3 electronic solutions division interconnect solutions http://www.3m.com/interconnects/ 3m is a trademark of 3m company. for technical, sales or ordering information call 800-225-5373 3m ? pin strip header single and dual row .100, .235/.318 mating length, straight & right angle, solder tails 929 series stackable ? gold, matte sn, or tin-lead plating options ? high temperature (pct) plastic for wave or ir ? soldering solder stand-off for wave soldering ? board pin retention feature option ? see regulatory information appendix (ria) for ? chemical compliance information date modif ed: november 6, 2008 ts-0769-e sheet 1 of 4 physical insulation: material: glass filled polyester (pbt) or high temperature (pct) flammability: ul 94v-0 color: black contact: material: copper alloy plating: underplating: 50 ? [1.27 m] nickel wiping area and solder tails: see ordering information (gold, matte tin, tin-lead options) marking: none electrical current rating: 2.5 a insulation resistance: > 5 10 9 at 500 v dc withstanding voltage: 1500 v rms at sea level environmental temperature rating: -40c to +105c process rating: 260c (per j-std-020c) for pct parts only (pbt insulator version), maximum insulator temperature 191c (solder wave process only) moisture sensitivity level: level 1 (per j-std-020c) for pct parts ul file no.: e68080
3 electronic solutions division interconnect solutions http://www.3m.com/interconnects/ 3m is a trademark of 3m company. for technical, sales or ordering information call 800-225-5373 3m ? pin strip header single and dual row .100, .235/.318 mating length, straight & right angle, solder tails 929 series ts-0769-e sheet 2 of 4 c after plating recommended hole pattern 2x .050 max "c" 0.1000.003 0.0400.003 "b" .015 [1.27] 0.115 [2.92] 0.075.005 [1.91] .070.010 [1.78] [2.54] [1.02] right angle solder wrap tails 0.170 [4.32] min pcb edge after plating "a".008 0.100 [2.54] 0.0250.001 sq. typ. 0.100 [2.54] typ 0.100.003 0.040.003 0.060 [1.52] "b".015 [0.64] [2.54] [1.02] straight solder wrap tails notes: 1. dimension c is a maximum when the pin strip is cut to length, not when the strip is broken to length. 2. board pin retention feature available: change from 9x9 to 9r9 when ordering. 3. breaking of dual row parts is not recommended. inch [mm] .005 .1 .01 tolerance unless noted .0 .00 .000 inch [ ] dimensions for reference only after plating recommended hole pattern "a".008 0.0250.001 sq. typ. 0.100.003 0.040.003 0.060 [1.52] "b".015 0.100 [2.54] 0.100 0.100 typ. [2.54] 2x .050 max. [1.27] [0.640] 0.100 [2.54] [2.54] [1.02] straight wirewrap tails after plating 0.100 [2.54] "c" 0.100.003 0.040.003 "b" .015 0.0750.005 0.0700.005 .215 0.100 [2.54] 0.100 [2.54] 0.100 [2.54] [5.46] [1.91] [1.78] [2.54] 0.170 [1.02] pcb edge
3 electronic solutions division interconnect solutions http://www.3m.com/interconnects/ 3m is a trademark of 3m company. for technical, sales or ordering information call 800-225-5373 3m ? pin strip header single and dual row .100, .235/.318 mating length, straight & right angle, solder tails 929 series ts-0769-e sheet 3 of 4 single row ordering information 9x9xxx-xx-xx-xx single row tail length code table 1 plating 3m part number tail length code dimensions a b gold 929647 straight 01 0.235 [5.97] 0.110 [2.79] 09 0.145 [3.68] 02 0.210 [5.33] 03 0.410 [10.41] 04 0.510 [12.95] 05 0.610 [15.49] 07 0.910 [23.11] 929648 right angle 01 0.235 [5.97] 0.110 [2.79] 929705 straight 01 0.318 [8.08] 0.110 [2.79] 11 0.125 [3.18] 09 0.145 [3.68] 06 0.710 [18.03] tin 929834 straight 01 0.235 [5.97] 0.110 [2.79] 02 0.210 [5.33] 03 0.410 [10.41] 04 0.510 [12.95] 05 0.610 [15.49] 07 0.910 [23.11] 929835 right angle 01 0.235 [5.97] 0.110 [2.79] 929700 straight 01 0.318 [8.08] 0.110 [2.79] 11 0.125 [3.18] 06 0.710 [18.03] 929730 right angle 01 0.318 [8.08] 0.110 [2.79] table 2 pin quantity per row dimension c (see note 1) 01 0.10 [2.5] 02 0.20 [5.1] 03 0.30 [7.6] 04 0.40 [10.2] 05 0.50 [12.7] 06 0.60 [15.2] 07 0.70 [17.8] 08 0.80 [20.3] 09 0.90 [22.9] 10 1.00 [25.4] 11 1.10 [27.9] 12 1.20 [30.5] 13 1.30 [33.0] 14 1.40 [35.6] 15 1.50 [38.1] 16 1.60 [40.6] 17 1.70 [43.2] 18 1.80 [45.7] 19 1.90 [48.3] 20 2.00 [50.8] 21 2.10 [53.3] 22 2.20 [55.9] 23 2.30 [58.4] 24 2.40 [61.0] 25 2.50 [63.5] 26 2.60 [66.0] 27 2.70 [68.6] 28 2.80 [71.1] 29 2.90 [73.7] 30 3.00 [76.2] 31 3.10 [78.7] 32 3.20 [81.3] 33 3.30 [83.8] 34 3.40 [86.4] 35 3.50 [88.9] 36 3.60 [91.4] gold 3m part number (select from table 1 based on dim a and plating) (see table1) pin quantity per row (see table 2) gold plating suffx location & thickness (see table 1) i = 10 ? [0.25 m] all over, pbt insulator (ria e1 & c1 apply) eu = 10 ? [0.25 m] all over, pct insulator (ria e1 & c1 apply) tail length code (see table 1) 9x9xxx-xx-xx-xx plating suffx: blank = 100 ? [2.54 m] tin-lead, pbt insulator (ria e3 & c2 apply) rk = 200 ? [5 m] matte tin, pct insulator (ria e1 & c1 apply) 3m part number (select from table 1 based on dim a and plating) (see table1) tail length code (see table 1) tin pin quantity per row (see table 2) 2 = no pin retention r = pin retention 2 = no pin retention r = pin retention
3 electronic solutions division interconnect solutions http://www.3m.com/interconnects/ 3m is a trademark of 3m company. for technical, sales or ordering information call 800-225-5373 3m ? pin strip header single and dual row .100, .235/.318 mating length, straight & right angle, solder tails 929 series ts-0769-e sheet 4 of 4 dual row tail length code table 3 plating 3m part number tail length code dimensions a b gold 929665 straight 01 0.235 [5.97] 0.110 [2.79] 09 0.145 [3.68] 02 0.210 [5.33] 08 0.310 [7.87] 03 0.410 [10.41] 04 0.510 [12.95] 05 0.610 [15.49] 929715 straight 01 0.318 [8.08] 0.110 [2.79] 11 0.125 [3.18] 10 0.175 [4.45] 03 0.410 [10.41] 06 0.710 [18.03] 929667 right angle 01 0.235 [5.97] 0.110 [2.79] 04 0.145 [3.68] 02 0.405 [10.29] 929745 right 01 0.318 [8.08] 0.110 [2.79] 02 0.405 [10.29] tin 929836 straight 01 0.235 [5.97] 0.110 [2.79] 09 0.145 [3.68] 02 0.210 [5.33] 08 0.310 [7.87] 03 0.410 [10.41] 04 0.510 [12.95] 05 0.610 [15.49] 929710 straight 01 0.318 [8.08] 0.110 [2.79] 11 0.125 [3.18] 09 0.145 [3.68] 10 0.175 [4.45] 03 0.410 [10.41] 06 0.710 [18.03] 929838 right angle 01 0.235 [5.97] 0.110 [2.79] 04 0.145 [3.68] 02 0.405 [10.29] table 4 pin quantity per row pin quantity total dual row dimension c (see note 1) 01 02 0.10 [2.5] 02 04 0.20 [5.1] 03 06 0.30 [7.6] 04 08 0.40 [10.2] 05 10 0.50 [12.7] 06 12 0.60 [15.2] 07 14 0.70 [17.8] 08 16 0.80 [20.3] 09 18 0.90 [22.9] 10 20 1.00 [25.4] 11 22 1.10 [27.9] 12 24 1.20 [30.5] 13 26 1.30 [33.0] 14 28 1.40 [35.6] 15 30 1.50 [38.1] 16 32 1.60 [40.6] 17 34 1.70 [43.2] 18 36 1.80 [45.7] 19 38 1.90 [48.3] 20 40 2.00 [50.8] 21 42 2.10 [53.3] 22 44 2.20 [55.9] 23 46 2.30 [58.4] 24 48 2.40 [61.0] 25 50 2.50 [63.5] 26 52 2.60 [66.0] 27 54 2.70 [68.6] 28 56 2.80 [71.1] 29 58 2.90 [73.7] 30 60 3.00 [76.2] 31 62 3.10 [78.7] 32 64 3.20 [81.3] 33 66 3.30 [83.8] 34 68 3.40 [86.4] 35 70 3.50 [88.9] 36 72 3.60 [91.4] dual row ordering information 9x9xxx-xx-xx-xx gold 3m part number (select from table 3 based on dim a and plating) (see table 3) pin quantity per row (see table 4) gold plating suffx location & thickness (see table 1) i = 10 ? [0.25 m] all over, pbt insulator (ria e1 & c1 apply) eu = 10 ? [0.25 m] all over, pct insulator (ria e1 & c1 apply) tail length code (see table 3) plating suffx: blank = 100 ? [2.54 m] tin-lead, pbt insulator (ria e3 & c2 apply) rk = 200 ? [5 m] matte tin, pct insulator (ria e1 & c1 apply) 3m part number (select from table 3 based on dim a and plating) (see table 3) tail length code (see table 3) pin quantity per row (see table 4) tin 9x9xxx-xx-xx-xx 2 = no pin retention r = pin retention 2 = no pin retention r = pin retention
regulatory information appendix 3m electronic solutions division/interconnect europe appendix e1: european union rohs directive 2002/95/ec, restriction of the use of certain hazardous substances in electrical & electronic equipment, as amended by eu commission decision 2005/618/ec. this product is rohs compliant 2005/95/ec. rohs compliant 2005/95/ec means that the product or part (product) does not contain any of the substances in excess of the maximum concentration values in eu directive 2002/95/ec, as amended by commission decision 2005/618/ec, unless the substance is in an application that is exempt under eu rohs. unless otherwise stated by 3m in writing, this information represents 3ms best knowledge and belief based upon information provided by third party suppliers to 3m. in the event any product is proven not to conform with 3ms regulatory information appendix, then 3ms entire liability and buyers exclusive remedy will be in accordance with the warranty stated below. appendix e2: european union rohs directive 2002/95/ec, restriction of the use of certain hazardous substances in electrical & electronic equipment, as amended by eu commission decision 2005/618/ec. this product contains lead in the compliant pin area in excess of the maximum concentration value allowed but is compliant by exemption under eu commission decision 2005/747/ec. rohs compliant 2005/95/ec means that the product or part (product) does not contain any of the substances in excess of the maximum concentration values in eu directive 2002/95/ec, as amended by commission decision 2005/618/ec, unless the substance is in an application that is exempt under eu rohs. unless otherwise stated by 3m in writing, this information represents 3ms best knowledge and belief based upon information provided by third party suppliers to 3m. in the event any product is proven not to conform with 3ms regulatory information appendix, then 3ms entire liability and buyers exclusive remedy will be in accordance with the warranty stated below. appendix e3: european union rohs directive 2002/95/ec, restriction of the use of certain hazardous substances in electrical & electronic equipment as amended by commission decision 2005/618/ec. this product contains lead in the solder tail area in excess of the maximum concentration value allowed. unless otherwise stated by 3m in writing, this information represents 3ms best knowledge and belief based upon information provided by third party suppliers to 3m. in the event any product is proven not to conform with 3ms regulatory information appendix, then 3ms entire liability and buyers exclusive remedy will be in accordance with the warranty stated below. appendix e4: european union rohs directive 2002/95/ec, restriction of the use of certain hazardous substances in electrical & electronic equipment, as amended by eu commission decision 2005/618/ec, as amended by eu commission decision 2005/717/ec, as amended by eu court of justice decision 2008/c 116/04 this product contains decabde in the insulating material in excess of the maximum concentration allowed for fnished products subject to eu rohs that are placed on the eu market after june 30, 2008. unless otherwise stated by 3m in writing, this information represents 3ms best knowledge and belief based upon information provided by third party suppliers to 3m. in the event any product is proven not to conform with 3ms regulatory information appendix, then 3ms entire liability and buyers exclusive remedy will be in accordance with the warranty stated below.product warranty stated below. ria-2217a-e
appendix e5: european union rohs directive 2002/95/ec, restriction of the use of certain hazardous substances in electrical and electronic equipment, as amended by eu commission decision 2005/618/ec. this product contains lead in excess of the maximum concentration value allowed but is compliant by exemption under item 6 of the annex to the directive. rohs compliant 2005/95/ec means that the product or part (product) does not contain any of the substances in excess of the maximum concentration values in eu directive 2002/95/ec, as amended by commission decision 2005/618/ec, unless the substance is in an application that is exempt under eu rohs. unless otherwise stated by 3m in writing, this information represents 3ms best knowledge and belief based upon information provided by third party suppliers to 3m. in the event any product is proven not to conform with 3ms regulatory information appendix, then 3ms entire liability and buyers exclusive remedy will be in accordance with the warranty stated below. china appendix c1: china rohs electronic industry standard of the peoples republic of china, sj/t11363-2006, requirements for concentration limits for certain hazardous substances in electronic information products. this symbol, per marking for the control of pollution caused by electronic information products, sj/t11364-2006, means that the product or part does not contain any of the following substances in excess of the following maximum concentration values in any homogeneous material: (a) 0.1% (by weight) for lead, mercury, hexavalent chromium, polybrominated biphenyls or polybrominated diphenyl ethers (excluding decabde); or (b) 0.01% (by weight) for cadmium. unless otherwise stated by 3m in writing, this information represents 3ms best knowledge and belief based upon information provided by third party suppliers to 3m. in the event any product is proven not to conform with 3ms regulatory information appendix, then 3ms entire liability and buyers exclusive remedy will be in accordance with the warranty stated below. appendix c2: china rohs electronic industry standard of the peoples republic of china, sj/t11363-2006, requirements for concentration limits for certain hazardous substances in electronic information products. this symbol, per marking for the control of pollution caused by electronic information products, sj/t11364-2006, means that the product or part does contain a substance, as detailed in the chart below, in excess of the following maximum concentration values in any homogeneous material: (a) 0.1% (by weight) for lead, mercury, hexavalent chromium, polybrominated biphenyls or polybrominated diphenyl ethers (excluding decabde); or (b) 0.01% (by weight) for cadmium. unless otherwise stated by 3m in writing, this information represents 3ms best knowledge and belief based upon information provided by third party suppliers to 3m. the numerical reference in the symbol above should not be construed as a representation regarding the products life or an extension of a product warranty. the product warranty is stated below. in the event any product is proven not to conform with 3ms regulatory information appendix, then 3ms entire liability and buyers exclusive remedy will be in accordance with the product warranty stated below. ria-2217a-e
important notice all statements, technical information, and recommendations related to 3ms products are based on information believed to be reliable, but the accuracy or completeness is not guaranteed. before using this product, you must evaluate it and determine if it is suitable for your intended application. you assume all risks and liability associated with such use. any statements related to the product which are not contained in 3ms current publications, or any contrary statements contained on your purchase order shall have no force or effect unless expressly agreed upon, in writing, by an authorized offcer of 3m. warranty; limited remedy; limited liability. this product will be free from defects in material and manufacture for a period of 90 days from the time of purchase. 3m makes no other warranties including, but not limited to, any implied warranty of merchantability or fitness for a particular purpose. if this product is defective within the warranty period stated above, your exclusive remedy shall be, at 3ms option, to replace or repair the 3m product or refund the purchase price of the 3m product. except where prohibited by law, 3m will not be liable for any indirect, special, incidental or consequential loss or damage arising from this 3m product, regardless of the legal theory asserted. please recycle. printed in usa. ? 3m 2008. all rights reserved. ria-2217a-e 3 3m electronics solutions division 6801 river place blvd. austin, tx 78726-9000 u.s.a. 1-800-225-5373 www.3m.com/interconnects 3m is a trademark of 3m company. appendix c3: china rohs electronic industry standard of the peoples republic of china s/t1133200 reuirements for concentration limits for certain haardous substances in electronic information products this symbol per maring for the control of pollution caused by electronic information products s/t1134200 means that the product or part does contain a substance as detailed in the chart belo in excess of the folloing maximum concentration values in any homogeneous material: a 01 by eight for lead mercury hexavalent chromium polybrominated biphenyls or polybrominated diphenyl ethers excluding decabde or b 001 by eight for cadmium unless otherise stated by 3m in riting this information represents 3ms best noledge and belief based upon information provided by third party suppliers to 3m the numerical reference in the symbol above should not be construed as a representation regarding the products life or an extension of a product arranty the product arranty is stated belo in the event any product is proven not to conform ith 3ms regulatory information appendix then 3ms entire liability and buyers exclusive remedy ill be in accordance ith the product arranty stated belo
mouser electronics authorized distributor click to view pricing, inventory, delivery & lifecycle information: 3m: ? 929647-01-04-i? 929647-01-06-i? 929647-01-07-i? 929647-01-08-i? 929647-01-12-i? 929647-01-16-i? 929647-01-20-i? 929647-01-28-i? 929647-02-03-i? 929647-02-16-i? 929647-03-02-i? 929647-03-03-i? 929647-03-06-i? 929647-03-18-i? 929647-09-01-i? 929647-09-03-i? 929647-09-04-i? 929647-09-05-i? 929647-09-07-i? 929647-09-08-i? 929647-09-12-i? 929647-09-18-i? 929647-09-24-i? 929648-01-01-i? 929648-01-07-i? 929665-01-03-i? 929665-01-04-i? 929665-01-06-i? 929665-01-08-i? 929665-01-09-i? 929665-01-11-i? 929665-01-16-i? 929665-01-20-i? 929665-01-21-i? 929665-01-22-i? 929665-01-25-i? 929665-01-26-i? 929665-09-01-i? 929665-09-02-i? 929665-09-07-i? 929665-09-08-i? 929665-09-11-i? 929665-09-13-i? 929665-09-16-i? 929665-09-26-i? 929665-09-31-i? 929667-01-01-i? 929667-01-10-i? 929667-04-12-i? 929667-04-20-i? 929705-01-01-i? 929705-01-08-i? 929705-01-33-i? 929705-01-34-i? 929705-11-03-i? 929710-01-02? 929710-01-03? 929710-01-05? 929710-01-10? 929710-01-12? 929710-01-13? 929710-01-15? 929710-01-16? 929710-01- 25? 929745-01-06-i? 929745-01-24-i? 929745-02-01-i? 929745-02-02-i? 929834-01-01? 929834-01-05? 929834-01-26? 929834-01-28? 929834-01-32? 929834-04-16? 929834-05-07? 929834-05-09? 929835-01-02? 929835-01-03? 929835-01- 07? 929835-01-09? 929835-01-10? 929835-01-15? 929835-01-17? 929835-01-18? 929835-01-20? 929835-01-26? 929836- 01-01? 929836-01-06? 929836-01-07? 929836-01-12? 929836-01-13? 929836-01-16? 929836-01-17? 929836-01-21? 929836-01-26? 929836-01-32? 929836-04-26? 929836-09-03? 929836-09-04? 929836-09-06
|
