unisonic technologies co., ltd tip110a preliminary pnp silicon transistor www.unisonic.com.tw 1 of 3 copyright ? 2009 unisonic technologies co., ltd qw-r203-004.c low saturation voltage pnp darlington transistor ? description the utc tip110a is designed for using in general purpose amplifier and switching applications. ? features * low v ce(sat) * high current gain ? ordering information ordering number pin assignment lead free halogen free package 1 2 3 packing TIP110AL-TA3-T tip110ag-ta3-t to-220 b c e tube
tip110a preliminary pnp silicon transistor unisonic technologies co., ltd 2 of 3 www.unisonic.com.tw qw-r203-004.c ? absolute maximum ratings (ta=25 , unless otherwise specified) parameter symbol ratings unit collector to base voltage v cbo -45 v collector to emitter voltage v ceo -35 v emitter to base voltage v ebo -5 v collector current i c -10 a power dissipation p d 65 w junction temperature t j 150 storage temperature t stg -55 ~ +150 note: absolute maximum ratings are those values beyond which the device could be permanently damaged. absolute maximum ratings are stress ratings only and functional device oper ation is not implied. ? electrical characteristics (ta=25 , unless otherwise specified) parameter symbol test conditions min typ max unit collector-base breakdown voltage bv cbo i c =-10ma, i e =0a -45 collector-emitter breakdown voltage bv ceo i c =-1ma, i b =0a -35 v emitter-base breakdown voltage bv ebo i e =-10ma, i c =0a -5 collect cut-off current i cbo v cb =-45v, i e =0a -4 a collector-emitter cut-off current i ceo v ce =-35v, i b =0a -10 a emitter cut-off current i ebo v be =-5v, i c =0a -2.0 ma collector-emitter satu ration voltage v ce(sat) i c =-10a, i b =-0.1a -2.0 v base-emitter on voltage v be(on) v ce =-2.0v ,i c =-5ma -2.0 v h fe1 v ce =-2.0v ,i c =-0.5a 2000 60000 dc current gain h fe2 v ce =-2.0v ,i c =-10a 1000 60000
tip110a preliminary pnp silicon transistor unisonic technologies co., ltd 3 of 3 www.unisonic.com.tw qw-r203-004.c utc assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other parameters) listed in products specifications of any and all utc products described or contained herein. utc products are not designed for use in life support appliances, devices or systems where malfunction of these products can be reasonably expected to result in personal injury. reproduction in whole or in part is prohibited without the prior written consent of the copyright owner. the information presented in this document does not form part of any quotation or contract, is believed to be accurate and reliable and may be changed without notice.
|