u.s. cage code 06324 ipt se series bayonet lock connectors www.glenair.com e-mail: sales@glenair.com a-14 glenair, inc. ? 1211 air way ? glendale, ca 91201-2497 ? 818-247-6000 ? fax 818-500-9912 ? 2008 glenair, inc. printed in u.s.a. ipt 00 se...sr front panel mount square flange receptacle with backshell, cable cla mp and bushing application notes 1. front panel mount square fange receptacle with cable clamp and bushing for cable protection; through mounting holes. 2. connector class se (crimp contact/environmental) CCwire sealing grommet supplied. 3. standard materials confguration consists of aluminum alloy with stainless steel coupling pins. 4. standard contact material consists of copper alloy with gold plating over nickel. 5. a broad range of other front and rear connector accessories are available. see our website and/or contact factory for complete information. 6. standard insert is high insulation synthetic rubber. ipt 00 se 18-11 s z sr xx mil-c-26482 series l type 00 - front panel mount square flange receptacle connector class se - crimp contact/environmental shell size and insert arrangements mod code options see table ii cable clamp with bushing alternate insert rotation (w, x, y, z) omit for normal contact gender p - pin s - socket l2 l3 l1 d3 h b e d1 d2
u.s. cage code 06324 ipt se series bayonet lock connectors www.glenair.com e-mail: sales@glenair.com a-15 glenair, inc. ? 1211 air way ? glendale, ca 91201-2497 ? 818-247-6000 ? fax 818-500-9912 ? 2008 glenair, inc. printed in u.s.a. table i: dimensions shell size b max. d1 max. d2 min. d3 + 0.3 - 0.7 e 0.15 h max. l1 max. l2 + 0.8 - 0 l3 max. max. weight in grams 8 21.03 15.44 2.9 3.2 15.08 21.1 61.5 10.94 2.0 20 10 24.23 18.64 2.9 4.8 18.26 22.7 61.5 10.94 2.0 22 12 26.59 27.79 2.9 7.9 20.62 25.9 61.5 10.94 2.0 29 14 28.98 25.00 2.9 9.5 23.01 29.0 61.5 10.94 2.0 40 16 31.34 28.19 2.9 12.7 24.61 30.6 64.4 10.94 2.0 51 18 33.73 31.34 2.9 15.9 26.97 37.4 64.4 10.94 2.0 62 20 36.90 34.54 2.9 15.9 29.36 37.4 71.1 14.12 2.8 70 22 40.08 37.69 2.9 19.1 31.75 42.1 71.1 14.12 2.8 75 24 43.25 40.89 3.6 20.3 34.92 44.5 73.6 14.96 2.8 87 table ii: modification codes shell finish (omit for standard cad/olive drab finish) assembly with accessories (omit for standard version) f2 - bright nickel plating (rohs) key polarization (omit for n version) w, x, y, z = alternates f6 - black electrodeposited paint (rohs) n0 - connector less backshell f7 - black zn-co plating (rohs) gxxx - custom designed connector f8 - olive drab zn-co plating ipt 00 se...sr front panel mount square flange receptacle with backshell, cable cla mp and bushing standard finishes (for qq-a-591 aluminum shells) requirements iaw rohs not iaw rohs f2 electrolytic nickel f6 black non conductive f7 black conductive g3 cadmium with olive drab passivation f8 zinc cobalt with olive drab passivation thermal shock -40c + 100c -55c + 125c -55c + 125c -55c + 125c -40c + 100c salt spray after thermal shock 24 hour 500 hour 500 hour 500 hour 200 hour electical conductivity very good no very good very good good abrasion resistance very good very good good very good good
|
