published date : mar 22, 2008 drawing no : sdsa1425 v4 checked : b.l. liu p.1/4 part number: LUG13D 2mm flat top led lamp www.sunled.com notes: 1. all dimensions are in millimeters (inches). 2. tolerance is 0.25(0.01") unless otherwise noted. 3.specifications are subject to change without notice. features z mounts flush with panel. z low power consumption. z suitable for audio panel indicator. z fits 2mm hole in panel up to 3.5mm (.138"). z long life - solid state reliability. z rohs compliant. part number emitting color emitting material lens-color luminous intensity (if=10ma) mcd wavelength nm p viewing angle 2 1/2 min. typ. LUG13D green gap green diffused 3 9 565 70 absolute maximum ratings (t a =25c ) ug (gap) unit reverse voltage v r 5 v forward current i f 25 ma forward current (peak) 1/10 duty cycle 0.1ms pulse width i fs 140 ma power dissipation p t 62.5 mw operating temperature t a -40 ~ +85 storage temperature tstg -40 ~ +85 lead solder temperature [2mm below package base] 260c for 3 seconds c lead solder temperature [5mm below package base] 260c for 5 seconds ug (gap) unit forward voltage (typ.) (i f =10ma) v f 2.0 v forward voltage (max.) (i f =10ma) v f 2.5 v reverse current (max.) (v r =5v) i r 10 ua wavelength of peak emission (typ.) (i f =10ma) p 565 nm wavelength of dominant emission (typ.) (i f =10ma) d 568 nm spectral line full width at half-maximum (typ.) (i f =10ma) ? 30 nm capacitance (typ.) (vf=0v, f=1mhz) c 15 pf operating characteristics (t a =25c )
published date : mar 22, 2008 drawing no : sdsa1425 v4 checked : b.l. liu p.2/4 part number: LUG13D 2mm flat top led lamp www.sunled.com ? ug
published date : mar 22, 2008 drawing no : sdsa1425 v4 checked : b.l. liu p.3/4 part number: LUG13D 2mm flat top led lamp www.sunled.com remarks: if special sorting is required (e.g. binning based on forward vo ltage, luminous intensity / luminous flux or wavelength), the typical accuracy of the so rting process is as follows: 1. wavelength: +/-1nm 2. luminous intensity / luminous flux: +/-15% 3. forward voltage: +/-0.1v note: accuracy may depend on the sorting parameters.
published date : mar 22, 2008 drawing no : sdsa1425 v4 checked : b.l. liu p.4/4 part number: LUG13D 2mm flat top led lamp www.sunled.com packing & label specifications LUG13D
|
