model : t yp e: qt3 transistor outline cr y stal oscillator e q uivalent militar y desi g nation: m55310/10 = qt3t, /13 = qt3c fre q uenc y stabilit y vs tem p erature screened output logic fre q uenc y o p tions ttl cmos ** hcmos/acmos 400 hz to 64 mhz 0.01 hz to 15 mhz (5 to 15 v) 0.03 hz to 60 mhz ** indicate supply voltage : qt3c9m-16.000 mhz, 15 v pin confi g uration code % ppm temp 1 .01 100 0c to +70c 4 .005 50 0c to +70c 3** .0005 5 0c to +50c 5 .0025 25 -20c to +70c 6 .005 50 -55c to +105c 9 .005 50 -55c to +125c 10 .01 100 -55c to +125c 11 .005 50 -40c to +85c 12 .01 100 -40c to +85c ** requires external tuning capacitors. consult the factory for pin connections. for frequencies above 30 mhz, consult the factory. for frequency stability vs. temperature options not listed herein, request a custom part number. vcc gnd out case itp 8 4 5 4 2, 6, 7 pa g e 1 of 3 standar d 07-ma r -2007 mhtml:file://y:\cp l\03062007\qtec\qt3.mht
screened phase noise factor y options output logic * output logic can drive up to 200 pf load with typical 6 ns rise & fall time (tr, tf). t c hc ac l z ttl cmos high speed cmos a dvanced cmos low voltage, 3.3 v special cmos* d = tristate output (add "d" as a suffix to the above listed options) electrical s p ecifications item ttl cmos hc/acmos*** supply voltage 5 v 10% 5.0 to 15.0 v 5 v 10%** supply current (typical) 66 to 80 mhz: 60 ma 50 to 66 mhz: 40 ma 27 to 50 mhz: 25 ma 6.5 to 27 mhz: 12 ma .01 hz to 6.5 mhz: 20 ma 2 to 4 ma @ 5v and 6 mhz special supply voltage or current available. ultra low current for battery operation also available. hc = 6 ma @ 10 mhz ac = 20 ma @ 35 mhz special supply voltage or current available. ultra low current for battery operation also available. load > 30 mhz: 6 ttl < 30 mhz: 10 ttl typical 10 k ohm shunted with 15 pf. capacitor typical 2 ma drive. can drive 1 ttl load. symmetry* 8 mhz: 60/40% < 8 mhz: 45/55% 4 to 15 mhz: 60/40% < 4 mhz: 45/55% 10 mhz: 60/40% < 10 mhz: 45/55% * optional symmetry selections ar e 45/55 or 47.5/52.5 custom symmetry is also available upon request. ** parts are available with suppl y range of 2.5 to 6 volts. *** low voltage logic ava liable, vcc = 3.3 v 10%, current = 12 ma @ 40 mhz, drive capability = 15 pf pa g e 2 of 3 standar d 07-ma r -2007 mhtml:file://y:\cp l\03062007\qtec\qt3.mht
pa g e 3 of 3 standar d 07-ma r -2007 mhtml:file://y:\cp l\03062007\qtec\qt3.mht
|