1 souriau 851 for industry applications ?test and measurement in harsh environment ?process control - factory automation ?instrumentation characteristics mechanical ?aluminium alloy shells with five keyways ?neopren inserts ?quick bayonet coupling 3 stainless steel pins ?copper alloy contacts, machined or stamped and formed ?plating : gold on active part ?mechanical endurance : 500 mating/unmating cycles ?retention force : - awg 16 machined contacts : 110 n - awg 20 machined contacts : 0 70 n - awg 16 formed contacts : 0 80 n - awg 20 formed contacts : 0 50 n electrical ?withstanding voltage : 1500 vms ?contact resistance : < 10 mohms ?current rating per contact : - awg 8 machined contacts : 46 amps - awg 12 machined contacts : 23 amps - awg 16 machined contacts : 13 amps - awg 16 formed contacts : 10 amps - awg 20 machined contacts : 7.5 amps - awg 20 formed contacts : 5 amps ?shielding : 60 db - 100 khz climatic ?working temperature : -40? to +120? (regarding backshell configurations) ?sealing : - interfacial seal always integrated into receptacle housing - ip67 : connector + anti-decoupling sealing gland system - ip65 : connector + sealing gland + cable clamp ?resistance to salt spray : 48 hours ?resistance to damp heat : 21 days features meets dimensional and technical requirements of mil-c 26482 series 1 ?aluminium alloy shells ?quick bayonet coupling ?five keyways ?pin inserts recessed in outer shell ?from 3 to 41 contacts per insert machined or stamped and formed contacts ?plating : nickel ?interfacial seal integrated into receptacle housings ?sealed backshells shielded plug and grounding washers for shielded braid backshells in accordance with major industrial standards benefits intermateable with all mil-c 26482 series 1 connectors without need for design change ruggerized connector with compact size and lightweight ?safe connection avoiding wrong mating and short circuiting large choice of contacts and layouts including signal and power contacts environment-friendly plating (cadmium- free) ?high sealing performance : up to ip67 ?emc protection description ?quick bayonet - coupling ?five keyways ?machined or stamped and formed contacts standards derived from mil-c 26482 series 1
souriau 851 for industr y 2 contact inser t layouts n.b.: solder contacts are included with connector shells. crimp contacts have to be ordered separately. * consult fci for availability crimp contacts male female 20 1 1.20 min 2.10 max 0.21 min 0.93 max cf16pc10rf stamped & formed screw machined cf10pc10rf cf10sc10rf male female 16 1.6 2.00 min 3.00 max 0.70 min 1.50 max cf16pc10rf cf16sc10rf male female 20 1 1.20 min 2.10 max 0.21 min 0.93 max 8500-697 8500-1758a male female 16 1.6 2.00 min 3.00 max 0.93 min 1.91 max 8500-1300 8500-9331 male female 12 2.4 2.45 min 4.01 max 1.91 min 3.18 max * * male female 8 5.5 5.10 min 5.50 max - 8.98 max * * contact type awg diam. over section part numbers ? (mm) insulation (mm) (mm 2 ) shell size nb of contacts 16 8 16 26 18 4 * 18 11 18 32 shell size nb of contacts 20 16 20 41 awg 20 ? 1 mm awg 16 ? 1.6 mm awg 12 ? 2.4 mm consult fci awg 8 ? 5.5 mm for availability } shell size nb of contacts 10 6 12 3 12 10 14 4* 14 5 14 19 extended gr ound contact-crimp (+ 1 mm) male 16 1.6 2.00 min 3.00 max 0.93 min 1.91 max 8501 9641 master key or keyway of shell
souriau 851 for industr y 3 or dering infor mation - crimp version shell square flange jam nut standard shielded type receptacle receptacle plug plug insert layout n.b. : crimp contacts have to be ordered separately * consult fci for availability male contacts female contacts male contacts female contacts male contacts female contacts male contacts female contacts 10-6 85100d 85100d 85107d 85107d 85106d 85106d 85126d 85126d 10-6 p 10-6 s 10-6 p 10-6 s 10-6 p 10-6 s 10-6 p 10-6 s 12-3 85100d 85100d 85107d 85107d 85106d 85106d 85126d 85126d 12-3 p 12-3 s 12-3 p 12-3 s 12-3 p 12-3 s 12-3 p 12-3 s 12-10 85100d 85100d 85107d 85107d 85106d 85106d 85126d 85126d 12-10 p 12-10 s 12-10 p 12-10 s 12-10 p 12-10 s 12-10 p 12-10 s 14-4 * * * * * * * * 14-5 85100d 85100d 85107d 85107d 85106d 85106d 85126d 85126d 14-5 p 14-5 s 14-5 p 14-5 s 14-5 p 14-5 s 14-5 p 14-5 s 14-19 85100d 85100d 85107d 85107d 85106d 85106d 85126d 85126d 14-19 p 14-19 s 14-19 p 14-19 s 14-19 p 14-19 s 14-19 p 14-19 s 16-8 85100d 85100d 85107d 85107d 85106d 85106d 85126d 85126d 16-8 p 16-8 s 16-8 p 16-8 s 16-8 p 16-8 s 16-8 p 16-8 s 16-26 85100d 85100d 85107d 85107d 85106d 85106d 85126d 85126d 16-26 p 16-26 s 16-26 p 16-26 s 16-26 p 16-26 s 16-26 p 16-26 s 18-4 * * * * * * * * 18-11 85100d 85100d 85107d 85107d 85106d 85106d 85126d 85126d 18-11 p 18-11 s 18-11 p 18-11 s 18-11 p 18-11 s 18-11 p 18-11 s 18-32 85100d 85100d 85107d 85107d 85106d 85106d 85126d 85126d 18-32 p 18-32 s 18-32 p 18-32 s 18-32 p 18-32 s 18-32 p 18-32 s 20-16 85100d 85100d 85107d 85107d 85106d 85106d 85126d 85126d 20-16 p 20-16 s 20-16 p 20-16 s 20-16 p 20-16 s 20-16 p 20-16 s 20-41 85100d 85100d 85107d 85107d 85106d 85106d 85126d 85126d 20-41 p 20-41 s 20-41 p 20-41 s 20-41 p 20-41 s 20-41 p 20-41 s
souriau 851 for industr y 4 or dering infor mation - solder version shell square flange jam nut standard shielded type receptacle receptacle plug plug insert layout n.b. : solder contacts are included with connector shells * consult fci for availability male contacts female contacts male contacts female contacts male contacts female contacts male contacts female contacts 10-6 85100b 85100b 85107b 85107b 85106b 85106b 85126b 85126b 10-6 p 10-6 s 10-6 p 10-6 s 10-6 p 10-6 s 10-6 p 10-6 s 12-3 85100b 85100b 85107b 85107b 85106b 85106b 85126b 85126b 12-3 p 12-3 s 12-3 p 12-3 s 12-3 p 12-3 s 12-3 p 12-3 s 12-10 85100b 85100b 85107b 85107b 85106b 85106b 85126b 85126b 12-10 p 12-10 s 12-10 p 12-10 s 12-10 p 12-10 s 12-10 p 12-10 s 14-4 * * * * * * * * 14-5 85100b 85100b 85107b 85107b 85106b 85106b 85126b 85126b 14-5 p 14-5 s 14-5 p 14-5 s 14-5 p 14-5 s 14-5 p 14-5 s 14-19 85100b 85100b 85107b 85107b 85106b 85106b 85126b 85126b 14-19 p 14-19 s 14-19 p 14-19 s 14-19 p 14-19 s 14-19 p 14-19 s 16-8 85100b 85100b 85107b 85107b 85106b 85106b 85126b 85126b 16-8 p 16-8 s 16-8 p 16-8 s 16-8 p 16-8 s 16-8 p 16-8 s 16-26 85100b 85100b 85107b 85107b 85106b 85106b 85126b 85126b 16-26 p 16-26 s 16-26 p 16-26 s 16-26 p 16-26 s 16-26 p 16-26 s 18-4 * * * * * * * * 18-11 85100b 85100b 85107b 85107b 85106b 85106b 85126b 85126b 18-11 p 18-11 s 18-11 p 18-11 s 18-11 p 18-11 s 18-11 p 18-11 s 18-32 85100b 85100b 85107b 85107b 85106b 85106b 85126b 85126b 18-32 p 18-32 s 18-32 p 18-32 s 18-32 p 18-32 s 18-32 p 18-32 s 20-16 85100b 85100b 85107b 85107b 85106b 85106b 85126b 85126b 20-16 p 20-16 s 20-16 p 20-16 s 20-16 p 20-16 s 20-16 p 20-16 s 20-41 85100b 85100b 85107b 85107b 85106b 85106b 85126b 85126b 20-41 p 20-41 s 20-41 p 20-41 s 20-41 p 20-41 s 20-41 p 20-41 s
souriau 851 for industr y 5 or dering infor mation backshells for plug or squar e flange r eceptacle pg adaptor for standard accessories material : aluminium cable clamp with sealing gland - ip65 material : aluminium + thermoplastic anti-decoupling sealing gland - ip67 material : aluminium + thermoplastic adaptor for flexible conduit - ip65 material : thermoplastic cable clamp material : thermoplastic 10 851 a10 12 851 a12 14 851 a14 16 851 a16 18 851 a18 20 851 a20 10 851 b10 12 851 b12 14 851 b14 16 851 b16 18 851 b18 20 851 b20 10 851 c10 12 851 c12 14 851 c14 16 851 c16 18 851 c18 20 851 c20 10 851 d10 12 851 d12 14 851 d14 16 851 d16 18 851 d18 20 851 d20 10 851 f10 12 851 f12 14 851 f14 16 851 f16 18 851 f18 20 851 f20 shell size part numbers
souriau 851 for industr y 6 gr ounding washers for shielded braid dimensions (mm) shell size part numbers 10 8501-1250 12 8501-1251 14 8501-1252 16 8501-1253 18 8501-1254 20 8501-1255 square flange receptacle jam nut receptacle plug 10 12 14 16 18 20 a1 crimp 26.5 26.5 26.5 26.5 26.5 27.7 solder 25.1 25.1 25.1 25.1 25.1 26.7 a2 crimp 26.5 26.5 26.5 26.5 26.5 27.7 solder 25.1 25.1 25.1 25.1 25.1 26.7 a3 crimp 26.5 26.5 26.5 26.5 26.5 27.7 solder 25.1 25.1 25.1 25.1 25.1 26.7 e1 crimp 15.0 19.1 22.3 25.4 28.6 31.8 solder e2 crimp 15.0 19.1 22.3 25.4 28.6 31.8 solder c3 crimp 16.0 16.0 16.0 16.0 16.0 17.5 solder e3 crimp 21.8 26.2 29.4 32.5 35.2 38.9 solder c2 crimp 2.64 2.64 2.64 2.64 2.64 3.44 solder d2 crimp 17.9 17.9 17.9 17.9 17.9 22.5 solder c1 crimp 1.3 1.3 1.3 1.3 1.3 2.2 solder d1 crimp 11.7 11.7 11.7 11.7 11.7 14.4 solder b1 crimp 9/16 11/16 13/16 15/16 1?/16 1?/16 class 2b solder 24 unef 24 unef 20 unef 20 unef 18 unef 18 unef b3 crimp 9/16 11/16 13/16 15/16 1?/16 1?/16 solder 24 unef 24 unef 20 unef 20 unef 18 unef 18 unef b2 crimp 10.1 13.0 16.2 19.3 21.6 24.8 solder - - - - - - class 2b
souriau 851 for industr y 7 mated and unmated connectors with backshells unmated plug mated plug pg adaptor cable clamp with sealing gland anti-decoupling sealing gland adaptor for flexible conduit cable clamp dimensions (mm) 10 12 14 16 18 20 lda lva 46.1 49.5 46.1 49.5 56.1 59.5 56.1 59.5 56.1 59.5 57.7 62.2 ldb lvb 68.1 71.5 70.6 74.0 79.6 83.0 82.6 86.0 89.6 92.6 98.8 103.3 ldc lvc 69.1 72.1 71.1 74.5 84.1 87.5 85.1 88.5 85.1 88.5 88.7 93.2 ldd lvd 52.3 55.7 59.7 63.1 64.7 68.1 55.3 58.7 54.3 57.7 67.2 71.7 ldf lvf 56.3 59.6 56.3 59.6 62.1 65.5 62.1 65.5 66.1 69.5 71.1 75.5 cable acceptance (mm) 10 12 14 16 18 20 g thread pg 9 pg 11 pg 13.5 pg 21 min h max 8 10 10 12 12 14 17 19 min j max 4 8 5 10 6 12 13 18 k pma flex 10 23 min l max - 8.7 - 17 - 19 - 21 pg 16 14 16 10 14 17 - 12.8 12
souriau 851 for industr y 8 10 851-10a 12 851-12a 14 851-14a 16 851-16a 18 851-18a 20 851-20a receptacle cap sealed - ip65 panel gasket for squar e flange r eceptacle material : thermoplastic 10 8500-276 12 8500-277 14 8500-278 16 8500-283 18 8500-279 20 8500-280 material : neopren crimping tool panel cut-out type i : machined contacts square flange receptacle jam nut receptacle type ii : machined contacts type iii : stamped & formed contacts 8465 y16scm 8365 + locator 8365-02 nb : square flange receptacle can be either front or rear mounted 10 12 14 16 18 20 a1 18.8 22.2 25.3 28.5 31.7 34.8 b1 18.3 20.6 23.0 24.6 27.0 29.4 c1 3.2 d1 2.5 a2 17.8 22.5 25.7 28.9 32.1 35.2 b2 17.0 21.5 24.2 27.4 30.6 33.7 d2 1.6 min 3.2 max
souriau 851 for industr y 9 w iring instr uctions stripping instr uction this operation should be carried out with great care. use stripping pliers which are designed for use with the size of wire being stripped. in order to maintain the connector? sealing level and cable retention, the wires should have the external sheath dimensions conform to table page 4. recommended conductor loading : - 0 50 % with max diameter wires - 0 50 % with min diameter wires - 100 % with medium size wires. awg 20 ? 1 mm awg 16 ? 1.6 mm stamped & formed contacts l = 4 mm l = 4 mm machined contacts l = 5 mm l = 6 mm crimp contact inser tion ?slide all connector rear accessories over cables and sheath. ? position the crimped contact into the plier jaws, the tip of the jaws butting the contact shoulder (in case of stamped & formed contacts, please ask for a complementary wiring instruction liftet). ? introduce contacts one by one in insert cavities pushing straight in until the contact snaps into position and the clip ensures contact retention. crimp contact extraction ?first dissassemble and slide connector rear accessory over cables and sheath. ?do not operate the tool slide button. ? bring the tool tip over the male or female contact to be removed from connector front (matting face) as far as the first mark f or male contacts and the second mark for female contacts. ? this operation should be carried out delicately in a direction parallel to the contact axis with a light turning action. extrac t contact pushing the slide button fully forward, carefully remove tool and pull wire to release the wire-contact assembly. insertion tools extraction tools awg 16 ? 1.6 awg 20 ? 1 8500 - 38a 8500 - 36a 8500 - 93b recommanded stripping length l
|
