amplifier, power, 14w 1.3-2.5 ghz m/a-com inc. and its aff iliates reserve the right to make c hanges to the product(s) or information contained herein without notice. m/a-com makes no warranty, representation or guarantee regarding the suitab ility of its products for any particular purpose, nor does m/a-com assume any liab ility whatsoever arising out of the use or application of any product(s) or information. ? north america tel: 800.366.2266 / fax: 978.366.2266 ? europe tel: 44.1908.574.200 / fax: 44.1908.574.300 ? asia/pacific tel: 81.44.844.8296 / fax: 81.44.844.8298 visit www.macom.c om for additional data sheets and produc t inf or mation. rev a preliminary datasheet 1 MAAP-000076-PKG001 rohs compliant 1. t c = case temperature 2. adjust v gg between ?2.6 and ?1.2v to achieve specified i dq . electrical characteristics: t c = 45c 1 , z 0 = 50 , v dd = 10v, i dq = 3.8a 2 , p in = 22 dbm, r g = 30 description die on pedestal ceramic pkg sample board die sample board part number maap- 000076-ped000 m aap- 000076-smb001 m aap- 000076-smb004 mechanical sample maap- 000076-mch000 also available in: features ? 14 watt saturated output power level ? variable drain voltage (6-10v) operation ? msag process primary applications ? radio communications ? satcom description the maap- 000076-pkg001 is a 2-stage 14w power amplifier with on-chip bias networks in a 10 lead flange-mount ceramic package, allowing easy assembly. the package is hermetic and provides an excellent thermal path. this product is fully matched to 50 ohms on both the input and output. external dc blocking capacitors are not required since they are incorporated into the mmic design. it can be used as a power amplifier stage or as a driver stage in hig h power applications. fabricated using m/a-com?s repeatable, high performance and highly reliable gaas multifunction self-aligned gate (msag?) process, each device is 100% rf tested on wafer to ensure performance compliance. pin # description 1 vgg 2n/c 3rf in 4n/c 5 vgg 6 vdd 7n/c 8 rf out 9n/c 10 vdd parameter symbol typical units bandwidth f 1.3-2.5 ghz output power p out 41.5 dbm 1-db compression point p1db 41 dbm small signal gain g 25 db power added efficiency pae 29 % input vswr vswr 1.7:1 output vswr vswr 1.8:1 gate current, under large signal rf drive i gg <25 ma drain current, under large signal rf drive i dd <5.9 a output third order intercept ip 3 46 dbm output third order intermod, pout = 28 dbm (scl) im3 38 dbc
amplifier, power, 14w 1.3-2.5 ghz m/a-com inc. and its aff iliates reserve the right to make c hanges to the product(s) or information contained herein without notice. m/a-com makes no warranty, representation or guarantee regarding the suitab ility of its products for any particular purpose, nor does m/a-com assume any liab ility whatsoever arising out of the use or application of any product(s) or information. ? north america tel: 800.366.2266 / fax: 978.366.2266 ? europe tel: 44.1908.574.200 / fax: 44.1908.574.300 ? asia/pacific tel: 81.44.844.8296 / fax: 81.44.844.8298 visit www.macom.c om for additional data sheets and produc t inf or mation. rev a preliminary datasheet 2 MAAP-000076-PKG001 rohs compliant maximum ratings 3 operating instructions this device is static sensitive. please handle with care. to operate the device, follow these steps. 1. apply v gg = -2.7 v, v dd = 0 v. 2. ramp v dd to desired voltage, typically 10.0 v. 3. adjust v gg to set i dq , (approximately @ ?2.0 v). 4. set rf input. 5. power down sequence in reverse. turn v gg off last. characteristic symbol min typ max unit drain voltage v dd 6.0 10 10 v gate voltage v gg -2.6 -2.0 -1.2 v input power p in 22 25 dbm thermal resistance jc 2.2 c/w case temperature t c note 5 c recommended operating conditions 4 parameter symbol absolute maximum units input power p in 27 dbm drain supply voltage v dd +12.0 v gate supply voltage v gg -3.0 v quiescent drain current (no rf) i dq 6.1 a junction temperature t j 170 c storage temperature t stg -55 to +150 c quiescent dc power dissipated (no rf) p diss 61.0 w 3. operation beyond these limits may result in permanent damage to the part. 4. operation outside of these ranges may reduce product reliability. 5. case temperature = 170c ? jc * v dd * i dq power derating curve, quiescent (no rf) 0 10 20 30 40 50 60 70 80 -40-200 20406080100120140160180 maximum al lowable base temperature (c) peak power dissipation (watts)
amplifier, power, 14w 1.3-2.5 ghz m/a-com inc. and its aff iliates reserve the right to make c hanges to the product(s) or information contained herein without notice. m/a-com makes no warranty, representation or guarantee regarding the suitab ility of its products for any particular purpose, nor does m/a-com assume any liab ility whatsoever arising out of the use or application of any product(s) or information. ? north america tel: 800.366.2266 / fax: 978.366.2266 ? europe tel: 44.1908.574.200 / fax: 44.1908.574.300 ? asia/pacific tel: 81.44.844.8296 / fax: 81.44.844.8298 visit www.macom.c om for additional data sheets and produc t inf or mation. rev a preliminary datasheet 3 MAAP-000076-PKG001 rohs compliant figure 3. saturated output power vs. frequency and quiescent bias condition (vdd / idq) 20 22 24 26 28 30 32 34 36 38 40 42 44 46 48 50 1.0 1.2 1.4 1.6 1.8 2.0 2.2 2.4 2.6 2.8 3.0 frequency (ghz) output power (dbm) 6v / 6.10a 8v / 4.75a 10v / 3.80a figure 1. p1db vs. frequency and quiescent bias condition (vdd / idq) 20 22 24 26 28 30 32 34 36 38 40 42 44 46 48 50 1.0 1.2 1.4 1.6 1.8 2.0 2.2 2.4 2.6 2.8 3.0 frequency (ghz) p1db (dbm) 6v / 6.10a 8v / 4.75a 10v / 3.80a figure 4. saturated power added efficiency vs. frequency and quiescent bias c ondition (vdd / idq) 0 5 10 15 20 25 30 35 40 1.0 1.2 1.4 1.6 1.8 2.0 2.2 2.4 2.6 2.8 3.0 frequency (ghz) pae (%) 6v / 6.10a 8v / 4.75a 10v / 3.80a figure 6. small signal gain & saturated output power, power added efficiency and drain current vs. case temperature at 2.0 ghz, vd = 10v, and idq = 3.80a 0 5 10 15 20 25 30 35 40 45 50 35 45 55 65 75 85 case temperature (oc) ssg (db), pout (dbm), pae (%) 3.0 3.4 3.8 4.2 4.6 5.0 5.4 5.8 6.2 6.6 7.0 ids (a) ssg pout pae ids figure 5. saturated output power vs. frequency and case temperature at vd = 10v and idq = 3.80a 20 22 24 26 28 30 32 34 36 38 40 42 44 46 48 50 1.0 1.2 1.4 1.6 1.8 2.0 2.2 2.4 2.6 2.8 3.0 frequency (ghz) output power (dbm) 35oc 85oc figure 2. small signal gain and input & output vswr vs. frequency and quiescent bias (vdd / idq) 10 15 20 25 30 35 1.0 1.2 1.4 1.6 1.8 2.0 2.2 2.4 2.6 2.8 3.0 frequency (ghz) gain (db) 1 2 3 4 5 6 vswr 6v / 6.10a 8v / 4.75a 10v / 3.80a small signal gain out p ut vsw r in put v s wr
amplifier, power, 14w 1.3-2.5 ghz m/a-com inc. and its aff iliates reserve the right to make c hanges to the product(s) or information contained herein without notice. m/a-com makes no warranty, representation or guarantee regarding the suitab ility of its products for any particular purpose, nor does m/a-com assume any liab ility whatsoever arising out of the use or application of any product(s) or information. ? north america tel: 800.366.2266 / fax: 978.366.2266 ? europe tel: 44.1908.574.200 / fax: 44.1908.574.300 ? asia/pacific tel: 81.44.844.8296 / fax: 81.44.844.8298 visit www.macom.c om for additional data sheets and produc t inf or mation. rev a preliminary datasheet 4 MAAP-000076-PKG001 rohs compliant fi gure 12. gain vs. output power and frequency at vd = 10v and idq = 3.80a 10 12 14 16 18 20 22 24 26 28 30 16 18 20 22 24 26 28 30 32 34 36 38 40 42 44 output power (dbm) gain (db) 1.25 ghz 1.75 ghz 2.00 ghz 2.50 ghz figure 11. output power vs. input power and frequency at vd = 10v and idq = 3.80a 16 18 20 22 24 26 28 30 32 34 36 38 40 42 44 -6 -4 -2 0 2 4 6 8 10121416182022242628 input power (dbm) output power (dbm) 1.25 ghz 1.75 ghz 2.00 ghz 2.50 ghz fi gure 10. gain vs. output power and frequency at vd = 8v and i dq = 4.75a 10 12 14 16 18 20 22 24 26 28 30 16 18 20 22 24 26 28 30 32 34 36 38 40 42 44 output power (dbm) gain (db) 1. 25 ghz 1. 75 ghz 2. 00 ghz 2. 50 ghz figure 9. output power vs. input power and frequency at vd = 8v and idq = 4.75a 16 18 20 22 24 26 28 30 32 34 36 38 40 42 44 -6 -4 -2 0 2 4 6 8 10121416182022242628 input power (dbm) output power (dbm) 1.25 ghz 1.75 ghz 2.00 ghz 2.50 ghz figure 8. gain vs. output power and frequency at vd = 6v and idq = 6.10a 10 12 14 16 18 20 22 24 26 28 30 16 18 20 22 24 26 28 30 32 34 36 38 40 42 44 output power (dbm) gain (db) 1.25 ghz 1.75 ghz 2.00 ghz 2.50 ghz figure 7. output power vs. input power and frequency at vd = 6v and idq = 6.10a 16 18 20 22 24 26 28 30 32 34 36 38 40 42 44 -6-4-202468101214161820222426 input power (dbm) output power (dbm) 1.25 ghz 1.75 ghz 2.00 ghz 2.50 ghz vd = 8v vd = 10v vd = 6v
amplifier, power, 14w 1.3-2.5 ghz m/a-com inc. and its aff iliates reserve the right to make c hanges to the product(s) or information contained herein without notice. m/a-com makes no warranty, representation or guarantee regarding the suitab ility of its products for any particular purpose, nor does m/a-com assume any liab ility whatsoever arising out of the use or application of any product(s) or information. ? north america tel: 800.366.2266 / fax: 978.366.2266 ? europe tel: 44.1908.574.200 / fax: 44.1908.574.300 ? asia/pacific tel: 81.44.844.8296 / fax: 81.44.844.8298 visit www.macom.c om for additional data sheets and produc t inf or mation. rev a preliminary datasheet 5 MAAP-000076-PKG001 rohs compliant figure 18. drain current vs. input power and frequency at vd = 10v and idq = 3.80a 2.0 2.5 3.0 3.5 4.0 4.5 5.0 5.5 6.0 6.5 7.0 -6-4-20246810121416182022242628 input power (dbm) ids (a) 1.25 ghz 1.75 ghz 2.00 ghz 2.50 ghz figure 17. power added efficiency vs. input power and frequency at vd = 10v and idq = 3.80a 0 5 10 15 20 25 30 35 -6 -4 -2 0 2 4 6 8 10121416182022242628 input power (dbm) pae (%) 1. 25 ghz 1. 75 ghz 2. 00 ghz 2. 50 ghz figure 16. drain current vs. input power and frequency at vd = 8v and idq = 4.75a 2.0 2.5 3.0 3.5 4.0 4.5 5.0 5.5 6.0 6.5 7.0 -6-4-20246810121416182022242628 input power (dbm) ids (a) 1.25 ghz 1.75 ghz 2.00 ghz 2.50 ghz figure 15. power added efficiency vs. input power and frequency at vd = 8v and idq = 4.75a 0 5 10 15 20 25 30 35 -6 -4 -2 0 2 4 6 8 10121416182022242628 input power (dbm) pae (%) 1. 25 ghz 1. 75 ghz 2. 00 ghz 2. 50 ghz figure 14. drain current vs. input power and frequency at vd = 6v and idq = 6.10a 2.0 2.5 3.0 3.5 4.0 4.5 5.0 5.5 6.0 6.5 7.0 -6-4-202468101214161820222426 input power (dbm) ids (a) 1. 25 ghz 1. 75 ghz 2. 00 ghz 2. 50 ghz figure 13. power added efficiency vs. input power and frequency at vd = 6v and idq = 6.10a 0 5 10 15 20 25 30 35 -6-4-202468101214161820222426 input power (dbm) pae (%) 1.25 ghz 1.75 ghz 2.00 ghz 2.50 ghz vd = 8v vd = 10v vd = 6v
amplifier, power, 14w 1.3-2.5 ghz m/a-com inc. and its aff iliates reserve the right to make c hanges to the product(s) or information contained herein without notice. m/a-com makes no warranty, representation or guarantee regarding the suitab ility of its products for any particular purpose, nor does m/a-com assume any liab ility whatsoever arising out of the use or application of any product(s) or information. ? north america tel: 800.366.2266 / fax: 978.366.2266 ? europe tel: 44.1908.574.200 / fax: 44.1908.574.300 ? asia/pacific tel: 81.44.844.8296 / fax: 81.44.844.8298 visit www.macom.c om for additional data sheets and produc t inf or mation. rev a preliminary datasheet 6 MAAP-000076-PKG001 rohs compliant figure 24. third order intermod vs. output power and frequency at vd = 10v and idq = 3.80a 0 10 20 30 40 50 60 70 80 90 100 12 14 16 18 20 22 24 26 28 30 32 34 36 38 fundamental output power - single carrier (dbm) im3 (dbc) 1.3 ghz 2.0 ghz 2.5 ghz figure 23. third order intercept vs. output power and frequency at vd = 10v and idq = 3.80a 30 35 40 45 50 55 60 12 14 16 18 20 22 24 26 28 30 32 34 36 38 fundamental output power - single carrier (dbm) ip3 (dbm) 1.3 ghz 2.0 ghz 2.5 ghz figure 22. third order intermod vs. output power and frequency at vd = 8v and i dq = 4.75a 0 10 20 30 40 50 60 70 80 90 100 12 14 16 18 20 22 24 26 28 30 32 34 36 38 fundamental output power - single carrier (dbm) im3 (dbc) 1.3 ghz 2.0 ghz 2.5 ghz figure 21. third order intercept vs. output power and frequency at vd = 8v and idq = 4.75a 30 35 40 45 50 55 60 12 14 16 18 20 22 24 26 28 30 32 34 36 38 fundamental output power - single carrier (dbm) ip3 (dbm) 1.3 ghz 2.0 ghz 2.5 ghz figure 20. third order intermod vs. output power and frequency at vd = 6v and i dq = 6.10a 0 10 20 30 40 50 60 70 80 90 100 12 14 16 18 20 22 24 26 28 30 32 34 36 38 fundamental output power - single carrier (dbm) im3 (dbc) 1.3 ghz 2.0 ghz 2.5 ghz figure 19. third order intercept vs. output power and frequency at vd = 6v and idq = 6.10a 30 35 40 45 50 55 60 12 14 16 18 20 22 24 26 28 30 32 34 36 38 fundamental output power - single carrier (dbm) ip3 (dbm) 1.3 ghz 2.0 ghz 2.5 ghz vd = 8v vd = 10v vd = 6v
amplifier, power, 14w 1.3-2.5 ghz m/a-com inc. and its aff iliates reserve the right to make c hanges to the product(s) or information contained herein without notice. m/a-com makes no warranty, representation or guarantee regarding the suitab ility of its products for any particular purpose, nor does m/a-com assume any liab ility whatsoever arising out of the use or application of any product(s) or information. ? north america tel: 800.366.2266 / fax: 978.366.2266 ? europe tel: 44.1908.574.200 / fax: 44.1908.574.300 ? asia/pacific tel: 81.44.844.8296 / fax: 81.44.844.8298 visit www.macom.c om for additional data sheets and produc t inf or mation. rev a preliminary datasheet 7 MAAP-000076-PKG001 rohs compliant figure 26. third order intermod vs. case temperature and frequency at single carrier output power level = 28dbm, vd = 10v and idq = 3.20a 20 24 28 32 36 40 44 48 52 56 60 30 40 50 60 70 80 case temperature (oc) im3 (dbc) 7. 50 ghz 9. 00 ghz 10.50 ghz figure 25. third order intercept vs. case temperature and frequency at single carrier output power level = 28dbm, vd = 10v and idq = 3.20a 20 24 28 32 36 40 44 48 52 56 60 30 40 50 60 70 80 case temperature (oc) ip3 (dbm) 7.50 ghz 9.00 ghz 10.50 ghz
amplifier, power, 14w 1.3-2.5 ghz m/a-com inc. and its aff iliates reserve the right to make c hanges to the product(s) or information contained herein without notice. m/a-com makes no warranty, representation or guarantee regarding the suitab ility of its products for any particular purpose, nor does m/a-com assume any liab ility whatsoever arising out of the use or application of any product(s) or information. ? north america tel: 800.366.2266 / fax: 978.366.2266 ? europe tel: 44.1908.574.200 / fax: 44.1908.574.300 ? asia/pacific tel: 81.44.844.8296 / fax: 81.44.844.8298 visit www.macom.c om for additional data sheets and produc t inf or mation. rev a preliminary datasheet 8 MAAP-000076-PKG001 rohs compliant figure 27. package dimensions this is a high frequency, low thermal resistance package. the package consists of a cofired ceramic construction with a copper-tungsten base and iron-nickel-cobalt leads. the finish consists of electrolytic gold over nickel plate. maap-000076
amplifier, power, 14w 1.3-2.5 ghz m/a-com inc. and its aff iliates reserve the right to make c hanges to the product(s) or information contained herein without notice. m/a-com makes no warranty, representation or guarantee regarding the suitab ility of its products for any particular purpose, nor does m/a-com assume any liab ility whatsoever arising out of the use or application of any product(s) or information. ? north america tel: 800.366.2266 / fax: 978.366.2266 ? europe tel: 44.1908.574.200 / fax: 44.1908.574.300 ? asia/pacific tel: 81.44.844.8296 / fax: 81.44.844.8298 visit www.macom.c om for additional data sheets and produc t inf or mation. rev a preliminary datasheet 9 MAAP-000076-PKG001 rohs compliant figure 28. recommended bias configuration assembly instructions: this flange mount style package provides a robust interface between a highly integrated gaas mmic device and a circuit board which may be assembled using conventional surface mount techniques. a thin shim made of a thermally and electrically conductive, ductile material must be used prior to installation of the ceramic package for proper thermal and electrical performance. refer to m/a-com application note #m567* for more information regarding shim material and mounting screw torque requirements. for applications where surface mount components are to be installed after the ceramic package installation, this package will not be damaged when subjected to typical convection or ir oven reflow profiles. refer to m/a-com application note #m538* for maximum allowable reflow time and temperature. alternatively, the package leads may be individually soldered. whether an iron or hot gas soldering equipment is used, care should be taken to insure that the temperature is well controlled and electric static discharge (esd) safe. * application notes are available upon request. biasing notes: ? a negative bias must be applied to v gg before applying a positive bias to v dd to prevent damage to the amplifier. maap-000076 0.1 to 1.0 f v dd n/c rf in n/c n/c rf out n/c 0.1 to 1.0 f v gg vd d vd d vgg vgg r g
amplifier, power, 14w 1.3-2.5 ghz m/a-com inc. and its aff iliates reserve the right to make c hanges to the product(s) or information contained herein without notice. m/a-com makes no warranty, representation or guarantee regarding the suitab ility of its products for any particular purpose, nor does m/a-com assume any liab ility whatsoever arising out of the use or application of any product(s) or information. ? north america tel: 800.366.2266 / fax: 978.366.2266 ? europe tel: 44.1908.574.200 / fax: 44.1908.574.300 ? asia/pacific tel: 81.44.844.8296 / fax: 81.44.844.8298 visit www.macom.c om for additional data sheets and produc t inf or mation. rev a preliminary datasheet 10 MAAP-000076-PKG001 rohs compliant figure 29. MAAP-000076-PKG001 evaluation board * additional bypassing may be required if wires are longer than 12?. vdd gnd (twisted pair) vgg gnd (twisted pair) r g
|
