* speci cations subject to change without notice. dimensions are in mm0.25 unless stated otherwise. idea, inc., 1351 titan way, brea, ca 92821 ph:714-525-3302, 800-led-idea; fax: 714-525-3304 catalog 995a a-44 2 x 5 mm rectangular, single- or bi-color pcb mount right angle led array, G98XB series the G98XB right angle indicator is primarily designed to use the three-leaded bi-color led lamp which has pins spaced on 2.54 m m cen- ters in a single row. it has a wide stance and its length permits the front of the holder to protrude further from the edge of the pcb. standard 3-leaded bi-color lamps are common cathode. specify part desired as follows: (x = 2 for single color, tinted 2-leaded leds. x = 3 for 3-leaded G98XB/order code for example: g983b/eg designates an assembly with an orange red/green led. order code and information (all ratings at 25 c ambient) led lamp typical characteristics recom. op. if (ma) epoxy & type color order code peak vf (v) iv (mcd) 2 1/2 (nm) @if=20ma @if=10ma (deg) white diffused bipolar, bicolor hi eff red/grn eg 635/565 2.1/2.0 15/10 124 10-20 yellow/green yg 585/565 2.1/2.0 10/10 124 10-20 tinted diffused resistor required red h 697 2.1 2.3 124 5-10 hi eff red i 635 2.0 13 124 10-20 green g 565 2.1 8.5 124 10-20 yellow y 585 2.0 9.4 124 10-20 10.8 12.2 2 4 6.9 5.08 8.5 g983b 3-leaded, bi-color only 1 2 3 2.54 typ g982b 2-leaded, single color 12 2.54 5 connections pin 1 pin 2 pin 3 red+ common grn+ yel+ common grn+ anode cathode led type tri-color-eg (both chips on for amber) bi-color- yg single color-all listed
|