View RF3602D_6140346.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

www.rfm.com e-mail: info@rfm.com page 1 of 10 ?2009-2010 by rf monolithics, inc. RF3602D - 3/3/10 electrical characteristics electrical connections characteristic sym notes min typ max units center frequency f c 305.3 mhz 1 db bandwidth bw 1 12.5 mhz maximum insertion loss, 303.325 to 307.300 mhz il max 1.8 2.0 db amplitude ripple, p-p, 303.325 to 307.300 mhz 1.0 rejection referenced to insertion loss at 303.825 mhz: dc to 285.3 mhz 37 40 335.3 to 355.3 mhz 27 30 355.3 to 755.3 mhz 44 47 755.3 to 1255.3 mhz 50 53 1255.3 to 2000 mhz 26 29 source impedance z s 50 ? balanced load impedance z l 150 ? case style sm3838-8 3.8 x 3.8 mm nominal footprint lid symbolization (y=year, ww=week, s=shift) dot=pin 1 indicator 885, ywws standard reel quantity reel size 7 inch 500 pieces/reel reel size 13 inch 3000 pieces/reel connection terminals single-ended port 6 balanced port 1, 3 case ground 4, 5, 7, 8 no connection 2 ? 303.325 to 307.300 mhz filter optimized for use with the trc105 transceiver balanced 150 ohm ic interface complies with directive 2002/95/ec (rohs) absolute maximum ratings rating value units input power level +15 dbm dc voltage 5 v operating temperature range -40 to +85 c storage temperature range in tape and reel -40 to +85 c 305.3 mhz saw filter RF3602D 1. unless noted otherwise, all specifications apply over the operating temperature range with filter soldered to the specified d emonstration board with impedance matching to 50 ? and measured with 50 ? network analyzer. 2. unless noted otherwise, all frequency specifications are referenced to the nominal center frequency, fc. 3. rejection is measured as attenuation below the minimum il point in the passband. rejection in final user application is depen dent on pcb layout and external impedance matching design. see application note no. 42 for details. 4. the design, manufacturing process, and specifications of this filter are subject to change. 5. us and international patents may apply. 6. rfm, stylized rfm logo, and rf monolithics, inc. are registered trademarks of rf monolithics, inc. pb caution: electrostatic sensitive device. observe precautions for handling. notes: sm3838-8 preliminary
www.rfm.com e-mail: info@rfm.com page 2 of 10 ?2009-2010 by rf monolithics, inc. RF3602D - 3/3/10

! " #
www.rfm.com e-mail: info@rfm.com page 3 of 10 ?2009-2010 by rf monolithics, inc. RF3602D - 3/3/10 RF3602D broadband response, 200 to 2000 mhz
www.rfm.com e-mail: info@rfm.com page 4 of 10 ?2009-2010 by rf monolithics, inc. RF3602D - 3/3/10 RF3602D response, 205 to 405 mhz
www.rfm.com e-mail: info@rfm.com page 5 of 10 ?2009-2010 by rf monolithics, inc. RF3602D - 3/3/10 RF3602D response, 255 to 355 mhz
www.rfm.com e-mail: info@rfm.com page 6 of 10 ?2009-2010 by rf monolithics, inc. RF3602D - 3/3/10 RF3602D passband response
www.rfm.com e-mail: info@rfm.com page 7 of 10 ?2009-2010 by rf monolithics, inc. RF3602D - 3/3/10 RF3602D input impedance plot
www.rfm.com e-mail: info@rfm.com page 8 of 10 ?2009-2010 by rf monolithics, inc. RF3602D - 3/3/10 RF3602D balanced output impedance plot
www.rfm.com e-mail: info@rfm.com page 9 of 10 ?2009-2010 by rf monolithics, inc. RF3602D - 3/3/10 case dimensions dimension mm inches min nom max min nom max a 3.6 3.8 4.0 0.142 0.150 0.157 b 3.6 3.8 4.0 0.142 0.150 0.157 c 0.90 1.00 1.1 0.035 0.040 0.043 d 0.80 0.90 1.0 0.031 0.035 0.040 e 0.90 1.00 1.10 0.035 0.040 0.043 f 0.50 0.60 0.70 0.020 0.024 0.028 g 2.39 2.54 2.69 0.090 0.100 0.110 h 1.40 1.75 2.05 0.055 0.069 0.080 materials solder pad plating 0.3 to 1.0 m gold over 1.27 to 8.89 m nickel lid plating 2.0 to 3.0 m nickel body al 2 o 3 ceramic pb free 8-terminal ceramic surface-mount case 3.8 x 3.8 mm nominal footprint top view bottom view 0.066 0.055 typ. (1.68) (1.40) 0 . 0 2 9 t y p . ( o . 7 4 ) 0 . 0 5 0 t y p . ( 1 . 2 7 ) 0 . 0 0 2 ( 0 . 0 5 ) 0 . 0 9 0 ( 2 . 2 9 ) 0 . 0 3 3 ( 0 . 8 4 ) pcb footprint a 1 2 3 b 7 6 5 4 c h 7 6 5 4 e f g 1 2 3 8 8 d 885 ywws
www.rfm.com e-mail: info@rfm.com page 10 of 10 ?2009-2010 by rf monolithics, inc. RF3602D - 3/3/10 tape and reel specifications ?b ? nominal size quantity per reel inches millimeters 7 178 500 13 330 3000 see detail "a" 1 3 . 0 2 0 . 2 2.0 12.0 1 0 0 r e f . " b " r e f . component orientation and dimensions carrier tape dimensions ao 4.25 mm bo 4.25 mm ko 1.30 mm pitch 8.0 mm w12.0 mm ro.3 (max.) ko section a-a 0.3 0.05 section b-b bo 2.0 4.0 ao pitch bb a r0.5 (max.) a 5 . 5 1 2 . 0 1 . 7 5 1.5 1.50 pin #1 user direction of feed

▲Up To Search▲

Price & Availability of RF3602D

	To Download RF3602D Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .