g2 tm series 2-piece trunk and distribution connectors product information broadband products ? 2002 corning gilbert i nc. g-1400-594 03/02 connector specifications bandwidth: 5 mhz to 1 ghz operating range: -40f to +140f nominal impedance: 75 ohms shielding effectiveness: > 130 db return loss: > 30 db @ 1 g hz insertion loss: < 0.12 db (pin types) cable retention: exceeds cable manufacturers' maximum pulling tension specifications corning gilbert introduces the next generation in 2-piece connector technology, with patented design features that provide clear performance advantages over traditional two piece connectors. only the g2 series gives installers a full view of the cables center conductor insertion into the connector seizing mechanism, eliminating traditional blind entry installations. a unique center conductor seizing system prevents actuator lockup and preserves connector reusability. with the patented support sleeve located in the back nut of the connector, cable kinking typically associated with 2-piece connector installation.
? 2002 corning gilbert i nc. g-1400-594 03/02 p r odu c t f e a tu r es ? support sleeve located in main nut assembly reduces pull back during installation ? back nut radius allows smooth transition of heat s hrink tubing ? visible entry of center conductor into seizing mechanism (no blind entry) ? unique a c tu a tor closing mechanism preserves reusability ? flush insulator prevents moisture from collecting or migrating along the path ? non-rotational design for installation and disassembly m a terials and c onstru c tion of c onne c tor c ompone n ts : astm 6262 aluminum alloy with gold chromate conversion coating for excellent corrosion resistance and a dry film lubricant to prevent thread galling. contact pins and support sleeves are brass with bright acid tin plating providing excellent rf conductivity. o-rings are ultraviolet and ozone resistant epdm for maximum durability. 1 c onn e cto r ty pes : ch pin connector sp splice connector ext 3" extension connector ext-6 6" extension connector baff "f" female connector afm "f" male connector tr cable terminator pin length is standard 2.31 g2-500- ch -p3-t pin connector with a 2.31 pin f or .500 p3 / t10 cable 5/8-24 thd 2.31 [58.37 mm] .067 [1.7 mm] ? pin center conductor cutting guide .31 [7.9 mm] o r dering in f orm a tio n commscope p-3 times fiber t-10 part number .50 0 g2-500 - t y pe 1 -p3 - t .62 5 g2-625 - t y pe 1 -p3 - t .75 0 g2-750 - t y pe 1 -p3 - t .87 5 g2-875 - t y pe 1 -p3 - t commscope qr .54 0 g2-540 - t y pe 1 -q r - t .71 5 g2-715 - t y pe 1 -q r - t .86 0 g2-860 - t y pe 1 -q r - t times fiber tx part number .48 0 g2- 480 - t y pe 1 - t x - t .56 5 g2-565 - t y pe 1 - t x - t .70 0 g2-700 - t y pe 1 - t x - t trilogy mc 2 .50 0 g2-500 - t y pe 1 - mc 2 -t .65 0 g2-650 - t y pe 1 - mc 2 -t .75 0 g2-750 - t y pe 1 - mc 2 -t commscope p-1 .50 0 g2-500 - t y pe 1 - p1- t .75 0 g2-500 - t y pe 1 - p1 -t e xa mpl e p art n um ber : corning gilbert inc. broadband products 5310 w. camelback rd. glendale, az 85301 u.s.a. phone: 800 528 5567 (u.s. and canada) (01) 623 245 1050 (international) fax: 800 344 6358 623 931 0684 (01) 623 93 9 3538 website:www.corning.com/corninggilbert e-mail:info-gilbert@corning.com
|
