b107 3.5mm pitch miniature double row connector for secondary power (product compliant to ul/csa standard) mdf6 series features 1. pitch 3.5mm miniature type this is a space saving miniature connector where the adjacent contact pitch is set to 3.5mm and the opposite length is set to 5mm double-row alignment. 2. current capacity secures 7a despite miniature power connector, the current capacity 7a is secured using the awg no.16 cable. 3. box type header the box type header secures scoop-proof insertion, and perfectly prevents mis-insertion. 4. inner type full lock adopted adopting the inner type full lock which the locking area is not exposed to the outside, the connector can be engaged under the high reliable and stable conditions. applications secondary power units for various equipment mis-insertion protector inner type full lock
rating b108 product specifications current rating ( note1 ) voltage rating awg # 16 : 7a cable size awg # 18 : 6a awg # 20 : 5a awg # 22 : 4a 300v ac storage temperature range storage moisture range operating temperature range operating moisture range -10 to +60 ? ( note3 ) - 40 to 70 % ( note3 ) -30 to +85 ? ( note2 ) - 40 to 80 % ul csa safety standard file no. ul :e52653 csa :lr95109 item specification condition 1. insulation resistance 1000m ohms min 500v dc 2. withstanding voltage no flashover or insulation breakdown. 1500v ac/1 minute 3. contact resistance 30m ohms max 100ma 4. single insertor/extraction force 0.4n(40gf) min., 4.9n(500gf) max. measured at the steel pin with 1.52 0.76 0.002mm 5. vibration no electrical discontinuity of 1s or more frequency: 10 to 55 hz, single amplitude of 0.75 mm, 2 hours in each of the 3 directions. 6. humidity (steady state) contact resistance: 30m ohms max.insulation resistance: 500m ohms min. 96 hours at temperature of 40? and humidity of 90% to 95% 7. temperature cycle contact resistance: 30m ohms max:insulation resistance: 1000m ohms min. (-55 ? : 30 minutes ? 5 to 35 ? : 10 minutes (- 85 ? : 30 minutes ? 5 to 35 ? : 10 minutes) 5 cycles 8. operating life contact resistance: 30m ohms 30 cycles 9. resistance to soldering heat no deformation of components affecting performance. flow: 250? for 10 seconds manual soldering: 300? for 3 seconds rating material product part material treatment remarks crimping socket insulator polyamide resin white (natural) ul94v-0 crimping contact for socket contact phosphor copper tin plating pin header insulator polyamide resin white (natural) ul94v-0 contact brass tin plating current rating voltage rating awg # 16 to # 18 : 6a cable size awg # 20 to # 22 : 4a 30v ac standard value applicant to the ul csa safety standard note 1: the rated current will be changed according to applicable cable sizes. the header rating only is 7a. note 2: includes temperature rise caused by current flow. note 3: the term "storage" refers to products stored for long period of time prior to mounting and use. operating temperature r ange and humidity range covers non conducting condition of installed connectors in storage, shipment or during transportation. ordering information connector contact mdf6 - * ds - 3.5 c qe wr t mdf6 - 1618 - scf qw q applicable cable size 1618 : awg # 16 to # 18 2022 : awg # 20 to # 22 w packaging type scf : socket contact, reel sc : socket contact, bag q series name : mdf 6 w number of contacts : 4 to 20 e connector type ds : double row socket dp : double row pin header r contact pitch : 3.5mm t contact type c : crimping socket dsa: straight dip ds : right angle dip
b109 double row socket socket crimping contact conductor size (wire construction) jacket diameter awg #16 ( 26cores. /0.254mm ) awg #18 ( 34cores. /0.18 mm ) ? 2.5 to ? 2.0mm awg #20 ( 21cores. /0.18 mm ) awg #22 ( 17cores. /0.16 mm ) ? 1.9 to ? 1.5mm applicable cable (tin plating annealed copper wire) applicable cable part number cl no. awg size jacket diameter packaging type quantity mdf6-1618scf 547-0070-0 #16 to #18 2.5 to 2.0 reel 5000 mdf6-1618sc 547-0071-3 bag 100 mdf6-2022scf 547-0072-6 #20 to #22 1.9 to 1.5 reel 5000 mdf6-2022sc 547-0073-9 bag 100 recommended cable strip length ul1061, ul1007 2.7 to 4.4mm note: if other cables are used instead of the applicable cable, please contact hirose sales department. part number cl no. number of contacts abc mdf6- 4ds-3.5c 547-0074-1 4 10.5 8.1 3.5 mdf6- 6ds-3.5c 547-0075-4 6 14.0 11.6 7.0 mdf6- 8ds-3.5c 547-0076-7 8 17.5 15.1 10.5 mdf6-10ds-3.5c 547-0077-0 10 21.0 18.6 14.0 mdf6-12ds-3.5c 547-0078-2 12 24.5 22.1 17.5 mdf6-14ds-3.5c 547-0079-5 14 28.0 25.6 21.0 mdf6-16ds-3.5c 547-0080-4 16 31.5 29.1 24.5 mdf6-18ds-3.5c 547-0081-7 18 35.0 32.6 28.0 mdf6-20ds-3.5c 547-0082-0 20 38.5 36.1 31.5 unit: mm note: a packaging quantity is delivered by the bag unit (100 pcs.). if needed, please order the products per bag. photo: connected state b applicable crimping tool type part number cl no. applicable contact main press unit cm105 901-0005-4 ----------------- applicator ap105-mdf6-1618s 901-4512-4 mdf6-1618scf ap105-mdf6-2022s 901-4513-7 mdf6-2022scf manual crimping tool mdf6-ta1618hc 550-0203-5 mdf6-1618sc mdf6-ta2022hc 550-0204-8 mdf6-2022sc extraction tool df-c-po ( a ) 550-0170-8 mdf6- **** sc ( f ) note: if any trouble has occurred due to other tools, which are not designated by hirose, hirose won't guarantee any products.
b110 note1: a packaging quantity is delivered by the bag unit (100 pcs.). if needed, please order the products per bag. double row pin header: straight type unit: mm part number cl no. mdf6- 4dp-3.5dsa mdf6- 6dp-3.5dsa mdf6- 8dp-3.5dsa mdf6-10dp-3.5dsa mdf6-12dp-3.5dsa mdf6-14dp-3.5dsa mdf6-16dp-3.5dsa mdf6-18dp-3.5dsa mdf6-20dp-3.5dsa 547-0083-2 547-0084-5 547-0085-8 547-0086-0 547-0087-3 547-0088-6 547-0089-9 547-0090-8 547-0091-0 4 6 8 10 12 14 16 18 20 10.5 14 17.5 21 24.5 28 31.5 35 38.5 number of contacts a 3.5 7 10.5 14 17.5 21 24.5 28 31.5 b board hole diameter : ?1.3 applicable board thickness : 1.60.2 +0.1 + 0 note1: a packaging quantity is delivered by the bag unit (100 pcs.). if needed, please order the products per bag. double row pin header: right angle type unit: mm part number cl no. mdf6- 4dp-3.5ds mdf6- 6dp-3.5ds mdf6- 8dp-3.5ds mdf6-10dp-3.5ds 547-0270-0 547-0271-2 547-0272-5 547-0273-8 4 6 8 10 10.5 14 17.5 21 number of contacts a 3.5 7 10.5 14 b board hole diameter : ?1.3 applicable board thickness : 1.60.2 +0.1 + 0
b111 b precautions for use 1. recommended soldering condition flow: 250? for 3 seconds manual soldering: 290? for 2 seconds 2. cleaning condition refer to the "nylon connector use hand book". 3. connection condition refer to the "nylon connector use hand book". 4. cautions the color phase of this product is slightly different from that of the formed product according to the manufacturing lot and future storage conditions, but the difference doesn't affect the performance. b application pattern
|
