shielded inductors - axial ctparts.com ver. 8.3 manufacturer of inductors, chokes, coils, beads, transformers & toroids 800-684-5322 inside us 949-453-1811 outside us copyright ? 2003 by ct magnetics, dba central technologies. all rights reserved. ct magnetics reserves the right to make improvements or change specifications without notice central technologies 172 07.10.03 size a b c 22 awg max. max. typ. mm 11.4 0.25 3.81 0.25 29.2 0.6430 inches 0.45 0.010 0.15 0.010 1.15 0.02535 physical dimensions specifications l test q q test srf dcr rated part inductance freq. factor freq. min. max. dc number (h) (mhz) min. (mhz) (mhz) ( ? ? ) (ma) cts5-1r0_ 1.0 7.9 55 7.9 200 .05 2200 cts5-2r5_ 2.5 7.9 45 7.9 115 .08 1700 cts5-5r0_ 5.0 7.9 35 7.9 90 .12 1400 cts5-100_ 10 2.5 65 2.5 55 .42 770 cts5-250_ 25 2.5 55 2.5 35 .80 560 cts5-500_ 50 2.5 60 2.5 27 1.50 400 cts5-101_ 100 2.5 70 2.5 20 3.10 280 cts5 series from 1 h to 100 h not shown at actual size. characteristics description: axial leaded molded (shielded) inductor applications: used for high reliability applications. vital for telecommunication applications. ideal for various rf applications operating temperature: -55c to +105c inductance tolerance: 5% & 10% testing: inductance and q are tested on an hp4285a at specified frequency packaging: bulk pack, 500 parts per bag, tape & reel, 2,500 parts per reel current rating: based on .33 watt power dissipation for approximately 20c temperature rise marking: printed with part value testing: inductance is measured on an hp4285a at 1 khz leads: soft copper and pre-tinned additional information: additional electrical & physical information available upon request samples available. see website for ordering information. please specify tolerance code when ordering. cts5-1r0_ j = 5%, k = 10%
|