|
If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
Datasheet File OCR Text: |
panasonic corporation automation controls business division industrial.panasonic.com/ac/e/ ayf33 acctb47e 201303-t ordering information for fpc y3b/y3bw series fpc connectors (0.3mm pitch) back lock y3bw is added. features 1. slim and low pro?e design (pitch: 0.3 mm) back lock type and the slim body with a 3.15 mm depth (with the lever). 2. mechanical design freedom is achieved with double top and bottom contacts top and bottom double contacts eliminate the need of using different connectors (with either top or bottom contacts) depending on the fpc wiring conditions. 3. easy-to-handle back lock structure 4. man-hours of assembly time can be reduced by delivering the connectors with their levers opened. 5. wiring patterns can be placed underneath the connector. 6. ni barrier with high resistance to solder creepage 7. y3bw features advanced functionality, including a structure to temporarily hold the fpc and a higher holding force. the fpc holding contacts located on both ends of the connector facilitate positioning of fpc and further enhance the fpc holding force. (1) the inserted fpc can be temporarily held until the lever is closed. (2) when the lever is closed, the holding contacts lock the fpc by its notches, enhancing the fpc holding force. applications mobile devices, such as cellular phones, smartphones, digital still cameras and digital video cameras. y3b y3bw rohs compliant unit: mm 0.9 3.15 structure to lock notches on both ends of the fpc with holding contacts applicable fpc shapes new 33: fpc connector 0.3 mm pitch (back lock) ayf 3 3 5 number of pins (2 digits) contact direction 3: top and bottom double contacts (y3b) 6: top and bottom double contacts, lock holding type (y3bw) surface treatment (contact portion / terminal portion) 5: au plating/au plating (ni barrier)
panasonic corporation automation controls business division industrial.panasonic.com/ac/e/ ayf33 acctb47e 201303-t product types y3b y3bw notes: 1. order unit; for volume production: 1-inner carton (1-reel) units. samples for mounting check: 50-connector units. please contact our sales of?e. samples: small lot orders are possible. please contact our sales of?e. 2. please contact our sales of?e for connectors having a number of pins other than those listed above. specifications 1. characteristics height number of pins pa rt number pac king inner carton outer carton 0.9 mm 7a yf330735 5,000 pieces 10,000 pieces 8 ayf330835 9a yf330935 11 ayf331135 13 ayf331335 15 ayf331535 17 AYF331735 21 ayf332135 23 ayf332335 25 ayf332535 27 ayf332735 31 ayf333135 33 ayf333335 35 ayf333535 37 ayf333735 39 ayf333935 45 ayf334535 51 ayf335135 61 ayf336135 height number of pins pa rt number pac king inner carton (1-reel) outer carton 0.9 mm 11 ayf331165 5,000 pieces 10,000 pieces 25 ayf332565 51 ayf335165 item speci?ations conditions electrical characteristics rated current 0.2a/pin contact rated voltage 50v ac/dc insulation resistance min. 1,000m ? (initial) using 250v dc megger (applied for 1 min.) breakdown voltage 150v ac for 1 min. no short-circuiting or damage at a detection current of 1 ma when the speci?d voltage is applied for one minute. contact resistance max. 100m ? based on the contact resistance measurement method speci?d by jis c 5402. mechanical characteristics fpc holding force y3b: min. 0.13n/pin contacts pin contacts (initial) y3bw: min. 0.13n/pin contacts pin contacts + 1.00n (initial) measurement of the maximum force applied until the inserted compatible fpc is pulled out in the insertion axis direction while the connector lever is closed environmental characteristics ambient temperature ?5 c to +85 c no freezing at low temperatures. no dew condensation. storage temperature ?5c to +85 c (product only) ?0c to +50 c (emboss packing) thermal shock resistance (with fpc mated) 5 cycles, insulation resistance min. 100m ?, contact resistance max. 80m ? conformed to mil-std-202f, method 107g humidity resistance (with fpc mated) 120 hours, insulation resistance min. 100m ?, contact resistance max. 100m ? bath temperature 40 2c, humidity 90 to 95% r.h. saltwater spray resistance (with fpc mated) 24 hours, insulation resistance min. 100m ?, contact resistance max. 100m ? bath temperature 35 2c, saltwater concentration 5 1% h 2 s resistance (with fpc mated) 48 hours, contact resistance max. 100m ? bath temperature 40 2c, gas concentration 3 1 ppm, humidity 75 to 80% r.h. soldering heat resistance peak temperature: 260 c or less re?w soldering 300 c within 5 sec. 350 c within 3 sec. soldering iron lifetime characteristics insertion and removal life 20 times repeated insertion and removal: min. 10 sec./time unit weight y3b: 61 pin contact type: 0.10 g y3bw: 51 pin contact type: 0.09 g order temperature ( c) time (minutes) 1 2 3 4 ?5 85 ?5 0 ?3 30 max. 5 30 max. 5 +3 0 0 ?3 panasonic corporation automation controls business division industrial.panasonic.com/ac/e/ ayf33 acctb47e 201303-t 2. material and surface treatment dimensions (unit: mm) y3b pa rt name material surface treatment molded portion housing: lcp resin (ul94v-0) lever: lcp resin (ul94v-0) contact copper alloy contact portion; base: ni plating, surface: au plating te r minal portion; base: ni plating, surface: au plating the cad data of the products with a cad data mark can be downloaded from: http://industrial.panasonic.com/ac/e/ (contact) the degree of terminal flat 0.1 0.600.10 (terminal pitch) 0.300.10 (contact pitch) 0.60 0.10 (terminal pitch) 1.35 (suction area) 3.90 1.800.20 1.800.20 (0.30) (0.40) (0.10) (0.10) (3.15) (1.35) (fpc insertion depth) 0.900.10 2.95 (1.84) (1.84) 0.900.10 2.95 (3.15) (1.35) (fpc insertion depth) (0.10) (0.10) (0.40) (0.30) c0.20 b0.20 a 1.35 (suction area) 0.60 0.10 (terminal pitch) 0.30 0.10 (terminal pitch) 0.60 0.10 (terminal pitch) 0.1 (contact) te rm inal coplanarity no. of pins: odd number no. of pins: even number (8 pins) number of pins/ dimension a b c 7 3.60 1.80 1.20 9 4.20 2.40 1.80 11 4.80 3.00 2.40 13 5.40 3.60 3.00 15 6.00 4.20 3.60 17 6.60 4.80 4.20 21 7.80 6.00 5.40 23 8.40 6.60 6.00 25 9.00 7.20 6.60 27 9.60 7.80 7.20 31 10.80 9.00 8.40 33 11.40 9.60 9.00 35 12.00 10.20 9.60 37 12.60 10.80 10.20 39 13.20 11.40 10.80 45 15.00 13.20 12.60 51 16.80 15.00 14.40 61 19.80 18.00 17.40 cad data cad data panasonic corporation automation controls business division industrial.panasonic.com/ac/e/ ayf33 acctb47e 201303-t recommended fpc dimensions y3b 3.000.50 (reinforcing plate) 0.200.03 0.15 max. 0.10 max. 0.600.07 0.10 max. 0.200.02 2.000.30 (exposed part of the conductor) 1.550.15 1.450.15 1.350.15 0.750.10 0.650.10 2-r0.20 a0.05 0.600.02 (pitch) 0.600.07 0.300.02 (pitch) 0.600.02 (pitch) c0.03 b0.03 0.300.07 (contact width) +0.04 ?.03 0.30 (contact width) +0.04 ?.03 0.30 cutting direction* *cut fpc from the copper foil side to the reinforcing plate side. 0.300.07 (finished thickness: t = 0.2 0.03) the conductive parts should be based by ni plating and then au plating. no. of pins: odd number no. of pins: even number (8 pins) for top contacts for bottom contacts number of pins/ dimension a b c 7 2.40 1.80 1.20 9 3.00 2.40 1.80 11 3.60 3.00 2.40 13 4.20 3.60 3.00 15 4.80 4.20 3.60 17 5.40 4.80 4.20 21 6.60 6.00 5.40 23 7.20 6.60 6.00 25 7.80 7.20 6.60 27 8.40 7.80 7.20 31 9.60 9.00 8.40 33 10.20 9.60 9.00 35 10.80 10.20 9.60 37 11.40 10.80 10.20 39 12.00 11.40 10.80 45 13.80 13.20 12.60 51 15.60 15.00 14.40 61 18.60 18.00 17.40 0.300.02 (pitch) 0.600.02 (pitch) 1.800.03 1.800.03 0.600.07 0.600.02 (pitch) 0.300.07 0.300.07 0.600.07 2.700.05 2-r0.20 0.10 max. 0.15 max. 0.10 max. 0.200.02 0.650.10 0.750.10 1.350.15 1.450.15 1.550.15 2.000.30 (conductor exposed area) 0.200.03 3.000.50 (reinforcing board) 0.30 (width of contact area) +0.04 ?0.03 0.30 (width of contact area) +0.04 ?0.03 cutting direction* *cut fpc from the copper foil side to the reinforcing board side. 0.200.03 3.000.50 (reinforcing board) 0.10 max. 0.10 max. 0.200.02 0.30 (width of contact area) +0.04 ?0.03 0.30 (width of contact area) +0.04 ?0.03 1.800.03 1.800.03 0.600.02 (pitch) 0.300.02 (pitch) 0.15 max. 0.650.10 0.750.10 1.350.15 1.450.15 1.550.15 2.000.30 (conductor exposed area) 0.600.07 0.600.02 (pitch) 0.300.07 0.300.07 0.600.07 2-r0.20 2.700.05 cutting direction* *cut fpc from the copper foil side to the reinforcing board side. panasonic corporation automation controls business division industrial.panasonic.com/ac/e/ ayf33 acctb47e 201303-t dimensions (unit: mm) y3bw recommended fpc dimensions y3bw the cad data of the products with a cad data mark can be downloaded from: http://industrial.panasonic.com/ac/e/ 0.600.10 (contact pitch) 0.600.10 (contact pitch) b0.20 0.900.10 te r minal coplanarity (contact and holding contact) (0.10) (3.15) (2.95) (1.35) (fpc insertion depth) (0.30) 1.35 (suction area) (0.40) (1.84) (0.10) (0.10) c0.20 d0.20 holding contacts (the holding contacts cannot be used as conductors.) 0.300.10 (contact pitch) a 0.1 number of pins/ dimension a b c d 11 5.40 3.00 2.40 3.60 25 9.60 7.20 6.60 7.80 51 17.40 15.00 14.40 15.60 general tolerance: 0.3 cad data a0.05 0.200.03 0.650.10 0.750.10 1.350.15 1.450.15 1.550.15 2.000.30 (exposed part of the conductor) 3.00 0.50 (support plates) b0.03 c0.03 0.600.02 (pitch) 0.600.02 (pitch) 0.200.02 0.900.07 0.600.07 0.900.07 0.300.02 (pitch) 0.10 max. 0.10 max. 0.600.07 r0.20 r0.20 1.450.10 0.750.05 0.15 max. 2-r0.20 0.30 (contact width) +0.04 ?0.03 0.30 (contact width) +0.04 ?0.03 0.45 +0.03 ?0.05 cutting direction cut fpc from the copper foil side to the reinforcing plate side. (finished thickness: t = 0.2 0.03) the conductive parts should be based by ni plating and then au plating. number of pins/ dimension a b c 11 4.20 3.00 2.40 25 8.40 7.20 6.60 51 16.20 15.00 14.40 panasonic corporation automation controls business division industrial.panasonic.com/ac/e/ ayf33 acctb47e 201303-t embossed tape dimensions (unit: mm) (common for respective contact type) y3b dimension table (unit: mm) y3bw dimension table (unit: mm) connector orientation with respect to embossed tape feeding direction notes number of pins type of taping a b c quantity per reel 7 to 17 tape i 16.00 7.50 17.40 5,000 21 to 45 tape i 24.00 11.50 25.40 5,000 51, 61 tape ii 32.00 14.20 33.40 5,000 number of pins type of taping a b c quantity per reel 11 tape i 16.00 7.50 17.40 5,000 25 tape i 24.00 11.50 25.40 5,000 51 tape ii 32.00 14.20 33.40 5,000 speci?ations for taping speci?ations for the plastic reel (in accordance with eiaj et -7200b.) 28.40 (b) (b) (1.75) (1.75) (4.0) (2.0) (8.0) (4.0) (2.0) (8.0) (a0.3) tape i tape ii (a0.3) leading direction after packaging 1.50 dia. +0.1 0.0 1.50 dia. +0.1 0.0 embossed mounting-hole taping reel top cover tape embossed carrier tape 380 dia. (c1) label type direction of tape progress y3b y3bw 1. recommended pc board and metal mask patterns connectors are mounted with high pitch density, intervals of 0.3 mm or 0.5 mm. in order to reduce solder and ?x rise, solder bridges and other issues make sure the proper levels of solder is used. the ?ures to the right are recommended metal mask patterns. please use them as a reference. ?y3b no. of pins: odd number recommended pc board pattern (mounting layout) (top view) recommended metal mask pattern metal mask thickness: when 120 m (front terminal portion opening area ratio: 96%) (back terminal portion opening area ratio: 96%) no. of pins: even number (8 pins) recommended pc board pattern (mounting layout) (top view) recommended metal mask pattern metal mask thickness: when 120 m (front terminal portion opening area ratio: 96%) (back terminal portion opening area ratio: 96%) 0.600.03 0.600.03 0.230.03 0.230.03 0.340.03 0.440.03 3.150.03 0.600.01 0.220.01 0.600.01 0.220.01 0.340.01 0.440.01 3.150.01 0.600.03 0.230.03 0.600.03 0.230.03 0.340.03 0.440.03 3.150.03 0.600.01 0.220.01 0.600.01 0.220.01 0.340.01 0.440.01 3.150.01 panasonic corporation automation controls business division industrial.panasonic.com/ac/e/ ayf33 acctb47e 201303-t ?y3bw recommended pc board pattern (mounting layout) (top view) recommended metal mask pattern metal mask thickness: when 120 m (front terminal portion opening area ratio: 96%) (back terminal portion opening area ratio: 96%) 0.340.03 0.440.03 3.150.03 0.600.03 0.230.03 0.300.03 0.600.03 0.230.03 : insulation 0.600.01 0.220.01 0.600.01 0.220.01 0.340.01 0.440.01 3.150.01 please refer to the latest product speci?ations when designing your product. panasonic corporation automation controls business division industrial.panasonic.com/ac/e/ acctb13e 201303-t notes on using fpc connectors pc board design design the recommended foot pattern in order to secure the mechanical strength in the soldered areas of the terminal. fpc and equipment design design the fpc based with recommended dimensions to ensure the required connector performance. when using back lock type, secure enough space for closing the lever and for open-close operation of the lever. make sure that connector positioning and fpc length are appropriate to prevent diagonal insertion of the fpc. due to the fpc size, weight, or the reaction force of the routed fpc, fpc may be removed. carefully check the equipment design. ta ke required measures to prevent the fpc from being removed due to a fall, vibration, or other impact. (y3bw/y5bw) the holding contacts cannot be used as conductors. the holding contacts are located on both ends of the contacts, and the shape of the soldered portions is the same as that of the other contacts. use caution to ensure connect identi?ation. (y3bl) soldering terminal structure since soldering terminals touch fpc, note that the short circuit may occur when the metal parts exposed on side of fpc. connector mounting excessive mounter chucking force may deform the molded or metal part of the connector. consult us in advance if chucking is to be applied. soldering 1) manual soldering due to the connector s compact size, if an excessive amount of solder is applied during manual soldering, the solder may creep up and ?x wicking near the contact points, or solder interference may cause contact failure. make sure that the soldering iron tip is heated within the temperature and time limits indicated in the speci?ations. flux from the solder wire may adhere to the contact surfaces during soldering operations. after soldering, carefully check the contact surfaces and cleans off any ?x solder use. be aware that a load applied to the connector terminals while soldering may displace the contact. thoroughly clean the iron tip. 2) re?w soldering screen-printing is recommended for printing paste solder. to achieve the appropriate soldering state, make sure that the re?w temperature, pc board foot pattern, window size and thickness of metal mask are recommended condition. note that excess solder on the terminals prevents complete insertion of the fpc, and causes ?x climbing up. a screen thickness of 120 m is recommended during cream solder printing. consult us when using a screen-printing thickness other than that recommended. depending on the size of the connector being used, self alignment may not be possible. accordingly, carefully position the terminal with the pc board pattern. the recommended re?w temperature pro?e is given in the ?ure below. the temperature is measured on the surface of the pc board near the connector terminals. depending on re?w condition, poor contact may occur by solder and ?x wicking. please set the re?w conditions that considering the characteristics of solder and ?x. also please make consideration in setting the re?w times and o 2 concentration to prevent poor contact by solder and ?x wicking. when performing re?w soldering on the back of the pc board after re?w soldering the connector, secure the connector using, for example, an adhesive. (double re?w soldering on the same side is possible.) do not touch the lever or apply any load to the lever until the second re?w soldering. otherwise, contact de?ction occurs and the terminals may be deformed by re?w heating. 3) reworking on a soldered portion finish reworking in one operation. for reworking of the solder bridge, use a soldering iron with a ?t tip. do not add ?x, otherwise the ?x may creep to the contact parts. when adding the solder for reworking, do not add an excessive solder. otherwise, solder and ?x may creep up and solder bridges may occur. use a soldering iron whose tip temperature is within the temperature range speci?d in the speci?ations. do not drop or handle the connector carelessly. otherwise, the terminals may become deformed due to excessive force or applied solderability may be during re?w degrade. do not open/close the lever or insert/remove an fpc until the connector is soldered. forcibly applied external pressure on the terminals can weaken the adherence of the terminals to the molded part or cause the terminals to lose their evenness. in addition, do not insert an fpc into the connector before soldering the connector. when cutting or bending the pc board after mounting the connector, be careful that the soldered sections are subjected to excessive force. 150c 180c 230c 220c 200c 260c te mperature upper limit (soldering heat resistance) lower limit (solder wettability) preheating peak temperature time 25 sec. 70 sec. 60 to 120 sec. the soldered areas should not be subjected to force. panasonic corporation automation controls business division industrial.panasonic.com/ac/e/ notes on using fpc connectors acctb13e 201303-t precautions for insertion/removal of fpc panasonic corporation automation controls business division industrial.panasonic.com/ac/e/ notes on using fpc connectors acctb13e 201303-t remove the fpc at parallel with the lever fully opened. if the le ver is closed, or if the fpc is forcedly pulled, the product or fpc may break. if a lever is accidentally detached during the handling of a connector, do not use the connector any longer. after an fpc is inserted, carefully handle it so as not to apply excessive stress to the base of the fpc. when using fpc with a bent condition, please pay attention to precautions below; otherwise, in some conditions it may cause conduction failure, connector breakage, unlocking lever or fpc disconnection. design so that a load is not applied to connector directly by fpc bending. avoid sharp fpc bending at the root of fpc insertion part. design so that a load is not applied to the part of fpc bending. fix the fpc if there might be a load on fpc when using the fpc with cutout, do not apply a bending load to the cutout part of fpc. otherwise, it may cause fpc disconnection and deformation since the cutout part of fpc is subjected to bending stress. other cautions when coating the pc board after soldering the connector (to prevent the deterioration of insulation), perform the coating in such a way so that the coating does not get on the connector. the connectors are not meant to be used for switching. there is no problem on the product quality though the swelling and the black spot, etc. might be generated in the molding parts. please refer to the latest product speci?ations when designing your product. fpc cutout part |
Price & Availability of AYF331735 |
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |