spec no: dsaa5264 rev no: v.7 date:nov/28/2005 page: 1 of 4 approved: j. lu checked: joe lee drawn:f.li erp: 1301000190 38mm (1.5inch) single digit numeric display features z 1.5 inch digit height. z low current operation. z excellent character appearance. z high light output. z easy mounting on p.c. boards or sockets. z i.c. compatible. z multicolor available. z mechanically rugged. z standard : gray face, white segment. z rohs compliant. package dimensions & internal circuit diagram notes: 1. all dimensions are in millimeters (inches), tolerance is 0.25(0.01")unless otherwise noted. 2. specifications are subject to change without notice. description the high efficiency red source color devices are made with gallium arsenide phosphide on gallium phosphide orange light emitting diode. p/n: sa15 - 11ewa high efficiency re d
spec no: dsaa5264 rev no: v.7 date:nov/28/2005 page: 2 of 4 approved: j. lu checked: joe lee drawn:f.li erp: 1301000190 selection guid e part no. dice lens type iv (ucd) @ 10ma min. typ. sa15 - 11ewa high efficiency red (gaasp/gap) white diffused 3000 16000 common anode,rt. hand decimal. description electrical / optical characteristics at t a =25 c absolute maximum ratings at t a =25 c notes: 1. 1/10 duty cycle, 0.1ms pulse width. 2. 2mm below package base. parameter high efficiency red units power dissipation per segment or dp) 150(105) mw dc forward current per segment or dp) 30(30) ma peak forward current [1] per segment or dp) 160(160) ma reverse voltage per segment or dp) 10(5) v operating/storage temperature - 40c to +85c lead solder temperature [2] 260c for 5 seconds symbol parameter device typ. max. test conditions units peak peak wavelength high efficiency red 627 nm i f =20ma d dominant wavelength high efficiency red 625 nm i f =20ma ? 1/2 spectral line half - width high efficiency red 45 nm i f =20ma c capacitance high efficiency red 15 pf v f =0v;f=1mhz v f forward voltage per segment or dp) high efficiency red 4.0 (2.0) 5.0 (2.5) v i f =20ma i r reverse current per segment or dp) high efficiency red 10 (10) ua v r = 10v (v r = 5v)
spec no: dsaa5264 rev no: v.7 date:nov/28/2005 page: 3 of 4 approved: j. lu checked: joe lee drawn:f.li erp: 1301000190 high efficiency red sa15 - 11ewa
spec no: dsaa5264 rev no: v.7 date:nov/28/2005 page: 4 of 4 approved: j. lu checked: joe lee drawn:f.li erp: 1301000190 packing & label specifications sa15 - 11ewa remarks: if special sorting is required (e.g. binning based on forward voltage, luminous intensity/ luminous flux or wavelength), the typical accuracy of the sorting process is as follows: 1. wavelength: +/ - 1nm 2. luminous intensity/ luminous flux: +/ - 15% 3. forward voltage: +/ - 0.1v note: accuracy may depend on the sorting parameters.
|
