spec no: dsab5504 rev no: v.8 date: apr/13/2010 page: 1 of 6 approved: wynec checked: allen liu drawn: y.f.lv er p: 1101002048 t-1 3/4 (5mm) round led lamp part number: L-7143SGC super bright green features z outstanding material efficiency. z reliable and rugged. z low current capability. z rohs compliant. description the super bright green source color devices are made with gallium phosphide green light emitting diode. package dimensions notes: 1. all dimensions are in millimeters (inches). 2. tolerance is 0.25(0.01") unless otherwise noted. 3. lead spacing is measured where the leads emerge from the package. 4. the specifications, characteristics and technical data descri bed in the datasheet are subject to change without prior notice .
spec no: dsab5504 rev no: v.8 date: apr/13/2010 page: 2 of 6 approved: wynec checked: allen liu drawn: y.f.lv er p: 1101002048 selection guide notes: 1. 1/2 is the angle from optical centerline where the lumi nous intensity is 1/2 of the optical peak value. 2. luminous intensity/ luminous flux: +/-15%. absolute maximum ratings at ta=25c electrical / optical characteristics at ta=25c notes: 1.wavelength: +/-1nm. 2. forward voltage: +/-0.1v. notes: 1. 1/10 duty cycle, 0.1ms pulse width. 2. 2mm below package base. 3. 5mm below package base. part no. dice lens type v iewing angle [1] min. typ. 2 1/2 L-7143SGC super bright green (gap) water clear 70 150 30 iv (mcd) [2] @ 20ma symbol parameter device typ. max. units test conditions peak peak wavelength super bright green 565 nm i f =20ma d [1] dominant wavelength super bright green 568 nm i f =20ma ? 1/2 spectral line half-width super bright green 30 nm i f =20ma c capacitance super bright green 15 pf v f =0v;f=1mhz v f [2] forward voltage super bright green 2.2 2.5 v i f =20ma i r reverse current super bright green 10 ua v r = 5v parameter super bright green units power dissipation 62.5 mw dc forward current 25 ma peak forward current [1] 140 ma reverse voltage 5 v operating/storage temperature -40c to +85c lead solder temperature [2] 260c for 3 seconds lead solder temperature [3] 260c for 5 seconds
spec no: dsab5504 rev no: v.8 date: apr/13/2010 page: 3 of 6 approved: wynec checked: allen liu drawn: y.f.lv er p: 1101002048 super bright green L-7143SGC
spec no: dsab5504 rev no: v.8 date: apr/13/2010 page: 4 of 6 approved: wynec checked: allen liu drawn: y.f.lv er p: 1101002048 packing & label specifications L-7143SGC
spec no: dsab5504 rev no: v.8 date: apr/13/2010 page: 5 of 6 approved: wynec checked: allen liu drawn: y.f.lv er p: 1101002048
spec no: dsab5504 rev no: v.8 date: apr/13/2010 page: 6 of 6 approved: wynec checked: allen liu drawn: y.f.lv er p: 1101002048
|