for price, delivery, and to place orders, please contact hittite microwave corporation: 20 alpha road, chelmsford, ma 01824 phone: 978-250-3343 fax: 978-250-3373 order on-line at www.hittite.com low noise amplifiers - smt 8 8 - 178 hmc565lc5 gaas smt phemt low noise amplifier, 6 - 20 ghz v02.0209 functional diagram general description the hmc565lc5 is a high dynamic range gaas phemt mmic low noise amplifi er housed in a leadless rohs compliant 5x5mm smt package. operating from 6 to 20 ghz, the hmc565lc5 features 21 db of small signal gain, 2.5 db noise fi gure and ip3 of +20 dbm across the operating band. this self-biased lna is ideal for microwave radios due to its single +3v supply operation, and dc blocked rf i/os. features noise figure: 2.5 db gain: 21 db oip3: 20 dbm single supply: +3v @ 53 ma 50 ohm matched input/output rohs compliant 5 x 5 mm package typical applications the hmc565lc5 is ideal for use as a lna or driver amplifi er for: ? point-to-point radios ? point-to-multi-point radios & vsat ? test equipment and sensors ? military & space electrical specifi cations, t a = +25 c, vdd 1, 2, 3 = +3v parameter min. typ. max. min. typ. max. units frequency range 6 - 12 12 - 20 ghz gain 19 21 16 18.5 db gain variation over temperature 0.025 0.035 0.025 0.035 db/ c noise figure 2.5 2.8 2.5 3 db input return loss 15 12 db output return loss 13 15 db output power for 1 db compression (p1db) 8 10 9 11 dbm saturated output power (psat) 11 13 dbm output third order intercept (ip3) 20 21 dbm total supply current (idd)(vdd = +3v) 53 75 53 75 ma
for price, delivery, and to place orders, please contact hittite microwave corporation: 20 alpha road, chelmsford, ma 01824 phone: 978-250-3343 fax: 978-250-3373 order on-line at www.hittite.com low noise amplifiers - smt 8 8 - 179 input return loss vs. temperature output return loss vs. temperature broadband gain & return loss gain vs. temperature noise figure vs. temperature output ip3 vs. temperature hmc565lc5 gaas smt phemt low noise amplifier, 6 - 20 ghz v02.0209 -30 -20 -10 0 10 20 30 0 5 10 15 20 25 30 s21 s11 s22 response (db) frequency (ghz) 0 5 10 15 20 25 30 5 7 9 11 13 15 17 19 21 +25c +85c -40c gain (db) frequency (ghz) -25 -20 -15 -10 -5 0 5 7 9 11 13 15 17 19 21 +25c +85c -40c return loss (db) frequency (ghz) 5 10 15 20 25 30 5 7 9 11 13 15 17 19 21 +25c +85c -40c ip3 (dbm) frequency (ghz) 0 2 4 6 8 10 5 7 9 11 13 15 17 19 21 +25c +85c -40c noise figure (db) frequency (ghz) -25 -20 -15 -10 -5 0 5 7 9 11 13 15 17 19 21 +25c +85c -40c return loss (db) frequency (ghz)
for price, delivery, and to place orders, please contact hittite microwave corporation: 20 alpha road, chelmsford, ma 01824 phone: 978-250-3343 fax: 978-250-3373 order on-line at www.hittite.com low noise amplifiers - smt 8 8 - 180 p1db vs. temperature power compression @ 12 ghz reverse isolation vs. temperature psat vs. temperature gain, noise figure & power vs. supply voltage @ 12 ghz hmc565lc5 gaas smt phemt low noise amplifier, 6 - 20 ghz v02.0209 -5 0 5 10 15 20 25 -20 -15 -10 -5 pout gain pae pout (dbm), gain (db), pae(%) input power (dbm) 0 5 10 15 20 25 0 1 2 3 4 5 6 7 8 9 10 2.5 3 3.5 gain (db), p1db (dbm) noise figure (db) vdd (vdc) gain p1db noise figure -60 -50 -40 -30 -20 -10 0 5 7 9 11 13 15 17 19 21 +25c +85c -40c isolation (db) frequency (ghz) 0 4 8 12 16 20 5 7 9 11 13 15 17 19 21 +25c +85c -40c psat (dbm) frequency (ghz) 0 4 8 12 16 20 5 7 9 11 13 15 17 19 21 +25c +85c -40c p1db (dbm) frequency (ghz)
for price, delivery, and to place orders, please contact hittite microwave corporation: 20 alpha road, chelmsford, ma 01824 phone: 978-250-3343 fax: 978-250-3373 order on-line at www.hittite.com low noise amplifiers - smt 8 8 - 181 outline drawing absolute maximum ratings drain bias voltage (vdd1, vdd2, vdd3) +3.5 vdc rf input power (rfin)(vdd = +3.0 vdc) 0 dbm channel temperature 175 c continuous pdiss (t= 85 c) (derate 8.5 mw/c above 85 c) 0.753 w thermal resistance (channel to ground paddle) 119. 5 c/ w storage temperature -65 to +150 c operating temperature -40 to +85 c esd sensitivity (hbm) class 1a vdd (vdc) idd (ma) +2.5 51 +3.0 53 +3.5 56 typical supply current vs. vdd notes: 1. package body material: alumina 2. lead and ground paddle plating: 30-80 microinches gold over 50 microinches minimum nickel 3. dimensions are in inches [millimeters] 4. lead spacing tolerance is non-cumulative 5. package warp shall not exceed 0.05mm datum 6. all ground leads and ground paddle must be soldered to pcb rf ground electrostatic sensitive device observe handling precautions hmc565lc5 gaas smt phemt low noise amplifier, 6 - 20 ghz v02.0209
for price, delivery, and to place orders, please contact hittite microwave corporation: 20 alpha road, chelmsford, ma 01824 phone: 978-250-3343 fax: 978-250-3373 order on-line at www.hittite.com low noise amplifiers - smt 8 8 - 182 pin descriptions pin number function description interface schematic 1, 2, 6 - 19, 23 - 25, 27, 29, 31, 32 n/c this pin may be connected to rf/dc ground. performance will not be affected. 3, 5, 20, 22 gnd these pins and package bottom must be connected to rf/dc ground. 4rfin this pin is ac coupled and matched to 50 ohms. 21 rfout this pin is ac coupled and matched to 50 ohms. 30, 28, 26 vdd1, 2, 3 power supply voltage for the amplifi er. external bypass capacitors of 100 pf and 2.2 f are required. application circuit component value c1, c2, c3 100 pf c4, c5, c6 2.2 f hmc565lc5 gaas smt phemt low noise amplifier, 6 - 20 ghz v02.0209
for price, delivery, and to place orders, please contact hittite microwave corporation: 20 alpha road, chelmsford, ma 01824 phone: 978-250-3343 fax: 978-250-3373 order on-line at www.hittite.com low noise amplifiers - smt 8 8 - 183 evaluation pcb list of materials for evaluation pcb 110431 [1] the circuit board used in the fi nal application should use rf circuit design techniques. signal lines should have 50 ohm impedance while the package ground leads and exposed paddle should be con- nected directly to the ground plane similar to that shown. a sufficient number of via holes should be used to connect the top and bottom ground planes. the evaluation board should be mounted to an appropriate heat sink. the evaluation circuit board shown is available from hittite upon request. item description j1 - j2 pcb mount k connector j3 2 mm dc header c1 - c3 100 pf capacitor, 0402 pkg. c4 - c6 2.2 f capacitor, tantalum u1 hmc565lc5 amplifi er pcb [2] 109001 evaluation pcb [1] reference this number when ordering complete evaluation pcb [2] circuit board material: rogers 4350 hmc565lc5 gaas smt phemt low noise amplifier, 6 - 20 ghz v02.0209
|
