inches (millimeters) customer drawings available upon request cambridge products, p.o. box 1732, waseca, mn 56093-0832 1-800-243-8814 fax: 507-833-6287 www.cambridgeproducts.com mini-uhf straight crimp type plug - solder or crimp contact, 4 piece part number cable type contact i.d. body i.d. ferrule i.d. termination MINI-UHF-19 rg-174, 188, 316 .0245 (0.62) .110 (2.79) .110 (2.79) crimp insert 1. identify connector parts. (4 piece parts) 2. slide crimp insert over cable and strip cable jacket to dimension shown. do not nick braid or center conductor during strip op- erations. 3. flair braid and fold back around crimp in- sert as shown. strip cable insulation to di- mension shown. do not nick center con- ductor. tin center conductor if contact will be solder attached. do not tin center con- ductor if contact is to be crimp attached. 4. assemble contact onto cable as shown. solder attachment: solder contact to center conductor through hole using a mini- mum amount of solder for a good joint. crimp attachment: crimp contact to cen- ter conductor using recommended crimp hex. 5. slide coupling nut onto the connector body. 6. slide body assembly over contact and other connector parts until a gentle snap is felt, indicating the contact is in place. crimp the body assembly in the location shown using the appropriate crimping tool. contact body ferrule crimp contact recommended part number cable i.d. i.d. i.d. (braid hex) crimp hex crimp tool MINI-UHF-19 rg-174,188, 316 .0245 (0.62) .110 (2.79) .110 (2.79) .184 (4.67) .060 (1.52) 24-306p
cambridge products, p.o. box 1732, waseca, mn 56093-0832 1-800-243-8814 fax: 507-833-6287 www.cambridgeproducts.com inches (millimeters) customer drawings available upon request mini-uhf connectors specifications mini uhf electrical characteristics impedance: nonconstant frequency range: 0-2 ghz working voltage: 500 volts rms at sea level dielectric withstanding voltage: 1500 volts rms at sea level insulation resistance: 5000 megohms minimum environmental characteristics recommended temperature range: -55 o c to +85 o c mechanical characteristics durability: 500 cycles cable retention: 20 lbs., rg-58 c/u cable materials body and coupling nut: zinc or brass contact: brass crimp sleeve: brass insulator: tpx polymethylpetene plating: body - nickel crimp sleeve - nickel contact - gold mini uhf connectors are low cost, general purpose units designed for low frequency system applications. these commercial quality connectors are equipped with threaded coupling interfaces for secure and reliable connections. the standard uhf and mini uhf connectors are not intermateable. * these values are typical and may not apply to all connectors. specifications*
|
