product data sheet part number: 348220 revision level: 01 date: september 15, 2004 6sp 20 7/.0121 bc pvc oas pvc instrumentation cable a. construction diameters 1) conductor: #20 awg 7/28 tinned copper 0.036 no m. 2) insulation: 0.013 wall polyvinyl chloride 0.06 2 nom. 3) subcable: 12 conductors into 6 pairs @ 1.75 lh l with aluminum/polypropylene tape (foil in) & # 22 awg 7/ 30 tc drain wire over each pair. 0.128 nom. 4) color code: each pair black-white with number p rinted on pair in format 1-one, 2-two etc 5) communication conductor: 22 awg solid bare copper with 0.013 wall polyvinyl chloride C orange C printed communications wire 0.051 nom. 6) cable: 6 shielded pairs and communication conductor @ 3.00 lhl with aluminum/polypropylene tape (foil out) & # 22 awg 7/30 tc drain wire 0.330 nom. 7) jacket: 0.032 wall polyvinyl chloride C gray - ripcord under jacket 0.434 +/- 0.022 8) print legend: general cable (r) bicc brand (r) C8 pvic 6sps 20awg pvc/pvc shielded (ul) type pltc or itc 105c sun res (date c ode & seq ft) b. industry approvals national electrical code article 725 ul standard 13 type pltc ul subject 2250 type itc c. electrical properties 1) temperature: 105 c 2) suggested working voltage (vrms): 300vrms 3) conductor d.c. resistance: 9.33 ohms/1000 ft. n om. @ 20 c 4) shield resistance: 6.2 ohms/1000 ft. nom. @ 20 c 5) mutual capacitance: 43 pf/ft. @ 1khz nom. 6) ground capacitance: 77 pf/ft. @ 1khz nom. 7) characteristic impedance: 47 ohms @ 1 mhz nom. note: data are subject to change without notice. contact your customer service representative for la test information. formatted: bullets and numbering formatted: bullets and numbering formatted: bullets and numbering
|
