? north america tel: 800.366.2266 ? europe tel: +353.21.244.6400 ? india tel: +91.80.4155721 ? china tel: +86.21.2407.1588 visit www.macomtech.com for addi tional data sheets and product information. m/a-com technology solutions inc. and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. 1 low cost six-way smt power divider 1700 ? 2000 mhz rev. v3 ds56-0006 advanced: data sheets contain information regarding a product m/a-com technology solutions is considering for development. performance is based on target specifications, simulated results, and/or prototype measurements. commitment to develop is not guaranteed. preliminary: data sheets contain information regarding a product m/a-com technology solutions has under development. performance is based on engineering tests. specifications are typical. mechanical outline has been fixed. engineering samples and/or test data may be available. commitment to produce in volume is not guaranteed. features ? small size, low profile ? superior repeatability (lot-to-lot variation) ? typical isolation 25 db ? typical insertion loss 1.0 db ? low cost ? soic-16 package description m/a-com?s ds56-0006 is an ic-based monolithic power splitter/combiner in a low cost soic-16 plastic package. this 6-way power divider is ideally suited for applications where pcb real estate is at a pre- mium and standard packag ing for automated assem- bly and low cost are critical. typical applications in- clude base stations, portables, and peripheral de- vices (pcmcia cards) for wireless standards such as pcs, pcn, dect, phs, and dcs-1800. avail- able in tape and reel. the ds56-0006 is fabricated using passive- integrated circuit process. this process features full- chip passivation for increased performance and reli- ability. ordering information part number package ds56-0006 bulk packaging DS56-0006-TR 1000 piece reel note: reference application note m513 for reel size information. functional block diagram 1 pin configuration pin no. function pin no. function 1 gnd 9 gnd 2 rf 3 (out) 10 gnd 3 gnd 11 rf 6 (out) 4 rf 2 (out) 12 gnd 5 gnd 13 rf 5 (out) 6 rf 1 (out) 14 gnd 7 gnd 15 rf 4 (out) 8 rf in 16 gnd 1. all unused pins must be rf and dc grounded.
? north america tel: 800.366.2266 ? europe tel: +353.21.244.6400 ? india tel: +91.80.4155721 ? china tel: +86.21.2407.1588 visit www.macomtech.com for addi tional data sheets and product information. m/a-com technology solutions inc. and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. 2 low cost six-way smt power divider 1700 ? 2000 mhz rev. v3 ds56-0006 advanced: data sheets contain information regarding a product m/a-com technology solutions is considering for development. performance is based on target specifications, simulated results, and/or prototype measurements. commitment to develop is not guaranteed. preliminary: data sheets contain information regarding a product m/a-com technology solutions has under development. performance is based on engineering tests. specifications are typical. mechanical outline has been fixed. engineering samples and/or test data may be available. commitment to produce in volume is not guaranteed. electrical specifications: t a = 25c, z 0 = 50 parameter units min typ max insertion loss above 7.8 db 1700 ? 2000 mhz 1850 ? 1910 mhz db db ? ? 1.3 1.0 1.8 1.5 isolation 1700 ? 2000 mhz 1850 ? 1910 mhz db db 18 21 25 26 ? ? vswr input 1700 ? 2000 mhz 1850 ? 1910 mhz output 1700 ? 2000 mhz 1850 ? 1910 mhz ? ? ? ? ? ? ? ? 1.7:1 1.3:1 1.3:1 1.1:1 2.0:1 1.7:1 1.7:1 1.3:1 amplitude balance 1700 ? 2000 mhz 1850 ? 1910 mhz db db ? ? 0.8 1.0 1.3 1.3 phase balance 1700 ? 2000 mhz 1850 ? 1910 mhz deg. deg. ? ? 10 8 20 16 absolute maximum ratings 2,3 parameter absolute maximum input power 4 1 w cw operating temperature -40c to +85c storage temperature -65c to +150c 2. exceeding any one or combination of these limits may cause permanent damage to this device. 3. m/a-com does not recommend sustained operation near these survivability limits. 4. with internal load dissipation of 0.125 w maximum. handling procedures please observe the following precautions to avoid damage: static sensitivity gmic circuits are sens itive to electrostatic discharge (esd) and can be damaged by static electricity. proper esd control techniques should be used when handling these devices.
? north america tel: 800.366.2266 ? europe tel: +353.21.244.6400 ? india tel: +91.80.4155721 ? china tel: +86.21.2407.1588 visit www.macomtech.com for addi tional data sheets and product information. m/a-com technology solutions inc. and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. 3 low cost six-way smt power divider 1700 ? 2000 mhz rev. v3 ds56-0006 advanced: data sheets contain information regarding a product m/a-com technology solutions is considering for development. performance is based on target specifications, simulated results, and/or prototype measurements. commitment to develop is not guaranteed. preliminary: data sheets contain information regarding a product m/a-com technology solutions has under development. performance is based on engineering tests. specifications are typical. mechanical outline has been fixed. engineering samples and/or test data may be available. commitment to produce in volume is not guaranteed. amplitude imbalance vs. frequency isolation vs. frequency phase imbalance vs. frequency typical performance curves insertion loss vs. frequency input vswr vs. frequency output vswr vs. frequency
? north america tel: 800.366.2266 ? europe tel: +353.21.244.6400 ? india tel: +91.80.4155721 ? china tel: +86.21.2407.1588 visit www.macomtech.com for addi tional data sheets and product information. m/a-com technology solutions inc. and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. 4 low cost six-way smt power divider 1700 ? 2000 mhz rev. v3 ds56-0006 advanced: data sheets contain information regarding a product m/a-com technology solutions is considering for development. performance is based on target specifications, simulated results, and/or prototype measurements. commitment to develop is not guaranteed. preliminary: data sheets contain information regarding a product m/a-com technology solutions has under development. performance is based on engineering tests. specifications are typical. mechanical outline has been fixed. engineering samples and/or test data may be available. commitment to produce in volume is not guaranteed. soic-16 ? ? reference application note m 538 for lead-free solder reflow recommendations.
|
