1 of 8 optimum technology matching? applied gaas hbt ingap hbt gaas mesfet sige bicmos si bicmos sige hbt gaas phemt si cmos si bjt gan hemt functional block diagram rf micro devices?, rfmd?, optimum technology matching?, enabling wireless connectivity?, powerstar?, polaris? total radio? and ultimateblue? are trademarks of rfmd, llc. bluetooth is a trade- mark owned by bluetooth sig, inc., u.s.a. and licensed for use by rfmd. all other trade names, trademarks and registered tradem arks are the property of their respective owners. ?2006, rf micro devices, inc. product description 7628 thorndike road, greensboro, nc 27409-9421 for sales or technical support, contact rfmd at (+1) 336-678-5570 or sales-support@rfmd.com . ordering information v1 v2 v3 rf3 rf2 rf1 ant rf1132 broadband high power sp3t switch the rf1132 is a single-pole triple-thr ow (sp3t) switch designed for cdma handset applications and general purpose switching applications which require very low insertion loss and high power handling capability. the rf1132 is ideally suited for battery operated applications requiring high performance switching with very low dc power consumption. the rf1132 features low insertion loss, excellen t cross-modulation performance, and good isolation. it is fabricated with 0.5 m gaas phemt process, and is packaged in a very compact 2mmx2mm, 12-pin, leadless qfn package. features ? broadband performance low frequency - 2.5ghz ? low insertion loss 0.48db typ at 0.90ghz 0.68db typ at 1.90ghz ? good isolation: 23db typ at 1.90ghz ? excellent cross-modulation performance: -102dbm typ @ 0.90ghz -100dbm typ @ 1.90ghz ? p0.1db>34dbm ? compact footprint (2.0mmx2.0mmx0.55mm, 12-pin qfn) applications ? cdma handset applications ? antenna tuning applications ? ieee802.11b/g wlan appli- cations ? multi-mode gsm/w-cdma applications ? gsm/gprs/edge switch applications rf1132 broadband high power sp3t switch rf1132pcba-410 fully assembled evaluation board rev a2 ds090327 9 package style: qfn, 12-pin, 2mmx2mm
2 of 8 rf1132 rev a2 ds090327 7628 thorndike road, greensboro, nc 27409-9421 for sales or technical support, contact rfmd at (+1) 336-678-5570 or sales-support@rfmd.com . absolute maximum ratings parameter rating unit voltage 6.0 v maximum input power (0.6ghz to 2.5ghz), rf1, rf2, rf3 +36 dbm operating temperature -30 to +85 c storage temperature -65 to +100 c parameter specification unit condition min. typ. max. v control =0/2.6v, nominal test conditions unless otherwise specified: zo=50 . temp=25c. need external dc blocking capacitors on all rf ports. operating frequency 0.6 2.5 ghz insertion loss cellular 0.48 0.58 db ant to rfx on, 824mhz to 894mhz gps 0.60 0.70 db ant to rfx on, 1574mhz to 1577mhz pcs 0.68 0.78 db ant to rfx on, 1850mhz to 1990mhz rf>ant isolation cellular 28 30 db rfxoff to rfx on, 824mhz to 894mhz gps 23 25 db rfxoff to rfx on, 1574mhz to 1577mhz pcs 21 23 db rfxoff to rfx on, 1850 mhz to 1990 mhz second harmonics cellular -82 -78 dbc +26dbm input pcs -84 -80 dbc +26dbm input third harmonics cellular -91 -80 dbc +26dbm input pcs -95 -82.5 dbc +26dbm input iip3 iip3 - cellular (imt, pcs, aws) 64 65 dbm two tones: +23dbm, 837mhz and 838mhz 67 dbm two tones: +23dbm, 837mhz and 838mhz, v control =3v iip3 - pcs 61 63 dbm two tones: +23dbm, 1880mhz and 1881mhz 65 dbm two tones: +23dbm, 1880mhz and 1881mhz, v control =3v cross-modulation cellular -102 -101 dbm ptx1=23dbm @ 836mhz, ptx2=23dbm @ 837mhz; p int =-23dbm @ 881.5mhz -105 dbm ptx1=23dbm @ 836mhz, ptx2=23dbm @ 837mhz; p int =-23dbm @ 881.5mhz, v control =3v pcs -100 -96 dbm ptx1=23dbm @ 1879.5mhz, ptx2=23dbm @ 1880.5mhz; p int =-23dbm @ 1960mhz -102 dbm ptx1=23dbm @ 1879.5mhz, ptx2=23dbm @ 1880.5mhz; p int =-23dbm @ 1960mhz, v control =3v caution! esd sensitive device. exceeding any one or a combination of the absolute maximum rating conditions may cause permanent damage to the device. extended application of absolute maximum rating conditions to the device may reduce device reliability. specified typical perfor- mance or functional operation of the devi ce under absolute maximum rating condi- tions is not implied. rohs status based on eudirective2002/95/ec (at time of this document revision). the information in this publication is believed to be accurate and reliable. however, no responsibility is assumed by rf micro devices, inc. ("rfmd") for its use, nor for any infringement of patents, or other rights of third parties, resulting from its use. no license is granted by implication or otherwise under any patent or patent rights of rfmd. rfmd reserves the right to change component circuitry, recommended appli- cation circuitry and specifications at any time without prior notice.
3 of 8 rf1132 rev a2 ds090327 7628 thorndike road, greensboro, nc 27409-9421 for sales or technical support, contact rfmd at (+1) 336-678-5570 or sales-support@rfmd.com . switch control settings parameter specification unit condition min. typ. max. rf port return loss rf>ant -24 -15 db 0.5ghz to 2.0ghz input power at 0.1db compression point cellular >+35 dbm pcs >+35 dbm switching speed t rise , t fall 0.80 1 us 10% to 90% rf, 90% to 10% rf t on , t off 0.80 1 s 50% control to 90% rf, 50% control to 90% rf dc controls v high (v1, v2, v3) 2.6 3.6 v v low (v1, v2, v3) 0 0.4 v control current 10 a leakage current 10 a v1 v2 v3 ant-rf1 ant-rf2 ant-rf3 100onoffoff 010offonoff 001offoffon 0: logic level low, 0v to 0.4v 1: logic level high, 2.6v to 3.6v note: indeterminate states would lead to degraded performance.
4 of 8 rf1132 rev a2 ds090327 7628 thorndike road, greensboro, nc 27409-9421 for sales or technical support, contact rfmd at (+1) 336-678-5570 or sales-support@rfmd.com . pin out pin function description 1v3 control signal 3 2rf3 rf port 3 3gnd ground 4gnd ground 5rf2 rf port 2 6v2 control signal 2 7gnd ground 8rf1 rf port 1 9v1 control signal 1. 10 gnd ground 11 ant antenna connection 12 gnd ground pkg base n/c should be left floating for best performance. rf performance specifications in this ds are quoted with package base left floating. 1 v3 2 rf3 3 gnd 4 gnd 5 rf2 6 v2 9v1 8rf1 7gnd gnd ant gnd 10 11 12
5 of 8 rf1132 rev a2 ds090327 7628 thorndike road, greensboro, nc 27409-9421 for sales or technical support, contact rfmd at (+1) 336-678-5570 or sales-support@rfmd.com . package drawing
6 of 8 rf1132 rev a2 ds090327 7628 thorndike road, greensboro, nc 27409-9421 for sales or technical support, contact rfmd at (+1) 336-678-5570 or sales-support@rfmd.com . evaluation board schematic note: package base needs to be left fl oating for best isolation performance. package base 1 2 3 c7 100 pf c6 100 pf rf3 v3 6 5 4 c5 100 pf rf2 c4 100 pf v2 9 8 7 c2 100 pf rf1 v1 10 11 12 c1 100 pf l1 dni c8 dni ant c3 100 pf
7 of 8 rf1132 rev a2 ds090327 7628 thorndike road, greensboro, nc 27409-9421 for sales or technical support, contact rfmd at (+1) 336-678-5570 or sales-support@rfmd.com . typical performance insertion loss (v control =2.6v; t=25c) -0.9 -0.8 -0.7 -0.6 -0.5 -0.4 -0.3 -0.2 0.5 1.0 1.5 2.0 frequency (ghz) insertion loss (db) isolation (v control =2.6v; t=25c) -40.0 -35.0 -30.0 -25.0 -20.0 -15.0 -10.0 -5.0 0.0 0.5 1.0 1.5 2.0 frequency (ghz) isolation (db) match (v control =2.6v; t=25c) -35.0 -30.0 -25.0 -20.0 -15.0 -10.0 -5.0 0.5 1.0 1.5 2.0 frequency (ghz) return loss (db)
8 of 8 rf1132 rev a2 ds090327 7628 thorndike road, greensboro, nc 27409-9421 for sales or technical support, contact rfmd at (+1) 336-678-5570 or sales-support@rfmd.com .
|
