dimensions in mm (inches). general specifications number of contacts 3, 4, 7 contact spacing 1.0mm (.039") current rating 0.5 amps dielectric withstanding voltage 500 vac r.m.s. (for one minute) insulation resistance 100 megohms min. contact resistance 45 milliohms max. operating temperature -20 c to +60 c applicable wire sizes #24 to #30 awg (note 1) durability 5,000 cycles materials and finishes card side description materials/finishes contact copper alloy connecting area: gold flash over ni-pd terminal area: tin plating insulator glass-filled pps (ul94v-0, black) cable side contact copper alloy connecting area: gold flash over ni-pd terminal area: tin plating base insulator 6-6 nylon (ul94v-0, black) cover insulator glass-filled pbt (ul94v-0, black) rx03a series connectors 1.0mm (.039") contact spacing, pcmcia modem i/o connectors features ? pcmcia type ii card compatible ? tactile friction lock mechanism ? high reliability contact design ? both idc and solder type terminations available for cable side ? refer to rx03 series for emi/rfi shielded configurations ? ? ? ? ? ? ? ? ? ? ? ? ? ? the rx03a series connectors conform to pcmcia open systems standards for i/o connectors used in modem pc cards with an internal daa. card side connectors are available in 4 and 7 positions. cable side connectors are available in 3, 4, and 7 positions. the 7 position card connector will accept the single 7 position cable connector or either the 3 or 4 position cable connectors. this feature permits varied cable connection options. rx03a C * * C ** ** series no. of contacts cable side: 3, 4, 7 card side: 4, 7 connector type s C cable side p C card side termination cable side: pi C idc ui C solder card side: f1 C smt, offset 0.4mm (.016") f2 C smt, offset 0.85mm (.033") f4 C smt, offset 0.6mm (.024") (*note 1) cover insulator (cable side) blank C provided (standard) cl C no cover insulator provided ordering information *note 1: please consult jae for 7 contacts. dimensions and specifications subject to change without notice. note 1: #28 awg or equivalent for idc type. connector profile (ref.) 17
|