View SIZ730DT12_5348126.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

vishay siliconix siz730dt new product document number: 67648 s11-2380-rev. b, 28-nov-11 www.vishay.com 1 this document is subject to change without notice. the products described herein and this document ar e subject to specific disclaimers, set forth at www.vishay.com/doc?91000 n-channel 30 v (d-s) mosfets ordering information: siz730dt-t1-ge3 (lead (p b )-free and halogen-free) g 1 g 2 s 2 s 2 d 1 d 1 1 6 5 4 2 3 3.73 mm 6 mm powerpair ? 6 x 3.7 d 1 s 1 /d 2 pin 1 pin 7 d 1 s 2 n-channel 2 mosfet n-channel 1 mosfet g 1 s 1 /d 2 g 2 notes: a. package limited. b. surface mounted on 1" x 1" fr4 board. c. t = 10 s. d. see solder profile ( www.vishay.com/doc?73257 ). the powerpair is a leadless package. the end of the lead terminal is exposed copper (not plated) as a result of the singulation pr ocess in manufacturing. a solder fillet at the exposed copper tip cannot be guaranteed and is not required to ensure adequate bottom side solder interconnection. e. rework conditions: manual soldering with a sol dering iron is not recommended for leadless components. f. maximum under steady state conditions is 67 c/w for channel-1 and 65 c/w for channel-2. absolute maximum ratings (t a = 25 c, unless otherwise noted) parameter symbol channel-1 channel-2 unit drain-source voltage v ds 30 v gate-source voltage v gs 20 continuous drain current (t j = 150 c) t c = 25 c i d 16 a 35 a a t c = 70 c 16 a 35 a t a = 25 c 12.9 b, c 26.4 b, c t a = 70 c 10.3 b, c 21.1 b, c pulsed drain current (t = 300 s) i dm 70 100 continuous source drain diode current t c = 25 c i s 16 a 35 a t a = 25 c 3.2 b, c 3.8 b, c single pulse avalanche current l = 0.1 mh i as 16 30 single pulse avalanche energy e as 13 45 mj maximum power dissipation t c = 25 c p d 27 48 w t c = 70 c 17 31 t a = 25 c 3.9 b, c 4.6 b, c t a = 70 c 2.5 b, c 3 b, c operating junction and storage temperature range t j , t stg - 55 to 150 c soldering recommendations (peak temperature) d, e 260 thermal resistance ratings parameter symbol channel-1 channel-2 unit typ. max. typ. max. maximum junction-to-ambient b, f t ? 10 s r thja 24 32 20 27 c/w maximum junction-to-case (drain) steady state r thjc 3.5 4.6 2 2.6 product summary v ds (v) r ds(on) ( ? )i d (a) q g (typ.) channel-1 30 0.0093 at v gs = 10 v 16 a 7.7 nc 0.0130 at v gs = 4.5 v 16 a channel-2 30 0.0039 at v gs = 10 v 35 a 21.2 nc 0.0053 at v gs = 4.5 v 35 a features ? halo g en-free accordin g to iec 61249-2-21 definition ? trenchfet ? power mosfets ? 100 % r g and uis tested ? compliant to rohs directive 2002/95/ec applications ? system power - notebook - server ? pol ? synchronous buck converter
www.vishay.com 2 document number: 67648 s11-2380-rev. b, 28-nov-11 vishay siliconix siz730dt new product this document is subject to change without notice. the products described herein and this document ar e subject to specific disclaimers, set forth at www.vishay.com/doc?91000 notes: a. guaranteed by design, not s ubject to production testing. b. pulse test; pulse width ? 300 s, duty cycle ? 2 %. specifications (t j = 25 c, unless otherwise noted) parameter symbol test conditions min. typ. max. unit static drain-source breakdown voltage v ds v gs = 0 v, i d = 250 a ch-1 30 v v gs = 0 v, i d = 250 a ch-2 30 v ds temperature coefficient ? v ds /t j i d = 250 a ch-1 34 mv/c i d = 250 a ch-2 32 v gs(th) temperature coefficient ? v gs(th) /t j i d = 250 a ch-1 - 5 i d = 250 a ch-2 - 5 gate threshold voltage v gs(th) v ds = v gs , i d = 250 a ch-1 1 2.2 v v ds = v gs , i d = 250 a ch-2 1 2.2 gate source leakage i gss v ds = 0 v, v gs = 20 v ch-1 100 na ch-2 100 zero gate voltage drain current i dss v ds = 30 v, v gs = 0 v ch-1 1 a v ds = 30 v, v gs = 0 v ch-2 1 v ds = 30 v, v gs = 0 v, t j = 55 c ch-1 5 v ds = 30 v, v gs = 0 v, t j = 55 c ch-2 5 on-state drain current b i d(on) v ds ?? 5 v, v gs = 10 v ch-1 15 a v ds ?? 5 v, v gs = 10 v ch-2 20 drain-source on-state resistance b r ds(on) v gs = 10 v, i d = 15 a ch-1 0.0075 0.0093 ? v gs = 10 v, i d = 20 a ch-2 0.0032 0.0039 v gs = 4.5 v, i d = 13 a ch-1 0.0105 0.0130 v gs = 4.5 v, i d = 20 a ch-2 0.0043 0.0053 forward transconductance b g fs v ds = 15 v, i d = 15 a ch-1 48 s v ds = 15 v, i d = 20 a ch-2 80 dynamic a input capacitance c iss channel-1 v ds = 15 v, v gs = 0 v, f = 1 mhz channel-2 v ds = 10 v, v gs = 0 v, f = 1 mhz ch-1 830 pf ch-2 2370 output capacitance c oss ch-1 185 ch-2 475 reverse transfer capacitance c rss ch-1 80 ch-2 220 total gate charge q g v ds = 15 v, v gs = 10 v, i d = 15 a ch-1 15.6 24 nc v ds = 15 v, v gs = 10 v, i d = 20 a ch-2 43 65 channel-1 v ds = 15 v, v gs = 4.5 v, i d = 15 a channel-2 v ds = 15 v, v gs = 4.5 v, i d = 20 a ch-1 7.7 12 ch-2 21.2 32 gate-source charge q gs ch-1 2.6 ch-2 7 gate-drain charge q gd ch-1 3 ch-2 7.4 gate resistance r g f = 1 mhz ch-1 0.2 1 2 ? ch-2 0.2 0.8 1.6
document number: 67648 s11-2380-rev. b, 28-nov-11 www.vishay.com 3 vishay siliconix siz730dt new product this document is subject to change without notice. the products described herein and this document ar e subject to specific disclaimers, set forth at www.vishay.com/doc?91000 notes: a. guaranteed by design, not subject to production testing. b. pulse test; pulse width ? 300 s, duty cycle ? 2 %. stresses beyond those listed under ?absolute maximum ratings? may cause permanent damage to the device. these are stress rating s only, and functional operation of the device at these or any other conditions beyond those indi cated in the operational sections of the specifications is not implied. exposure to absolute maximum rating conditions for extended per iods may affect device reliability. specifications (t j = 25 c, unless otherwise noted) parameter symbol test conditions min. typ. max. unit dynamic a tu r n - o n d e l ay t i m e t d(on) channel-1 v dd = 15 v, r l = 1.5 ? i d ? 10 a, v gen = 4.5 v, r g = 1 ? channel-2 v dd = 15 v, r l = 1.5 ? i d ? 10 a, v gen = 4.5 v, r g = 1 ? ch-1 10 20 ns ch-2 20 40 rise time t r ch-1 15 30 ch-2 18 35 turn-off delay time t d(off) ch-1 15 30 ch-2 30 60 fall time t f ch-1 7 15 ch-2 10 20 tu r n - o n d e l ay t i m e t d(on) channel-1 v dd = 15 v, r l = 1.5 ? i d ? 10 a, v gen = 10 v, r g = 1 ? channel-2 v dd = 15 v, r l = 1.5 ? i d ? 10 a, v gen = 10 v, r g = 1 ? ch-1 5 10 ch-2 10 20 rise time t r ch-1 15 30 ch-2 15 30 turn-off delay time t d(off) ch-1 17 35 ch-2 30 60 fall time t f ch-1 7 15 ch-2 10 20 drain-source body diode characteristics continuous source-drain diode current i s t c = 25 c ch-1 16 a ch-2 35 pulse diode forward current a i sm ch-1 70 ch-2 100 body diode voltage v sd i s = 10 a, v gs = 0 v ch-1 0.8 1.2 v i s = 10 a, v gs = 0 v ch-2 0.78 1.2 body diode reverse recovery time t rr channel-1 i f = 10 a, di/dt = 100 a/s, t j = 25 c channel-2 i f = 10 a, di/dt = 100 a/s, t j = 25 c ch-1 15 30 ns ch-2 25 50 body diode reverse recovery charge q rr ch-1 6 12 nc ch-2 15 32 reverse recovery fall time t a ch-1 9 ns ch-2 13 reverse recovery rise time t b ch-1 6 ch-2 12
www.vishay.com 4 document number: 67648 s11-2380-rev. b, 28-nov-11 vishay siliconix siz730dt new product this document is subject to change without notice. the products described herein and this document ar e subject to specific disclaimers, set forth at www.vishay.com/doc?91000 channel-1 typical characteristics (25 c, unless otherwise noted) output characteristics on-resistance vs. drain current gate char g e 0 10 20 30 40 50 60 70 0.0 0.5 1.0 1.5 2.0 i d - drain current (a) v d s -drain-to- s ource voltage (v) v gs = 10 v thru 4 v v gs = 3 v 0.004 0.006 0.008 0.010 0.012 0.014 0 10 20 30 40 50 60 70 r d s (on) - on-resistance () i d -drain current (a) v gs = 4.5 v v gs = 10 v 0 2 4 6 8 10 0 3 6 9 12 15 18 v gs - g ate-to- s ource voltage (v) q g - total g ate charge (nc) v d s = 24 v i d = 15.2 a v d s = 15 v v d s = 7.5 v transfer characteristics capacitance on-resistance vs. junction temperature 0 4 8 12 16 20 0.0 0.5 1.0 1.5 2.0 2.5 3.0 i d - drain current (a) v gs - g ate-to- s ource voltage (v) t c = - 55 c t c = 25 c t c = 125 c 0 200 400 600 800 1000 1200 0 5 10 15 20 25 30 c - capacitance (pf) v d s -drain-to- s ource voltage (v) c iss c oss c rss 0.6 0.8 1.0 1.2 1.4 1.6 1.8 - 50 - 25 0 25 50 75 100 125 150 r d s (on) -on-resistance (normalized) t j - junction temperature ( c) v gs = 4.5 v i d = 15 a v gs
document number: 67648 s11-2380-rev. b, 28-nov-11 www.vishay.com 5 vishay siliconix siz730dt new product this document is subject to change without notice. the products described herein and this document ar e subject to specific disclaimers, set forth at www.vishay.com/doc?91000 channel-1 typical characteristics (25 c, unless otherwise noted) source-drain diode forward volta g e threshold volta g e 0.1 1 10 100 0.0 0.2 0.4 0.6 0.8 1.0 1.2 i s - s ource current (a) v s d - s ource-to-drain voltage (v) t j = 150 c t j = 25 c 0.8 1.0 1.2 1.4 1.6 1.8 2.0 - 50 - 25 0 25 50 75 100 125 150 v gs (th) (v) t j -temperature ( c) i d = 250 a on-resistance vs. gate-to-source volta g e sin g le pulse power 0.000 0.005 0.010 0.015 0.020 0.025 0.030 0246810 r d s (on) - on-resistance () v gs - g ate-to- s ource voltage (v) t j = 125 c t j = 25 c i d = 15 a 0 10 20 30 40 50 0.001 0.01 0.1 1 10 100 1000 power (w) time (s) safe operatin g area, junction-to-ambient 0.01 0.1 1 10 100 1000 0.1 1 10 100 i d - drain current (a) v d s -drain-to- s ource voltage (v) * v gs > minimum v gs at which r d s (on) is specified 10 s 100 s 100 ms 1 ms t s ingle pulse a = 25 c bvd ss limited 10 ms 1 s dc limited by r d s (on) *
www.vishay.com 6 document number: 67648 s11-2380-rev. b, 28-nov-11 vishay siliconix siz730dt new product this document is subject to change without notice. the products described herein and this document ar e subject to specific disclaimers, set forth at www.vishay.com/doc?91000 channel-1 typical characteristics (25 c, unless otherwise noted) * the power dissipation p d is based on t j(max) = 150 c, using junction-to-case thermal resistanc e, and is more useful in settling the upper dissipation limit for cases where additional heatsinking is used. it is used to deter mine the current rating, when this rating falls below the package limit. current deratin g * 0 10 20 30 40 50 0 25 50 75 100 125 150 i d - drain current (a) t c - case temperature ( c) package limited power junction-to-case 0 5 10 15 20 25 30 25 50 75 100 125 150 power (w) t c - case temperature ( c)
document number: 67648 s11-2380-rev. b, 28-nov-11 www.vishay.com 7 vishay siliconix siz730dt new product this document is subject to change without notice. the products described herein and this document ar e subject to specific disclaimers, set forth at www.vishay.com/doc?91000 channel-1 typical characteristics (25 c, unless otherwise noted) normalized thermal transient impedance, junction-to-ambient 0.01 0.1 1 0.0001 0.001 0.01 0.1 1 10 100 1000 normalized effective transient thermal impedance s quare wave pulse duration (s) duty cycle = 0.5 0.2 0.1 0.05 0.02 s ingle pulse t 1 t 2 n otes: p dm 1. d u ty cycle, d = 2. per unit base = r thja =67 c/ w 3. t jm -t a =p dm z thja (t) t 1 t 2 4. s u rface mo u nted normalized thermal transient impedance, junction-to-case 0.1 1 0.0001 0.001 0.01 0.1 normalized effective transient thermal impedance s quare wave pulse duration (s) duty cycle = 0.5 0.2 0.1 0.05 0.02 s ingle pulse
www.vishay.com 8 document number: 67648 s11-2380-rev. b, 28-nov-11 vishay siliconix siz730dt new product this document is subject to change without notice. the products described herein and this document ar e subject to specific disclaimers, set forth at www.vishay.com/doc?91000 channel-2 typical characteristics (25 c, unless otherwise noted) output characteristics on-resistance vs. drain current gate char g e 0 20 40 60 80 100 0.0 0.5 1.0 1.5 2.0 i d - drain current (a) v d s -drain-to- s ource voltage (v) v gs = 10 v thru 4 v v gs = 3 v 0.0020 0.0025 0.0030 0.0035 0.0040 0.0045 0.0050 0 20 40 60 80 100 r d s (on) - on-resistance () i d -drain current (a) v gs = 4.5 v v gs = 10 v 0 2 4 6 8 10 0 10 20 30 40 50 v gs - g ate-to- s ource voltage (v) q g -total g ate charge (nc) v d s = 7.5 v i d = 20 a v d s = 15 v v d s = 24 v transfer characteristics capacitance on-resistance vs. junction temperature 0 4 8 12 16 20 0.0 0.5 1.0 1.5 2.0 2.5 3.0 i d - drain current (a) v gs - g ate-to- s ource voltage (v) t c = 25 c t c = 125 c t c = - 55 c 0 500 1000 1500 2000 2500 3000 3500 0 5 10 15 20 25 30 c - capacitance (pf) v d s -drain-to- s ource voltage (v) c iss c oss c rss 0.6 0.8 1.0 1.2 1.4 1.6 1.8 - 50 - 25 0 25 50 75 100 125 150 r d s (on) -on-resistance (normalized) t j - junction temperature ( c) v gs = 4.5 v i d = 20 a v gs = 10 v
document number: 67648 s11-2380-rev. b, 28-nov-11 www.vishay.com 9 vishay siliconix siz730dt new product this document is subject to change without notice. the products described herein and this document ar e subject to specific disclaimers, set forth at www.vishay.com/doc?91000 channel-2 typical characteristics (25 c, unless otherwise noted) source-drain diode forward volta g e threshold volta g e 0.1 1 10 100 0.0 0.2 0.4 0.6 0.8 1.0 1.2 i s - s ource current (a) v s d - s ource-to-drain voltage (v) t j = 25 c t j = 150 c 0.6 0.8 1.0 1.2 1.4 1.6 1.8 - 50 - 25 0 25 50 75 100 125 150 v gs (th) (v) t j -temperature ( c) i d = 250 a on-resistance vs. gate-to-source sin g le pulse power 0.000 0.002 0.004 0.006 0.008 0.010 0246810 r d s (on) - on-resistance () v gs - g ate-to- s ource voltage (v) t j = 125 c t j = 25 c i d = 20 a 0 10 20 30 40 50 0.01 0.1 1 10 100 1000 power (w) time (s) safe operatin g area, junction-to-ambient 0.01 0.1 1 10 100 1000 0.01 0.1 1 10 100 i d - drain current (a) v d s -drain-to- s ource voltage (v) * v gs > minimum v gs at which r d s (on) is specified 10 s 100 s 100 ms limited by r d s (on) * 1 ms t s ingle pulse a = 25 c bvd ss limited 10 ms 1 s dc
www.vishay.com 10 document number: 67648 s11-2380-rev. b, 28-nov-11 vishay siliconix siz730dt new product this document is subject to change without notice. the products described herein and this document ar e subject to specific disclaimers, set forth at www.vishay.com/doc?91000 channel-2 typical characteristics (25 c, unless otherwise noted) * the power dissipation p d is based on t j(max) = 150 c, using junction-to-case thermal resistanc e, and is more useful in settling the upper dissipation limit for cases where additional heatsinking is used. it is used to deter mine the current rating, when this rating falls below the package limit. current deratin g * 0 20 40 60 80 100 0 25 50 75 100 125 150 i d - drain current (a) t c - case temperature ( c) package limited power junction-to-case 0 10 20 30 40 50 25 50 75 100 125 150 power (w) t c - case temperature ( c)
document number: 67648 s11-2380-rev. b, 28-nov-11 www.vishay.com 11 vishay siliconix siz730dt new product this document is subject to change without notice. the products described herein and this document ar e subject to specific disclaimers, set forth at www.vishay.com/doc?91000 channel-2 typical characteristics (25 c, unless otherwise noted) vishay siliconix maintains worldwide manufacturing capability. pr oducts may be manufactured at one of several qualified locatio ns. reliability data for silicon technology and package reliability represent a composite of all qualified locations. for related documents such as package/tape drawings, part marking, and reliability data, see www.vishay.com/ppg?67648 . normalized thermal transient impedance, junction-to-ambient 0.01 0.1 1 0.0001 0.001 0.01 0.1 1 10 100 1000 normalized effective transient thermal impedance s quare wave pulse duration (s) duty cycle = 0.5 0.2 0.1 0.05 0.02 s ingle pulse t 1 t 2 n otes: p dm 1. d u ty cycle, d = 2. per unit base = r thja =65 c/ w 3. t jm -t a =p dm z thja (t) t 1 t 2 4. s u rface mo u nted normalized thermal transient impedance, junction-to-case 0.1 1 0.0001 0.001 0.01 0.1 normalized effective transient thermal impedance s quare wave pulse duration (s) duty cycle = 0.5 0.2 0.1 s ingle pulse 0.02 0.05
document number: 69028 www.vishay.com 17-nov-08 1 package information vishay siliconix powerpair tm 6 x 3.7 case outline a1 e pin 1 b 1 z z pin 3 pin 2 pin 6 pin 5 pin 4 a k1 b e d1 e2 k2 l k k2 d1 e1 back side v iew d 0.10 c 2x 0.10 c 0.0 8 c pin #1 ident (optional) a 0.10 c 2x c c pin 4 pin 5 pin 6 pin 3 pin 2 pin 1 millimeters inches dim. min. nom. max. min. nom. max. a 0.70 0.75 0.80 0.028 0.030 0.032 a1 0.00 - 0.05 0.000 - 0.002 b 0.46 0.51 0.56 0.018 0.020 0.022 b1 0.20 0.25 0.38 0.008 0.010 0.015 c 0.18 0.20 0.23 0.007 0.008 0.009 d 3.65 3.73 3.81 0.144 0.147 0.150 d1 2.41 2.53 2.65 0.095 0.100 0.104 e 5.92 6.00 6.08 0.233 0.236 0.239 e1 2.62 2.67 2.72 0.103 0.105 0.107 e2 0.87 0.92 0.97 0.034 0.036 0.038 e 1.27 bsc 0.05 bsc k 0.45 typ. 0.018 typ. k1 0.66 typ. 0.026 typ. k2 0.60 typ. 0.024 typ. l 0.38 0.43 0.48 0.015 0.017 0.019 ecn: s-82772-rev. b, 17-nov-08 d w g: 5979
document number: 65278 www.vishay.com revision: 04-aug-09 1 pad pattern vishay siliconix recommended pad for powerpair? 6 x 3.7 0.0170 (0.432) recommended pad for po w erpair 6 x 3.7 dimensions in inches (mm) keep-o u t 0.3520 ( 8 .94) x 0.4390 (11.151) 0.3520 ( 8 .941) 0.0220 (0.559) 0, 0.11 0.0190 (0.4 8 3) 0.1040 (2.642) 0, 0.03 0, 0 0.4390 (11.151) 0.1070 (2.71 8 ) 0.0220 (0.559) 0.0170 (0.432) 0.03 8 0 (0.965) 0, - 0.0645 - 0.05, - 0.11 0, - 0.11 0.0500 (1.27) 1
legal disclaimer notice www.vishay.com vishay revision: 02-oct-12 1 document number: 91000 disclaimer all product, product specifications and data are subject to change without notice to improve reliability, function or design or otherwise. vishay intertechnology, inc., its affiliates, agents, and employee s, and all persons acting on it s or their behalf (collectivel y, vishay), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any o ther disclosure relating to any product. vishay makes no warranty, repres entation or guarantee regarding the suitabilit y of the products for any particular purpose or the continuing production of any product. to the maximum extent permitted by applicable law, vi shay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation specia l, consequential or incidental damages, and (iii) any and all i mplied warranties, including warra nties of fitness for particular purpose, non-infringement and merchantability. statements regarding the suitability of products for certain type s of applications are based on vishays knowledge of typical requirements that are often placed on vishay products in generic applications. such statements are not binding statements about the suitability of products for a particular application. it is the customers responsib ility to validate that a particu lar product with the properties descri bed in the product specification is suitable fo r use in a particular application. parameters provided in datasheets and/or specification s may vary in different applications an d performance may vary over time. all operating parameters, including typical pa rameters, must be validated for each customer application by the customers technical experts. product specifications do not expand or otherwise modify vish ays terms and condit ions of purchase, including but not limited to the warranty expressed therein. except as expressly indicate d in writing, vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the vi shay product could result in personal injury or death. customers using or selling vishay products not expressly indicated for use in such applications do so at their own risk. pleas e contact authorized vishay personnel to ob tain written terms and conditions regarding products designed for such applications. no license, express or implied, by estoppel or otherwise, to any intellectual prope rty rights is granted by this document or by any conduct of vishay. product names and markings noted herein may be trad emarks of their respective owners. material category policy vishay intertechnology, inc. hereby certi fies that all its products that are id entified as rohs-compliant fulfill the definitions and restrictions defined under directive 2011/65/eu of the euro pean parliament and of the council of june 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment (eee) - recast, unless otherwis e specified as non-compliant. please note that some vishay documentation may still make reference to rohs directive 2002/95/ ec. we confirm that all the products identified as being compliant to directive 2002 /95/ec conform to directive 2011/65/eu. vishay intertechnology, inc. hereby certifi es that all its products that are identified as ha logen-free follow halogen-free requirements as per jedec js709a stan dards. please note that some vishay documentation may still make reference to the iec 61249-2-21 definition. we co nfirm that all the products identified as being compliant to iec 61249-2-21 conform to jedec js709a standards.

▲Up To Search▲

Price & Availability of SIZ730DT12

	To Download SIZ730DT12 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .