10 mm x 14 mm, fr-4 smd vcxo, lvpecl / lvds i606 series ilsi america phone: 775-851-8880 ? fax: 775-851-8882? e-mail: e-mail@ilsiamerica.com ? www.ilsiamerica.com 10/10_c specifications subject to change without n otice page 1 pin connection 1 voltage control 2 enable/disable 3 gnd 4 output 5 comp. outout 6 vcc dimension units: mm 0.5 typ. 10.2 max. 14.3 max. 6.0 max. 2.54 0.8 8.8 3.0 recommended pad layout product features: applications: small surface mount package sd/hd video low noise wireless base stations pb free/ rohs complient sonet /sdh compatible with leadfree processing server and storage frequency 1 mhz to 180.000 mhz output level lvds lvpecl vod = 393 mv typ., 475 mv max. ?0? = vcc - 1.63 v max. ?1? = vcc - 1.02 v min. duty cycle 50% 10% rise / fall time 0.6 ns max. output load lvds lvpecl 100 differential 50 to vcc - 2.0 vdc frequency stability 50 ppm max. start-up time 10 ms max. supply voltage 3.3 vdc 5% current lvds = 90 ma max., lvpecl = 130 ma max. linearity 15% max. pullability see table below control voltage 1.65 vdc 1.5 vdc input impedance 50k min. jitter <1.0 ps rms (12 khz to 20 mhz)* operating see operating temperature table in part number guide storage -55 c to +125 c note: a 0.01 f bypass capacitor is recommended between vcc (p in 6) and gnd (pin 3) to minimize power supply noise. *frequency related, for additional information contact your sale s representative. ** not available for all temperature ranges . part number guide sample part number: i606?1bc8h?155.520 package operating temperature stability (in ppm) pullability output enable / disable frequency i606 1 = 0 c to +70 c **d = 15 b = 50 ppm 8 = lvds h = enable -155.520 mhz 3 = -20 c to +70 c a = 25 c = 100 ppm 9 = lvpecl 2 = -40 c to +85 c b = 50 c = 100
10 mm x 14 mm, fr-4 smd vcxo, lvpecl / lvds i606 series ilsi america phone: 775-851-8880 ? fax: 775-851-8882? e-mail: e-mail@ilsiamerica.com ? www.ilsiamerica.com 10/10_c specifications subject to change without n otice page 2 pb free solder reflow profile: typical application: *units are backward compatible with 240c reflow processes package information: msl = n.a. (package does not contain plastic, storage life is unlimited under normal room conditions). termination = e4 (au over ni over w base metalization). tape and reel information: environmental specifications thermal shock mil-std-883, method 1011, condition a moisture resistance mil-std-883, method 1004 mechanical shock mil-std-883, method 2002, condition b mechanical vibration mil-std-883, method 2007, condition a resistance to soldering heat j-std-020c, tabl e 5-2 pb-free devices (except 2 cycles max) hazardous substance pb-free / rohs / green compliant solderability jesd22-b102-d method 2 (preconditioning e) terminal strength mil-std-883, method 2004, test condition d gross leak mil-std-883, method 1014, condition c fine leak mil-std-883, method 1014, condition a2, r1=2x10-8 atm cc/s solvent resistance mil-std-202, method 215 marking line 1: ilsi and date code (yww) line 2: xxxxx (i606- xxxxx - freq) line 3: frequency quantity per reel 1000 a 16 +/-.3 b 8 +/-.2 c 7.5 +/-.2 d 17.5 +/-1 e 50 / 60 / 80 f 180 / 250
|