vicor corp. tel: 800-735-6200, 978-470-2900 fax: 978-475-6715 m-fiam9 rev. 2.0 page 1 of 7 set your site on vicor at vicorpower.com features ? emi filtering-mil-std-461e ? transient protection-mil-std-704a/e /f, mil-std-1275a/b/d ? environments-mil-std-810, mil-std- 202 ? environmental stress screening ? low profile mounting options ? output power up to 500 w ? output current up to 18 a ? mini sized package ? inrush current limiting product highlights the m-fiam9 is a dc front-end module that provides emi filtering and transient protection. the m-fiam9 enables designers using v icors maxi, mini, micro series 24 v & maxi series 28 v dc-dc converters to meet conducted emission / conducted susceptibility per mil-std-461e; and input transients per mil-std-704a/e/f and mil- std-1275a/b/d. the m-fiam9 accepts an input voltage of 10 C 36 vdc and delivers output power up to 500 w. m-fiam9 is housed in an industry standard "half brick" module measuring 2.28" x 2.2" x 0.5" and depending upon model selected, may be mounted onboard or inboard for height critical applications. compatible products ? maxi, mini, micro series 24 v input dc-dc converters ? maxi series 28 v input dc-dc converters the mva-fiam9 provides a coldplate and connector option for use with either 24 v input maxi, mini, micro series dc-dc converters or vipac arrays. shown actual size: 2.28 x 2.2 x 0.5 in 57,9 x 55,9 x 12,7 mm thermal resistance and capacity parameter min typ max unit b a sepl a te to sink fl a t, gre a sed s u rf a ce 0.16 c/w a tt with therm a l p a d (p/n 20264) 0.1 c/w a tt b a sepl a te to a m b ient free convection 7.9 c/w a tt 1000 lfm 2.2 c/w a tt m-fiam9 m 2 1 part numbering * product product grade temperatures (c) gr a de oper a ting stor a ge h = ?40 to +100 ? 55 to +125 m = ?55 to +100 ? 65 to +125 pin style 1 = short pin 2 = long pin s = short mod u m a te* n = long mod u m a te* f = short rohs g = long rohs baseplate 1 = slotted 2 =thre a ded 3 =thro u gh hole mtbf per mil-hdbk-217f (m-fiam9m21) temperature environment mtbf unit 25c gro u nd benign: g.b. 3,582 1,000 hrs 50c n a v a l sheltered: n.s. 644 1,000 hrs 65c air b orne inh ab ited c a rgo: a.i.c. 505 1,000 hrs data sheet m-fiam9 military cots 28 vin filter input attenuator module model number: m-fiam9m21* parameter rating unit notes +in to ?in 36 vdc contin u o u s 100 vdc see fig.1 mo u nting torq u e 5 (0.57) in-l b s6 e a ch, #4-40 or m3 pin soldering temper a t u re 500 (260) f(c) <5 sec; w a ve solder 750 (390) f(c) <7 sec; h a nd solder absolute maximum rating mva-fiam9: a coldplate and connector option. *comp a ti b le with s u rfm a te a nd inm a te socketing system. mva-fiam9 (coldplate and connector option) h-gr a de (-40c to +100c oper a tion): mva-fiam9h, mva-fiam9h-c (on / off control en ab led) m-gr a de (-55c to +100c oper a tion): mva-fiam9m, mva-fiam9m-c (on / off control en ab led)
vicor corp. tel: 800-735-6200, 978-470-2900 fax: 978-475-6715 m-fiam9 rev. 2.0 page 2 of 7 set your site on vicor at vicorpower.com parameter min typ max unit notes inp u t volt a ge 10 28 36 vdc contin u o u s inr u sh limiting 0.007 a/f tr a nsient imm u nity 100 vdc 50 ms per mil-std-1275a/b/d, contin u o u s oper a tion 250 vdc 70 s per mil-std-1275a/b/d, contin u o u s oper a tion 70 vdc 20 ms per mil-std-704a, contin u o u s oper a tion 50 vdc 12.5 ms per mil-std-704e/f, contin u o u s oper a tion input specifications parameter min typ max unit notes o u tp u t power 500 w o u tp u t c u rrent 18 a efficiency 96 97 % intern a l volt a ge drop 0.85 1.5 v 500 w, 25c ba sepl a te extern a l c a p a cit a nce see fig u re 4 on p a ge 4 330 1000 f 50 v output specifications parameter min typ max unit notes on/off control en ab le (on) 0.0 1.0 vdc referenced to ? vo u t dis ab le (off) 3.5 5.0 vdc 100 k intern a l p u ll u p resistor control pin specifications parameter min typ max unit notes dielectric withst a nd 1,500 vrms inp u t/o u tp u t to b a se 2,121 vdc inp u t/o u tp u t to b a se safety specifications specifications (typical at t bp = 25c, nominal line and 75% load, unless otherwise specified) standard test procedure notes mil-std-461e cond u cted emissions: ce101, ce102 cond u cted s u scepti b ility: cs101, cs114, cs115, cs116 emi parameter min typ max unit notes weight 3.3 (94) o u nces (gr a ms) w a rr a nty 2 ye a rs general specifications
vicor corp. tel: 800-735-6200, 978-470-2900 fax: 978-475-6715 m-fiam9 rev. 2.0 page 3 of 7 set your site on vicor at vicorpower.com specifications (cont.) environmental qualification altitude mil-std-810f, method 500.4, proced u re i & ii, 40,000 ft. a nd 70,000 ft. oper a tion a l. explosive atmosphere mil-std-810f, method 511.4, proced u re i, oper a tion a l. vibration mil-std-810f, method 514.5, proced u re i, c a tegory 14, sine a nd r a ndom vi b r a tion per t ab le 514.5c for helicopter ah-6j m a in rotor with over a ll level of 5.6 g rms for 4 ho u rs per a xis. mil-std-810f, method 514.5c, gener a l minim u m integrity c u rve per fig u re 514.5c-17 with over a ll level of 7.7 g rms for 1 ho u r per a xis. shock mil-std-810f, method 516.5, proced u re i, f u nction a l shock, 40 g. mil-s- 901d, lightweight h a mmer shock, 3 imp a cts / a xis, 1,3,5 ft. mil-std-202f, method 213b, 60 g, 9 ms h a lf sine. mil-std-202f, method 213b, 75 g, 11ms s a w tooth shock. acceleration mil-std-810f, method 513.5, proced u re ii, t ab le 513.5-ii, oper a tion a l, 2-7 g, 6 directions. humidity mil-std-810f, method 507.4. solder test mil-std-202g, method 208h, 8 ho u r a ging. parameter h-grade m-grade oper a ting temper a t u re -40c to +100c -55c to +100c stor a ge temper a t u re -55c to +125c -65c to +125c temper a t u re cycling* 12 cycles 12 cycles -65c to +100c -65c to +100c am b ient test @ 25c yes yes power cycling bu rn-in 12 ho u rs, 29 cycles 24 ho u rs, 58 cycles f u nction a l a nd p a r a metric ate tests -40c a nd +100c -55c a nd +100c hi-pot test yes yes vis ua l inspection yes yes test d a t a vicorpower.com vicorpower.com environmental stress screening *temper a t u re cycled with power off, 17c per min u te r a te of ch a nge.
vicor corp. tel: 800-735-6200, 978-470-2900 fax: 978-475-6715 m-fiam9 rev. 2.0 page 4 of 7 set your site on vicor at vicorpower.com figure 2 conducted noise; m-fiam9 and model v28a12m200b dc-dc converter operating at 28 vdc, 200 w. figure 1 transient immunity: m-fiam9 output response to an input transient. figure 4 transient, surge protection and recommended reverse polarity protection. 0 200 400 600 8 00 1000 1200 1400 1600 1 8 00 2000 40 50 60 70 8 0 90 100 vin (v) time (ms) figure 3 shut down time of m-fiam9 vs. overvoltage note: the m-fiam 9 is shown in the on state. to disable, open the connection between on/off and ?ut. +s +out sc ? ?ut ?n pr pc +in ?n emi gnd nc +in +out nc nc on off ?ut m-fiam9 maxi, mini, micr o 24 vdc input or maxi 28 v dc-dc conver dc input te r transorb p/n 19180-510 0.2 f c1 4,700 pf 4,700 pf 0.01 f 0.01 f f1 input component suggestions recommended fuse: (f1) 20 a (max), bussmann abc style capacitance: (c1) 330 ? (min), 1000 ? (max)
vicor corp. tel: 800-735-6200, 978-470-2900 fax: 978-475-6715 m-fiam9 rev. 2.0 page 5 of 7 set your site on vicor at vicorpower.com 0.195 4,95 1.400* 35,56 1.000* 25,40 0.700* 17,78 0.400* 10,16 1.790** 45,47 0.06 1,5 r (4x) 0.158 4,01 5 6 7 8 9 12 34 0.003 0,08 * denotes tol = pcb thickness 0.062 0.010 1,57 0,25 short pin style 0.094 0.003 2,39 0,08 inboard solder mount 0.43 10,9 0.53 13,5 1.900* 48.26 1.900* 48,26 1.575** 40,00 0.164 0.003 4,16 0,08 long pin style 0.094 0.003 2,39 0,08 onboard solder mount 0.164 0.003 4,16 0,08 plated through hole dia (7x) (2x) ** pcb window all markings this surface pins styles solder:tin / lead hot solder dipped modumate: gold plated copper rohs: gold plated copper aluminum baseplate module pins no. function label 1+in + 2 no nc connection 3 gro u nd emi/gnd 4?in ? 5?o u t? 6 on/off on/off 7 no nc connection 8 no nc connection 9+o u t+ mechanical drawings figure 5 mechanical diagram figure 6 pcb mounting specifications.
vicor corp. tel: 800-735-6200, 978-470-2900 fax: 978-475-6715 m-fiam9 rev. 2.0 page 6 of 7 set your site on vicor at vicorpower.com inches mm 20,6 0.81 39,1 1.54 26,4 1.04 7,8 0.31 input connector mva ? fiam9 output connector 119,4 4.7 figure 7 mva-fiam9 pakaging option output connector pin # function pin # function 1 +vo u t 10 +vo u t 2 +vo u t 11 +vo u t 3 +vo u t 12 +vo u t 4 n/c 13 nc 5 n/c 14 nc 6 n/c 15 on / off 7?vo u t16 ?vo u t 8?vo u t17 ?vo u t 9?vo u t18 ?vo u t output mounting vicor p/n connector ho u sing 25050 pin 24796 kit 25067 input connector pin # function 1 ? 4 ?vin 5 ? 7 +vin 8nc 9 pe protective e a rth 10 pe protective e a rth 11 ? 13 ?vin 14 ? 17 +vin 18 nc 19 pe protective e a rth 20 pe protective e a rth input mounting vicor p/n connector ho u sing 24795 pin 24796 kit 24828 1 10 9 18 1 11 10 20 note : the mva-fiam9h a nd mva-fiam9m a re delivered with the on / off control a lre a dy config u red a s on u sing a 0 ohm resistor on the u nderside of the o u tp u t connector b o a rd. the mva-fiam9h-c a nd mva-fiam9m-c a re delivered witho u t the 0 ohm resistor inst a lled, a llowing for u ser control of the on / off f u nction a lity .
vicor corp. tel: 800-735-6200, 978-470-2900 fax: 978-475-6715 m-fiam9 rev. 2.0 5/09 set your site on vicor at vicorpower.com vicor corporation 25 frontage road andover, ma, usa 01810 tel: 800-735-6200 fax: 978-475-6715 email customer service: custserv@vicorpower.com technical support: apps@vicorpower.com vicors comprehensive line of power solutions includes high density ac-dc and dc-dc modules and accessory components, fully configurable ac-dc and dc-dc power supplies, and complete custom power systems. information furnished by vicor is believed to be accurate and reliable. however, no responsibility is assumed by vicor for its use. vicor components are not designed to be used in applications, such as life support systems, wherein a failure or malfunction could result in injury or death. all sales are subject to vicors terms and conditions of sale, which are available upon request. specifications are subject to change without notice. intellectual property notice vicor and its subsidiaries own intellectual property (including issued u.s. and foreign patents and pending patent applications) relating to the products described in this data sheet. interested parties should contact vicor's intellectual property department. warranty vicor products are guaranteed for two years from date of shipment against defects in material or workmanship when in normal use and service. this warranty does not extend to products subjected to misuse, accident, or improper application or maintenance. vicor shall not be liable for collateral or consequential damage. this warranty is extended to the original purchaser only. except for the foregoing express warranty, vicor makes no warranty, express or implied, including, but not l imited to, the warranty of merchantability or fitness for a particular purpose. vicor will repair or replace defective products in accordance with its own best judgement. for service under this warranty, the buyer must contact vicor to obtain a return material authorization (rma) number and shipping instructions. products returned without prior authorization will be returned to the buyer. the buyer will pay all charges incurred in returning the product to the factory. vicor will pay all reshipment charges if the product was defective within the terms of this warranty. information published by vicor has been carefully checked and is believed to be accurate; however, no responsibility is assumed for inaccuracies. vicor reserves the right to make changes to any products without further notice to improve reliabilit y, function, or design. vicor does not assume any liability arising out of the application or use of any product or circuit; neith er does it convey any license under its patent rights nor the rights of others. vicor general policy does not recommend the use of its components in life support applications wherein a failure or malfunction may directly threaten life or injury. per vicor terms and conditions of sale, the user of vicor components in life support applications assumes all risks of such use and indemnifies vicor against all damages.
|
