View 62002P_6947205.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

td62001~004p/ap/f/af 2001-06-27 1 toshiba bipolar digital integrated circuit silicon monolithic td62001p,td62001ap,td62001f,td62001af,td62002P td62002ap,td62002f,td62002af,td62003p,td62003ap,td62003f td62003af,td62004p,td62004ap,td62004f,td62004af 7ch darlington sink driver the td62001p / ap / f / af series are high ? voltage, high ? current darlington drivers comprised of seven npn darlington pairs. all units feature integral clamp diodes for switching inductive loads. applications include relay, hammer, lamp and display (led) drivers. features output current (single output) 500 ma max. high sustaining voltage output 35 v min. (td62001p / f series) 50 v min. (td62001ap / af series) output clamp diodes inputs compatible with various types of logic package type ? p, ap : dip ? 16 pin package type ? f, af : sop ? 16 pin type input base resistor designation td62001p / ap / f / af external general purpose td62002P / ap / f / af 10.5 ? k ? + 7 v zenner diode 14~25 v pmos td62003p / ap / f / af 2.7 k ? ttl, 5 v cmos td62004p / ap / f / af 10.5 k ? 6~15 v pmos, cmos pin connection (top view) weight dip16 ? p ? 300 ? 2.54a : 1.11 g (typ.) sop16 ? p ? 225 ? 1.27 : 0.16 g (typ.) free datasheet http:///
td62001~004p/ap/f/af 2001-06-27 2 schematics (each driver) td62001p / ap / f / af td62002P / ap / f / af td62003p / ap / f / af td62004p / ap / f / af note: the input and output parasitic diodes cannot be used as clamp diodes. maximum ratings (ta = 25c) characteristic symbol rating unit p, f ? 0.5~35 output sustaining voltage ap, af v ce (sus) ? 0.5~50 v output current i out 500 ma / ch input voltage v in (note 1) ? 0.5~30 v input current i in (note 2) 25 ma p, f 35 clamp diode reverse voltage ap, af v r 50 v clamp diode forward current i f 500 ma p 1.0 ap 1.47 power dissipation f, af p d 0.54 / 0.625 (note 3) w p ? 30~75 operating temperature ap, f, af t opr ? 40~85 c storage temperature t stg ? 55~150 c note 1: except td62001p / ap / f / af note 2: only td62001p / ap / f / af note 3: on glass epoxy pcb (30 30 1.6 mm cu 50%)
td62001~004p/ap/f/af 2001-06-27 3 recommended operating conditions (ta = ? 40~85c and ta = ? 30~75c for only type ? p) characteristic symbol condition min typ. max unit p, f 0 D 35 output sustaining voltage ap, af v ce (sus) 0 D 50 v duty = 10% 0 D 370 ap duty = 50% 0 D 130 duty = 10% 0 D 295 p duty = 50% 0 D 95 duty = 10% 0 D 233 output current f, af i out t pw = 25 ms 7 circuits ta = 85c t j = 120c duty = 50% 0 D 70 ma / ch input voltage except td62001p / ap / f / af v in 0 D 24 v td62002 14.5 D 24 td62003 2.8 D 24 input voltage (output on) td62004 v in (on) i out = 400 ma h fe = 800 6.2 D 24 v td62001 0 D 0.6 td62002 0 D 7.4 td62003 0 D 0.7 input voltage (output off) td62004 v in (off) 0 D 1.0 v input current only td62001 i in 0 D 10 ma p, f D D 35 clamp diode reverse voltage ap, af v r D D 50 v clamp diode forward current i f D D 350 ma p D D 0.6 ap ta = 85c D D 0.76 power dissipation af, f p d ta = 85c (note) D D 0.325 w note: on glass epoxy pcb (30 30 1.6 mm cu 50%)
td62001~004p/ap/f/af 2001-06-27 4 electrical characteristics (ta = 25c unless otherwise noted) characteristic symbol test cir ? cuit test condition min typ. max unit v ce = 50 v, ta = 25c D D 50 ap, af v ce = 50 v, ta = 85c D D 100 v ce = 35 v, ta = 25c D D 50 f v ce = 35 v, ta = 85c D D 100 v ce = 35 v, ta = 25c D D 50 output leakage current p i cex 1 v ce = 35 v, ta = 75c D D 100 a i out = 350 ma, i in = 500 a D 1.3 1.6 i out = 200 ma, i in = 350 a D 1.1 1.3 collector ? emitter saturation voltage v ce (sat) 2 i out = 100 ma, i in = 250 a D 0.9 1.1 v dc current transfer ratio h fe 2 v ce = 2 v, i out = 350 ma 1000 D D td62002 v in = 20 v, i out = 350 ma D 1.1 1.7 td62003 v in = 2.4 v, i out = 350 ma D 0.4 0.7 input current (output on) td62004 i in (on) 3 v in = 9.5 v, i out = 350 ma D 0.8 1.2 ma p i out = 500 a, ta = 75c 50 65 D input current (output off) ap, f, af i in (off) 4 i out = 500 a, ta = 85c 50 65 D a i out = 350 ma D D 13.7 td62002 i out = 200 ma D D 11.4 i out = 350 ma D D 2.6 td62003 i out = 200 ma D D 2.0 i out = 350 ma D D 4.7 input voltage (output on) td62004 v in (on) 5 v ce = 2 v h fe = 800 i out = 200 ma D D 4.4 v v r = 50 v, ta = 25c D D 50 ap, af v r = 50 v, ta = 85c D D 100 v r = 35 v, ta = 25c D D 50 f v r = 35 v, ta = 85c D D 100 v r = 35 v, ta = 25c D D 50 clamp diode reverse current p i r 6 v r = 35 v, ta = 75c D D 100 a clamp diode forward voltage v f 7 i f = 350 ma D D 2.0 v input capacitance c in D D 15 D pf p, f v out = 35 v, r l = 87.5 ? c l = 15 pf D 0.1 D turn ? on delay ap, af t on 8 v out = 50 v, r l = 125 ? c l = 15 pf D 0.1 D p, f v out = 35 v, r l = 87.5 ? c l = 15 pf D 0.2 D turn ? off delay ap, af t off 8 v out = 50 v, r l = 125 ? c l = 15 pf D 0.2 D s
td62001~004p/ap/f/af 2001-06-27 5 test circuit 1. i cex 2. v ce (sat) , h fe 3. iin (on) 4. i in (off) 5. v in (on) 6. i r 7. v f
td62001~004p/ap/f/af 2001-06-27 6 8. t on , t off note 1: pulse width 50 s, duty cycle 10% output impedance 50 ? , t r 5 ns, t f 10 ns note 2: see below input condition type number r1 v ih td62001p / ap / f / af 2.7 k ? 3 v td62002P / ap / f / af 0 13 v td62003p / ap / f / af 0 3 v td62004p / ap / f / af 0 8 v note 3: c l includes probe and jig capacitance. precautions for using this ic does not include built-in protection circuits for excess current or overvoltage. if this ic is subjected to excess current or overvoltage, it may be destroyed. hence, the utmost care must be taken when systems which incorporate this ic are designed. utmost care is necessary in the design of the output line, common and gnd line since ic may be destroyed due to short ? circuit between outputs, air contamination fault, or fault by improper grounding.
td62001~004p/ap/f/af 2001-06-27 7
td62001~004p/ap/f/af 2001-06-27 8
td62001~004p/ap/f/af 2001-06-27 9
td62001~004p/ap/f/af 2001-06-27 10
td62001~004p/ap/f/af 2001-06-27 11 package dimensions dip16 ? p ? 300 ? 2.54a unit : mm weight: 1.11 g (typ.)
td62001~004p/ap/f/af 2001-06-27 12 package dimensions sop16 ? p ? 225 ? 1.27 unit : mm weight: 0.16 g (typ.)
td62001~004p/ap/f/af 2001-06-27 13 toshiba is continually working to improve the quality and reliability of its products. nevertheless, semiconductor devices in general can malfunction or fail due to their inherent electrical sensitivity and vulnerability to physical stress. it is the responsibility of the buyer, when utilizing toshiba products, to comply with the standards of safety in making a safe design for the entire system, and to avoid situations in which a malfunction or failure of such toshiba products could cause loss of human life, bodily injury or damage to property. in developing your designs, please ensure that toshiba products are used within specified operating ranges as set forth in the most recent toshiba products specifications. also, please keep in mind the precautions and conditions set forth in the ?handling guide for semiconductor devices,? or ?toshiba semiconductor reliability handbook? etc.. the toshiba products listed in this document are intended for usage in general electronics applications (computer, personal equipment, office equipment, measuring equipment, industrial robotics, domestic appliances, etc.). these toshiba products are neither intended nor warranted for usage in equipment that requires extraordinarily high quality and/or reliability or a malfunction or failure of which may cause loss of human life or bodily injury (?unintended usage?). unintended usage include atomic energy control instruments, airplane or spaceship instruments, transportation instruments, traffic signal instruments, combustion control instruments, medical instruments, all types of safety devices, etc.. unintended usage of toshiba products listed in this document shall be made at the customer?s own risk. the products described in this document are subject to the foreign exchange and foreign trade laws. the information contained herein is presented only as a guide for the applications of our products. no responsibility is assumed by toshiba corporation for any infringements of intellectual property or other rights of the third parties which may result from its use. no license is granted by implication or otherwise under any intellectual property or other rights of toshiba corporation or others. the information contained herein is subject to change without notice. 000707eb a restrictions on product use

▲Up To Search▲

Price & Availability of 62002P

	To Download 62002P Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .