ee-sx470/471/472/473/474/670/671/672/673/674(p) photomicrosensor with 50 ma (pnp) or 100 ma (npn) switching capacity that can be built into equipment new pnp models are now available standard, l-shaped, t-shaped, and close mounting models available models available with light-on or light-on/dark-on output configurations response frequency as high as 1 khz easy operation monitoring with bright led indicator wide operating voltage range (5 to 24 vdc) makes smooth connection of the photomicrosensor with ttls, relays, and programmable controllers (plc) possible ordering information appearance sensing method slot width slot depth output configuration weight part number standard transmissive 5mm 9mm light-on approx. 3.1 g ee-sx470 ee-sx470p light-on/dark-on* ee-sx670 ee-sx670p l-shaped light-on approx. 3.0 g ee-sx471 ee-sx471p light-on/dark-on* g ee-sx671 ee-sx671p t-shaped light-on approx. 2.4 g ee-sx472 ee-sx472p light-on/dark-on* ee-sx672 ee-sx672p *the ee-sx67 series models can be used as light-on models when the l terminal and positive (+) terminal are short-circuited. to use them as dark-on models do not short-circuit these terminals. connector ee-1001-1 can be used for light-on operation. (this table continues on the next page.)
ee-sx470/471/472/473/474/670/671/672/673/674(p) ee-sx470/471/472/473/474/670/671/672/673/674(p) ordering information table -- continued from previous page appearance sensing method slot width slot depth output configuration weight part number close-mounting transmissive 5mm 9mm light-on approx. 2.3 g ee-sx473 ee-sx473p light-on/dark-on* ee-sx673 ee-sx673p close-mounting light-on approx. 3.0 g ee-sx474 ee-sx474p light-on/dark-on ee-sx674 EE-SX674P *the ee-sx67 series models can be used as light-on models when the l terminal and positive (+) terminal are short-circuited. to use them as dark-on models do not short-circuit these terminals. connector ee-1001-1 can be used for light-on operation. specifications ratings item standard l-shaped t-shaped close-mounting npn output ee-sx470 ee-sx670 ee-sx471 ee-sx671 ee-sx472 ee-sx672 ee-sx473, ee-sx474 ee-sx673, ee-sx674 pnp output ee-sx470p ee-sx670p ee-sx471p ee-sx671p ee-sx472p ee-sx672p ee-sx473p, ee-sx474p ee-sx673p, ee-sx474p supply voltage 5to24vdc 10%, ripple (p-p): 10% max. current consumption npn models: 35 ma max., pnp models: 30 ma max. standard reference object opaque: 0.8 x 2 mm differential distance 0.025 mm control output npn open collector output models: at 5 to 24 vdc: 100 ma load current (l c ) with a residual voltage of 0.8 v max. when driving ttl: 40 ma load current (l c ) with a residual voltage of 0.4 v max. pnp open collector output models: at 5 to 24 vdc: 50 ma load current (l c ) with a residual voltage of 1.3 v max. indicator* without detecting object on with detecting object off response frequency** 1 khz max. (3 khz typ.) light source gaas infrared led with a peak wavelength of 940 nm receiver si phototransistor with a sensing wavelength of 850 nm max. connecting method ee-1001/1006 connectors; soldering terminals *the indicator is gap red led (peak emission wavelength: 690 nm). **the response frequency was measured by detecting the following disks rotating. disk 2.1 mm 1mm 1mm t=0.2mm
ee-sx470/471/472/473/474/670/671/672/673/674(p) ee-sx470/471/472/473/474/670/671/672/673/674(p) characteristics ambient illumination* fluorescent light: 1,000 xmax. ambient temperature operating -25 cto55 c (-13 f to 131 f) storage -30 cto80 c (-22 f to 176 f) ambient humidity operating 5% to 85% y storage 5% to 95% vibration resistance destruction: 20 to 2,000 hz, (with a peak acceleration of 10 g), 1.5-mm double amplitude for 2 hrs (with 4-minute cycles) each in x, y, and z directions shock resistance destruction: 500 m/s 2 (approx. 50g) for 3 times each in x, y, and z directions soldering heat resistance** 260 5 c when the portion between the tip of the terminals and the position 1.5 mm from the terminal base is dipped into the solder for 10 1 seconds degree of protection iec 60529, ip50 materials case polybutylene phthalate (pbt) cover polycarbonate (pc) emitter/receiver polycarbonate (pc) *the ambient luminance is measured on the surface of the receiver. **this conforms to mil-std-750-2031-1. en g ineerin g data sensing position characteristics (typical) tr on tr off dark-on mode distance d (mm) tr on tr off dark-on mode distance d (mm) repeated sensing position characteristics (typical) no. of repetitions: 20 at v cc =12v distance d (mm) output level transistor d1 = 0.002 mm d2 = 0.004 mm d3 = 0.005 mm d4 = 0.02 mm d5 = 0.04 mm d d
ee-sx470/471/472/473/474/670/671/672/673/674(p) ee-sx470/471/472/473/474/670/671/672/673/674(p) operation output configuration model output transistor operation timing charts output circuit npn output ee-sx670 ee-sx671 ee-sx672 ee-sx673 ee-sx674 light-on incident interrupted on off operation indicator (red) on off output transistor operates releases load 1 (relay) h l load 2 (when terminals l and are short circuited operation indicator (red) load 1 (relay) main circuit out 5to24vdc l i c r l (see note.) dark-on incident interrupted on off operation indicator (red) on off output transistor operates releases load 1 (relay) h l load 2 c i r c u i t load 2 0v note: when using a voltage output, always insert a resistor in r l . ee-sx470 ee-sx471 ee-sx472 ee-sx473 ee-sx474 light-on incident interrupted on off operation indicator (red) on off output transistor operates releases load 1 (relay) h l load 2 operation indicator (red) load 1 (relay) main circuit load 2 out 5to24vdc 0v i c note: when using a voltage output, always insert a resistor in r l . r l (see note.) pnp output ee-sx670p ee-sx671p ee-sx672p ee-sx673p EE-SX674P light-on incident interrupted on off operation indicator (red) on off output transistor operates releases load (relay) h l voltage output (when terminals l and are short circuited) operation indicator (red) main circuit l d out 5to24vdc l i c r l (see note.) dark-on incident interrupted on off operation indicator (red) on off output transistor operates releases load 1 (relay) h l load 2 load 0v r l note: when using a voltage output, always insert a resistor in r l . ee-sx470p ee-sx471p ee-sx472p ee-sx473p ee-sx474p light-on incident interrupted on off operation indicator (red) on off output transistor operates releases load (relay) h l voltage output operation indicator (red) main circuit load out 5to24vdc 0v i c r l note: when using a voltage output, always insert a resistor in r l . (see note.)
ee-sx470/471/472/473/474/670/671/672/673/674(p) ee-sx470/471/472/473/474/670/671/672/673/674(p) dimensions unit: mm (inch) ee-sx470(p), ee-sx670(p) two, 3.2 dia. holes four, r1 optical axis (1) (2) (3)(4) two, 3.8 dia. holes indicator window terminal arrangement (1) (2) (3) (4) v cc l out l(seenote.) output gnd (0 v) 25.4 (1.00) 19 (0.75) 6.95 (0.27) 6.4 (0.25) 13.4 (0.53) 0.8(0.03) 5 (0.20) 19 (0.75) 2 (0.08) 13.8 (0.54) 0.3 (0.01) 0.7 (0.03) 9 (0.35) 2.54 (0.10) 13.2 (0.52) 5.5(0.22) 3.8 (0.15) 6.2 (0.24) note: l terminal needs no connection for all ee-sx47 series sensors. ee-sx471(p), ee-sx671(p) four, r1.0 indicator window optical axis two, 3.2 dia. holes four, r2 (1) (2) (3)(4) note: l terminal needs no connection for all ee-sx47 series sensors. terminal arrangement (1) (2) (3) (4) v cc l out l(seenote.) output gnd (0 v) 26.2 (1.03) 3.0(0.12) 3.2(0.13) 19.0 (0.75) 6.2 (0.24) 9.0 (0.35) 5.0 (0.20) 14.5 (0.57) 7.2 (0.28) 6.20 (0.24) 13.4 (0.53) 3.8 (0.15) 2.54 (0.10) 13.0 (0.51) 9.0 (0.35) 2.1(0.08) 6.35 (0.25) 15.5 (0.61) 2(0.08) 0.8 (0.03) 3.6 (0.14) 7.2 (0.28) 13.0 (0.51) 13.4 (0.53) 19.0 (0.75) 0.7 (0.03) 0.3(0.01) 0.6 (0.02) 6.95 (0.27) 8.3 (0.33)
ee-sx470/471/472/473/474/670/671/672/673/674(p) ee-sx470/471/472/473/474/670/671/672/673/674(p) ee-sx472(p), ee-sx672(p) indicator window operation (back) optical axis 4-r1.6 4-r1.0 terminal arrangement (1) (2) (3) (4) v cc l out l(seenote.) output gnd (0 v) 13.7 (0.54) 2.54 (0.10) 3.0 (0.12) 2.9 (0.11) 3.8 (0.15) 0.2 (0.01) 6.2 (0.24) 5.0 (0.20) 22.2 (0.87) 13.4 (0.53) 9.0 (0.35) 26.0 (1.02) 6.4 (0.25) 12.6 (0.50) 4.3 (0.17) 13 (0.51) 0.8 (0.03) 19.0 (0.75) 6.3 (0.25) 2 (0.08) 0.7 (0.03) 6.2 (0.24) 0.3 (0.01) 0.1 (0.004) 0.1 (0.004) note: l terminal needs no connection for all ee-sx47 series sensors. ee-sx473(p), ee-sx673(p) two, r1 two, 3.2 dia. holes (1) (2)(3)(4) optical axis indicator window terminal arrangement (1) (2) (3) (4) v cc l out l(seenote.) output gnd (0 v) 2.54 (0.10) 3.8 (0.15) 6.2 (0.24) 5 (0.20) 22.2 (0.87) 13.4 (0.53) 9 (0.35) 0.8 (0.03) 2 (0.08) 0.7 (0.03) 0.3 (0.01) 6.65 (0.26) 7 (0.28) 14.4 (0.57) 2.8(0.11) 4.9(0.19) 6.3 (0.25) 12.8 (0.50) 3.5(0.14) note: l terminal needs no connection for all ee-sx47 series sensors.
ee-sx470/471/472/473/474/670/671/672/673/674(p) ee-sx470/471/472/473/474/670/671/672/673/674(p) ee-sx474(p), ee-sx674(p) 2--r1 1234 optical axis optical axis mark two 3.5 dia holes light indicator note: l terminal needs no connection for all ee-sx47 series sensors. terminal arrangement (1) (2) (3) (4) v cc l out l(seenote.) output gnd (0 v) 7 (0.28) 2.2 (0.09) 0.3 (0.01) 2.1 (0.08) 0.6 (0.02) 0.7 (0.03) 13.6 (0.54) 9.3 (0.37) 2.9(0.11) 5 (0.20) 13.0 (0.51) 2.54 (0.10) 3 (0.12) 3.8 (0.15) 6.2 (0.24) 21.5 (0.85) 0.8 (0.03) 7 (0.28) 6.2 (0.24) 2.6(0.10) 15.5 (0.61) 0.1 (0.004) ee-1001 connector ee-sx67 (p) with ee-1001 connector 2.54 0.15 2.9 1 13.0 (0.51) 6.0 (0.24) 10.8 (0.43) 22.2 (0.87) 0.6 (0.02) 6.0 (0.24) 10.8 (0.43) 4.0 (0.16) ee-1006 connector with cable (1) (2) (3) (4) note: older standard colors are shown in parentheses. connector comes with a 2-m attached cable. terminal arrangement -- iec colors (1) (2) (3) (4) brown (red) pink (yellow) black (white) blue (black) l out vcc output l gnd (o v) 2.54 (0.10) 0.6 (0.02) 11.8 (0.46) 25 (0.98) 2,000 (78.74) 20 (0.79) 16.2 (0.64) 5.3 (0.21) 15 (0.59)
ee-sx470/471/472/473/474/670/671/672/673/674(p) ee-sx470/471/472/473/474/670/671/672/673/674(p) ee-1006a connector holder r3 four, r2 four, r1.6 (r1) 21.9 (0.86) 25.2 (0.99) 1.2 (0.05) 5.5 (0.22) 2 (0.08) 15 (0.59) 19.4 (0.76) 10.2 (0.40) 3 (0.12) 2.1(0.08) 3.6 (0.14) 3.4 (0.13) 3.2 (0.13) 12 (0.47) 19 (0.75) 3(0.12) p recaut i ons refer to the the technical information section for general precautions. the sensing window is made of a polycarbonate resin which withstands chloride solvents and strong acids but is soluble in strong alkali, aromatic hydrocarbons, and aliphatic hydrocarbonate chloride solvents. the casing material uses a pbt resin which withstands chemicals and oil but is soluble in strong acid or alkali solvents. the temperature of the terminals at the time of soldering must not exceed the following: item temperature permissible time remarks dip 260 c 10 sec the portion be- tween the base of the terminals and t h e p o s i t i o n 1 5 iron 350 c 3sec t h e pos i t i on 1 . 5 mm from the ter- minal base must not be soldered. the terminal base uses a polycarbonate resin, which could be deformed by excessive soldering heat. cat. no. eo5dax4 1/99 specifications subject to change without notice. printed in u.s.a. omron electronics, inc. oneeastcommercedrive schaumburg, il 60173 note: dimensions shown are in millimeters. to convert millimeters to inches divide by 25.4. 1-800-55-omron omron canada, inc. 885 milner avenue scarborough, ontario m1b 5v 8 416-286-6465
|
