asmt-lx60 flexible light strip module data sheet features ? outstanding abrasion resistance ? excellent mechanical properties ? excellent chemical resistance ? excellent light transitivity ? high shaping fexibility ? available length 100mm to 500mm at interval of 1mm ? available voltage source : 5v, 9v and 12v ? available color: blue, green, red and white ? light strip module in straight confguration applications ? handheld devices ? cellular phones ? decorative lighting ? electronics and electrical appliances description flexible light strip module is high performance light tube produced by avago technologies, integrating leds solution with excellent thermoplastic polyurethane. this light strip is an environmentally friendly green material, it ofers a unique combination of mechanical, physical, and chemical properties, including high tensile strength, excellent abrasion resistance, outstanding fexibility, weather resistance, non toxic, recyclable, and decomposable. flexible light strip module provides con - veniences for the designers to integrate light strip onto their devices with minimum consideration on optical and mechanical optimization. the specially designed housing helps to concentrate the light for maximum efciency and the specially designed pcb provides plug-and-play type of solution for assembly. the total solution provides the ease of design and assembly for designers.
2 package dimensions pin 1 vcc for led 1 pin 2 ground for led 1 pin vcc for led 2 pin 4 ground for led 2 pin 2 pin pin 1 pin 4 led1 r r led2 flexible light strip length = 200mm standard part number = asmt-lx60 notes: 1. all dimensions in millimeters (inches). 2. tolerances are 0.1mm [0.004 in.] unless otherwise specified. . strip diameter ?1.4mm. part numbering system for other available options asmt C l x 60 C xxx x b diameter b C ?1.4 (currently available option) v cc a C 5 v b C 9v c C 12v length 100mm to 500mm at interval of 1mm b C blue g C green r C red color w C white linear flexible light strip
absolute maximum ratings at t a = 25c note: 1. derate linearly as shown in figure 4. 2. for each individual led + resistor string. . vcc max = 12.1v. electrical characteristics at t a = 25c note: 1. for each individual led + resistor string. 2. resistor value is determined by forward voltage of led. recommended connector caution: asmt-lx60 devices are class 1 esd sensitive. please observe appropriate precautions during han - dling and processing. refer to avago technologies application note an-1142 for additional details. parameter asmt-lx60 unit dc forward current [1] [ 2] 0 ma power dissipation [2] [] 6 mw reverse voltage (i r = 100 a) [2] 5 v led junction temperature 110 c operating temperature range - 0 to 60 c storage temperature range - 0 to 60 c manual soldering temperature 50c for sec max part number voltage vcc (volts) [1] led forward current [1] i f (ma) @ vcc = 12.0v minimum typical maximum typical asmt-lx60 11.9 12.0 12.1 20 asmt-lx60 header pins customer motherboard
4 notes: 1. for individual led light source only. 2. the luminous intensity iv is measured at the peak of the spatial radiation pattern which may not be aligned with the mechanical axis of the led package. refer to iv bin table for binning structure and tolerance. . the dominant wavelength, d, is derived from the cie 19 1 chromaticity diagram and represents the perceived color of the device. refer to color bin limit tables for binning structure and tolerance. 4. the chromaticity coordinates are derived from the cie 19 1 chromaticity diagram and represent the perceived color of the device. refer to color bin limit tables for binning structure and tolerance. 5. measurement done at the center of the light stripe at straight position without bending. optical characteristics at t a = 25c part number luminous intensity, i v [1, 2] (mcd) @ 20ma peak wavelength, l peak [1] (nm) color, dominant wavelength l d [1, 3] (nm) luminous incidence [5] ev (lm/m2) min. max. typ. min. max. typ. asmt-lb60 71.5 180.0 468 465 475 0.0 asmt-lg60 180.0 450.0 520.0 515.0 55.0 10.0 asmt-lr60 112.5 285.0 67.0 615.0 60.0 0.0 part number luminous intensity, i v [1, 2] (mcd) @20ma typical chromaticity coordinates [1, 4] luminous incidence [5] ev (lm/m2) min. max. x y typ. asmt-lw60 1000 1600 0.1 0.1 20.0 light intensity (i v ) bin limits [1] [2] blue white red green bin id intensity (mcd) minimum maximum q 71.50 112.50 r 112.50 180.00 bin id intensity (mcd) minimum maximum w1 1000 1200 w2 1200 1400 w 1400 1600 bin id intensity (mcd) minimum maximum r 112.5 180.0 s 180.0 285.0 bin id intensity (mcd) minimum maximum s 180.0 285.0 t 285.0 450.0 notes: 1. bin categories are established for classifcation of products. products may not be available in all categories. please contact your avago technologies representative for information on current available bins. 2. for individual led light source only. tolerance: 15% tolerance: 15% tolerance: 15% tolerance: 15%
color bin limits [1] [2] blue tolerance: 1.0nm green tolerance: 1.0nm red tolerance: 1.0nm tolerance of each bin limit = 0.02 bin id dom. wavelength (nm) minimum maximum b 465.0 470.0 c 470.0 475.0 bin id dom. wavelength (nm) minimum maximum a 515.0 520.0 b 520.0 525.0 c 525.0 50.0 d 50.0 55.0 bin id dom. wavelength (mcd) minimum maximum - 615 60 rank chromaticity coordinates c11 x 0.290 0.297 0.297 0.290 y 0.06 0.16 0.28 0.274 c12 x 0.297 0.0 0.0 0.297 y 0.16 0.26 0.29 0.28 c1 x 0.0 0.10 0.10 0.0 y 0.26 0.6 0.0 0.29 c21 x 0.290 0.297 0.297 0.290 y 0.274 0.28 0.251 0.241 c22 x 0.297 0.0 0.0 0.297 y 0.28 0.29 0.261 0.251 c2 x 0.0 0.10 0.10 0.297 y 0.29 0.0 0.271 0.251 d11 x 0.10 0.20 0.20 0.10 y 0.6 0.50 0.18 0.0 d12 x 0.20 0.0 0.0 0.20 y 0.50 0.65 0. 0.18 d21 x 0.10 0.20 0.20 0.10 y 0.0 0.18 0.285 0.271 d22 x 0.20 0.0 0.0 0.20 y 0.18 0. 0.00 0.285 white notes: 1. bin categories are established for classifcation of products. products may not be available in all categories. please contact your avago technologies representative for information on current available bins. 2. for individual led light source only.
6 for product information and a complete list of distributors, please go to our web site: www.avagotech.com avago, avago technologies, and the a logo are trademarks of avago technologies, limited in the united states and other countries. data subject to change. copyright ? 2007 avago technologies limited. all rights reserved. obsoletes av01-0650en av02-0059en - january 17, 2007 handling caution 1. bending radius of the lightpipe shall always be larger than 10 times of the lightpipe diameter to avoid im - pact to its appearance and performance. figure 1. white binning in cie 1931 chromaticity diagram. figure 2. relative luminous intensity vs. forward current for led light sources only. figure 3. forward voltage vs. forward current for led light sources only. figure 4. maximum forward current vs. ambient temperature 0.20 0.22 0.24 0.26 0.28 0.0 0.2 0.4 0.6 0.8 0.28 0.0 0.2 0.4 x - coordinate y - coordinate c11 c12 c21 c22 c1 c2 d11 d21 d12 d22 0 0.2 0.4 0.6 0.8 1.0 1.2 1.4 1.6 0 5 10 15 20 25 0 5 dc forward current - ma relative luminous intensity (normalied at 20 ma blue white red green 0 5 10 15 20 25 0 5 0 1 2 4 forward voltage - v forward current - ma red green blue white
|
