning voltage reference output 5 power supply voltage input 5-pin seam weld case 25.8 x 25.8 x 12.7 mm nominal dimensions application circuit pin functions case outline drawing caution: electrostatic sensitive device. observe precautions for handling. notes: 1. the design, manufacturing process, and specifications of this device are subject to change without notice. bottom view electrical characteristics characteristic sym notes minimum typical maximum units aging: at crystal 50 200 ppb sc crystal 20 50 ssb phase noise, 10 mhz sc crystal option: @ 10 hz offset -125 dbc/hz @ 100 hz offset -135 @ 1 khz offset -145 @ 10 and 100 khz offset -155 lid symbolization tbd // ywws
|
