designed & dimensioned in millimeters[inches] this product manufactured with lead-free processing pb do not scale from this print sub-BNC7T-P-C-XX-ST-CA6 fig.1 BNC7T-P-C-XX-ST-CA6 shown bnc7t-p-c-x-st-ca6-pin bnc-fer-001-x 3.2 .13 5.4 .21 11.9 .47 -ca6: rg-6 cable -st: straight -c: cable -p: plug termination orientation plating specification type gender BNC7T-P-C-XX-ST-CA6 -mn: medium gold/nickel (see notes 7 & 8) (sub-bnc7t-p-c-n-st-ca6) (bnc7-p-c-m-st-ca6-pin) (bnc-fer-001-n) c recommended cable stripping d d d sheet of unless otherwise specified dimensions are in millimeters [inches] tolerances are: decimals angles .x: 0.3 [.01] 2 .xx: 0.13 [.005] .xxx: 0.051 [.0020] material: true 75 ohm bnc straight plug rg-6 by: BNC7T-P-C-XX-ST-CA6 dwg. no. description: proprietary note this document contains information confidential and proprietary to samtec, inc. and shall not be reproduced or transferred to other documents or disclosed to others or used for any purpose other than that which it was obtained without the expressed written consent of samtec, inc. do not scale drawing g. herman 09/29/2008 3 1 sheet scale: 1:1 f:\dwg\misc\mktg\BNC7T-P-C-XX-ST-CA6-mkt.slddrw 520 park east blvd, new albany, in 47150 phone: 812-944-6733 fax: 812-948-5047 e-mail: info@samtec.com code: 55322 notes: 1. represents a critical dimension. 2. pushout force for center contact: 26.69 n [6.0 lb] min. 3. see sheet 3 for termination information. 4. note deleted. 5. product to be packaged per packaging standard co-hd-wi-3040-m. 6. rohs compliant. 7. component plating designations: -m: .000010" min. gold over .000050" min. nickel. -n: .000100" min. nickel. 8. assembly plating designations: -mn: (center contact)-m: (outer contact)-n: (remaining metal parts)-n: shell, ferrule, nut: brass contact: brass dielectric: ptfe gasket: silicone revision d
21.70 ref .854 14.50 ref .571 6.85 ref .270 15.20 .598 ref 9.00 .354 ref 7.60 ref .299 10.00 .394 ref 1.57 .062 ref 1.12 .044 ref 12.65 ref .498 1.35 ref .053 scale 5:1 sheet of true 75 ohm bnc straight plug rg-6 by: BNC7T-P-C-XX-ST-CA6 dwg. no. description: proprietary note this document contains information confidential and proprietary to samtec, inc. and shall not be reproduced or transferred to other documents or disclosed to others or used for any purpose other than that which it was obtained without the expressed written consent of samtec, inc. do not scale drawing g. herman 09/29/2008 3 2 sheet scale: 2:1 revision d f:\dwg\misc\mktg\BNC7T-P-C-XX-ST-CA6-mkt.slddrw 520 park east blvd, new albany, in 47150 phone: 812-944-6733 fax: 812-948-5047 e-mail: info@samtec.com code: 55322
3.2 ref .13 5.4 ref .21 11.9 ref .47 rg6 cable 25.0 2.5 .98 .10 hst-0.500-01-blk bnc-fer-001-x 'a' sub-BNC7T-P-C-XX-ST-CA6 8.17 (hex crimp) .322 (across 2 faces) 0.25 max gap allowable .010 c c 0.6 [.03] max gap allowable 0.16 - 0.03 + 0.17 .006 - .001 + .007 (to center contact) detail 'a' scale 4 : 1 c 0.10 max gap allowable .004 c 6.85 .270 (min. flared id) bnc7t-p-c-x-st-ca6-pin strip and tin inner conductor add heat shrink tube and ferrule solder signal pin add sub-BNC7T-P-C-XX-ST-CA6 crimp ferrule (use rf crimp hand tool #cat-ht-126667-21 or equivalent) apply heat shrink tube flare braided shield and add signal pin cable foil wrap to be inserted inside cable body d sheet of true 75 ohm bnc straight plug rg-6 by: BNC7T-P-C-XX-ST-CA6 dwg. no. description: proprietary note this document contains information confidential and proprietary to samtec, inc. and shall not be reproduced or transferred to other documents or disclosed to others or used for any purpose other than that which it was obtained without the expressed written consent of samtec, inc. do not scale drawing g. herman 09/29/2008 3 3 sheet scale: 1:1 revision d f:\dwg\misc\mktg\BNC7T-P-C-XX-ST-CA6-mkt.slddrw 520 park east blvd, new albany, in 47150 phone: 812-944-6733 fax: 812-948-5047 e-mail: info@samtec.com code: 55322
|
