spec no: dsad2330 rev no: v.4 date: nov/21/2005 page: 1 of 4 approved: j. lu checked: joe lee drawn: y.l.li erp:1301000819 package dimensions & internal circuit diagram notes: 1. all dimensions are in millimeters (inches), tolerance is 0 .25(0.01")unless otherwise noted. 2. specifications are subject to change without notice . p/n: sc23 - 11gwa green 57mm (2.3inch) single digit numeric displa y features 2.3 inch digit height. low current operation. excellent character appearance. high light output. easy mounting on p.c. boards or sockets. multicolor available. mechanically rugged. standard : gray face, white segment. rohs compliant. description the green source color devices are made with gallium phosphide green light emitting diode.
spec no: dsad2330 rev no: v.4 date: nov/21/2005 page: 2 of 4 approved: j. lu checked: joe lee drawn: y.l.li erp:1301000819 selection guid e part no. dice lens type iv (ucd) @ 10ma min. typ. sc23 - 11gwa green (gap) white diffused 4700 24000 common cathode.rt. hand decimal description electrical / optical characteristics at t a =25 c absolute maximum ratings at t a =25 c notes: 1. 1/10 duty cycle, 0.1ms pulse width. 2. 2mm below package base. symbol parameter device typ. max. test conditions units peak peak wavelength green 565 nm i f =20ma d dominant wavelength green 568 nm i f =20ma ? 1/2 spectral line half - width green 30 nm i f =20ma c capacitance green 15 pf v f =0v;f=1mhz v f forward voltage per segment or (dp) green 8.6 (4.4) 10 (5) v i f =20ma i r reverse current per segment or (dp) green 10 ua v r = 20v (v r = 10v) parameter green units power dissipation per segment or (dp) 250(125) mw dc forward current per segment or (dp) 25 ma peak forward current [1] per segment or (dp) 140 ma reverse voltage per segment or (dp) 20(10) v operating / storage temperature - 40c to +85c lead solder temperature [2] 260c for 5 seconds
spec no: dsad2330 rev no: v.4 date: nov/21/2005 page: 3 of 4 approved: j. lu checked: joe lee drawn: y.l.li erp:1301000819 green sc23 - 11gwa
spec no: dsad2330 rev no: v.4 date: nov/21/2005 page: 4 of 4 approved: j. lu checked: joe lee drawn: y.l.li erp:1301000819 packing & label specifications sc23 - 11gwa remarks: if special sorting is required (e.g. binning based on forward voltage, luminous intensity/ luminous flux, or wavelength), the typical accuracy of the sorting process is as follows: 1. wavelength: +/ - 1nm 2. luminous intensity/ luminous flux: +/ - 15% 3. forward voltage: +/ - 0.1v note: accuracy may depend on the sorting parameters.
|
