mw155 120 watt medical adapter series ? 100-240 vac universal input ? pfc corrected ? low life-cycle operation cost ? desktop style ? complies with emi/rfi regulations ? ce compliant (lvd, emc, weee, rohs) ? impact resistant, non-vented polycarbonate enclosure ? ipx1 compliant ? modifed and custom designs also available ? meets energy star criteria level iv and eisa requirements see reverse side for details international safety standard approvals line and load excluding cord 1% voltage regulation ripple 1% vp-p max. transient response 5ms max. for 50% load change, slew rate of 0.1a/s protection cycle-by-cycle current limiting, automatic recovery for overload or short circuit; active latch- off otp; active latch-off ovp output specifcations voltage 100-240vac nominal line frequency 47-63hz input current 2.0a max. protection input fuse input specifcations thermal performance operating temperature 0 c to 40 c with no derating cooling convectional non-ventilated enclosure relative humidity non-condensing 5% to 95% altitude 0-10,000 feet storage temp -20 c to +85 c environmental specifcations topology two stage power conver - sion, current-mode control effciency energy star level iv certifcations ul60601-1, tuv-en60601-1, iec 60601-1 hold-up time 16.7ms min. mtbf 200,000 hours weight 24 oz (684 g) case and dimension 6.6l x 3.2w x 1.6h (in) 167l x 82w x 40h (mm) case material 94v-0 polycarbonate, black cord 6 ft (1.8m), 4-conductor, 18awg standard general specifcations specifcations sl power electronics corp ? 6050 king drive ? ventura, ca 93003 ? phone:805.486.4565 ? fax:805.487.8911 ? email:info@slpower.com ? www.slpower.com
mw155 120 watt medical adapter series for the most current data and application support visit www.slpower.com output max ault part number voltage min max watts mw155ra1251f01 12 v 0.00 a 9.17 a 110.0 w* mw155ra1551f01 15 v 0.00 a 7.33 a 110.0 w MW155RA1851F01 18 v 0.00 a 6.67 a 120.0 w mw155ra2451f01 24 v 0.00 a 5.00 a 120.0 w output currents mw155 r a 24 51 f 01 product manufacturing type output output input standard item family location revision voltage connector connector (other numbers name style style for custom) ault part number key input connectors shaver c8 (n) iec320 w /ground c14 (f) iec320 w /o ground c18 (q) australian (e) n. america/ japan (b) europe (m ) united kingdom (g) ault #51 minift over molded connector standard output connectors various output cord wire gauges and connector styles available. see ault connector style sheets for connector options power-on led active, latch-off over temperature protection circuit synchronous rectifcation private label marking optional features emi compliance en55011 and fcc conducted and radiated class b iec 61000-3-2 class d iec 61000-4-2 (esd), cd level 2 and ad level 3, criterion b iec 61000-4-3 (rfs), level 2, criterion a iec 61000-4-4 (eft), level 2, criterion a iec 61000-4-5 (surge), level 3, criterion b general specifcations (continued from p. 1) sl power electronics corp ? 6050 king drive ? ventura, ca 93003 ? phone:805.486.4565 ? fax:805.487.8911 ? email:info@slpower.com ? www.slpower.com data sheet ? 2008 sl power electronics corp. the information and specifcations contained in this data sheet are believed to be correct at time of publication. however, sl power accepts no responsibility for consequences arising from reproduction errors or inaccuracies. specifcations are subject to change without notice. rev.6/9/08 *12v model rated 100w with input voltages rated 100-110vac, 110w with input voltages rated 110vac-240vac the energy independence and security act of 2007 was passed in december of 2007 and addresses minimum effciency standards and standby levels for class a external power supplies that are 250 watts and under. this law stipulates that external power supplies manufactured on july 1, 2008 and beyond meet certain minimum effciency and standby criteria as defned below. minimum effciency criteria active mode is defned as when a power supplys input is connected to line voltage ac and its output is connected to a dc or ac load drawing a portion of the products power output. depending on the power rating for the power supply, it must meet the minimum effciency criteria outlined below. energy-effciency criteria for active mode: output power on minimum average adapter label effciency percentage 0 to less than 1 watt 0.50 * output power on adapter label > 1 to 51 watts [0.09 * ln (output power on adapter label )] + 0.50 > 51 watts 0.85 the power supply must also meet a requirement for when its input is connected to a line voltage ac but its output is not connected to a load. depending on the power output of the supply, it must keep its energy consumption below the following values. energy consumption criteria for no load mode: output power on maximum power consumption adapter label in no-load mode 0 to < 250 watts 0.5 watts 2007 energy independence and security act C eisa
|
