lite-on technology corporation property of lite-on only part no.: LTC-5336Y page: 1 of 5 bns-od-c131/a4 features 0.52 inch (13.2 mm) digit height. continuous uniform segments. low power requirement. excellent characters appearance. high brightness & high contrast. wide viewing angle. solid state reliability. categorized for luminous intensity. lead-free package ( according to rohs). description the LTC-5336Y is a 0.52 inch (13.2 mm) digit height triple digit seven-segment display. this device utilizes yellow led chips, which are made from gaasp on a transparent gap substrate, and has a gray face and white segments. device part no. description yellow LTC-5336Y common cathode rt. hand decimal
lite-on technology corporation property of lite-on only part no.: LTC-5336Y page: 2 of 5 bns-od-c131/a4 package dimensions notes: 1.all dimensions are in millimeters. tolerances are 0.25 mm (0.01?) unless otherwise noted. 2.pin tip?s shift tolerance is + 0.4 mm. internal circuit diagram
lite-on technology corporation property of lite-on only part no.: LTC-5336Y page: 3 of 5 bns-od-c131/a4 pin connection no. connection no. connection 1 anode e (digit 1) 16 anode b (digit 3) 2 anode d (digit 1) 17 anode a (digit 3) 3 common cathode (digit 1) 18 common cathode (digit 3) 4 anode c (digit 1) 19 anode f (digit 3) 5 anode d.p. (digit 1) 20 anode g (digit 3) 6 anode e (digit 2) 21 anode b (digit 2) 7 anode d (digit 2) 22 anode a (digit 2) 8 common cathode (digit 2) 23 common cathode (digit 2) 9 anode c (digit 2) 24 anode f (digit 2) 10 anode d.p. (digit 2) 25 anode g (digit 2) 11 anode e (digit 3) 26 anode b (digit 1) 12 anode d (digit 3) 27 anode a (digit 1) 13 common cathode (digit 3) 28 common cathode (digit 1) 14 anode c (digit 3) 29 anode f (digit 1) 15 anode d.p.(digit 3) 30 anode g (digit 1)
lite-on technology corporation property of lite-on only part no.: LTC-5336Y page: 4 of 5 bns-od-c131/a4 absolute maximum rating at ta=25 o c parameter maximum rating unit power dissipation per segment 60 mw peak forward current per segment ( 1/10 duty cycle, 0.1ms pulse width ) 80 ma continuous forward current per segment derating linear from 25 per segment 25 0.27 ma ma/ reverse voltage per segment 5 v operating temperature range -35 to +105 storage temperature range -35 to +105 solder conditions: 1/16 inch below seating plane for 3 seconds at 260 ., or temperature of unit (during assembly) not over max. temperature rating above electrical / optical characteristics at ta=25 o c parameter symbol min. typ. max. unit test condition average luminous intensity i v 800 2200 cd i f =10ma peak emission wavelength p 585 nm i f =20ma spectral line half-width ? 35 nm i f =20ma dominant wavelength d 588 nm i f =20ma forward voltage per segment v f 2.1 2.6 v i f =20ma reverse current per segment i r 100 a v r =5v luminous intensity matching ratio (similar light area) i v -m 2:1 i f =10ma note: luminous intensity is measured with a light sensor and filter combination that approximates the cie (commision internationale de l?eclairage) eye-response curve.
lite-on technology corporation property of lite-on only part no.: LTC-5336Y page: 5 of 5 bns-od-c131/a4 typical electrical / optical characteristic curves (25 o c ambient temperature unless otherwise noted)
|
