document number: 42092 for technical questions, contact: spresale@vishay.com www.vishay.com revision: 12-mar-09 25 film capacitors high frequency, wrap-and-fill, metallized polypropylene v-730 p vishay sprague features ? excellent ac performance ? low power dissipation ? low dielectric absorption ? close tolerance ? high stability ? compliant to rohs directive 2002/95/ec performance characteristics operating temperature: - 55 c to + 85 c voltage derating : at + 105 c, 50 % of + 85 c rating esr: 20 khz to 100 khz capacitance range: 0.022 f to 10.0 f capactiance tolerance: 20 %, 10 %, 5 % dc voltage rating: 100 wvdc to 630 wvdc ac voltage rating: 70 v rms to 275 v rms , 60 hz to 400 hz dissipation factor: 0.1 % maximum measure all units at 1000 hz, at + 25 c dc voltage test: 200 % of rated voltage for 2 min ac voltage test: 130 % of rated rms voltage at 60 hz for 15 s insulation resistance: measured at 100 wvdc after a 2 min charge. at + 25 c: 200 000 m /f or 400 000 m minimum at + 85 c: 10 000 m /f or 20 000 m minimum at + 105 c: 1000 m /f or 2000 m minimum vibration test (condition b): no mechanical damage, short, open or intermittent circuits. dc life test: 150 % of rated voltage for 1000 h at + 85 c. no open or short circuits. no visible damage. maximum cap 1.0 % minimum ir = 50 % of initial limit maximum df = 0.12 % humidity test: 95 % relative humidity at + 40 c for 250 h. no visible damage. maximum cap 1.0 % minimum ir = 20 % of initial limit maximum df = 0.12 % ac life test: 110 % of rated rms voltage at 60 hz for 1000 h at + 85 c. maximum cap 5 % minimum ir = 50 % of initial limit maximum df = 0.12 % physical characteristics lead pull: 5 lb (2.3 kg) for one min. no physical damage. lead bend: after three complete consecutive bends. no damage. marking: sprague ? trademark, type or part number, capacitance and voltage. note (1) leads to be within 0.062" [1.57 mm] of center line at egress but not less than 0.031" [0.79 mm] from edge. dimensions in inches [millimeters] l 0.062 [1.57] 1.750 [44.45] min. solid tinned w ire (1) 0.032 [0. 8 1] n ominal dia. ( n o. 20 a w g) 1.750 [44.45] min. d max.
v-730 p vishay sprague film capacitors high frequency, wrap-and-fill, metallized polypropylene www.vishay.com for technical questions, contact: spresale@vishay.com document number: 42092 26 revision: 12-mar-09 notes other capacitance values and voltage ratings are available upon request (1) part numbers listed are for a capacitance tole rance of 10 %. to specifiy 20 % tolerance, change the ?x9? in the part numbe r to ?x0?; for 5 %, from ?x9? to ?x5?. (2) the peak current pulse capability ot these capacitors is 10 a/f. the maximum rate voltage change is 10 v/s. standard ratings in inches [millimeters] capacitance (f) part number (1) case size esr (m ) 20 khz to 100 khz maximum ripple current (a rms ) at 20 khz case temperature (2) at d l + 25 c + 35 c + 45 c + 55 c + 65 c + 75 c + 85 c 100 wvdc 0.22 v-730p224x9100 0.275 [7.0] 0.75 [19.0] - 2.3 2.3 2.3 2.3 2.3 1.8 1.0 0.27 v-730p274x9100 0.298 [7.6] 0.75 [19.0] - 2.6 2.6 2.6 2.6 2.4 1.9 1.1 0.33 v-730p334x9100 0.324 [8.2] 0.75 [19.0] - 2.8 2.8 2.8 2.8 2.6 2.2 1.2 0.39 v-730p394x9100 0.347 [8.8] 0.75 [19.0] - 3.1 3.1 3.1 3.1 2.9 2.3 1.3 0.47 v-730p474x9100 0.376 [9.6] 0.75 [19.0] 37.0 3.7 3.4 3.1 2.8 2.5 2.0 1.4 0.56 v-730p564x9100 0.321 [8.2] 1.00 [25.4] 35.0 3.9 3.6 3.3 2.9 2.6 2.1 1.5 0.68 v-730p684x9100 0.348 [8.8] 1.00 [25.4] 33.0 4.1 3.8 3.5 3.1 2.8 2.2 1.6 0.82 v-730p824x9100 0.377 [9.6] 1.00 [25.4] 31.0 4.3 4.0 3.6 3.2 2.9 2.3 1.7 1.0 v-730p105x9100 0.421 [10.7] 1.00 [25.4] 26.0 5.5 5.1 4.7 4.2 3.6 2.8 2.6 1.2 v-730p125x9100 0.454 [11.5] 1.00 [25.4] 24.0 5.7 5.3 4.9 4.4 3.8 3.0 2.8 1.5 v-730p155x9100 0.500 [12.7] 1.00 [25.4] 20.0 6.1 5.5 5.1 4.6 4.0 3.2 3.1 1.8 v-730p185x9100 0.541 [13.7] 1.00 [25.4] 19.0 6.3 5.7 5.3 4.8 4.1 3.4 3.0 2.0 v-730p205x9100 0.486 [12.3] 1.25 [31.8] 18.0 6.5 6.0 5.5 4.9 4.2 3.5 3.2 2.2 v-730p225x9100 0.507 [12.9] 1.25 [31.8] 18.0 6.8 6.3 5.7 5.1 4.4 3.6 3.3 2.7 v-730p275x9100 0.554 [14.1] 1.25 [31.8] 17.0 7.1 6.5 6.0 5.3 4.6 3.7 3.4 3.0 v-730p305x9100 0.581 [14.8] 1.25 [31.8] 16.0 7.3 6.7 6.2 5.5 4.8 3.9 3.5 3.3 v-730p335x9100 0.606 [15.4] 1.25 [31.8] 16.0 7.4 6.8 6.4 5.6 4.9 4.0 3.6 3.9 v-730p395x9100 0.654 [16.6] 1.25 [31.8] 15.0 7.6 6.9 6.6 5.8 5.1 4.1 3.7 4.0 v-730p405x9100 0.537 [13.6] 1.75 [44.5] 15.0 7.8 7.0 6.7 5.9 5.2 4.2 3.8 4.7 v-730p475x9100 0.577 [14.7] 1.75 [44.5] 15.0 8.1 7.4 6.8 6.0 5.3 4.3 3.9 5.0 v-730p505x9100 0.593 [15.1] 1.75 [44.5] 14.0 8.3 7.6 7.0 6.2 5.4 4.4 4.0 5.6 v-730p565x9100 0.624 [15.8] 1.75 [44.5] 14.0 8.4 7.7 7.1 6.4 5.5 4.5 4.1 6.0 v-730p605x9100 0.644 [16.4] 1.75 [44.5] 14.0 8.5 7.8 7.2 6.5 5.6 4.6 4.2 6.8 v-730p685x9100 0.682 [17.3] 1.75 [44.5] 13.0 8.5 8.0 7.4 6.7 5.7 4.7 4.3 8.0 v-730p805x9100 0.735 [18.7] 1.75 [44.5] 13.0 8.6 8.3 7.7 6.8 6.0 4.8 4.4 8.2 v-730p825x9100 0.743 [18.9] 1.75 [44.5] 13.0 8.8 8.6 8.0 7.0 6.1 4.9 4.5 10.0 v-730p106x9100 0.815 [20.7] 1.75 [44.5] 12.0 9.0 9.0 8.5 7.6 6.6 5.4 4.9 250 wvdc 0.1 v-730p104x9250 0.279 [7.1] 0.75 [19.0] - 1.5 1.5 1.5 1.5 1.5 1.5 0.9 0.12 v-730p124x9250 0.300 [7.6] 0.75 [19.0] - 1.9 1.9 1.9 1.9 1.9 1.7 1.1 0.15 v-730p154x9250 0.327 [8.3] 0.75 [19.0] - 2.3 2.3 2.3 2.3 2.3 1.9 1.1 0.18 v-730p184x9250 0.353 [9.0] 0.75 [19.0] - 2.7 2.7 2.7 2.7 2.5 2.0 1.2 0.22 v-730p224x9250 0.306 [7.8] 1.00 [25.4] - 1.9 1.9 1.9 1.9 1.9 1.9 1.3 0.27 v-730p274x9250 0.333 [8.5] 1.00 [25.4] - 2.4 2.4 2.4 2.4 2.4 2.2 1.4 0.33 v-730p334x9250 0.362 [9.2] 1.00 [25.4] - 2.9 2.9 2.9 2.9 2.9 2.3 1.5 0.39 v-730p394x9250 0.389 [9.9] 1.00 [25.4] - 3.4 3.4 3.4 3.2 2.9 2.3 1.6 0.47 v-730p474x9250 0.422 [10.7] 1.00 [25.4] 35.0 3.8 3.7 3.6 3.4 2.9 2.4 1.7 0.56 v-730p564x9250 0.464 [11.8] 1.00 [25.4] 33.0 3.9 3.8 3.7 3.5 3.1 2.5 1.8 0.68 v-730p684x9250 0.425 [10.8] 1.25 [31.8] 32.0 4.0 3.9 3.8 3.7 3.2 2.6 1.9 0.82 v-730p824x9250 0.471 [12.0] 1.25 [31.8] 31.0 4.2 4.1 4.0 3.9 3.4 2.8 2.0 1.0 v-730p105x9250 0.513 [13.0] 1.25 [31.8] 28.0 4.4 4.4 4.4 4.4 4.3 3.5 3.2 1.2 v-730p125x9250 0.554 [14.1] 1.25 [31.8] 27.0 4.7 4.6 4.5 5.0 4.5 3.7 3.3 1.5 v-730p155x9250 0.613 [15.6] 1.25 [31.8] 26.0 5.1 5.0 4.9 5.4 4.7 3.9 3.5 1.8 v-730p185x9250 0.667 [17.0] 1.25 [31.8] 25.0 5.9 5.8 5.7 5.7 5.0 4.1 3.7 2.0 v-730p205x9250 0.700 [17.8] 1.25 [31.8] 21.0 7.2 7.2 6.8 6.0 5.2 4.3 3.9 2.2 v-730p225x9250 0.610 [15.5] 1.75 [44.5] 20.0 8.4 7.5 7.0 6.3 5.4 4.5 4.1 2.7 v-730p275x9250 0.669 [17.0] 1.75 [44.5] 19.0 8.6 7.8 7.3 6.6 5.7 4.7 4.3 3.0 v-730p305x9250 0.703 [17.9] 1.75 [44.5] 18.0 9.0 8.3 7.6 6.8 5.9 4.8 4.4 3.3 v-730p335x9250 0.734 [18.6] 1.75 [44.5] 18.0 9.0 8.4 7.8 7.0 6.0 4.9 4.5 3.9 v-730p395x9250 0.794 [20.2] 1.75 [44.5] 17.0 9.0 8.5 8.0 7.2 6.2 5.0 4.6 4.0 v-730p405x9250 0.803 [20.4] 1.75 [44.5] 16.0 9.0 8.6 8.2 7.4 6.3 5.1 4.7 4.7 v-730p475x9250 0.866 [22.0] 1.75 [44.5] 16.0 9.0 8.8 8.5 7.7 6.6 5.3 4.9 5.0 v-730p505x9250 0.892 [22.7] 1.75 [44.5] 15.0 9.0 9.0 8.8 7.9 6.8 5.6 5.1 5.6 v-730p565x9250 0.941 [23.9] 1.75 [44.5] 15.0 9.0 9.0 8.9 8.0 7.0 5.8 5.3 6.0 v-730p605x9250 0.972 [24.7] 1.75 [44.5] 15.0 9.0 9.0 9.0 8.2 7.2 5.9 5.5 6.8 v-730p685x9250 0.882 [22.4] 2.25 [57.2] 15.0 9.0 9.0 9.0 8.4 7.4 6.0 5.6 8.0 v-730p805x9250 0.953 [24.2] 2.25 [57.2] 14.0 9.0 9.0 9.0 8.7 7.8 6.3 5.8 8.2 v-730p825x9250 0.964 [24.5] 2.25 [57.2] 14.0 9.0 9.0 9.0 8.8 7.9 6.4 5.9 10.0 v-730p106x9250 1.060 [26.9] 2.25 [57.2] 13.0 9.0 9.0 9.0 8.9 8.3 6.8 6.2
document number: 42092 for technical questions, contact: spresale@vishay.com www.vishay.com revision: 12-mar-09 27 v-730 p film capacitors high frequency, wr ap-and-fill, metallized polypropylene vishay sprague notes other capacitance values and voltag e ratings are av ailable on request (1) part numbers listed are for a capacitance tolerance of 10 %. to specifiy 20 % tolerance, change the ?x9? in the part numbe r to ?x0?; for 5 %, from ?x9? to ?x5?. (2) the peak current pulse capability ot these capacitors is 10 a/f. the maximum rate voltage change is 10 v/s. standard ratings in inches [millimeters] capacitance (f) part number (1) case size esr (m ) 20 khz to 100 khz maximum ripple current (a rms ) at 20 khz case temperature (2) at d l + 25 c + 35 c + 45 c + 55 c + 65 c + 75 c + 85 c 400 wvdc 0.047 v-730p473x9400 0.258 [6.6] 0.75 [19.0] - 1.0 1.0 1.0 1.0 1.0 1.0 0.9 0.056 v-730p563x9400 0.275 [7.0] 0.75 [19.0] - 1.1 1.1 1.1 1.1 1.1 1.1 0.9 0.068 v-730p683x9400 0.297 [7.5] 0.75 [19.0] - 1.4 1.4 1.4 1.4 1.4 1.4 1.0 0.082 v-730p823x9400 0.320 [8.1] 0.75 [19.0] - 1.7 1.7 1.7 1.7 1.7 1.6 1.1 0.1 v-730p104x9400 0.348 [8.8] 0.75 [19.0] - 2.0 2.0 2.0 2.0 2.0 1.9 1.3 0.12 v-730p124x9400 0.299 [7.6] 1.00 [25.4] - 1.4 1.4 1.4 1.4 1.4 1.4 1.4 0.15* v-730p154x9400 0.328 [8.3] 1.00 [25.4] - 1.7 1.7 1.7 1.7 1.7 1.7 1.6 0.18 v-730p184x9400 0.353 [9.0] 1.00 [25.4] - 2.1 2.1 2.1 2.1 2.1 2.1 1.7 0.22 v-730p224x9400 0.385 [9.8] 1.00 [25.4] - 2.6 2.6 2.6 2.6 2.6 2.5 1.8 0.27 v-730p274x9400 0.421 [10.7] 1.00 [25.4] - 3.1 3.1 3.1 3.1 3.1 2.7 1.9 0.33 v-730p334x9400 0.469 [11.9] 1.00 [25.4] - 3.8 3.8 3.8 3.8 3.5 2.9 2.0 0.39 v-730p394x9400 0.503 [12.8] 1.00 [25.4] - 4.1 4.1 4.1 4.1 3.7 3.1 2.1 0.47 v-730p474x9400 0.545 [13.8] 1.00 [25.4] 32.0 5.7 5.5 5.0 4.4 3.8 3.2 2.2 0.56 v-730p564x9400 0.506 [12.9] 1.25 [31.8] 31.0 5.7 5.7 5.3 4.4 4.1 3.3 2.3 0.68 v-730p684x9400 0.551 [14.0] 1.25 [31.8] 30.0 5.7 5.7 5.5 4.8 4.3 3.5 2.4 0.82 v-730p824x9400 0.599 [15.2] 1.25 [31.8] 28.0 5.7 5.7 5.6 5.3 4.5 3.7 2.6 1.0 v-730p105x9400 0.655 [16.6] 1.25 [31.8] 27.0 5.7 5.7 5.7 5.7 5.7 4.7 4.3 1.2 v-730p125x9400 0.712 [18.1] 1.25 [31.8] 26.0 6.3 6.2 6.0 5.9 5.8 4.9 4.5 1.5 v-730p155x9400 0.658 [16.7] 1.75 [44.5] 25.0 7.0 6.9 6.7 6.6 6.5 5.2 4.7 1.8 v-730p185x9400 0.716 [18.2] 1.75 [44.5] 23.0 8.0 7.9 7.8 7.7 6.8 5.5 5.0 2.0 v-730p205x9400 0.752 [19.1] 1.75 [44.5] 21.0 9.0 9.0 9.0 8.0 7.0 5.7 5.2 2.2 v-730p225x9400 0.786 [20.0] 1.75 [44.5] 20.0 9.0 9.0 9.0 8.3 7.4 5.9 5.4 2.7 v-730p275x9400 0.865 [22.0] 1.75 [44.5] 19.0 9.0 9.0 9.0 8.6 7.6 6.0 5.6 3.0 v-730p305x9400 0.909 [23.1] 1.75 [44.5] 17.0 9.0 9.0 9.0 9.0 7.9 6.4 5.9 3.3 v-730p335x9400 0.951 [24.2] 1.75 [44.5] 16.0 9.0 9.0 9.0 9.0 8.1 6.6 6.3 3.9 v-730p395x9400 1.031 [26.2] 1.75 [44.5] 15.0 9.0 9.0 9.0 9.0 8.3 6.8 6.5 630 wvdc 0.022 v-730p223x9630 0.283 [7.2] 0.75 [19.0] - 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.027 V-730P273X9630 0.307 [7.8] 0.75 [19.0] - 1.0 1.0 1.0 1.0 1.0 1.0 0.9 0.033 v-730p333x9630 0.334 [8.5] 0.75 [19.0] - 1.2 1.2 1.2 1.2 1.2 1.2 1.0 0.039 v-730p393x9630 0.358 [9.1] 0.75 [19.0] - 1.4 1.4 1.4 1.4 1.4 1.4 1.0 0.047 v-730p473x9630 0.388 [9.9] 0.75 [19.0] - 1.7 1.7 1.7 1.7 1.7 1.6 1.1 0.056 v-730p563x9630 0.418 [10.6] 0.75 [19.0] - 2.1 2.1 2.1 2.1 2.1 1.7 1.2 0.068 v-730p683x9630 0.346 [8.8] 1.00 [25.4] - 1.3 1.3 1.3 1.3 1.3 1.3 1.3 0.082 v-730p823x9630 0.374 [9.5] 1.00 [25.4] - 1.6 1.6 1.6 1.6 1.6 1.6 1.6 0.1 v-730p104x9630 0.408 [10.4] 1.00 [25.4] - 1.9 1.9 1.9 1.9 1.9 1.9 1.6 0.12 v-730p124x9630 0.443 [11.3] 1.00 [25.4] - 2.3 2.3 2.3 2.3 2.3 2.3 1.8 0.15 v-730p154x9630 0.496 [12.6] 1.00 [25.4] - 2.9 2.9 2.9 2.9 2.9 2.9 1.9 0.18 v-730p184x9630 0.538 [13.7] 1.00 [25.4] - 3.5 3.5 3.5 3.5 3.5 2.7 1.9 0.22 v-730p224x9630 0.496 [12.6] 1.25 [31.8] - 2.8 2.8 2.8 2.8 2.8 2.8 2.3 0.27 v-730p274x9630 0.542 [13.8] 1.25 [31.8] - 3.5 3.5 3.5 3.5 3.5 3.3 2.3 0.33 v-730p334x9630 0.593 [15.1] 1.25 [31.8] - 4.3 4.3 4.3 4.3 4.3 3.5 2.4 0.39 v-730p394x9630 0.639 [16.2] 1.25 [31.8] - 5.0 5.0 5.0 5.0 4.6 3.7 2.5 0.47 v-730p474x9630 0.696 [17.7] 1.25 [31.8] 28.0 6.8 6.3 5.8 5.2 4.5 3.6 2.6 0.56 v-730p564x9630 0.608 [15.4] 1.75 [44.5] 26.0 7.4 6.9 6.3 5.6 4.8 4.0 2.8 0.68 v-730p684x9630 0.664 [16.9] 1.75 [44.5] 25.0 7.8 7.2 6.6 5.9 5.1 4.2 2.9 0.82 v-730p824x9630 0.724 [18.4] 1.75 [44.5] 22.0 8.1 7.5 6.9 6.2 5.3 4.3 3.1 1.0 v-730p105x9630 0.794 [20.2] 1.75 [44.5] 18.0 8.6 7.9 7.3 6.5 5.6 4.6 3.6 ordering information v-730p 224 x9 100 type capacitance capacitance tolerance dc voltage rating (3) this is expressed in picofarads. the first two digits are the significant figures. the third is the number of zeros to follow. x0 = 20 % x9 = 10 % x5 = 5 % this is expressed in volts. note (3) at + 85 c, ac rms ratings for frequencies up to and including 400 hz correspond to this table: wvdc 100 250 400 630 rated rms volts 70 175 275 275
legal disclaimer notice www.vishay.com vishay revision: 02-oct-12 1 document number: 91000 disclaimer all product, product specifications and data are subject to change without notice to improve reliability, function or design or otherwise. vishay intertechnology, inc., its affiliates, agents, and employee s, and all persons acting on it s or their behalf (collectivel y, vishay), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any o ther disclosure relating to any product. vishay makes no warranty, repres entation or guarantee regarding the suitabilit y of the products for any particular purpose or the continuing production of any product. to the maximum extent permitted by applicable law, vi shay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation specia l, consequential or incidental damages, and (iii) any and all i mplied warranties, including warra nties of fitness for particular purpose, non-infringement and merchantability. statements regarding the suitability of products for certain type s of applications are based on vishays knowledge of typical requirements that are often placed on vishay products in generic applications. such statements are not binding statements about the suitability of products for a particular application. it is the customers responsib ility to validate that a particu lar product with the properties descri bed in the product specification is suitable fo r use in a particular application. parameters provided in datasheets and/or specification s may vary in different applications an d performance may vary over time. all operating parameters, including typical pa rameters, must be validated for each customer application by the customers technical experts. product specifications do not expand or otherwise modify vish ays terms and condit ions of purchase, including but not limited to the warranty expressed therein. except as expressly indicate d in writing, vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the vi shay product could result in personal injury or death. customers using or selling vishay products not expressly indicated for use in such applications do so at their own risk. pleas e contact authorized vishay personnel to ob tain written terms and conditions regarding products designed for such applications. no license, express or implied, by estoppel or otherwise, to any intellectual prope rty rights is granted by this document or by any conduct of vishay. product names and markings noted herein may be trad emarks of their respective owners. material category policy vishay intertechnology, inc. hereby certi fies that all its products that are id entified as rohs-compliant fulfill the definitions and restrictions defined under directive 2011/65/eu of the euro pean parliament and of the council of june 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment (eee) - recast, unless otherwis e specified as non-compliant. please note that some vishay documentation may still make reference to rohs directive 2002/95/ ec. we confirm that all the products identified as being compliant to directive 2002 /95/ec conform to directive 2011/65/eu. vishay intertechnology, inc. hereby certifi es that all its products that are identified as ha logen-free follow halogen-free requirements as per jedec js709a stan dards. please note that some vishay documentation may still make reference to the iec 61249-2-21 definition. we co nfirm that all the products identified as being compliant to iec 61249-2-21 conform to jedec js709a standards.
|
