? all specifications are subject to change without notice. ? conformity to rohs directive: this means that, in conformity with eu directive 2002/95/ec, lead, cadmium, mercury, hexavalent chromium, and specific bromine-based flame retardants, pbb and pbde, have not been used, except for exempted applications. common mode filters mcz series type: issue date: mcz1210ah [0504 inch]* mcz2010ah [0804 inch] * dimensions code [eia] september 2012 for high-speed differential signal line (usb2.0, lvds, etc.)
? all specifications are subject to change without notice. (1/4) 001-03 / 20120906 / e9712_mcz_ah common mode filters for high-speed differential signal line (usb2.0, lvds, etc.) mcz series mcz1210ah features ? compact sized multilayer common mode filter. ? by providing wide bandwidth for differential mode, this product has almost no effect for high-speed differential signals and can suppress the radiated emission. applications ? high speed interface(lvds and usb2.0) in electronics devices. ? digital cellular phones, pcs, dscs, portable game machines, etc. product identification (1) series name (2) dimensions l ? w (3) product identification number (4) impedance[at 100mhz] 360: 36 ? (5) number of line l2: 2-line (6) packaging style t: taping recommended soldering condition reflow soldering shapes and dimensions/ recommended pc board patterns circuit diagrams temperature range packaging style and quantities handling and precautions ? before soldering, be sure to preheat components. the preheat- ing temperature should be set so that the temperature difference between the solder temperature and product temperature does not exceed 150c. ? after mounting components onto the printed circuit board, do not apply stress through board bending or mishandling. ? do not expose the inductors to stray magnetic fields. ? avoid static electricity discharge during handling. ? when hand soldering, apply the soldering iron to the printed cir- cuit board only. temperature of the iron tip should not exceed 350c. soldering time should not exceed 3 seconds. ? this product does not apply to flow soldering construction method. conformity to rohs directive mcz 1210 ah 360 l2 t (1) (2) (3) (4) (5) (6) natural cooling 10s max. preheating 60 to 120s soldering 30 to 60s 230?c 250 to 260?c 180?c 150?c time(s) operating ?40 to +85c storage(after mount) ?40 to +85c packaging style quantity taping 4000 pieces/reel 1.0 0.15 0.55 0.1 1.25 0.15 0.5 0.1 0.3 0.1 weight: 3mg dimensions in mm 43 12 0.25 0.7 to 0.75 0.3 0.5 43 12 ~ no polarity 43 12 ? conformity to rohs directive: this means that, in conformity with eu directive 2002/95/ec, lead, cadmium, mercury, hexavalent chromium, and specific bromine-based flame retardants, pbb and pbde, have not been used, except for exempted applications.
? all specifications are subject to change without notice. (2/4) 001-03 / 20120906 / e9712_mcz_ah electrical characteristics typical electrical characteristics impedance vs. frequency characteristics part no. common mode impedance ( ? ) [100mhz] dc resistance ( ? )max.[1 line] rated current idc(ma)max. rated voltage edc(v)max. insulation resistance (m ? )min. mcz1210ah360l2t 3625% 1.00 200 5 10 MCZ1210AH900L2T 9025% 1.75 100 5 10 mcz1210ah201l2t 20025% 4.00 100 5 10 mcz1210ah301l2t 30025% 4.50 100 5 10 1 10 100 1000 10000 10000 1000 100 1 10 impedance ( ) frequency ( mhz ) 900 common mode 360 common mode 900 differential mode 360 differential mode 1 10 100 1000 10000 10000 1000 100 1 10 impedance ( ) frequency ( mhz ) 301 common mode 201 common mode 301 differential mode 201 differential mode
? all specifications are subject to change without notice. (3/4) 001-03 / 20120906 / e9712_mcz_ah common mode filters for high-speed differential signal line (usb2.0, lvds, etc.) mcz series mcz2010ah features ? compact sized multilayer common mode filter. ? by providing wide bandwidth for differential mode, this product has almost no effect for high-speed differential signals and can suppress the radiated emission. applications ? high speed interface(lvds and usb2.0) in electronics devices. ? pdp/lcd/dlp/pj tvs, dvd players, notebook pcs, dvcs, dscs, amusement machines, portable audio, digital cellular phones, etc. product identification (1) series name (2) dimensions l ? w (3) product identification number (4) impedance[at 100mhz] 900: 90 ? (5) number of line l4: 4line (6) packaging style t: taping recommended soldering condition reflow soldering shapes and dimensions/ recommended pc board patterns circuit diagrams temperature range packaging style and quantities handling and precautions ? before soldering, be sure to preheat components. the preheat- ing temperature should be set so that the temperature difference between the solder temperature and product temperature does not exceed 150c. ? after mounting components onto the printed circuit board, do not apply stress through board bending or mishandling. ? do not expose the inductors to stray magnetic fields. ? avoid static electricity discharge during handling. ? when hand soldering, apply the soldering iron to the printed cir- cuit board only. temperature of the iron tip should not exceed 350c. soldering time should not exceed 3 seconds. ? this product does not apply to flow soldering construction method. conformity to rohs directive mcz 2010 ah 900 l4 t (1) (2) (3) (4) (5) (6) natural cooling 10s max. preheating 60 to 120s soldering 30 to 60s 230?c 250 to 260?c 180?c 150?c time(s) operating ?40 to +85c storage(after mount) ?40 to +85c packaging style quantity taping 5000 pieces/reel 0.5 0.1 1.0 0.15 2.0 0.15 0.5 0.1 0.25 0.1 0.2 0.15 weight: 5.0mg dimensions in mm 1234 87 65 dimensions in mm 1.8 0.6 0.25 0.5 12 34 8765 ~ no polarity 1234 8765 ? conformity to rohs directive: this means that, in conformity with eu directive 2002/95/ec, lead, cadmium, mercury, hexavalent chromium, and specific bromine-based flame retardants, pbb and pbde, have not been used, except for exempted applications.
? all specifications are subject to change without notice. (4/4) 001-03 / 20120906 / e9712_mcz_ah electrical characteristics typical electrical characteristics impedance vs. frequency characteristics part no. common mode impedance ( ? ) [100mhz] dc resistance ( ? )max.[1 line] rated current idc(ma)max. rated voltage edc(v)max. insulation resistance (m ? )min. mcz2010ah900l4t 9025% 1.50 100 5 10 mcz2010ah121l4t 12025% 2.00 100 5 10 mcz2010ah201l4t 20025% 3.50 100 5 10 1 10 100 1000 10000 10000 1000 100 1 10 impedance ( ) frequency ( mhz ) 121 common mode 900 common mode 121 differential mode 900 differential mode 1 10 100 1000 10000 10000 1000 100 1 10 impedance ( ) frequency ( mhz ) 201 common mode 201 differential mode
|