1 technical data sheet 75 ohm smb plug connector clamp/solder attachment for rg179, rg187 confguration connector smb plug connector specifcation mil-c-39012 connector interface type rg179,rg187 cable attachment method (shield/contact) clamp/solder body style straight electrical specifcations impedance, ohms 75 mechanical specifcations temperature operating range, deg c -65 to +165 size length, in [mm] 0.75 [19.05] width/dia., in [mm] 0.362 [9.19] . weight, lbs [g] 0.013 [5.9] connector type smb plug contact material and plating gold contact plating specifcation mil-g-45204 body material and plating brass, nickel dielectric type t efon compliance certifcations (visit www.pasternack.com for current document) rohs compliant y es plotted and other data notes: v alues at 25 c, sea level 75 ohm smb plug connector clamp/solder attachment for rg179, rg187 from pasternack enterprises has same day shipment for domestic and international orders. our rf, microwave and fber optic products maintain a 99% availability and are part of the broadest selection in the industry. click the following link (or enter part number in search on website) to obtain additional part information including price, inventory and certifcations: 75 ohm smb plug connector clamp/solder attachment for rg179, rg187 PE4257 url: http://www.pasternack.com/smb-plug-standard-rg179-rg187-connector-PE4257-p.aspx PE4257 PE4257 rev 75 ohm smb plug connector clamp/solder attachment for rg179, rg187
? 2013 pasternack enterprises all rights reserved 2 PE4257 rev scale n/a dwg title cad file 2233 fscm no. 53919 rev. - 042309 size a PE4257 notes: 1. unless otherwise specified all dimensions are nominal. 2. all specifications are subject to change without notice at any time. 3. dimensions are in inches [mm]. 4. fits mil-c-17 and equivalent cables. 1. slide clamp nut (1) over cable. strip cable as shown. do not nick braid & center conductor. slit jacket in 2 places. tin center conductor. 2. slide cone assembly (2) over dielectric & under braid. slide rear insulator (3) over center conductor resting against cone assembly (2). 3. solder contact (4) to center conductor through hole in contact. slide front insulator (5) over contact. insert cable assembly into body & tighten. assembly procedures 75 ohm smb plug connector clamp/solder attachment for rg179, rg187 PE4257 cad drawing
|
