.462 11.73 to tip of cable inner conductor .315 8.00 .105 2.67 .184 4.67 .215 5.46 .500 12.70 1.287 [32.69] when assembled .155 3.94 .312 7.92 .624 15.85 recommended cable trim dimensions .005 min chamfer catalog p/n: 0345-e00-c7201n notes: unless otherwise specified 1. designed for use with belden 1855a or equivalent cable. 2. material specifications: body: brass per astm b16. center contact: copper alloy. outer contact: copper alloy. insulator: teflon per astm d1710. ferrule: bronze c22000. 3. finish specifications: body: .000100 min nickel per ams-qq-n-290 over copper flash per astm b734 (rohs). center contact: .000030 min gold per astm b488 over .000080 min nickel per ams-qq-n-290 (rohs). outer contact: .000030 min gold per astm b488 over .000080 min nickel per ams-qq-n-290 (rohs). ferrule: .000050 min nickel per ams-qq-n-290 over .000050 min copper flash per astm b734 (rohs). 4. strip use kings kts-8-2. 5. crimp ferrule use kings kth-1000 & kth-2025(.178 hex). 6. interface per cecc 22230. 7. cap-e02. 8. electrical specifications: impedance: 75 ohms. frequency range: dc-6.0 ghz. return loss: <-20db up to 3.0 ghz, <-15db up to 6.0 ghz. 9. compliant to smpte 424m (3g-sdi) standard. p/n description qty 0345-e00-c7201n single pack 1 0345-e00-c7201nu bulk pack 400 a rev e SD0345-E00-C7201N ctc cy 11/03/10 by date appd revised per ecr-er28303 description e rev xx/xx/xx xxx date approved xx/xx/xx xxx date approved 05/28/08 dcam date approved 05/22/08 dw date drawn customer drawing per asme y14.5m-1994 unless otherwise specified: dimensions are in inches [mm] tolerances: decimal: .xx [x.x] .01 [0.3] .xxx [x.xx] .005 [0.13] .xxxx [x.xxx] .xxxx angles: 2 scale: 4:1 1 sht of 1 din 1.0/2.3 75 ohm plug for belden 1855a cable (rohs compliant) winchester electronics corporation 62 barnes industrial road north wallingford, connecticut 06492
|