vicor corp. tel: 800-735-6200, 978-470-2900 fax: 978-475-6715 vi-j00 minimod dc-dc converters 25 to 100 watts rev. 2.7 page 1 of 5 set your site on vicor at vicorpower.com product highlights the vi-j00 minimod family established a new standard in component-level dc-dc converters. this junior size complement to the higher power vi-200 family offers up to 100 w of isolated and regulated power in a board mounted package. with thousands of input/output/power combinations, and with a maximum operating temperature rating of 100?c, the minimod provides nearly unlimited flexibiliy for power system designers to meet demanding time to market requirements. utilizing vicors zero-current-sw itching forward converter tec hnology, proven by an installed base of over 8 million units, the minimod family combines state of the art power density with the efficiency, low noise and reliability required by next generation power systems. features ? rohs compliant (ve versions) ? up to 50 watts per cubic inch ? culus, ctvus ? ce marked ? up to 90% efficiency ? size: 2.28" x 2.4" x 0.5" (57,9 x 61,0 x 12,7) ? remote sense and current limit ? logic disable ? wide range output adjust ? zcs power architecture ? low noise fm control ? isolated output data sheet vi-j00, ve-j00 half brick dc-dc converters 25 to 100 watts low line voltage 75% transient [a] vin 2 3.3 5 5.2 5.5 5.8 6.5 7.5 10 12 13.8 15 18.5 24 28 36 40 48 52 72 85 95 nom. (range) max power designators zy 0xwvtrm1p 2n 3l jk4 hfdb 12 (10-20) n/ a 22 0 xxyyyyyyxxxxxxxxxxxxxx 24 (10-36) n/ a n/ a v --yyyyyyyyyyyyyyyyy-------- 24 (21-32) 18 36 1 wwwwwwx x wwwwwwwwwwwwww 24 (18-36) n/ a n/ a w wwwwwwx x wwwwwwwwwwwwww 36 (21-56) 18 60 2 yyyyyyyyxxxxxxxxxxx------ 48 (42-60) 36 72 3 wwwwwwx x wwwwwwwwwwwwww 48 (36-76) n/ a n/ a n ww x x x x x xwwwwwwwwwwwwww 72 (55-100) 45 110 4 wwwwwwx x wwwwwwwwwwwwww 110 (66-160) n/ a n/ a t ww x x x x x xwwwwwwwwwwww-- -- 150 (100-200) 85 215 5 wwwwwwx x wwwwwwwwwwwwww 150 (100-375) n/ a n/ a 7 yyyyyyyyxxxxxxxxxxx------ 300 (200-400) 170 425 6 wwwwwwx x wwwwwwwwwwwwww vi j 6 1 c w family series input output grade power vi = non-rohs j =j00 0 = 12 v n =48v z =2v m =10v k =40v e = ?10 to 100c 5 v <5 ve = rohs v = 24 v 4 =72v y =3.3v 1 =12v 4 =48v c = ?25 to 100c w = 100 w w = 20 a 1 =24v t = 110 v 0 =5v p = 13.8 v h =52v i = ? 40 to 100c x = 75 w x = 15 a w =24v 5 = 150 v x =5.2v 2 =15v f =72v m = ?55 to 100c y = 50 w y = 10 a 2 =36v 6 = 300 v w =5.5v n = 18.5 v d =85v z = 25 w z =5 a 3 =48v 7 = 150/300 v v =5.8v 3 =24v b =95v t =6.5v l =28v r =7.5v j =36v part numbering [ a ] tr a nsient volt a ge for 1 second. vout designators output input maximum power available for vi-jxx-xx note: for a ddition a l p a ck a ging options, ple a se see p a ge 4.
vicor corp. tel: 800-735-6200, 978-470-2900 fax: 978-475-6715 vi-j00 minimod dc-dc converters 25 to 100 watts rev. 2.7 page 2 of 5 set your site on vicor at vicorpower.com converter specifications (typical at t bp = 25c, nominal line and 75% load, unless otherwise specified) vi-j00 e-grade vi-j00 c-, i-, m-grade parameter min typ max min typ max units test conditions inr u sh ch a rge 60 x 10 -6 60 x 10 -6 100 x 10 -6 co u lom b s nomin a l line inp u t reflected 10% 10% i in nomin a l line, f u ll lo a d ripple c u rrent ? pp inp u t ripple rejection db 120 hz, nomin a l line db 2400 hz, nomin a l line no lo a d power dissip a tion 1.35 2 1.35 2 w a tts 25 + 20 log ( vin ) vout 30 + 20 log ( vin ) vout 20 + 20 log ( vin ) vout vi-j00 e-grade vi-j00 c-, i-, m-grade parameter min typ max min typ max units test conditions setpoint a cc u r a cy 1% 2% 0.5% 1% v nom lo a d/line reg u l a tion 0.5% 0.05% 0.2% v nom ll to hl, 10% to f u ll lo a d 1% 0.2% 0.5% v nom ll to hl, no lo a d to 10% o u tp u t temper a t u re drift 0.02 0.01 0.02 % / c over r a ted temper a t u re long term drift 0.02 0.02 % / 1k ho u rs o u tp u t ripple ? pp: 2 v, 3.3 v 200 100 150 mv 20 mhz ba ndwidth 5 v 5% 2% 3% v nom 20 mhz ba ndwidth 10 ? 95 v 3% 0.75% 1.5% v nom 20 mhz ba ndwidth tr i m r a nge [ a ] 50% 110% 50% 110% v nom to t a l remote 0.5 0.5 volts 0.25 v m a x. neg. leg sense compens a tion c u rrent limit 105% 135% 105% 125% i f u ll lo a d a u tom a tic rest a rt short circ u it c u rrent 105% 140% 105% 130% i f u ll lo a d a u tom a tic rest a rt vi-j00 e-grade vi-j00 c-, i-, m-grade parameter min typ max min typ max units test conditions g a te o u t imped a nce 50 50 ohms g a te in imped a nce 1000 1000 ohms g a te in high threshold 6 6 volts use open collector g a te in low threshold 0.65 0.65 volts g a te in low c u rrent 6 6 ma [ a ] 10 v, 12 v, 13.8 v, 15 v o u tp u ts, or ?v? inp u t r a nge h a ve st a nd a rd trim r a nge 10%. cons u lt f a ctory for wider trim r a nge. 95 v o u tp u t ?50 + 0% trim r a nge. input specifications output characteristics control pin specifications
vicor corp. tel: 800-735-6200, 978-470-2900 fax: 978-475-6715 vi-j00 minimod dc-dc converters 25 to 100 watts rev. 2.7 page 3 of 5 set your site on vicor at vicorpower.com converter specifications (typical at t bp = 25c, nominal line and 75% load, unless otherwise specified) vi-j00 e-grade vi-j00 c-, i-, m-grade parameter min typ max min typ max units test conditions inp u t to o u tp u t 3,000 3,000 v rms b a sepl a te e a rthed o u tp u t to ba sepl a te 500 500 v rms inp u t to ba sepl a te 1,500 1,500 v rms vi-j00 e-grade vi-j00 c-, i-, m-grade parameter min typ max min typ max units test conditions efficiency 78 ? 88% 80 ? 90% b a sepl a te to sink 0.14 0.14 c/w a tt with vicor p/n 20267 vi-j00 e-, c-grade vi-j00 i-, m-grade parameter min typ max min typ max units test conditions weight 2.9 3.2 3.6 3.4 3.8 4.1 o u nces 82.8 92 101.2 96.3 107 117.7 gr a ms dielectric withstand characteristics thermal characteristics mechanical specifications parameter storage operating units notes e -20 to +105 -10 to + 100 c c -40 to +105 -25 to + 100 c i -55 to +105 -40 to + 100 c m -65 to +105 -55 to + 100 c product grade temperatures
vicor corp. tel: 800-735-6200, 978-470-2900 fax: 978-475-6715 vi-j00 minimod dc-dc converters 25 to 100 watts rev. 2.7 page 4 of 5 set your site on vicor at vicorpower.com mechanical drawing 5 6 7 8 9 4 3 2 1 0.080 di a (2) pl a ces 0.080 di a (2) pl a ces solder pl a te m a tte tin over copper over copper a lloy a lloy 0.040 (1,0) di a (7) pl a ces 0.040 di a (7) pl a ces m a tte tin over copper solder pl a te over copper a lloy a lloy .01 al u min u m b a se prod u ct id this s u rf a ce f u nction +in -in +o u t trim ?sense ?o u t pin # 1 2 3 4 5 6 7 8 9 full r +.030 (0,76) -.000 (0) (5,6) min. (7,6) min. (44,4) m a x. (61,0) (57,9) (3,0) (12,7) 1.90 .65 (16,5) .49 (12,4) .30 .015 (7,6) (0,38) .15 2.10 (53,4) (33,0) .40 (10,2) .35 .015 (8,9) (0,38) 1.40 (35,6) 1.00 (25,4) .70 (17,8) g a te in g a te o u t +sense vi-j00 2.28 1.30 (3,8) .15 (3,8) (48,3) .22 .12 .50 .30 2.40 1.75 st a nd a rd rohs st a nd a rd rohs flangeless package flangeless package with integral heat sink to order the slimmod configuration add the suffix ? ? s? to the standard module part number. qty (2) grounding clips are included with each slimmod p/n 32187 available with longitudinal or transverse fins of 0.25"(6.35 mm) or 0.50"(12.7 mm) height. add the appropriate suffix to the module part number. qty (4) grounding clips are included with each finmod f1, f2 p/n 32185 f3, f4 p/n 32186 to order the busmod fully assembled, add suffix ??b1? to the standard module part number. to order the b u smod sep a r a tely: half-sized busmod ? p/n 18952 see b u smod mech a nic a l dr a wings for more det a ils. 2.28"l x 1.80"w x 0.50"h (57,9 x 45,7 x 12,7 mm) longitudinal, 0.25"(6.35 mm) fins ? add suffix ?? f1? longitudinal, 0.50"(12.7 mm) fins ? add suffix ?? f2? transverse, 0.25"(6.35 mm) fins ? add suffix ?? f3? transverse, 0.50"(12.7 mm) fins ? add suffix ?? f4? packaging options 2.28"l x 2.40"w x 1.08"h (57,9 x 61,0 x 27,4 mm) 1 up ? 2.58 x 2.5 x 0.62 (65,5 x 63,5 x 15,7 mm) 2 up ? 2.58 x 4.9 x 0.62 (65,5 x 124,5 x 15,7 mm) 3 up ? 2.58 x 7.3 x 0.62 (65,5 x 185,4 x 15,7 mm) megamod jr. ch a ssis mo u nt a ltern a tives, one, two, or three o u tp u ts: u p to 300 w busmod
vicor corp. tel: 800-735-6200, 978-470-2900 fax: 978-475-6715 vi-j00 minimod dc-dc converters 25 to 100 watts rev. 2.7 2/2012 set your site on vicor at vicorpower.com vicor?s comprehensive line of power solutions includes high density ac-dc and dc-dc modules and accessory components, fully configurable ac-dc and dc-dc power supplies, and complete custom power systems. information furnished by vicor is believed to be accurate and reliable. however, no responsibility is assumed by vicor for its use. vicor makes no representations or warranties with respect to the accuracy or completeness of the contents of this publication. vicor reserves the right to make changes to any products, specifications, and product descriptions at any time without notice. information published by vicor has been checked and is believed to be accurate at the time it was printed; however, vicor assumes no responsibility for inaccuracies. testing and other quality con- trols are used to the extent vicor deems necessary to support vicor?s product warranty. except where mandated by government re quirements, testing of all parameters of each product is not necessarily performed. specifications are subject to change without notice. vicor?s standard terms and conditions all sales are subject to vicor?s standard terms and conditions of sale, which are available on vicor?s webpage or upon request. product warranty in vicor?s standard terms and conditions of sale, vicor warrants that its products are free from non-conformity to its standard specifications (the ?express limited warranty?). this warranty is extended only to the original buyer for the period expiring two (2) years after the date of shipment and is not transferable. unless otherwise expressly stated in a written sales agreement signed by a duly authorized vicor signatory, vicor dis- claims all representations, liabilities, and warranties of any kind (whether arising by implication or by operation of law) with respect to the products, including, without limitation, any warranties or representations as to merchantability, fit- ness for particular purpose, infringement of any patent, copyright, or other intellectual property right, or any other mat- ter. this warranty does not extend to products subjected to misuse, accident, or improper application, maintenance, or storage. vicor shall not be liable for collateral or consequential damage. vicor disclaims any and all liability arising out of the application or use of any product or circuit and assumes no liability for applications assistance or buyer product design. buyers are responsible for their products and applications using vicor prod- ucts and components. prior to using or distributing any products that include vicor components, buyers should provide adequate design, testing and operating safeguards. vicor will repair or replace defective products in accordance with its own best judgment. for service under this warranty, the buyer must contact vicor to obtain a return material authorization (rma) number and shipping instructions. products returned without prior authorization will be returned to the buyer. the buyer will pay all charges incurred in returning the product to the factory. vicor will pay all reshipment charges if the product was defective within the terms of this warranty. life support policy vicor?s products are not authorized for use as critical components in life support devices or systems without the express prior written approval of the chief executive officer and general counsel of vicor corporation. as used herein, life support devices or systems are devices which (a) are intended for surgical implant into the body, or (b) support or sustain life and whose failure to perform when properly used in accordance with instructions for use provided in the labeling can be reasonably expected to result in a significant injury to the user. a critical component is any component in a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system or to affect its safety or effectiveness. per vicor terms and conditions of sale, the user of vicor products and components in life support applications assumes all risks of such use and indemnifies vicor against all liability and damages. intellectual property notice vicor and its subsidiaries own intellectual property (including issued u.s. and foreign patents and pending patent applications) relating to the prod- ucts described in this data sheet. no license, whether express, implied, or arising by estoppel or otherwise, to any intellectual property rights is granted by this document. interested parties should contact vicor's intellectual property department. vicor corporation 25 frontage road andover, ma, usa 01810 tel: 800-735-6200 fax: 978-475-6715 email customer service: custserv@vicorpower.com technical support: apps@vicorpower.com
|
