View TCR5SB37_6739768.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

tcr5sb15~tcr5sb50 2008-10-16 1 toshiba cmos linear integrat ed ci rcuit silicon monolithic tcr5sb15~tcr5sb50 200 ma cmos low-dropout regulators (point regulators) the tcr5sb15 to tcr5sb50 are cmos general-purpose single-output voltage regulators with an on/off control input, featuring low dropout voltage and low quiescent bias current. the tcr5sb15 to tcr5sb50 can be enabled and disabled via the control pin. these voltage regulators are available in fixed output voltages between 1.5 v and 5.0 v in 0.1-v steps and capable of driving up to 200 ma. they feature overcurrent protection. the tcr5sb15 to tcr5sb50 are offered in the compact smv (sot23-5) (sc-74a) and allow the use of small ceramic input and output capacitors. thus, these devices are ideal for portable applications that requ ire high-density board assembly such as cellular phones. features ? low quiescent bias current ( i b = 40 a (typ.) at i out = 0 ma ) ? low stand-by current ( i b(off) = 0.1 a (typ.) @ stand-by mode ) ? low-dropout voltage ( v in - v out = 85 mv (typ.) at tcr5sb30, i out = 50 ma ) ? high current output ( i out = 200 ma (max) ) ? high ripple rejection ( r.r = 80 db (typ) @ i out = 10 ma, f =1khz ) ? low output noise voltage ( v no = 30 v rms (typ.) @ tcr5sb30, i out = 10 ma, 10 hz f 100 khz ) ? control voltage can be allowed from -0.3 to 6 v regardless of v in voltage. ? overcurrent protection ? ceramic capacitors can be used ( c in = 0.1 f, c out =1.0 f ) ? wide range voltage listing (please see output voltage a ccuracy at page 4 for variety of the output voltage ) ? small package, smv (sot23-5) (sc-74a) pin assignment (top view) weight: 0.014 g (typ.) v out control gnd nc v in 1 2 3 4 5
tcr5sb15~tcr5sb50 2008-10-16 2 list of products number and marking marking products no. marking products no. marking tcr5sb15 1e5 tcr5sb33 3e3 tcr5sb16 1e6 tcr5sb34 3e4 tcr5sb17 1e7 tcr5sb35 3e5 tcr5sb18 1e8 tcr5sb36 3e6 tcr5sb19 1b9 TCR5SB37 3e7 tcr5sb20 2e0 tcr5sb38 3e8 tcr5sb21 2e1 tcr5sb39 3e9 tcr5sb22 2e2 tcr5sb40 4e0 tcr5sb23 2e3 tcr5sb41 4e1 tcr5sb24 2e4 tcr5sb42 4e2 tcr5sb25 2e5 tcr5sb43 4e3 tcr5sb26 2e6 tcr5sb44 4e4 tcr5sb27 2e7 tcr5sb45 4e5 tcr5sb28 2e8 tcr5sb46 4e6 tcr5sb29 2e9 tcr5sb47 4e7 tcr5sb30 3e0 tcr5sb48 4e8 tcr5sb31 3e1 tcr5sb49 4e9 tcr5sb32 3e2 tcr5sb50 5e0 absolute maximum ratings (ta = 25c) characteristics symbol rating unit input voltage v in 6 v control voltage v ct -0.3 to 6 v output voltage v out -0.3 to v in + 0.3 v output current i out 200 ma 200 (note 1) power dissipation p d 380 (note 2) mw operation temperature range t opr ?40 to 85 c junction temperature t j 150 c storage temperature range t stg ?55 to 150 c note: using continuously under heavy loads (e.g. the application of high temperature/current/voltage and the significant change in temperature, etc.) may cause this product to decrease in the reliability significantly even if the operating conditions (i.e. operating temper ature/current/voltage, etc. ) are within the absolute maximum ratings and the operating ranges. please design the appropriate reliability upon reviewing the toshiba semiconductor reliability handbook (?handling precautions?/?derating concept and methods?) and individual reliability data (i.e. reliability test report and estimated failure rate, etc). note 1: unit ratintg note 2: rating at mounting on a board (glass epoxy board dimmention : 30 mm 30 mm, copper pad area : 50 mm 2 ) 3 e 0 example: tcr5sb30 (3.0 v output)
tcr5sb15~tcr5sb50 2008-10-16 3 electrical characteristics (unless otherwise specified, v in =v out + 1 v, i out = 50 ma, c in = 0.1 f, c out = 1.0 f, t j = 25c) characteristics symbol test condition min typ. max unit output voltage v out please refer to the output voltage accuracy table line regulation reg? line v out + 0.5 v v in 6 v, i out = 1 ma ? 3 15 mv load regulation reg ? load 1 ma i out 150 ma ? 25 75 mv quiescent current i b i out = 0 ma ? 40 75 a stand-by current i b (off) v ct = 0 v ? 0.1 1.0 a tcr5sb15 to tcr5sb20 ? 25 ? tcr5sb21 to tcr5sb30 ? 30 ? tcr5sb31 to tcr5sb36 ? 35 ? output noise voltage v no v in = v out + 1 v, i out = 10 ma, 10 hz f 100 khz, ta = 25c TCR5SB37 to tcr5sb50 ? 40 ? v rms dropout voltage v in -v out please refer to the dropout voltage table. temperature coefficient t cvo ?40c t opr 85c ? 100 ? ppm/c tcr5sb15 to tcr5sb16 v out + 0.33 v ? 6.0 tcr5sb17 to tcr5sb18 v out + 0.31 v ? 6.0 tcr5sb19 to tcr5sb23 v out + 0.25 v 6.0 tcr5sb24 to tcr5sb27 v out + 0.20 v 6.0 input voltage v in ? tcr5sb28 to tcr5sb50 v out + 0.19 v ? 6.0 v ripple rejection ratio r.r. v in = v out + 1 v, i out = 10 ma, f = 1 khz, v ripple = 500 mv p-p , ta = 25c ? 80 ? db control voltage (on) v ct (on) ? 1.5 ? 6.0 v control voltage (off) v ct (off) ? 0 ? 0.25 v control current (on) i ct (on) v ct = 6.0 v ? ? 0.1 a control current (off) i ct (off) v ct = 0.25 v ? ? 0.1 a
tcr5sb15~tcr5sb50 2008-10-16 4 output voltage accuracy ( v in = v out + 1 v, i out = 50 ma, c in = 0.1 f, c out = 1.0 f, t j = 25c) product no. symbol min typ. max unit tcr5sb15 1.47 1.5 1.53 tcr5sb16 1.56 1.6 1.64 tcr5sb17 1.66 1.7 1.74 tcr5sb18 1.76 1.8 1.84 tcr5sb19 1.86 1.9 1.94 tcr5sb20 1.96 2.0 2.04 *tcr5sb21 2.05 2.1 2.15 *tcr5sb22 2.15 2.2 2.25 tcr5sb23 2.25 2.3 2.35 *tcr5sb24 2.35 2.4 2.45 tcr5sb25 2.45 2.5 2.55 *tcr5sb26 2.54 2.6 2.66 tcr5sb27 2.64 2.7 2.76 tcr5sb28 2.74 2.8 2.86 tcr5sb29 2.84 2.9 2.96 tcr5sb30 2.94 3.0 3.06 tcr5sb31 3.03 3.1 3.17 *tcr5sb32 3.13 3.2 3.27 tcr5sb33 3.23 3.3 3.37 *tcr5sb34 3.33 3.4 3.47 tcr5sb35 3.43 3.5 3.57 *tcr5sb36 3.52 3.6 3.68 *TCR5SB37 3.62 3.7 3.78 *tcr5sb38 3.72 3.8 3.88 *tcr5sb39 3.82 3.9 3.98 tcr5sb40 3.92 4.0 4.08 *tcr5sb41 4.01 4.1 4.19 *tcr5sb42 4.11 4.2 4.29 *tcr5sb43 4.21 4.3 4.39 *tcr5sb44 4.31 4.4 4.49 tcr5sb45 4.41 4.5 4.59 *tcr5sb46 4.50 4.6 4.70 tcr5sb47 4.60 4.7 4.80 tcr5sb48 4.70 4.8 4.90 tcr5sb49 4.80 4.9 5.00 tcr5sb50 v out 4.90 5.0 5.10 v please contact your local toshiba representative if you are interested in products with * sign.
tcr5sb15~tcr5sb50 2008-10-16 5 dropout voltage ( i out = 50 ma, c in = 0.1 f, c out = 1.0 f, t j = 25c) product no. symbol min typ. max unit tcr5sb15 to tcr5sb16 ? 150 330 tcr5sb17 to tcr5sb18 ? 130 310 tcr5sb19 to tcr5sb23 ? 110 250 tcr5sb24 to tcr5sb27 ? 90 200 tcr5sb28 to tcr5sb50 v in -v out ? 85 190 mv
tcr5sb15~tcr5sb50 2008-10-16 6 application note 1. recommended application circuit the figure above shows the recommended configuration for using a low-dropout regulator. insert a capacitor at vout and vin pins for stable input/output oper ation. (ceramic capacitors can be used) if the control function is not used, toshiba reco mmend that the control pin is connected to the v in pin. 2. power dissipation power dissipation is measured on the board shown below. testing board of thermal resistance control level operation high on low off v out gnd v in 1.0 f 0.1 f control nc board material: glass epox y, board dimension 30 mm 30 mm copper area: 50 mm 2 , t = 0.8 mm c out v in v out control gnd c in nc ambient temperature t a (c) p d ? ta power dissipation p d (mw) ? 40 0 0 40 120 80 100 200 300 400 board dimension 30 mm 30 mm, t = 0.8 mm copper area 50 mm 2 , mounted on glass epoxy board unit rating
tcr5sb15~tcr5sb50 2008-10-16 7 3. ripple rejection tcr5sbxx series are designed for superior ripple rejectio n characteristic. even an output changes with steep resistance rate of the power supply voltage, characteristic of input transient response , the ripple rejection shows an extremely superior characteristics. therefore these devices are suitable for use as rf block for every cellular phone system. attention in use ? output capacitors ceramic capacitors can be used for these devices. however, because of the type of the capacitors, there might be unexpected thermal features. please consider applicat ion condition for selecti ng capacitors. and toshiba recommend the esr of ceramic capacitor is under 10 ? . ? mounting the long distance between ic and output capacitor might affect phase assurance by impedance in wire and inductor. for stable power supply, output capacitor need to mount near ic as much as possible. also gnd pattern need to be large and make the wire impedance small as possible. ? permissible loss please have enough design patterns for expected maximum permissible loss. and under consideration of surrounding temperature, input voltage, and output current etc, we reco mmend proper dissipation ratings for maximum permissible loss; in general maximu m dissipation rating is 70 to 80 percent. ? overcurrent protection circuit overcurrent protection circuit is designed in these products, but this does not assure for the suppression of uprising device operation. if output pins and gnd pins are shorted out, these products might be break down. in use of these products, please read through and under stand dissipation idea for absolute maximum ratings from the above mention or our ?semiconducto r reliability handbook?. then use t hese products under absolute maximum ratings in any condition. furthermore, toshiba recomm end inserting failsafe system into the design. input transient response (tcr5sb30) time t (ms) 0 1 4 5 8 10 input voltage 3.0 v 2 3 6 7 9 output voltage 3.1 v 3.4 v ta = 25c, c in = 0.1 f, c out = 1 f, v in : 3.4 v 3.1 v, i out = 50 ma frequency f (hz) ripple rejection ratio (db) 0 10 100 1 k 10 k 100 k 300 k 10 20 30 40 50 60 70 80 v in = 4.0 v , i out = 10 ma v ripple = 500 mv p ? p c in = none, ta = 25c 90 c out = 10 f c out = 1 f c out = 2.2 f ripple rejection ratio (tcr5sb30)
tcr5sb15~tcr5sb50 2008-10-16 8 representative typical characteristics 1) output voltage vs. input voltage 2) output voltage vs. output current tcr5sb15 output voltage v out (v) 1.4 1.5 1.6 v in = 2.5 v, c in = 0.1 f, c out = 1 f 0 60 100 200 output current i out (ma) 20 40 80 120 140 160 180 tcr5sb18 output voltage v out (v) 1.7 1.8 1.9 v in = 2.8 v, c in = 0.1 f, c out = 1 f 0 60 100 200 output current i out (ma) 20 40 80 120 140 160 180 input voltage v in (v) tcr5sb30 output voltage v out (v) 0 1 4 6 0 3 6 1 2 4 5 c in = 0.1 f, c out = 1 f 2 3 5 150 ma 50 ma i out = 10 ma input voltage v in (v) tcr5sb15 output voltage v out (v) 0 1 4 6 0 1.5 2.0 0.5 1.0 c in = 0.1 f, c out = 1 f 2 3 5 150 ma 50 ma i out = 10 ma input voltage v in (v) tcr5sb50 output voltage v out (v) 0 3 6 1 2 4 5 c in = 0.1 f, c out = 1 f 0 1 4 6 2 3 5 150 ma 50 ma i out = 10 ma input voltage v in (v) tcr5sb18 output voltage v out (v) 0 1 4 6 0 1.5 3 0.5 1 2 2.5 c in = 0.1 f, c out = 1 f 2 3 5 150 ma 50 ma i out = 10 ma
tcr5sb15~tcr5sb50 2008-10-16 9 3) output voltage vs. ambient temperature ? 50 2.96 ? 25 0 25 75 50 2.98 3.0 3.02 3.04 v in = 4 v, c in = 0.1 f, c out = 1 f i out = 50 ma 100 tcr5sb30 ambient temperature t a (c) output voltage v out (v) ? 50 1.48 ? 25 0 25 75 50 1.49 1.5 1.51 1.52 v in = 2.5 v, c in = 0.1 f, c out = 1 f i out = 50 ma 100 tcr5sb15 ambient temperature t a (c) output voltage v out (v) ? 50 4.96 ? 25 0 25 75 50 4.98 5.0 5.02 5.04 v in = 6 v, c in = 0.1 f, c out = 1 f i out = 50 ma 100 tcr5sb50 ambient temperature t a (c) output voltage v out (v) ? 50 1.78 ? 25 0 25 75 50 1.79 1.8 1.81 1.82 v in = 2.8 v, c in = 0.1 f, c out = 1 f i out = 50 ma 100 tcr5sb18 ambient temperature t a (c) output voltage v out (v) tcr5sb30 output voltage v out (v) 2.9 3.0 3.1 v in = 4 v, c in = 0.1 f, c out = 1 f 0 60 100 200 output current i out (ma) 20 40 80 120 140 160 180 tcr5sb50 output voltage v out (v) 4.9 5.0 5.1 v in = 6 v, c in = 0.1 f, c out = 1 f 0 60 100 200 output current i out (ma) 20 40 80 120 140 160 180
tcr5sb15~tcr5sb50 2008-10-16 10 4) dropout voltage vs. output current 5) quiessrnt current vs. inputvoltage tcr5sb50 quiescent current i b ( a) c in = 0.1 f, c out = 1 f 100 200 0 1 4 6 i out = 150 ma 2 3 5 input voltage v in (v) 0 0 ma 50 ma 50 250 150 tcr5sb30 quiescent current i b ( a) c in = 0.1 f, c out = 1 f 100 200 0 1 4 6 i out = 150 ma 2 3 5 input voltage v in (v) 0 0 ma 50 ma quiescent current i b ( a) tcr5sb15 c in = 0.1 f, c out = 1 f 60 120 0 1 4 6 i out = 150 ma 2 3 5 input voltage v in (v) 0 0 ma 50 ma 20 40 80 100 quiescent current i b ( a) tcr5sb18 c in = 0.1 f, c out = 1 f 60 120 0 1 4 6 i out = 150 ma 2 3 5 input voltage v in (v) 0 0 ma 50 ma 20 40 80 100 tcr5sb30 400 dropout voltage v in - v out (mv) c in = 0.1 f, c out = 1 f, 0 100 200 300 0 40 100 200 output current i out (ma) 80 180 120 140 160 60 20 25c -40c ta = 85c tcr5sb50 dropout voltage v in - v out (mv) c in = 0.1 f, c out = 1 f, 0 100 200 300 400 0 40 100 200 output current i out (ma) 80 180 120 140 160 60 20 25c -40c ta = 85c
tcr5sb15~tcr5sb50 2008-10-16 11 6) quiessrnt current vs. ambient temperature 7) overcurrent protection characteristics ambient temperature ta ( c ) tcr5sb30 ? 50 ? 25 0 25 100 75 50 0 100 200 v in = 4 v, c in = 0.1 f, c out = 1 f, i out = 150 ma 50 ma 0 ma quiescent current i b ( a) ambient temperature ta ( c ) tcr5sb15 ? 50 ? 25 0 25 100 75 50 0 100 200 v in = 2.5 v, c in = 0.1 f, c out = 1 f, i out = 150 ma 50 ma 0 ma quiescent current i b ( a) ambient temperature ta ( c ) tcr5sb50 ? 50 ? 25 0 25 100 75 50 0 100 200 v in = 6 v, c in = 0.1 f, c out = 1 f, i out = 150 ma 50 ma 0 ma quiescent current i b ( a) ambient temperature ta ( c ) tcr5sb18 ? 50 ? 25 0 25 100 75 50 0 100 200 v in = 2.8 v, c in = 0.1 f, c out = 1 f, 50 ma 0 ma quiescent current i b ( a) i out = 150 ma output voltage v out (v) pulse width = 1 ms 0 2.0 2.5 0 100 400 600 v in = 2.8 v 200 300 500 output current i out (ma) tcr5sb18 1.5 1.0 0.5 v in = 5.0 v v in = 6.0 v
tcr5sb15~tcr5sb50 2008-10-16 12 8) ripple rejection raito vs. frequency ( dependence of output current ) 9) ripple rejection ratio vs. input voltage 3.1 10 3.2 3.3 3.4 20 40 70 90 f = 1 khz 3.5 tcr5sb30 input voltage v in (v) ripple rejection ratio (db) 80 60 50 30 0 i out = 10 ma ,v ripple = 500 mv p ? p c in = none, c out = 1 f ta = 25c f = 10 khz f = 100 khz 3.1 10 3.2 3.3 3.4 20 40 70 90 f = 1 khz 3.5 tcr5sb30 input voltage v in (v) ripple rejection ratio (db) 80 60 50 30 0 i out = 30 ma ,v ripple = 500 mv p ? p c in = none, c out = 1 f ta = 25c f = 10 khz f = 100 khz 3.1 10 3.2 3.3 3.4 20 40 70 90 f = 1 khz 3.5 tcr5sb30 input voltage v in (v) ripple rejection ratio (db) 80 60 50 30 0 i out = 50 ma ,v ripple = 500 mv p ? p c in = none, c out = 1 f ta = 25c f = 10 khz f = 100 khz tcr5sb30 frequency f (hz) ripple rejection raito (db) 0 10 100 1 k 10 k 100 k 300 k 10 20 30 40 50 60 70 80 v in = 4.0 v ,v ripple = 500 mv p ? p c in = none, c out = 1 f ta = 25c 90 i out = 150 ma i out = 50 ma i out = 30 ma i out = 10 ma
tcr5sb15~tcr5sb50 2008-10-16 13 10) control transient response tcr5sb30 (turn on wave form) v in = 4 v, c in = 0.1 f, c out = 1 f i out = 50 ma control voltage v ct (on) (1v/div) output voltage v out (on) (1v/div) time t ( 100 s/div ) tcr5sb30 (turn off wave form) v in = 4 v, c in = 0.1 f, c out = 1 f i out = 50 ma control voltage v ct (off) (1v/div) output voltage v out (off) (1v/div) time t ( 100 s/div ) tcr5sb50 (turn on wave form) v in = 6 v, c in = 0.1 f, c out = 1 f i out = 50 ma control voltage v ct (on) (1v/div) output voltage v out (off) (2v/div) time t ( 100 s/div ) tcr5sb50 (turn off wave form) v in = 6 v, c in = 0.1 f, c out = 1 f i out = 50 ma control voltage v ct (off) (1v/div) output voltage v out (off) (2v/div) time t ( 100 s/div ) tcr5sb15 (turn on wave form) v in = 2.5 v, c in = 0.1 f, c out = 1 f i out = 50 ma control voltage v ct (on) (1v/div) output voltage v out (on) (1v/div) time t ( 100 s/div ) tcr5sb15 (turn off wave form) v in = 2.5 v, c in = 0.1 f, c out = 1 f i out = 50 ma control voltage v ct (off) (1v/div) output voltage v out (off) (1v/div) time t ( 100 s/div )
tcr5sb15~tcr5sb50 2008-10-16 14 11) load transient response output voltage S v out (50mv/div) output current i out (20ma/div) tcr5sb30 (i out =1m to 30ma) time t ( 5 s/div ) v in = 4 v, c in = 0.1 f, c out = 1 f tcr5sb30 (i out = 30m to 1ma) output current i out (20ma/div) output voltage S v out (50mv/div) time t ( 20 s/div ) v in = 4 v, c in = 0.1 f, c out = 1 f tcr5sb15 (i out = 50m to 100ma) output voltage S v out (50mv/div) output current i out (50ma/div) time t ( 5 s/div ) v in = 2.5 v, c in = 0.1 f, c out = 1 f tcr5sb15 (i out = 100m to 50ma) output current i out (50ma/div) output voltage S v out (50mv/div) time t ( 20 s/div ) v in = 2.5 v, c in = 0.1 f, c out = 1 f tcr5sb15 (i out = 1m to 30ma) output voltage S v out (50mv/div) output current i out (20ma/div) time t ( 5 s/div ) v in = 2.5 v, c in = 0.1 f, c out = 1 f tcr5sb15 (i out = 30m to 1ma) output current i out (20ma/div) output voltage S v out (50mv/div) time t ( 20 s/div ) v in = 2.5 v, c in = 0.1 f, c out = 1 f
tcr5sb15~tcr5sb50 2008-10-16 15 tcr5sb30 (i out = 50m to 100ma) output voltage S v out (50mv/div) output current i out (50ma/div) time t ( 5 s/div ) v in = 4 v, c in = 0.1 f, c out = 1 f tcr5sb30 (i out = 100m to 50ma) output current i out (50ma/div) output voltage S v out (50mv/div) time t ( 20 s/div ) v in = 4 v, c in = 0.1 f, c out = 1 f tcr5sb50 (i out =1m to 30ma) time t ( 5 s/div ) output voltage S v out (50mv/div) output current i out (20ma/div) v in = 6 v, c in = 0.1 f, c out = 1 f tcr5sb50 (i out = 30m to 1ma) output current i out (20ma/div) output voltage S v out (50mv/div) time t ( 20 s/div ) v in = 6 v, c in = 0.1 f, c out = 1 f tcr5sb50 (i out = 50m to 100ma) output voltage S v out (50mv/div) output current i out (50ma/div) time t ( 5 s/div ) v in = 6 v, c in = 0.1 f, c out = 1 f tcr5sb50 (i out = 100m to 50ma) output current i out (50ma/div) output voltage S v out (50mv/div) time t ( 20 s/div ) v in = 6 v, c in = 0.1 f, c out = 1 f
tcr5sb15~tcr5sb50 2008-10-16 16 package dimensions weight: 0.014 g (typ)
tcr5sb15~tcr5sb50 2008-10-16 17 restrictions on product use ? toshiba corporation, and its subsidiaries and affiliates (collect ively ?toshiba?), reserve the right to make changes to the in formation in this document, and related hardware, software a nd systems (collectively ?product?) without notice. ? this document and any information herein may not be reproduc ed without prior written permission from toshiba. even with toshiba?s written permission, reproduc tion is permissible only if reproducti on is without alteration/omission. ? though toshiba works continually to improve product?s quality and reliability, product can malfunction or fail. customers are responsible for complying with safety standards and for prov iding adequate designs and safeguards for their hardware, software and systems which minimize risk and avoid situations in which a ma lfunction or failure of product could cause loss of human life, b odily injury or damage to property, including data loss or corruption. before customers use the product, create designs including the product, or incorporate the product into their own applications, cu stomers must also refer to and comply with (a) the latest versions of all relevant toshiba information, including without limitation, this document, the specifications, the data sheets and application notes for product and the precautions and condi tions set forth in the ?toshiba semiconductor reliability handbook? and (b) the instructions for the application with which the product will be us ed with or for. customers are solely responsible for all aspe cts of their own product design or applications, including but not limited to (a) determining the appropriateness of the use of this product in such design or applications; (b) eval uating and determining the applicability of any info rmation contained in this document, or in c harts, diagrams, programs, algorithms, sample application circuits, or any other referenced documents; and (c) validating all operatin g parameters for such designs and applications. toshiba assumes no liability for customers? product design or applications. ? product is intended for use in general el ectronics applications (e.g., computers, personal equipment, office equipment, measur ing equipment, industrial robots and home electroni cs appliances) or for specif ic applications as expre ssly stated in this document . product is neither intended nor warranted for use in equipment or systems that require extraordinarily high levels of quality a nd/or reliability and/or a malfunction or failure of which may cause loss of human life, bodily injury, serious property damage or se rious public impact (?unintended use?). unintended use includes, without limitation, equipment used in nuclear facilities, equipment used in the aerospace industry, medical equipment, equipment used for automobiles, trains, ships and other transportation, traffic s ignaling equipment, equipment used to control combustions or explosions, safety dev ices, elevators and escalato rs, devices related to el ectric power, and equipment used in finance-related fields. do not use product for unintended use unless specifically permitted in thi s document. ? do not disassemble, analyze, reverse-engineer, alter, modify, translate or copy product, whether in whole or in part. ? product shall not be used for or incorporated into any products or systems whose manufacture, use, or sale is prohibited under any applicable laws or regulations. ? the information contained herein is pres ented only as guidance for product use. no re sponsibility is assumed by toshiba for an y infringement of patents or any other intellectual property rights of third parties that may result from the use of product. no license to any intellectual property right is granted by this document, whether express or implied, by estoppel or otherwise. ? a bsent a written signed agreement, except as provid ed in the relevant terms and conditions of sale for product, and to the maximum extent allowable by law, toshiba (1) assumes no liability whatsoever, including without limitation, indirect, co nsequential, special, or incidental damages or loss, including without limitation, loss of profit s, loss of opportunities, business interruption and loss of data, and (2) disclaims any and all express or implied warranties and conditions related to sale, use of product, or information, including warranties or conditions of merchantability, fitness for a particular purpose, accuracy of information, or noninfringement. ? do not use or otherwise make available product or related so ftware or technology for any military purposes, including without limitation, for the design, development, use, stockpiling or m anufacturing of nuclear, chemical , or biological weapons or missi le technology products (mass destruction w eapons). product and related software and technology may be controlled under the japanese foreign exchange and foreign trade law and the u.s. expor t administration regulations. ex port and re-export of product or related software or technology are strictly prohibited exc ept in compliance with all applicable export laws and regulations. ? please contact your toshiba sales representative for details as to environmental matters such as the rohs compatibility of pro duct. please use product in compliance with all applicable laws and regula tions that regulate the inclusion or use of controlled subs tances, including without limitation, the eu rohs directive. toshiba assumes no liability for damages or losses occurring as a result o f noncompliance with applicable laws and regulations.

▲Up To Search▲

Price & Availability of TCR5SB37

	To Download TCR5SB37 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .