15 allied components interna tional 714-665-1 140 www.a lli edcom pon en ts .com rohs 11/08/12 schematics dimensions:inch( mm) unless otherwise specified, all tolerances are 0.010(0.25) da tec ode 0.272 (6.90) 0.514(13.05)max 0.40 (10.0) max 0.250 (6.30) max 0.004 (0.10) min 0.050 (1.27) 0.018 (0.46) 0.020 (0.50) min 0~8 0.340 (6.61) 0.420 (10.67) 0.030(0.76) 0.050(1.27) 0.350(8.89) allied AHSC-1618PS all specifications subject to change without notice. mechanical 10/100 baset single port poe lan filter module AHSC-1618PS cw/w: 25pf typ @ 100khz, 0.2v polarity: 1-16, 6-11, in-phase ll: 0.5h max @ 100khz, 0.2v dcr: 1.1 operating temp: 0oc to +70oc max compliant to ieee802.3af / ansix3.263 poe applications with 350ma current capability electrical speci?cations @ 25c part number ocl(uh min) @ 100khz, 0.2v turns ratio chip: cable (5%) insertion loss (db max) return loss (db min) with 8ma dc bias 0.3-100mhz 0.3-30mhz 40mhz AHSC-1618PS 350 1ct:1ct(tx)/1ct:1ct(rx) -1.1 -18 -16 60-80mhz -12 50mhz -14.5 part number AHSC-1618PS electrical speci?cations @ 25c cross talk (db min) hi-pot (vrms) -35 1500 0.3-30mhz -40 80-100mhz -30 common mode rejection (db min) 60-100mhz -30 0.3-60mhz -35 60mhz isolation ?
|