* speci cations subject to change without notice. dimensions are in mm0.25 unless stated otherwise. idea, inc., 1351 titan way, brea, ca 92821 ph:714-525-3302, 800-led-idea; fax: 714-525-3304 catalog 995a a-31 t-1-3/4, right-angle led assembly G63XB series (snap-together style) the G63XB series of right-angle indicators is made from interlocking units. this series is available with leads cut to 4 mm as standard. in addition to the variety of lamps listed below, most t-1-3/4 leds, from blue to super bright red, can be special ordered. specify part desired as follows: g63nb/order code1 + ... + order code n; where n = number of segments. for example: g634b/i+3g designates an assembly with 1 red led on the left and 3 green leds to the right. it is recommended that n <= 8 to minimize handling dif culty and tolerance build up. order code and information (all ratings at 25 c ambient) led lamp typical characteristics recom. op. if (ma) epoxy & type color order code peak vf (v) iv (mcd) 2 1/2 (nm) @if=20ma @if=10ma (deg) tinted diffused resistor required red h 697 2.1 2.0 36 5-10 hi eff red i 635 2.0 9.0 36 10-20 green g 565 2.1 9.0 36 10-20 yellow y 585 2.0 7.0 36 10-20 tinted transparent high brightness hi eff red it 635 2.0 30 16 10-20 green gt 565 2.1 30 16 10-20 yellow yt 585 2.0 28 16 10-20 tinted diffused for 2ma operation red h2 697 2.0 1.6 @ 2ma 36 2-10 hi eff red i2 635 2.1 2.0 @ 2ma 36 2-10 green g2 565 2.0 2.0 @ 2ma 36 2-10 yellow y2 585 2.0 2.0 @ 2ma 36 2-10 tinted diffused 5v operation not available in this series. tinted diffused 12v operation white diffused bipolar, bicolor hi eff red/grn eg 635/565 2.1/2.0 2.5/2.5 54 10-20 yellow/green yg 585/565 2.1/2.0 2.5/2.5 54 10-20 red/green sg 660/570 1.8/2.2 6.0/2.5 - 10-20 6.4 x n.5 g63nb 1 2 3 ... n g631b 3.5 min 2.54 6.4.2 6.1.2 +, typ 4.8 51 8.8.3 4.1.5 4.7 0.5 g632b 12.8.3 12 19.2.3 g633b 123 25.6.5 g634b 12 34 (typ for bi-color) green anode red or yellow anode + (pinout for single color)
|