document number 3032 issue 1 zt91 semelab plc. telephone +44(0)1455 556565. fax +44(0)1455 552612. e-mail: sales@semelab.co.uk website: http://www.semelab.co.uk semelab plc reserves the right to change test conditions, parameter limits and package dimensions without notice. information f urnished by semelab is believed to be both accurate and reliable at the time of going to press. however semelab assumes no responsibility for any errors or omi ssions discovered in its use. semelab encourages customers to verify that datasheets are current before placing orders. medium power silicon npn planar transistor general purpose npn transistor in a hermetic to39 package. v ceo = 100v i c = 1a p tot = 5w 120v 100v 6v 100v 1a 1w 2.9w 5w 175c/w ?65 to 175c mechanical data dimensions in mm (inches) to39 package (to-205ad) absolute maximum ratings (t case = 25c unless otherwise stated) pin 1 = emitter underside view pin 2 = base pin 3 = collector 0.89 (0.035) max. 12.70 (0.500) min. 0.41 (0.016) 0.53 (0.021) dia. 5.08 (0.200) typ. 0.71 (0.028) 0.86 (0.034) 2.54 (0.100) 45 6.10 (0.240) 6.60 (0.260) 8.51 (0.34) 9.40 (0.37) 7.75 (0.305) 8.51 (0.335) 1 2 3 0.74 (0.029) 1.14 (0.045) v cbo collector ? base voltage v ceo collector ? emitter voltage v ebo emitter ? base voltage v cer collector ? emitter sustaining voltage i c collector current p tot dissipation @ t amb = 25 c @ case temp. = 100 c @ case temp. = 25 c derating linearly t stg, t j storage and operatuing junction temperature
100 1.2 1.5 1 60 0.1 30 40 120 60 250 6 25 100 parameter test conditions min. typ. max. unit document number 3032 issue 1 zt91 semelab plc. telephone +44(0)1455 556565. fax +44(0)1455 552612. e-mail: sales@semelab.co.uk website: http://www.semelab.co.uk semelab plc reserves the right to change test conditions, parameter limits and package dimensions without notice. information f urnished by semelab is believed to be both accurate and reliable at the time of going to press. however semelab assumes no responsibility for any errors or omi ssions discovered in its use. semelab encourages customers to verify that datasheets are current before placing orders. electrical characteristics (t case = 25 c unless otherwise stated) i c = 10ma i b = 0 i c = 200ma i b = 20ma i c = 200ma i b = 20ma v cb =v ce i e = 0 t amb = 100 c v eb = 5v i c = 0 v ce = 10v i c = 10ma v ce = 10v i c = 200ma v ce = 10v i c = 50ma f = 10mhz v ce = 10v i c = 300 a f = 1khz v cb = 10v f = 0 v eb = 1v f = 0 v ceo(sus) collector ? emitter sustaining voltage v ce(sat) collector ? emitter saturation voltage v be(sat) base ? emitter saturation voltage i cbo collector cut-off current i ebo emitter - base reverse current h fe dc current gain ft gain bandwidth product nf noise figure c ob output capacitance c ib input capacitance v ma a ? mhz db pf
|