2 to 6 way rotary switch ratings up to 16a, 250v ac; 20a, 28v dc pairs of single pole change over contacts wide choice of switching circuits can be stacked together spindle a b c d m n p r s l supplied without spindle 9100 rotary switches 16a 250vac terminal c 6.3 x 0.8 h 4.8 x 0.8 for approval information on h terminals, contact the factory. simple circuits may not use all terminals. unnecessary terminals may be omitted. 9 2 switching positions 3 switching positions 4 switching positions 5 switching positions 6 switching positions 9100 switches offer almost infinite switching options for this reason it is impractical to show all the options available. the table below gives an example of a 5 position switching sequence: off, 1, 1+2, 1+2+3, 1+2+3+4 the code for your chosen circuit will be allocated by our technicians. please contact the factory for details. use the blank table to plan your switching up to 6 positions. 16(4)a 250vac t125 16a 400vac t125 8(8)a 250vac t125 5e4 (50,000 operations) ul csa 20a non ind 277vac, 250vac 2hp, 125vac 1hp ul85?, file no. e45221, csa file no. lr10990 30a 12v dc rohs compliant 9100 switches are highly versatile with up to 6 positions at 30 intervals and 6 terminals per switch. for more complex switching (7 positions & over), contact the factory. two switches may be stacked to give up to 12 terminal switching. 3mm contact gap. technical data on pages 4 & 5. series position circuit 9.2 9.2 1 a pos 1 off pos 2 pos 3 pos 4 pos 5 2 3 b 4 1 a pos 1 pos 2 pos 3 pos 4 pos 5 pos 6 2 3 b 4 in house test 26.0 ?.0 4.5 a/f 6.0 22.0 4.5 a/f 6.0 10.8 4.5 a/f 6.05 12.2 4.65 a/f 6.05 12.2 15 ? 4.65 a/f 6.0 20.0 4.5 a/f 6.0 23.0 4.5 a/f 6.0 12.2 for 2 gang switching 20.1 4.5 a/f 10.8 4.5 a/f 45 ? 6.0 rohs 64 c 9 5 01 d a stop at 120 ? order format terminal series positions circuit spindle body options code code code code code code arcolectric corporation 31-315 plantation drive, thousand palms, ca 92276 tel: 760-343-3650 fax: 760-343-3651 email: info@arcolectric.com
35.6 pos 1 spindle movement 360 0 in 30 0 intervals pos 2 18.5 12.4 34 b 32.3 32.0 9.2 9.2 7.0 28.0 6.3x0.8 tabs 2.5af hex hole 18.5 21 a 43 b 12 a 1 a pos 1 off pos 2 b pos 1 off pos 2 3 b pos 1 off pos 2 3 a 1 1 a pos 1 off pos 2 pos 3 2 1 a pos 1 off pos 2 pos 3 2 3 b 4 1 a pos 1 pos 3 2 off pos 2 off, 1 3 b 1 a pos 1 off pos 2 pos 3 pos 4 2 off,1,2,3 a pos 1 off pos 2 pos 3 2 3 b 4 3 b 4 1 a pos 1 pos 2 pos 3 pos 4 2 pos 1 off pos 2 pos 3 3 b 4 3 b 4 pos 1 off pos 2 pos 3 pos 4 1 a pos 1 off pos 2 pos 3 pos 4 2 3 b 1 a pos 1 off pos 2 pos 3 pos 4 2 b 4 1 a pos 1 off pos 2 pos 3 pos 4 2 4 b 1 a pos 1 off pos 2 pos 3 pos 4 b 3 3 b 4 1 a pos 1 off pos 2 pos 3 pos 4 off 3 b 4 1 a pos 1 pos 2 pos 3 pos 4 2 3 b 4 1 a pos 1 off pos 2 pos 3 pos 4 2 off, 2+3, 2+3+4 a standard 2 hole fixing recommended fixing 2 off no4 / 3.0mm self tapping screws 5.0mm min penetration into switch body. stacked switches for more complex switching a second switch may be stacked on the first. body dimensions (mm) options anti-rotation stops may be fitted at any of the index positions to limit the maximum angle of rotation. panel clearance a spacer can be fitted to the switch body to increase the clearance between the mounting panel and switch terminals. custom spindles custom spindles of any length, with or without a d flat, can be produced from our infinitely vari- able tooling. the flat can be at any angle. for all options call the factory. 28.0 14.0 2 holes o 3.2 / / o 8.5 off, 3 1, 2, 3, 4 off, 3, 3+4 off, 1+3 off,3,4,3+4 off, 1, 2+3, 1+3 off, 1, 1+2 1+3, off, 2+4 off, 4, 1+4, 1+2+4 1, off, 2 9201 1 a pos 1 off pos 2 2 off, 1+2 9202 9203 9204 9301 9304 9305 off,1,3,1+3 9407 9408 9409 9411 9414 9419 off, 1+2, 1+4, 1+2+3+4 off 4 b 1 a pos 1 pos 2 pos 3 pos 4 2 9421 off, 1+2, 1+4, 1+2+4 off 1 a pos 1 off pos 4 pos 2 pos 3 2 9422 off, 1, 2, off off, 1, 1+4, 1+2+4 off, 1+3, 1+4, 1+3+4 off, 1+4, 2+4, 3+4 9312 9313 9401 9403 1 a pos 1 off pos 2 pos 3 pos 4 2 3 b off, 1, 1+2, 1+2+3 9402 9404 9405 1 a pos 1 off pos 2 pos 3 pos 4 pos 5 2 3 b 4 off, 1, 1+2, 1+2+3, 1+2+3+4 1 a pos 1 off pos 2 pos 3 pos 4 pos 5 2 3 b 4 1 a pos 1 off pos 2 pos 3 pos 4 pos 5 2 3 b 4 1 a pos 1 off pos 2 pos 3 pos 4 pos 5 2 3 b off, 1, 2, 1+3, 1+3+4 off, 1+4, 1+3, 2+3, 1+2+3 off, 1, 1+2, 1+3, 1+2+3 9501 9503 9504 9505 1 a pos 1 off pos 2 pos 3 pos 4 pos 5 3 b 4 off, 4, 1+4, 3+4, 1+3+4 9509 note in the circuits on this page, the symbol shows the position of the switch cam, not the position of the spindle flat. 3 b 1 a pos 1 pos 2 pos 3 pos 4 2 off 9423 off, 3, 1+3, 1+2+3 65 arcolectric corporation 31-315 plantation drive, thousand palms, ca 92276 tel: 760-343-3650 fax: 760-343-3651 email: info@arcolectric.com
|
