625 spectrum microwave ? 2144 franklin drive n.e. ? palm bay, florida 32905 ? phone: (888) 553-7531 ? fax: (888) 553-7532 spectrum control gmbh ? hansastrasse 6 ? 91126 schwabach, germany ? phone: (49)-9122-795-0 ? fax: (49)-9122-795-58 mixers microwave a spectrum control business s p e c t r u m inc. www.specwave.com electrical specifications (1) : double balanced mixer multi-octave band lo(ghz) 5.0-18.5 5.0-18.5 5.0-18.5 4.0-20.0 4.0-20.0 4.0-20.0 4.0-5.0 5.0-20.0 4.0-7.0 7.0-20.0 4.0-20.0 4.0-20.0 4.0-20.0 rf(ghz) 5.0-18.5 5.0-18.5 5.0-18.5 4.0-20.0 4.0-20.0 4.0-20.0 4.0-20.0 4.0-20.0 4.0-20.0 4.0-20.0 if(mhz) dc-500 dc-2000 dc-4000 dc-500 dc-2000 dc-4000 dc-4000 dc-4000 dc-4000 min 20 db 25 db 16 db 20 db typical 6.5 db 7.0 db 8.0 db 7.0 db 7.5 db 8.5 db 30 db 38 db 21 db 27 db 20 db +2 dbm +5 dbm +8 dbm +12 dbm +11 dbm +14 dbm +18 dbm +21 dbm +7 dbm +10 dbm +14 dbm +18 dbm max 8.0 db 8.5 db 9.5 db 9.5 db 10.0 db 11.5 db mm93 mm94 mm96 mm97 mm93 mm94 mm96 mm97 mm93 mm94 mm96 mm97 conditions specifications parameter ssb conversion loss: (2) (3) isolation lo to rf: lo to if: rf to if: input 1-db compression point: input third order intercept point: lo power: (4 ) model MM9XMS-3 model mm9xms-13 rf 4.0 to 20.0 ghz notes: 1. specifications are guaranteed when tested as a downconverter in a 50 ohm system at +25 ? c with the nominal lo power. specifications indicated as typical are not guaranteed. 2. noise figure is typically within 0.5 db of conversion loss for if frequencies greater than 10 mhz. 3. conversion loss typically degrades less than 0.5 db at +100 ? c and improves less than 0.5 db at -55 ? c. 4. usable lo drives are up to 2 db below and 3 db above nominal. mhz mhz typical performance at 25 ? c MM9XMS-3 mm9xms-13 lo power 3 = +7 dbm 4 = +10 dbm 6 = +14 dbm 7 = +18 dbm all dimensions are in inches and [mm]. outline: ms3c outline: ms3d
|