View B156HW01-V4_5089520.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

1 of 34 au optronics corporation product specification b156hw01 v4 document version : 0.2 ( ) preliminary specifications ( ) final specifications module 15.6 (15.55) fhd 16:9 color tft-lcd with le d backlight design model name b156hw01 v4 (h/w:0a) note ( ) r,g phosphor led backlight with driving circuit des ign customer date checked & approved by date note: this specification is subject to change without notice. approved by date prepared by ining lai 10/28/2009 nbbu marketing division / au optronics corporation www.datasheet.co.kr datasheet pdf - http://www..net/
2 of 34 au optronics corporation product specification b156hw01 v4 document version : 0.2 contents 1. handling precautions ............................ ................................................... ........ 4 2. general description............................. ................................................... .......... 5 2.1 general specification .......................... ................................................... ............................5 2.2 optical characteristics ........................ ................................................... ............................6 3. functional block diagram........................ ................................................... ... 11 4. absolute maximum ratings ........................ ................................................... 12 4.1 absolute ratings of tft lcd module............. ................................................... ...............12 4.2 absolute ratings of environment................ ................................................... ..................12 5. electrical characteristics ...................... ................................................... ....... 13 5.1 tft lcd module ................................. ................................................... ..............................13 5.2 backlight unit ................................. ................................................... ..................................15 5.2.1 led characteristics .......................... ................................................... .............................15 6. signal characteristic ........................... ................................................... ........ 16 6.1 pixel format image ............................. ................................................... ............................16 6.2 the input data format .......................... ................................................... ..........................17 6.3 integration interface and pin assignment ....... ................................................... ...........18 6.3.1 connector description ........................ ................................................... ........................18 6.4 interface timing............................... ................................................... ................................21 7. vibration and shock test........................ ................................................... ..... 23 7.1 vibration test................................. ................................................... ...................................23 7.2 shock test spec:............................... ................................................... ...............................23 7.3. reliability................................... ................................................... .......................................23 8. mechanical characteristics...................... ................................................... .. 24 8.1 lcm outline dimension.......................... ................................................... ........................24 8.2 screw hole depth and center position ........... ................................................... ............26 9. shipping and package ............................ ................................................... ... 27 9.1 shipping label format .......................... ................................................... .........................27 9.2. carton package ................................ ................................................... ............................28 9.3 shipping package of palletizing sequence ....... ................................................... ........28 10. appendix: edid description ..................... ................................................... . 29 www.datasheet.co.kr datasheet pdf - http://www..net/
3 of 34 au optronics corporation product specification b156hw01 v4 document version : 0.2 record of revision version and date page old description new description remark 0.1 2009/05/13 all preliminary edition for custome r 0.2 2009/10/28 all updated shipping leabel www.datasheet.co.kr datasheet pdf - http://www..net/
4 of 34 au optronics corporation product specification b156hw01 v4 document version : 0.2 1. handling precautions 1) since front polarizer is easily damaged, pay attent ion not to scratch it. 2) be sure to turn off power supply when inserting or disconnecting from input connector. 3) wipe off water drop immediately. long contact with water may cause discoloration or spots. 4) when the panel surface is soiled, wipe it with abso rbent cotton or other soft cloth. 5) since the panel is made of glass, it may break or c rack if dropped or bumped on hard surface. 6) since cmos lsi is used in this module, take care of static electricity and insure human earth when handling. 7) do not open nor modify the module assembly. 8) do not press the reflector sheet at the back of the module to any directions. 9) at the insertion or removal of the signal interface connector, be sure not to rotate nor tilt the interface connector of the tft module. 11) after installation of the tft module into an en closure (notebook pc bezel, for example), do not twist nor bend the tft module even momentary. at designing the enclosure, it should be taken into consideratio n that no bending/twisting forces are applied to the tft module from outside. otherwise the tft module may be damaged. 12) small amount of materials having no flammability gr ade is used in the lcd module. the lcd module should be supplied by power complied with requirements of limited power source (iec60950 or ul1950), or be applied ex emption. 13) disconnecting power supply before handling lcd modu les, it can prevent electric shock, do not touch the electrode parts, cables, co nnectors and led circuit part of tft module that a led light bar build in as a light source of back light unit. it can prevent electros tic breakdown. www.datasheet.co.kr datasheet pdf - http://www..net/
5 of 34 au optronics corporation product specification b156hw01 v4 document version : 0.2 2. general description b156hw01 v4 is a color active matrix liquid crystal display composed of a tft lcd panel, a driver circuit, and led backlight system. the screen format is intended to support the 16:9 fhd (1920(h) x 1080(v)) screen and 262k co lors (rgb 6-bits data driver) with led backlight driving circuit. all input signals are lv ds interface compatible. b156hw01 v4 is designed for a display unit of noteb ook style personal computer and industrial machine. 2.1 general specification the following items are characteristics summary on the table at 25 condition: items unit specifications screen diagonal [mm] 394.87 active area [mm] 344.16 x 193.59 pixels h x v 1920x3(rgb) x 1080 pixel pitch [mm] 0.17925 x 0.17925 pixel format r.g.b. vertical stripe display mode normally white white luminance (i led =20ma) (note: i led is led current) [cd/m 2 ] 270 typ. (5 points average) 230 min. (5 points average) luminance uniformity 1.25 max. (5 points) contrast ratio 400 :1 response time [ms] 8 typ / 16 max nominal input voltage vdd [volt] +3.3 typ. power consumption [watt] 11.5 max. (include logic a nd blu power) weight [grams] 475 max. min. typ. max. length 358.8 359.3 359.8 width 209.0 209.5 210 physical size without inverter, bracket. [mm] thickness - - 5.8 electrical interface 2 channel lvds glass thickness [mm] 0.5 surface treatment anti-glare, hardness 2h,haze=42% 7 reflection type=normal, reflection Q 3% support color 262k colors ( rgb 6-bit ) temperature range operating storage (non-operating) [ o c] [ o c] 0 to +50 -20 to +60 rohs compliance rohs compliance www.datasheet.co.kr datasheet pdf - http://www..net/
6 of 34 au optronics corporation product specification b156hw01 v4 document version : 0.2 2.2 optical characteristics the optical characteristics are measured under stab le conditions at 25 (room temperature) : item symbol conditions min. typ. max. unit note white luminance iled=20ma 5 points average 230 270 - cd/m 2 1, 4, 5. r l horizontal (right) cr = 10 (left) 60 60 70 70 - - degre e viewing angle h l vertical (upper) cr = 10 (lower) 45 50 60 60 - - 4, 9 luminance uniformity 5p 5 points - - 1.25 1, 3, 4 luminance uniformity 13p 13 points - - 1.50 2, 3, 4 contrast ratio cr 300 400 - 4, 6 cross talk % 4 4, 7 t r rising - 6 9 t f falling - 2 5 response time t rt rising + falling - 8 14 msec 4, 8 rx 0.646 0.676 0.706 red ry 0.283 0.313 0.343 gx 0.187 0.217 0.247 green gy 0.631 0.661 0.691 bx 0.112 0.142 0.172 blue by 0.037 0.067 0.097 wx 0.263 0.313 0.363 color / chromaticity coodinates white wy 0.279 0.329 0.379 ntsc % cie 1931 -- 95 - 4 www.datasheet.co.kr datasheet pdf - http://www..net/
7 of 34 au optronics corporation product specification b156hw01 v4 document version : 0.2 note 1 : 5 points position (ref: active area) 1 2 3 4 5 h /4 h /4 h /4 h /4 h w w /4 w /4 w /4 w /4 note 2 : 13 points position (ref: active area) w /4 w w /4 h h /4 h /4 h /4 h /4 7 9 1 0 w /4 1 8 w /4 1 0 1 0 1 0 1 0 2 3 1 3 1 2 4 5 6 1 1 note 3 : the luminance uniformity of 5 or13 points is defi ned by dividing the maximum luminance values by the minimum test point luminance note 4 : measurement method the lcd module should be stabilized at given temper ature for 30 minutes to avoid abrupt temperature change during measuring. in order to stabilize the luminance, the measurement should be executed after w13 = maximum brightness of thirteen points minimum brightness of thirteen points maximum brightness of five poi nts w5 = minimum brightness of five points www.datasheet.co.kr datasheet pdf - http://www..net/
8 of 34 au optronics corporation product specification b156hw01 v4 document version : 0.2 lighting backlight for 30 minutes in a stable, wind less and dark room, and it should be measured in th e center of screen. note 5 definition of average luminance of white (y l ): measure the luminance of gray level 63 at 5 points y l = [l (1)+ l (2)+ l (3)+ l (4)+ l (5)] / 5 l (x) is corresponding to the luminance of the poin t x at figure in note (1). note 6 definition of contrast ratio: contrast ratio is calculated with the following for mula. note 7 definition of cross talk (ct) ct = | y b C y a | / y a 100 (%) where y a = luminance of measured location without gray level 0 pattern (cd/m 2 ) y b = luminance of measured location with gray level 0 pattern (cd/m 2 ) center of the screen tft - lcd module 50 cm photo detector lcd panel field=2 contrast ratio (cr)= brightness on the ?white? state brightness on the ?black? state www.datasheet.co.kr datasheet pdf - http://www..net/
9 of 34 au optronics corporation product specification b156hw01 v4 document version : 0.2 note 8 : definition of response time: the output signals of bm-7 or equivalent are measur ed when the input signals are changed from black to white (falling time) and from white to blac k (rising time), respectively. the response time i nterval between the 10% and 90% of amplitudes. refer to fig ure as below. s i g n a l ( r e l a t i v e v a l u e ) "black" tr tf "white" "white" 0% 10% 90% 100% www.datasheet.co.kr datasheet pdf - http://www..net/
10 of 34 au optronics corporation product specification b156hw01 v4 document version : 0.2 note 9 . definition of viewing angle viewing angle is the measurement of contrast ratio R 10, at the screen center, over a 180 horizontal and 180 vertical range (off-normal viewing angles) . the 180 viewing angle range is broken down as follows; 90 () horizontal left and right and 90 () vertical, high (up) and low (down). the measure ment direction is typically perpendicular to the display surface with the screen rotated about its center t o develop the desired measurement viewing angle. www.datasheet.co.kr datasheet pdf - http://www..net/
11 of 34 au optronics corporation product specification b156hw01 v4 document version : 0.2 3. functional block diagram the following diagram shows the functional block of the 15.6 inches wide color tft/lcd 40 pin. www.datasheet.co.kr datasheet pdf - http://www..net/
12 of 34 au optronics corporation product specification b156hw01 v4 document version : 0.2 4. absolute maximum ratings an absolute maximum rating of the module is as foll owing: 4.1 absolute ratings of tft lcd module item symbol min max unit conditions logic/lcd drive vin -0.3 +4.0 [volt] note 1,2 4.2 absolute ratings of environment item symbol min max unit conditions operating top 0 +50 [ o c] note 4 operation humidity hop 5 95 [%rh] note 4 storage temperature tst -20 +60 [ o c] note 4 storage humidity hst 5 95 [%rh] note 4 note 1: at ta (25 ) note 2: permanent damage to the device may occur if exceed maximum values note 3: led specification refer to section 5.2 note 4: for quality performance, please refer to au o iis (incoming inspection standard). twb=39c operating range storage range www.datasheet.co.kr datasheet pdf - http://www..net/
13 of 34 au optronics corporation product specification b156hw01 v4 document version : 0.2 5. electrical characteristics 5.1 tft lcd module 5.1.1 power specification input power specifications are as follows; the power specification are measured under 25 and frame frenquency under 60hz symble parameter min typ max units note vdd logic/lcd drive voltage 3.0 3.3 3.6 [volt] pdd vdd power - - 2.0 [watt] note 1/2 idd idd current - - 606 [ma] note 1/2 irush inrush current - - 2000 [ma] note 3 vddrp allowable logic/lcd drive ripple voltage - - 100 [mv] p-p note 1 : maximum measurement condition black pattern at 3.3v driving voltage. (p max =v 3.3 x i black ) note 2 measure condition 90% 10% vin rising time 0v 3.3v 0.5ms www.datasheet.co.kr datasheet pdf - http://www..net/
14 of 34 au optronics corporation product specification b156hw01 v4 document version : 0.2 5.1.2 signal electrical characteristics input signals shall be low or high-impedance state when vdd is off. signal electrical characteristics are as follows; parameter condition min max unit v th differential input high threshold (vcm=+1.2v) - 100 [mv] v tl differential input low threshold (vcm=+1.2v) -100 - [mv] |v id | differential input voltage 100 600 [mv] v cm differential input common mode voltage 1.125 1.375 [v] note: lvds signal waveform www.datasheet.co.kr datasheet pdf - http://www..net/
15 of 34 au optronics corporation product specification 5.2 backlight unit 5.2.1 led characteristics parameter symbol min typ max units condition backlight power consumption pled - 9.0 9.6 [watt] (ta=25 ), note 1 vin =12v led life-time n/a 10,000 - - hour (ta=25 ), note 2 i f =20 ma note 1: calculator value for reference p led = vf (normal distribution) * if (normal distributi on) / efficiency note 2: the led life-time define as the estimated time to 50% degradation of initial luminous. 5.2.2 backlight input signal characteristics parameter symbol min typ max units remark led power supply vled 7.0 12.0 21.0 [volt] led enable input high level 2.5 - 5.5 [volt] led enable input low level vled_en - - 0.8 [volt] pwm logic input high level 2.5 - 5.5 [volt] pwm logic input low level vpwm_en - - 0.8 [volt] pwm input frequency fpwm 100 200 20k hz pwm duty ratio duty 5 -- 100 % define as connector interface (ta=25 ) www.datasheet.co.kr datasheet pdf - http://www..net/
16 of 34 au optronics corporation product specification 6. signal characteristic 6.1 pixel format image following figure shows the relationship of the inpu t signals and lcd pixel format. r g b r g b r g b r g b r g b r g b r g b r g b 1 1920 1st line 1080th line www.datasheet.co.kr datasheet pdf - http://www..net/
17 of 34 au optronics corporation product specification 6.2 the input data format signal name description r5 r4 r3 r2 r1 r0 red data 5 (msb) red data 4 red data 3 red data 2 red data 1 red data 0 (lsb) red-pixel data red-pixel data each red pixel's brightness data consists of these 6 bits pixel data. g5 g4 g3 g2 g1 g0 green data 5 (msb) green data 4 green data 3 green data 2 green data 1 green data 0 (lsb) green-pixel data green-pixel data each green pixel's brightness data consists of thes e 6 bits pixel data. b5 b4 b3 b2 b1 b0 blue data 5 (msb) blue data 4 blue data 3 blue data 2 blue data 1 blue data 0 (lsb) blue-pixel data blue-pixel data each blue pixel's brightness data consists of these 6 bits pixel data. rxclkin data clock the signal is used to strobe the pixel data and de signals. all pixel data shall be valid at the falling edge when the de signal is high de display timing this signal is strobed at the fal ling edge of rxclkin. when the signal is high, the pixel data sh all be valid to be displayed. vs vertical sync the signal is synchronized to rxcl kin . hs horizontal sync the signal is synchronized to rx clkin . note: output signals from any system shall be low o r high-impedance state when vdd is off. www.datasheet.co.kr datasheet pdf - http://www..net/
18 of 34 au optronics corporation product specification 6.3 integration interface and pin assignment 6.3.1 connector description physical interface is described as for the connecto r on module. these connectors are capable of accommodating the f ollowing signals and will be following components. connector name / designation for signal connector manufacturer ipex or compatible type / part number ipex 20455-040e-12 or compatible mating housing/part number ipex 20353-040t-11 or co mpatible 6.3.2 pin assignment lvds is a differential signal technology for lcd in terface and high speed data transfer device. pin signal description 1 nc no connection (reserve) 2 avdd powersupply,3.3v(typical) 3 avdd powersupply,3.3v(typical) 4 dvdd ddc 3.3vpower 5 nc no connection (reserve) 6 scl ddcclock 7 sda ddcdata 8 odd_rin0- -lvdsdifferential data input(r0-r5,g0) 9 odd_rin0+ +lvdsdifferential data input(r0-r5,g0) 10 gnd ground 11 odd_rin1- -lvdsdifferential data input(g1-g5,b0-b1 ) 12 odd_rin1+ +lvdsdifferential data input(g1-g5,b0-b1 ) 13 gnd ground 14 odd_rin2- -lvdsdifferential data input(b2-b5,hs,v s,de) 15 odd_rin2+ +lvdsdifferential data input(b2-b5,hs,vs ,de) 16 gnd ground 17 odd_clkin- -lvdsdifferential clock input 18 odd_clkin+ +lvdsdifferential clock input 19 gnd groundCshield 20 even_rin0- -lvdsdifferential data input(r0-r5,g0) 21 even_rin0+ +lvdsdifferential data input(r0-r5,g0) 22 gnd ground 23 even_rin1- -lvdsdifferential data input(g1-g5,b0-b 1) 24 even_rin1+ +lvdsdifferential data input(g1-g5,b0-b 1) www.datasheet.co.kr datasheet pdf - http://www..net/
19 of 34 au optronics corporation product specification 25 gnd ground 26 even_rin2- -lvdsdifferential data input(b2-b5,hs, vs,de) 27 even_rin2+ +lvdsdifferential data input(b2-b5,hs,v s,de) 28 gnd ground 29 even_clkin- -lvdsdifferential clock input 30 even_clkin+ +lvdsdifferential clock input 31 gnd groundCshield 32 vled_gnd led ground 33 vled_gnd led ground 34 nc no connection (reserve) 35 pwm system pwm logic input level 36 led_en led enable input level 37 nc no connection (reserve) 38 vled led power supply 39 vled led power supply 40 vled led power supply www.datasheet.co.kr datasheet pdf - http://www..net/
20 of 34 au optronics corporation product specification note1: input signals shall be low or high-impedance state when vdd is off. 1,nc 40,power www.datasheet.co.kr datasheet pdf - http://www..net/
21 of 34 au optronics corporation product specification 6.4 interface timing 6.4.1 timing characteristics basically, interface timings should match the 1920x 1080 /60hz manufacturing guide line timing. parameter symbol min. typ. max. unit frame rate - 50 60 - hz clock frequency 1/ t clock - 71.19 85 mhz period t v 1088 1130 - active t vd 1080 vertical section blanking t vb 8 50 - t line period t h 990 1050 - active t hd 960 horizontal section blanking t hb 30 90 - t clock note : de mode only 6.4.2 timing diagram dotclk de t h t hb t hd de t v t vb t vd input timing definition ( de mode) t clock input data pixel 1 pixel 2 pixel 3 pixel n-1 pixel n invaild data invaild data pixel 1 www.datasheet.co.kr datasheet pdf - http://www..net/
22 of 34 au optronics corporation product specification 6.5 power on/off sequence power on/off sequence is as follows. interface sign als and led on/off sequence are also shown in the chart. signals from any system shall b e hi-z state or low level when vdd is off power sequence timing value parameter min. max. units t1 0.5 10 t2 0 50 t3 200 - t4 200 - t5 0 50 t6 0 10 t7 500 - t8 10 - t9 10 180 t10 10 180 t11 10 - t12 0.5 10 ms www.datasheet.co.kr datasheet pdf - http://www..net/
23 of 34 au optronics corporation product specification note:if t3,t5,t6 couldnt match above specification s, must request t3+t5+t6 > 200ms at least 7. vibration and shock test 7.1 vibration test test spec: test method: non-operation acceleration: 1.5 g frequency: 10 - 500hz random sweep: 30 minutes each axis (x, y, z) 7.2 shock test spec: test spec: test method: non-operation acceleration: 220 g , half sine wave active time: 2 ms pulse: x,y,z .one time for each side 7.3. reliability items required condition note temperature humidity bias ta= 40 , 90%rh, 300h high temperature operation ta= 50 , dry, 300h low temperature operation ta= 0 , 300h high temperature storage ta= 60 , 35%rh, 300h low temperature storage ta= -20 , 50%rh, 300h thermal shock test ta=-20 to 60 , duration at 30 min, 100 cycles esd contact : 8 kv air : 15 kv note 1 note1: according to en 61000-4-2 , esd class b: some perf ormance degradation allowed. no data lost . self-recoverable. no hardware failures. remark: mtbf (excluding the led): 30,000 hours with a conf idence level 90% www.datasheet.co.kr datasheet pdf - http://www..net/
24 of 34 au optronics corporation product specification 8. mechanical characteristics 8.1 lcm outline dimension www.datasheet.co.kr datasheet pdf - http://www..net/
25 of 34 au optronics corporation product specification note: prevention ic damage, ic positions not allowe d any overlap over these areas. www.datasheet.co.kr datasheet pdf - http://www..net/
26 of 34 au optronics corporation product specification 8.2 screw hole depth and center position maximum screw penetration from side surface is 2.7 0.3mm (see drawing) screw hole center location, from front surface = 3. 10 0.3mm (see drawing) screw torque: maximum 2.5 kgf-cm www.datasheet.co.kr datasheet pdf - http://www..net/
27 of 34 au optronics corporation product specification 9. shipping and package 9.1 shipping label format www.datasheet.co.kr datasheet pdf - http://www..net/
28 of 34 au optronics corporation product specification 9.2. carton package 9.3 shipping package of palletizing sequence www.datasheet.co.kr datasheet pdf - http://www..net/
29 of 34 au optronics corporation product specification 10. appendix: edid description this cell color is fill in data for lcd supplier. please input two words for hex value. this cell color is auto calculation. this cell color is fixed data. auo this cell color is blank data. b154hw01 v4 lenovo requirements dv byte# byte# value value value value (decimal) (hex) field name and comments (hex) remarks (hex) (decimal ) (binary) remarks 0 00 header 00 edid vesa spec fixed 00 0 00000000 1 01 header ff edid vesa spec fixed ff 255 11111111 2 02 header ff edid vesa spec fixed ff 255 11111111 3 03 header ff edid vesa spec fixed ff 255 11111111 header 4 04 header ff edid vesa spec fixed ff 255 11111111 5 05 header ff edid vesa spec fixed ff 255 11111111 6 06 header ff edid vesa spec fixed ff 255 11111111 7 07 header 00 edid vesa spec fixed 00 0 00000000 8 08 30 30 48 00110000 9 09 id manufacturer name ae len ae 174 10101110 len 10 0a b2 b2 178 10110010 11 0b id product code 40 15.6"w 16:9 fhd 1920x1080 led b/l 40 64 01000000 15.6"w 16:9 fhd 1920x1080 led b/l 12 0c 00 not used 00 0 00000000 vender/ 13 0d 00 not used 00 0 00000000 product id 14 0e 00 not used 00 0 00000000 15 0f id serial number (32-bit serial number) 00 not used 00 0 00000000 # 0 16 10 week of manufacture 01 1 00000001 1 weeks 17 11 year of manufacture 13 19 00010011 2009 years 18 12 edid structure version 01 01 1 00000001 edid version/ 19 13 edid revision 03 ver. 1.3 03 3 00000011 ver. 1.3 revision 20 14 video input definition 80 digital 80 128 10000000 digital 21 15 max h image size( M ) 22 34 00100010 34cm display 22 16 max v image size( M ) 13 19 00010011 19cm parameter 23 17 display gamma 78 2.2 78 120 01111000 2.20 www.datasheet.co.kr datasheet pdf - http://www..net/
30 of 34 au optronics corporation product specification (gamma x 100)-100 24 18 feature support(dpms) ea lenovo spec fixed ea 234 11101010 standby , suspend , active off/very low power , rgb color display , preferred timing mode 25 19 red/green low bits 21 33 00100001 26 1a blue/white low bits 35 53 00110101 27 1b red x ad 173 10101101 0.676 28 1c red y 50 80 01010000 0.314 29 1d green x 37 55 00110111 0.215 color 30 1e green y aa 170 10101010 0.665 characteristic 31 1f blue x 24 36 00100100 0.141 32 20 blue y 11 17 00010001 0.069 33 21 white x 50 80 01010000 0.313 34 22 white y 54 84 01010100 0.329 35 23 established timing 1 00 lenovo spec fixed 00 0 00000000 established 36 24 established timing 2 00 lenovo spec fixed 00 0 00000000 timings 37 25 manufacturer's timings 00 00 0 00000000 38 26 01 lenovo spec fixed 01 1 00000001 39 27 standard timing identification #1 01 lenovo spec fixed 01 1 00000001 40 28 01 lenovo spec fixed 01 1 00000001 41 29 standard timing identification #2 01 lenovo spec fixed 01 1 00000001 42 2a 01 1 00000001 43 2b standard timing identification #3 01 1 00000001 44 2c 01 1 00000001 standard 45 2d standard timing identification #4 01 1 00000001 timing id 46 2e 01 1 00000001 47 2f standard timing identification #5 01 1 00000001 48 30 01 1 00000001 49 31 standard timing identification #6 01 1 00000001 50 32 01 1 00000001 51 33 standard timing identification #7 01 1 00000001 52 34 01 1 00000001 53 35 standard timing identification #8 01 1 00000001 54 36 pixel clock/10,000 (lsb) refresh rate 60hz 4c 76 01001100 139mhz (refresh rate 60 hz) www.datasheet.co.kr datasheet pdf - http://www..net/
31 of 34 au optronics corporation product specification 55 37 pixel clock/10,000 (msb) / 36 54 00110110 56 38 horizontal active 80 128 10000000 1920 pixels 57 39 horizontal blanking 82 130 10000010 130 pixels 58 3a horizontal active : horizontal blanking 70 112 01110000 59 3b vertical active 38 56 00111000 1080 lines 60 3c vertical blanking 32 50 00110010 50 lines 61 3d vertical active : vertical blanking 40 64 01000000 timing 62 3e horizontal sync. offset 3c 60 00111100 60 pixels descriptor 63 3f horizontal sync pulse width 30 48 00110000 48 pixels #1 64 40 vertical sync offset : sync width aa 170 10101010 10 lines / 10 lines 65 41 horizontal vertical sync offset/width upper 2bits 00 0 00000000 66 42 horizontal image size 58 88 01011000 344 mm 67 43 vertical image size c1 193 11000001 193 mm 68 44 horizontal & vertical image size 10 16 00010000 69 45 horizontal border 00 0 00000000 0 pixels 70 46 vertical border 00 0 00000000 0 lines 71 47 flags 18 24 00011000 non-interlaced , normal display, no stereo , digital separate , vertical polarity negative , horizontal polarity negative 72 48 pixel clock/10,000 (lsb) (slow refresh rate) 3f 63 00111111 73 49 pixel clock/10,000 (msb) / (slow refresh rate) refresh rate 50hz 2d 45 00101101 115.83mhz (refresh rate 50 hz) 74 4a horizontal active 80 128 10000000 1920 pixels 75 4b horizontal blanking 82 130 10000010 130 pixels 76 4c horizontal active : horizontal blanking 70 112 01110000 77 4d vertical active 38 56 00111000 1080 lines 78 4e vertical blanking 32 50 00110010 50 lines 79 4f vertical active : vertical blanking 40 64 01000000 timing 80 50 horizontal sync. offset 3c 60 00111100 60 pixels description 81 51 horizontal sync pulse 30 48 00110000 48 pixels #2 www.datasheet.co.kr datasheet pdf - http://www..net/
32 of 34 au optronics corporation product specification width 82 52 vertical sync offset : sync width aa 170 10101010 10 lines / 10 lines 83 53 horizontal vertical sync offset/width upper 2bits = 0 00 0 00000000 84 54 horizontal image size 58 88 01011000 344 mm 85 55 vertical image size c1 193 11000001 193 mm 86 56 horizontal & vertical image size 10 16 00010000 87 57 horizontal border 00 0 00000000 0 pixels 88 58 vertical border 00 0 00000000 0 lines 89 59 flags 18 24 00011000 non-interlaced , normal display, no stereo , digital separate , vertical polarity negative , horizontal polarity negative 90 5a flag 00 vesa spec fixed 00 0 00000000 91 5b flag 00 vesa spec fixed 00 0 00000000 92 5c flag 00 vesa spec fixed 00 0 00000000 93 5d data type tag 0f lenovo spec fixed 0f 15 00001111 description defined by manufacture 94 5e flag 00 vesa spec fixed 00 0 00000000 95 5f (horizontal active pixel /8)-31 d1 209 d1 209 11010001 1920 pixel 96 60 image aspect ratio 09 16 : 9 09 9 00001001 16 : 9 97 61 middle refresh rate 32 50 32 50 00110010 50 hz timing 98 62 (horizontal active pixel /8)-31 d1 209 d1 209 11010001 1920 pixel description 99 63 image aspect ratio 09 16 : 9 09 9 00001001 16 : 9 #3 100 64 low refresh rate 28 40 28 40 00101000 40 hz 101 65 brightness(1/10nit) 1b 270 1b 27 00011011 270 nit lenovo unique customization 102 66 feature flag 09 tn, white led b/l, 19 25 00011001 tn, white led backlight, bgr substripe design, 103 67 reserved 00 lenovo spec fixed 00 0 00000000 104 68 06 6 00000110 105 69 lcd supplier manufacture code (3 character id) af 175 10101111 auo 106 6a lcd supplier product 56 86 01010110 v www.datasheet.co.kr datasheet pdf - http://www..net/
33 of 34 au optronics corporation product specification code 107 6b lcd supplier product code 34 52 00110100 4 108 6c flag 00 vesa spec fixed 00 0 00000000 109 6d flag 00 vesa spec fixed 00 0 00000000 110 6e flag 00 vesa spec fixed 00 0 00000000 111 6f data type tag fe lenovo spec fixed fe 254 11111110 ascii string 112 70 flag 00 vesa spec fixed 00 0 00000000 113 71 model name 42 66 01000010 [b] 114 72 model name 31 49 00110001 [1] 115 73 model name 35 53 00110101 [5] timing 116 74 model name 36 54 00110110 [6] description 117 75 model name 48 72 01001000 [h] #4 118 76 model name 57 87 01010111 [w] 119 77 model name 30 48 00110000 [0] 120 78 model name 31 49 00110001 [1] 121 79 model name 20 32 00100000 [ ] 122 7a model name 56 86 01010110 [v] 123 7b model name 34 52 00110100 [4] 124 7c model name 20 32 00100000 [ ] 125 7d model name 0a 10 00001010 [^] 126 7e extension flag 00 vesa spec fixed 00 0 00000000 extension flag 127 7f checksum d6 214 11010110 127 7f checksum (auto calc from 00h - 7eh) d6 214 11010110 checksum pass checksum www.datasheet.co.kr datasheet pdf - http://www..net/
34 of 34 au optronics corporation product specification www.datasheet.co.kr datasheet pdf - http://www..net/

▲Up To Search▲

Price & Availability of B156HW01-V4

	To Download B156HW01-V4 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .