View 1361138-1_6988607.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

ty co electronics corporation harrisburg, pa tycoelectronics.com 1307191C3mClugCfpC3-07 rf coax products rf coax products catalog catalog 1307191 revised 3-07 cat1307191_cover+spine_v7.qxd 2/21/07 2:46 pm page 1
2 catalog 1307191 dimensions are in millimeters dimensions are shown for usa: 1-800-522-6752 south america: 55-11-2103-6000 revised 3-07 and inches unless otherwise reference purposes only. canada: 1-905-470-4425 hong kong: 852-2735-1628 specified. values in brackets specifications subject mexico: 01-800-733-8926 japan: 81-44-844-8013 www.tycoelectronics.com are standard equivalents. to change. c. america: 52-55-1106-0803 uk: 44-8706-080-208 introduction rf coax connectors the tyco electronics rf coaxial catalog combines the best products from industry leading brand names like m/a-com and amp. we have integrated these into one cohesive set of rf products focused specifically on wireless, wireline carrier, and enter- prise networking sectors of the world telecom equip- ment market. t yco electronics broadest selection of rf connectors and coaxial cable assem- blies provides you with a solution for every intercon- nection requirement. t ype n and 7/16 connec- tors are used where high power and rugged reliability are required, typically as antenna feeds, filter/ combiner i/os, and power amplifier outputs. sma, smb, and tnc connectors are the primary cable inter- face for inner cabinet rout- ing and are available in panel mount, board mount, and cable terminations. subminiature connectors such as mcx, smp, din, and blindmate provide panel to board and back- plane connections. finally, our micro miniature ssmt, and mmcx series provide excellent board to board and card edge to board solutions. all of these interfaces are supported with cable termi- nating tools and between series adapters to meet all your requirements for trou- ble free terminations at the lowest applied cost. the appendices hold a wealth of information including a theory and application tutorial, rg/u cable specifi- cation tables, application notes on white bronze plat- ing and intermodulation distortion. whether you need rugged external rf power cables, panel mount, board to board, blindmate, or din, t yco electronics has the connection. how to use this catalog based on the communica- tions gear that you are designing: wireless basestations carrier rack equipment chassis set top box nic card t ypical equipment drawings on pages 306-309 guide you to the interconnect section(s) in this catalog. selection guides will direct you to products based on performance and mechanical requirements such as impedance, vswr, max. frequency, power handling, etc. there are other guides to help you find the right connection: a table of contents listed by interface type, a complete connector type selector describes each interface with typical applications, and a mini- selection guide shows key parameters to quickly pinpoint the right connector type. product facts listed under the component program of underwriters laboratories inc., file no. e-81956 as indicated by product family recognized under the component program of underwriters laboratories inc., file no. e-81956 as indicated by product family certified by canadian standards association file no. lr 7189 as indicated by product family produced under a quality management system certified to iso 9001 a copy of the certificate is available upon request iso certified 9001 r r r need more information? call technical support at the numbers listed below. t echnical support is staffed with specialists well versed in all tyco electronics products. they can provide you with: t echnical support catalogs t echnical documents product samples t yco electronics authorized distributor locations restriction on the use of hazardous substances (rohs) at tyco electronics, we?e ready to support your rohs require- ments. we?e assessed more than 1.5 million end items/com- ponents for rohs compliance, and issued new part numbers where any change was required to eliminate the restricted materials. part numbers in this catalog are identified as: rohs compliant ?part numbers in this catalog are rohs compliant, unless marked otherwise. these products comply with european union directive 2002/95/ec as amended 1 january 2006 that restricts the use of lead, mercury, cadmium, hexavalent chromium, pbb, and pbde in certain electrical and electronic products sold into the eu as of 1 july 2006. note: for purposes of this catalog, included within the defini- tion of rohs compliant are products that are clearly ?ut of scope?of the rohs directive such as hand tools and other non-electrical accessories. non-rohs compliant ?these part numbers are identified with a ?symbol. these products do not comply with the material restrictions of the european union directive 2002/95/ec. note: information regarding rohs compliance is provided based on reasonable inquiry of our suppliers and represents our current actual knowledge based on the information provided by our suppliers. this information is subject to change. for lat- est compliance status, refer to our website referenced at right. getting the information you need our comprehensive on-line rohs customer support center provides a forum to answer your questions and support your rohs needs. a rohs faq (frequently asked questions) is available with links to more detailed information. you can also submit rohs questions and receive a response within 24 hours during a normal work week. the support center also provides: cross-reference from non-compliant to compliant products ability to browse rohs compliant products in our on-line catalog downloadable technical data customer information presentation more detailed information regarding the definitions used above so whatever your questions when it comes to rohs, we?e got the answers at www.tycoelectronics.com/leadfree rohs customer support center
3 catalog 1307191 dimensions are in millimeters dimensions are shown for usa: 1-800-522-6752 south america: 55-11-2103-6000 revised 3-07 and inches unless otherwise reference purposes only. canada: 1-905-470-4425 hong kong: 852-2735-1628 specified. values in brackets specifications subject mexico: 01-800-733-8926 japan: 81-44-844-8013 www.tycoelectronics.com are standard equivalents. to change. c. america: 52-55-1106-0803 uk: 44-8706-080-208 rf catalog table of contents rf coax connectors disclaimer while tyco electronics corporation and its affiliates referenced herein (?yco electronics? have made every reasonable effort to ensure the accuracy of the information in this catalog, t yco electronics does not guarantee that it is error-free, nor does tyco electronics make any other representation, warranty or guarantee that the information is accurate, correct, reliable or current. t yco electronics reserves the right to make any adjustments to the information contained herein at any time without notice. tyco electronics expressly dis- claims all implied warranties regarding the information contained herein, includ- ing, but not limited to, any implied war- ranties of merchantability or fitness for a particular purpose. tyco electronics only obligations are those in the t yco electronics standard terms and conditions of sale, and in no case will t yco electronics be responsible for any incidental, indirect, or consequential damages arising from the sale, resale, use, or misuse of its products. users should independently evaluate the suit- ability of, and test each product for, their application. the dimensions, specifications, designs, construction, materials and processes in this catalog are for reference purposes only and are subject to change without notice. please consult tyco electronics for the most current product information. the export of certain tyco electronics products is restricted by the arms export control act (title 22, u.s.c. sec 2751, et seq.) or the export administration act of 1979, as amended (title 50, u.s.c., app. 2401 et seq.). orders may be subject to export approval by the u.s. government. buyer must comply with all applicable export laws of all applicable jurisdictions. ?copyright 2007, 2000, 1998, 1994, 1992, 1990, and 1982 by t yco electronics corporation. all international rights reserved. action pin, amp, amp-hdi, amplimite, amp-o-lectric, certi-crimp, coaxicon, m/a-com, osp, ossp, pidg, pro-crimper, raychem, siemax, smt/quickgrip, solistrand, stax, te logo, tyco electronics and z-pack are trademarks. a t&t is a trademark of at&t corporation. belden is a trademark of belden wire and cable company. berk-tek is a trademark of nexans, inc. comm/scope is a trademark of commscope, inc. daniels is a trademark of daniels manufacturing corporation. gpo is a trademark of corning gilbert, inc. hirose is a trademark of hirose electric. murata is a trademark of murata electronics, inc. rolm is a trademark of the rolm corp. teflon is a trademark of e.i. dupont de nemours and company. tpx is a trademark of mitsui chemicals america, inc. trompeter is a trademark of t rompeter electronics, inc. v alox is a trademark of general electric company. other products, logos, and company names mentioned herein may be trademarks of their respective owners. see inside back cover for global contacts and phone numbers. miniature connectors 7-16 series connectors .................................................................................................7-11 lightning protection connectors .................................................................................12-19 surge protectors ......................................................................................................12-15 /4 wave stub tuners ..............................................................................................16-19 n series connectors....................................................................................................20-25 quick lock n (qln) series connectors .....................................................................26-28 tnc connectors ..........................................................................................................29-43 bnc connectors..........................................................................................................44-77 mini bnc connectors ..................................................................................................78-81 decoupled connectors................................................................................................82-87 self-terminating pc board connectors ............................................................................88 t win bnc connectors..................................................................................................89-92 f series and g series connectors ..............................................................................93-99 subminiature connectors sma connectors......................................................................................................100-123 qma connectors .....................................................................................................124-128 din connectors .......................................................................................................129-156 series 1.0/2.3 .......................................................................................................129-137 series 1.6/5.6 .......................................................................................................138-146 measurement accessories...................................................................................147-150 coaxial cables ............................................................................................................151 smp connectors ......................................................................................................152-156 blind mate connectors ............................................................................................157-175 osp miniature blind mate connectors ................................................................157-168 ossp subminiature blind mate connectors........................................................169-175 smb connectors......................................................................................................176-192 smc connectors......................................................................................................193-195 mcx connectors......................................................................................................196-203 compression coax board-to-board connectors............................................................204 stax coax connectors ..........................................................................................205, 206 micro miniature rf coax connectors smt/quickgrip connectors.....................................................................................207-211 ssmt connectors ....................................................................................................212-217 mmcx connectors...................................................................................................218-221 umcc connectors...................................................................................................222-228 switching coax connectors ....................................................................................229-236 quick snap stripline (qsl) connectors .........................................................................237 multi position connectors din inserts ...............................................................................................................238-2 41 size 8 contacts.......................................................................................................242, 243 coaxicon contacts...............................................................................................244-248 siemax connectors ...............................................................................................249, 250 between series adapters ............................................................................................251-260 coaxial terminations .........................................................................................................261 application tooling .....................................................................................................262-268 cable assembly capabilities ......................................................................................269-271 appendix a - theory and application......................................................................................272-277 b - white bronze application note..........................................................................278-280 c - intermodulation application note ......................................................................281-283 d - typical coaxial cable specifications ................................................................284-298 e - maximum power handling capabilities for cables ..................................................299 f - nominal loss characteristics for cables ..................................................................300 g - glossary of terms..............................................................................................301-305 rf coaxial solutions for communications equipment overview ..............................306-309 rohs compliant to non-rohs compliant part number cross reference ................310-312 m/a-com part number cross reference ...................................................................313, 314 part number index ......................................................................................................315-318
4 catalog 1307191 dimensions are in millimeters dimensions are shown for usa: 1-800-522-6752 south america: 55-11-2103-6000 revised 3-07 and inches unless otherwise reference purposes only. canada: 1-905-470-4425 hong kong: 852-2735-1628 specified. values in brackets specifications subject mexico: 01-800-733-8926 japan: 81-44-844-8013 www.tycoelectronics.com are standard equivalents. to change. c. america: 52-55-1106-0803 uk: 44-8706-080-208 connector selection rf coax connectors connector types 7-16 series connectors are designed for medium to high power applications such as cellular base stations, control components, antenna and broadcast. the 7-16 series minimizes intermodulation distortion by white bronze or silver plating the electrical path. combined hex/knurl coupling nuts allow for manual or torque tightening, further reducing distortion by providing a strong butt joint. lightning protection devices have an integral surge arrestor capsule which is designed to protect equipment from high current pulses. it is effective against very fast rise times as induced by electromag- netic pulses from nuclear explosions (nemp) and the slower pulses arising from lightning strikes (lemp). n series threaded connectors have an air dielectric interface and are low cost. these connectors operate to 11 ghz and are commonly used in cable-based local-area networks (lans) medium power transmitters, and base station antenna applications. tnc connectors have an interface similar to bnc except for a threaded coupling nut. the tighter fit provided by this screw-on connection improves interface control allowing connectors to operate up to 11 ghz. tnc connectors are excellent for mobile units where top-notch performance is required under vibration. bnc connectors offer easy engagement and disengagement using bayonet couplings and overlap- ping dielectrics. they are most useful for frequently coupled and uncoupled rf connections with fre- quencies below 4 ghz. bnc connectors find applications in flexible networks, instrumentation, and computer peripheral interconnections. f & g series connectors offer enhanced performance beyond 1 ghz. designed to meet the rigor- ous requirements of bellcore ta-nwt-001503 and scte specifications, the f & g series provides high current carrying capabilities in both sealed and un-sealed configurations. plugs, jacks and adapters are available in threaded and push-on versions. these connectors meet the evolving needs of the communications industry for increased reliability and performance. sma threaded connectors are widely used in microwave communications. connectors operate to at least 12.4 ghz on flexible coax cables, and up to 26.5 ghz on semi-rigid coax cables. crimp-on sma connectors that operate to 26.5 ghz are available. blind mate connectors operate to 22 ghz for osp connectors, 28 ghz for ossp connectors, and 40 ghz for smp style connectors. these connectors offer easy slide-on connection and require less alignment between the cable and the equipment than other connectors with comparable band width. blind mate connectors are widely used as coaxial interconnects between plug-in modules and moth- erboards when axial and radial misalignments are necessary. smb connectors feature a snap coupling for fast connection. a self centering outer spring and over- lapping dielectric allows easy snap-on and excellent performance even in moderate vibration. the smb is smaller in size than the sma and excellent where engineers are concerned about circuit miniaturization. typical application is inter- or intra-board connection of rf or digital signals. commercial 50 ohm versions operate to 4 ghz, and 75 ohm versions reach 2 ghz. mcx connectors offer a high reliability, space saving sub-miniature coaxial cable to cable and cable to board interconnection system. the mcx connectors impedance types are applicable up to 6 ghz. surface mount (smt) connectors. the rf solution to the communication and information age. t yco electronics?ssmt and smt quick grip connectors are designed to meet the growing demand for surface mount rf connector technology. these connectors operate up to 6 ghz utilizing cable assembly design to terminate to smt connectors. surface mount connectors contribute to high density packaging and high volume manufacturing requirements. multi position connectors. these connector series, including the 1.0/2.3 (cecc 22230), 1.6/5.6 (cecc 22240), subminiature d (din 41652 and cecc 75 301-082), and tyco electronics?own siemax multi coax connector series offer the customer a broad choice of options where density and performance are a major concern. the 1.0/2.3 series contacts are available in both 50 and 75 ohm versions and are designed for use to 10 ghz. the different types of coupling mechanisms, such as screw on, slide-in and latching coupling provide for a variety of space-saving installations. the con- nector series 1.6/5.6 has been modified to incorporate improved technical advantages. a 75 ohm design for use up to 8 ghz, it offers excellent screening effectiveness and is a most suitable compo- nent for those applications where the transmission of high bit rates is required. in subminiature d type connectors these interfaces provide good electrical grounding and electromagnetic shielding in a small package size. these plug connectors address the increasing demands related to emc (electromagnetic compatibility) and rfi (immunity to radiated noise), and are widely used as inter- face connectors in office and data systems, telecommunications equipment, and in measurement and control systems. tyco electronics?siemax connectors combine the benefits of surface mount technology and modular design. this 75 ohm connector series operates up to 2 ghz and offers a compact grid pitch of 10mm. its uses include multiplex and high-density systems, and base station applications. miscellaneous connector types include multiple-circuit connectors that use coaxial contacts in a pin-and-socket configuration, crimp-on ferrules that offer fast, reliable connections for attaching one or more ground taps to shielded wire and braided shield terminations for connecting cable shields to pc boards. also available are network/premises interconnect products for ethernet/ieee 802.3 systems and coaxial taps for simple, dependable connections from transceiver to lan without cutting the cable.
5 catalog 1307191 dimensions are in millimeters dimensions are shown for usa: 1-800-522-6752 south america: 55-11-2103-6000 revised 3-07 and inches unless otherwise reference purposes only. canada: 1-905-470-4425 hong kong: 852-2735-1628 specified. values in brackets specifications subject mexico: 01-800-733-8926 japan: 81-44-844-8013 www.tycoelectronics.com are standard equivalents. to change. c. america: 52-55-1106-0803 uk: 44-8706-080-208 connector selection guide nominal maximum t emperature cable retention coupling maximum durability connector page product impedance frequency rating mechanism p eak cycles body no. ohms ghz c lb [n] voltage finish 7-16 series 50 7 -55 to +155 rg8a/u threaded 4000 500 white bronze 7 lightning protection 50 2.5 -45 to +85 adapter threaded 650 500 white bronze 12 n series 50 11 -65 to +85 90 400.3 threaded 1000 500 nickel 20 commercial (rg-214/u) tnc 50 7 -65 to +165 60 266.9 threaded 500 500 silver 29 single crimp (rg-58c/u) tnc 50 11 -65 to +165 60 266.9 threaded 500 500 silver or nickel 29 dual crimp (rg-58c/u) tnc 50 7 -55 to +85 60 266.9 threaded 500 500 nickel 29 commercial (rg-58c/u) tnc 75 2 -55 to +85 60 266.9 threaded 500 500 nickel 29 75 ohm (rg-59b/u) bnc 50 2.5 -65 to +165 60 266.9 bayonet 500 500 silver or nickel 44 single crimp (rg-58c/u) bnc 50 4 -65 to +165 60 266.9 bayonet 500 500 silver or nickel 44 dual crimp (rg-58c/u) bnc 50 4 -55 to +85 60 266.9 bayonet 500 500 nickel 44 dual crimp commercial (rg-58c/u) bnc 50 4 -55 to +85 60 266.9 bayonet 500 500 nickel 44 hex crimp (rg-58c/u) bnc 50 4 -65 to +165 40 177.9 bayonet 500 500 nickel 44 field serviceable (rg-142b/u) bnc 75 2 -65 to +85 60 266.9 bayonet 500 500 nickel 44 75 ohm (rg-59b/u) t win bnc non- -55 to +85 25 111.2 bayonet 500 200 silver or nickel 89 constant (rg-108/u) 40 f series 75 -55 to +85 (series 59, 6, 7 threaded (f) 500 200 nickel 93 single braid) 40 g series 75 -55 to +85 (series 59, 6, 7 push-on (g) 500 200 nickel 93 single braid) sma 50 26.5 -65 to +105 60 266.9 threaded 500 500 gold or passivated 100 semi-rigid (rg-402/u) stainless steel sma 50 12.4 -65 to +165 40 177.9 threaded 500 500 gold or passivated 100 flexible (rg-58c/u) stainless steel smp 50 40 -65 to +165 20 89 snap-on 500 100 gold 152 (rg-405/u) osp 50 22 -65 to +125 60 267.02 push-on 500 5000 gold or passivated 157 semi-rigid (rg-402/u) stainless steel osp 50 12.4 -65 to +125 40 178 push-on 335 5000 gold or passivated 157 flexible (rg-58/u) stainless steel ossp 50 28 -65 to +125 20 89 push-on 335 5000 gold or passivated 169 semi-rigid (rg-405/u) stainless steel ossp 50 -65 to +125 20 89 push-on 250 5000 gold or passivated 169 flexible (rg-316/u) stainless steel smb 50 4 -65 to +85 20 89 snap-on 335 500 nickel 176 (rg-316/u) smc 50 10 -65 to +85 20 89 threaded 250 500 gold 193 (rg-174/u) 50 6 -65 to +165 20 32 snap-on 500 500 nickel 196 mcx (rg-316/u) connectors 20 32 snap-on 500 500 nickel 196 75 6 -65 to +165 (rg-187/u) smt quick grip 50 3 -40 to +125 omni-flex snap-on 250 5 gold 207 ssmt 50 6 -40 to +125 omni-flex snap-on 250 100 gold 212 mmcx 50 6 -55 to +155 10 44.5 snap-on 500 500 gold 218 (rg-178/u) mini bnc 75 2 -40 to +85 20 bayonet 300 500 nickel 78 (735a) qma 50 6 -40 to +125 20 quick lock 335 100 nickel 124 (rg-316/u) comp. coax 50 4 -40 to +125 n/a n/a 125 25 gold 204 50 10 -40 to +85 thread/ 500 500 129 din 1.0/2.3 snap/slide thread/ 500 500 129 75 2 -40 to +85 snap/slide switching coax 50 2.4 n/a n/a 30,000 229 rf coax connectors
6 catalog 1307191 dimensions are in millimeters dimensions are shown for usa: 1-800-522-6752 south america: 55-11-2103-6000 revised 3-07 and inches unless otherwise reference purposes only. canada: 1-905-470-4425 hong kong: 852-2735-1628 specified. values in brackets specifications subject mexico: 01-800-733-8926 japan: 81-44-844-8013 www.tycoelectronics.com are standard equivalents. to change. c. america: 52-55-1106-0803 uk: 44-8706-080-208 rf coax connectors connector selection (continued) method of termination t yco electronics provides connectors that can be termi- nated to coaxial cable, printed circuit boards or other con- nector interfaces. selection of the proper connector to terminate to an rg cable is simplified by using the format of this catalog. experience has proven that certain connector types lend themselves to termination of particular coax cable sizes. for example, miniature cables such as rg 188 are most practically terminated to subminiature connectors such as smb and smc styles. figure 3 illustrates the interface diameters of each connector type and the dielectric out- side diameter (dod) of popular rg cables. it is most eco- nomical to select a connector that terminates to a cable with a dielectric diameter close in size to the connectors interface diameter. the product information sections of this catalog have been organized so that all connector con- struction types are grouped together by cable size. this allows easy selection of the connector construction best suited for the application. t yco electronics continually looks at new cable types and will release new part numbers based upon general market or specific customer needs. if you cannot find a t yco electronics part number for a specific cable type, please contact one of our sales locations or your local distributor to make an inquiry. t yco electronics offers a wide range of connector configu- rations for terminating to printed circuit boards. also avail- able are connectors which allow the interconnection of one interface type to another. by reviewing this catalog, a connector can be found to match most any application. since the rf connector is a part of a transmission line system, make sure when select- ing a new connector design, that it is compatible with the overall systems performance. construction the construction of a connector will greatly affect the purchase price. the connector tables in this catalog include construction details that allow you to select con- nectors that meet your requirements at the lowest price. commercial designs use lower cost materials, such as zinc diecast bodies, polypropylene insulators and silver-plated contacts. specific details of connector construction are listed in each product section of this catalog. the materials used affect both performance and cost. common base metals include brass, beryllium copper and stainless steel. the most common plating used for the cen- ter contact is gold because of its low contact resistance, superior mating properties and corrosion resistance. teflon, polypropylene and polymethylpentene (tpx) are the most common connector dielectrics. teflon offers the lowest loss, the most stable electrical properties and high- est operating temperature. but since it cannot be injection molded, manufacturing is more costly than other materials. be certain, when specifying connectors, that the tempera- ture and voltage limitations are taken into consideration. assembly there are several methods of assembly or termination, but they can be categorized into two major areas: (1) solder center conductor and clamp braid (category a) and (2) crimp center conductor and crimp braid. other methods are derived from combinations of the above, (e.g., solder center conductor and crimp braid. method (1) (category a) is generally used where no specialized tools are avail- able, such as with field installations. with the development of low cost assembly tools, method (2) is becoming more popular for field installation. crimping is preferred in most manufacturing environments where assembly tooling is available because terminations can be made in the least amount of time and with the greatest reliability. the design of crimp tools assures that every termination is made the same; this cannot be done with a clamp design without further testing or inspection. figure 4 illustrates the difference between braid crimping using amp ??crimp and the industry-standard hex crimp. the amp ??crimp gives a more consistent pressure on the outer collar. in addition, the crimp of the center con- ductor provides superior vswr as shown in figure 5. benefits derived by using amp ??crimp: no soldering of center contact is required. this allevi- ates all prospective problems associated with the sol- dering process such as excess solder, cold solder joints and overheating the dielectric. fewer parts resulting in less assembly errors braid crimping which eliminates the need for the combing, screwing and torquing associated with the braid clamp. rg-8 rg-6 n rg-59/62 rg-58/142 bnc/tnc sma rg-180 smb/c rg-188 rg-178 cable type connector 0 0.1 0.2 diameter (inches) 0.3 0.4 0.5 figure 3 teflon is a trademark of e.i. dupont de nemours and company. tpx is a trademark of mitsui chemicals america, inc.
7 catalog 1307191 dimensions are in millimeters dimensions are shown for usa: 1-800-522-6752 south america: 55-11-2103-6000 revised 3-07 and inches unless otherwise reference purposes only. canada: 1-905-470-4425 hong kong: 852-2735-1628 specified. values in brackets specifications subject mexico: 01-800-733-8926 japan: 81-44-844-8013 www.tycoelectronics.com are standard equivalents. to change. c. america: 52-55-1106-0803 uk: 44-8706-080-208 rf coax connectors 7-16 series connectors product facts designed for cellular base- stations, control component, antenna and broadcast applications a vailable in white bronze plating minimizes intermodulation distortion by the use of non-ferrous materials hex knurl for wrench tightening a vailable for several popular rg cable sizes in solder-clamp and crimp- crimp attachment styles t yco electronics offers a comprehensive range of 7-16 connectors to suit todays challenging wireless infrastructure market. this market demands reliable, intermodulation sensitive connectors that accommo- date higher power. t yco electronics 7-16 coaxial connector series provides reliable, intermod- ulation- minimizing solutions that also provide a logical alternative to n series con- nectors in high power appli- cations where a more rugged interface design is r equired. typical examples of this include transmitter to antenna links and channel switching networks. the 7-16 series conforms to cecc 22190 and iec 169-4 specification standards and has a 2.7kv working voltage at the connector interface and maximum power handling capability of 4kw. the series has been designed for these demanding environments and can withstand a mini- mum of 500 mating cycles. popular rg cable sizes are covered in both solder/clamp and crimp attachment styles. two piece combination connec- tors adapt to straight or right-angle configurations, minimizing the number of different part codes needed by the customer. series n to 7-16 between series adapters facilitate the transi- tion between system inter- faces as well as providing a test interface. the increased customer demand for greater channel capacity combined with increased sensitivity of r eceivers has exposed the imd (intermodulation distortion) phenomenon. to address this problem 7-16 connectors have been designed to reduce imd through the use of non- ferrous base materials and by silver plating of the elec- trical path. the proprietary white bronze plating tech- nique is standard, providing high corrosion resistance, low porosity, scratch r esistance, low rf loss and a non-magnetic finish. incorporation of hex-knurl coupling nuts allow for hand or wrench tightening of connectors, depending upon the application. t yco electronics is a global iso 9001 certified manufacturer and maintains a complete in-house intermodulation testing facility. connector part numbers shown form just a small part of the extensive interconnect package that t yco electronics offers for the professional wireless and telecom markets. related product data n connectors pages 20-25 application notes white bronze ?appendix b intermodulation ?appendix c between series adapters for 7-16 series between series adapters, see pages 251-260.
8 catalog 1307191 dimensions are in millimeters dimensions are shown for usa: 1-800-522-6752 south america: 55-11-2103-6000 revised 3-07 and inches unless otherwise reference purposes only. canada: 1-905-470-4425 hong kong: 852-2735-1628 specified. values in brackets specifications subject mexico: 01-800-733-8926 japan: 81-44-844-8013 www.tycoelectronics.com are standard equivalents. to change. c. america: 52-55-1106-0803 uk: 44-8706-080-208 rf coax connectors 7-16 series connectors (continued) materials f emale contacts (inner and outer) beryllium copper other metal parts brass insulators fluorocarbon polymer gaskets silicone rubber finishes pa r ts in the electrical path silver over copper other metal parts white bronze electrical f requency range dc-7ghz impedance 50 ohms insulation resistance 10,000 megohms minimum 2.7kv (connector) maximum working voltage rms (sea level) 1.4kv (versions for rg 213, 214 and 393) maximum proof voltage rms (sea level) 2.7kv (connector) 1.4kv (versions for rg 213, 214 and 393) center contact resistance 0.8 milliohm (max.) after conditioning insertion loss <1.5db to 5 ghz vswr 1.02 + 0.03f up to 7 ghz where f is measured in ghz intermodulation better than ?50dbc mechanical coupling torque 18.5 ?22 ft.-lbs. proof torque 25 ft.-lbs. mechanical endurance 500 mating cycles environmental t emperature rating ?5? to +155? general specifications
9 catalog 1307191 dimensions are in millimeters dimensions are shown for usa: 1-800-522-6752 south america: 55-11-2103-6000 revised 3-07 and inches unless otherwise reference purposes only. canada: 1-905-470-4425 hong kong: 852-2735-1628 specified. values in brackets specifications subject mexico: 01-800-733-8926 japan: 81-44-844-8013 www.tycoelectronics.com are standard equivalents. to change. c. america: 52-55-1106-0803 uk: 44-8706-080-208 rf coax connectors 7-16 series connectors (continued) straight cable plug solder/solder ? 32.00 0.20 [1.260 .008 ] 50.35 0.50 [ 1.982 .020 ] 4.50 [.177] typ. 23.50 [.925] typ. ? 16.50 0.20 [.650 .008 ] cable type body plating part no. 1/2" corrugated white bronze/ 1460159-1 gold 43.5 [1.71] 32.0 [1.26] dia. cable type body plating part no. rg 8a/u, rg 213/u white bronze 6331959-1 rg 9b/u, rg 214/u white bronze 6362765-1 43.0 [1.69] 34.3 [1.35] 32.0 [1.26] dia. 36.0 [1.42] assembled cable type body plating part no. rg 58c/u, rg 141a/u white bronze 6408028-1 rg 213/u white bronze 6408030-1 rg 214/u white bronze 6312113-1 36.0 [1.42] 32.0 [1.26] 43.0 [1.69] right-angle cable plug solder/crimp straight cable plug crimp/crimp note: pa rt numbers are rohs compliant except: indicates non-rohs compliant.
10 catalog 1307191 dimensions are in millimeters dimensions are shown for usa: 1-800-522-6752 south america: 55-11-2103-6000 revised 3-07 and inches unless otherwise reference purposes only. canada: 1-905-470-4425 hong kong: 852-2735-1628 specified. values in brackets specifications subject mexico: 01-800-733-8926 japan: 81-44-844-8013 www.tycoelectronics.com are standard equivalents. to change. c. america: 52-55-1106-0803 uk: 44-8706-080-208 rf coax connectors cable type body plating part no. rg 8a/u, rg 213/u white bronze 6408032-1 rg 9b/u, rg 214/u white bronze 6408033-1 44.0 [1.73] 46.5 [1.83] 24.8 [0.98] 17.2 [0.68] 5.00 [0.20] assembled 24.8 [0.98] 29.5 [1.16] dia. 3.70 [0.15] dia 4 holes. mounting detail straight panel mount cable jacks crimp/crimp panel socket launcher body plating part no. white bronze 6311225-1 white bronze 1460052-2 21.6 [0.85] 5.00 [0.20] 24.8 [0.98] 24.8 [0.98] 29.5 [1.16] dia. 3.70 [0.15] dia 4 holes. mounting detail 7-16 series connectors (continued) right-angle cable plug solder/clamp 43.0 [1.69] 32.0 [1.26] 23.2 [0.91] cable type body plating part no. rg 55b/u, rg 58c/u, rg 141a/u, rg 142b/u, white bronze 6408026-1 rg 223/u, rg 400/u t -flex 402 silver 6328873-1 43.0 [1.69] 32.0 [1.26] dia. 47.2 [1.86] cable type body plating part no. rg 213/u, rg 214/u, rg 393/u white bronze 6408027-1 rg 8a/u, rg 9b/u, rg 213/u, rg 214/u white bronze 6408038-1 note: pa rt numbers are rohs compliant except: indicates non-rohs compliant.
7-16 series connectors (continued) right-angle panel jack solder/clamp 46.3 [1.82] 24.8 [0.98] 17.2 [0.68] 5.00 [0.20] 24.8 [0.98] 29.5 [1.16] dia. 47.2 [1.86] 3.70 [0.15] dia 4 holes. mounting detail cable type body plating part no. rg 213/u, rg 214/u, rg 393 white bronze 6408036-1 rg 58c/u, rg 142b/u, rg 223/u, rg 400/u white bronze 6363527-1 46.3 [1.82] 24.8 [0.98] 17.2 [0.68] 5.00 [0.20] 34.2 [1.35] 24.8 [0.98] 29.5 [1.16] dia. 36.7 [1.44] assembled 3.70 [0.15] dia 4 holes. mounting detail cable type body plating part no. rg 55b/u, rg 142b/u, rg 233/u, rg 400/u white bronze 6363524-1 rg 8a/u, rg 213/u white bronze 6363525-1 rg 9b/u, rg 214/u white bronze 6363526-1 combination panel jack solder/crimp 11 catalog 1307191 dimensions are in millimeters dimensions are shown for usa: 1-800-522-6752 south america: 55-11-2103-6000 revised 3-07 and inches unless otherwise reference purposes only. canada: 1-905-470-4425 hong kong: 852-2735-1628 specified. values in brackets specifications subject mexico: 01-800-733-8926 japan: 81-44-844-8013 www.tycoelectronics.com are standard equivalents. to change. c. america: 52-55-1106-0803 uk: 44-8706-080-208 rf coax connectors 49.0 [1.93] 33.0 [1.30] 14.0 [0.55] 45.0 [1.77] max panel body plating part no. white bronze 6408037-1 bulkhead adapter jack/jack note: pa rt numbers are rohs compliant except: indicates non-rohs compliant.
12 catalog 1307191 dimensions are in millimeters dimensions are shown for usa: 1-800-522-6752 south america: 55-11-2103-6000 revised 3-07 and inches unless otherwise reference purposes only. canada: 1-905-470-4425 hong kong: 852-2735-1628 specified. values in brackets specifications subject mexico: 01-800-733-8926 japan: 81-44-844-8013 www.tycoelectronics.com are standard equivalents. to change. c. america: 52-55-1106-0803 uk: 44-8706-080-208 rf coax connectors lightning and emp protection devices product facts cellular operator protection against emp (electro- magnetic pulses) caused by lightning strikes t wo different categories: surge protectors and quarter wave stub tuners for use in cellular infra- structure including gsm, dcs 1800, and pcs 1900 systems incorporates gas discharge t ube (gdt) technology t yco electronics has devel- oped a unique series of lightning and emp protec- tion devices for use in cellu- lar infrastructure including gsm, dcs 1800, and pcs 1900 systems. these devices are designed to offer the cellular operator protection against emp (electro-magnetic pulses) caused by lightning strikes. direct or even near strikes produce fast rising electric fields within micro-seconds. these fields generate high voltage pulses through unprotected antennas and transmission lines which lead to the primary commu- nication equipment. high voltage pulses can cause extensive damage leading to costly repairs as well as significant loss of service to subscribers. these protec- tive devices come in two different categories: surge protectors and quarter wave stub tuners. to ensure that proper, low level contact resistance is established between the lp device and mounting wall, it is recommended that a min- imum torque of 50 in/lbs / 5.65 n/m be applied to tighten the connector mounting nut. a recom- mended minimum torque of 35 in/lbs / 3.95 n/m should also be applied for installa- tion of replacement surge protector capsules to ensure proper protection performance. in order to ensure that r esultant currents from light- ning or emp strikes do not interfere with parallel transmission lines within protected electronic equip- ment, surge protector devices must be installed with proper orientation. the surge protector side of the device should be mounted in the unprotected side of the equipment while the mounting nut is posi- tioned internally in the protected area. it is important when plan- ning lightning protection, that the user can estimate the potential number of direct strikes. this informa- tion may influence the type of device selected or the r equirement for routine maintenance checks. significant attention must be paid to the height of sup- porting structure as this, when related to the typical number of thunderstorms in a particular region, allows us to estimate the probabil- ity of a direct strike taking place. to assist our cus- tomers in this, the following table and chart has been included in this note. this should enable lightning pro- tection planners to establish the likelihood of direct strikes across a network anywhere in the world. detailed application notes are available for proper selection of lightning pro- tection devices (surge pro- tectors & stub tuners) as well as intermodulation and white bronze plating. number of thunderstorm hmax/m hmax/m hmax/m days per year 10% 20% 50% 05 28 39 61 10 18 26 40 15 14 20 31 20 12 17 26 30 9.4 13 20 40 7.9 11 17 50 6.9 9.5 15 70 5.6 8.0 12 90 4.8 7.0 10.6 130 3.9 5.5 8.5 150 3.5 5.0 7.7 180 3.1 4.4 6.9 tab le 1: maximum height of supporting building for a given number of thunderstorm days (when hmax is exceeded, probability of direct strike to supporting building within 15 years is greater than 10% for hmax values given in second column, 20% for hmax values given in third column and 50% for hmax values given in the fourth column). selecting your rf coaxial lightning protection device between series adapters for 7-16 series and n series between series adapters, please see pages 251-260.
13 catalog 1307191 dimensions are in millimeters dimensions are shown for usa: 1-800-522-6752 south america: 55-11-2103-6000 revised 3-07 and inches unless otherwise reference purposes only. canada: 1-905-470-4425 hong kong: 852-2735-1628 specified. values in brackets specifications subject mexico: 01-800-733-8926 japan: 81-44-844-8013 www.tycoelectronics.com are standard equivalents. to change. c. america: 52-55-1106-0803 uk: 44-8706-080-208 rf coax connectors surge protectors advantages broadband allows dc bias on the transmission line. (critical for applications using mast top electronics.) no harmonic passband ease of retrofitting antenna sights gdt easily accessible for replacement limitations routine maintenance recommended 3 ghz maximum frequency initial pass-through voltage selection of a lightning protection device at right are the basic advantages and limitations for both types of protection to use in the proper selec- tion for your application. these devices incorporate gas discharge t ube (gdt) technology. a gdt is a hermetically sealed tube containing an inert gas. the tube is inserted in the side of the device through an easily accessible weather sealed port. during normal operation the tube is inactive. when an installation is struck by lightning, a high voltage impulse will appear on the coaxial line. as the impulse amplitude rises, a level is reached where the impulse surpasses the dynamic voltage threshold of the tube and the electrodes arc over to discharge the energy to ground. prior to activation of the tube, there will be a short period of time where energy will be present on the line. this r esidual pulse is equal to the dynamic voltage threshold of the tube. the maxi- mum impulse voltage a tube can handle without discharging is referred to as the impulse sparkover voltage . this capacity of the gdt is quoted as follows: characteristic symbol definition impulse t ypical v alue impulse dynamic sparkover u zdyn v oltage 1kv/ s 650v v oltage threshold in the case of the referenced chart, the voltage will rise at one kilovolt per microsecond and the tube will fire after 650 nanoseconds. during activation a small percentage of voltage (called arc voltage) will still pass through. this will be approxi- mately 30 volts. when the pulse subsides, the tube again becomes inactive leaving a small r esidual voltage on the line. a direct lightning strike results in an impulse current of high amplitude. the capability of a device to protect a system is defined as the impulse discharge current rating. this is defined as the peak current of an impulse which the device can withstand ten times (5 at each polarity at fixed intervals) without affecting the device. maximum impulse discharge current is the peak current of an impulse the device can withstand once. surge protectors are often used in applica- tions requiring a standing dc line voltage. this is typical in applications with mast top electronics. the maximum voltage capacity of a surge protector prior to it surpassing the static voltage threshold and discharg- ing it to ground is defined as its d.c. product facts excellent for broadband frequency applications field replaceable gas discharge tube a vailable interfaces facilitate retrofit capabilities low vswr up to 2.5ghz specialized white bronze finish
14 catalog 1307191 dimensions are in millimeters dimensions are shown for usa: 1-800-522-6752 south america: 55-11-2103-6000 revised 3-07 and inches unless otherwise reference purposes only. canada: 1-905-470-4425 hong kong: 852-2735-1628 specified. values in brackets specifications subject mexico: 01-800-733-8926 japan: 81-44-844-8013 www.tycoelectronics.com are standard equivalents. to change. c. america: 52-55-1106-0803 uk: 44-8706-080-208 rf coax connectors surge protectors (continued) sparkover voltage . this capacity is quoted as follows: characteristic symbol definition impulse t ypical v alue d.c. static sparkover u zstat v oltage n/a 230v v oltage threshold in these applications it is important to select a device that will assure the tube can return to its inactive state after the passage of a surge. this feature of the surge protector is known as the holdover voltage . if the device continues to conduct, the protected line will be short circuited and the tube will heat up (glow mode). if left in this state, the tube can overheat and destruct. gdts have a finite life span which is inversely proportional to the energy dissipated. at extremes it is possible to r each a level where the tube is unable to discharge all the energy and is destroyed. it is therefore necessary to schedule rou- tine maintenance checks and periodically r eplace the tube within the surge protector. surge protectors offer excellent lightning protection for broadband systems and are usable up to 3 ghz. standard interfaces include 7-16, n, and sma. configurations include straight and bulkhead mounted adapters which allows for ease of assimila- tion into existing systems. requirement detail electrical f requency range dc to 3ghz impedance 50 ? vswr performance 1.33:1 insertion loss (typical) 0.45db impulse discharge current (8/20?, multiple strike) 20ka maximum impulse discharge current (8/20?, single strike) 50ka dynamic sparkover voltage, nemp (1kv/?) 2,000v dynamic sparkover voltage, lemp (1kv/?) 800v dynamic sparkover voltage, static (<100v/?) 90v* materials body parts brass gaskets silicone rubber f emale contacts beryllium copper male contacts brass insulators p.t.f.e. environmental operating temperature range -45 c to +85 c relative humidity up to 100% * determined by gas tube used, can be higher than value shown. specifications frequency range dc to 3ghz contact plating gold body plating white bronze max panel 10.00mm compliant with cecc22210/ cec22110 coupling torque 0.7-1.1nm proof torque 1.7nm both ends endurance 500 matings recommended mounting hole 53.8 [2.12] 13.6 [0.54] ref. 25.4 [1.00] sq. 21.5 [0.85] ref. 14.0 [0.55] 16.0 [0.63] dia. n series jack to sma bulkhead jack adapter part number 6312079-1 note: pa rt numbers are rohs compliant except: indicates non-rohs compliant.
15 catalog 1307191 dimensions are in millimeters dimensions are shown for usa: 1-800-522-6752 south america: 55-11-2103-6000 revised 3-07 and inches unless otherwise reference purposes only. canada: 1-905-470-4425 hong kong: 852-2735-1628 specified. values in brackets specifications subject mexico: 01-800-733-8926 japan: 81-44-844-8013 www.tycoelectronics.com are standard equivalents. to change. c. america: 52-55-1106-0803 uk: 44-8706-080-208 rf coax connectors surge protectors (continued) frequency range dc to 3.0 ghz contact plating gold body plating white bronze max panel 10.00mm compliant with cecc22210 coupling torque 0.7-1.1 nm proof torque 1.7 nm endurance 500 matings recommended mounting hole 53.8 [2.12] ref. 25.4 [1.00] sq. 16.0 [.063] dia. 13.6 [.054] n series jack to n series bulkhead jack adapter part number 6312138-1 frequency range dc to 3.0 ghz contact plating silver body plating white bronze compliant with cecc22190 coupling torque 25 - 30 nm proof torque 35nm endurance 500 matings 31.9 [1.25] 56.5 [2.23] ref. 34.0 [1.34] dia. ref. 7-16 plug to 7-16 jack adapter part number 6312121-1 d.c. sparkover voltage: 230v 46v impulse sparkover voltage: 700v typ. (1kv/ms) (900v max) glow discharge voltage: 72v arc discharge voltage: 10v a.c. discharge current: 20a (1 sec, 50hz) impulse discharge current: 20ka (50ka for (8/20ms waveform) one strike) insulation resistance (@100v): 10gw capacitance: 2pf gas discharge tube replacement part number 1402314-1 note: pa rt numbers are rohs compliant except: indicates non-rohs compliant.
/4 stub tuners 16 catalog 1307191 dimensions are in millimeters dimensions are shown for usa: 1-800-522-6752 south america: 55-11-2103-6000 revised 3-07 and inches unless otherwise reference purposes only. canada: 1-905-470-4425 hong kong: 852-2735-1628 specified. values in brackets specifications subject mexico: 01-800-733-8926 japan: 81-44-844-8013 www.tycoelectronics.com are standard equivalents. to change. c. america: 52-55-1106-0803 uk: 44-8706-080-208 rf coax connectors these devices are three port coaxial connectors. the third port extending from the main through path is terminated in a short circuit at a pre-deter- mined distance calculated to be exactly one quarter wave- length at the desired center frequency (see graph). unlike surge protectors, this design eliminates concerns about residual pulse, sparkover voltage and resid- ual voltage ensuring greater protection for sensitive electronic equipment. as opposed to surge protec- tors, stub tuners will absorb lightning strikes without need for replacing compo- nents. these devices yield very low vswr and feature high attenuation within a rel- atively narrow pass-band (+/- 70 mhz) but are appli- cation specific. stub tuners also pass energy in bands that are harmonically related to the fundamental center frequency. the graphs below show a typical test impulse and the response of a stub tuner. stub tuners are classified into two broad categories simple and broadband. the simple stub tuner exhibits a v- shaped response on the vswr vs. frequency plot. the trough of the v is designed to occur at the r equired fo and the band- width is restricted to approx- imately 8%. the broadband tuner employs extra rf tech- niques, similar to multiple cavity filtering, which increase the effective band- width by approximately 20%. t yco electronics offers a wide variety of stub tuners for the most popular fre- quency bands to facilitate purchase without need for custom design and manu- facturing. designs exist for gsm, pcs 1900, dcs 1800 frequencies with standard industry interfaces includ- ing sma, 7-16, and type n. configurations include cable assemblies, cabled connectors, and adapters for ease of assimilation into existing systems. stub tuners are maintenance free since they incorporate no active components though it is recommended that a check of the stub tuner affixment be made following heavy discharges at an installation. product facts ideal for use with gsm, pcs and dcs maintenance free operation low vswr within specified bandwidth configurations include direct attachments to cable variants optional white bronze finish l i v i v r l r 0.3 1.0 1.9 0.5 0 v t 1 = 1.67t t 2 t 0 1 t 1 t 326.400 110.308 vka 244.800 94.5588 vka 163.200 78.8088 vka 81.6000 63.0588 vka 0.0 47.3088 uv ka -81.600 31.5588 vka -163.20 15.8088 vka -244.80 58.80 va -326.40 -15.691 vka -640.0ns, 80.033280 v 10.98us, 49.45920ka 0.0ns 20.00us 40.00us 60.00us 80.00us 0.0ns 20.00us 40.00us 60.00us 80.00us /4 shorting stub basics t ypical test impulse t ypical /4 test response advantages low vswr in pass- band minimal maintenance pass-through voltage eliminated no sparkover or resid- ual voltage concerns ease of retro-fitting antenna sights limitations frequency specific harmonic passband does not allow dc bias on transmission line
/4 stub tuners (continued) 17 catalog 1307191 dimensions are in millimeters dimensions are shown for usa: 1-800-522-6752 south america: 55-11-2103-6000 revised 3-07 and inches unless otherwise reference purposes only. canada: 1-905-470-4425 hong kong: 852-2735-1628 specified. values in brackets specifications subject mexico: 01-800-733-8926 japan: 81-44-844-8013 www.tycoelectronics.com are standard equivalents. to change. c. america: 52-55-1106-0803 uk: 44-8706-080-208 rf coax connectors requirement detail (type-n, 7-16) electrical impedance 50 ? vswr performance in band 1.2:1 insertion loss (typical) 0.2db dc resistance (stub outer to inner) 1m ? dynamic voltage @ 250a/ms 15v residual voltage @ 2500a, 8/20? 15v outer conductor contact resistance 10m ? dc resistance (through-path center contact) 100m ? materials body parts brass gasket silicone rubber f emale contacts beryllium copper male contacts brass insulators p.t.f.e. environmental operating temperature range -45? to +85? relative humidity (non-condensing) up to 100% bandwidth 70 mhz center frequency 1795 mhz contact plating silver body plating silver max panel 10.00mm compliant with cecc22210 coupling torque 0.7-1.1nm proof torque 1.7nm endurance 500 matings recommended mounting hole 62.9 [2.48] 25.4 [1.00] sq. ref. 16.0 [0.63] dia. 23.5 [0.92] ref. 54.7 [2.15] ref. 13.6 [0.54] 42.0 [1.65] ref. dcs 1800 t ype n clamp bulkhead jack cable part no. t -flex402 6329818-1 bandwidth 70 mhz center frequency 1795 mhz contact plating silver body plating white bronze max panel 8.00mm compliant with cecc22190 coupling torque 25 - 30nm proof torque 35nm endurance 500 matings recommended mounting hole 77.6 [3.06] ref. 44.6 [1.76] ref. 67.0 [2.64] ref. 44.9 [1.77] 30.5 [1.20] 3.20 [0.13] 17.5 [0.69] dia. ref. 7-16 jack to 7-16 bulkhead jack adapter part number 6361137-1 note: pa rt numbers are rohs compliant except: indicates non-rohs compliant.
/4 stub tuners (continued) 18 catalog 1307191 dimensions are in millimeters dimensions are shown for usa: 1-800-522-6752 south america: 55-11-2103-6000 revised 3-07 and inches unless otherwise reference purposes only. canada: 1-905-470-4425 hong kong: 852-2735-1628 specified. values in brackets specifications subject mexico: 01-800-733-8926 japan: 81-44-844-8013 www.tycoelectronics.com are standard equivalents. to change. c. america: 52-55-1106-0803 uk: 44-8706-080-208 rf coax connectors bandwidth 70 mhz center frequency 1795 mhz contact plating silver body plating silver max panel 10.00mm compliant with cecc22210 coupling torque 0.7-1.1nm proof torque 1.7nm endurance 500 matings recommended mounting hole 62.9 [2.48] 23.5 [0.92] ref. 25.4 [1.00] sq. 42.0 [1.65] ref. 54.7 [2.15] ref. 16.0 [0.63] 13.6 [0.54] ref. dia. dcs 1800 (continued) t ype n crimp bulkhead jack cable part no. rg58c/u 1329819-1 pcs 1900 bandwidth 70 mhz center frequency 1920 mhz contact plating silver body plating silver max panel 10.00mm compliant with cecc22210 coupling torque 0.7-1.1nm proof torque 1.7nm endurance 500 matings recommended mounting hole 62.9 [2.48] 25.4 [1.00] sq. ref. 16.0 [0.63] dia. 23.5 [0.92] ref. 52.9 [2.08] ref. 13.6 [0.54] 40.2 [1.58] ref. t ype n clamp bulkhead jack cable part no. t -flex 402 1312137-1 bandwidth 70 mhz center frequency 1795 mhz contact plating silver body plating silver max panel 10.00mm compliant with cecc22210 coupling torque 0.7-1.1nm proof torque 1.7nm endurance 500 matings recommended mounting hole 57.3 [2.26] 25.4 [1.00] sq. ref. 16.0 [0.63] dia. 23.5 [0.93] ref. 10.0 [0.39] 54.7 [2.15] ref. 13.6 [0.54] 42.0 [1.65] ref. t ype n jack to type n bulkhead jack adapter part number 1361138-1 bandwidth 70 mhz center frequency 925 mhz contact plating silver body plating white bronze max panel 8.00mm compliant with cecc22190 coupling torque 25 - 30nm proof torque 35nm endurance 500 matings recommended mounting hole 77.6 [3.06] 44.9 [1.77] ref. 27.4 [10.8] ref. 93.4 [3.68] ref. 30.5 [1.20] 17.5 [0.69] 71.0 [2.79] ref. dia. dia. ref. gsm 7-16 bulkhead jack to 7-16 bulkhead jack cable part no. t -flex 402 cable 6408399-1 note: pa rt numbers are rohs compliant except: indicates non-rohs compliant.
/4 stub tuners (continued) 19 catalog 1307191 dimensions are in millimeters dimensions are shown for usa: 1-800-522-6752 south america: 55-11-2103-6000 revised 3-07 and inches unless otherwise reference purposes only. canada: 1-905-470-4425 hong kong: 852-2735-1628 specified. values in brackets specifications subject mexico: 01-800-733-8926 japan: 81-44-844-8013 www.tycoelectronics.com are standard equivalents. to change. c. america: 52-55-1106-0803 uk: 44-8706-080-208 rf coax connectors bandwidth 70 mhz center frequency 1920 mhz contact plating silver body plating silver max panel 10.00mm compliant with cecc22210 coupling torque 0.7-1.1nm proof torque 1.7nm endurance 500 matings recommended mounting hole 62.9 [2.48] 25.4 [1.00] sq. ref. 16.0 [0.63] dia. 23.5 [0.92] 52.9 [2.08] ref. 13.6 [0.54] 40.2 [1.58] ref. pcs 1900 (continued) t ype n crimp bulkhead jack cable part no. rg58 c/u 6312139-1 bandwidth 1920 mhz center frequency 70 mhz contact plating silver body plating silver max panel 8.00mm compliant with cecc 22190 coupling torque 25-30 nm proof torque 35 nm endurance 500 matings recommended mounting hole 38.0 [1.50] 72.7 [2.86] 24.6 [0.97] ref. 4.00 [0.16] dia. ref. 27.4 [1.08] ref. 29.5 [1.16] dia. 27.5 [1.08] 40.2 [1.58] ref. ref. ref. 7-16 clamp bulkhead jack cable part no. t -flex402 6312123-1 bandwidth 1920 mhz center frequency 70 mhz contact plating silver body plating white bronze max panel 8.00mm compliant with cecc 22190 coupling torque 25-30 nm proof torque 35 nm endurance 500 matings recommended mounting hole 77.6 [3.06] ref. 44.9 [1.77] 17.5 [0.69] 30.5 [1.20] 42.2 [1.66] ref. 64.6 [2.54] ref. dia. ref. 7-16 bulkhead jack to 7-16 bulkhead jack adapter part number 6312124-1 bandwidth 70 mhz center frequency 1920 mhz contact plating silver body plating silver max panel 10.00mm compliant with cecc22210 coupling torque 0.7-1.1nm proof torque 1.7nm endurance 500 matings recommended mounting hole 57.3 [2.26] 13.6 [0.54] ref. 25.4 [1.00] sq. 40.0 [1.58] ref. 52.7 [2.08] ref. 16.0 [0.63] dia. t ype n bulkhead jack to t ype n bulkhead jack adapter part number 6361139-1 note: pa rt numbers are rohs compliant except: indicates non-rohs compliant.
20 catalog 1307191 dimensions are in millimeters dimensions are shown for usa: 1-800-522-6752 south america: 55-11-2103-6000 revised 3-07 and inches unless otherwise reference purposes only. canada: 1-905-470-4425 hong kong: 852-2735-1628 specified. values in brackets specifications subject mexico: 01-800-733-8926 japan: 81-44-844-8013 www.tycoelectronics.com are standard equivalents. to change. c. america: 52-55-1106-0803 uk: 44-8706-080-208 rf coax connectors n series connectors the tyco electronics n connector, featuring a 15.88 [5/8] - 24 threaded coupling for optimum stability, is highly suited for critical applications and environments. this medium sized connector can with- stand shock and vibration to assure a low noise level and has a constant impedance of 50 ohms. it also features a captive center contact and provides excellent per- formance at frequencies up to 11 ghz, with voltages to 1000 volts rms. this tyco electronics con- nector offers the added benefits of low overall applied cost with a labor- saving two-crimp assembly. the contact is simply crimped to the cables center conductor, then both braid and cable support are simultaneously crimped to complete the termination. n series connectors are available in standard plug, jack, panel jack, bulkhead jack and right-angle plug configurations. those connectors with a military designation (m39012) are furnished in accordance with all r equirements of specifica- tion mil-c-39012, class ii, category b. materials brass qq-b-626 beryllium copper qq-c-530 dielectric teflon teflon ? il-p-19468 copper, annealed qq-c-576 phosphor bronze qq-b-750 silicone rubber zz-r-765 plating body silver per qq-s-365 nickel per qq-n-290 center contact gold per mil-b-45204 electrical characteristics nominal impedance 50 ohms w orking voltage 1000 volts, rms at sea level frequency range ? to 11 ghz v oltage standing wave ratio (vswr) straight plug or jack ?1.3:1 max. right-angle plug ? 1.35 max. at 0 to 9.0 ghz 1.50 max. at 9.0 to 11.0 ghz contact resistance outer contact 0.2 milliohms center contact 1.0 milliohms right-angle 2.5 milliohms insulation resistance 5000 megohms min. dielectric withstanding voltage 2500 volts, rms at sea level rf leakage ? il type, -90 db min. at 2 to 3 ghz rf insertion loss ? il type, 0.15 db max. at 10 ghz right-angle plug, 0.3 db max. at 10 ghz corona level ? il type, 500 volts min. at 21 336 m [70,000 ft.] te rminator resistance 50 ohms ?% power rating 1.0 watt max. product facts designated connectors are mil-c-39012, class ii, category b qualified captive center contacts completely crimpable application ?one hand tool crimps all cables with single or double braided shields of a given size impedance matching crimps broad band performance low vswr superior cable retention teflon dielectric silver or nickel finish fully intermateable with mil-c-39012 connectors listed under the component program of underwriters laboratories inc., file no. e81956 recognized under the component program of underwriters laboratories inc., file no. e81956 certified by canadian standards association file no. lr 7189 r r r mechanical characteristics mating/unmating threaded cou- pling cable attachmen t crimp type - center contact and braid coupling nut retention 445 n [100 lbs.] min. cable retention 400 n [90 lbs.] min. rg 214/u cable durability 500 cycles per mil-c- 39012 captive contact 27 n [6 lbs.] min. axial retention, either direction environmental characteristics t emperature range mil type, -65? to +165? commercial, -55? to +85? vibration mil-std-202, method 204, test cond. b shock mil-std-202, method 213, t est cond. i moisture resistance mil-std- 202 method 106 salt spray mil-std-202, method 101, test cond b t emperature cycling ? il-std- 202, method 107, test cond. b (except high temperature is +85?) note: all data pertains to use with mil-c- 39012 specified cables only. between series adapters for n series between series adapters, see pages 251-260. teflon is a trademark of e.i. dupont de nemours and company.
21 catalog 1307191 dimensions are in millimeters dimensions are shown for usa: 1-800-522-6752 south america: 55-11-2103-6000 revised 3-07 and inches unless otherwise reference purposes only. canada: 1-905-470-4425 hong kong: 852-2735-1628 specified. values in brackets specifications subject mexico: 01-800-733-8926 japan: 81-44-844-8013 www.tycoelectronics.com are standard equivalents. to change. c. america: 52-55-1106-0803 uk: 44-8706-080-208 rf coax connectors n series connectors, 50 ohm (continued) plugs m39012/ rg/u termination body military no. and/ dim. integral die hex across flats notes part no. cable type plating or comments l hand tool center braid o crimp nickel knurl collar 42.85 220045-2 1 1-5225661-2 58, 58a, 1.687 58b, 58c o crimp silver knurl collar 42.85 220045-2 1 5225361-1 1.687 o crimp nickel knurl collar 42.85 220045-2 1 1-5225661-3 223, 1.687 55, 55a, 55b o crimp silver knurl collar 42.85 220045-2 1 5225361-2 1.687 knurl collar 42.85 220045-2 1, 3 5225392-2 142, 142a o crimp silver 1.687 142b, 400 42.85 knurl collar 1.687 220045-2 1 5225361-4 o crimp nickel knurl collar 41.35 220045-2 3 5225699-1 142, 142a 1.628 142b knurl collar 39.40 58436-1 1.73 5.41 2 5415232-4 hex crimp nickel 1.550 .068 .213 115a, belden 89880, o crimp nickel knurl collar 42.85 220015-1 3 5225092-8 9880 1.687 belden 9880 hex crimp nickel knurl collar 39.40 58485-1 2.54 10.90 2 1-415232-0 1.550 .100 .429 402 semi rigid solder nickel knurl collar 24.6 6057088-1 (.141) .970 405 semi rigid solder nickel knurl collar 24.6 6057094-1 (.085) .970 o crimp nickel knurl collar 42.85 220015-1 1-5227086-0 1.687 o crimp nickel knurl collar 42.85 220015-1 5225661-2 8, 8a, 213 1.687 o crimp silver 01b0007 42.85 220015-1 3 51692-2 knurl collar 1.687 o crimp nickel knurl collar 47.22 220015-1 3 5225662-2 1.859 11, 11a, 216 o crimp silver 01b0013 42.85 220015-1 3 51692-4 knurl collar 1.687 belden 9292 o crimp nickel 47.22 220015-1 3 1-5225662-8 1.859 393 hex crimp nickel hex collar 39.40 58485-2 3.25 10.90 2 5414160-5 1.550 .128 .429 belden 8214 o crimp nickel knurl collar 42.85 220015-1 1-5225661-6 1.687 o crimp nickel knurl collar 42.85 220015-1 5225661-1 9, 9a, 9b, 1.687 214 o crimp silver 01b0008 42.85 220015-1 3 51692-1 knurl collar 1.687 9, 214 hex crimp nickel hex collar 39.40 58485-1 2.54 10.90 2 5415232-7 1.550 .100 .429 lmr 240 hex/solder silver hex collar 29.74 6.81 6274532-1 1.171 .268 notes: 1 hand tool 69710-1, with die insert 220062-1, is available to terminate these connectors. the 626 pneumatic tool system can also be used. 2 die set crimp tool ?pro-cri mper ii hand tool, p/n 354940-1 or 626 series pneumatic tool with 679304-1. 3 w eatherproof. l max. 19.05 [.750] dia. max. mil type dual crimp l max. 21.01 [.827] dia. max. semi-rigid cable l max. 21.01 [.827] dia. max. hex dual crimp note: pa rt numbers are rohs compliant except: indicates non-rohs compliant. belden is a trademark of belden wire and cable company.
22 catalog 1307191 dimensions are in millimeters dimensions are shown for usa: 1-800-522-6752 south america: 55-11-2103-6000 revised 3-07 and inches unless otherwise reference purposes only. canada: 1-905-470-4425 hong kong: 852-2735-1628 specified. values in brackets specifications subject mexico: 01-800-733-8926 japan: 81-44-844-8013 www.tycoelectronics.com are standard equivalents. to change. c. america: 52-55-1106-0803 uk: 44-8706-080-208 rf coax connectors n series connectors, 50 ohm (continued) 21.01 [.827] dia. max. 35.86 [ 1.412] max. l max. right-angle plugs, crimp jacks l max. 15.93 [.627] dia. max. m39012/ rg/u termination body military no. and/ dim. integral die hex across flats notes part no. cable type plating or comments l hand tool center braid 58a, 58c hex crimp nickel hex collar 57.79 58436-1 1.73 5.41 1 5415255-1 2.275 .068 .213 142, 142a, hex crimp nickel hex collar 57.79 58436-1 1.73 5.41 1 5415255-2 142b 2.275 .068 .213 o crimp nickel knurl collar 57.79 220015-1 5225669-2 8, 8a, 213 2.275 o crimp silver 05b0002 57.79 220015-1 225014-2 knurl collar 2.275 8, 213 hex crimp nickel hex collar 57.79 58485-1 2.54 10.90 1 5415255-3 2.275 .100 .429 393 o crimp silver knurl collar 62.31 220015-1 1,3 225389-6 2.453 o crimp nickel knurl collar 57.79 220015-1 5225669-1 9, 9a, 9b 2.275 214 o crimp silver 05b0003 57.79 220015-1 225014-3 knurl collar 2.275 9, 214 hex crimp nickel hex collar 57.79 58485-1 2.54 10.90 1 5415255-4 2.275 .100 .429 notes: 1 die assembly compatible with crimp tool ?pro-crimper iii hand tool, p/n 354940-1, 626 series pneumatic tool 1213855-1, sde bat tery tool kit 1725837-1, or sde electric terminator 1490076-2. 3 w eatherproof. m39012/ rg/u termination body military no. and/ dim. integral die hex across flats notes part no. cable type plating or comments l hand tool center braid 58a, 58c o crimp nickel 44.83 220045-2 2, 3 1-5225664-2 1.765 142, 142a, hex crimp nickel 41.28 58436-1 1.73 5.41 2 5415242-2 142b 1.625 .068 .213 8, 8a, o crimp silver 02b0008 49.20 220015-1 3 225093-2 213 1.937 8, 213 o crimp nickel 49.20 220015-1 2, 3 5225664-2 1.937 9, 9a, 9b, o crimp silver 02b0009 49.20 220015-1 225093-1 214 1.937 9, 214 o crimp nickel 49.20 220015-1 2, 3 5225664-1 1.937 393 hex crimp nickel 41.28 58485-1 2.54 10.90 2 5415242-6 1.625 .100 .429 402 semi solder nickel 26.70 6057116-1 rigid (.141) 1.051 notes: 1 hand tool 69710-1, with die insert 220062-1, is available to terminate these connectors. the 626 pneumatic tool system can also be used. 2 die assembly compatible with crimp tool ?pro-crimper iii hand tool, p/n 354940-1, 626 series pneumatic tool 1213855-1, sde bat tery tool kit 1725837-1, or sde electric terminator 1490076-2. 3 w eatherproof. note: pa rt numbers are rohs compliant except: indicates non-rohs compliant.
23 catalog 1307191 dimensions are in millimeters dimensions are shown for usa: 1-800-522-6752 south america: 55-11-2103-6000 revised 3-07 and inches unless otherwise reference purposes only. canada: 1-905-470-4425 hong kong: 852-2735-1628 specified. values in brackets specifications subject mexico: 01-800-733-8926 japan: 81-44-844-8013 www.tycoelectronics.com are standard equivalents. to change. c. america: 52-55-1106-0803 uk: 44-8706-080-208 rf coax connectors n series connectors, 50 ohm (continued) bulkhead jacks, crimp 13.51/13.79 [.532/.543] 16/16.38 [.630/.645] dia. maximum panel thickness 6.35 [.250] recommended panel cutout l max. dia. max. 22.48 [.885] maximum panel thickness 6.35 [.250] recommended panel cutout 16.26 [.640 ] dia. +0.13 -0.25 +.005 -.010 13.72 [.540 ] +0.08 -0.2 +.003 -.008 12.88 [.507 ] dia. +0.08 -0.05 +.003 -.002 5.59 [.220 ] +0.03 -0.05 +.001 -.002 maximum panel thickness 6.35 [.250] recommended panel cutout m39012/ rg/u termination body military no. dim. integral die part no. cable type plating and/or l hand tool comments crimp nickel rear mount 29.37 * 228658-1 1.156 402 solder pass. gold rear mount * 6057159-1 semi-rigid/.141 solder nickel rear mount 25.4 6057176-1 1.00 405 solder nickel rear mount 33.9 6057165-1 semi-rigid/.085 1.335 *toolinghand tool no. 59980-1, requires (2) crimping dies no. 312253-1 and (1) locator no. 220220-2. bulkhead jacks for semi-rigid cable 22.86 [.900] dia. max. l max. 16.1 [.630] dia. max. l max. rear mount hex across flats rg/u termination body dim. integral die notes part no. cable type plating l hand tool center braid 58, 58a, 58b, o crimp silver 49.61 220045-2 1 5225363-1 58c, lmr195 1.953 58a, 58c hex crimp nickel 45.72 58436-1 1.73 5.41 2 5415248-1 1.800 .068 .213 142, 142a, hex crimp nickel 45.72 58436-1 1.73 5.41 2 5415248-7 142b 1.800 .068 .213 124, 140, 210, 62, 62a, 62b, 59, 59a, o crimp nickel 49.61 220045-3 1-5225667-6 59b, belden 9291, 1.953 9209, 9269, 89269 8, 213 o crimp silver 53.98 220015-1 2, 3 225094-2 2.125 393 o crimp nickel 53.98 220015-1 2, 3 1-225668-1 2.125 9, 214 o crimp silver 53.98 220015-1 2, 3 225094-1 2.125 notes: 1 hand tool 69710-1, with die insert 220062-1, is available to terminate these connectors. the 626 pneumatic tool system can also be used. 2 die assembly compatible with crimp tool ?pr o-crimper iii hand tool, p/n 354940-1, 626 series pneumatic tool 1213855-1, sde battery tool kit 1725837-1, or sde electric terminator 1490076-2. 3 w eatherproof. front mount note: pa rt numbers are rohs compliant except: indicates non-rohs compliant. belden is a trademark of belden wire and cable company.
24 catalog 1307191 dimensions are in millimeters dimensions are shown for usa: 1-800-522-6752 south america: 55-11-2103-6000 revised 3-07 and inches unless otherwise reference purposes only. canada: 1-905-470-4425 hong kong: 852-2735-1628 specified. values in brackets specifications subject mexico: 01-800-733-8926 japan: 81-44-844-8013 www.tycoelectronics.com are standard equivalents. to change. c. america: 52-55-1106-0803 uk: 44-8706-080-208 rf coax connectors n series connectors, 50 ohm (continued) 16.25 [.640] 3.17 [.125] dia. (4 holes) min. 18.24 .013 [.718 .005 ] 18.24 .013 [.718 .005 ] recommended p anel cutout panel jacks, solder panel plug, solder jack, panel mount hex across flats rg/u termination body dim. integral die notes part no. cable type plating l hand tool center braid 58a, 58c hex crimp nickel 41.28 58436-1 1.73 5.41 5415252-1 1.625 .068 .213 142, 142a, hex crimp nickel 41.28 58436-1 1.73 5.41 5415252-2 142b 1.625 .068 .213 8, 213 hex crimp nickel 41.28 58485-1 2.54 10.90 5415252-3 1.625 .100 .429 9, 214 hex crimp nickel 41.28 58485-1 2.54 10.90 5415252-4 1.625 .100 .429 rg 225 o crimp silver 49.20 220015-1 3 5225089-4 1.937 note: 3 w eatherproof. body plating part no. ni ckel 1057284-1 ni ckel 1057290-1 * *no solder cup ?dielectric protrudes. body plating part no. ni ckel 1057275-1 ni ckel 1057279-1 * ni ckel 1057277-1 * *no solder cup ?dielectric protrudes. 25.40 [1.000] l max. dia. min. 25.0 [.986] 18.7 [.736] 2.0 [.080] 25.4 [1.000] sq. 9.6 [.377] ref. 18.2 [.718] typ. ? 3.2 [.125] dia. 3.0 [.120] dia. 2.5 [.098] dia. 4 plcs. 27.2 [1.070] 20.8 [.819] 2.0 [.080] 25.4 [1.000] sq. 18.2 [.718] typ. ? 3.2 [.125] ? 2.5 [.098] ? 3.0 [.120] 4 plcs. note: pa rt numbers are rohs compliant except: indicates non-rohs compliant.
25 catalog 1307191 dimensions are in millimeters dimensions are shown for usa: 1-800-522-6752 south america: 55-11-2103-6000 revised 3-07 and inches unless otherwise reference purposes only. canada: 1-905-470-4425 hong kong: 852-2735-1628 specified. values in brackets specifications subject mexico: 01-800-733-8926 japan: 81-44-844-8013 www.tycoelectronics.com are standard equivalents. to change. c. america: 52-55-1106-0803 uk: 44-8706-080-208 rf coax connectors n series connectors, 50 ohm (continued) inter-series adapters feedthru jack adapter (jack-jack) plating body ?nickel dielectric ?general purpose polypropylene contact ?gold plated part number 227945-2 dia. max. 15.93 [.627] max. 45.22 [1.780] t ype body contact dielectric part no. plating ja c k-plug stainless steel/ gold teflon 1057374-1 passivate 50.69 [1.996] jack-plug panel mount jack, press-fit panel mount jack, screw-in body contact dielectric part no. plating white bronze gold ptfe 1460055-1 body contact dielectric part no. plating white bronze gold ptfe 1460118-1 1 white bronze gold ptfe 1460118-2 2 white bronze gold ptfe 1460118-3 3 notes: 1. without tuf-loc adhesive 2. with tuf-loc adhesive around m3 thread 3. with tuf-loc spot on m3 thread 2.50 0.10 [.098 .004 ] 6.00 0.10 [.236 .004 ] ? 15.80 0.10 [.622 .004 ] ? 14.35 0.05 [.565 .002 ] 5/8-24 unef-2a 5.15 0.20 [.203 .008 ] 24.80 0.20 [.976 .008 ] 8.70 0.30 [.343 .012 ] + 0.09 ? 0.05 + .004 ?.002 9.10 [.358 ] 19.00 0.10 [.748 .004 ] hex. 23.30 0.20 [.917 .008 ] 5.00 0.10 [.197 .004 ] 16.30 0.20 [.642 .008 ] m16 x 1 ? 14.90 0.10 [.587 .004 ] 5/8-24 unef-2a note: pa rt numbers are rohs compliant except: indicates non-rohs compliant. teflon is a trademark of e.i. dupont de nemours and company.
26 catalog 1307191 dimensions are in millimeters dimensions are shown for usa: 1-800-522-6752 south america: 55-11-2103-6000 revised 3-07 and inches unless otherwise reference purposes only. canada: 1-905-470-4425 hong kong: 852-2735-1628 specified. values in brackets specifications subject mexico: 01-800-733-8926 japan: 81-44-844-8013 www.tycoelectronics.com are standard equivalents. to change. c. america: 52-55-1106-0803 uk: 44-8706-080-208 quick lock n (qln) series connectors rf coax connectors product facts similar performance and applications to standard n series t ime saving and user friendly snap on/off mating excellent performance to 6 ghz no torquing of connector required free rotation of mated connection higher packaging density can be achieved fully compatible with huber&suhner and radiall qn series qlf connectors* * qn and qlf are registered trademarks of huber&suhner, inc. and radiall s.a.. huber&suhner, inc. and radiall s.a. are not affiliated with the qln product. description snap-on version of the pop- ular n series connector snap-on interface facilitates assembly same dependable performance as standard n connector applications cellular & pcs base stations broadcast equipment t elephony applications, wlan instrumentation and re mote measuring equipment mil aero, satcom, radar related product data internet ?http://tycoelectronics.com/products/rfcoax product specification/design objectives ? 108-2281 material and finish shell ?brass, plated white bronze male pin center contact ?brass, plated gold female socket center contact beryllium copper, plated gold outer contact ?phosphor bronze, plated white bronze insulators ?ptfe or pfa electrical characteristics characteristic impedance ? 50 ohms frequency range ?dc to 6 ghz v oltage standing wave ratio (vswr) ? 1.12 max. dc to 3 ghz insertion loss ? 0.15 db max. dc to 3 ghz rated voltage ?1000 vac rms, 50 hz (at sea level) insulation resistance ? 5000 megohms min. contact resistance ? center contact ?1.5 milliohms max. outer contact ?1.5 milliohms max. mechanical characteristics engagement force ?30 n typical disengagement force ?30 n typical interface retention force ? 450 n min. contact captivation ?28 n min. durability ?100 cycles min. environmental characteristics operating temperature ?0? to +125? (cable dependent) thermal shock ? iec 60169 para. 16.4 corrosion ?mil-std-202, method 101, condition b vibration ?iec-1169-1 para. 9.3.3 (10-500 hz, 5g) ip rating for interface ? ip68 (connector dependent)
27 catalog 1307191 dimensions are in millimeters dimensions are shown for usa: 1-800-522-6752 south america: 55-11-2103-6000 revised 3-07 and inches unless otherwise reference purposes only. canada: 1-905-470-4425 hong kong: 852-2735-1628 specified. values in brackets specifications subject mexico: 01-800-733-8926 japan: 81-44-844-8013 www.tycoelectronics.com are standard equivalents. to change. c. america: 52-55-1106-0803 uk: 44-8706-080-208 quick lock n (qln) series connectors (continued) rf coax connectors semi-rigid cable ? direct solder attachment straight cable plug cable part no. rg 402 1274805-1 34.29 [1.35] ref. bulkhead cable jack cable part no. rg 402 1274806-1 38.10 [1.50] ref. flexible cable ? crimp attachment straight cable plug cable part no. rg 58 1274688-1 rg 142 1274688-2 lmr 240 1274688-3 30.48 [1.20] ref. right-angle cable plug cable part no. rg 58 1274804-1 rg 142 1274804-2 lmr 240 1274804-3 36.58 [1.44] ref. bulkhead cable jack cable part no. rg 58 1274734-1 rg 142 1274734-2 lmr 240 1274734-3 34.54 [1.36] ref. 4-hole square flange cable jack cable part no. rg 58 1274735-1 rg 142 1274735-2 lmr 240 1274735-3 34.54 [1.36] ref. straight cable jack cable part no. rg 58 1274689-1 rg 142 1274689-2 lmr 240 1274689-3 26.92 [1.06] ref. note: pa rt numbers are rohs compliant except: indicates non-rohs compliant.
28 catalog 1307191 dimensions are in millimeters dimensions are shown for usa: 1-800-522-6752 south america: 55-11-2103-6000 revised 3-07 and inches unless otherwise reference purposes only. canada: 1-905-470-4425 hong kong: 852-2735-1628 specified. values in brackets specifications subject mexico: 01-800-733-8926 japan: 81-44-844-8013 www.tycoelectronics.com are standard equivalents. to change. c. america: 52-55-1106-0803 uk: 44-8706-080-208 quick lock n (qln) series connectors (continued) rf coax connectors panel mount receptacles press-fit bulkhead jack receptacle ?solder terminal part number 1274807-1 20.07 [.790] ref. ? 15.24 [.600] ref. 4-hole flange jack receptacle ?solder terminal part number 1274662-1 24.89 [.980] ref. 17.53 [.690] sq. ref. 20.07 [.790] ref. adapters ?between series qln plug to n series jack part number 1274808-1 41.91 [1.65] 9.53 [.375] ref. n series jack qln plug wrench flats ? 18.42 [.725] ref. note: pa rt numbers are rohs compliant except: indicates non-rohs compliant.
29 catalog 1307191 dimensions are in millimeters dimensions are shown for usa: 1-800-522-6752 south america: 55-11-2103-6000 revised 3-07 and inches unless otherwise reference purposes only. canada: 1-905-470-4425 hong kong: 852-2735-1628 specified. values in brackets specifications subject mexico: 01-800-733-8926 japan: 81-44-844-8013 www.tycoelectronics.com are standard equivalents. to change. c. america: 52-55-1106-0803 uk: 44-8706-080-208 rf coax connectors tnc connectors the tyco electronics tnc rf connector family, with 7/16-28 threaded cou- plings, provides low noise levels and optimum stability, and can withstand the shock and vibration often present in hostile environ- ments. a vailable in both 50 and 75 ohm versions, these connectors feature numer- ous styles including cable plugs and jacks, adapters and printed circuit board connectors. these connec- tors accept a wide range of coaxial cables and are intermateable with industry standard connectors designed to mil-c-39012 specifications. single crimp connectors provide reduced applica- tion time and lower applied costs. this is accomplished by using tyco electronics one-crimp operation tooling which simultaneously termi- nates the inner conductor, outer braid and cable support with one controlled stroke. t yco electronics can also supply low-cost alternatives with a commercial type product line. these connec- tors are designed around the mil-specifications, offer- ing comparable mechanical and electrical performance. product facts hex crimp and o crimp connectors 50 and 75 ohm commercial versions available provides excellent perfor- mance at frequencies up to 7 ghz low cost commercial type available commercial type is smaller and lighter weight ta rnish resistant nickel finish choice of dielectric materials standard and weatherproof versions available plugs available for high temperature cable single crimp connectors fast application?ne crimping operation terminates inner conductor, outer braid and cable support low application cost connectors for semi-rigid cable crimp and solder versions available standard cable stripping dimensions universal cable termination common to all configurations listed under the component program of underwriters laboratories inc., file no. e81956 pc board connectors are recognized under the component program of underwriters laboratories inc., file no. e81956 certified by canadian standards association file no. lr 7189 r r r related product data military category ?all crimp connectors are category b type (tyco electronics crimp tooling), unless otherwise noted. packaging ?all mil-type connectors are packaged individually and all commercial connectors are bulk pack- aged unless otherwise noted. between series adapters for tnc between series adapters, see pages 251-260.
30 catalog 1307191 dimensions are in millimeters dimensions are shown for usa: 1-800-522-6752 south america: 55-11-2103-6000 revised 3-07 and inches unless otherwise reference purposes only. canada: 1-905-470-4425 hong kong: 852-2735-1628 specified. values in brackets specifications subject mexico: 01-800-733-8926 japan: 81-44-844-8013 www.tycoelectronics.com are standard equivalents. to change. c. america: 52-55-1106-0803 uk: 44-8706-080-208 rf coax connectors tnc connectors (continued) single category b commercial commercial characteristics crimp o crimp o crimp commercial solder semi-rigid solder (mil type) (mil type) & hex crimp pcb jacks clamp 50 & 75 ohm electrical impedance, nom. 50 50 50 50 50 50 50 (ohms) w orking voltage 500 500 500 500 500 335 500 (volts rms) contact resistance inner: 1.5 inner: 1.5 inner: 2.0 inner: 6.0 inner: 2.75 inner: 1.5 inner: 1.5 (milliohms) outer: 3 outer: 0.2 outer: 0.3 outer: 3.0 outer: 1.0 outer: 0.2 outer: 0.2 initial insulation resistance 5000 5000 5000 5000 5000 5000 5000 (megohms) dielectric withstanding 1500 1500 1500 1500 1500 1500 1500 v oltage (vac) corona level at 70,000 ft. 5 max. 5 max. 5 max. 5 max. 5 max. (picocoulombs) @ 375 vrms @ 375 vrms @ 375 vrms @ 375 vrms @ 375 vrms rf leakage, max. 60 @ 55 @ 60 @ 55 @ (db) 2-3 ghz 2-3 ghz 2-3 ghz 2-3 ghz rf insertion loss, 0.18 @ 0.2 @ 0.06 @ 0.2 @ max. (db) 9 ghz 3 ghz 3-6 ghz 3 ghz frequency range 0-4 0-11 0-7 0-4 0-4 0-15 0-11 (ghz) vswr in frequency 1.35 1.3 1.40 1.35 1.30 @ range max. 4 ghz mechanical force to engage/ 10/2 2/2 6/6 2 2 couple, lbs. [n] [44.5/8.9] [8.9/8.9] [26.7/26.7] [.023] [.023] coupling nut retention, 100 100 60 100 100 min. lbs. [n] [444.8] [444.8] [266.9] [444.8] [444.8] cable retention, 60 [266.9] 60 [266.9] 60 [266.9] 60 [266.9] 60 40 lbs. [n] rg 58c/u rg 58c/u rg 58c/u (pcb ret) [266.9] [178.0] durability (cycles) 500 500 500 500 500 500 500 jam nut mounting torque, 25 25 25 25 25 25 25 max. lbs. [n?] [2.8] [2.8] [2.8] [2.8] [2.8] [2.8] [2.8] environmental t emperature range, -65 to +85 -65 to +165 1 -55 to +85 -55 to +85 -65 to +165 -65 to +105 -65 to +165 operating (c? -55 to +85 2 mil-std-202 mil-std-202 mil-std-202 mil-std-202 mil-std-202 mil-std-202 mil-std-202 vibration method 204 method 204 method 204 method 201a method 204 method 202 method 202 cond. b cond. b cond. b cond. a cond. b cond. b cond. b mil-std-202 mil-std-202 mil-std-202 mil-std-202 mil-std-202 mil-std-202 mil-std-202 physical shock method 213 method 213 method 213 method 213 method 213 method 213 method 213 cond. g, (50 gs) cond. i, (100 gs) cond. i, (100 gs) cond. i, (100 gs) cond. i, (100 gs) cond. i cond. i mil-std-202 mil-std-202 mil-std-20 mil-std-202 mil-std-202 mil-std-202 mil-std-202 thermal shock method 107 method 107 method 107 cond. b cond. a method 107 method 107 method 107 method 107 moisture mil-std-202 mil-std-202 mil-std-202 mil-std-202 mil-std-202 mil-std-202 mil-std-202 method 106 resistance method 106 method 106 t ype ii method 106 method 106 method 106 method 106 mil-std-202 mil-std-202 mil-std-202 mil-std-202 mil-std-202 mil-std-202 mil-std-202 salt spray method 101 method 101 method 101 method 101 method 101 method 101 method 101 cond. b cond. b cond. b cond. b cond. b cond. b cond. b product 108-12001 108-12046 108-12032 specification 1 assembled to cable with polytetrafluorethylene dielectric. 2 assembled to cable with polyethylene dielectric. specifications
31 catalog 1307191 dimensions are in millimeters dimensions are shown for usa: 1-800-522-6752 south america: 55-11-2103-6000 revised 3-07 and inches unless otherwise reference purposes only. canada: 1-905-470-4425 hong kong: 852-2735-1628 specified. values in brackets specifications subject mexico: 01-800-733-8926 japan: 81-44-844-8013 www.tycoelectronics.com are standard equivalents. to change. c. america: 52-55-1106-0803 uk: 44-8706-080-208 rf coax connectors tnc connectors (continued) single category b commercial commercial characteristics crimp o crimp o crimp commercial solder semi-rigid solder (mil type) (mil type) & hex crimp pcb jacks clamp 50 & 75 ohm connector material collar brass brass brass brass brass qq-b-626 qq-b-626 qq-b-626 qq-b-626 qq-b-626 phos. bronze phos. bronze outer contact qq-b-750 qq-b-750 brass brass brass (plug) beryl. copper beryl. copper mil-c-21768 qq-b-626 qq-b-626 qq-c-530 qq-c-530 outer contact brass brass zinc zinc zinc brass brass (jack) qq-b-626 qq-b-626 qq-z-363 qq-z-363 qq-z-363 qq-b-626 qq-b-626 polyethylene teflon dielectric teflon teflon polypropylene polypropylene mil-p-19468 teflon teflon mil-p-19468 mil-p-19468 gen. purpose gen. purpose 1 polyester pbt mil-p-19468 mil-p-19468 mil-p-24519 center contact brass brass brass brass brass (plug) qq-b-626 qq-b-626 qq-b-626 qq-b-626 qq-b-626 center contact beryl. copper beryl. copper beryl. copper phos. bronze phos. bronze beryl copper beryl copper (jack) astm-b-643, astm-b-643, qq-c-530 qq-c-530 qq-c-530 qq-b-570 qq-b-570 qq-c-530 qq-c-530 gasket silicon rubber silicon rubber silicon rubber silicone rubber silicone rubber qq-r-765 qq-r-765 qq-r-765 qq-r-765 qq-r-765 ferrule copper copper copper qq-c-576 qq-c-576 qq-c-576 connector primary finishes 2 collar silver silver bright nickel nickel nickel qq-s-365 qq-s-365 qq-n-290 qq-n-290 qq-n-290 outer contact silver bright nickel bright or bright nickel bright nickel nickel nickel (plug & jack) qq-s-365 qq-n-290 matte nickel qq-n-290 qq-n-290 qq-n-290 qq-n-290 qq-n-290 t in lead, tin lead, tin lead, center contact gold silver astm-b-545 astm-b-545 astm-b-545 gold gold (plug & jack) mil-g-45204 qq-s-365 silver, qq-s-365 silver, qq-s-365 silver, qq-s-365 mil-g-45204 mil-g-45204 gold, mil-g-45204 gold, mil-g-45204 gold, mil-g-45204 ferrule silver gold tin lead qq-s-365 mil-g-45204 astm-b-5 1 several pc board connectors have an outer polyester pbt insulator per mil-p-24519. 2 if several finishes are listed, refer to individual catalog page(s) or customer drawings for exact specifications. specifications (continued) teflon is a trademark of e.i. dupont de nemours and company.
32 catalog 1307191 dimensions are in millimeters dimensions are shown for usa: 1-800-522-6752 south america: 55-11-2103-6000 revised 3-07 and inches unless otherwise reference purposes only. canada: 1-905-470-4425 hong kong: 852-2735-1628 specified. values in brackets specifications subject mexico: 01-800-733-8926 japan: 81-44-844-8013 www.tycoelectronics.com are standard equivalents. to change. c. america: 52-55-1106-0803 uk: 44-8706-080-208 rf coax connectors tnc connectors, 50 ohm interchangeable certi-crimp dies for rg/u termination center body dim. hand tool pro-crimper contact dielectric style hand tool part no. cable type plating plating l with 354940-1 or comments integral die pro-crimper adapter 679304-1 174, 188, hex crimp gold nickel polypropylene commercial 31.24 58436-3 5222506-5 188a, 316 1.230 179, 179a, 179b 31.24 161, 187, 187a hex crimp gold nickel polypropylene commercial 58436-3 5222506-6 belden 9221 1.230 hex crimp gold nickel polypropylene commercial 31.25 58436-1 1 5222506-1 58, 58a, 58b, 58c 1.230 o crimp gold nickel teflon mil type w eatherproof 34.93 220045-2 5225555-2 1.375 142, 142a o crimp gold nickel teflon mil type weatherproof 34.93 220045-2 5225555-6 142b, 400 1.375 8, 8a, 213 o crimp gold nickel teflon mil type weatherproof 50.8 220015-1 5225555-7 2.000 o crimp gold nickel teflon mil type weatherproof 50.8 220015-1 5225555-8 9, 9a, 9b, 214 2.000 1 order tyco electronics pro-crimper coaxial hex crimp hand tool assembly 58433-2, which includes dies 58436-1. plugs, crimp 13.21 dia. [.520] max. l max. mil type o crimp w eatherproof hex crimp and o crimp 16.26 dia. [.640] max. l max. note: pa rt numbers are rohs compliant except: indicates non-rohs compliant. belden is a trademark of belden wire and cable company. teflon is a trademark of e.i. dupont de nemours and company.
33 catalog 1307191 dimensions are in millimeters dimensions are shown for usa: 1-800-522-6752 south america: 55-11-2103-6000 revised 3-07 and inches unless otherwise reference purposes only. canada: 1-905-470-4425 hong kong: 852-2735-1628 specified. values in brackets specifications subject mexico: 01-800-733-8926 japan: 81-44-844-8013 www.tycoelectronics.com are standard equivalents. to change. c. america: 52-55-1106-0803 uk: 44-8706-080-208 rf coax connectors tnc connectors, 50 ohm (continued) 16.26 dia. [.640] max. 23.4 [.921] max. plugs for semi rigid-cable 19.6 [.770] 16.5 [.650] dia. max. a dia. b dia. ref. interchangeable dies for interchangeable rg/u termination center body dim. dim. pro-crimper dies for hand contact dielectric style hand tool tool 69710-1 part no. cable type plating plating a b 354940-1 or & 626 pneu. comments pro-crimper head 318161-1 adapter 679304-1 405 solid 2.3 3.0 semi-rigid/ solder gold passivate ptfe mil type .089 .120 3 1057635-1 2.18 [.086] 402 w eather semi-rigid/ crimp gold nickel teflon commercial proof 12 228179-3 3.66 [.141] rg 402/u solid 3.7 4.6 .141 solder gold gold ptfe mil type .144 .180 3 1057631-1 3.66 [.141] 1 hand tool 59980-1, requires (2) crimping dies 312253-1 and (1) locator 312644-1. 2 pneumatic tool 58318-1, requires (2) crimping dies 313720-1 and (1) locator 312645-1. 3 refer to recommended assembly tools in tool section. crimp type solder type note: pa rt numbers are rohs compliant except: indicates non-rohs compliant. teflon is a trademark of e.i. dupont de nemours and company.
34 catalog 1307191 dimensions are in millimeters dimensions are shown for usa: 1-800-522-6752 south america: 55-11-2103-6000 revised 3-07 and inches unless otherwise reference purposes only. canada: 1-905-470-4425 hong kong: 852-2735-1628 specified. values in brackets specifications subject mexico: 01-800-733-8926 japan: 81-44-844-8013 www.tycoelectronics.com are standard equivalents. to change. c. america: 52-55-1106-0803 uk: 44-8706-080-208 rf coax connectors tnc connectors, 50 ohm (continued) right-angle plugs, crimp interchangeable dies for rg/u termination center body dim. certi-crimp pro-crimper contact dielectric style hand tool hand tool part no. cable type plating plating l with 354940-1 or comments integral die pro-crimper adapter 679304-1 174, 174a, 188 o crimp gold nickel polymethyl- commercial 38.23 318450-2 5414173-3 188a, 316 pentene 1.505 58, 58a, 58b o crimp gold nickel teflon mil type weatherproof 47.63 220045-2 5225559-2 58c 1.875 55, 55a, 55b o crimp gold nickel polymethyl- commercial 38.23 220189-1 5414173-6 223 pentene 1.505 142, 142a, 142b o crimp gold silver teflon mil type weatherproof 47.63 220045-2 5225554-6 400 1.875 8, 8a, 213 o crimp gold nickel teflon mil type weatherproof 63.5 220015-1 5225559-8 2.500 393, 225 o crimp gold silver teflon mil type weatherproof 63.5 220015-1 1-5225554-1 2.500 9, 9a, 9b, 214 o crimp gold silver teflon mil type 59.52 220015-1 5225349-9 2.343 o crimp mil type o crimp w eatherproof 16.26 dia. [.640] max. 31.75 [1.250] l max. 13.21 dia. [.520] l max. 27.43 [1.080] max. note: pa rt numbers are rohs compliant except: indicates non-rohs compliant. teflon is a trademark of e.i. dupont de nemours and company.
35 catalog 1307191 dimensions are in millimeters dimensions are shown for usa: 1-800-522-6752 south america: 55-11-2103-6000 revised 3-07 and inches unless otherwise reference purposes only. canada: 1-905-470-4425 hong kong: 852-2735-1628 specified. values in brackets specifications subject mexico: 01-800-733-8926 japan: 81-44-844-8013 www.tycoelectronics.com are standard equivalents. to change. c. america: 52-55-1106-0803 uk: 44-8706-080-208 rf coax connectors tnc connectors, 50 ohm (continued) jacks, crimp interchangeable dies for rg/u termination center body dim. certi-crimp pro-crimper contact dielectric style hand tool hand tool part no. cable type plating plating l with 354940-1 or comments integral die pro-crimper adapter 679304-1 174, 174a, 188 o crimp gold nickel polymethyl- commercial 30.48 318450-2 5414171-3 188a, 316 pentene 1.200 58, 58a, 58b o crimp gold silver teflon mil type 35.72 220045-2* 225551-2 58c w eatherproof 1.406 141, 141a, 303 o crimp gold silver teflon mil type 35.72 220045-2* 225551-5 w eatherproof 1.406 55, 55a, 55b o crimp gold nickel polymethyl- commercial 29.85 220189-1 414171-6 223 pentene 1.175 142, 142a, 142b o crimp gold silver teflon mil type weatherproof 35.72 220045-2* 225551-6 400 1.406 *battery, pneumatic mil type o crimp w eatherproof o crimp l max. 11.43 dia. [.450] max. 11.43 dia. [.450] max. l max. jacks, solder/clamp 33.3 [1.31] 14.3 [.562] dia. 12.7 [.500] a/f 11.1 [.437] a/f rg/u termination center body cable type contact plating dielectric style part no. plating rg 58c/u, solder/clamp gold silver teflon mil type 1312569-1 rg 141 a/u note: pa rt numbers are rohs compliant except: indicates non-rohs compliant. teflon is a trademark of e.i. dupont de nemours and company.
36 catalog 1307191 dimensions are in millimeters dimensions are shown for usa: 1-800-522-6752 south america: 55-11-2103-6000 revised 3-07 and inches unless otherwise reference purposes only. canada: 1-905-470-4425 hong kong: 852-2735-1628 specified. values in brackets specifications subject mexico: 01-800-733-8926 japan: 81-44-844-8013 www.tycoelectronics.com are standard equivalents. to change. c. america: 52-55-1106-0803 uk: 44-8706-080-208 rf coax connectors tnc connectors, 50 ohm (continued) bulkhead jacks, crimp interchangeable dies for rg/u termination center body dim. certi-crimp pro-crimper contact dielectric style hand tool hand tool part no. cable type plating plating l with 354940-1 or comments integral die pro-crimper adapter 679304-1 174, 174a, 316 o crimp gold nickel polymethyl- commercial 34.93 318450-2 5414168-3 188, 188a pentene 1.375 179, 179a, 179b 38.1 161, 187, 187a single gold nickel teflon mil type 1.500 91910-1 5331238 - belden 9221 crimp rd 188, 316 o crimp gold nickel polymethyl- commercial 34.93 58539-1 5414168-4 double braid pentene 1.375 58, 58a, 58b, 58c o crimp gold nickel polymethyl- commercial 34.93 220189-1 5414168-1 141, 141a, 303 pentene 1.375 223 polymethyl- 34.93 55, 55a, 55b o crimp gold nickel pentene commercial 1.375 220189-1 5414168-6 o crimp gold nickel polymethyl- commercial 34.93 220189-1 5414168-5 142, 142a pentene 1.375 142b, 400 o crimp gold nickel teflon mil type weatherproof 38.1 220045-2 5225557-6 1.500 single crimp o crimp maximum panel thickness single crimp 3.18 [.125] ; dual crimp 6.35 [.250] recommended p anel cutout h = 11/16 [.6875] max. across flats, 20.32 [.800] max. across points. h l max. h l max. 5.54 [.218 ] +.008 -.000 +0.03 -0.00 12.83 dia. [.505 ] +.013 -.000 +0.05 -0.00 note: pa rt numbers are rohs compliant except: indicates non-rohs compliant. belden is a trademark of belden wire and cable company. teflon is a trademark of e.i. dupont de nemours and company.
37 catalog 1307191 dimensions are in millimeters dimensions are shown for usa: 1-800-522-6752 south america: 55-11-2103-6000 revised 3-07 and inches unless otherwise reference purposes only. canada: 1-905-470-4425 hong kong: 852-2735-1628 specified. values in brackets specifications subject mexico: 01-800-733-8926 japan: 81-44-844-8013 www.tycoelectronics.com are standard equivalents. to change. c. america: 52-55-1106-0803 uk: 44-8706-080-208 rf coax connectors tnc connectors, 50 ohm (continued) maximum panel thickness 6.35 [.250] recommended p anel cutout 5.54 [.218 ] +.008 -.000 +0.03 -0.00 12.83 dia. [0.505 ] +.013 -.000 +0.05 -0.00 h = 17.45 [.687] max. across flats, 20.32 [.800] max. across points. h l max. 30.5 [1.200] 12.1 [.475] min. 12.7 [.500] a dia. b dia. recommended panel cutout dia. min. 6.40 [.250] max. panel ref. 15.9 [.625] hex. 19.1 [.750] hex. 20.9 [.821] rg/u termination center body dim. cable type contact plating dielectric style l part no. plating 402 crimp gold nickel teflon mil type 25.4 228502-1 semi-rigid/ 1.000 3.66 [.141]* *toolinghand tool 59980-1, requires (2) crimping dies 312253-1 and (1) locator 220220-2. rg/u termination center body dim. dim. cable type contact plating dielectric style ab part no. plating rg 402/u solder gold p ass. stainless solid ptfe mil type 3.7 4.6 1057676-1 3.66 [.141] steel .144 .180 rg 405/u solder gold p ass. stainless solid ptfe mil type 2.3 3.0 1057679-1 2.16 [.085] steel .089 .120 bulkhead jacks for semi-rigid cable, rear mount note: pa rt numbers are rohs compliant except: indicates non-rohs compliant. teflon is a trademark of e.i. dupont de nemours and company.
38 catalog 1307191 dimensions are in millimeters dimensions are shown for usa: 1-800-522-6752 south america: 55-11-2103-6000 revised 3-07 and inches unless otherwise reference purposes only. canada: 1-905-470-4425 hong kong: 852-2735-1628 specified. values in brackets specifications subject mexico: 01-800-733-8926 japan: 81-44-844-8013 www.tycoelectronics.com are standard equivalents. to change. c. america: 52-55-1106-0803 uk: 44-8706-080-208 rf coax connectors tnc connectors, 50 ohm (continued) panel jacks, crimp recommended p anel cutout 12.7 0.1 [.500 .004 ] 12.7 0.1 [.500 .004 ] 11.2 dia. [.441] min. 2.71 dia. [.107] min. clearance for 3-56 screws (4 holes) 17.86 sq. [.703] max. l max. 22.9 [.900] 16.3 [.642] 14.3 [.562] a dia. b dia. 17.5 [.687] sq. 12.7 [.500] typ. 3.20 [.125] dia. 4 plcs. center certi-crimp rg/u termination contact body dielectric style dim. hand tool part no. cable type plating plating l with integral die 58, 58a, crimp gold silver teflon mil type 34.93 220045-2 225348-2 58b, 58c 1.375 rg/u termination center body dim. dim. cable type contact plating dielectric style ab part no. plating rg 402/u solder gold gold teflon mil type 3.7 4.6 1057697-1 3.66 [.141] .144 min. .180 rg 405/u solder gold gold teflon mil type 2.3 3.0 1057699-1 2.16 [.085] .089 min. .120 panel jacks for semi-rigid cable note: pa rt numbers are rohs compliant except: indicates non-rohs compliant. teflon is a trademark of e.i. dupont de nemours and company.
39 catalog 1307191 dimensions are in millimeters dimensions are shown for usa: 1-800-522-6752 south america: 55-11-2103-6000 revised 3-07 and inches unless otherwise reference purposes only. canada: 1-905-470-4425 hong kong: 852-2735-1628 specified. values in brackets specifications subject mexico: 01-800-733-8926 japan: 81-44-844-8013 www.tycoelectronics.com are standard equivalents. to change. c. america: 52-55-1106-0803 uk: 44-8706-080-208 rf coax connectors tnc connectors, 50 ohm (continued) (top view) b 34.93 [1.375] mtg. hgt. 1/2-28 thread 15.88 [.625] c l a b 34.93 [1.375] 1/2-28 thread 15.88 [.625] mtg. hgt. ve rtical pc board/ panel mount jacks v alox body right-angle pc board/ panel mount jacks *2-56 self-tapping screws: for 1.57 [3/32] or greater panel thickness part no. 221108-2 for less than 1.57 [3/32] panel thickness part no. 221108-4 v alox body c l a b 34.93 [1.375] 15.88 [.625] mtg. hgt. metal body 5.54 [.218 ] +.008 -.000 +0.03 -0.00 12.83 [.505 ] dia. +0.13 -.000 +0.05 -0.00 maximum panel thickness 6.1 [.240] recommended p anel cutout lockwasher and jam nut part no. 1-329632-2 part no. 1-329631-2 mating face (top view) 5.08 0.05 [.200 .002 ] 2.54 0.05 [.100 .002 ] 10.16 0.08 [.400 .003 ] 5.08 0.05 [.200 .002 ] g s 0.89 0.08 [.035 .003 ] (2 holes) dia. 2.01 0.08 [.079 .003 ] (2 holes) dia. g recommended pc board layout center dimensions body contact part numbers material plating ab v alox, white 50 gold 8.56 21.21 5227818-1 .337 .835 metal 50 gold 8.26 20.83 5227839-1 .325 .820 body center contact dimension part number material plating b v alox, white gold 21.21 5227820-1 .835 recommended pc board layout 5.08 0.05 [.200 .002 ] 5.08 0.05 [.200 .002 ] 10.16 0.08 [.400 .003 ] gs 2.54 0.05 [.100 .002 ] 0.89 0.08 dia. [.035 .003 ] (2 holes) 10.16 0.08 [.400 .003 ] 2.01 0.08 dia. [.079 .003 ] (2 holes) 1/2-28 thread note: pa rt numbers are rohs compliant except: indicates non-rohs compliant. v alox is a trademark of general electric company.
40 catalog 1307191 dimensions are in millimeters dimensions are shown for usa: 1-800-522-6752 south america: 55-11-2103-6000 revised 3-07 and inches unless otherwise reference purposes only. canada: 1-905-470-4425 hong kong: 852-2735-1628 specified. values in brackets specifications subject mexico: 01-800-733-8926 japan: 81-44-844-8013 www.tycoelectronics.com are standard equivalents. to change. c. america: 52-55-1106-0803 uk: 44-8706-080-208 rf coax connectors tnc connectors, 50 ohm (continued) right-angle pc board/ mount jacks plating body nickel center contact gold dielectric teflon bulkhead solder jacks 9.65 dia. [.380 ] +0.13 -.000 +.005 -.000 3.96 dia. [.156 ] +0.08 -.000 +.003 -.000 panel thickness refer to chart below. recommended p anel cutout (jack) pa rt no. 5413933-1 10.93 [.430] max. 0.89 [.035] 0.89 [.035] max. 11.43 [.450] 4.04 max. [.159] 9.53 [.375] 14.86 [.585] 10.97 0.08 [.432 .003 ] 11.56 0.08 dia. [.455 .003 ] insulation bushing material nylon part no. 227223-1 recommended panel cutout (bushing) l max. 13.09 dia. [.515] max. accepts 1.5 dia. max. wire [.059] 2.74 [.108] 2 holes dia. 6.60 [.260] 5.59 [.220] 3.43 [.135] 2 holes dia. 3.30 [.130] 8.26 [.325] 16.51 [.650] 3.30 [.130] 1.27 [.050] dia. 2.79 [.110] 2.29 [.090] 2 holes dia. 6.60 [.260] 23.62 [.930] 28.98 [1.141] recommended pc board cutout center body contact dielectric dim. panel pa rt number plating plating l thickness nickel gold 33.33 1.17-6.35 5227764-2 v alox 1.312 .046-.250 note: pa rt numbers are rohs compliant except: indicates non-rohs compliant. teflon is a trademark of e.i. dupont de nemours and company. v alox is a trademark of general electric company.
41 catalog 1307191 dimensions are in millimeters dimensions are shown for usa: 1-800-522-6752 south america: 55-11-2103-6000 revised 3-07 and inches unless otherwise reference purposes only. canada: 1-905-470-4425 hong kong: 852-2735-1628 specified. values in brackets specifications subject mexico: 01-800-733-8926 japan: 81-44-844-8013 www.tycoelectronics.com are standard equivalents. to change. c. america: 52-55-1106-0803 uk: 44-8706-080-208 rf coax connectors tnc connectors, 50 ohm (continued) 12.96 dia. [.510] max. 36.2 max. [1.425] 40.14 max. [1.580] 5.54 [.218 ] +0.08 -.000 +.003 -0.00 12.83 [.505 ] dia. +0.13 -.000 +.005 -0.00 maximum panel thickness 6.35 [.250] recommended p anel cutout 25.9 [1.000] 10.1 [.750] 2.0 [.080] 19.1 [.750] sq. 1.6 [.062] dia. ref. 2.2 [.086] dia. 13.5 [.531] typ. 3.2 [.125] dia. 4 plcs. panel mount jack receptacles 37.0 [1.455] 15.0 [.590] 10.1 [.750] 2.0 [.080] 19.1 [.750] sq. 7.0 [.275] dia. 2.2 [.086] dia. 13.5 [.531] typ. 3.2 [.125] dia. 4 plcs. flange mount receptacles shell part no. nickel plated 1057775-1 1 brass 1 captured center contact shell part no. nickel plated 1057780-1 1 brass 1 captured center contact center body contact plating dielectric part no. plating gold nickel polypropylene 5221325-1 center body contact plating dielectric part no. plating gold nickel acetal 221500-1 jack-jack adapter bulkhead jack-jack adapter note: pa rt numbers are rohs compliant except: indicates non-rohs compliant.
42 catalog 1307191 dimensions are in millimeters dimensions are shown for usa: 1-800-522-6752 south america: 55-11-2103-6000 revised 3-07 and inches unless otherwise reference purposes only. canada: 1-905-470-4425 hong kong: 852-2735-1628 specified. values in brackets specifications subject mexico: 01-800-733-8926 japan: 81-44-844-8013 www.tycoelectronics.com are standard equivalents. to change. c. america: 52-55-1106-0803 uk: 44-8706-080-208 rf coax connectors tnc connectors, 75 ohm plugs, crimp these connectors have been designed for optimum performance and have a true 75 ohm impedance the complete length of the con- nector. the crimp die tool- ing listed below is different from the equivalent 50 ohm connectors. bulkhead jack, crimp interchangeable dies for rg/u termination center body dim. pro-crimper contact dielectric style hand tool part no. cable type plating plating l 354940-1 or pro-crimper adapter 679304-1 179, 179a, 179b, 187, o crimp gold nickel polymethyl- commercial 27.79 318451-2 5221506-3 187a, belden 9221 pentene 1.094 a t&t o crimp gold nickel polymethyl- commercial 29.46 58174-1 5221506-5 735a pentene 1.160 302 belden 88241 89269 hi-temp 62a hex crimp gold nickel polymethyl- commercial 31.75 58425-1 5413591-1 t imes pl62, pentene 1.250 berk-tek btdc-59, btdc-62 belden 8281 o crimp gold nickel polymethyl- commercial 32.9 58538-1 5221506-2 9141, 9231 pentene 1.295 h 34.29 [1.350] max. hex crimp and o crimp 12.96 dia. [.510] max. l max. 5.54 [.218 ] +0.08 -.000 +.003 -.000 12.83 [.505 ] dia. +0.13 -.000 +.005 -.000 maximum panel thickness 6.35 [.250] recommended p anel cutout rg/u termination center contact body dielectric style dim. t ooling part no. cable type plating plating h 210, 62, 11/16 across flats, use hand tool 62a, 62b, 20.32 354940-1 59, 59a, 59b, o crimp gold nickel polymethyl- commercial .800 with die set 221509-1 belden 9291, 9209, pentene max. across 58536-1 9169, 89269 points note: pa rt numbers are rohs compliant except: indicates non-rohs compliant. a t&t is a trademark of at&t corporation. belden is a trademark of belden wire and cable company. berk-tek is a trademark of nexans, inc.
43 catalog 1307191 dimensions are in millimeters dimensions are shown for usa: 1-800-522-6752 south america: 55-11-2103-6000 revised 3-07 and inches unless otherwise reference purposes only. canada: 1-905-470-4425 hong kong: 852-2735-1628 specified. values in brackets specifications subject mexico: 01-800-733-8926 japan: 81-44-844-8013 www.tycoelectronics.com are standard equivalents. to change. c. america: 52-55-1106-0803 uk: 44-8706-080-208 rf coax connectors tnc connectors, 75 ohm (continued) bulkhead jack-jack adapter 40.14 max. [1.580] center body contact plating dielectric part no. plating gold nickel polymethylpentene 414396-1 right-angle pc board/ panel mount jacks c l a b 34.93 [1.375] 15.88 [.625] mtg. hgt. metal body center dimensions pa rt numbers body contact ab without with material plating mounting posts mounting posts metal 75 gold 8.26 20.83 5413506-1 .325 .820 1/2-28 thread 5.54 [.218 ] +.008 -.000 +0.03 -0.00 12.83 [.505 ] dia. +0.13 -.000 +0.05 -0.00 maximum panel thickness 6.1 [.240] recommended p anel cutout note: pa rt numbers are rohs compliant except: indicates non-rohs compliant.
44 catalog 1307191 dimensions are in millimeters dimensions are shown for usa: 1-800-522-6752 south america: 55-11-2103-6000 revised 3-07 and inches unless otherwise reference purposes only. canada: 1-905-470-4425 hong kong: 852-2735-1628 specified. values in brackets specifications subject mexico: 01-800-733-8926 japan: 81-44-844-8013 www.tycoelectronics.com are standard equivalents. to change. c. america: 52-55-1106-0803 uk: 44-8706-080-208 rf coax connectors bnc connectors (50 ohm/75 ohm) product facts bayonet lock coupling for quick connect/disconnect v arious connectors available in 50 and 75 ohm versions fully intermateable with comparable bnc ug/u connectors full range of hex crimp and o crimp products for common coaxial cables. low vswr single crimp connectors offer one crimping operation for fast application t wist-on connectors require no special tooling for application to the cable field serviceable (category a) connectors qualified to mil-c-39012 field replaceable (category c) plugs with captivated center contact field replaceable plugs can be terminated with industry standard tooling ta rnish resistant nickel finish available choice of different dielectrics listed under the component program of underwriters laboratories inc., file no. e81956 pc board soldered connectors are recognized under the component program of underwriters laboratories inc., file no. e81956 certified by canadian standards association file no. lr 7189 between series adapters for bnc between series adapters, see pages 251-260. r r r the tyco electronics bnc rf connector family with bayonet locking coupling provides highly reliable, quick connect/disconnect coaxial connections. exclusive single and o crimp terminations allow positive insulation grip and require no soldering, providing terminations at a very low overall applied cost. a vailable in both 50 and 75 ohm versions, these con- nectors feature numerous styles including cable plugs and jacks, adapters and printed circuit board con- nectors. in addition to a variety of crimp type termi- nations, connectors are fur- nished in field replaceable and twist-on styles. these connectors accept a wide range of coaxial cables and are intermateable with industry standard connec- tors designed to mil-c- 39012 specifications. t yco electronics can also supply low cost alternatives with an extensive commer- cial type product line. a lower cost consumer series product offers the capability to supply center contacts in strip form and allow for auto- mated center contact crimp technology. all connectors are designed around the mil-specifications, but utilize low-cost materials, offering comparable mechanical and electrical performance. product specifications 108-1275 bnc ohm terminators 108-12020 ?bnc o crimp connectors 108-12044 ?bnc commercial hex crimp 108-12047 ?bnc commercial and hex crimp connectors 108-12074 ?bnc solder jacks 108-12075 ?bnc connectors (category a) 108-12078 ?bnc commercial pcb panel-mount jacks 108-12002 ?bnc commercial t adapter 108-12095 ?bnc commercial 75 ohm connectors 108-12096 ?bnc commercial feed- thru and bulkhead adapters 108-12079 ?bnc commercial 50 ohm solder jacks 108-12103 ?bnc commercial pcb press fit jacks application specifications 114-12001 ?bnc commercial pcb jack press fit performance specifications page 45 material specifications ?page 46 t ooling ?pages 266-268 military category ?all mil type o crimp connectors are category b type (tyco electronics crimp tooling), unless otherwise noted. packaging ?all mil type connectors are packaged individually, all o crimp connectors are bulk packaged and all hex crimp connectors are individually pack- aged unless otherwise noted. related product data
bnc connectors (50 ohm/75 ohm) performance specifications single category b straight right-angle commercial commercial commercial pc commercial characteristics crimp o crimp solder solder o crimp o crimp board solder (mil type) (mil type) clamp clamp & hex crimp & hex crimp 50 & 75 ohms 50 ohm jacks 50 ohms 75 ohms electrical impedance, nom. 50 50 50 50 50 75 50 & 75 50 & 75 (ohms) w orking voltage 500 500 500 500 500 500 500 500 (volts rms) contact resistance inner: 1.5 inner: 1.5 inner: 1.5 inner: 1.5 inner: 2.0 inner: 2.0 inner: 6/1.5 inner: 2.75 (milliohms) outer: 0.3 outer: 0.2 outer: .20 outer: .20 outer: 1.0 outer: 2.0 outer: 3/0.2 outer: 1.0 initial insulation resistance 5000 5000 5000 5000 5000 5000 5000 5000 (megohms) dielectric withstanding 1500 1500 1500 1500 1500 1500 1500 1500 v oltage (vac) corona level at 70,000 ft. 375 375 375 375 375 375 375 (volts, rms) rf leakage, max. -55 at -55 at -55 at -55 at -55 at (db) 2-3 ghz 2-3 ghz 2-3 ghz 2-3 ghz 1-2 ghz rf insertion loss, 0.2 at 0.2 at 0.3 at 0.2 at 0.15 at max. (db) 3 ghz 3 ghz 3 ghz 3 ghz 2 ghz frequency range 0-2.5 0-4 0-4 0-4 0-4 0-2 0-4 and 0-4 (ghz) 0-2 vswr in frequency 1.35 1.30 1.30 1.35 1.30 1.30 range max. mechanical force to engage (lbs. [n])/couple, 13.3/11.12 13.3/11.12 13.3/.028 13.3/.028 26.7/26.69 26.7/26.69 (in-lbs. [n-m]) max. [3/2.5] [3/2.5] [3/2.5] [3/2.5] [6/6.0] [6/6.0] coupling nut retention, 444.8 444.8 444.8 444.8 266.9 266.9 min. n [lbs.] [100] [100] [100] [100] [60] [60] cable retention, 266.9 [60] 266.9 [60] 177.9 [40] 177.9 [40] 266.9 [60] 266.9 [60] 266.9 [60] n [lbs.] (rg58c/u) (rg58c/u) (rg58c/u) (rg58c/u) (rg58c/u) (rg58c/u) (pcb ret) durability (cycles) 500 500 500 500 500 500 500 500 jam nut mounting torque, 25 25 25 25 25 25 3 /12 4 25 max. [n?] (in. lbs.) [2.8] [2.8] [2.8] [2.8] [2.8] [2.8/1.4] [2.8] environmental t emperature range, -65 to +85 -65 to +165 1 -65 to +165 -65 to +165 -55 to +85 -55 to +85 -55 to +85 -65 to +165 operating (c? -55 to +85 2 mil-std-202 mil-std-202 mil-std-202 mil-std-202 mil-std-1344 mil-std-202 mil-std-202 mil-std-202 vibration method 204 method 204 method 204 method 204 method 2005 method 204 method 204 cond. b cond. b cond. b cond. b cond. iii cond. b method 201a cond. b mil-std-202 mil-std-202 mil-std-202 mil-std-202 mil-std-1344 mil-std-202 mil-std-202 mil-std-202 physical shock method 213 method 213 method 213 method 213 method 2004 method 213 method 213 method 213 cond. g, 50 gs cond. g, 50 gs cond. g cond. g cond. g, 100 gs cond. i, 100 gs cond. i or a, 50 gs cond. i, 100 gs mil-std-202 mil-std-202 mil-std-202 mil-std-202 mil-std-1344 mil-std-202 mil-std-202 mil-std-202 thermal shock method 1003 method 107 method 107 method 107 method 107 cond. a method 107 method 107 method 107 moisture mil-std-202 mil-std-202 mil-std-202 mil-std-202 mil-std-1344 mil-std-202 mil-std-202 mil-std-202 method 1002 resistance method 106 method 106 method 106 method 106 t ype ii method 106 method 106 method 106 mil-std-202 mil-std-202 mil-std-202 mil-std-202 mil-std-1344 mil-std-202 mil-std-202 mil-std-202 salt spray method 101 method 101 method 101 method 101 method 1001 method 101 method 101 method 101 cond. b cond. b cond. b cond. b cond. b cond. b cond. b cond. b product 108-12002 108-12020 108-12044 108-12095 108-12078 108-12079 specification 108-12047 1 assembled to cable with polytetrafluorethylene dielectric. 2 assembled to cable with polyethylene dielectric. 3 f or metal threads 4 f or polyester threads 45 catalog 1307191 dimensions are in millimeters dimensions are shown for usa: 1-800-522-6752 south america: 55-11-2103-6000 revised 3-07 and inches unless otherwise reference purposes only. canada: 1-905-470-4425 hong kong: 852-2735-1628 specified. values in brackets specifications subject mexico: 01-800-733-8926 japan: 81-44-844-8013 www.tycoelectronics.com are standard equivalents. to change. c. america: 52-55-1106-0803 uk: 44-8706-080-208 rf coax connectors
46 catalog 1307191 dimensions are in millimeters dimensions are shown for usa: 1-800-522-6752 south america: 55-11-2103-6000 revised 3-07 and inches unless otherwise reference purposes only. canada: 1-905-470-4425 hong kong: 852-2735-1628 specified. values in brackets specifications subject mexico: 01-800-733-8926 japan: 81-44-844-8013 www.tycoelectronics.com are standard equivalents. to change. c. america: 52-55-1106-0803 uk: 44-8706-080-208 rf coax connectors bnc connectors (50 ohm/75 ohm) performance specifications (continued) single category straight right-angle commercial commercial commercial commercial connector crimp b & c solder solder o crimp pcb pcb solder component (mil type) o crimp clamp clamp hex crimp & solder press fit ohm jacks adapters (mil type) terminators connector material collar brass brass brass brass brass qq-b-626 brass qq-b-626 qq-b-626 zinc qq-z-363 qq-b-626 brass brass outer contact qq-b-626 phos. bronze brass brass brass qq-b-626 (plug) beryl. copper qq-b-750 mil-c-21768 beryl. copper qq-c-530 qq-c-530 zinc shell brass brass brass zinc zinc zinc qq-z-363 brass (jack) qq-b-626 qq-b-626 qq-z-363 qq-z-363 qq-z-363 brass qq-b-626 qq-b-626 teflon polyethylene teflon teflon dielectric mil-p-19468 teflon teflon teflon polypropylene polymethylpentene teflon mil-p-19468 mil-p-19468 polypropylene mil-p-19468 polymethylpentene gen. purpose 1 mil-p-19468 polyester pbt polypropylene, gen. purpose gen. purpose mil-p-24519 gen. purpose brass center contact brass brass brass brass brass qq-b-626 (plug) qq-b-626 qq-b-626 qq-b-626 beryl. copper qq-c-530 beryl. copper beryl. copper phos. bronze phos. bronze center contact astm-b-643 astm-b-643 beryl. copper beryl. copper beryl. copper phos. bronze beryl. copper qq-b-570 qq-b-570 (jack) qq-c-530 qq-c-530 qq-c-530 qq-b-750 qq-c-530 beryl. copper beryl. copper qq-c-530 qq-c-530 gasket silicon rubber silicon rubber silicon rubber silicon rubber silicon rubber silicon rubber qq-r-765 qq-r-765 qq-r-765 qq-r-765 ferrule copper copper copper qq-c-576 qq-c-576 qq-c-576 connector primary finishes 2 silver silver silver collar qq-s-365 qq-s-365 silver/ silver/ bright nickel qq-s-365 bright nickel bright nickel bright nickel bright nickel qq-n-290 bright nickel qq-n-290 qq-n-290 qq-n-290 silver bright or silver outer contacts qq-s-365 qq-s-365 silver/ silver/ matte nickel bright nickel bright nickel bright nickel qq-s-365 (plug & jack) gold bright nickel bright nickel bright nickel qq-n-290 qq-n-290 qq-n-290 qq-n-290 bright nickel qq-n-290 qq-n-290 t in lead tin lead tin lead silver center contacts mil-g-45204 gold gold gold astm-b-545 astm-b-545 gold astm-b-545 qq-s-365 (plug & jack) silver mil-g-45204 silver, qq-s-365 silver, qq-s-365 mil-b-45204 silver, qq-s-365 gold gold, mil-g-45204 gold, mil-g-45204 gold, mil-g-45204 mil-g-45204 silver ferrule 3 qq-s-365 qq-s-365 t in lead t in lead astm-b-545 astm-b-545 1 several pc board connectors have an outer polyester pbt insulator per mil-p-24519. 2 if more than one finish is listed, refer to individual catalog page(s) or customer drawings for exact specification. 3 f errules with tin-lead finish are used with nickel plated outer contacts. teflon is a trademark of e.i. dupont de nemours and company.
bnc connectors, 50 ohm l max. 14.53 [.572] dia. max. plugs, crimp l max. single crimp 14.53 [.572] dia. max. hex and o crimp interchangeable dies certi-crimp for pro-crimper interchangeable rg/u termination body dim. hand tool hand tool 354940-1 dies for hand part no. cable type plating dielectric style l with or t ool 69710-1 integral die pro-crimper & 626 pneu. adapter 679304-1 head 318161-1 178, 178a, 33.33 178b, single crimp silver teflon mil type 69245-4 69471 - 5330876 -0 196, 196a 1.312 hex crimp nickel polyethylene commercial 33.53 58436-3 2-5221128-1 1.320 o crimp nickel polyethylene commercial 27.69 220009-5 318450-2 220217-3 1-5227079-6 174, 1.090 188, 188a, o crimp nickel teflon mil type 30.18 1424050-1 220026-1 5225395-7 316 1.188 single crimp silver teflon mil type 33.33 69245-2 69422 - 2-5330061-1 1.312 hex crimp nickel polyethylene commercial 33.53 58436-3 2-5221128-3 179, 179a, 1.320 179b, 161, o crimp nickel polyethylene commercial 27.69 1424050-1 220217-3 2-5227079-2 187, 187a, 1.090 belden o crimp nickel teflon mil type - 30.18 220026-1 5225395-8 9221 1.188 single crimp silver teflon mil type 33.33 91910-1 69408 - 2-5329446-1 1.312 rd 316, 188, o crimp nickel polyethylene commercial 27.69 69477-4 58539-1 8-5227079-2 double braid 1.090 hex crimp nickel polyethylene commercial 33.53 58436-1 2 2-5221128-7 belden 1.320 8219 o crimp nickel polyethylene commercial 27.69 220187-1 58435-1 1 220217-1 6-5227079-7 3 1.090 belden 9907, 89907 comm/ o crimp nickel polyethylene commercial 27.69 220187-1 318452-2 220217-1 6-5227079-8 4 scope 2104 1.090 o crimp nickel polyethylene commercial 27.69 69477-4 58539-1 58376-1 1-5227079-9 belden 1.090 8218 o crimp nickel teflon mil type 30.18 91904-1 69669-2 1-5225395-0 1.188 1 order tyco electronics pro-crimper coaxial ? crimp hand tool assembly 58433-1, which includes dies 58435-1. 2 order tyco electronics pro-crimper coaxial hex crimp hand tool assembly 58433-2, which includes dies 58436-1. 3 f or use with belden 9907 cable, comm/scope 3104 cable, and belden 8219 cable only. 4 f or use with belden 89907 cable, and comm/scope 2104 cable only. 47 catalog 1307191 dimensions are in millimeters dimensions are shown for usa: 1-800-522-6752 south america: 55-11-2103-6000 revised 3-07 and inches unless otherwise reference purposes only. canada: 1-905-470-4425 hong kong: 852-2735-1628 specified. values in brackets specifications subject mexico: 01-800-733-8926 japan: 81-44-844-8013 www.tycoelectronics.com are standard equivalents. to change. c. america: 52-55-1106-0803 uk: 44-8706-080-208 rf coax connectors note: pa rt numbers are rohs compliant except: indicates non-rohs compliant. belden is a trademark of belden wire and cable company. comm/scope is a trademark of commscope, inc. teflon is a trademark of e.i. dupont de nemours and company.
48 catalog 1307191 dimensions are in millimeters dimensions are shown for usa: 1-800-522-6752 south america: 55-11-2103-6000 revised 3-07 and inches unless otherwise reference purposes only. canada: 1-905-470-4425 hong kong: 852-2735-1628 specified. values in brackets specifications subject mexico: 01-800-733-8926 japan: 81-44-844-8013 www.tycoelectronics.com are standard equivalents. to change. c. america: 52-55-1106-0803 uk: 44-8706-080-208 rf coax connectors bnc connectors, 50 ohm (continued) plugs, crimp (continued) l max. 14.53 [.572] dia. max. l max. single crimp 14.53 [.572] dia. max. hex and o crimp interchangeable dies certi-crimp for pro-crimper interchangeable rg/u termination body dim. hand tool hand tool 354940-1 dies for hand part no. cable type plating dielectric style l with or t ool 69710-1 integral die pro-crimper & 626 pneu. adapter 679304-1 head 318161-1 hex crimp nickel polyethylene commercial 33.53 58436-1 2 5221128-1 3 1.320 o crimp nickel polyethylene commercial 27.69 220187-1 58435-1 1 220217-1 5227079-5 58, 58a, 1.090 58b, 58c o crimp nickel teflon mil type 33.74 2 69478-1 220189-3 69727 - 5225395-1 1.328 single crimp silver teflon mil type 33.33 2 91904-4 69223-1 2-5329444-1 1.312 belden hex crimp nickel polyethylene commercial 33.53 58436-1 2 1-5221128-0 88240, 1.320 berk-tek o crimp nickel polyethylene commercial 33.33 220187-1 58435-1 1 220217-1 4-5227079-3 btdc-58, 1.312 comm/ o crimp nickel teflon mil type 33.33 2 69478-1 220189-3 69727 - 4-5225395-2 scope 2135 1.312 o crimp nickel polyethylene commercial 27.69 220187-1 58435-1 1 220217-1 5227079-6 223, 1.280 55, 55a, o crimp nickel teflon mil type 43.64 2 69478-1 220189-3 69727 - 5225395-3 55b 1.718 single crimp silver teflon mil type 33.33 91904-3 69424 - 2-5329444-2 1.312 o crimp nickel polyethylene commercial 27.69 220187-1 58435-1 1 220217-1 6-5227079-1 1.090 142, 142a, o crimp nickel teflon mil type 30.18 2 69478-1 220189-3 69727 - 5225395-6 142b, 400 1.188 single crimp silver teflon mil type 33.33 2 69331-1 69429-1 2-5330358-2 1.312 consult tyco electronics for recommended crimp tooling. 1 order tyco electronics pro-crimper coaxial ? crimp hand tool assembly 58433-1, which includes dies 58435-1. 2 order tyco electronics pro-crimper coaxial hex crimp hand tool assembly 58433-2, which includes dies 58436-1. 3 bulk packaged. note: pa rt numbers are rohs compliant except: indicates non-rohs compliant. belden is a trademark of belden wire and cable company. berk-tek is a trademark of nexans, inc. comm/scope is a trademark of commscope, inc. teflon is a trademark of e.i. dupont de nemours and company.
bnc connectors, 50 ohm (continued) plugs, crimp (continued) interchangeable dies certi-crimp for pro-crimper interchangeable rg/u termination body dim. hand tool hand tool 354940-1 dies for hand part no. cable type plating dielectric style l with or t ool 69710-1 integral die pro-crimper & 626 pneu. adapter 679304-1 head 318161-1 hex crimp nickel polyethylene commercial 33.53 58436-1 2 1-5221128-1 1.320 o crimp nickel polyethylene commercial 27.69 220187-2 58435-1 1 220217-2 5227079-7 124, 140, 210, 1.090 62, 62a, 62b, o crimp nickel polyethylene commercial 27.69 220187-2 58435-1 1 220217-2 1-5227079-1 59, 59a, 59b, 1.090 belden 9291, o crimp nickel teflon mil type 30.18 58537-1 5225395-2 9209, 9269 1.188 single crimp silver teflon mil type 33.33 69141-1 2-5329445-1 1.312 302, belden 88241, 89269, hex crimp nickel polyethylene commercial 33.53 58436-1 2 1-5221128-1 hi-temp 62a, 1.320 t imes pl62, berk-tek, btdc-59, o crimp nickel teflon mil type 34.14 69477-1 58537-1 69669-1 4-5225395-1 btdc-62 1.344 hi-temp 59, t imes pl59, o crimp nickel polyethylene commercial 33.33 58537-1 5-5227079-3 plf59 (20 awg c.c.) 1.312 belden 9104, 9240, hex crimp nickel polyethylene commercial 33.53 58436-1 2 1-5221128-7 9112, 9167, 1.320 9259, 9266, t imes o crimp nickel teflon mil type 30.94 2 58537-1 69669-1 2-5225395-0 fm-59 1.218 belden 8281, 9141, 9231, single crimp silver polypropylene mil type 41.50 69652 - 220000 -1 5330878 w estern electric 1.634 724, 728, 3049 8, 8a, o crimp silver teflon mil type 27.31 220015-1 5225886-1 213 1.075 11, 11a o crimp silver teflon mil type 47.63 220015-1 5225886-4 1.875 belden 9914, o crimp silver teflon mil type 47.63 220015-1 5225886-7 t imes fm-8 1.875 alpha 9847, o crimp silver teflon mil type 47.63 220015-1 225886-5 belden 8213, 9292 1.875 9, 9a, 9b, o crimp silver teflon mil type 52.38 220015-1 5225886-1 214 2.062 1 order tyco electronics pro-crimper coaxial ? crimp hand tool assembly 58433-1, which includes dies 58435-1. 2 order tyco electronics pro-crimper coaxial hex crimp hand tool assembly 58433-2, which includes dies 58436-1. 2 ty co electronics pro-crimper ii hand tool frame without dies part no. 354940-1 l max. 14.53 [.572] dia. max. l max. single crimp 14.53 [.572] dia. max. hex and o crimp 49 catalog 1307191 dimensions are in millimeters dimensions are shown for usa: 1-800-522-6752 south america: 55-11-2103-6000 revised 3-07 and inches unless otherwise reference purposes only. canada: 1-905-470-4425 hong kong: 852-2735-1628 specified. values in brackets specifications subject mexico: 01-800-733-8926 japan: 81-44-844-8013 www.tycoelectronics.com are standard equivalents. to change. c. america: 52-55-1106-0803 uk: 44-8706-080-208 rf coax connectors note: pa rt numbers are rohs compliant except: indicates non-rohs compliant. belden is a trademark of belden wire and cable company. berk-tek is a trademark of nexans, inc. teflon is a trademark of e.i. dupont de nemours and company.
50 catalog 1307191 dimensions are in millimeters dimensions are shown for usa: 1-800-522-6752 south america: 55-11-2103-6000 revised 3-07 and inches unless otherwise reference purposes only. canada: 1-905-470-4425 hong kong: 852-2735-1628 specified. values in brackets specifications subject mexico: 01-800-733-8926 japan: 81-44-844-8013 www.tycoelectronics.com are standard equivalents. to change. c. america: 52-55-1106-0803 uk: 44-8706-080-208 rf coax connectors bnc connectors, 50 ohm (continued) right-angle plugs, crimp l max. 14.53 [.572] dia. max. 26.57 [1.046] l max. 14.53 [.572] dia. max. 26.57 [1.046] single crimp hex and o crimp interchangeable dies certi-crimp for pro-crimper interchangeable rg/u termination center body dim. hand tool hand tool 354940-1 dies for hand cable type contact plating dielectric style l with or t ool 69710-1 part no. plating integral die pro-crimper & 626 pneu. adapter 679304-1 head 318161-1 174, 188, hex crimp gold nickel polymethyl- commercial 39.45 58436-3 5413959-3 188a, 316 pentene 1.553 single crimp gold silver teflon mil type 44.45 91910-1 69422 - 5331178 -0 1.750 179, 179a, 39.45 179b, 161, hex crimp gold nickel polymethyl- commercial 1.553 58436-3 5413959-4 187, 187a, pentene belden 9221 180, 180a, 180b, hex crimp gold nickel polymethyl- commercial 39.45 58436-3 5413959-5 195, 195a pentene 1.553 belden 9907, 89907, 8219, hex crimp gold nickel polymethyl- commercial 39.45 58436-1 5413959-6 comm/scope pentene 1.553 2104, 3104 hex crimp gold nickel polymethyl- commercial 39.45 58436-1 5413959-1 pentene 1.553 58, 58a, o crimp gold nickel teflon mil type 37.29 69478-1 220189-3 69727-1 5225974-1 58b, 58c 1.468 single crimp gold silver teflon mil type 44.45 91904-1 69223-1 5331175 -0 1.750 o crimp gold nickel teflon mil type 37.29 69478-1 220189-3 69727-1 5225974-2 55, 55a, 1.468 55b, 223 single crimp gold silver teflon mil type 44.45 91904-3 69429-1 5331182 -0 1.750 142, 142a, single crimp gold silver teflon mil type 44.45 69331-1 69429-1 5331182 -0 142b, 400 1.750 124, 140, 210, 62, 62a, 62b, 37.29 59, 59a, 59b, o crimp gold nickel teflon mil type 1.468 58537-1 69669-1 5225974-5 belden 9291, 9209, 9269 38.10 [1.500] 14.53 [.572] dia. max. plugs, twist-on related product data t wist-on plugs must be used with cable that has a solid conductor. these plugs are not recommended for applications where the cable frequently moves or flexes. mating twist-on jack page 52 rg/u contact body dielectric style part no. cable plating plating 59, 59a, gold nickel p olymethyl- commercial 5414265-3 59b pentene note: pa rt numbers are rohs compliant except: indicates non-rohs compliant. belden is a trademark of belden wire and cable company. comm/scope is a trademark of commscope, inc. teflon is a trademark of e.i. dupont de nemours and company.
bnc connectors, 50 ohm (continued) l max. 11.1 [.437] dia. max. 11.08 [.436] dia. max. l max. single crimp hex and o crimp jacks, crimp interchangeable dies certi-crimp for pro-crimper interchangeable rg/u termination center body dim. hand tool hand tool 354940-1 dies for hand cable type contact plating dielectric style l with or t ool 69710-1 part no. plating integral die pro-crimper & 626 pneu. adapter 679304-1 head 318161-1 hex crimp gold nickel polymethyl- commercial 33.02 58436-3 5413779-3 pentene 1.300 o crimp gold nickel polypro- commercial 30.48 1424050-1 220217-3 5228979-7 174, 188, pylene 1.200 188a, 316 o crimp gold nickel teflon mil type - 30.48 1424050-1 220026-1 5225396-7 1.200 single crimp gold silver teflon mil type 33.33 69422 - 2-5330062-1 1.312 179, 179a, 179b, 161, hex crimp gold nickel polymethyl- commercial - 33.02 58436-3 2-5413779-4 187, 187a, pentene 1.300 belden 9221 o crimp gold nickel polypro- commercial 30.48 220187-1 58435-1 1 220217-1 5228979-5 58, 58a, pylene 1.200 58b, 58c o crimp gold nickel teflon mil type 30.48 2 91901-1 69727 - 5225396-1 1 1.200 223, 55, single crimp gold silver teflon mil type 33.33 69140-2 91904-3 69424 - 2-5329452-2 55a, 55b 1.312 124, 140, 210, o crimp gold nickel polypro- commercial 30.48 220187-2 58435-1 1 220217-2 5228979-6 62, 62a, 62b, pylene 1.200 59, 59a, 59b, belden 9291, o crimp gold nickel teflon mil type 30.48 58537-1 2 69669-1 5225396-2 9209, 9269 1.200 1 order tyco electronics pro-crimper coaxial ? crimp hand tool assembly 58433-1, which includes dies 58435-1. 51 catalog 1307191 dimensions are in millimeters dimensions are shown for usa: 1-800-522-6752 south america: 55-11-2103-6000 revised 3-07 and inches unless otherwise reference purposes only. canada: 1-905-470-4425 hong kong: 852-2735-1628 specified. values in brackets specifications subject mexico: 01-800-733-8926 japan: 81-44-844-8013 www.tycoelectronics.com are standard equivalents. to change. c. america: 52-55-1106-0803 uk: 44-8706-080-208 rf coax connectors note: pa rt numbers are rohs compliant except: indicates non-rohs compliant. belden is a trademark of belden wire and cable company. teflon is a trademark of e.i. dupont de nemours and company.
52 catalog 1307191 dimensions are in millimeters dimensions are shown for usa: 1-800-522-6752 south america: 55-11-2103-6000 revised 3-07 and inches unless otherwise reference purposes only. canada: 1-905-470-4425 hong kong: 852-2735-1628 specified. values in brackets specifications subject mexico: 01-800-733-8926 japan: 81-44-844-8013 www.tycoelectronics.com are standard equivalents. to change. c. america: 52-55-1106-0803 uk: 44-8706-080-208 rf coax connectors bnc connectors, 50 ohm (continued) jacks, twist-on related product data t wist-on jacks must be used with cable that has a solid conductor. these jacks are not recommended for applications where the cable frequently moves or flexes. mating twist-on plug page 50 rg/u center body dielectric style part no. cable contact plating 59, 59a, 59b gold nickel acetal commercial 222428-1 40.14 [1.580] max. panel jacks, crimp 28.96 [1.140] max. 2.77 [.109] 12.7 ?.1 [.500 ?004 ] 12.7 ?.1 [.500 ?004 ] recommended panel cutout interchangeable dies certi-crimp for pro-crimper interchangeable rg/u termination center body hand tool hand tool 354940-1 dies for hand cable type contact plating dielectric style with or t ool 69710-1 part no. plating integral die pro-crimper & 626 pneu. adapter 679304-1 head 318161-1 174, 188, 188a, 316 o crimp gold nickel teflon mil type 1424050-1 220026-1 5225397-7 58, 58a, 58b, 58c o crimp gold nickel teflon mil type - 69478-1 91901-1 69727 - 5225397-1 124, 140, 210, 62, 62a, 62b, 59, 59a, 59b, belden 9291, o crimp gold nickel teflon mil type - 69477-1 2 58537-1 2 69669-1 5225397-2 9209, 9269, 89269 dia. 11.2 [.441] dia. 17.84 [.702] max. note: pa rt numbers are rohs compliant except: indicates non-rohs compliant. belden is a trademark of belden wire and cable company. teflon is a trademark of e.i. dupont de nemours and company.
53 catalog 1307191 dimensions are in millimeters dimensions are shown for usa: 1-800-522-6752 south america: 55-11-2103-6000 revised 3-07 and inches unless otherwise reference purposes only. canada: 1-905-470-4425 hong kong: 852-2735-1628 specified. values in brackets specifications subject mexico: 01-800-733-8926 japan: 81-44-844-8013 www.tycoelectronics.com are standard equivalents. to change. c. america: 52-55-1106-0803 uk: 44-8706-080-208 rf coax connectors bnc connectors, 50 ohm (continued) bulkhead jacks, crimp note: p anel insulating bushings page 54 h l max. h l max. 11.04 [.435] min. 12.82 [.505] dia. min. 12.83 [.505 ] +0.13 -0.00 +.005 -.000 recommended p anel cutouts maximum panel thickness 3.18 [.125] single crimp hex and o crimp h = 11/16" across flats, 20.32 [.800] max. across points dia. 5.54 [.218 ] +0.08 -0.00 +.003 -.000 interchangeable dies certi-crimp for pro-crimper interchangeable rg/u termination center body dim. hand tool hand tool 354940-1 dies for hand cable type contact plating dielectric style l with or t ool 69710-1 part no. plating integral die pro-crimper & 626 pneu. adapter 679304-1 head 318161-1 hex crimp gold nickel polymethyl- commercial 36.83 58436-3 5413771-3 pentene 1.450 o crimp gold nickel polypro- commercial 34.93 220217-3 5228980-7 174, 188, pylene 1.375 188a, 316 o crimp gold nickel teflon mil type 35.71 220026-1 5225398-7 1.406 single crimp gold silver teflon mil type 32.13 69422 - 2-5330063-1 1.265 179, 179a, o crimp gold nickel teflon mil type 35.71 1424050-1 220026-1 5225398-8 179b, 161, 1.406 187, 187a, single crimp gold silver teflon mil type 32.13 91910-1 69408 - 2-5329458-1 belden 9221 1.265 t imes rd316 o crimp gold nickel teflon mil type 35.71 91904-1 69669-2 1-5225398-5 1.406 note: pa rt numbers are rohs compliant except: indicates non-rohs compliant. belden is a trademark of belden wire and cable company. teflon is a trademark of e.i. dupont de nemours and company.
54 catalog 1307191 dimensions are in millimeters dimensions are shown for usa: 1-800-522-6752 south america: 55-11-2103-6000 revised 3-07 and inches unless otherwise reference purposes only. canada: 1-905-470-4425 hong kong: 852-2735-1628 specified. values in brackets specifications subject mexico: 01-800-733-8926 japan: 81-44-844-8013 www.tycoelectronics.com are standard equivalents. to change. c. america: 52-55-1106-0803 uk: 44-8706-080-208 rf coax connectors panel insulating bushings for bulkhead jacks material nylon note: can not be used with single crimp bulkhead jacks. pa rt no. 330620 (2 required) 14.73 ?.13 [.580 ?005 ] dia. 14.1 ?.08 [.555 ?003 ] 13.95 [.549] dia. 14.58 [.574] 5.46 [.215] 0.89 [.035] 0.81 [.032] 12.93 [.509] dia. 17.45 [.687] dia. recommended panel cutout dia. bnc connectors, 50 ohm (continued) h l max. bulkhead jacks, crimp (continued) note: p anel insulating bushings at the bottom of this page single crimp hex and o crimp interchangeable dies certi-crimp for pro-crimper interchangeable rg/u termination center body dim. hand tool hand tool 354940-1 dies for hand cable type contact plating dielectric style l with or t ool 69710-1 part no. plating integral die pro-crimper & 626 pneu. adapter 679304-1 head 318161-1 58, 58a, 58b, 58c, belden 88240, hex crimp gold nickel polymethyl- commercial 36.83 58436-1 5413771-1 berk-tek pentene 1.450 btdc-58, comm/scope 2135 o crimp gold nickel polypro- commercial 34.93 220187-1 58435-1 1 220217-1 5228980-5 pylene 1.375 58, 58a, o crimp gold nickel teflon mil type 41.28 91901-1 69727 - 5225398-1 58b, 58c 1.625 single crimp gold silver teflon mil type 32.13 91904-4 69223-1 2-5329456-1 1.265 223, o crimp gold nickel teflon mil type 35.71 91901-1 69727 - 5225398-3 55, 55a, 55b 1.406 142, 142a, o crimp gold nickel teflon mil type 35.71 91901-1 69727 - 5225398-6 142b, 400 1.406 124, 140, 210, 62, 62a, 62b, 59, 59a, 59b, o crimp gold nickel polypro- commercial 34.93 220187-2 58435-1 1 220217-2 5228980-6 belden 9291, pylene 1.375 9209, 9269 1 order tyco electronics pro-crimper coaxial ? crimp hand tool assembly 58433-1, which includes dies 58435-1. h l max. 11.04 [.435] min. 12.82 [.505] dia. min. 12.83 [.505 ] +0.13 -0.00 +.005 -.000 recommended p anel cutouts maximum panel thickness 3.18 [.125] h = 11/16" across flats, 20.32 [.800] max. across points dia. 5.54 [.218 ] +0.08 -0.00 +.003 -.000 note: pa rt numbers are rohs compliant except: indicates non-rohs compliant. belden is a trademark of belden wire and cable company. berk-tek is a trademark of nexans, inc. comm/scope is a trademark of commscope, inc. teflon is a trademark of e.i. dupont de nemours and company.
bnc connectors, 50 ohm (continued) w dia. max. l max. 3/8" - 32 thread accepts 1.5 [.059] dia. max. wire bulkhead solder jacks, front mount body plating nickel without solder terminal w dia. max. l max. 3/8" - 32 thread accepts 1.5 [.059] dia. max. wire 22.23 [.875] with solder terminal recommended panel cutout .396/4.04 [.156/.159] 9.65/9.75 [.380/.384] dia. dimensions p anel insulating part no. contact dielectric lw thickness bushing without solder with solder material t erminal* terminal** silver valox 26.93 13.09 1.17-3.18 227223-1 or 5227754-3 5227755-3 1.060 .515 .046-.125 221951-1 33.33 13.09 1.17-6.35 227223-1 or 5227169-7 v alox 1.312 .515 .046-.250 221951-1 26.93 13.09 1.17-3.18 227223-1 or 5227754-2 5227755-2 gold 1.060 .515 .046-.125 221951-1 33.33 13.09 1.17-6.35 227223-1 or 5227169-4 5227169-8 teflon 1.312 .515 .046-.250 221951-1 26.93 13.09 1.17-3.18 227223-1 or 5227715-3 5227716-3 1.060 .515 .046-.125 221951-1 33.33 13.09 1.17-6.35 227223-1 or 5227169-5 tin valox 1.312 .515 .046-.250 221951-1 26.93 13.09 1.17-3.18 227223-1 or 5227754-1 5227755-1 1.060 .515 .046-.125 221951-1 * *includes lockwasher and jam nut. **includes solder terminal and jam nut. plugs, for jis cables, crimp plating body ?nickel center contact ?gold 14.53 [.572] dia. max. l max. interchangeable dies f or pro-crimper t ermination dim. hand tool 354940-1 part no. jis cable t ype dielectric lor pro-crimper adapter 679304-1 3d-2v hex crimp polyethylene 33.53 58436-1 3-5221128-1 1.320 55 catalog 1307191 dimensions are in millimeters dimensions are shown for usa: 1-800-522-6752 south america: 55-11-2103-6000 revised 3-07 and inches unless otherwise reference purposes only. canada: 1-905-470-4425 hong kong: 852-2735-1628 specified. values in brackets specifications subject mexico: 01-800-733-8926 japan: 81-44-844-8013 www.tycoelectronics.com are standard equivalents. to change. c. america: 52-55-1106-0803 uk: 44-8706-080-208 rf coax connectors note: pa rt numbers are rohs compliant except: indicates non-rohs compliant. teflon is a trademark of e.i. dupont de nemours and company. v alox is a trademark of general electric company.
insulating bushings recommended p anel cutout recommended p anel cutout 1.78 [.070] 0.81 [.032] 12.7 [.500] dia. 3.94 [.155] 11.94 [.470] 11.43 [.450] 9.53 [.375] pa rt no. 221951-1 pa rt no. 227223-1 12.83 ?.08 [.505 ?003 ] dia. 12.07 ?.08 [.475 ?003 ] 11.56 ?.08 [.455 ?003 ] dia. 10.97 ?.06 [.432 ?003 ] 0.94 [.030] max. dia. 15.88 [.625] dia. 9.53 [.375] dia. 10.93 [.430] dia. 4.04 [.159] max. 1.09 [.043] max. 14.86 [.585] dia. 56 catalog 1307191 dimensions are in millimeters dimensions are shown for usa: 1-800-522-6752 south america: 55-11-2103-6000 revised 3-07 and inches unless otherwise reference purposes only. canada: 1-905-470-4425 hong kong: 852-2735-1628 specified. values in brackets specifications subject mexico: 01-800-733-8926 japan: 81-44-844-8013 www.tycoelectronics.com are standard equivalents. to change. c. america: 52-55-1106-0803 uk: 44-8706-080-208 rf coax connectors bnc connectors, 50 ohm (continued) 12.83 [.505] max. 3/8" - 24 thread 26.80 [1.055] max. isolated bulkhead solder jacks, front mount plating body nickel dielectric white v alox p anel thickness 1.17-6.35 [.046-.250] recommended p anel cutout 31.75 [1.250] 13.09 dia. [.515] max. 3/8" - 24 thread accepts 1.5 [.059] dia. max. wire p anel thickness 1.17-3.18 [.046-.125] recommended p anel cutout pa rt no. 5414194-1 plating body nickel center contact silver dielectric black v alox flange & thread material black v alox center flange & part contact thread no. plating material ti nv alox 5227726-1 silver valox 5227726-2 gold valox 5227726-3 max. 9.91 [.390 ] +0.13 -0.2 0 +.005 -.000 dia. 3.89 [.153 ] +0.08 -0.00 +.003 -.000 9.60 [.378 ] +0.08 -0.00 +.003 -.000 dia. 3.94 [.155 ] +0.08 -0.00 +.003 -.000 sealed bulkhead solder jack, rear mount pa rt no. 5227426-1 17.78 dia. [.700] max. 31.75 [1.250] maximum panel thickness 6.35 [.250] recommended p anel cutout 1/2" - 28 thread rubber gasket accepts . 1.5 [.059] dia. max. wire 12.83 [.505 ] +0.13 -0.00 +.005 -.000 dia. 5.54 [.218 ] +0.08 -0.00 +.003 -.000 max. plating body nickel center contact gold dielectric polymethylpentene this connector is designed to prevent moisture from entering the interface from the rear of the connector. note: pa rt numbers are rohs compliant except: indicates non-rohs compliant. v alox is a trademark of general electric company.
57 catalog 1307191 dimensions are in millimeters dimensions are shown for usa: 1-800-522-6752 south america: 55-11-2103-6000 revised 3-07 and inches unless otherwise reference purposes only. canada: 1-905-470-4425 hong kong: 852-2735-1628 specified. values in brackets specifications subject mexico: 01-800-733-8926 japan: 81-44-844-8013 www.tycoelectronics.com are standard equivalents. to change. c. america: 52-55-1106-0803 uk: 44-8706-080-208 rf coax connectors bnc connectors, 50 ohm (continued) c l c l recommended pc board layouts without mounting posts with mounting posts (top view) maximum panel thickness 6.1 [.240] recommended panel cutout 10.16 ?.08 [.400 ?003 ] 5.08 ?.05 [.200 ?002 ] 2.54 ?.05 [.100 ?002 ] gs 0.89 ?.08 [.035 ?003 ] 2.64 [.104] dia. clearance hole for 2-56 self-tapping screw* (2 holes) 5.08 ?.05 [.200 ?002 ] 2.01 ?.05 [.079 ?002 ] (2 holes) mating f ace right-angle jacks pc board/panel mount body nickel dielectric polymethylpentene a b 34.93 [1.375] c mtg. hgt. 1/2-28 thread 1/2-28 thread v alox body a b 34.93 [1.375] metal body c mtg. hgt. (top view) 10.16 ?.08 [.400 ?003 ] 5.08 ?.05 [.200 ?002 ] 2.54 ?.05 [.100 ?002 ] gs 0.89 ?.08 [.035 ?003 ] 5.08 ?.05 [.200 ?002 ] mating f ace body center dimensions part no. contact without with l with l material plating abc mounting posts mounting posts compliant posts tin 8.59 21.21 15.88 5226990-1 5227161-1 3.48 .338 .835 .625 .137 v alox, gold1 8.59 21.21 15.88 5226990-3 5227161-3 3.48 white .338 .835 .625 .137 gold1 6.91 21.21 13.18 5227161-7 3.48 .272 .835 .519 .137 tin 8.59 21.21 15.88 5227161-2 3.48 .338 .835 .625 .137 gold1 8.59 21.21 15.88 5226990-6 5227161-6 3.48 v alox, .338 .835 .625 .137 black gold1 6.91 21.21 13.18 5227161-9 3.48 .272 .835 .519 .137 gold1 6.17 21.21 11.68 5415046-1 .243 .835 .460 tin 8.26 20.83 15.88 5227661-1 3.48 .325 .820 .625 .137 gold1 8.26 20.83 15.88 5227676-1 5227677-1 3.48 metal .325 .820 .625 .137 gold1 6.91 20.83 12.70 1274668-1 5413879-1 3.48 .272 .820 .500 .137 gold2 6.91 20.83 12.70 5413879-2 3.48 .272 .820 .500 .137 high temp. gold1 6.91 21.21 13.18 5415218-5 2.79 housing .272 .835 .519 .110 plating: gold1 0.00076 [.000030] thick gold2 0.00127 [.000050] thick note: if an insulating bushing is required see part number 330620 and panel cutout on page 54. mounting post style compliant post l e 12.83 [.505 ] +0.13 -0.00 +.005 -.000 dia. dia. 5.54 [.218 ] +0.08 -0.00 +.003 -.000 l lockwasher and jam nut part no. 1-329632-2 part no. 1-329631-2 note: pa rt numbers are rohs compliant except: indicates non-rohs compliant. v alox is a trademark of general electric company.
58 catalog 1307191 dimensions are in millimeters dimensions are shown for usa: 1-800-522-6752 south america: 55-11-2103-6000 revised 3-07 and inches unless otherwise reference purposes only. canada: 1-905-470-4425 hong kong: 852-2735-1628 specified. values in brackets specifications subject mexico: 01-800-733-8926 japan: 81-44-844-8013 www.tycoelectronics.com are standard equivalents. to change. c. america: 52-55-1106-0803 uk: 44-8706-080-208 rf coax connectors bnc connectors, 50 ohm (continued) ve rtical jacks pc board/panel mount plating body nickel dielectric polymethylpentene 10.16 ?.08 [.400 ?003 ] 5.08 ?.05 [.200 ?002 ] 5.08 ?.05 [.200 ?002 ] 2.64 [.104] dia. clearance hole f or 2-56 self-tapping screw* (2 holes) 2.54 ?.05 [.100 ?002 ] 0.89 ?.08 [.035 ?003 ] gs 5.08 ?.05 [.200 ?002 ] 5.08 ?.05 [.200 ?002 ] 2.54 ?.05 [.100 ?002 ] 0.89 ?.08 [.035 ?003 ] 2.01 ?.08 [.079 ?003 ] (2 holes) gs (top view) (top view) l b 1/2-28 thread 34.93 [1.375] mtg. hgt. 15.88 [.625] l b 1/2-28 thread 34.93 [1.375] mtg. hgt. 15.88 [.625] * screw for board thickness of 2.38 [.093] or greater pa rt no. 221108-2. screw for thickness of less than 2.38 [.093] pa rt no. 221108-4. without mounting posts with mounting posts 10.16 ?.08 [.400 ?003 ] 10.16 ?.08 [.400 ?003 ] 10.16 ?.08 [.400 ?003 ] v alox body metal body lockwasher and jam nut part no. 1-329632-2 part no. 1-329631-2 part no. body center dim. dim. without with material contact bl mounting mounting plating p osts posts tin 21.21 3.48 5226993-1 5227222-1 v alox, .835 .137 white gold 21.21 3.48 5226993-3 5227222-3 .835 .137 tin 21.21 3.48 5226993-2 5227222-2 v alox, .835 .137 black gold 21.21 3.48 5226993-6 5227222-6 .835 .137 tin 20.83 3.48 5227671-1 metal .820 .137 gold 20.83 3.48 5227673-1 .820 .137 note: if an insulating bushing is required see part number 330620 and p anel cutout on page 54. recommended pc board layouts maximum panel thickness 6.1 [.240] recommended panel cutout 12.83 [.505 ] +0.13 -0.00 +.005 -.000 dia. dia. 5.54 [.218 ] +0.08 -0.00 +.003 -.000 note: pa rt numbers are rohs compliant except: indicates non-rohs compliant. v alox is a trademark of general electric company.
59 catalog 1307191 dimensions are in millimeters dimensions are shown for usa: 1-800-522-6752 south america: 55-11-2103-6000 revised 3-07 and inches unless otherwise reference purposes only. canada: 1-905-470-4425 hong kong: 852-2735-1628 specified. values in brackets specifications subject mexico: 01-800-733-8926 japan: 81-44-844-8013 www.tycoelectronics.com are standard equivalents. to change. c. america: 52-55-1106-0803 uk: 44-8706-080-208 rf coax connectors bnc connectors, 50 ohm (continued) c l 8.59 [.338] 34.93 [1.375] 21.21 [.835] 15.88 [.625] mounting height 1/2-28 thread jacks with mounting flanges pc board/panel mount (top view) 2.54 [.100] s g 11.43 [.450] 22.86 ?.08 [.900 ?003 ] 0.89 ?.08 [.035 ?003 ] 8.89 [.350] 3.3 [.130] dia. clearance hole f or 5-40 screw lockwasher and jam nut part no. 1-329632-2 part no. 1-329631-2 mating f ace maximum panel thickness 6.1 [.240] recommended panel cutout body center contact part no. material plating v alox, tin 5226978-1 white gold 5226978-3 recommended pc board layout 12.83 [.505 ] +0.13 -0.00 +.005 -.000 dia. dia. 5.54 [.218 ] +0.08 -0.00 +.003 -.000 note: pa rt numbers are rohs compliant except: indicates non-rohs compliant. v alox is a trademark of general electric company.
60 catalog 1307191 dimensions are in millimeters dimensions are shown for usa: 1-800-522-6752 south america: 55-11-2103-6000 revised 3-07 and inches unless otherwise reference purposes only. canada: 1-905-470-4425 hong kong: 852-2735-1628 specified. values in brackets specifications subject mexico: 01-800-733-8926 japan: 81-44-844-8013 www.tycoelectronics.com are standard equivalents. to change. c. america: 52-55-1106-0803 uk: 44-8706-080-208 rf coax connectors bnc connectors, 50 ohm (continued) ve rtical metalized jacks pc board mount 17.45 [.687] 15.88 [.625] drill holes for 0.94 ?.05 [.037 .002 ] dia. pin (5 places) 6.35 ?.05 [.250 ?002 ] 12.7 ?.08 [.500 ?003 ] 6.35 ?.05 [.250 ?002 ] 12.7 ?.08 [.500 ?003 ] 3.73 [.147] 4.32 [.170] 1.07 ?.05 [.042 ?002 ] dia. 1.73 ?.05 [.068 ?002 ] dia. 6.48 [.255] 7.47 [.294] style d style a style c 6.88 ?.05 [.271 ?003 ] 3.43 ?.05 [.135 ?002 ] 6.88 ?.05 [.271 ?003 ] 1.32 ?.08 [.052 ?003 ] dia. 2.44 ?.08 [.096 ?003 ] (4 holes) dia. 15.88 [.625] 16.64 [.655] body center leg plating contact plating dielectric style length l part no. silver valox a 6.35 5227699-1 .250 gold valox a 6.35 5227699-2 .250 ti nv alox a 6.35 5227699-3 nickel .250 gold valox a 3.81 5414460-1 1 .150 silver valox c 4.45 5222420-1 .175 gold valox e 6.35 5415189-1 .250 gold teflon b 3.30 5413969-2 .130 t in-lead silver valox c 3.18 5414305-1 .125 gold valox d 3.43 5221123-2 .135 1 with .76 [.030] standoffs on top of legs. style b l l drill hole to receive 0.94 0.06 [.037 .002 ] dia. pin, 5 required 12.70 0.08 [.500 .003 ] 12.70 0.08 [.500 .003 ] 6.35 0.06 [.250 .002 ] style e (panel mount) l 20.57 [.810] l 6.88 ?.08 [.271 ?003 ] 3.43 ?.08 [.135 ?003 ] 1.02 ?.08 [.040 ?003 ] dia. 1.50 ?.08 [.059 ?003 ] (4 holes) dia. 3.44 ?.08 [.135 ?003 ] 6.88 ?.08 [.271 ?003 ] recommended pc board layouts l 20.78 0.38 [.818 .015] sq. note: pa rt numbers are rohs compliant except: indicates non-rohs compliant. teflon is a trademark of e.i. dupont de nemours and company. v alox is a trademark of general electric company.
61 catalog 1307191 dimensions are in millimeters dimensions are shown for usa: 1-800-522-6752 south america: 55-11-2103-6000 revised 3-07 and inches unless otherwise reference purposes only. canada: 1-905-470-4425 hong kong: 852-2735-1628 specified. values in brackets specifications subject mexico: 01-800-733-8926 japan: 81-44-844-8013 www.tycoelectronics.com are standard equivalents. to change. c. america: 52-55-1106-0803 uk: 44-8706-080-208 rf coax connectors bnc connectors, 50 ohm (continued) press fit vertical metalized jack, pc board mount insulating bushing material polypropylene part no. 222163-1 only to be used on part nos. 5222006-1 & 5222462-1 pa rt no. 5222006-1 14.61 [.575] 1.02 ?.08 [.040 ?003 ] dia. 6.88 ?.05 [.271 ?002 ] 3.43 ?.05 [.135 ?002 ] 6.88 ?.05 [.271 ?002 ] 20.57 [.810] max. 11.94 dia. [.470] max. recommended pc board layout pc board thickness not less than 0.99 [.093] dia. 11.94 [.470] dia. 2.96 [.115] max. 6.61 [.260] max. 1.5 [.059 ] dia. 4 holes +0.08 -0.1 0 +.003 -.004 ve rtical metalized jacks, pc board mount 24.00 [.945] 10.72 0.25 [.422 .010 ] 10.70 0.08 [.421 .003 ] 7.50 0.08 [.295 .003 ] 1.00 0.08 [.039 .003 ] 2 plcs. 1.50 0.08 [.059 .003 ] 2 plcs. 3.00 0.10 [.118 .004 ] 1.70 0.10 [.067 .004 ] 2.50 0.08 [.098 .003 ] 4 plcs. signal contact hole switching contact hole pa rt no. 1274314-1 (switching) 24.00 [.945] 10.72 0.25 [.422 .010 ] pa rt no. 1274315-1 recommended pc board layout 10.70 0.08 [.421 .003 ] 3.75 0.08 [.148 .003 ] 1.00 0.08 [.039 .003 ] 1.50 0.08 [.059 .003 ] 2 plcs. 3.00 0.10 [.118 .004 ] 1.70 0.10 [.067 .004 ] 2.50 0.08 [.098 .003 ] 3 plcs. recommended pc board layout body contact dielectric part plating plating no. tin silver polyphenylene 6274314-1 tin silver polyphenylene 6274315-1 note: pa rt numbers are rohs compliant except: indicates non-rohs compliant.
62 catalog 1307191 dimensions are in millimeters dimensions are shown for usa: 1-800-522-6752 south america: 55-11-2103-6000 revised 3-07 and inches unless otherwise reference purposes only. canada: 1-905-470-4425 hong kong: 852-2735-1628 specified. values in brackets specifications subject mexico: 01-800-733-8926 japan: 81-44-844-8013 www.tycoelectronics.com are standard equivalents. to change. c. america: 52-55-1106-0803 uk: 44-8706-080-208 rf coax connectors bnc connectors, 50 ohm (continued) recommended pc board layout 6.6 0.08 [.260 .003 ] 6.6 0.08 [.260 .003 ] 3.3 0.08 [.130 .003 ] 1.17 0.08 [.046 .003 ] 2.11 0.08 [.083 .003 ] dia. (4 holes) maximum pc board thickness 2.54 [.100] dia. c l 6.15 [.242] 10.97 [.432] mounting height 27.64 0.51 [1.088 .020 ] right-angle metalized jacks, pc board mount body dielectric center part plating contact length no. nickel polymethyl- 4.34 5413631-1 * pentene .171 ti n teflon 4.34 5413631-2 * .171 nickel polymethyl- 3.33 5413631-3 * pentene .131 body dielectric contact part no. nickel tpx gold 5414373-1 recommended pc board layouts 1.19 ?.18 [.047 ?007 ] dia. 7.62 ?.08 [.300 ?003 ] 1.78 ?.08 [.070 ?003 ] dia. 2 holes 7.62 ?.08 [.300 ?003 ] 3.81 ?.08 [.150 ?003 ] 8.64 [.340] 21.85 [.860] 25.40 [1 .000] right-angle metalized jacks, pc board/panel mount body part plating dielectric no. ti n teflon 5415025-2 tin tpx 5415025-1 lockwasher and jam nut see page 59. 6.6 0.08 [.260 .003 ] 6.6 0.08 [.260 .003 ] 3.3 0.08 [.130 .003 ] 1.17 0.08 [.046 .003 ] 2.11 0.08 [.083 .003 ] 4 holes dia. dia. 12.83 [.505 ] +0.13 -0.00 +.005 -.000 dia. dia. 5.64 [.222 ] +0.08 -0.00 +.003 -.000 maximum panel thickness 6.35 [.250] recommended panel cutout 1/2-28 thread 27.64 0.51 [1.088 .020 ] 10.97 0.18 [.432 .007 ] 6.15 0.25 [.242 .010 ] 11.66 [.459] 4.34 [.171] note: pa rt numbers are rohs compliant except: indicates non-rohs compliant. teflon is a trademark of e.i. dupont de nemours and company. tpx is a trademark of mitsui chemicals america, inc.
63 catalog 1307191 dimensions are in millimeters dimensions are shown for usa: 1-800-522-6752 south america: 55-11-2103-6000 revised 3-07 and inches unless otherwise reference purposes only. canada: 1-905-470-4425 hong kong: 852-2735-1628 specified. values in brackets specifications subject mexico: 01-800-733-8926 japan: 81-44-844-8013 www.tycoelectronics.com are standard equivalents. to change. c. america: 52-55-1106-0803 uk: 44-8706-080-208 rf coax connectors bnc connectors, 50 ohm (continued) t ee adapter covers material polypropylene, general purpose f 5.08 [.200] 15.11 [.595] 114.55 ? .76 [4.510 .030 ] color black ivory part no. 221586-1 221586-3 d e t ee adapters style a (jack-plug-jack) style b with insulated cover (jack-plug-jack) insulation material polyphenylene oxide style c (jack-jack-jack) e d f e d body center contact dimensions comparable packaging style material material dielectric ug/u no. part no. and plating and plating de f connector per pkg. brass, be cu, gold 32.54 26.19 14.27 bulk nickel (30) 2 teflon 1.281 1.031 .562 274a (100) 221543-2 ph br, gold 33.02 27.31 14.50 bulk (15) 2 acetal 1.300 1.075 .571 (100) 5413592-2 a be cu, gold 33.02 27.31 14.50 bulk zinc, (30) 2 acetal 1.300 1.075 .571 (100) 5413592-6 nickel ph br, gold 33.02 27.31 14.50 individual (15) 2 acetal 1.300 1.075 .571 (1) 3 5413592-9 be cu, silver 33.02 27.31 14.50 individual (200) 2 acetal 1.300 1.075 .571 (1) 1-5413592-1 b zinc, be cu, gold acetal 32.54 31.12 17.15 1 bulk nickel (30) 2 1.281 1.225 .675 (100) 5413366-2 1 brass, be cu, silver 32.54 23.37 bulk c nickel (200) 2 teflon 1.281 .920 (100) 221988-1 zinc, ph br, gold 32.54 23.62 bulk nickel (50) 2 acetal 1.281 .930 (100) 5414311-1 1 gray insulation cover 2 (microinches min thickness) 3 (special graphics) dia. dia. note: pa rt numbers are rohs compliant except: indicates non-rohs compliant. teflon is a trademark of e.i. dupont de nemours and company.
64 catalog 1307191 dimensions are in millimeters dimensions are shown for usa: 1-800-522-6752 south america: 55-11-2103-6000 revised 3-07 and inches unless otherwise reference purposes only. canada: 1-905-470-4425 hong kong: 852-2735-1628 specified. values in brackets specifications subject mexico: 01-800-733-8926 japan: 81-44-844-8013 www.tycoelectronics.com are standard equivalents. to change. c. america: 52-55-1106-0803 uk: 44-8706-080-208 rf coax connectors bnc connectors, 50 ohm (continued) 35.81 [1.410] 32.54 [1.281] right-angle adapters (jack-plug) 26.97 [1.062] bulkhead jack-jack adapters l max. h max. recommended panel cutout h = 11/16 across flats, 20.32 [.800] across points. 36.07 [1.420] 15.87 [.625] 22.89 [.901] max. 14.53 dia [.572] max. isolated bulkhead jack-jack adapter body center contact dielectric part no. plating plating nickel gold polymethylpentene 5414105-1 body center dimensions contact dielectric part no. plating plating hl nickel silver 17.45 38.10 teflon 330024 - .687 1.500 nickel gold1 17.78 36.07 poly- 5228226-1 .700 1.420 ethylene nickel gold2 17.78 36.07 poly- 5228226-3 .700 1.420 ethylene plating: gold1 0.00127 [.000050] thick gold2 0.00076 [.000015] thick note: if an insulating bushing is required see part number 330620 and p anel cutout on page 54. body center contact dielectric part no. plating plating nickel silver teflon 5329517 -1 nickel gold teflon 5222165-2 nickel gold polymethylpentene 5414666-1 12.83 [.505 ] +0.13 -0.00 +.005 -.000 dia. 5.54 [.218 ] +0.06 -0.00 +.003 -.000 recommended panel cutout h = 11/16 across flats, 20.32 [.800] across points. 12.83 [.505 ] +0.13 -0.00 +.005 -.000 dia. dia. 5.54 [.218 ] +0.06 -0.00 +.003 -.000 jack-jack adapters style a body center contact dielectric style part no. plating plating nickel silver teflon a 221551-1 nickel gold teflon a 221551-3 nickel gold polymethyl- b 5414414-1 pentene style b plug-plug adapter 31.8 [1.252] ref. contact body part no. plating plating gold nickel 415796-1 note: pa rt numbers are rohs compliant except: indicates non-rohs compliant. teflon is a trademark of e.i. dupont de nemours and company.
65 catalog 1307191 dimensions are in millimeters dimensions are shown for usa: 1-800-522-6752 south america: 55-11-2103-6000 revised 3-07 and inches unless otherwise reference purposes only. canada: 1-905-470-4425 hong kong: 852-2735-1628 specified. values in brackets specifications subject mexico: 01-800-733-8926 japan: 81-44-844-8013 www.tycoelectronics.com are standard equivalents. to change. c. america: 52-55-1106-0803 uk: 44-8706-080-208 rf coax connectors bnc connectors, 50 ohm (continued) jack covers 101.6 [4.000] #6 stud size 22.10 [.870] 14.53 dia. [.572] max. body plating part no. silver 330022 nickel 1-330022-2 max. 14.53 dia. [.572] max. 33.02 [1.300] #6 stud size t ether te rminator plugs 50, 75, 93 ohm plating body nickel center contact gold dielectric polyethylene insulated te rminators insulation material polyphenylene oxide long cover short cover* 38.10 [1.500] 17.40 [.685] 17.40 [.685] register color cover part specification style no. gray long 5413557-1 1 watt, 50 ohm short 5413364-2 black long 5413557-2 * the short cover is required when mating the terminator with a tee adapter. resistor part no. specification with tether without tether 1 watt, 50 ohm 5221629-1 1 5221629-4 1 watt, 75 ohm 5221629-2 1 5221629-5 1 watt, 93 ohm 5221629-6 0.5 watt, 75 ohm 1 watt, 50 ohm 1-5221629-6 1 1 t ether is conductive with #4 stud size max. 38.10 [1.500] max. shorting caps plating body nickel center contact gold pa rt no. 413453-1 15.24 [.600] 14.53 [.572] dia. max. note: pa rt numbers are rohs compliant except: indicates non-rohs compliant.
66 catalog 1307191 dimensions are in millimeters dimensions are shown for usa: 1-800-522-6752 south america: 55-11-2103-6000 revised 3-07 and inches unless otherwise reference purposes only. canada: 1-905-470-4425 hong kong: 852-2735-1628 specified. values in brackets specifications subject mexico: 01-800-733-8926 japan: 81-44-844-8013 www.tycoelectronics.com are standard equivalents. to change. c. america: 52-55-1106-0803 uk: 44-8706-080-208 rf coax connectors bnc connectors, 75 ohm plugs, crimp these connectors have been designed for optimum performance and have a true 75 ohm impedance the complete length of the connector. the crimp die tooling listed below is different from the equivalent 50 ohm connectors. plugs interchangeable dies for interchangeable rg/u termination center body dim. pro-crimper dies for hand contact dielectric style hand tool tool 69710-1 part no. cable type plating plating l 354940-1 or & 626 pneu. pro-crimper head 318161-1 adapter 679304-1 179, 179a, hex crimp gold nickel polyethelene commercial 29.46 58425-2 5413589-8 179b, 187, 1.160 187a, 161, o crimp gold nickel polyethelene commercial 35.56 318451-2 5221185-8 belden 9221 1.140 hex crimp gold nickel polyethelene commercial 29.46 58425-2 1-5413589-0 a t&t 735a 1.160 o crimp gold nickel polyethelene commercial 27.69 58174-1 58248-3 1-5221185-8 1.090 hex crimp gold nickel polyethelene commercial 29.46 58425-2 5413589-3 belden 8218 1.160 o crimp gold nickel polyethelene commercial 27.69 58174-1 58248-3 5221185-3 1.090 140, 210, 62, 62a, hex crimp gold nickel polyethelene commercial 29.46 58425-1 5413589-2 62b, 59, 59a, 59b, 1.160 belden 9291, o crimp gold nickel polyethelene commercial 27.69 58536-1 58248-2 5221185-2 9209, 9269 1.090 302, belden 89269, 88241, hi-temp 62a, hex crimp gold nickel polyethelene commercial 29.46 58425-1 5413589-1 t imes pl-62, berk tek 1.160 btdc-59, btdc-62 belden 8212, 9104, 29.46 9112, 9167, 9240, 9259, hex crimp gold nickel polyethelene commercial 1.160 58425-1 5413589-9 9266, times fm-59, (rg 59 type 27.69 with 20 awg c.c.) o crimp gold nickel polyethelene commercial 1.090 58536-1 58248-2 5221185-9 hex crimp gold nickel polyethelene commercial 29.46 58425-1 5413589-7 belden 9145, 1.160 a t&t 734a o crimp gold nickel polyethelene commercial 27.69 58536-1 1-5221185-0 1.090 belden 9248, o crimp gold nickel polyethelene commercial 25.65 58536-1 5221185-1 9114 1.010 6, 6a o crimp gold nickel polyethelene commercial 37.85 58538-1 58248-1 5221185-7 1.490 belden 8281, hex crimp gold nickel polyethelene commercial 29.46 58425-3 5413589-5 9141, 9231, 1.160 w estern electric 724, o crimp gold nickel polyethelene commercial 28.45 58538-1 58248-1 5221185-5 728, 3049 1.120 comm/scope o crimp gold nickel polyethelene commercial 28.96 58536-1 2-5221185-9 s59 hec 1.140 comm/scope o crimp gold nickel polyethelene commercial 28.96 58536-1 3-5221185-1 f59 hec-z 1.140 l max. 14.53 [.572] dia. max. hex and o crimp note: pa rt numbers are rohs compliant except: indicates non-rohs compliant. a t&t is a trademark of at&t corporation. belden is a trademark of belden wire and cable company. comm/scope is a trademark of commscope, inc.
67 catalog 1307191 dimensions are in millimeters dimensions are shown for usa: 1-800-522-6752 south america: 55-11-2103-6000 revised 3-07 and inches unless otherwise reference purposes only. canada: 1-905-470-4425 hong kong: 852-2735-1628 specified. values in brackets specifications subject mexico: 01-800-733-8926 japan: 81-44-844-8013 www.tycoelectronics.com are standard equivalents. to change. c. america: 52-55-1106-0803 uk: 44-8706-080-208 rf coax connectors bnc connectors, 75 ohm (continued) plugs for jis cables, crimp plating body nickel center contact gold bulkhead jacks for jis cables, crimp plating body nickel center contact gold dielectric polymethylpentene 14.53 [.572] dia. max. l max. interchangeable dies f or pro-crimper t ermination dim. hand tool 354940-1 part no. jis cable t ype dielectric lor pro-crimper adapter 679304-1 3c-2v hex crimp polymethylpentene 29.46 58425-1 1-5413589-1 1.160 2.5c-2v hex crimp polymethylpentene 29.46 58425-2 1-5413589-6 1.160 interchangeable dies f or pro-crimper t ermination dim. hand tool 354940-1 part no. jis cable t ype dielectric lor pro-crimper adapter 679304-1 1.5c-2v hex crimp 75 ? 36.83 58425-2 5413590-4* 1.450 *packaged in 100 pieces per bag. 20.32 [.800] max. l max. note: pa rt numbers are rohs compliant except: indicates non-rohs compliant.
68 catalog 1307191 dimensions are in millimeters dimensions are shown for usa: 1-800-522-6752 south america: 55-11-2103-6000 revised 3-07 and inches unless otherwise reference purposes only. canada: 1-905-470-4425 hong kong: 852-2735-1628 specified. values in brackets specifications subject mexico: 01-800-733-8926 japan: 81-44-844-8013 www.tycoelectronics.com are standard equivalents. to change. c. america: 52-55-1106-0803 uk: 44-8706-080-208 rf coax connectors bnc connectors, 75 ohm (continued) 14.53 dia. [.572] max. l max. 27.18 [1.070] hex and o crimp max. interchangeable dies for interchangeable rg/u termination center body dim. pro-crimper dies for hand contact dielectric style hand tool tool 69710-1 part no. cable type plating plating l 354940-1 or & 626 pneu. pro-crimper head 318161-1 adapter 679304-1 179, 179a, 179b, 187, hex crimp gold nickel polymethyl- commercial 39.45 58425-2 - 5413588-8 187a, 161 pentene 1.553 belden 9221 a t&t 735a hex crimp gold nickel polymethyl- commercial 39.45 58425-2 1-5413588-0 pentene 1.553 a t&t ks 19224 l2, hex crimp gold nickel polymethyl- commercial 39.45 58425-2 5413588-4 rd179 pentene 1.553 double braid 140, 210, 62, hex crimp gold nickel polymethyl- commercial 1 39.45 58425-1 5413588-2 62a, 62b, 59, pentene 1.553 59a, 59b, belden 9291, o crimp gold nickel polymethyl- commercial 39.88 58536-1 58248-2 - 5221402-2 9209, 9269 pentene 1.570 belden 8212, 9104, 9112, 9240, 9167, 9259, 9266, hex crimp gold nickel polymethyl- commercial 39.45 58425-1 5413588-9 t imes fm-59, pentene 1.553 (rg 59 type with 20 a wg c.c.) belden 9145, o crimp gold nickel polymethyl- commercial 39.88 58536-1 5221402-4 a t&t 734a pentene 1.570 right-angle plugs, crimp note: pa rt numbers are rohs compliant except: indicates non-rohs compliant. a t&t is a trademark of at&t corporation. belden is a trademark of belden wire and cable company.
69 catalog 1307191 dimensions are in millimeters dimensions are shown for usa: 1-800-522-6752 south america: 55-11-2103-6000 revised 3-07 and inches unless otherwise reference purposes only. canada: 1-905-470-4425 hong kong: 852-2735-1628 specified. values in brackets specifications subject mexico: 01-800-733-8926 japan: 81-44-844-8013 www.tycoelectronics.com are standard equivalents. to change. c. america: 52-55-1106-0803 uk: 44-8706-080-208 rf coax connectors bnc connectors, 75 ohm (continued) interchangeable dies for interchangeable rg/u termination center body dim. pro-crimper dies for hand contact dielectric style hand tool tool 69710-1 part no. cable type plating plating l 354940-1 or & 626 pneu. pro-crimper head 318161-1 adapter 679304-1 179, 179a, hex crimp gold nickel polyethelene commercial 33.02 58425-2 5413760-8 179b, 161, 1.300 187, 187a, o crimp gold nickel polyethelene commercial 30.48 318451-2 5221199-5 belden 9221 1.200 belden 8218 hex crimp gold nickel polyethelene commercial 33.02 58425-2 5413760-3 1.300 140, 210, 62, 62a, 62b, 59, 59a, 59b, o crimp gold nickel polyethelene commercial 30.48 58536-1 58248-2 5221199-2 belden 9291, 1.200 9209, 9269 302, belden 88241, 89269, hi-temp 62a, times hex crimp gold nickel polyethelene commercial 33.02 58425-1 5413760-1 pl-62, berk 1.300 t ek btdc-59, btdc-62 belden 8212, 9104, 9112, 9240, 9167, 9259, 9266, hex crimp gold nickel polyethelene commercial 33.02 58425-1 5413760-9 t imes fm-59, 1.300 (rg 59 type with 20 a wg c.c.) belden 9248, o crimp gold nickel polyethelene commercial 30.48 58536-1 5221199-1 9114 1.200 jacks, crimp l max. hex and o crimp 11.08 dia. [.436] max. note: pa rt numbers are rohs compliant except: indicates non-rohs compliant. belden is a trademark of belden wire and cable company.
70 catalog 1307191 dimensions are in millimeters dimensions are shown for usa: 1-800-522-6752 south america: 55-11-2103-6000 revised 3-07 and inches unless otherwise reference purposes only. canada: 1-905-470-4425 hong kong: 852-2735-1628 specified. values in brackets specifications subject mexico: 01-800-733-8926 japan: 81-44-844-8013 www.tycoelectronics.com are standard equivalents. to change. c. america: 52-55-1106-0803 uk: 44-8706-080-208 rf coax connectors bnc connectors, 75 ohm (continued) 20.32 [.800] max. 34.93 [1.375] hex and o crimp max. 12.83 [.505 ] +0.13 -0.20 +.005 -.000 dia. 5.54 [.218 ] +0.08 -0.00 +.003 -.000 maximum panel thickness 6.1 [.240] recommended panel cutout interchangeable dies for interchangeable rg/u termination center body dim. pro-crimper dies for hand contact dielectric style hand tool tool 69710-1 part no. cable type plating plating l 354940-1 or & 626 pneu. pro-crimper head 318161-1 adapter 679304-1 179, 179a, hex crimp gold nickel polyethelene commercial 36.83 58425-2 5413590-8 179b, 161, 1.450 187, 187a, o crimp gold nickel polyethelene commercial 34.93 318451-2 5221221-5 belden 9221 1.375 a t&t ks 19224 l2, hex crimp gold nickel polyethelene commercial 36.83 58425-2 5413590-4 rd179 1.450 double braid hex crimp gold nickel polyethelene commercial 36.83 58425-2 5413590-3 belden 8218 1.450 140, 210, 62, 62a, 62b, 59, 59a, 59b, o crimp gold nickel polyethelene commercial 34.93 58536-1 58248-2 5221221-2 belden 9291, 1.375 9209, 9269 belden 8212, 9104, 9112, 9240, 9167, 9259, 9266, o crimp gold nickel polyethelene commercial 34.93 58536-1 58248-2 5221221-7 t imes fm-59 1.375 (rg 59 type with 20 awg c.c.) belden 9114, o crimp gold nickel polyethelene commercial 34.93 58536-1 5221221-1 9248 1.375 bulkhead jacks, crimp note: pa rt numbers are rohs compliant except: indicates non-rohs compliant. a t&t is a trademark of at&t corporation. belden is a trademark of belden wire and cable company.
71 catalog 1307191 dimensions are in millimeters dimensions are shown for usa: 1-800-522-6752 south america: 55-11-2103-6000 revised 3-07 and inches unless otherwise reference purposes only. canada: 1-905-470-4425 hong kong: 852-2735-1628 specified. values in brackets specifications subject mexico: 01-800-733-8926 japan: 81-44-844-8013 www.tycoelectronics.com are standard equivalents. to change. c. america: 52-55-1106-0803 uk: 44-8706-080-208 rf coax connectors bnc connectors, 75 ohm (continued) bulkhead solder jacks front mount plating body nickel center contact silver 27.43 [1 .083] 13.09 dia. [.515] max. maximum panel thickness 3.18 [.125] recommended panel cutout 9.75/9.65 [.384./380] dia. 4.04/3.96 [.159/.156] pa rt no. 5221244-1 (with solder terminal) bulkhead solder jack rear mount lockwasher and jam nut see page 73. plating body nickel center contact gold dielectric polymethylpentene bulkhead jack pc board mount accepts .054 dia. max. wire pa rt no. 5415187-1 (without solder terminal) 3/8-32 thread pa rt no. 5414217-1 17.78 dia. [.700] max. 31.75 [1 .250] 1/2-28 thread accepts . .050 dia. max. wire max. max. 12.83 [.505 ] +0.13 -0.00 +.005 -.000 dia. 5.54 [.218 ] +0.08 -0.00 +.003 -.000 maximum panel thickness 6.35 [.250] recommended panel cutout 13.09 [.515] dia. max. 27.43 [1.083] max. accepts .054 dia. max. wire 3/8-32 thread 20.8 [.820] 11.07 [.436] max. 3.30 [.130] 12.70 0.1 [.500 .004 ] 11.2 0.1 [.441 .004 ] pa rt no. 6274086-1 note: if insulating bushing required use part no. 227223-1 or 221951-1 (for details, reference page 55). note: if insulating bushing required use part no. 227223-1 or 221951-1 (for details, reference page 55). note: pa rt numbers are rohs compliant except: indicates non-rohs compliant.
72 catalog 1307191 dimensions are in millimeters dimensions are shown for usa: 1-800-522-6752 south america: 55-11-2103-6000 revised 3-07 and inches unless otherwise reference purposes only. canada: 1-905-470-4425 hong kong: 852-2735-1628 specified. values in brackets specifications subject mexico: 01-800-733-8926 japan: 81-44-844-8013 www.tycoelectronics.com are standard equivalents. to change. c. america: 52-55-1106-0803 uk: 44-8706-080-208 rf coax connectors bnc connectors, 75 ohm (continued) body center dimensions part no. contact without with material plating abcl mounting posts mounting posts v alox, black w/ 6.17 21.21 11.68 2.79 * compliant posts gold3 .243 .835 .460 .110 5415105-2 (economy)* v alox, 6.17 21.21 11.68 4.01 * black gold3 .243 .835 .460 .158 5415105-1 (economy)* v alox, gold1 6.91 21.21 13.88 3.48 5413194-1 white .272 .835 .519 .137 v alox, 6.91 21.21 13.88 3.48 * white gold1 .272 .835 .519 .137 5415634-2 (economy)* v alox, gold1 6.91 21.21 13.88 3.48 5413194-2 black .272 .835 .519 .137 gold1 6.91 21.21 13.88 3.48 5415634-1 v alox, .272 .835 .519 .137 black gold1 8.59 21.21 15.88 3.48 5415633-1 (economy)* .338 .835 .625 .137 v alox, gold2 8.59 21.21 15.88 3.48 5414459-1 white .338 .835 .625 .137 metal gold1 8.25 20.83 15.88 2.16 5222092-1 .325 .820 .625 .085 metal gold1 8.25 20.83 15.88 5222093-1 .325 .820 .625 metal gold1 8.25 20.83 15.88 3.48 5414409-1 (economy)* .325 .820 .625 .137 metal with gold1 6.91 20.83 12.70 3.48 5415417-1 compliant .272 .820 .500 .137 posts tin 8.56 21.21 15.88 3.48 5415419-1 (economy)* .337 .835 .625 .137 metal gold1 8.25 20.83 15.88 3.48 5222092-3 .325 .820 .625 .137 metal gold1 6.91 20.83 12.70 3.48 5414907-1 .272 .820 .500 .137 metal gold1 6.91 20.83 12.70 6274072-1 .272 .820 .500 metal gold1 6.91 20.83 12.70 3.48 6274084-1 (economy)* .272 .820 .500 .137 * * economy connector uses 50 ? part with smaller dielectric and stamped and formed con- tact, phosphor bronze contact material (compare to regular connector which is 75 ? , screw machined beryllium copper). plating: gold1 0.00076 [.000030] thick gold2 0.00127 [.000050] thick note: if an insulating bushing is required see part number 330620 and panel cutout on page 54. c l c l recommended pc board layouts right-angle jacks pc board/panel mount outer shell nickel dielectric polymethylpentene lockwasher and jam nut see page 73. a b 34.93 [1.375] c mtg. hgt. 1/2-28 threads 1/2-28 threads v alox body a b 34.93 [1.375] metal body c mtg. hgt. l * screw for panel thickness of 2.38 [3/32] or greater * pa rt no. 221108-2. * screw for panel thickness of less than 2.38 [ 3/32 ] * pa rt no. 221108-4. without mounting posts with mounting posts (top view) 10.16 ?.08 [.400 ?003 ] 5.08 ?.05 [.200 ?002 ] 2.54 ?.05 [.100 ?002 ] gs 0.89 ?.08 [.035 ?003 ] 2.64 [.104] dia. clearance hole for 2-56 self-tapping screw* (2 holes) 5.08 ?.05 [.200 ?002 ] 2.01 ?.08 [.079 ?003 ] (2 holes) mating f ace (top view) 10.16 ?.08 [.400 ?003 ] 5.08 ?.05 [.200 ?002 ] 2.54 ?.05 [.100 ?002 ] gs 0.89 ?.08 [.035 ?003 ] 5.08 ?.05 [.200 ?002 ] mating f ace 12.83 [.505 ] +0.13 -0.00 +.005 -.000 dia. 5.54 [.218 ] +0.13 -0.00 +.005 -.000 maximum panel thickness 6.1 [.240] recommended panel cutout note: pa rt numbers are rohs compliant except: indicates non-rohs compliant. v alox is a trademark of general electric company.
73 catalog 1307191 dimensions are in millimeters dimensions are shown for usa: 1-800-522-6752 south america: 55-11-2103-6000 revised 3-07 and inches unless otherwise reference purposes only. canada: 1-905-470-4425 hong kong: 852-2735-1628 specified. values in brackets specifications subject mexico: 01-800-733-8926 japan: 81-44-844-8013 www.tycoelectronics.com are standard equivalents. to change. c. america: 52-55-1106-0803 uk: 44-8706-080-208 rf coax connectors bnc connectors, 75 ohm (continued) ve rtical jacks pc board/panel mount plating outer shell nickel dielectric polymethylpentene v alox body metal body recommended pc board layout l b 34.93 [1.375] mtg. hgt. 15.88 [.625] 1/2-28 thread l b 34.93 [1.375] mtg. hgt. 15.88 [.625] 1/2-28 thread body contact dim. dim. part no. material plating b l v alox, black gold1 21.21 3.48 5415632-1 (economy)* .835 .137 v alox, white gold1 21.21 3.48 5415632-2 (economy)* .835 .137 metal gold1 20.83 3.48 5222132-1 .820 .137 metal tin 21.21 3.48 5415520-1 (economy)* .835 .137 * economy connector uses 50 ? part with smaller dielectric and stamped and fo r med contact, phosphor bronze contact material (compare to regular connector which is 75 ? , screw machined beryllium copper). plating: gold1 0.00076 [.000030] thick note: if an insulating bushing is required see part number 330620 and p anel cutout on page 54. lockwasher and jam nut part no. 1-329632-2 part no. 1-329631-2 12.83 [.505 ] +0.13 -0.00 +.005 -.000 dia. 5.54 [.218 ] +0.13 -0.00 +.005 -.000 5.08 ?.05 [.200 ?002 ] 5.08 ?.05 [.200 ?002 ] 2.54 ?.05 [.100 ?002 ] 0.89 ?.08 [.035 ?003 ] 2.01 ?.08 [.079 ?003 ] (2 holes) gs (top view) 10.16 ?.08 [.400 ?003 ] 10.16 ?.08 [.400 ?003 ] maximum panel thickness 6.1 [.240] recommended panel cutout * screw for panel thickness of 2.38 [3/32] or greater * pa rt no. 221108-2. * screw for panel thickness of less than 2.38 [ 3/32 ] * pa rt no. 221108-4. note: pa rt numbers are rohs compliant except: indicates non-rohs compliant. v alox is a trademark of general electric company.
74 catalog 1307191 dimensions are in millimeters dimensions are shown for usa: 1-800-522-6752 south america: 55-11-2103-6000 revised 3-07 and inches unless otherwise reference purposes only. canada: 1-905-470-4425 hong kong: 852-2735-1628 specified. values in brackets specifications subject mexico: 01-800-733-8926 japan: 81-44-844-8013 www.tycoelectronics.com are standard equivalents. to change. c. america: 52-55-1106-0803 uk: 44-8706-080-208 rf coax connectors bnc connectors, 75 ohm (continued) ve rtical metalized jacks pc board mount plating dielectric ?teflon a max. 11.49 [.470] dia. max. recommended pc board layout style a style b style c body center leg contact style length part no. plating plating l nickel gold b 3.30 6274291-2 .130 tin gold b 3.30 6274291-1 .130 tin gold b 6.35 6274359-1 .250 tin gold c 4.44 5414394-1 .175 nickel silver a 6.35 5413986-1 .250 tin gold f 2.54 6274360-1 .100 6.88 ?.05 [.271 ?002 ] 6.88 ?.1 [.271 +.003 ] ?004 1.5 ?.1 [.059 +.004 ] ?003 3.43 ?.05 [.135 ?002 ] recommended pc board layout 17.45 [.687] 15.88 [.625] l l press fit ve rtical metalized jacks pc board mount dim. part a no. 20.57 5222462-1 .810 16.26 5414088-1 .640 20.57 [.810] l drill holes for 0.94 ?.05 [.037 ? 002 ] dia. pin (5 places) 6.35 ?.05 [.250 ?002 ] 12.7 ?.08 [.500 ?003 ] 6.35 ?.05 [.250 ?002 ] 12.7 ?.08 [.500 ?003 ] 6.88 ?.05 [.271 ?003 ] 6.88 ?.08 [.271 ?003 ] 3.43 ?.05 [.135 ?002 ] 3.44 ?.08 [.135 ?003 ] 3.43 ?.08 [.135 ?003 ] 6.88 ?.05 [.271 ?003 ] 6.88 ?.08 [.271 ?003 ] 2.44 ?.08 [.096 ?003 ] (4 holes) dia. 1.32 ?.08 [.052 ?003 ] dia. (4 plated-thru holes) dia. 1.02 ?.08 [.040 ?003 ] (plated-thru hole) dia. insulating bushing material nylon part no. 222163-1 only to be used on part nos. 5222462-1 and 5222006-1 16.64 [.655] sq. 1.50 ?.08 [.059 ?003 ] (4 holes) dia. 1.02 ?.08 [.040 ?003 ] dia. 2.96 [.115] max. 6.61 [.260] max. 14.61 [.575] dia. 11.94 [.470] dia. 1.02 0.08 [.040 .003 ] 5.16 0.08 [.203 .003 ] 5.16 0.08 [.203 .003 ] 2.578 0.076 [.1015 .0030 ] dia. 2.06 0.05 [.081 .002 ] dia. 4 plcs. 2.54 [.100] 14.73 [.580] 5 plcs. style f (push-on) note: pa rt numbers are rohs compliant except: indicates non-rohs compliant. teflon is a trademark of e.i. dupont de nemours and company.
3.81 0.08 [.150 .003 ] 1.19 0.18 [.047 .007 ] 1.78 0.08 [.070 .003 ] 7.62 0.08 [.300 .003 ] 7.62 0.08 [.300 .003 ] dia. dia. 25.40 0.38 [1.000 .015 ] 11.43 0.43 [.450 .017 ] 21.84 [.860] 17.78 [.700] 11.07 [.436] max. pa rt no. 6274127-1 75 catalog 1307191 dimensions are in millimeters dimensions are shown for usa: 1-800-522-6752 south america: 55-11-2103-6000 revised 3-07 and inches unless otherwise reference purposes only. canada: 1-905-470-4425 hong kong: 852-2735-1628 specified. values in brackets specifications subject mexico: 01-800-733-8926 japan: 81-44-844-8013 www.tycoelectronics.com are standard equivalents. to change. c. america: 52-55-1106-0803 uk: 44-8706-080-208 rf coax connectors bnc connectors, 75 ohm (continued) recommended pc board layout 6.6 0.08 [.260 .003 ] 6.6 0.08 [.260 .003 ] 3.3 0.08 [.130 .003 ] 1.17 0.08 [.046 .003 ] 2.11 0.08 [.083 .003 ] dia. (4 holes) maximum pc board thickness 2.54 [.100] dia. press fit, bulkhead ve rtical metalized jack includes hardware 28.78 [1.133] 4.37 0.51 [.172 .020 ] 5 plcs. 24.41 [.961] 10.80 [.425] + 0.08 ?0.00 + .003 ] ?.000 5.54 [.218 + 0.13 ?0.00 + .005 ] ?.000 ?12.83 [?.505 pa rt no. 6274124-2 recommended pc board layout c l 6.15 [.242] 10.97 [.432] mounting height 28.4 [1.118] max. 17.48 [.688] sq. 15.88 [.625] max. 1.7 ?.05 [.067 ?002 ] (2 places) f or drive screw 6.35 ?.05 [.250 ?002 ] 6.35 ?.05 [.250 ?002 ] 12.7 ?.05 [.500 ?002 ] 12.7 ?.05 [.500 ?002 ] 1.02 ?.08 [.040 ?003 ] (plated-thru hole 3 places) press fit ve rtical metalized jacks pc board mount (continued) pc board thickness (min.) part no. 2.36 5221336-3 .093 3.17 5221336-4 .125 recommended pc board layout body contact center part no. plating dielectric plating contact dimension nickel tpx gold2 .171 [.007] 5413558-1 tin teflon gold2 .171 [.007] 5413558-2 nickel tpx gold2 .131 [.005] 5413558-3 nickel tpx gold1 .171 [.007] 5413558-5 gold1 0.00076 [.000030] thick gold2 0.00127 [.000050] thick dia. right-angle metalized jacks pc board mount 1.02 0.08 [.040 .003 ] 3.43 [.135] 6.88 [.271] 3.43 [.135] 6.88 [.271] holes plated through 5 plcs. note: pa rt numbers are rohs compliant except: indicates non-rohs compliant. teflon is a trademark of e.i. dupont de nemours and company. tpx is a trademark of mitsui chemicals america, inc.
76 catalog 1307191 dimensions are in millimeters dimensions are shown for usa: 1-800-522-6752 south america: 55-11-2103-6000 revised 3-07 and inches unless otherwise reference purposes only. canada: 1-905-470-4425 hong kong: 852-2735-1628 specified. values in brackets specifications subject mexico: 01-800-733-8926 japan: 81-44-844-8013 www.tycoelectronics.com are standard equivalents. to change. c. america: 52-55-1106-0803 uk: 44-8706-080-208 rf coax connectors 36.07 [1.420] max. 15.88 0.25 [.625 .010 ] bnc connectors, 75 ohm (continued) right-angle metalized jacks pc board/panel mount maximum panel thickness 6.35 [.250] recommended panel cutout 12.83 +0.13 -0.00 [.505 +.005 ] -.000 dia. 5.64 +0.08 -0.00 [.222 +.003 ] -.000 12.83 +0.13 -0.00 [.505 +.005 ] -.000 dia. 5.54 +0.08 -0.00 [.218 +.003 ] -.000 pa rt no. 5222117-1 36.07 [1.420] 11/16 right-angle adapter (jack-plug) plating body nickel center contact gold dielectric polymethylpentene 22.89 [.901] max. 14.53 [.572] 26.97 [1.062] pa rt no. 5415020-1 maximum panel thickness 6.35 [.250] recommended panel cutout 12.83 +0.13 -0.00 [.505 +.005 ] -.000 dia. 5.54 +0.08 -0.00 [.218 +.003 ] -.000 recommended p anel cutout dia. max. bulkhead jack-jack adapter plating body nickel center contact gold dielectric polymethylpentene pa rt no. 1274935-1 jack-jack adapter plating body ?nickel center contact ?gold dielectric ?polymethylpentene bulkhead jack-jack adapter plating body ?nickel center contact ?gold dielectric ?polymethylpentene body plating dielectric part no. tin teflon 6274425-2 1/2-28 thread 27.64 0.51 [1.088 .020 ] 10.97 0.18 [.432 .007 ] 6.15 0.25 [.242 .010 ] 11.66 [.459] 4.34 [.171] 36.04 [1.419] max. pa rt no. 415567-1 note: pa rt numbers are rohs compliant except: indicates non-rohs compliant. teflon is a trademark of e.i. dupont de nemours and company.
77 catalog 1307191 dimensions are in millimeters dimensions are shown for usa: 1-800-522-6752 south america: 55-11-2103-6000 revised 3-07 and inches unless otherwise reference purposes only. canada: 1-905-470-4425 hong kong: 852-2735-1628 specified. values in brackets specifications subject mexico: 01-800-733-8926 japan: 81-44-844-8013 www.tycoelectronics.com are standard equivalents. to change. c. america: 52-55-1106-0803 uk: 44-8706-080-208 rf coax connectors bnc connectors, 75 ohm (continued) 8.89 0.13 [.350 .005 ] + 0.13 ?0.00 + .005 ?.000 9.65 [.380 ] recommended panel cutout bulkhead jack-push on plug adapter 41.92 [1.650] 14.35 [.565] max. 8.43 [.332] max. pa rt no. 1274007-1 note: pa rt numbers are rohs compliant except: indicates non-rohs compliant.
78 catalog 1307191 dimensions are in millimeters dimensions are shown for usa: 1-800-522-6752 south america: 55-11-2103-6000 revised 3-07 and inches unless otherwise reference purposes only. canada: 1-905-470-4425 hong kong: 852-2735-1628 specified. values in brackets specifications subject mexico: 01-800-733-8926 japan: 81-44-844-8013 www.tycoelectronics.com are standard equivalents. to change. c. america: 52-55-1106-0803 uk: 44-8706-080-208 rf coax connectors mini bnc connectors, 75 ohm product facts bayonet locking coupling mechanism 40% more interconnects in the same area compatible with trompeter tooling ideal for telecommunica- tions and broadband applications t yco electronics introduces the mini bnc series of rf connectors to meet the growing demand for next generation telecommunica- tions and broadband applications where higher connector densities are needed. preserving the characteristics that have made the standard bnc so popular, the mini bnc offers the same high per- formance currently found in standard tyco electronics bnc series, but offers 40% more interconnects in the same area. the mini bnc offering is an excellent fit for 75 ohm systems, offering 500 mat- ing cycles, electrical per- formance through 2 ghz, and is completely inter- mateable with competitive miniature bnc offerings. t yco electronics?mini bnc product offers the same advantage of the bayonet locking mechanism as our standard bnc, allowing quicker connect and dis- connects than standard threaded interfaces. it uses standard bnc installation tooling meaning there is no need for retraining of field telco installers, and it uti- lizes the same pcb footprint on the jack side, providing a drop in replacement for ds3 telco applications. mini bnc connector config- urations currently available include pcb, panel mount, and flexible cable. other options can be reviewed as well, including additional cable sizes, adapters, pcb surface mounting, and tape and reel packaging. call your local sales office or authorized distributor for additional information or samples of the mini bnc connector series. t yco electronics is a leading supplier of rf and microwave connectors and cable assemblies, and pro- vides advanced technology products from well known and industry leading brands, including amp and m/a-com. material and finish shells, bodies, mtg nuts ?brass, nickel plated w ashers ?stainless steel, nickel plated ferrule ?copper or brass, tin plated center contacts ?phos bronze and brass, gold plated dielectrics ?ptfe electrical characteristics frequency ?dc ?2 ghz nominal impedance ?75 ohms v oltage rating ?300 volts (vrms maximum) @ sea level vswr ? 1.10 max to 500 mhz (return loss -26.4 db) 1.16 max to 1 ghz (return loss -22.6 db) insulation resistance ? 1,000 megohms minimum dielectric withstanding voltage 1,000 volts (vrms maximum) @ sea level contact resistance ? 12 milliohms maximum mechanical characteristics connector durability ? 500 mating cycles force to engage ? 7 pounds maximum force to disengage ? 1 pound minimum center contact retention ? 2 pounds minimum cable retention ? 20 pounds minimum vibration ?eia-364-28, t est condition vii, condition d shock ?eia-364-27, method h environmental characteristics t emperature rating ? ?0 to +85? moisture resistance ?eia-364-31, method ii, condition c thermal shock ?eia-364-32 note: p erformance specifications are typical, but may not apply to all connector types. related product data product specification ?108-2159 sample kit ?1773042 bnc mini bnc 32.89 [1.29] ref. 27.52 [1.08] ref. trompeter is a trademark of t rompeter electronics, inc.
79 catalog 1307191 dimensions are in millimeters dimensions are shown for usa: 1-800-522-6752 south america: 55-11-2103-6000 revised 3-07 and inches unless otherwise reference purposes only. canada: 1-905-470-4425 hong kong: 852-2735-1628 specified. values in brackets specifications subject mexico: 01-800-733-8926 japan: 81-44-844-8013 www.tycoelectronics.com are standard equivalents. to change. c. america: 52-55-1106-0803 uk: 44-8706-080-208 rf coax connectors mini bnc connectors, 75 ohm (continued) interface dimensions mini bnc jack dimensions abcdefgh jk lm 8.89?.14 7.37?.62 7.11?.21 6.63?.73 6.20?.30 5.03?.13 4.39?.50 1.32?.42 3.86?.27 7.70 0.18?.30 4.01 .350?360 .290?300 .280?284 .261?265 .244?248 .198?202 .173?177 .052?056 .152?168 .303 min. .007?012 .158 min. mini bnc plug dimensions abcdefghj 7.70?.80 0.71?.76 11.43?1.68 4.27?.93 0.94?.35 1.57?.68 9.60?.70 2.50?.59 .303?307 .028?030 .450?460 .168?194 .037?053 .062?066 .378?382 .098?102 dimensions klmnpqrst 1.57?.68 0.64?.74 1.47?.57 0.20?.30 4.62?.93 2.84?.38 2931 1416 6.20?.30 .062?066 .025?029 .058?062 .008?012 .182?194 .112?133 .244?248 h reference plane a e k j l g f d c b m s k m l j h a b d t c n typ. q ref. reference plane r typ. g q f p e contact types
80 catalog 1307191 dimensions are in millimeters dimensions are shown for usa: 1-800-522-6752 south america: 55-11-2103-6000 revised 3-07 and inches unless otherwise reference purposes only. canada: 1-905-470-4425 hong kong: 852-2735-1628 specified. values in brackets specifications subject mexico: 01-800-733-8926 japan: 81-44-844-8013 www.tycoelectronics.com are standard equivalents. to change. c. america: 52-55-1106-0803 uk: 44-8706-080-208 rf coax connectors mini bnc connectors, 75 ohm (continued) flexible cable ?crimp attachment straight cable plug right-angle cable plug bulkhead cable jack cable part number 735a 1274563-1 734a 1274563-2 rg 179 1274563-3 cable part number 735a 1274566-1 734a 1274566-2 rg 179 1274566-3 cable part number 735a 1274568-1 734a 1274568-2 rg 179 1274568-3 27.69 [1.090] 11.56 [.455] max. 11.56 [.455] 22.73 [.895] max. 23.89 [.940] max. r 4.83 [1.90] 4.06 [.160] 7.82 [ .308 ] 3/8 - 32 unef-2a recommended panel cutout tolerance: 0.08 [.003] 0.51 [.020] 13.46 [.530] 26.92 [1.060] max. note: pa rt numbers are rohs compliant except: indicates non-rohs compliant.
81 catalog 1307191 dimensions are in millimeters dimensions are shown for usa: 1-800-522-6752 south america: 55-11-2103-6000 revised 3-07 and inches unless otherwise reference purposes only. canada: 1-905-470-4425 hong kong: 852-2735-1628 specified. values in brackets specifications subject mexico: 01-800-733-8926 japan: 81-44-844-8013 www.tycoelectronics.com are standard equivalents. to change. c. america: 52-55-1106-0803 uk: 44-8706-080-208 rf coax connectors mini bnc connectors, 75 ohm (continued) printed circuit board straight jack receptacle right-angle jack receptacle right-angle bulkhead jack receptacle 2 position, right-angle, bulkhead jack receptacle part number 1274571-1 part number 1274572-1 part number 1274584-1 description part number with hardware 1274663-2 without hardware 1274684-1 13.59 [.535] 2.54 [.100] 12.70 [.500] 9.50 [.374] 24.10 [.949] 7.65 [.301] 24.21 [.953] 1.27 [.050] ty p. 7.49 [.295] ty p. 0.51 [.020] ty p. 7.54 [.297] sq. 0.76 [.030] sq. typ. 0.97 [.038] 15.44 [.608] 3.99 [.157] t yp . 15.37 [.605] 10.62 [.418] 6.58 [.259] 3.99 [.157] 0.97 [.038] typ. 7.54 [.297] sq. 0.76 [.030] typ. sq. 22.45 [.884] 3.99 [ .157 ] 0.97 [.038] 10.92 [.430] typ. 4.69 [.185] 3.81 [.150] 3/8 - 32 unef-2a 8.53 [.336] 8.48 [.334] 0.76 [.030] sq. typ. 7.54 [.297] note: pa rt numbers are rohs compliant except: indicates non-rohs compliant. 3.94 [.155] ty p.
82 catalog 1307191 dimensions are in millimeters dimensions are shown for usa: 1-800-522-6752 south america: 55-11-2103-6000 revised 3-07 and inches unless otherwise reference purposes only. canada: 1-905-470-4425 hong kong: 852-2735-1628 specified. values in brackets specifications subject mexico: 01-800-733-8926 japan: 81-44-844-8013 www.tycoelectronics.com are standard equivalents. to change. c. america: 52-55-1106-0803 uk: 44-8706-080-208 rf coax connectors decoupled connectors product facts built-in chip capacitors filter high-frequency noise to panel ground pc board mounting with vertical and standard or low-profile right-angle configurations cable mount bulkhead bnc version available drop-in replacement for t yco electronics standard bnc printed circuit board connectors one-piece design and robotic capacity to reduce assembly time t yco electronics capaci- tively decoupled connectors provide the fast, better way to reduce noise and reduce ground loops on coaxial interconnections. the high- frequency noise generated by fast rise times can cause both false triggering of circuits as well as emissions that can be radiated or conducted outside the equipment. such emissions can interfere with nearby equipment. ground loops are also a problem for net- worked systems. ground loops are caused when two interconnected units are at different voltage potentials. the typical way to handle such emi and ground loop problems is to decouple the cable shield from the ground panel by soldering a ceramic disk capacitor between the cable shield and the panel. the capaci- tor shunts high-frequency noise to ground. while effective, this approach is time consuming and expensive. the capacitively decoupled connector has built-in chip capacitors. these capaci- tors establish the electrical contact between the outer shield and a clip. this clip provides a short electrical path between the capaci- tors and panel. as a result, high-frequency noise is effectively shunted to ground, while the dc path is blocked. the connectors offer com- patibility in design and manufacture. the same footprint and dimensional envelope make them a drop-in replacement for t yco electronics standard bnc or tnc printed circuit board connectors. in addi- tion, they can be robotically picked and placed for high- speed automated assembly to pc boards. product specification 108-1263 ?bnc decoupled pcb press-fit connection 108-1269 ?bnc decoupled pcb connectors 108-1490 ?bnc decoupled cable mount
decoupled connectors (continued) 12.83 +0.13 -0.00 [.505 +.005 ] -.000 dia. 5.54 +0.08 -0.00 [.218 +.003 ] -.000 12.83 +0.13 -0.00 [.505 +.005 ] -.000 dia. 5.54 +0.08 -0.00 [.218 +.003 ] -.000 10.16 ?.08 [.400 ?003 ] 2.54 ?.05 [.100 ?002 ] 0.89 ?.08 [.035 ?003 ] 2.01 ?.08 [.079 ?003 ] (2 holes) (top view) gs 5.08 ?.05 [.200 ?002 ] 5.08 ?.05 [.200 ?002 ] mating f ace gs (top view) 10.16 ?.08 [.400 ?003 ] 10.16 ?.08 [.400 ?003 ] 5.08 ?.05 [.200 ?002 ] 2.54 ?.05 [.100 ?002 ] 0.89 ?.08 [.035 ?003 ] 2.01 ?.08 [.079 ?003 ] (2 holes) 5.08 ?.05 [.200 ?002 ] 34.93 [1.375] 15.08 [.625] 20.96 [.825] pc board/panel mount jacks decoupled to panel material body ? alox, black dielectric polymethylpentene 34.93 [1.375] 20.96 [.825] b a c l style b right-angle bnc style a v ertical bnc recommended pc board layout note: both styles are shown with a standard clip. see next page for other clip styles. f or height dimensions see chart on page 85. maximum panel thickness 6.1 [.240] recommended panel cutout maximum panel thickness 6.1 [.240] recommended panel cutout recommended pc board layout 83 catalog 1307191 dimensions are in millimeters dimensions are shown for usa: 1-800-522-6752 south america: 55-11-2103-6000 revised 3-07 and inches unless otherwise reference purposes only. canada: 1-905-470-4425 hong kong: 852-2735-1628 specified. values in brackets specifications subject mexico: 01-800-733-8926 japan: 81-44-844-8013 www.tycoelectronics.com are standard equivalents. to change. c. america: 52-55-1106-0803 uk: 44-8706-080-208 rf coax connectors v alox is a trademark of general electric company.
84 catalog 1307191 dimensions are in millimeters dimensions are shown for usa: 1-800-522-6752 south america: 55-11-2103-6000 revised 3-07 and inches unless otherwise reference purposes only. canada: 1-905-470-4425 hong kong: 852-2735-1628 specified. values in brackets specifications subject mexico: 01-800-733-8926 japan: 81-44-844-8013 www.tycoelectronics.com are standard equivalents. to change. c. america: 52-55-1106-0803 uk: 44-8706-080-208 rf coax connectors decoupled connectors (continued) clip styles extended f or use with or without a jam nut short electrical path f or reduced series inductance in ground path shortening bar standard 20.96 [.825] 19.30 [.760] max. clip width 2.54 [.100] max. recommended p anel mount .304 [.012] 20.96 [.825] flush f or closer centerline-to-centerline connector spacing 14.76 [.581] clip width 20.96 [.825] 2.54 [.100] max. recommended p anel mount .304 [.012] 20.96 [.825]
decoupled connectors (continued) pc board/panel mount jacks decoupled to panel (continued) l l mounting post styles standard compliant capacitance/ mounting l part description v oltage clip p ost mounting b* a* style 1 no. p ost length ve r tical 9400pf standard standard 3.48 a 5413476-2 50 1500vdc .137 9400pf standard standard 4.01 15.88 8.59 b 5413524-2 standard 1500vdc .158 .625 .338 right-angle 9400pf standard compliant 2.79 15.88 8.59 b 5413524-5 50 1500vdc .110 .625 .338 standard right-angle 9400pf standard 15.88 8.59 b 5414215-1 w/o mounting post 50 2 1500vdc .625 .338 9400pf standard standard 4.01 13.18 6.91 b 5413515-2 1500vdc .158 .519 .272 20000pf standard standard 4.01 13.18 6.91 b 5413515-3 500vdc .158 .519 .272 low profile 7900pf standard compliant 2.79 13.18 6.91 b 5413515-7 right-angle 1600vdc .110 .519 .272 50 9400pf standard compliant 4.70 13.18 6.91 b 5413515-8 1500vdc .185 .519 .272 9400pf standard compliant 2.79 13.18 6.91 b 5413515-9 1500vdc .110 .519 .272 low profile right- angle w/special clip 9400pf extended compliant 2.79 13.18 6.91 b 5414284-2 & high temperature 500vdc .110 .519 .272 housing 50 low profile right-angle 9400pf flush compliant 4.70 13.18 6.91 b 5414352-1 w/high temperature 500vdc .185 .519 .272 housing 50 low profile 9400pf standard standard 4.01 13.18 ? 5414094-2 right-angle 75 1500vdc .158 .519 9400pf standard standard 4.01 6.17 11.68 5415103-1 ultra low profile 1500vdc .158 .243 .460 right-angle 9400pf standard compliant 2.79 6.17 11.68 5415103-2 75 1500vdc .110 .243 .460 1 see pages 83 and 84 for connector styles. 2 see customer drawing for pc board layout. *see page 83 for dimension reference. bnc 85 catalog 1307191 dimensions are in millimeters dimensions are shown for usa: 1-800-522-6752 south america: 55-11-2103-6000 revised 3-07 and inches unless otherwise reference purposes only. canada: 1-905-470-4425 hong kong: 852-2735-1628 specified. values in brackets specifications subject mexico: 01-800-733-8926 japan: 81-44-844-8013 www.tycoelectronics.com are standard equivalents. to change. c. america: 52-55-1106-0803 uk: 44-8706-080-208 rf coax connectors note: pa rt numbers are rohs compliant except: indicates non-rohs compliant.
86 catalog 1307191 dimensions are in millimeters dimensions are shown for usa: 1-800-522-6752 south america: 55-11-2103-6000 revised 3-07 and inches unless otherwise reference purposes only. canada: 1-905-470-4425 hong kong: 852-2735-1628 specified. values in brackets specifications subject mexico: 01-800-733-8926 japan: 81-44-844-8013 www.tycoelectronics.com are standard equivalents. to change. c. america: 52-55-1106-0803 uk: 44-8706-080-208 rf coax connectors decoupled connectors (continued) capacitance/ contact mounting l part description v oltage plating clip p ost mounting b* a* no. p ost length 50 product low profile right-angle 7900pf gold1 standard compliant 2.79 13.18 6.91 5414651-3 w/ esd protection 1500vdc .110 .519 .272 75 product standard right-angle 9400pf gold1 standard standard 4.01 15.88 8.59 5415085-1 w/ esd protection 1500vdc .158 .625 .338 low profile 9400pf 2.79 13.18 6.91 right-angle 1500vdc gold1 flush compliant .110 .519 .272 5415216-1 esd protected *see page 83 for dimension reference. right-angle bnc jack pc board/panel mount decoupled to panel esd protected see page 83 style b for panel cutout and recommended pc board configuration. esd device esd protection 1/2-28 thread note: see tyco electronics customer drawing for voltage breakdown rating. right-angle bnc jack pc board/panel mount decoupled to board esd protected recommended pc board layout recommended panel cutout pa rt no. 5415205-1 capacitance voltage 9400pf 1500vdc 10.16 0.08 [.400 .003 ] 5.08 0.05 [.200 .002 ] 2.54 0.05 [.100 .002 ] 0.89 0.08 [.035 .003 ] dia. 2 holes 2.01 0.08 [.079 .003 ] dia. 2 holes 11.13 + 0.13 - 0.00 + .005 - .000 [.438 ] 12.83 + 0.13 - 0.00 + .005 - .000 [.505 ] dia. 13.18 [.519] compliant board lock esd device note: pa rt numbers are rohs compliant except: indicates non-rohs compliant.
decoupled connectors (continued) press-fit, vertical bnc jacks, pc board mount decoupled to board material dielectric teflon isolation pad polyester plating body nickel ground clip nickel center contact gold action pin legs gold pa rt no. 5414553-1 50 ohm pa rt no. 5414493-4 75 ohm bnc bulkhead jacks, crimp 17.48 [.688] interchangeable rg/u termination center body dies for hand description contact dielectric style tool 69710-1 part no. cable type plating plating & 626 pneu. head 318161-1 50 rg 58, 58a, 58b, 58c hex crimp gold nickel polymethylpentene commercial 58436-1 5414758-1 50 rg 174, 174a, 316, 188, 188a hex crimp gold nickel polymethylpentene commercial 58436-3 5414758-2 50 rg 174, 174a, 316, 188, 188a hex crimp gold nickel polymethylpentene commercial 58436-3 5414758-3 75 esd rg 179, 187 hex crimp gold nickel polymethylpentene commercial 58425-2 5415779-1 16.51 [.650] max. over points sq. 15.88 [.625] max. 40.64 [1.600] max. recommended panel cutout 12.83 +0.13 -0.00 [.505 +.005 ] -.000 dia. 5.54 +0.08 -0.00 [.218 +.003 ] -.000 12.70 [.500] 6.35 [.250] 12.70 [.500] 6.35 [.250] 1.70 [.067] 2 plc. plated thru hole for drive screw dia. 1.02 ?.08 [.040 ?003 ] 3 plc. plated thru hole dia. ground area 9.14 [.360] dia. od 6.35 [.250] dia. id recommended pc board layout 87 catalog 1307191 dimensions are in millimeters dimensions are shown for usa: 1-800-522-6752 south america: 55-11-2103-6000 revised 3-07 and inches unless otherwise reference purposes only. canada: 1-905-470-4425 hong kong: 852-2735-1628 specified. values in brackets specifications subject mexico: 01-800-733-8926 japan: 81-44-844-8013 www.tycoelectronics.com are standard equivalents. to change. c. america: 52-55-1106-0803 uk: 44-8706-080-208 rf coax connectors note: pa rt numbers are rohs compliant except: indicates non-rohs compliant. teflon is a trademark of e.i. dupont de nemours and company.
88 catalog 1307191 dimensions are in millimeters dimensions are shown for usa: 1-800-522-6752 south america: 55-11-2103-6000 revised 3-07 and inches unless otherwise reference purposes only. canada: 1-905-470-4425 hong kong: 852-2735-1628 specified. values in brackets specifications subject mexico: 01-800-733-8926 japan: 81-44-844-8013 www.tycoelectronics.com are standard equivalents. to change. c. america: 52-55-1106-0803 uk: 44-8706-080-208 rf coax connectors self-terminating pc board connectors product facts built-in chip resistor termi- nates the signal line to the proper characteristic imped- ance when in the unmated state can be ordered with stan- dard resistance values (50, 75 and 100 ohms) fits into printed circuit board footprint of standard bnc pcb connectors one-piece design is com- patible with robotic inser- tion and wave soldering t yco electronics self- te rm inating printed circuit board bnc connectors pro- vide the capability to auto- matically terminate an input-output port to the sys- tem characteristic imped- ance. this feature eliminates the need for external terminators when an i/o port is not being used. the self-terminating bnc jack contains a chip r esistor which bridges the signal and ground paths when the connector is not mated to a bnc plug. when mated, the resistor is switched out of the circuit for direct signal transmis- sion to the board. the footprint of this connec- tor is compatible with stan- dard bnc connectors, allowing it to be easily installed into existing circuit board designs and suitable for robotic insertion for high speed automated assembly onto the pc board. the self-terminating bnc is available in standard resist- ance values for use in net- working and video systems. contact tyco electronics for new designs that include switching and capacitively decoupled versions. material body polyester, pbt, black dielectric polyester, pbt, natural plating shell ?in center contact gold on mating end and tin on solder tails 14.73 [.580] 15.86 [.625] 1/2-28unef-2a 34.96 [1.375] 20.96 [.825] product t ermination part resistance number self-terminating bnc pcb 75 ? 5414367-2 note: pa rt numbers are rohs compliant except: indicates non-rohs compliant.
t win bnc connectors product facts crimp connectors require only one-stroke crimping of both conductors, plus braid and cable support lower installed cost with one-stroke crimp reduced noise levels because of tyco electronics solderless crimping tech- niques captive inner contact stability no danger of heat damage to coaxial cable ease of inspection listed under the component program of underwriters laboratories inc., file no. e81956 pc board soldered connec- tors are recognized under the component program of underwriters laboratories inc., file no. e81956 certified by canadian standards association file no. lr 7189 r r r the twin bnc connector is a quick connect/discon- nect, weatherproof connec- tor designed in accordance with mil-c-39012 to meet the stringent requirements of mil-std-1553 multiplex data bus. these twin coaxial cable connectors are a unique development by t yco electronics which has r esulted in the production of high level rf components. te r mination of these con- nectors to twin conductor cable is made with t yco electronics exclusive one crimp method which simultaneously terminates inner conductors, outer braid and cable support with one stroke of the matching tyco electronics tool. these rugged connectors accommodate todays most commonly used twin con- ductor cable sizes. electrical characteristics nominal impedance non-constant w orking voltage 500 volts rms sea level insulation resistance 5000 megohms min. dielectric withstanding voltage 1500 volts rms sea level mechanical characteristics mating/unmating bayonet lock-quick connect/ disconnect cable attachment crimp type - simultaneous center and braid coupling nut retention 100 lbs. [444 n] min. cable retention 25 lbs. [111 n] min., rg 108a/u cable durability 200 cycles per mil-c-39012 environmental characteristics t emperature range -55? to +85? vibration mil-std-202, method 204, condition b shock mil-std-202, method 213, condition i, 100 gs salt spray mil-std-202, method 101, condition b t emperature cycling ? il-std- 202, method 102, condition c materials brass qq-b-626 beryllium copper qq-c-530 teflon ? il-p-19468 polypropylene general purpose copper, annealed qq-c-576 phosphor bronze qq-b-750 silicone rubber zz-r-765 plating silver qq-s-365 nickel qq-n-290 t in astm-b-545 packaging all connectors are pack- aged individually unless otherwise noted. 89 catalog 1307191 dimensions are in millimeters dimensions are shown for usa: 1-800-522-6752 south america: 55-11-2103-6000 revised 3-07 and inches unless otherwise reference purposes only. canada: 1-905-470-4425 hong kong: 852-2735-1628 specified. values in brackets specifications subject mexico: 01-800-733-8926 japan: 81-44-844-8013 www.tycoelectronics.com are standard equivalents. to change. c. america: 52-55-1106-0803 uk: 44-8706-080-208 rf coax connectors teflon is a trademark of e.i. dupont de nemours and company.
90 catalog 1307191 dimensions are in millimeters dimensions are shown for usa: 1-800-522-6752 south america: 55-11-2103-6000 revised 3-07 and inches unless otherwise reference purposes only. canada: 1-905-470-4425 hong kong: 852-2735-1628 specified. values in brackets specifications subject mexico: 01-800-733-8926 japan: 81-44-844-8013 www.tycoelectronics.com are standard equivalents. to change. c. america: 52-55-1106-0803 uk: 44-8706-080-208 rf coax connectors t win bnc connectors (continued) plugs bulkhead jack h = 17.45 [.687] max. across flats, 20.32 [.800] max. across points 33.74 max. [1.328] 14.61 dia. [.575] max. 38.1 max. [1.500] h 11.05 [.435 ] +0.13 -0.00 +.005 -.000 maximum panel thickness 3.18 [.125] recommended panel cutout rg/u center body integral die contact dielectric cable plating plating hand tool part no. 108, 108a silver silver teflon 69667 5332225 belden 9272, 89272 silver nickel polypropylene 69667 5332225-5 trompeter silver silver teflon 69667 5332225-3 twc-124-2 rolm 49d2401 silver nickel polypropylene 69667 5332225-6 raychem 7824d013 certi-crimp die insert for rg/u center body hand tool integral die t ools: hand cable contact plating dielectric with hand tool t ool-69710-1, part no. plating integral die 626 pneu. head 318161-1 108, 108a silver silver teflon -5 69667 69708 5332342 belden 9272, 89272 12.83 [.505 ] +0.13 -0.00 +.005 -.000 dia. note: pa rt numbers are rohs compliant except: indicates non-rohs compliant. belden is a trademark of belden wire and cable company. rolm is a trademark of the rolm corp. teflon is a trademark of e.i. dupont de nemours and company. trompeter is a trademark of t rompeter electronics, inc.
91 catalog 1307191 dimensions are in millimeters dimensions are shown for usa: 1-800-522-6752 south america: 55-11-2103-6000 revised 3-07 and inches unless otherwise reference purposes only. canada: 1-905-470-4425 hong kong: 852-2735-1628 specified. values in brackets specifications subject mexico: 01-800-733-8926 japan: 81-44-844-8013 www.tycoelectronics.com are standard equivalents. to change. c. america: 52-55-1106-0803 uk: 44-8706-080-208 rf coax connectors t win bnc connectors (continued) maximum panel thickness 6.1 [.240] recommended panel cutout 12.83 [.505 ] +0.13 -0.00 +.005 -.000 dia. 5.54 [.218 ] +0.08 -0.00 +.003 -.000 right-angle pc board/ panel mount jacks material body ? alox, white center contacts gold dielectric polymethylpentene ve rtical pc board/ panel mount jacks material body ? alox, white center contacts gold dielectric polymethylpentene with mounting posts pa rt no. 5221198-1 15.88 mtg. [.625] hgt. 36.83 max. [1.450] with mounting posts pa rt no. 5228686-1 maximum panel thickness 6.1 [.240] recommended panel cutout 2.01 ?.05 [.079 ?002 ] (2 holes) dia. 0.89 ?.08 [.035 ?003 ] (3 holes) dia. recommended pc board layout recommended pc board layout lockwasher and jam nut part no. 1-329632-2 part no. 1-329631-2 12.83 [.505 ] +0.13 -0.00 +.005 -.000 dia. 5.54 [.218 ] +0.08 -0.00 +.003 -.000 6.35 ?.08 [.250 ?003 ] 2.54 ?.08 [.100 ?003 ] 5.08 ?.08 [.200 ?003 ] 10.16 ?.08 [.400 ?003 ] 3.2 ?.08 [.126 ?003 ] 1.6 ?.05 [.063 ?002 ] 35.56 [1.400] mtg. hgt. 2.01 ?.05 [.079 ?002 ] (2 holes) dia. 0.89 ?.05 [.035 ?002 ] (3 holes) dia. 2.54 ?.08 [.100 ?003 ] 5.08 ?.08 [.200 ?003 ] 5.08 ?.08 [.200 ?003 ] 10.16 ?.08 [.400 ?003 ] 10.16 ?.08 [.400 ?003 ] 3.2 ?.13 [.126 ?005 ] 1.6 ?.05 [.063 ?002 ] note: pa rt numbers are rohs compliant except: indicates non-rohs compliant. v alox is a trademark of general electric company.
92 catalog 1307191 dimensions are in millimeters dimensions are shown for usa: 1-800-522-6752 south america: 55-11-2103-6000 revised 3-07 and inches unless otherwise reference purposes only. canada: 1-905-470-4425 hong kong: 852-2735-1628 specified. values in brackets specifications subject mexico: 01-800-733-8926 japan: 81-44-844-8013 www.tycoelectronics.com are standard equivalents. to change. c. america: 52-55-1106-0803 uk: 44-8706-080-208 rf coax connectors t win bnc connectors (continued) 12.83 [.505 ] +0.13 -0.00 +.005 -.000 dia. 5.54 [.218 ] +0.08 -0.00 +.003 -.000 h = 17.45 [.687] max. across flats, 20.32 [.800] max. across points pa rt no. 5332215 recommended panel cutout h 35.72 max. [1.406] maximum panel thickness 3.18 [.125] bulkhead jack adapter plating body silver center contacts silver dia. 5.08 0.08 [.200 .003 ] 3.48 0.08 [.137 .003 ] 1.17 0.08 [.046 .003 ] dia. 0.89 0.05 [.035 .002 ] 2 plcs. dia. 2.01 0.05 [.079 .002 ] 2 plcs. 10.16 0.08 [.400 .003 ] 10.16 0.08 [.400 .003 ] 3.20 0.13 [.126 .005 ] pa rt no. 5415832-1 recommended panel cutout ve rtical pc board mount jack plating body nickel center contacts gold dielectric polymethylpentene pcb configuration 12.83 [.505 ] +0.13 -0.00 +.005 -.000 dia. 11.05 ?.08 [.435 ?003 ] note: pa rt numbers are rohs compliant except: indicates non-rohs compliant.
93 catalog 1307191 dimensions are in millimeters dimensions are shown for usa: 1-800-522-6752 south america: 55-11-2103-6000 revised 3-07 and inches unless otherwise reference purposes only. canada: 1-905-470-4425 hong kong: 852-2735-1628 specified. values in brackets specifications subject mexico: 01-800-733-8926 japan: 81-44-844-8013 www.tycoelectronics.com are standard equivalents. to change. c. america: 52-55-1106-0803 uk: 44-8706-080-208 rf coax connectors f series and g series connectors product specification 108-1518 ?connector coaxial, f series, rf, single crimp plug 108-1643 ?connector coaxial, f series, rf, pcb mounted 108-1755 ?connector economy, f series, rf coaxial, pcb 108-1757 ?connector, 15 amp, g series jack, pcb 108-1758 ?connector, f series jack, pcb, surface mount 108-1629 ?feedthrough, sealed f port jack instruction sheets 408-9221 ?coaxial series f plug connectors 408-4402 ?series f & g coaxial cable bulkhead jack connector 408-4291 ?pro-crimper ii hand t ool assembly 58622-1 and 58622-2 t yco electronics f series connectors offer perform- ance, which is driven by evolving oem requirements and expectations. improved vswr beyond 1 ghz, high current carrying capability, and pressure sealed prod- ucts are now part of the standard product offering. designs compliant with ansi/scte, bellcore, ul/csa, and various other industry and agency stan- dards are also available. both cable applied and pcb terminated products are offered in a variety of styles. the cable connec- tors are designed for fast, accurate termination with tools common to the industry. application cost r eductions can be achieved using tyco electronics pcb terminated products; press- fit designs eliminate the need for sold ering. center of gravity control and pcb r etention designs prevent tipping and eliminate fixturing during soldering. integral mechani cal keys and ? flats?prevent r otation in panels. these products provide the highly reliable, cost-effective solutions demanded by todays evolving marketplace. product facts designs meet scte requirements where applicable plugs, jacks and adapters available board mount and cable mount available surface mount connectors available sealed product available high current carrying capabilities
94 catalog 1307191 dimensions are in millimeters dimensions are shown for usa: 1-800-522-6752 south america: 55-11-2103-6000 revised 3-07 and inches unless otherwise reference purposes only. canada: 1-905-470-4425 hong kong: 852-2735-1628 specified. values in brackets specifications subject mexico: 01-800-733-8926 japan: 81-44-844-8013 www.tycoelectronics.com are standard equivalents. to change. c. america: 52-55-1106-0803 uk: 44-8706-080-208 rf coax connectors f series connectors plugs rg/u termination body ? pro-crimper? cable type plating style threads hand tool assembly part no. 6cr imp nickel a 58425-3, 58436-2, 221539-2 or 58621-2 6 screw-on nickel b m7x1 221540-2 59 58425-3, 58436-2, belden 9104, crimp nickel c or 58621-2 414766-1 9100* 58425-3, 58436-2, 59 crimp nickel c or 58621-2 414766-8 *nid to inside cable. ? 8.23 [.324] hex crimp. crimp style a screw-on style b crimp style, hex c 21.59 [.850] max. rg/u termination center body termination part no. cable type contact plating tooling plating 179 braid: m 22520/5-01 w/ daniels 5415226-1 headend crimp tin nickel die set hx4-1637 (.128 hex) p atch panel contact: m 22520/2-01 w/ d aniels positioner k727, pos. 2 right-angle plugs, crimp rg/u termination center contact body termination cable type plating plating tooling part no. 6 crimp tin nickel use .324 inch hex 887098-1 std. cable 1.50 [.059 ] 0.30 .012 [.413 ] 10.50 0.20 .008 39.11 [1.540 ] 0.20 .008 9.40 [.370] note: pa rt numbers are rohs compliant except: indicates non-rohs compliant. belden is a trademark of belden wire and cable company. daniels is a trademark of daniels manufacturing corporation.
95 catalog 1307191 dimensions are in millimeters dimensions are shown for usa: 1-800-522-6752 south america: 55-11-2103-6000 revised 3-07 and inches unless otherwise reference purposes only. canada: 1-905-470-4425 hong kong: 852-2735-1628 specified. values in brackets specifications subject mexico: 01-800-733-8926 japan: 81-44-844-8013 www.tycoelectronics.com are standard equivalents. to change. c. america: 52-55-1106-0803 uk: 44-8706-080-208 rf coax connectors f series connectors (continued) bulkhead jacks, crimp, rear mount rg/u center contact body die set part no. cable plating plating 179 bright nickel 220210-1* 5415712-1 tin * *use with hand tool 354940-1 bulkhead jacks, crimp, splash resistant, front mount rg/u center contact body die set part no. cable plating plating 179 bright nickel 220210-1* * 5415569-2 tin * *use with hand tool 354940-1 right-angle pc board mount jacks c b a [.380 ] dia. 9.65 ?0.00 + 0.13 + .005 ?.000 8.89 [.350 ] ?0.00 + 0.13 + .005 ?.000 0.99 0.08 [.039 .003 ] 4.11 0.08 [.162 .003 ] 8.20 0.08 [.323 .003 ] 2.50 0.08 [.098 .003 ] 4 plcs. body plating center contact dimensions part barrel base plating abc no. nickel tin tin 29.97 17.53 12.19 5887078-1 1.180 .690 .480 recommended panel cutout pc board layout dia. 9.65 [.380 ] ?0.00 + 0.13 + .005 ?.000 0.99 0.08 [.039 .003 ] 4.11 0.08 [.162 .003 ] 8.20 0.08 [.323 .003 ] 2.50 0.08 [.098 .003 ] 4 plcs. recommended panel cutout pc board layout body plating center contact dimensions part barrel base plating abc no. nickel tin tin 25.40 14.48 15.90 5415302-1 1.00 .570 .626 nickel tin tin 31.75 14.48 22.25 5415302-2 1.250 .570 .876 c b a * connectors willl accept a center conductor, diameter of 0.51-1.19 [.020-.047] note: pa rt numbers are rohs compliant except: indicates non-rohs compliant.
96 catalog 1307191 dimensions are in millimeters dimensions are shown for usa: 1-800-522-6752 south america: 55-11-2103-6000 revised 3-07 and inches unless otherwise reference purposes only. canada: 1-905-470-4425 hong kong: 852-2735-1628 specified. values in brackets specifications subject mexico: 01-800-733-8926 japan: 81-44-844-8013 www.tycoelectronics.com are standard equivalents. to change. c. america: 52-55-1106-0803 uk: 44-8706-080-208 rf coax connectors f series connectors (continued) right-angle pc board mount jack, high temperature 9.65 [.380 ] dia. ?0.00 + 0.13 + .005 ?.000 ?.000 8.89 [.350 ] ?0.00 + 0.13 + .005 0.99 0.08 [.039 .003 ] 4.11 0.08 [.162 .003 ] 8.20 0.08 [.323 .003 ] 2.50 0.08 [.098 .003 ] 4 plcs. dielectric solder post dimensions part bottom middle front plating abc no. acetal acetal polypropylene nickel 35.61 16.89 26.11 5415024-1 1.402 .665 1.028 acetal acetal polypropylene tin 35.61 16.89 26.11 5415024-3 1.402 .665 1.028 ptfe ptfe ptfe tin 25.40 17.91 14.99 5415214-1 * 1.00 .705 .590 *pin in paste reflow / high temperature processing. recommended panel cutout pc board layout right-angle pc board mount jacks (continued) 9.65 [.380 ] dia. ?0.00 + 0.13 + .005 ?.000 8.03 [.316 ] ?0.00 + 0.13 + .005 ?.000 2.26 [.089 ] 4 plcs. 0.08 .003 0.99 [.039 ] 0.08 .003 4.57 [.180 ] 0.08 .003 9.14 [.360 ] 0.08 .003 5.77 [.227 ] 0.08 .003 recommended panel cutout pc board layout body plating center contact dimensions part barrel base plating abc no. nickel tin tin 33.81 15.75 19.86 5415276-2 * 1.331 .620 .782 *connector will accept center conductor diameter range of 0.56-1.19 [.022-.047]. c b a c b a * high temperature versions use ptfe dielectric (see table) note: pa rt numbers are rohs compliant except: indicates non-rohs compliant.
97 catalog 1307191 dimensions are in millimeters dimensions are shown for usa: 1-800-522-6752 south america: 55-11-2103-6000 revised 3-07 and inches unless otherwise reference purposes only. canada: 1-905-470-4425 hong kong: 852-2735-1628 specified. values in brackets specifications subject mexico: 01-800-733-8926 japan: 81-44-844-8013 www.tycoelectronics.com are standard equivalents. to change. c. america: 52-55-1106-0803 uk: 44-8706-080-208 rf coax connectors f series connectors (continued) adapters ve rtical pc board mount jacks connector will accept a center conduc- tor diameter of 0.56?.19 [.022?047] 4.32 0.08 [.170 .003 ] 8.64 0.08 [.340 .003 ] 8.64 0.08 [.340 .003 ] 2.77 0.08 [.109 .003 ] 4 plcs. 1.22 0.08 [.048 .003 ] 4.32 0.08 [.170 .003 ] pc board layout pa rt no. 5415322-2 surface mount, straddle jack contact will accept center conductor diameter range 0.56?.19 [.022?047] center of gravity balanced for automated pick and place and anti-tipping during solder reflow process. 15.88 [.625] 1.91 [.075] 2 plcs. 13.21 [.520] r 1.27 [.050] 14.61 [.575] 9.40 [.370] 18.29 [.720] 12.95 [.510] 0.76 [.030] typ. 1.78 [.070] 1.65 [.065] typ. recommended pc board layout jack to jack feed through adapter jack to plug right-angle adapter pa rt no. 282938-2 part no. 5887089-1 16.0 [.630] 9.50 [.374] 23.62 [.930] dia. 9.65 [.380 ] ?0.00 + 0.13 + .005 ?.000 recommended panel cutout pa rt no. 6274020-1 9.50 [.374] 13.49 [.531] sq. ty p. 8.64 0.08 [.340 .003 ] 1.07 0.05 [.042 .002 ] 4 plcs. 1.37 [.054] 4.32 [.170] 4.32 [.170] 8.64 [.340] 2.36 [.093] 8.64 [.340] typ. 4 plcs. typ. pc board layout 36.45 [1.43] pa rt no. 5887046-1 note: pa rt numbers are rohs compliant except: indicates non-rohs compliant.
98 catalog 1307191 dimensions are in millimeters dimensions are shown for usa: 1-800-522-6752 south america: 55-11-2103-6000 revised 3-07 and inches unless otherwise reference purposes only. canada: 1-905-470-4425 hong kong: 852-2735-1628 specified. values in brackets specifications subject mexico: 01-800-733-8926 japan: 81-44-844-8013 www.tycoelectronics.com are standard equivalents. to change. c. america: 52-55-1106-0803 uk: 44-8706-080-208 rf coax connectors g series connectors bulkhead jack, crimp rg/u termination body cable type plating part no. 179 crimp nickel 5415683-1 te r mination tooling: use 220210-1 die set for contact only. use certi-crimp hand tool 220009-1 for ferrule. bulkhead jack, pc board connector will accept center conductor diameter range 0.97?.65 [.038?065] (415332-1 only) 9.73 ?9.58 [.383 ?.377] 8.15 ?8.00 [.321 ?315] recommended panel cutout f or 5415332-1 9.73 ?9.58 [.383 ?.377] recommended panel cutout f or 6274032-1 pa rt no. 5415332-1 (15 amp) pa rt no. 6274032-1 jack, bulkhead pc board connector will accept center conductor diameter range 0.97?.07 [.038?042] pa rt no. 5887000-1 2.08 [.082] 4 plcs. 7.62 [.300] 3.81 [.150] 1.27 [.050] typ. typ. 7.62 [.300] typ. 2.03 [.080] typ. 1.32 [.052] typ. pa rt no. 6274045-1 ve rtical pc board mount plug pc board layout right-angle pc board mount plug includes board retention feature to prevent tipping during solder process. 10.29 0.08 [.405 .003 ] 9.14 0.08 [.360 .003 ] 1.93 0.08 [.076 .003 ] 4 plcs. 0.89 0.08 [.035 .003 ] 1.37 0.08 [.054 .003 ] 4.57 0.08 [.180 .003 ] pc board layout pa rt no. 5415406-2 note: pa rt numbers are rohs compliant except: indicates non-rohs compliant.
99 catalog 1307191 dimensions are in millimeters dimensions are shown for usa: 1-800-522-6752 south america: 55-11-2103-6000 revised 3-07 and inches unless otherwise reference purposes only. canada: 1-905-470-4425 hong kong: 852-2735-1628 specified. values in brackets specifications subject mexico: 01-800-733-8926 japan: 81-44-844-8013 www.tycoelectronics.com are standard equivalents. to change. c. america: 52-55-1106-0803 uk: 44-8706-080-208 rf coax connectors g series connectors (continued) adapters f jack to g plug bulkhead adapter connector will accept center conductor diameter range of 0.51?.19 [.020?047]. panel nut 887003-3 available for float mounting. pa rt no. 415523-1 12.95 [.510] 11.30 [.445] recommended panel cutout f jack to g jack bulkhead adapter pa rt no. 415327-1 + 0.13 ?0.00 + .005 ] ?.000 9.65 [.380 dia. recommended panel cutout note: pa rt numbers are rohs compliant except: indicates non-rohs compliant.
100 catalog 1307191 dimensions are in millimeters dimensions are shown for usa: 1-800-522-6752 south america: 55-11-2103-6000 revised 3-07 and inches unless otherwise reference purposes only. canada: 1-905-470-4425 hong kong: 852-2735-1628 specified. values in brackets specifications subject mexico: 01-800-733-8926 japan: 81-44-844-8013 www.tycoelectronics.com are standard equivalents. to change. c. america: 52-55-1106-0803 uk: 44-8706-080-208 rf coax connectors sma connectors t yco electronics offers a complete line of sma connectors designed for performance to 18 ghz to satisfy the growing demand for sma connectors in the wireless communications industry. the sma product line offers stainless steel bodies, as well as non- ferrous metals. various plating options are available, including gold and white bronze. the sma interface is fully compatible with mil-c-39012. while still offering various options on military (qpl) approved connectors, t yco electronics has devel- oped a complete offering tailored to the commercial communications industry. this includes 3 piece flexi- ble cable products for pop- ular rg 316, 142 and rd 316 cable utilizing industry standard hex crimps. the sma series meets the performance, quality and application requirements of the commercial market- place. this includes white bronze plating, a unique finish developed by t yco electronics to address the performance needs of the telecommunications market. this plating is highly r esistant to wear, and con- tains no ferrous metals, thus displaying excellent inter- modulation characteristics. to satisfy the broad range of commercial applications, sma connectors are avail- able in a broad range of standard configurations including; straight and right-angle cable applied plugs, bulkhead cable jacks, two and four hole flange mount panel jacks, straight and right-angle pcb mount jacks and various between and in series adapters. numerous pack- aging and testing options are also available to meet specific system criteria as well. additionally, standard military approved (qpl) interfaces are offered as well. including connectors for semi-rigid cable and micro strip applications. the 3 piece sma offering is designed especially for applications in cellular infrastructure where intermodulation products (imp) must be minimized. by limiting non-linearities within the connectors, imp is reduced and increased channel capacity can be offered. product facts performance to 12.4 ghz and beyond a vailable in various base metal options, including stainless steel, brass and zinc diecast uses industry standard crimp tools and processes a vailable with corrosion resistant, non-magnetic white bronze plating meets all performance requirements for mil-c-39012. between series adapters for sma between series adapters, see pages 251-260.
sma connectors (continued) mil-c-39012 applicable paragraph general material 3.3 steel corrosion resistant per astm-a-582 and astm-a-484, type 303. beryllium copper per astm-b-196. ptfe fluorocarbon per astm-d-1710. finish 3.3.1 center contacts shall be gold plated to a min. thickness of .00127 [.00005] in accordance with mil-g-45204, astm-b-488. all other metal parts shall be finished as to provide a connector which meets the corrosion requirements. design 3.4 the design shall be such that the outline shown in this catalog and the interface dimensions of mil-std-348a are met. electrical insulation resistance 3.11 the insulation resistance shall not be less than 10,000 megohms. corona level 3.22 refer to applicable military slash sheet, product drawing or spec. dielectric withstanding voltage 3.17 refer to applicable military slash sheet, product drawing or spec. rf high potential 3.23 refer to applicable military slash sheet, product drawing or spec. contact resistance 3.16 refer to applicable military slash sheet, product drawing or spec. vswr 3.14 refer to applicable military slash sheet, product drawing or spec. frequency range dependent on cable used. rf leakage 3.26 refer to applicable military slash sheet, product drawing or spec. insertion loss 3.27 refer to applicable military slash sheet, product drawing or spec. frequency range dependent on cable used. mechanical f orce to engage 3.5.1 the torque required to engage and disengage shall not exceed 2 in.-lbs. the longitudinal force is not applicable. coupling nut retention 3.25 60 lbs. min. applicable for plug connectors only. coupling proof torque 3.6 15 in.-lbs. min. applicable for plug connectors only. cable retention 3.24 refer to applicable military slash sheet or consult factory. mating characteristics 3.7 applicable to jack connectors only. reference mil-std-348a for dimensions; oversize test pin .953 [.0375] min. dia., .76 - 1.14 [.030-.045] deep, insertion force 3 lbs. max. with .940 [.0370] min. dia. pin, withdrawal force 1 oz. min. with .902 [.0355] max. dia. pin. connector durability 3.15 the connector to be tested and its mating connector shall be subjected to 500 insertion and withdrawal cycles at 12 cycles per minute max. the connector shall show no evidence of mechanical failure and shall meet the mating characteristic requirements. recommended mating torque 7 to 10 in.-lbs. environmental vibration 3.18 specification mil-std-202, method 204, test condition d shock 3.19 specification mil-std-202, method 213, test condition i thermal shock 3.20 refer to applicable military slash sheet or consult factory. corrosion (salt spray) 3.13 specification mil-std-202, method 101, test condition b. moisture resistance 3.21 specification mil-std-202, method 106. no measurements at high humidity. insulation resistance shall be at least 200 megohms within 5 minutes of removal from humidity. specifications 101 catalog 1307191 dimensions are in millimeters dimensions are shown for usa: 1-800-522-6752 south america: 55-11-2103-6000 revised 3-07 and inches unless otherwise reference purposes only. canada: 1-905-470-4425 hong kong: 852-2735-1628 specified. values in brackets specifications subject mexico: 01-800-733-8926 japan: 81-44-844-8013 www.tycoelectronics.com are standard equivalents. to change. c. america: 52-55-1106-0803 uk: 44-8706-080-208 rf coax connectors
102 catalog 1307191 dimensions are in millimeters dimensions are shown for usa: 1-800-522-6752 south america: 55-11-2103-6000 revised 3-07 and inches unless otherwise reference purposes only. canada: 1-905-470-4425 hong kong: 852-2735-1628 specified. values in brackets specifications subject mexico: 01-800-733-8926 japan: 81-44-844-8013 www.tycoelectronics.com are standard equivalents. to change. c. america: 52-55-1106-0803 uk: 44-8706-080-208 rf coax connectors sma connectors (continued) electrical contact resistance insulation dielectric corona rf high frequency vswr (milliohms max.) resistance withstanding extinction rf potential rf connector type cable max. x (fghz) center outer (megohms voltage v oltage at transmission at 5 mhz leakage (ghz) contact contact min.) (volts rms) 70,000 ft. loss (v rms) (db min.) (v rms min.) straight cable plug rg 402 (3.58 [.141]) note 1 1.02 + .005 n/a 2.0 10,000 n/a 250 n/a 670 -(90-fghz) without contact rg 405 (2.16 [.085]) 18.0 1.05 + .005 2.0 2.0 10,000 1000 250 .03 - f(ghz) 670 -(90-fghz) rg 402 (3.58 [.141]) 18.0 1.05 + .005 2.0 2.0 10,000 1500 375 .03 - f(ghz) 1000 -(90-fghz) straight cable plugs 3.58 [.141] microporous 18.0 1.05 + .005 2.0 2.0 10,000 1500 375 .03 - f(ghz) 1000 -(90-fghz) & jacks solder rg 401 (6.35 [.250]) 18.0 1.07 + .007 2.0 2.0 10,000 1500 375 .03 - f(ghz) 1000 -(90-fghz) attachment rg 174, 188, 316 note 1 1.15 + .01 2.0 2.0 10,000 750 190 .06 - f(ghz) 500 -(60-fghz) rg 55, 58, 141, 142, note 1 1.10 + .005 2.0 2.0 10,000 1000 250 .06 - f(ghz) 670 -(60-fghz) 223, 303, 400 straight cable plugs rg 405 (2.16 [.085]) 12.4 1.10 + .015 2.0 2.0 10,000 1000 250 .03 - f(ghz) 670 -(90-fghz) & jacks solder clamp attachment rg 402 (3.58 [.141]) 12.4 1.07 + .01 2.0 2.0 10,000 1500 375 .03 - f(ghz) 1000 -(90-fghz) rg 55, 58, 141, 142 note 1 1.10 + .005 2.0 2.0 10,000 1000 250 .06 - f(ghz) 670 -(60-fghz) straight cable plugs 223, 400 & jacks clamp rg 174, 188, 316 note 1 1.15 + .01 2.0 2.0 10,000 750 190 .06 - f(ghz) 500 -(60-fghz) attachment rg 180, 195 note 1 2.0 2.0 10,000 750 190 500 -(60-fghz) rg 55, 142, 223, 400 note 1 1.10 + .005 2.0 2.0 10,000 1000 250 .06 - f(ghz) 670 -(60-fghz) straight cable plugs rg 58, 141, 303 note 1 1.10 + .005 2.0 2.0 10,000 1000 250 .06 - f(ghz) 670 -(60-fghz) & jacks crimp rg 174, 188, 316 note 1 1.15 + .01 2.0 2.0 10,000 750 190 .06 - f(ghz) 500 -(60-fghz) attachment rg 180, 195 note 1 2.0 2.0 10,000 750 190 500 -(60-fghz) rg 178, 196 note 1 1.2 + .02 2.0 2.0 10,000 500 125 .06 - f(ghz) 335 -(60-fghz) straight cable plugs rg 401 (6.35 [.250]) 18.0 1.07 + .01 2.0 2.0 10,000 1500 375 .05 - f(ghz) 1000 -70 db min. & jacks compression 6.35 [.250] microporous 18.0 1.07 + .01 2.0 2.0 10,000 1500 375 .05 - f(ghz) 1000 -70 db min. clamp attachment 6.35 [.250] 3 spline 18.0 1.07 + .01 2.0 2.0 10,000 1500 375 .05 - f(ghz) 1000 -70 db min. 6.35 [.250] 5 spline 18.0 1.07 + .01 2.0 2.0 10,000 1500 375 .05 - f(ghz) 1000 -70 db min. rg 405 (2.16 [.085]) 12.4 1.18 + .015 2.0 2.0 10,000 1000 250 .04 - f(ghz) 670 -(90-fghz) rg 405 (2.16 [.085]) 18.0 1.18 + .015 2.0 2.0 10,000 1000 250 .04 - f(ghz) 670 -(90-fghz) right-angle cable rg 402 (3.58 [.141]) 12.4 1.15 + .015 2.0 2.0 10,000 1500 325 .04 - f(ghz) 1000 -(90-fghz) plugs solder rg 402 (3.58 [.141]) 18.0 1.10 + .010 2.0 2.0 10,000 1500 250 .05 - f(ghz) 1000 -(90-fghz) attachment rg 55, 58, 141, 142, note 1 1.15 + .01 2.0 2.0 10,000 1000 250 .07 - f(ghz) 670 -(60-fghz) 223, 303, 400 rg 174, 188, 316 note 1 1.15 + .02 2.0 2.0 10,000 750 190 .07 - f(ghz) 500 -(60-fghz) rg 55, 142, 223, 400 note 1 1.15 + .02 2.0 2.0 10,000 1000 250 .07 - f(ghz) 670 -(60-fghz) right-angle cable rg 58, 141, 303 note 1 1.15 + .02 2.0 2.0 10,000 1000 250 .07 - f(ghz) 670 -(60-fghz) plugs crimp rg 174, 188, 316 note 1 1.18 + .02 2.0 2.0 10,000 750 190 .07 - f(ghz) 500 -(60-fghz) attachment rg 180, 195 note 1 2.0 2.0 10,000 750 190 500 -(60-fghz) rg 178, 196 note 1 1.25 + .025 2.0 2.0 10,000 500 125 .07 - f(ghz) 335 -(60-fghz) rg 55, 58, 141, 142, note 1 1.10 + .005 2.0 2.0 10,000 1000 250 .08 - f(ghz) 670 -(60-fghz) right-angle cable 223, 303 plugs clamp rg 174, 188, 316 note 1 1.15 + .01 2.0 2.0 10,000 750 190 .08 - f(ghz) 500 -(60-fghz) attachment rg 180, 195 note 1 2.0 2.0 10,000 750 190 500 -(60-fghz) non-captured 18.0 1.03 + .004 2.0 2.0 10,000 1000 250 .03 - f(ghz) 670 -(100-fghz) flange mount plugs epoxy captured 18.0 1.05 + .005 2.0 2.0 10,000 1000 250 .03 - f(ghz) 670 -(60-fghz) & jacks panel or mechanical capture 18.0 1.04 + .004 2.0 2.0 10,000 1000 250 .03 - f(ghz) 670 -(100-fghz) bulkhead mount field replaceable 18.0 1.04 + .006 2.0 2.0 10,000 1000 250 .04 - f(ghz) 670 -(100-fghz) hermetic launchers bulkhead epoxy captured 18.0 1.07 + .010 2.0 2.0 10,000 1000 250 .04 - f(ghz) 670 -(60-fghz) feedthrough jacks mechanical capture 18.0 1.07 + .010 2.0 2.0 10,000 1000 250 .04 - f(ghz) 670 -(100-fghz) right-angle flange n/a 18.0 1.07 + .015 2.0 2.0 10,000 1000 250 .08 - f(ghz) 670 -(90-fghz) mount jacks n/a 12.4 1.15 + .015 2.0 2.0 10,000 1000 250 .08 - f(ghz) 670 -(90-fghz) printed circuit board n/a 18.0 n/a 2.0 2.0 10,000 1000 250 n/a 670 n/a mount straight terminal right-angle n/a 12.4 n/a 2.0 2.0 10,000 1000 250 n/a 670 n/a printed circuit end launch n/a 18.0 1.05 + .005 2.0 2.0 10,000 1000 250 .03 - f(ghz) 670 -(60-fghz) stripline circuit surface launch n/a 18.0 1.05 + .005 2.0 2.0 10,000 1000 250 .03 - f(ghz) 670 -(60-fghz) stripline circuit right-angle surface n/a 12.4 1.15 + .015 2.0 2.0 10,000 1000 250 .08 - f(ghz) 670 -(60-fghz) launch stripline circuit n/a 18.0 1.07 + .015 2.0 2.0 10,000 1000 250 .08 - f(ghz) 670 -(60-fghz) 1. maximum operating frequency of cable per mil-c-17. 2. specifications do not apply to hermetic or compression crimp connectors. 3. for brass sma: frequency range dc-6ghz, impedance 50 ohms, insulation resistance.
sma connectors (continued) interface mating dimensions f d g dia. j dia. b dia. ref. plane note 2 a dia. b dia. a dia. h dia. d e c ref. plane note 2 c d h e g f k .250-36 uns-2b thd. .250-36 uns-2a thd. g dia. h dia. plug b plug a plug dimension minimum maximum a 6.35 .250 b 4.59 .1808 c 3.43 .135 d 0.00 0.25 .000 .010 e 2.54 .100 f 0.00 0.25 .000 .010 g 0.90 0.94 .0355 .037 h 0.00 0.38 .000 .015 jack dimension minimum maximum a 5.28 5.49 .208 .216 b 4.60 .181 c 1.91 1.98 .075 .078 d 0.00 0.25 .000 .010 e 0.38 1.43 .015 .045 f 2.92 .115 g 0.00 0.25 .000 .010 h 4.32 .170 j .124 1.30 .049 .051 k 5.54 .218 notes: 1. id to meet vswr and contact resistance when mated with 0.51 +.025/-.013 [.036 +.0010/-.0005] dia. pin. 2. when fully engaged, the two reference planes must coincide with metal to metal contact. 3. metric equivalents (to the nearest 0.01mm) are given for general information only. 103 catalog 1307191 dimensions are in millimeters dimensions are shown for usa: 1-800-522-6752 south america: 55-11-2103-6000 revised 3-07 and inches unless otherwise reference purposes only. canada: 1-905-470-4425 hong kong: 852-2735-1628 specified. values in brackets specifications subject mexico: 01-800-733-8926 japan: 81-44-844-8013 www.tycoelectronics.com are standard equivalents. to change. c. america: 52-55-1106-0803 uk: 44-8706-080-208 rf coax connectors
104 catalog 1307191 dimensions are in millimeters dimensions are shown for usa: 1-800-522-6752 south america: 55-11-2103-6000 revised 3-07 and inches unless otherwise reference purposes only. canada: 1-905-470-4425 hong kong: 852-2735-1628 specified. values in brackets specifications subject mexico: 01-800-733-8926 japan: 81-44-844-8013 www.tycoelectronics.com are standard equivalents. to change. c. america: 52-55-1106-0803 uk: 44-8706-080-208 rf coax connectors sma connectors (continued) flexible cable straight cable plug, solder heat shrink tubing 7.9 [.312] hex. ref. plane a 16.7 [.658] ref. 30.2 [1.187] ref. cable type body material contact contact dimension instruction part rg/u & finish captivation attachment a sheet no. 55, 58, 141, 142, stainless, gold 1 no solder 19.7 408-4821 1051638-1 223, 303, 400 .775 174, 188, 316 stainless, gold 1 no solder 17.5 408-4756 1051644-1 .690 1 coupling nut is passivated stainless steel. straight cable jack, solder .250-36 uns-2a heat shrink tubing ref. plane 16.6 [.654] ref. a 6.4 [.250] hex. 25.6 [1.007] ref. cable type body material contact contact dimension instruction part rg/u & finish captivation attachment a sheet no. 55, 58, 141, 142, stainless, gold no solder 18.5 408-4820 1051852-1 223, 303, 400 .730 bulkhead cable jack, solder ref. plane .250-36 uns-2a 7.9 [.312] hex. 3.2 [.125] max. panel 9.50 [.374] ref. a 31.10 [1.225] ref. 11.4 [.450] recommended mounting hole 6.4 [.250] min. 6.0 [.235] min. shrink tubing cable type body material contact contact dimension instruction part rg/u & finish captivation attachment a sheet no. rg 55, 58, stainless, gold no solder 24.0 408-4817 1051861-1 141, 142, 300 .945 174, 188, 316 stainless, gold no solder 21.0 408-4817 1051942-1 .825 note: pa rt numbers are rohs compliant except: indicates non-rohs compliant.
sma connectors (continued) flexible cable (continued) right-angle cable plug, solder ref. plane 7.9 [.312] hex. heat shrink tubing 16.9 [.666] ref. 13.5 [.530] ref. 10.5 [.413] ref. a ref. 25.9 [1.020] cable type body material contact contact dimension instruction part rg/u & finish captivation attachment a sheet no. 55, 58, 141, 142, stainless, gold 1 ye s solder 16.0 408-4816 1052063-1 223, 303, 400 .630 174, 188, 316 stainless, gold 1 ye s solder 11.2 408-4815 1052067-1 .440 1 coupling nut is passivated stainless steel. straight cable plug, clamp cable type body material contact contact dimension instruction part rg/u & finish captivation attachment a sheet no. 174, 188, 316 stainless, pass. yes solder 2.9 408-4906 1050721-1 .116 19.0 [.750] a ref. 7.9 [.312] hex straight cable jack, clamp cable type body material contact contact dimension instruction part rg/u & finish captivation attachment a sheet no. 174, 188, 316 stainless, pass. yes solder 2.9 408-4906 1050903-1 .116 17.8 [.700] a ref. 7.9 [.312] hex 105 catalog 1307191 dimensions are in millimeters dimensions are shown for usa: 1-800-522-6752 south america: 55-11-2103-6000 revised 3-07 and inches unless otherwise reference purposes only. canada: 1-905-470-4425 hong kong: 852-2735-1628 specified. values in brackets specifications subject mexico: 01-800-733-8926 japan: 81-44-844-8013 www.tycoelectronics.com are standard equivalents. to change. c. america: 52-55-1106-0803 uk: 44-8706-080-208 rf coax connectors note: pa rt numbers are rohs compliant except: indicates non-rohs compliant.
106 catalog 1307191 dimensions are in millimeters dimensions are shown for usa: 1-800-522-6752 south america: 55-11-2103-6000 revised 3-07 and inches unless otherwise reference purposes only. canada: 1-905-470-4425 hong kong: 852-2735-1628 specified. values in brackets specifications subject mexico: 01-800-733-8926 japan: 81-44-844-8013 www.tycoelectronics.com are standard equivalents. to change. c. america: 52-55-1106-0803 uk: 44-8706-080-208 rf coax connectors sma connectors (continued) flexible cable (continued) bulkhead feedthrough cable jack, clamp cable type body material contact contact instruction part rg/u & finish captivation attachment sheet no. 174, 188, 316 stainless, pass. yes solder 408-4704 1050996-1 ref. plane .250-36, uns-2a recommended mounting hole 7.9 [.312] hex. 3.2 [.125] max. panel 6.4 [.250] min. 6.0 [.235] min. 9.5 [.374] ref. 22.6 [.890] max. 11.4 [.450] right-angle cable plug, clamp cable type body material contact contact instruction part rg/u & finish captivation attachment sheet no. 174, 188, 316 stainless, pass. mechanical solder 408-4965 1051140-1 14.3 [.562] max. 18.0 [.710] max. 7.9 [.312] hex. ref. plane 16.9 [.665] ref. 12.9 [.509] ref. 10.0 [.392] ref. straight cable plug, crimp 25.4 [1.00] ref. 22.4 [.883] ref. 7.9 [.312] hex. ref. plane cable type body material contact contact crimp instruction part rg/u & finish captivation attachment t ooling sheet no. part no. 174, 179, 187, stainless, pass. mechanical solder/crimp 2 1055236-1 408-4661 1056443-1 188, 316 rd316 stainless, pass. mechanical solder/crimp 2 1055236-1 1 408-4661 1056436-1 55, 142, 223, 400 stainless, pass. mechanical solder/crimp 2 1055236-1 408-4661 1056438-1 174, 179, 187, brass, mechanical solder/crimp 2 1055236-1 408-4661 1082034-1 188, 316 white bronze 1 use die 1055270-1 to crimp rd316 ferrule. 2 use die 1055880-1 to crimp center contact. note: pa rt numbers are rohs compliant except: indicates non-rohs compliant.
sma connectors (continued) flexible cable (continued) straight cable jack, crimp 27.43 [1.080] max. 6.35 [.250] hex. cable type body material contact contact crimp instruction part rg/u & finish captivation attachment t ooling sheet style no. part no. 174, 316 brass, nickel mechanical solder 1 408-4032 a 5447648-3 58, 141, 303 stainless, pass. mechanical solder 1055236-1 408-4704 b 1051867-1 174, 188, 316 stainless, pass. mechanical solder 1055236-1 408-4708 b 1051855-1 178, 196 stainless, pass. mechanical solder 1055236-1 408-4806 b 1051869-1 1 refer to tyco electronics customer print for tooling requirement. daniels mil tooling used for contact and ferrule crimp. bulkhead feedthrough cable jack, crimp 26.4 [1.040] 6.4 [.250] 6.0 [.235] ref. 11.4 [.450] dia. min. 3.2 [.125] max. panel min. 7.9 [.312] hex .250-36 uns-2a lock washer recommended mounting hole cable type body material contact contact crimp instruction part rg/u & finish captivation attachment t ooling sheet no. part no. 174, 179, 187, stainless, pass. mechanical solder/crimp 2 1055236-1 408-4661 1056452-1 188, 316 rd316 stainless, pass. mechanical solder/crimp 2 1055236-1 3 408-4661 1056445-1 58, 141, 303 stainless, pass. mechanical solder/crimp 2 1055236-1 408-4661 1056450-1 55, 142, stainless, pass. mechanical solder/crimp 2 1055236-1 408-4661 1056447-1 223, 400 174, 188, 316 brass, nickel mechanical crimp 1 408-4032 5448103-2 1 refer to tyco electronics customer print for tooling requirement. daniels mil tooling used for contact and ferrule crimp. 2 use die 1055880-1 to crimp center contact. 3 use die 1055270-1 to crimp rd316 ferrule. style a .250-36 uns-2a heat shrink tubing ref. plane 19.3 [.761] ref. hex. 21.3 [.837] ref. 6.4 [.250] hex. 7.9 [.312] 33.1 [1.304] ref. style b 107 catalog 1307191 dimensions are in millimeters dimensions are shown for usa: 1-800-522-6752 south america: 55-11-2103-6000 revised 3-07 and inches unless otherwise reference purposes only. canada: 1-905-470-4425 hong kong: 852-2735-1628 specified. values in brackets specifications subject mexico: 01-800-733-8926 japan: 81-44-844-8013 www.tycoelectronics.com are standard equivalents. to change. c. america: 52-55-1106-0803 uk: 44-8706-080-208 rf coax connectors note: pa rt numbers are rohs compliant except: indicates non-rohs compliant. daniels is a trademark of daniels manufacturing corporation.
108 catalog 1307191 dimensions are in millimeters dimensions are shown for usa: 1-800-522-6752 south america: 55-11-2103-6000 revised 3-07 and inches unless otherwise reference purposes only. canada: 1-905-470-4425 hong kong: 852-2735-1628 specified. values in brackets specifications subject mexico: 01-800-733-8926 japan: 81-44-844-8013 www.tycoelectronics.com are standard equivalents. to change. c. america: 52-55-1106-0803 uk: 44-8706-080-208 rf coax connectors sma connectors (continued) flexible cable (continued) right-angle cable plug, crimp 20.4 [.802] ref. 10.5 [.413] ref. 13.5 [.530] ref. 16.9 [.665] ref. 17.2 [.677] ref. ref. plane 7.9 [.312] hex. cable type body material contact contact crimp instruction part rg/u & finish captivation attachment t ooling sheet no. part no. 174, 179, 187, stainless, pass. mechanical solder 1055236-1 408-4659 1056462-1 188, 316 58, 141, 303 stainless, pass. mechanical solder 1055236-1 408-4659 1056456-1 right-angle cable plug, crimp 12.1 [.475] ref. 27.0 [1.062] 16.9 [.665] ref. 7.9 [.312] hex ref. ref. 13.4 [.530] cable type body material contact contact crimp instruction part rg/u & finish captivation attachment t ooling sheet no. part no. 55, 142, stainless, pass. epoxy solder 1055236-1 408-4681 1052072-1 223, 400 174, 188, 316 stainless, pass. epoxy solder 1055236-1 408-4683 1052076-1 178, 196 stainless, pass. epoxy solder 1055236-1 408-4801 1052098-1 note: pa rt numbers are rohs compliant except: indicates non-rohs compliant.
sma connectors (continued) flexible cable (continued) straight push-on 20.65 [.813] ref. 27.97 [1.101] ref. 6.35 [.250] plug sleeve clearance area min. 17.32 [.682] ref. 14.15 [.557] ref. ref. plane 5.49 [.216] max. 12.70 [.500] 5.08 0.13 [.200 .005 ] thread length 27.61 [1.087] ref. 31.50 [1.240] ref. 6.35 [.250] plug sleeve clearance area min. ref. plane 5.49 [.216] max. 12.70 [.500] 5.08 0.13 [.200 .005 ] thread length right-angle push-on 109 catalog 1307191 dimensions are in millimeters dimensions are shown for usa: 1-800-522-6752 south america: 55-11-2103-6000 revised 3-07 and inches unless otherwise reference purposes only. canada: 1-905-470-4425 hong kong: 852-2735-1628 specified. values in brackets specifications subject mexico: 01-800-733-8926 japan: 81-44-844-8013 www.tycoelectronics.com are standard equivalents. to change. c. america: 52-55-1106-0803 uk: 44-8706-080-208 rf coax connectors cable type body material contact contact part rg/u & finish captivation attachment no. 316 beryllium copper, gold mechanical solder/crimp 1274694-1 cable type body material contact contact part rg/u & finish captivation attachment no. 316 beryllium copper, gold mechanical crimp 1408541-1 note: pa rt numbers are rohs compliant except: indicates non-rohs compliant.
110 catalog 1307191 dimensions are in millimeters dimensions are shown for usa: 1-800-522-6752 south america: 55-11-2103-6000 revised 3-07 and inches unless otherwise reference purposes only. canada: 1-905-470-4425 hong kong: 852-2735-1628 specified. values in brackets specifications subject mexico: 01-800-733-8926 japan: 81-44-844-8013 www.tycoelectronics.com are standard equivalents. to change. c. america: 52-55-1106-0803 uk: 44-8706-080-208 rf coax connectors sma connectors (continued) direct solder attachment, semi-rigid cable straight cable plug 8.40 [.330] 5.4 [.213] ref. 3.66 [.144] cable type body material contact contact solder instruction part rg/u & finish captivation attachment assembly kit sheet no. part no. 402 (3.58 [.141]) stainless, pass. no center no center 1055420-1 408-4761 1050757-1 contact contact straight cable plug 8.1 [.320] ref. 11.2 [.440] ref. 4.6 [.180] 3.67 [.144] rg402/u 2.26 [.089] rg405/u cable type body material contact contact solder instruction part rg/u & finish captivation attachment assembly kit sheet no. part no. 402 (3.58 [.141]) stainless, gold 1 no solder 1055420-1 408-4764 1050525-1 405 (2.16 [.085]) stainless, gold 1 no solder 1055420-1 408-4765 1050770-1 402 (3.58 [.141]) stainless, gold 1 no center no center n/a 1050542-1 contact contact 405 (2.16 [.085]) stainless, gold 1 no solder 1055420-1 1050548-1 1 coupling nut is passivated stainless steel. straight cable jack 12.7 [.500] 3.66 [.144] rg402/u 2.26 [.089] rg405/u 10.8 [.424] ref. cable type body material contact contact solder instruction part rg/u & finish captivation attachment assembly kit sheet no. part no. 402 (3.58 [.141]) stainless, gold no solder 1055420-1 408-4767 1050854-1 405 (2.16 [.085]) stainless, gold no solder 1055420-1 408-4833 1050859-1 note: pa rt numbers are rohs compliant except: indicates non-rohs compliant.
sma connectors (continued) direct solder attachment, semi-rigid cable (continued) bulkhead cable jack recommended mounting hole 8.6 [.339] ref. 6.0 [.235] 10.5 [.415] 12.7 [.500] 19.0 [.748] 2.4 [.093] 4.6 [.180] 3.66 [.144] rg402/u 2.26 [.089] rg405/u max panel min. 6.4 [.250] min. cable type body material contact contact solder instruction part rg/u & finish captivation attachment assembly kit sheet no. part no. 402 (3.58 [.141]) brass, gold no solder 1055420-1 408-4768 1082029-1 2 hole flange mount cable jack 15.9 [.625] 2.6 [.102] 12.2 [.481] 5.7 [.223] 14.2 [.560] 9.5 [.375] 1.7 [.065] 7.6 [.299] .250-36 uns-2a 2 plcs. ref. 3.66 [.144] rg402/u 2.26 [.089] rg405/u cable type body material contact contact solder instruction part rg/u & finish captivation attachment assembly kit sheet no. part no. 402 (3.58 [.141]) stainless, gold no solder 1055420-1 408-4767 1051052-1 405 (2.16 [.085]) stainless, gold no solder 1055420-1 408-4883 1051046-1 4 hole flange mount cable jack 14.2 [.560] 7.6 [.299] 9.5 [.375] 8.6 [.340] 2.6 [.102] 3.66 [.144] rg402/u 2.26 [.089] rg405/u 12.7 [.500] 4 plcs. 2 plcs. sq. ref. cable type body material contact contact solder instruction part rg/u & finish captivation attachment assembly kit sheet no. part no. 402 (3.58 [.141]) stainless, gold no solder 1055420-1 408-4767 1051081-1 405 (2.16 [.085]) stainless, gold no solder 1055420-1 408-4883 1051085-1 111 catalog 1307191 dimensions are in millimeters dimensions are shown for usa: 1-800-522-6752 south america: 55-11-2103-6000 revised 3-07 and inches unless otherwise reference purposes only. canada: 1-905-470-4425 hong kong: 852-2735-1628 specified. values in brackets specifications subject mexico: 01-800-733-8926 japan: 81-44-844-8013 www.tycoelectronics.com are standard equivalents. to change. c. america: 52-55-1106-0803 uk: 44-8706-080-208 rf coax connectors note: pa rt numbers are rohs compliant except: indicates non-rohs compliant.
112 catalog 1307191 dimensions are in millimeters dimensions are shown for usa: 1-800-522-6752 south america: 55-11-2103-6000 revised 3-07 and inches unless otherwise reference purposes only. canada: 1-905-470-4425 hong kong: 852-2735-1628 specified. values in brackets specifications subject mexico: 01-800-733-8926 japan: 81-44-844-8013 www.tycoelectronics.com are standard equivalents. to change. c. america: 52-55-1106-0803 uk: 44-8706-080-208 rf coax connectors sma connectors (continued) semi-rigid cable right-angle cable plug, direct solder attachment 7.9 [.312] hex. ref. plane 17.1 [.675] ref. 7.9 [.312] ref. 13.6 [.535] ref. 10.5 [.413] ref. 3.66 [.144] rg402/u 2.26 [.089] rg405/u cable type body material contact contact solder instruction part rg/u & finish captivation attachment assembly kit sheet no. part no. 402 (3.58 [.141]) stainless, gold 1 epoxy solder 1055420-1 408-4831 1051151-1 405 (2.16 [.085]) stainless, gold 1 epoxy solder 1055420-1 408-4831 1051157-1 405 (2.16 [.085]) brass, gold mechanical solder 1055420-1 408-4831 1088312-1 1 coupling nut is passivated stainless steel. straight cable plug, crimp 9.8 [.387] ref. 6.9 [.270] rg402/u 7.1 [.278] rg405/u 3.63 [.143] rg402/u 2.26 [.089] rg405/u ref cable type body material contact contact crimp instruction part rg/u & finish captivation attachment t ooling sheet no. part no. 405 (2.16 [.085]) stainless, pass. mechanical solderless 1055835-1 408-4695 1050598-1 402 (3.58 [.141]) stainless, pass. no center contact solderless 1055835-1 408-4690 1050740-1 straight cable plug ? low profile, crimp 5.8 [.229] ref. 8.6 [.337] ref. 3.66 [.144] rg402/u 2.26 [.089] rg405/u cable type body material contact contact crimp instruction part rg/u & finish captivation attachment t ooling sheet no. part no. 402 (3.58 [.141]) stainless, pass. mechanical solderless 1055835-1 408-4696 1050602-1 405 (2.16 [.085]) stainless, pass. mechanical solderless 1055835-1 408-4697 1050611-1 note: pa rt numbers are rohs compliant except: indicates non-rohs compliant.
sma connectors (continued) semi-rigid cable (continued) 2 hole flange, crimp 16.70 [.657] max. 6.30 [.250] 6.00 [.235] dia. min. osm jack after crimping 14.50 [.569] ref. 8.60 [.339] ref. 7.90 [.312] hex. 11.10 [.437] hex. ref. plane after crimping cable type body material contact contact crimp instruction part rg/u & finish captivation attachment t ooling sheet no. part no. 402 (3.58 [.141]) stainless, pass. mechanical solderless 1055835-1 408-4954 1051005-1 405 (2.16 [.085]) stainless, pass. mechanical solderless 1055835-1 408-4689 1051007-1 right-angle cable plug, crimp 3.63 [.143] rg402/u 2.26 [.089] rg405/u 7.9 [.312] hex. ref. plane 15.8 [.622] ref. 12.6 [.497] ref. 9.7 [.383] ref. 14.43 [.568] after crimping 11.25 [.443] ref. after crimping cable type body material contact contact crimp instruction part rg/u & finish captivation attachment t ooling sheet no. part no. 402 (3.58 [.141]) stainless, pass. mechanical solderless 1055835-1 408-4691 1051145-1 405 (2.16 [.085]) stainless, pass. mechanical solderless 1055835-1 408-4692 1051147-1 113 catalog 1307191 dimensions are in millimeters dimensions are shown for usa: 1-800-522-6752 south america: 55-11-2103-6000 revised 3-07 and inches unless otherwise reference purposes only. canada: 1-905-470-4425 hong kong: 852-2735-1628 specified. values in brackets specifications subject mexico: 01-800-733-8926 japan: 81-44-844-8013 www.tycoelectronics.com are standard equivalents. to change. c. america: 52-55-1106-0803 uk: 44-8706-080-208 rf coax connectors recommended mounting hole note: pa rt numbers are rohs compliant except: indicates non-rohs compliant.
2 hole flange mount jack receptacle 14.6 [.575] 9.5 [.375] 1.7 [.065] 5.7 [.223] 12.2 [.481] typ. 1.3 [.050] 0.8 [.031] dia. min. dia. 2.6 [.102] dia. 2 plcs. 15.9 [.625] body material contact rf leakage temperature part & finish captivation db min. range no. stainless, passivated epoxy -(60-fghz) -65 to 125 c 1052544-1 2 hole flange mount jack receptacle .250-36 uns-2a ref. plane 7.6 [.299] ref. 1.7 [.065] 9.5 [.375] 14.6 [.575] 0.8 [.030] 5.7 [.223] 12.2 [.481] 4.1 [.162] 15.9 [.625] 1.3 [.050] 0.8 [.031] 2.6 [.102] 2 plcs. body material contact rf leakage temperature part & finish captivation db min. range no. stainless, passivated epoxy -(60-fghz) -65 to 125 c 1052534-1 114 catalog 1307191 dimensions are in millimeters dimensions are shown for usa: 1-800-522-6752 south america: 55-11-2103-6000 revised 3-07 and inches unless otherwise reference purposes only. canada: 1-905-470-4425 hong kong: 852-2735-1628 specified. values in brackets specifications subject mexico: 01-800-733-8926 japan: 81-44-844-8013 www.tycoelectronics.com are standard equivalents. to change. c. america: 52-55-1106-0803 uk: 44-8706-080-208 rf coax connectors sma connectors (continued) panel mount, solder pot terminal 4 hole flange mount plug receptacle 12.7 [.500] sq. 18.0 [.707] ref. 12.9 [.507] 1.7 [.065] ref. 8.6 [.340] typ. 1.3 [.050] dia. 7.9 [.312] hex 6.4 [.250] dia. min. 2.6 [.102] dia. 4 plcs. body material contact rf leakage temperature part & finish captivation db min. range no. stainless, passivated epoxy n/a -65 to 125 c 1052324-1 4 hole flange mount jack receptacle .250-36uns-2a 4 plcs. ref. plane 14.6 [.575] 2.6 [.102] 12.7 [.500] sq. 8.6 [.340] typ. 1.3 [.050] 0.9 [.035] 7.6 [.299] 9.5 [.375] 1.7 [.065] body material contact rf leakage temperature part & finish captivation db min. range no. stainless, passivated epoxy -(60-fghz) -65 to 125 c 1052422-1 note: pa rt numbers are rohs compliant except: indicates non-rohs compliant.
sma connectors (continued) panel mount bulkhead feedthrough jack receptacle, solder pot terminal 6.0 [.235] 6.4 [.250] 17.0 [.668] 12.7 [.500] 1.6 [.062] 1.3 [.050] 4.1 [.162] 7.9 [.312] recommended mounting hole min. min. dia. hex. dia. body material contact rf leakage temperature part & finish captivation db min. range no. stainless, passivated epoxy n/a -65 to 125 c 1053092-1 press-in cable, jack panel recommended mounting hole + 0.03 ?0.01 + .0010 ?.0004 7.00 [.276 ] 13.00 0.10 [.512 .004 ] 9.60 0.10 [.378 .004 ] 1/4" - 36 uns-2a + 0.05 ?0.03 + .002 ?.001 7.40 [.291 ] 4.00 0.10 [.157 .004 ] 11.00 0.10 [.433 .004 ] 1.50 0.10 [.059 .004 ] 22.40 [.882] 115 catalog 1307191 dimensions are in millimeters dimensions are shown for usa: 1-800-522-6752 south america: 55-11-2103-6000 revised 3-07 and inches unless otherwise reference purposes only. canada: 1-905-470-4425 hong kong: 852-2735-1628 specified. values in brackets specifications subject mexico: 01-800-733-8926 japan: 81-44-844-8013 www.tycoelectronics.com are standard equivalents. to change. c. america: 52-55-1106-0803 uk: 44-8706-080-208 rf coax connectors cable type body material contact temperature rg/u & finish captivation range part no. 316 d brass, gold mechanical ?5 to 125 c 619115-1 press-in jacks, straight terminal 8.50 0.60 [.335 .024 ] 10.10 0.10 [.398 .004 ] 6.10 0.10 [.240 .004 ] 2.50 0.20 [.098 .008 ] 5.50 [.217] ref. + 0.03 ?0.07 + .001 ?.003 0.50 [.020 ] 8.90 0.20 [.350 .008 ] pa rt number 1460468 1.10 0.10 [.043 .004 ] 4.50 0.10 [.177 .004 ] + 0.00 ?0.10 + .000 ?.004 1.00 [.039 ] + 0.10 ?0.20 + .004 ?.008 8.00 [.315 ] + 0.40 ?0.20 + .016 ?.008 3.50 [.138 ] + 0.02 ?0.03 + .0008 ?.0012 5.05 [.199 ] 14.10 0.20 [.555 .008 ] 2.00 0.10 [.079 .004 ] 5.00 0.10 [.197 .004 ] pa rt number 1460469 body material contact rf leakage temperature part & finish captivation db min. range no. brass, white bronze mechanical n/a ?5 to 125 c 1460468-1 brass, gold mechanical n/a ?5 to 125 c 1460469-1 note: pa rt numbers are rohs compliant except: indicates non-rohs compliant.
116 catalog 1307191 dimensions are in millimeters dimensions are shown for usa: 1-800-522-6752 south america: 55-11-2103-6000 revised 3-07 and inches unless otherwise reference purposes only. canada: 1-905-470-4425 hong kong: 852-2735-1628 specified. values in brackets specifications subject mexico: 01-800-733-8926 japan: 81-44-844-8013 www.tycoelectronics.com are standard equivalents. to change. c. america: 52-55-1106-0803 uk: 44-8706-080-208 rf coax connectors sma connectors (continued) panel mount, straight terminal 4 hole flange mount jack receptacle .250-36 uns-2a 9.5 [.375] ref. plane 7.6 [.299] ref. 1.7 [.065] 14.99 [.590 ] 0.25 0 27.43 [1.080 ] 0.25 0 1.3 [.050] 4.1 [.162] 2.6 [.102] 12.7 [.500] sq. 8.6 [.340] typ. 4 plcs. body material contact rf leakage temperature part & finish captivation db min. range no. stainless, passivated none -(100-fghz) -65 to 165 c 1052518-1 stainless, passivated epoxy -(60-fghz) -65 to 125 c 1052523-1 stainless, gold epoxy -(60-fghz) -65 to 125 c 1052522-1 2 hole flange mount plug receptacle 1.3 [.050] 4.1 [.162] dia. 7.9 [.312] hex 2.6 [.102] 15.9 [.625] 12.2 [.481] dia. 2 plcs. ref. 25.3 [.995] 6.6 [.260] ref. 12.9 [.507] 1.7 [.065] 8.4 [.330] body material contact rf leakage temperature part & finish captivation db min. range no. stainless, passivated epoxy -(60-fghz) -65 to 125 c 1052349-1 2 hole flange mount jack receptacle 5.7 [.223] 12.2 [.481] 15.9 [.625] 2.6 [.102] 2 plcs. .250-36 uns-2a ref. plane 9.5 [.375] 7.6 [.299] ref. 1.7 [.065] 14.99 [.590 ] 0.25 0 27.43 [1.080 ] 0.25 0 1.3 [.050] 4.1 [.162] body material contact rf leakage temperature part & finish captivation db min. range no. stainless, passivated epoxy -(60-fghz) -65 to 125 c 1052552-1 note: pa rt numbers are rohs compliant except: indicates non-rohs compliant.
117 catalog 1307191 dimensions are in millimeters dimensions are shown for usa: 1-800-522-6752 south america: 55-11-2103-6000 revised 3-07 and inches unless otherwise reference purposes only. canada: 1-905-470-4425 hong kong: 852-2735-1628 specified. values in brackets specifications subject mexico: 01-800-733-8926 japan: 81-44-844-8013 www.tycoelectronics.com are standard equivalents. to change. c. america: 52-55-1106-0803 uk: 44-8706-080-208 rf coax connectors sma connectors (continued) panel mount, straight terminal (continued) bulkhead feedthrough jack receptacle .250-36 uns-2a lockwasher ref. plane 10.82 [.426] ref. 7.9 [.312] hex. 4.1 [.162] 1.3 [.050] 12.7 [.500] 4.1 [.160] 1.9 [.076] body material contact rf leakage temperature part & finish captivation db min. range no. stainless, passivated epoxy -(60-fghz) -65 to 125 c 1053222-1 2 hole flange mount right-angle jack receptacle 11.6 [.458] 1.7 [.065] 4.1 [.162] 1.3 [.050] 15.9 [.625] 12.2 [.481] 5.7 [.223] 2.6 [.102] 2 plcs. 15.0 0.25 [.590 .010 ] 11.1 0.13 [.437 .001 ] 7.9 0.25 [.312 .010 ] body material contact rf leakage temperature part & finish captivation db min. range no. stainless, passivated mechanical -(90-fghz) -65 to 165 c 1052986-1 4 hole flange mount right-angle jack receptacle 8.6 [.340] 12.7 [.500] sq. 2.6 [.102] 4 plcs. typ. 4.1 [.162] 1.3 [.050] .250-36 uns-2a ref. plane 11.6 [.458] 9.7 [.382] ref. 1.7 [.065] 9.65 0.25 [.380 .010 ] 12.83 0.25 [.505 .010 ] 17.91 0.25 [.705 .010 ] 14.99 0.25 [.590 .010 ] body material contact rf leakage temperature part & finish captivation db min. range no. stainless, passivated mechanical -(90-fghz) -65 to 165 c 1052978-1 stainless, passivated mechanical -(90-fghz) -65 to 165 c 1052982-1 note: part numbers are rohs compliant except: l indicates non-rohs compliant.
118 catalog 1307191 dimensions are in millimeters dimensions are shown for usa: 1-800-522-6752 south america: 55-11-2103-6000 revised 3-07 and inches unless otherwise reference purposes only. canada: 1-905-470-4425 hong kong: 852-2735-1628 specified. values in brackets specifications subject mexico: 01-800-733-8926 japan: 81-44-844-8013 www.tycoelectronics.com are standard equivalents. to change. c. america: 52-55-1106-0803 uk: 44-8706-080-208 rf coax connectors sma connectors (continued) panel mount 4 hole flange mount jack receptacle, straight t erminal slot width ref. plane 4 plcs. .250-36 uns-2a 1.3 [.050] 12.7 [.500] sq. 8.6 [.340] typ. 2.6 [.102] 1.3 [.050] 1.7 [.065] 9.5 [.375] 7.6 [.299] ref. body material contact slot width rf leakage temperature part & finish captivation +.076/-.025 db min. range no. [+.003/-.001] stainless, passivated epoxy 0.5 [.018] -(60-fghz) -65 to 125 c 1052563-1 4 hole flange mount plug receptacle, tab terminal 1.7 [.065] 4 plcs. 2.6 [.102] 2.5 [.100] 8.6 [.340] 12.7 [.500] sq. 12.9 [.507] ref. 9.9 [.390] ref. 0.1 [.005] x thk. 1.2 [.050] wide tab typ. body material contact tab rf leakage temperature part & finish captivation width db min. range no. stainless, passivated epoxy 1.3 [.050] -(60-fghz) -65 to 125 c 1052360-1 4 hole flange mount jack receptacle, tab terminal 9.5 [.375] 2.5 [.100] 7.6 [.299] 1.7 [.065] 12.7 [.500] 8.6 [.340] 2.6 [.102] sq. 0.13 [.005] x thk. 0.5 [.020] wide tab 4 plcs. 2 plcs. ref. body material contact tab rf leakage temperature part & finish captivation width db min. range no. stainless, passivated epoxy .51 [.020] -(60-fghz) -65 to 125 c 1052898-1 note: pa rt numbers are rohs compliant except: indicates non-rohs compliant.
119 catalog 1307191 dimensions are in millimeters dimensions are shown for usa: 1-800-522-6752 south america: 55-11-2103-6000 revised 3-07 and inches unless otherwise reference purposes only. canada: 1-905-470-4425 hong kong: 852-2735-1628 specified. values in brackets specifications subject mexico: 01-800-733-8926 japan: 81-44-844-8013 www.tycoelectronics.com are standard equivalents. to change. c. america: 52-55-1106-0803 uk: 44-8706-080-208 rf coax connectors sma connectors (continued) 2 hole flange mount jack receptacle, panel mount, t ab terminal .250-36uns-2a ref. plane 0.13 [.005] x thk. 1.27 [.050] wide tab 7.59 [.299] ref. 1.7 [.065] 9.5 [.375] 2.5 [.100] 2 plcs. 2.6 [.102] 15.9 [.625] 5.7 [.223] 12.2 [.481] body material contact horizontal rf leakage temperature part & finish captivation tab db min. range no. stainless, passivated epoxy -(60-fghz) -65 to 125 c 1052577-1 4 hole flange mount jack receptacle, for microstrip t ransmission line circuits 12.7 [.500] sq. 8.6 [.340] typ. .250-36 uns-2a ref. plane 7.59 [.299] ref. 1.7 [.065] 0.3 [.010] 2.2 [.085] 3.2 [.125] 4.4 [.175] 9.5 [.375] 2.6 [.102] 4 plcs. body material contact rf leakage temperature part & finish captivation db min. range no. stainless, passivated epoxy -(60-fghz) -65 to 125 c 1052528-1 2 hole flange mount jack receptacle, for microstrip t ransmission line circuits 5.7 [.223] 12.2 [.481] 15.9 [.625] 2.6 [.102] 2 plcs. .250-36 uns-2a ref. plane 9.5 [.375] 3.2 [.125] 1.2 [.049] 7.6 [.299] ref. 1.7 [.065] 2.2 [.085] 0.3 [.010] body material contact rf leakage temperature part & finish captivation db min. range no. stainless, passivated epoxy -(60-fghz) -65 to 125 c 1052902-1 note: pa rt numbers are rohs compliant except: indicates non-rohs compliant.
120 catalog 1307191 dimensions are in millimeters dimensions are shown for usa: 1-800-522-6752 south america: 55-11-2103-6000 revised 3-07 and inches unless otherwise reference purposes only. canada: 1-905-470-4425 hong kong: 852-2735-1628 specified. values in brackets specifications subject mexico: 01-800-733-8926 japan: 81-44-844-8013 www.tycoelectronics.com are standard equivalents. to change. c. america: 52-55-1106-0803 uk: 44-8706-080-208 rf coax connectors sma connectors (continued) field replaceable hermetic launchers (continued) 4 hole flange mount jack receptacle with emi/rfi gasket accepts pin dia. a emi gasket .250-36uns-2a ref. plane 4 plcs. 2.6 [.102] 9.5 [.375] 1.7 [.065] 0.1 [.005] ref. 8.6 [.340] 2 plcs. 7.6 [.299] ref. 12.7 [.500] ref. material & finish captivation pin diameter a part no. stainless, passivated mechanical .38 [.015] 1052684-1 4 hole flange mount jack receptacle without emi/rfi gasket 12.7 [.500] 8.6 [.340] 2.6 [.102] 4 plcs. 2 plcs. accepts pin dia. a 9.5 [.375] 7.6 [.299] ref. sq. 1.7 [.065] material & finish captivation pin diameter a part no. stainless, passivated mechanical .91 [.036] 1052643-1 2 hole flange mount jack receptacle with emi/rfi gasket 5.6 [.222] 12.2 [.481] 15.9 [.625] 2.6 [.102] 2 plcs. .250-36 uns-2a emi gasket accepts pin dia. a ref. plane 9.5 [.375] 7.6 [.299] ref. 0.1 [.005] min. 1.7 [.065] material & finish captivation pin diameter a part no. stainless, passivated mechanical .30 [.012] 1052628-1 stainless, passivated mechanical .38 [.015] 1052689-1 stainless, passivated mechanical .46 [.018] 1052634-1 2 hole flange mount jack receptacle without emi/rfi gasket, field replaceable hermetic launchers 9.5 [.375] 7.6 [.299] 2 plcs. accepts pin dia a 1.7 [.065] 5.7 [.223] 12.2 [.481] 15.9 [.625] 2.6 [.102] material & finish captivation pin diameter a part no. stainless, passivated mechanical .51 [.020] 1052652-1 stainless, passivated mechanical .91 [.036] 1052646-1 note: pa rt numbers are rohs compliant except: indicates non-rohs compliant.
121 catalog 1307191 dimensions are in millimeters dimensions are shown for usa: 1-800-522-6752 south america: 55-11-2103-6000 revised 3-07 and inches unless otherwise reference purposes only. canada: 1-905-470-4425 hong kong: 852-2735-1628 specified. values in brackets specifications subject mexico: 01-800-733-8926 japan: 81-44-844-8013 www.tycoelectronics.com are standard equivalents. to change. c. america: 52-55-1106-0803 uk: 44-8706-080-208 rf coax connectors sma connectors (continued) pc board mount right-angle jack ref. plane 11.6 [.458] 5.1 [.200] typ. 2.8 [.110] typ. 9.7 [.382] ref. 0.5 [.020] typ. 6.4 [.250] sq. 1.0 [.040] sq. 4 plcs. 6.35 [.250 ] 0.25 0 13.5 [.530] 3.9 [.155] ref. 1.3 [.050] 15.24 [.600] max. 4.60 [.181] min. dia. max. 9.65 [.380] 3.94 [.155] 11.68 [.460] 1.93 .05 [.076 .002 ] 1.27 .03 [.050 .001 ] 6.35 [.250] dia. 1.02 .05 [.040 .002 ] typ. pc board mount v ertical jack 1.3 [.050] .250-36 uns-2a ref. plane 3.9 [.155] 13.5 [.530] 9.5 [.375] ref. 5.1 [.200] typ. 7.6 [.299] ref. 6.3 [.250] sq. 1.0 [.040] sq. 4 plcs. 6.35 0.13 [.250 .005 ] 6.35 0.13 [.250 .005 ] 1.27 0.03 [.050 .001 ] 9.53 0.13 [.375 .005 ] 19.94 [.785] 12.70 [.500] 12.70 [.500] 5.28 [.203] 0.63 [.025] 3 plcs. material & finish style no. part no. stainless, gold 1 1053354-1 brass, gold 2 221789-1 brass, gold 2 221789-3 brass, nickel plate 3 6274096-1 material & finish style no. part no. stainless, gold 1 1053378-1 stainless, gold 2 221790-1 style 1 5.1 [.200] 2 plcs. 1.7 [.067] 5 plcs. recommended mounting holes style 2 style 3 5.1 [.200] 2 plcs. 1.7 [.067] 5 plcs. recommended mounting holes style 1 style 2 note: pa rt numbers are rohs compliant except: indicates non-rohs compliant.
122 catalog 1307191 dimensions are in millimeters dimensions are shown for usa: 1-800-522-6752 south america: 55-11-2103-6000 revised 3-07 and inches unless otherwise reference purposes only. canada: 1-905-470-4425 hong kong: 852-2735-1628 specified. values in brackets specifications subject mexico: 01-800-733-8926 japan: 81-44-844-8013 www.tycoelectronics.com are standard equivalents. to change. c. america: 52-55-1106-0803 uk: 44-8706-080-208 rf coax connectors sma connectors (continued) in-series adapter, jack to jack ref. plane ref. plane 3.2 [.125] 12.7 [.500] 8.8 [.348] ref. 5.5 [.218] across flats frequency material & finish captivation part no. dc-18.0ghz stainless, gold epoxy* 1053488-1 frequency material & finish captivation part no. dc-18.0ghz stainless, passivated epoxy* 1053635-1 * all adapters listed above employ epoxy captivation. mechanically captivated v ersions are also available. please consult tyco electronics. in-series adapter, plug to plug 5.5 [.218] across flats 7.9 [.312] hex ref. 22.2 [.875] 3.2 [.125] in-series adapter, jack to plug, right-angle 14.8 [.583] 7.9 [.312] hex 15.9 [.625] ref. 12.7 [.500] 11.6 [.458] frequency material & finish captivation part no. dc-12.4ghz stainless, passivated mechanical 1055065-1 in-series adapter, jack to jack, right-angle ref. plane ref. plane 9.7 [.383] ref. 9.7 [.383] ref. 11.7 [.459] 11.7 [.459] .250-36 uns-2a frequency material & finish captivation part no. dc-12.4ghz stainless, passivated mechanical 1055018-1 note: pa rt numbers are rohs compliant except: indicates non-rohs compliant.
123 catalog 1307191 dimensions are in millimeters dimensions are shown for usa: 1-800-522-6752 south america: 55-11-2103-6000 revised 3-07 and inches unless otherwise reference purposes only. canada: 1-905-470-4425 hong kong: 852-2735-1628 specified. values in brackets specifications subject mexico: 01-800-733-8926 japan: 81-44-844-8013 www.tycoelectronics.com are standard equivalents. to change. c. america: 52-55-1106-0803 uk: 44-8706-080-208 rf coax connectors sma connectors (continued) in-series adapter, plug to plug, right-angle ref. plane ref. plane 14.0 [.550] ref. 11.1 [.438] ref. 7.9 [.312] hex. 14.0 [.550] ref. 11.1 [.438] ref. frequency material & finish captivation part no. dc-18.0ghz stainless, passivated mechanical 1055047-1 in-series adapter, jack to plug, connector saver .250-36 uns-2a 13.3 [.524] ref. 7.9 [.312] hex. 18.3 [.720] ref. ref. plane ref. plane 5.6 [.219] across flats frequency material & finish captivation part no. dc-18.0ghz stainless, passivated epoxy 1054426-1 t est adapter, plug to jack, quick release 12.70 [.500] 10.20 [.400] 24.90 [.982] 28.60 [ 1.125 ] 23.00 [.905] 5.50 [.215] ref. ref. ref. reference plane across flats osm jack retaining ring .250-36 uns-2a osm plug reference plane frequency material & finish captivation part no. dc-18.0ghz stainless, passivated epoxy 1053780-1 in-series adapter, jack to jack, bulkhead feedthrough recommended mounting hole 6.4 [.250] min. 6.0 [.235] min. lock washer .250-36 uns-2a .250-36 uns-2a ref. plane ref. plane 9.5 [.375] hex. 14.6 [.575] 18.4 [.723] ref. 22.2 [.875] 1.7 [.065] 7.9 [.312] hex. 6.4 [.250] max panel frequency material & finish captivation part no. dc-18.0ghz stainless, passivated epoxy* 1054869-1 *mechanically captivated version available. please consult tyco electronics. note: pa rt numbers are rohs compliant except: indicates non-rohs compliant.
124 catalog 1307191 dimensions are in millimeters dimensions are shown for usa: 1-800-522-6752 south america: 55-11-2103-6000 revised 3-07 and inches unless otherwise reference purposes only. canada: 1-905-470-4425 hong kong: 852-2735-1628 specified. values in brackets specifications subject mexico: 01-800-733-8926 japan: 81-44-844-8013 www.tycoelectronics.com are standard equivalents. to change. c. america: 52-55-1106-0803 uk: 44-8706-080-208 rf coax connectors qma connectors snap-on sma series of rf connectors product facts positive snap-on interface facilitates assembly intermateable with competitor product excellent rf performance to 6 ghz ideal for communications and industrial applications t yco electronics?next gen- eration high performance rf products qma (snap-on sma) connectors series offers the same high quality and performance currently found in the standard t yco electronics sma series but does not require the coupling nut torque. by integrating a snap-on feature to the design, denser packaging can be achieved, and the overall applied cost is dramatically r educed. the qma connec- tor series is excellent for communications as well as industrial applications. the qma offering is designed for 100 mating cycles, oper- ates through 6 ghz, and is completely intermateable with competitive qma offer- ings. this new qma prod- uct is not intermateable with standard sma interfaces. qma connectors are avail- able in a broad range of standard configurations, including pcb and panel mount, flexible and semi- rigid cable, and adapters. other options can be r eviewed as well, including additional cable sizes, pcb surface mounting, and tape and reel packaging. the qma connector series is a cost effective solution for the challenging demands of todays commercial mar- ketplace, with applications including cellular base sta- tion, handsets, and test and measurement. call your local sales office or author- ized distributor for additional information or samples of the qma connector series. t yco electronics is a lead- ing supplier of rf and microwave connectors and cable assemblies, and pro- vides advanced technology products from well known and industry leading brands, including amp and m/a-com. material and finish shells and bodies ?brass, nickel plated collars ?phosphor bronze, white bronze plated outer contacts ?beryllium copper, nickel plated center contacts ?beryllium copper, gold plated dielectrics ?ptfe electrical characteristics frequency ?dc ?6 ghz nominal impedance ?50 ohms v oltage rating ?335 volts (vrms max.) @ sea level vswr ?1.15 : 1 max. @ 6 ghz insulation resistance ? 5,000 megohms min. insertion loss ?.25 db max @ 6 ghz dielectric withstanding voltage 1000 volts (vrms max.) @ sea level contact resistance ? center contact ?5 milliohms max. outer contact ?4 milliohms max. mechanical characteristics connector durability ? 100 mating cycles force to engage ?27 newtons force to disengage ?20 newtons retention force (mated pair) 60 newtons min. cable retention ?dependent upon cable type environmental characteristics t emperature rating ? -40 to +125? vibration ?eia-364-28, t est condition vii, condition d shock ?eia-364-27, method h moisture resistance ?eia-364-31, method iii thermal shock ?eia-364-32 note: p erformance specifications are typical, but may not apply to all connector types. related product data product specifiation ?108-2087 sample kit ?1654882 qma snap-on interface board sma threaded interface
125 catalog 1307191 dimensions are in millimeters dimensions are shown for usa: 1-800-522-6752 south america: 55-11-2103-6000 revised 3-07 and inches unless otherwise reference purposes only. canada: 1-905-470-4425 hong kong: 852-2735-1628 specified. values in brackets specifications subject mexico: 01-800-733-8926 japan: 81-44-844-8013 www.tycoelectronics.com are standard equivalents. to change. c. america: 52-55-1106-0803 uk: 44-8706-080-208 rf coax connectors qma connectors (continued) semi-rigid cable ? direct solder attachment straight cable plug right-angle cable plug cable part number rg 402 1408346-1 cable part number rg 402 1408347-1 straight cable jack bulkhead cable jack cable part number rg 402 1408348-1 cable part number rg 402 1408349-1 20.50 [0.81] ref. 10.50 [0.41] 18.70 [0.74] ref. 14.60 [0.57] ref. 10.50 [0.41] 5.60 [0.22] 5.60 [0.22] 8.00 [0.31] 10.24 [0.40] 23.05 [0.91] 16.05 [0.63] 7.00 [0.28] 2.00 [0.08] 6.50 [0.26] min. 3.20 [0.13] max. panel 6.46 [0.25] across flat 9.50 [0.38] hex. 9.50 [0.38] hex. 18.05 [0.71] 8.71 [0.34] 15.10 [0.60] ref. 7.20 [0.28] min. recommended mounting hole note: pa rt numbers are rohs compliant except: indicates non-rohs compliant.
126 catalog 1307191 dimensions are in millimeters dimensions are shown for usa: 1-800-522-6752 south america: 55-11-2103-6000 revised 3-07 and inches unless otherwise reference purposes only. canada: 1-905-470-4425 hong kong: 852-2735-1628 specified. values in brackets specifications subject mexico: 01-800-733-8926 japan: 81-44-844-8013 www.tycoelectronics.com are standard equivalents. to change. c. america: 52-55-1106-0803 uk: 44-8706-080-208 rf coax connectors qma connectors (continued) cable dim. a part number rg 174, 22.90 1408333-1 188, 316 0.90 rd 316 22.90 1408333-3 0.90 rg 400 25.20 1408333-5 0.99 rg 58 25.20 1408333-7 0.99 cable dim. a dim. b part number rg 174, 17.20 13.10 1408336-1 188, 316 0.68 0.52 rd 316 17.20 13.10 1408336-3 0.68 0.52 rg 400 19.50 15.40 1408336-5 0.77 0.61 rg 58 19.50 15.40 1408336-7 0.77 0.61 flexible cable ?crimp attachment straight cable plug cable dim. a part number rg 174, 25.90 1408338-1 188, 316 1.02 rd 316 25.90 1408338-3 1.02 rg 400 28.20 1408338-5 1.11 rg 58 28.20 1408338-7 1.11 straight cable jack cable dim. a part number rg 174, 9.90 1408339-1 188, 316 0.39 rd 316 9.90 1408339-3 0.39 rg 400 12.20 1408339-5 0.48 rg 58 12.20 1408339-7 0.48 bulkhead cable jack right-angle cable plug recommended mounting hole 10.50 [0.41] 10.50 [0.41] 5.60 [0.22] 5.60 [0.22] 7.20 [0.28] 8.00 [0.31] 8.71 [0.33] 18.05 [0.71] 16.05 [0.63] 2.00 [0.08] 9.10 [0.36] 18.70 [0.74] ref. 15.10 [0.60] ref. a ref. a ref. ref. plane a ref. a ref. b 9.50 [0.38] hex. 6.46 [0.25] across flat 3.20 [0.13] max. panel 9.50 [0.38] hex. 6.50 [0.26] min. note: pa rt numbers are rohs compliant except: indicates non-rohs compliant.
127 catalog 1307191 dimensions are in millimeters dimensions are shown for usa: 1-800-522-6752 south america: 55-11-2103-6000 revised 3-07 and inches unless otherwise reference purposes only. canada: 1-905-470-4425 hong kong: 852-2735-1628 specified. values in brackets specifications subject mexico: 01-800-733-8926 japan: 81-44-844-8013 www.tycoelectronics.com are standard equivalents. to change. c. america: 52-55-1106-0803 uk: 44-8706-080-208 rf coax connectors qma connectors (continued) printed circuit board straight jack receptacle part number 1408332-1 recommended mounting hole 1.02 [0.04] sq. typ. 1.70 [0.07] ty p. 1.27 [0.05] 5.60 [0.22] 15.10 [0.60] 11.00 [0.43] 5.08 [0.20] ty p. 5.08 [0.20] ty p. 6.35 [0.25] sq. right-angle jack receptacle part number 1408337-1 straight terminal press-in jack recommended mounting hole 1.02 [0.04] sq. typ. 1.70 [0.07] 5 plcs. 5.60 [0.22] dia. 5.08 [0.20] ty p. 5.08 [0.20] ty p. 6.35 [0.25] sq. 12.40 [0.49] 15.60 [0.61] 13.60 [0.54] 9.50 [0.37] 9.95 [.392] 5.00 [.197] 2.00 [.079] 1.20 [.047] 4.00 [.157] 4.50 [.177] 0.75 0.05 [.030 .002 ] 6.83 0.03 [.269 .001 ] body material contact rf leakage temperature part & finish captivation db min. range no. brass, gold mechanical n/a ?5 to 125 c 619215-1 note: part numbers are rohs compliant except: l indicates non-rohs compliant.
128 catalog 1307191 dimensions are in millimeters dimensions are shown for usa: 1-800-522-6752 south america: 55-11-2103-6000 revised 3-07 and inches unless otherwise reference purposes only. canada: 1-905-470-4425 hong kong: 852-2735-1628 specified. values in brackets specifications subject mexico: 01-800-733-8926 japan: 81-44-844-8013 www.tycoelectronics.com are standard equivalents. to change. c. america: 52-55-1106-0803 uk: 44-8706-080-208 rf coax connectors qma connectors (continued) adapters between series qma plug to sma plug part number 1408393-1 30.60 [1.20] ref. 7.90 [0.31] hex. 8.70 [0.34] hex. qma plug sma plug qma jack to sma plug part number 1408343-1 21.50 [0.85] ref. 6.35 [0.25] hex. 7.90 [0.31] hex. sma plug qma jack adapters in series qma plug to qma jack part number 1408342-1 27.70 [1.09] ref. qma plug qma jack straight terminal 4-hole flange mount jack receptacle part number 1408341-1 screw-in front mount jack receptacle part number 1408340-1 2.60 [0.10] 4 plcs. 5.60 [0.22] 8.00 [0.31] hex. 17.90 [0.70] 15.00 [0.60] 1.53 [0.06] 13.55 [0.53] .250 - 36 uns-24 12.70 [0.50] sq. 8.64 [0.34] ty p. 4.06 [0.16] 1.27 [0.05] 5.60 [0.22] 1.27 [0.05] 4.06 [0.16] 4.10 [0.16] 1.90 [0.07] 1.50 [0.59] 10.70 [0.42] 20.00 [0.79] note: pa rt numbers are rohs compliant except: indicates non-rohs compliant.
129 catalog 1307191 dimensions are in millimeters dimensions are shown for usa: 1-800-522-6752 south america: 55-11-2103-6000 revised 3-07 and inches unless otherwise reference purposes only. canada: 1-905-470-4425 hong kong: 852-2735-1628 specified. values in brackets specifications subject mexico: 01-800-733-8926 japan: 81-44-844-8013 www.tycoelectronics.com are standard equivalents. to change. c. america: 52-55-1106-0803 uk: 44-8706-080-208 series 1.0/2.3 (50 ohm/75 ohm) rf coax connectors miniature coaxial connec- tors series 1.0/2.3 (cecc 22230 and iec 61169-29) coaxial connectors are devised to meet the r equirements of compact electronic instrumentation. all plugs and jacks with z o = 50 ? are designed for a number of different 50 ? and 75 ? cables. owing to the large demand, the series 1.0/2.3 has also been optimized as a 75 ? design into the ghz range. the different types of coupling mechanisms, such as screw on, slide-in and latching coupling permit space-saving installation. in addition, an extensive range of measurement accessories, adapters as well as terminations is available. the quality- determining factors have been established on the basis of corresponding measurements and test procedures in accordance with national and interna- tional standards for rf connectors (iec 61169-1, mil-c-39012 etc.). high-quality materials ensure high reliability even in industrial atmospheres. the contact principle is the pin-socket principle and the contacts are gold plated to ensure perfect contact mat- ing. the inner conductor parts are held in ptfe (polytetrafluoroethylene). the reduced dimensions of all component parts of these connectors permit a com- pact hole spacing (installa- tion pitch) of 6.8 [0.27] depending upon the corre- sponding cable diameters. the cable is connected by crimping the cable braid to the plug or jack body, the inner conductor is soldered or crimped. in most applications, the plug and jack belong to the same coupling type group. in special instances, such as for measurement pur- poses, different coupling types can be used together. between series adapters for series 1.0/2.3 adapters please see pages 251-260.
130 catalog 1307191 dimensions are in millimeters dimensions are shown for usa: 1-800-522-6752 south america: 55-11-2103-6000 revised 3-07 and inches unless otherwise reference purposes only. canada: 1-905-470-4425 hong kong: 852-2735-1628 specified. values in brackets specifications subject mexico: 01-800-733-8926 japan: 81-44-844-8013 www.tycoelectronics.com are standard equivalents. to change. c. america: 52-55-1106-0803 uk: 44-8706-080-208 series 1.0/2.3 (50 ohm/75 ohm) (continued) rf coax connectors t echnical data electrical and mechanical characteristics in accordance with cecc 22230 characteristic impedance ? 50 ? /75 ? frequency range ?up to 10 ghz/ 2 ghz reflection factor, referred to 50 ? cable 1 ? up to 1 ghz, r 0.05 up to 4 ghz, r 0.07 up to 10 ghz, r 0.15 reflection factor, referred to 75 ? cable 1 ? up to 2 ghz, r 0.10 insulation resistance ? initial value 1 g ? after stressing 200 m ? screening effectiveness 2 ? 90 db inner conductor contact resistance ?after stressing 10 m ? outer conductor continuity ? after stressing 7.5 m ? v oltage proof 3 ? flexible cables (rg 316) ?at sea level, 750 v, 50 hz ?at 20 km altitude, 150 v, 50 hz w orking voltage 3 ? flexible cables (rg 316) ?at sea level, 350 v, 50 hz ?at 20 km altitude, 65 v, 50 hz service life ?500 cycles climatic category ?40/85/21 notes: 1 guide values, depending on cable type and connector style. 2 v alues apply to a straight screw and latching coupling with suitable cable. 3 some cables suitable for use with these connectors have lower char- acteristic values than specified here. 4 f or applicable cable types see page 151. coupling types t ype a screw coupling; version with union nut this type permits the plug and jack to be screwed together manually by means of a union nut secured to the plug. this is necessary for readily accessible locations, front panel test points and cable connections. t ype c slide-in coupling; version with centering ferrule in this type of coupling, the plug features a guide ferrule with a conical entry surface. this ensures that the float- able bulkhead plugs with cable connection make a r eliable electrical connec- tion to the rigid installed jack. examples of this are single and multi-contact connections of slide-in applications. ??denotes the allowed spacing of the mounting panel for satisfac- tory contact when the con- nection is made. t ype f latching coupling (quick lock) in this version, the cable plugs bear a funnel ferrule with built-in spring which snaps into a groove on the jack, simultaneously locking the connection. the connec- tion can be easily separated by lightly pulling the outer sleeve of the plug. this type of coupling can be used with a higher packing den- sity, as the screw coupling.
131 catalog 1307191 dimensions are in millimeters dimensions are shown for usa: 1-800-522-6752 south america: 55-11-2103-6000 revised 3-07 and inches unless otherwise reference purposes only. canada: 1-905-470-4425 hong kong: 852-2735-1628 specified. values in brackets specifications subject mexico: 01-800-733-8926 japan: 81-44-844-8013 www.tycoelectronics.com are standard equivalents. to change. c. america: 52-55-1106-0803 uk: 44-8706-080-208 series 1.0/2.3, 50 ohm rf coax connectors 18.0 [0.71] 6.5 [0.26] 1) cable coupling type max. part no. rg 316 a 2.67 1393670-1 0.105 plugs, solder/crimp 1) detent for jack 24.64 [.970] 7.70 [.303] 6.20 [.244] 3.10 [.122] cable coupling type max. part no. wp93385l2 f 2.67 619223-1 0.105 24.64 [.970] 7.70 [.303] 6.20 [.244] 3.10 [.122] cable coupling type max. part no. lmr 240 f 2.67 619224-1 0.105 28.50 [1.122] 7.90 [.311] max. max. 7.90 [.311] 4.15 [.163] cable coupling type max. part no. lmr 240fr f 6.3 1460010-1 0.248 25.50 [1.004] max. max. 7.90 [.311] 6.20 [.244] 3.10 [.122] cable coupling type max. part no. wp93385l2 f 6.3 619085-1 0.248 note: pa rt numbers are rohs compliant except: indicates non-rohs compliant.
132 catalog 1307191 dimensions are in millimeters dimensions are shown for usa: 1-800-522-6752 south america: 55-11-2103-6000 revised 3-07 and inches unless otherwise reference purposes only. canada: 1-905-470-4425 hong kong: 852-2735-1628 specified. values in brackets specifications subject mexico: 01-800-733-8926 japan: 81-44-844-8013 www.tycoelectronics.com are standard equivalents. to change. c. america: 52-55-1106-0803 uk: 44-8706-080-208 series 1.0/2.3, 50 ohm (continued) rf coax connectors 17.0 [0.67] 4.1 [0.16] 1.7 [0.07] 3.6 [0.14] cable coupling type max. part no. rg 316 a, c, f 2.6 4-1393670-4 0.10 bulkhead jack, solder/crimp 8.0 [0.31] 4.1 [0.16] 8.4 [0.33] 0.6 1.5 [0.02]...[0.06] 7.3 [0.29] mounting panel ecn0867 coupling type part no. c, f 1393670-8 bulkhead solder jack 5.08 [0.2] 0.9 [0.04] a 11.1 [0.44] 0.95 [0.04] 0.5 [0.02] 4.1 [0.16] 6.0 [0.24] coupling dim part t ype a no. c, f 14.6 3-1393670-4 0.57 c, f 15.6 3-1393670-5 0.61 v ertical pc board mount jack recommended mounting holes pitch 2.54 [0.10] 1.5 [0.06] 0.9 [0.04] 0.95 [0.04] 5.08 [0.2] 12.0 [0.47] 19.5 [0.77] 16.0 [0.63] 0.5 [0.02] m5.5x0.5 [0.22]x[0.02] 6.0 [0.24] coupling type part no. a, c, f 3-1393670-6 v ertical pc board mount bulkhead jack recommended mounting holes pitch 2.54 [0.10] 1.5 [0.06] note: pa rt numbers are rohs compliant except: indicates non-rohs compliant.
133 catalog 1307191 dimensions are in millimeters dimensions are shown for usa: 1-800-522-6752 south america: 55-11-2103-6000 revised 3-07 and inches unless otherwise reference purposes only. canada: 1-905-470-4425 hong kong: 852-2735-1628 specified. values in brackets specifications subject mexico: 01-800-733-8926 japan: 81-44-844-8013 www.tycoelectronics.com are standard equivalents. to change. c. america: 52-55-1106-0803 uk: 44-8706-080-208 series 1.0/2.3, 50 ohm (continued) 15.9 [0.63] m5.5x0.5 [0.22]x[0.02] 4.1 [0.16] 5.9 [0.23] 7.0 [0.28] 3.3 [0.13] 7.4 [0.29] 3.7 [0.15] 3.6 [0.14] 0.55 [0.02] 0.55 [0.02] ecn0870-g inner conductor coupling type part no. a, c, f 3-1393670-9 right-angle pc board mount bulkhead jack 7.3 [0.29] 1.0 [0.04] recommended mounting holes pitch 2.54 [0.10] 15.00 [.591] 5.28 [.208] 4 plcs. center contact compliant pin 4 plcs. 6.10 [.240] 5.20 [.205] coupling type part no. c, f 6274431-1 v ertical pc board mount action pin jack 5.08 [.200] 5.08 [.200] 1.47 0.08 [.058 .003 ] 4 plcs. 1.00 0.08 [.039 .003 ] recommended mounting holes 10.37 0.08 [.408 .003 ] 3.05 [.120] m5.5 x 0.5 thread 3.18 0.05 [.125 .002 ] 2.79 0.25 [.110 .010 ] 5.52 0.038 [.217 .001 ] over knurl 1.27 0.013 [.050 .0005 ] 7.62 0.05 [.300 .002 ] coupling type part no. a, c, f 1274449-1 panel mount, press-in, launcher jack 23.35 [.919] recommended mountin g holes 13.35 [.526] 5.08 [.200] 5.08 [.200] 6.00 [.236] 6.45 [.254] m5.5 x 0.5 9.00 [.354] 1.00 [.039] 5 plcs. coupling type part no. a, c, f 619107-1 12.95 0.08 [.510 .003 ] 2.59 0.06 [.102 .002 ] m5.5 x 0.5 thread 4 plcs. 12.70 [.500] sq. 17.91 [.705] 14.99 [.590] 1.65 [.065] 1.27 0.03 [.050 .001 ] 8.64 [.340] 4.32 [.170] coupling type part no. a, c, f 1274520-1 panel mount, 4-hole flange, launcher jack 12.10 [.476] 0.80 [.032] m5.5 x 0.5 thread 18.00 0.50 [.710 .020 ] 15.00 0.25 [.591 .010 ] 4.06 [.160] 1.27 [.050] 5.00 [.197] coupling type part no. a, c, f 1274594-1 front mount, bulkhead jack rf coax connectors note: pa rt numbers are rohs compliant except: indicates non-rohs compliant.
134 catalog 1307191 dimensions are in millimeters dimensions are shown for usa: 1-800-522-6752 south america: 55-11-2103-6000 revised 3-07 and inches unless otherwise reference purposes only. canada: 1-905-470-4425 hong kong: 852-2735-1628 specified. values in brackets specifications subject mexico: 01-800-733-8926 japan: 81-44-844-8013 www.tycoelectronics.com are standard equivalents. to change. c. america: 52-55-1106-0803 uk: 44-8706-080-208 rf coax connectors series 1.0/2.3, 50 ohm (continued) series 1.0/2.3, 75 ohm right-angle pc board mount bulkhead jack 20.54 0.15 [.809 .006 ] 17.04 0.15 [.671 .006 ] 7.40 [.291] 1.15 [.045] 7.34 [.289] min. 3.70 [.146] 3.00 [.118] 5.63 [.222] 6.45 [.254] coupling type part no. a, c, f 1274544-1 a, c, f 1460060-1 18.0 [0.71] 6.5 [0.26] 1) cable coupling type max. part no. rg 179 a 2.67 5-1393670-5 0.105 plugs, solder/crimp 1) detent for jack 26 [1.02] 7.9 [0.03] cable coupling type max. part no. rg 179 f 2.67 6-1393670-2 0.105 st 212 f 3.2 6-1393670-5 0.13 02y(st)cy f 3.6 6-1393670-4 0.45/2.0 0.14 pa rt number 1274544-1 19.40 0.15 [.764 .006 ] 15.90 0.15 [.626 .006 ] 7.00 [.276] 6.00 [.236] 3.70 [.146] 3.00 [.118] 11.40 [.449] 6.45 [.254] pa rt number 1460060-1 15.90 [.626] 3.60 [.142] 0.55 [.022] 7.00 [.276] 3.70 [.146] 3.30 [ .130 ] m5.5 x 0.5 coupling type part no. a, c, f 1460139-1 recommended mounting holes pitch 2.54 [0.10] 1.0 [0.04] plating outer body ?silver outer and center conductor gold 7.3 [0.29] 1.0 [0.04] recommended mounting holes pitch 2.54 [0.10] note: pa rt numbers are rohs compliant except: indicates non-rohs compliant.
135 catalog 1307191 dimensions are in millimeters dimensions are shown for usa: 1-800-522-6752 south america: 55-11-2103-6000 revised 3-07 and inches unless otherwise reference purposes only. canada: 1-905-470-4425 hong kong: 852-2735-1628 specified. values in brackets specifications subject mexico: 01-800-733-8926 japan: 81-44-844-8013 www.tycoelectronics.com are standard equivalents. to change. c. america: 52-55-1106-0803 uk: 44-8706-080-208 series 1.0/2.3, 75 ohm (continued) rf coax connectors 4.1 [0.16] 13.5 [0.53] 12.0 [0.47] 0.6 1.5 [0.02]...[0.06] 6.6 [0.26] ecn0857-p mounting panel cable coupling type max. part no. rg 179 a, c, f 2.67 8-1393670-0 0.105 bulkhead jack, solder/crimp 22.5 [0.89] 4.1 [0.16] 15.7 [0.62] 7.9 [0.31] 6.5 [0.26] cable coupling type max. part no. rg 179 f 2.67 2-1393670-6 0.105 02y(st)cy f 3.6 7-1393670-0 0.45/2.0 0.14 right-angle plug, solder/crimp 29.70 [1.169] 4.45 0.05 [.175 .002 ] ref. 26.00 [1.024] 7.80 [.307] ref. 0.64 0.010 [.025 .0004 ] cable coupling type max. part no. belden a, c, f 2.67 619226-1 1855a 0.105 straight plugs, solder/crimp 37.00 [ 1.457 ] 7.60 [.299] max. 12.00 [.472] max. 1.00 0.10 [.039 .004 ] 5.40 [.213] 7.30 [.287] 2.10 [.083] ref. plane 7.85 [.309] cable coupling type max. part no. bt 3002 a, c, f 2.67 1460815-1 0.105 23.00 [.906] max. 16.00 [.630] ref. 8.30 [.327 ] max. cable coupling type max. part no. rg 316 f 2.8 619228-1 0.110 23.00 [.906] 23.00 [.906] max. max. 3.05 [.120] 6.10 [ .240 ] 7.90 [.311] max. cable coupling type max. part no. ra 7000 a, c, f 2.67 1460817-1 0.105 note: pa rt numbers are rohs compliant except: indicates non-rohs compliant. belden is a trademark of belden wire and cable company.
136 catalog 1307191 dimensions are in millimeters dimensions are shown for usa: 1-800-522-6752 south america: 55-11-2103-6000 revised 3-07 and inches unless otherwise reference purposes only. canada: 1-905-470-4425 hong kong: 852-2735-1628 specified. values in brackets specifications subject mexico: 01-800-733-8926 japan: 81-44-844-8013 www.tycoelectronics.com are standard equivalents. to change. c. america: 52-55-1106-0803 uk: 44-8706-080-208 rf coax connectors series 1.0/2.3, 75 ohm (continued) 0.9 [0.04] 0.95 [0.04] 5.08 [0.2] 12.0 [0.48] 21.0 [0.83] 17.5 [0.69] 0.5 [0.02] m5.5x0.5 [0.22]x[0.02] 6.0 [0.24] 7.3 [0.29] coupling type part no. a, c, f 8-1393670-3 v ertical pc board mount bulkhead jack recommended mounting holes pitch 2.54 [0.10] 1.5 [0.06] 23.35 [.919] recommended mountin g holes 13.35 [.526] 5.08 [.200] 5.08 [.200] 6.00 [.236] 6.45 [.254] m5.5 x 0.5 9.00 [.354] 1.00 [.039] 5 plcs. coupling type part no. a, c, f 619106-1 v ertical pc board mount bulkhead jack 16.8 [0.66] 4.1 [0.16] 13.4 [0.53] 3.6 [0.14] 12.7 [0.5] 7.3 [0.29] cable coupling type max. part no. rg 179, 316 a, c, f 2.67 3-1393670-2 0.105 right-angle bulkhead jack, solder/crimp pc board mount bulkhead jack 22.30 [.878] 0.50 [.020] 4.80 0.12 [.189 .005 ] 12.00 [.472] 5.80 [.228] min. 6.50 [.256] 2.30 [.091] 0.20 [.008] min. sq. 7.30 [.287] m5.5 x 0.5 [.020] 5.08 [.200] 3.00 [.118] 0.95 [.037] 0.90 [.035] coupling type max. part no. a, c, f 1.00-2.30 619220-1 .039-.091 recommended mounting holes pitch 2.54 [0.10] 1.5 [0.06] note: pa rt numbers are rohs compliant except: indicates non-rohs compliant.
137 catalog 1307191 dimensions are in millimeters dimensions are shown for usa: 1-800-522-6752 south america: 55-11-2103-6000 revised 3-07 and inches unless otherwise reference purposes only. canada: 1-905-470-4425 hong kong: 852-2735-1628 specified. values in brackets specifications subject mexico: 01-800-733-8926 japan: 81-44-844-8013 www.tycoelectronics.com are standard equivalents. to change. c. america: 52-55-1106-0803 uk: 44-8706-080-208 series 1.0/2.3, 75 ohm (continued) rf coax connectors accessories for 50 ohm and 75 ohm 0.8 [0.03] 2.1 [0.08] 5.0 [0.20] 2.4 [0.09] 4.8 [0.19] 3.5 [0.14] part no. 2-1393562-2 f or cable size similar to rg 179 and rg 316 soldering aid (sleeve) for jack 1393670-8 with solder connection. ecn0900-7 + 0.00 ?0.50 + .000 ?0.02 3.5 [0.14 ] + 0.00 ?0.50 + .000 ?0.02 5.5 [0.22 ] + 0.00 ?0.50 + .000 ?0.02 8.5 [0.33 ] installation example: ecn0901-f sleeve pushed onto shielding braid tin-soldered no. of ports coupling type part no. 2 a, c, f 1274714-3 3 a, c, f 1274714-2 4 a, c, f 1274714-1 straight pcb jacks, multi-port 19.00 [.748] 23.10 [.307] 4.00 [.157] 11.00 [.433] 2 plcs. 8.00 [.315] 5.00 [.197] 10.00 [.394] 6.00 [.236] 10.00 [.394] 29.00 [1.142] 23.10 [.307] 4.00 [.157] 11.00 [.433] 3 plcs. 8.00 [.315] 15.00 [.591] 10.00 [.394] 6.00 [.236] 20.00 [.787] 39.00 [1.535] 23.1 0 [.307] 4.00 [.157] 11.00 [.433] 4 plcs. 8.00 [.315] 15.00 [.591] 10.00 [.394] 6.00 [.236] pa rt number 1274714-3 pa rt number 1274714-2 pa rt number 1274714-1 5.00 [.197] typ. 10.00 [.394] typ. 2.20 [.087] 4 plcs. 1.80 [.071] 4.20 0.05 [.165 .002 ] 8.00 0.05 [.315 .002 ] 2 plcs. 4 plcs. 1.53 [.060] r 0.765 [.030] 2 plcs. recommended pc board layout 2 positions shown 10.00 [.394] typ. note :f or more accessories, see page 147. note: pa rt numbers are rohs compliant except: indicates non-rohs compliant.
138 catalog 1307191 dimensions are in millimeters dimensions are shown for usa: 1-800-522-6752 south america: 55-11-2103-6000 revised 3-07 and inches unless otherwise reference purposes only. canada: 1-905-470-4425 hong kong: 852-2735-1628 specified. values in brackets specifications subject mexico: 01-800-733-8926 japan: 81-44-844-8013 www.tycoelectronics.com are standard equivalents. to change. c. america: 52-55-1106-0803 uk: 44-8706-080-208 rf coax connectors series 1.6/5.6 ms (75 ohm) general the series 1.6/5.6 ms con- nectors have been modified to incorporate improved technical advantages. t ransmission values have been greatly improved while maintaining the proven positive characteris- tics of the previous genera- tions. all types of this new ?hird generation?series 1.6/5.6 ms connectors are connection-compatible with their predecessor. t odays pcm technology demands place the series 1.6/5.6 ms connectors as a most suitable component for transmission of high bit rates. connectors are available in straight and angled ver- sions as well as with differ- ent mechanisms for screw (type a), snap-on (type b), slide-in (type c), and latch- ing (type f) coupling. all connectors of different cou- pling mechanisms are com- patible with each other. the connectors are designed according to the pin-socket principle. the contacts are partially gold- plated, ensuring long serv- ice life and stable contact r esistance for a high num- ber of intermateability cycles. the inner conductor parts are secured so that they cannot be displaced. the insulating parts are made of peek (polyetheretherke- tone) or pc (polycarbonate). the scope of delivery. the connectors are character- ized by high mechanical strength and low space r equirement. connection possibilities exist for a number of differ- ent cables, including highly-flexible cable types (with foam insulation) with low attenuation or small diameter. terminations and adapters (see also meas- urement accessories) round out the spectrum. the cable inner conductors are soldered on, while the outer conductors are screwed or crimped on. also, cable clamp which is independent of the braid clamping secures the con- nection point against tensile stressing for both methods of connection. in addition, assembly- friendly connectors with full crimp and idc (insulation displacement contact) con- nection are included within 9.2 [0.36] m9x0.5 [0.35]x[0.02] 5.6 [0.22] 1.0 [0.03] 4.1 [0.16] 5.5 [0.22] 6.5 [0.26] 9.7 [0.38] m9x0.5 [0.35]x[0.02] 6.7 [0.26] 8.25 [0.32] 2.5 [0.10] 6.6 [0.26] 0.25 [0.01] 7.0 [0.28] plug jack ecn0934-r between series adapters for series 1.6/5.6 adapters please see pages 253-262.
139 catalog 1307191 dimensions are in millimeters dimensions are shown for usa: 1-800-522-6752 south america: 55-11-2103-6000 revised 3-07 and inches unless otherwise reference purposes only. canada: 1-905-470-4425 hong kong: 852-2735-1628 specified. values in brackets specifications subject mexico: 01-800-733-8926 japan: 81-44-844-8013 www.tycoelectronics.com are standard equivalents. to change. c. america: 52-55-1106-0803 uk: 44-8706-080-208 rf coax connectors series 1.6/5.6 ms (75 ohm) (continued) t echnical data electrical and mechanical characteristics in accordance with cecc 22240 characteristic impedance ?75 ? frequency range ?up to 8 ghz reflection factor 1 , referred to ? flexible cables, straight types up to 1 ghz, r 0.02 up to 4 ghz, r 0.06 up to 8 ghz, r 0.10 flexible cables, angled types up to 1 ghz, r 0.04 up to 2 ghz, r 0.06 up to 4 ghz, r 0.10 insulation resistance ? initial value, 10 g ? after stressing, 1 g ? screening effectiveness ? (straight screw connector at 1 ghz) 100 db inner conductor contact resistance ?after stressing 8 m ? outer conductor continuity ?after stressing 4 m ? v oltage proof 2 ? flexible cables (rg 59) ? at sea level, 1.5 kv, 50 hz at 20 km altitude, 300 v, 50 hz w orking voltage 2 ? flexible cables (rg 59) ? at sea level, 500 v, 50 hz at 20 km altitude, 125 v, 50 hz service life ?500 cycles climactic category ?40/85/21 notes: 1 guideline values, depending on cable type and connector style. 2 some cable types suitable for use with these connectors have lower characteristic values than specified here. 3 f or applicable cable types see page 151. coupling types t ype a screw coupling; version with union nut this type permits the plug and jack to be screwed together manually by means of a union nut secured to the plug manually, thus pre- venting the coupling from being pulled apart. this is necessary for readily acces- sible locations, front panel test points and cable con- nections. t ype b snap-on coupling (push-pull) connectors of this type offer fast make/break. they can be used for test and mainte- nance applications and also if there is lack of space and connectors with screw cou- pling cannot be used. t ype c slide-in coupling; version with centering ferrule in this type of coupling, the plug features a guide ferrule with a conical entry surface. this ensures that the float- able bulkhead plugs with cable connection make a r eliable electrical connec- tion to the rigid installed jack. examples of this are single and multi-contact connections of slide-in applications. ??denotes the allowed spacing of the mounting panel for satisfac- tory contact when the con- nection is made. t ype f latching coupling (quick lock) in this version, the cable plugs bear a funnel ferrule with built-in spring which snaps into a groove on the jack, simultaneously locking the connection. the connec- tion can be easily separated by lightly pulling the outer sleeve of the plug. this type of coupling provides the same amount of axial tensile strength as the screw cou- pling, but can be used with a higher packing density.
140 catalog 1307191 dimensions are in millimeters dimensions are shown for usa: 1-800-522-6752 south america: 55-11-2103-6000 revised 3-07 and inches unless otherwise reference purposes only. canada: 1-905-470-4425 hong kong: 852-2735-1628 specified. values in brackets specifications subject mexico: 01-800-733-8926 japan: 81-44-844-8013 www.tycoelectronics.com are standard equivalents. to change. c. america: 52-55-1106-0803 uk: 44-8706-080-208 rf coax connectors series 1.6/5.6 ms (75 ohm) (continued) 10.8 [0.43] 37.0 [1.46] 10.8 [0.43] cable coupling type max. part no. 2yccy a 7.8 1393682-1 0.7/4.4 0.31 plugs, solder/clamp plugs, solder/crimp 12.8 [0.50] 37.0 [1.46] 10.8 [0.43] cable coupling type max. part no. 2yccy 1.0/6.5 a 9.8 1393682-2 2yc(ms)cy 1.0/6.5 0.31 10.8 [0.43] 11.5 [0.45] 30.2 [1.19] cable coupling type max. part no. 02y(st)cy 0.45/2.0 f 3.6 1393681-8 0.14 10.8 [0.43] a 10.8 [0.43] cable coupling dim. max. part no. t ype a 2ycy 0.4/2.5 a 30.7 4.1 1-1393682-1 1.21 0.16 2yccy 0.4/2.5 a 30.7 4.8 1.21 0.19 1-1393682-2 2yc(ms)cy 0.4/2.5 a 30.7 5.0 1.21 0.20 2ycy 0.7/4.4 a 32.9 6.1 1.30 0.24 rg 59 a 32.9 6.25 1-1393682-3 1.30 0.25 2yc(ms)cy 0.5/3.0 a 32.9 6.2 1.30 0.24 10.8 [0.43] 10.8 [0.43] a cable coupling dim. max. part no. t ype a rg 179 a 32.5 2.6 1393680-2 1.28 0.105 2yccy 0.4/2.5 a 32.5 4.8 1.28 0.19 1393680-3 2yc(ms)cy 0.4/2.5 a 35.5 5.0 1.40 0.20 2yc(ms)cy 0.5/3.0 a 35.5 6.2 1393680-4 1.40 0.24 2ycy 0.7/4.4 a 35.5 6.1 1393680-5 1.40 0.24 02y(st)cy 0.45/2.0 a 32.5 3.6 1393680-9 1.28 0.14 note: pa rt numbers are rohs compliant except: indicates non-rohs compliant.
141 catalog 1307191 dimensions are in millimeters dimensions are shown for usa: 1-800-522-6752 south america: 55-11-2103-6000 revised 3-07 and inches unless otherwise reference purposes only. canada: 1-905-470-4425 hong kong: 852-2735-1628 specified. values in brackets specifications subject mexico: 01-800-733-8926 japan: 81-44-844-8013 www.tycoelectronics.com are standard equivalents. to change. c. america: 52-55-1106-0803 uk: 44-8706-080-208 rf coax connectors 10.8 [0.43] 11.5 [0.45] 32.0 [1.26] v ersion with preassembled insulation cable coupling type max. part no. 02y(st)cy 0.45/2.0 f 3.6 1393672-3 0.14 10.8 [0.43] 11.5 [0.45] 32.0 [1.26] preassembled isolation parts cable coupling type max. part no. 02y(st)cy 0.45/2.0 f 3.6 1393672-9 0.14 35.00 [1.378] 11.80 [.465] 3.80 [.150] 1.30 [ .051 ] min. preassembled version cable coupling type max. part no. 02ys(st)chh 0.25/1.2 f 2.9 1460132-1 0.11 series 1.6/5.6 ms (75 ohm) plugs, solder/crimp (continued) 24.7 [0.97] 10.8 [0.43] 10.8 [0.43] 18.2 [0.72] cable coupling type max. part no. rg 179 a 2.67 2-1393682-3 0.105 24.2 [0.95] 11.5 [0.45] 10.8 [0.43] 13.0 [0.51] cable coupling type max. part no. 02y(st)cy 0.45/2.0 f 3.6 1-1393681-0 0.14 right-angle plugs, solder/crimp 24.7 [0.97] 10.8 [0.43] a 10.8 [0.43] cable coupling dim. max. part no. t ype a 2yccy 0.4/2.5 a 13.0 4.8 0.51 0.19 2-1393682-0 2yc(ms)cy 0.4/2.5 a 13.0 5.0 0.51 0.20 2ycy 0.7/4.4 a 15.8 6.1 0.62 0.24 rg 59 a 15.8 6.25 2-1393682-2 0.62 0.25 2yc(ms)cy 0.5/3.0 a 15.8 6.2 0.62 0.24 note: pa rt numbers are rohs compliant except: indicates non-rohs compliant.
142 catalog 1307191 dimensions are in millimeters dimensions are shown for usa: 1-800-522-6752 south america: 55-11-2103-6000 revised 3-07 and inches unless otherwise reference purposes only. canada: 1-905-470-4425 hong kong: 852-2735-1628 specified. values in brackets specifications subject mexico: 01-800-733-8926 japan: 81-44-844-8013 www.tycoelectronics.com are standard equivalents. to change. c. america: 52-55-1106-0803 uk: 44-8706-080-208 rf coax connectors series 1.6/5.6 ms (75 ohm) (continued) right-angle plugs, solder/crimp 24.7 [0.97] 10.8 [0.43] a cable coupling dim. max. part no. t ype a 02y12yc(ms)c6y a 15.0 4.0 1-1393680-6 0.45/2.0 0.59 0.16 02y(st)cy 0.45/2.0 a 15.0 3.6 1-1393680-8 0.59 0.14 right-angle plugs, idc connection 24.7 [0.97] idc connection 17.5 [0.69] 10.8 [0.43] ecn1615-7 cable coupling type max. part no. 02y(st)cy 0.45/2.0 a 3.6 1393757-9 0.14 2ycy 0.4/2.5 a 4.1 1393757-8 0.16 right-angle plug, solder/crimp 25.0 [0.98] ecn0976-2 15.0 [0.59] 11.5 [0.45] crimp connection cable coupling type max. part no. 02y(st)cy 0.45/2.0 f 3.6 1393672-5 0.14 bulkhead jacks, solder/clamp 10.8 [0.43] 10.8 [0.43] a m9.0x0.5 [0.35]x[0.02] 8.2 [0.32] mounting panel 14.3 [0.56] max. 2.0 [0.08] max. cable coupling dim. max. part no. t ype a 2ycy 0.4/2.5 a, b, f 28.1 4.1 3-1393682-2 1.11 0.16 2yccy 0.4/2.5 a, b, f 28.1 4.8 1.11 0.19 3-1393682-3 2yc(ms)cy 0.4/2.5 a, b, f 28.1 5.0 1.11 0.20 2ycy 0.7/4.4 a, b, f 30.4 6.1 1.20 0.24 rg 59 a, b, f 30.4 6.25 3-1393682-5 1.20 0.25 2yc(ms)cy 0.5/3.0 a, b, f 30.4 6.2 1.20 0.24 note: pa rt numbers are rohs compliant except: indicates non-rohs compliant.
143 catalog 1307191 dimensions are in millimeters dimensions are shown for usa: 1-800-522-6752 south america: 55-11-2103-6000 revised 3-07 and inches unless otherwise reference purposes only. canada: 1-905-470-4425 hong kong: 852-2735-1628 specified. values in brackets specifications subject mexico: 01-800-733-8926 japan: 81-44-844-8013 www.tycoelectronics.com are standard equivalents. to change. c. america: 52-55-1106-0803 uk: 44-8706-080-208 rf coax connectors series 1.6/5.6 ms (75 ohm) (continued) 10.8 [0.43] 10.8 [0.43] 32.5 [1.28] m9.0x0.5 [0.35]x[0.02] 8.2 [0.32] 10.6 [0.42] 2.5 [0.10] max. mounting panel cable coupling type max. part no. rg 179 b, c, f 2.67 4-1393682-2 0.105 12.0 [0.47] 8.0 [0.31] 10.8 [0.43] 8.2 [0.32] 0.6 [0.02] mounting panel 19.4 [0.76] 6.5 [0.26] 3.0 [0.12] max. ecn0984-s m9.0x0.5 [0.35]x[0.02] coupling part t ype no. a, b, c, f 1-1393681-3 12.8 [0.50] 10.8 [0.43] 34.5 [1.36] m9.0x0.5 [0.35]x[0.02] 8.2 [0.32] 14.3 [0.56] max. 2.0 [0.08] max. mounting panel ecn0944-y cable coupling type max. part no. 2yccy 1.0/6.5 a, b, f 9.8 0.38 1393682-4 2yc(ms)cy 1.0/6.5 a, b, f 9.8 0.38 a 12.0 [0.47] 1.7 [0.07] 10.8 [0.43] 8.2 [0.32] ecn0982-b mounting panel 19.4 [0.76] 3.0 [0.12] max. m9.0x0.5 [0.35]x[0.02] dim. a max. part no. 22.3* a, b, c, f 1-1393681-1 0.88 23.5 a, b, c, f 1-1393681-9 0.93 * without soldering tags on outer conductor, dimension a up to inner conductor end. bulkhead jacks, solder/clamp (continued) bulkhead jacks, solder/crimp 10.8 [0.43] 10.8 [0.43] 29.8 [1.17] m9.0x0.5 [0.35]x[0.02] 8.2 [0.32] 14.3 [0.56] max. 2.0 [0.08] max. mounting panel ecn0947 n cable coupling type max. part no. rg 179 a, b, f 2.67 2-1393680-2 0.105 02y12yc(ms)c6y a, b, f 4.0 2-1393680-4 0.45/2.0 0.16 06ycc(st)6y 0.4/1.6 a, b, f 3.3 2-1393680-5 0.13 02y(st)cy 0.45/2.0 a, b, f 3.6 0- 1393672-6 0.14 with preassembled insulation parts cable coupling type max. part no. 02y(st)cy 0.45/2.0 a, b, f 3.6 0- 1-1393672-4 0.14 bulkhead jacks, solder 10.8 [0.43] 10.8 [0.43] 29.8 [1.17] m9.0x0.5 [0.35]x[0.02] 8.2 [0.32] 2.0 [0.08] max. mounting panel crimp connection note: pa rt numbers are rohs compliant except: indicates non-rohs compliant.
144 catalog 1307191 dimensions are in millimeters dimensions are shown for usa: 1-800-522-6752 south america: 55-11-2103-6000 revised 3-07 and inches unless otherwise reference purposes only. canada: 1-905-470-4425 hong kong: 852-2735-1628 specified. values in brackets specifications subject mexico: 01-800-733-8926 japan: 81-44-844-8013 www.tycoelectronics.com are standard equivalents. to change. c. america: 52-55-1106-0803 uk: 44-8706-080-208 rf coax connectors series 1.6/5.6 ms (75 ohm) (continued) 21.0 [0.83] 12.8 [0.50] 10.8 [0.43] 8.2 [0.32] mounting panel 13.8 [0.54] 28.4 [1.12] 2.0 [0.08] max. ecn0966-u m9.0x0.5 [0.35]x[0.02] cable coupling type max. part no. 2yccy 1.0/6.5 a, b, f 9.8 0.39 1393682-8 2yc(ms)cy 1.0/6.5 a, b, f 9.8 0.39 right-angle bulkhead jack, solder/clamp right-angle bulkhead jack, solder/crimp a 10.8 [0.43] 10.8 [0.43] 8.2 [0.32] mounting panel 12.6 [0.50] 27.2 [1.07] 2.0 [0.08] max. ecn0967-3 m9.0x0.5 [0.35]x[0.02] cable coupling dim. max. part no. t ype a 02y(st)cy 0.45/2.0 a, b, f 13.0 3.6 4-1393682-9 0.51 0.14 2yccy 0.4/2.5 a, b, f 13.0 4.8 0.51 0.19 4-1393682-6 2yc(ms)cy 0.4/2.5 a, b, f 13.0 5.0 0.51 0.20 2ycy 0.7/4.4 a, b, f 15.8 6.1 0.62 0.24 rg 59 a, b, f 15.8 6.25 4-1393682-8 0.62 0.25 2yc(ms)cy 0.5/3.0 a, b, f 15.8 6.2 0.62 0.24 a 10.8 [0.43] 8.2 [0.32] mounting panel 12.6 [0.50] 27.2 [1.07] 2.0 [0.08] max. ecn0969-j m9.0x0.5 [0.35]x[0.02] cable coupling dim. max. part no. t ype a rg 179 a, b, f 15.0 2.67 3-1393680-0 0.59 0.105 2yccy 0.4/2.5 a, b, f 15.0 4.8 0.59 0.19 3-1393680-2 2yc(ms)cy 0.4/2.5 a, b, f 15.0 5.0 0.59 0.20 02y12yc(ms)c6y a, b, f 15.0 4.0 3-1393680-5 0.45/2.0 0.59 0.16 06ycc(st)6y a, b, f 15.0 3.3 4-1393682-3 0.4/1.6 0.59 0.13 02y(st)cy 0.45/2.0 a, b, f 15.0 3.6 3-1393680-7 0.59 0.14 27.2 [1.07] max. 10.8 [.43] 8.2 [.32] m9 x 0.5 [.35 x .02] a 1.35 [.053] min. 3.80 [ .150 ] cable coupling dim. max. part no. t ype a 02ys(st)chh 0.25/1.2 a, b, f 15.0 2.9 1460128-1* 0.59 0.11 02ys(st)chh 0.25/1.2 a, b, f 15.0 2.9 * 1460169-1** 0.59 0.11 * tray packaging. ** individual packaging. note: pa rt numbers are rohs compliant except: indicates non-rohs compliant.
145 catalog 1307191 dimensions are in millimeters dimensions are shown for usa: 1-800-522-6752 south america: 55-11-2103-6000 revised 3-07 and inches unless otherwise reference purposes only. canada: 1-905-470-4425 hong kong: 852-2735-1628 specified. values in brackets specifications subject mexico: 01-800-733-8926 japan: 81-44-844-8013 www.tycoelectronics.com are standard equivalents. to change. c. america: 52-55-1106-0803 uk: 44-8706-080-208 rf coax connectors series 1.6/5.6 ms (75 ohm) (continued) right-angle bulkhead jack, idc connection v ertical pc board mount jack pc board mount bulkhead jack 10.8 [0.43] 8.2 [0.32] ecn1614-y mounting panel 12.6 [0.50] 17.5 [0.69] 27.2 [1.07] 2.0 [0.08] max. m9.0x0.5 [0.35]x[0.02] cable coupling type max. part no. 02y(st)cy 0.45/2.0 a, b, f 3.6 1-1393757-6 0.14 8.2 [0.32] 9.0 [0.35] 0.8 [0.03] 14.4 [0.57] 4.2 [0.17] 1.0 [0.04] 0.8 [0.03] 29.2 [1.15] ecn0986-9 m9.0x0.5 [0.35]x[0.02] 1.3 [0.05] 10.0 [0.39] 10.8 [0.43] 5.08 [0.20] 5.08 [0.20] pitch 2.54 [0.10] coupling type part no. a, b, f 1-1393681-6 recommended mounting holes view a recommended mounting holes 8.2 [0.32] a b c m9.0x0.5 [0.35]x[0.02] 10.8 [0.43] 10.0 [0.39] 5.08 [0.20] 5.08 [0.20] inner- and outer conductor, press-fit coupling type dim. a dim. b dim. c part no. a, b, f 6.0 27.2 16.4 2-1393757-0 0.24 1.07 0.65 + 0.09 ?0.06 + 0.004 ?0.002 1.0 [0.04 ] 5 plcs. pitch 2.54 [0.10] thickness 1.5 [0.06] max. recommended mounting holes 7.00 [.276] 1.00 [.039] center contact 23.20 [.913] 9.00 [.354] 10.80 [.425] 4.50 [.177] 7.05 0.05 [.278 .002 ] m9 x 0.5-6g thread 3.00 0.13 [.118 .005 ] center contact 2.00 [.079] 3.00 [.118] 6.50 [.256] typ. coupling type part no. a, b, f 1274513-1 1.20 [.047] 1.50 [.059] 4 plcs. 5.60 [.220] 5.60 [.220] note: pa rt numbers are rohs compliant except: indicates non-rohs compliant.
146 catalog 1307191 dimensions are in millimeters dimensions are shown for usa: 1-800-522-6752 south america: 55-11-2103-6000 revised 3-07 and inches unless otherwise reference purposes only. canada: 1-905-470-4425 hong kong: 852-2735-1628 specified. values in brackets specifications subject mexico: 01-800-733-8926 japan: 81-44-844-8013 www.tycoelectronics.com are standard equivalents. to change. c. america: 52-55-1106-0803 uk: 44-8706-080-208 rf coax connectors series 1.6/5.6 ms (75 ohm) (continued) right-angle pc board mount bulkhead jack 8.2 [0.32] a b c m9.0x0.5 [0.35]x[0.02] d 4.5 [0.18] coupling dim. dim. dim. dim. dim. part no. t ype abcde a, b, f 4.0 16.0 6.0 10.75 1.3 2-1393681-1 0.16 0.63 0.24 0.42 0.05 a, b, f 3.3 16.0 6.0 10.75 1.3 2-1393681-2 0.13 0.63 0.24 0.42 0.05 a, b, f 3.7 22.9 6.45 11.25 1.8 2-1393681-3* 0.15 0.90 0.25 0.44 0.07 *with positioning and snap-on system onto pc board 1.3 [0.05] e 4 plcs. pitch 2.54 [0.10] recommended mounting holes 10.8 [0.43] 24.4 [0.96] b a 10.8 [0.43] 22.3 [0.88] b a coupling type dim. a dim. b part no. ? .1 [0.004] max. a 15.0 26.5 6-1460823-1 0.59 1.04 coupling type dim. a dim. b part no. ? .1 [0.004] max. b 15.0 26.5 6-1460823-2 0.59 1.04 u-link plug/plug note: pa rt numbers are rohs compliant except: indicates non-rohs compliant.
series 1.6/5.6 ms (75 ohm) (continued) plug 1.6/5.6 to jack 1.0/2.3 coupling part t ype no. a, f 2 2-1393670-2 a, f 2 6-1460821-2 2 only jack side measurement accessories plug 1.6/5.6 to plug 1.0/2.3 coupling part t ype no. a 6-1460821-1 between series adapters (75 ohm) 10.8 [0.43] 28.0 [1.10] 9.2 [0.36] 8.9 [0.35] 6.5 [0.26] 1) 1) 10.8 [0.43] 33.0 [1.30] 9.2 [0.36] 4.1 [0.16] 1) 147 catalog 1307191 dimensions are in millimeters dimensions are shown for usa: 1-800-522-6752 south america: 55-11-2103-6000 revised 3-07 and inches unless otherwise reference purposes only. canada: 1-905-470-4425 hong kong: 852-2735-1628 specified. values in brackets specifications subject mexico: 01-800-733-8926 japan: 81-44-844-8013 www.tycoelectronics.com are standard equivalents. to change. c. america: 52-55-1106-0803 uk: 44-8706-080-208 rf coax connectors 2.3 [0.09] m9.0x0.5 [0.35]x[0.02] 10.8 [0.43] threaded ring for installation of bulkhead jacks accessories soldering aid (sleeve) for jack (1-1393681-9) with solder termination part no. 2-1393562-2 cable stripping and installation e xample: see part number 2-1393562-2 under ?eries 1.0/2.3? page 137. 0.8 [0.03] 2.1 [0.08] 5.0 [0.20] 2.4 [0.09] 4.8 [0.19] 3.5 [0.14] part no. 1-1393562-0 these components are pro- vided when bulkhead jack part numbers are ordered, but can also be ordered separately. 1) detent for jack note: pa rt numbers are rohs compliant except: indicates non-rohs compliant.
148 catalog 1307191 dimensions are in millimeters dimensions are shown for usa: 1-800-522-6752 south america: 55-11-2103-6000 revised 3-07 and inches unless otherwise reference purposes only. canada: 1-905-470-4425 hong kong: 852-2735-1628 specified. values in brackets specifications subject mexico: 01-800-733-8926 japan: 81-44-844-8013 www.tycoelectronics.com are standard equivalents. to change. c. america: 52-55-1106-0803 uk: 44-8706-080-208 rf coax connectors measurement accessories (continued) between series adapters (75 ohm) (continued) bnc plug to jack 1.6/5.6 part no. 7-1393665-6 bnc plug to plug 1.6/5.6 part no. 7-1393665-4 14.5 [0.57] 46.4 [1.83] 10.8 [0.43] ecn1669-6 14.5 [0.57] 44.3 [1.74] 8.2 [0.32] ecn1670-9 plug 1.0/2.3 to jack 1.6/5.6 coupling part t ype no. a, b 2 , f 2 6-1460821-3 2 only jack side 6.5 [0.26] 34.5 [1.36] 8.9 [0.35] 8.2 [0.32] 10.8 [0.43] 1) 1) detent for jack jack 1.0/2.3 to jack 1.6/5.6 coupling part t ype no. a, b, f 6-1460821-4 4.1 [0.16] 39.4 [1.55] 8.2 [0.32] 10.8 [0.43] note: pa rt numbers are rohs compliant except: indicates non-rohs compliant.
149 catalog 1307191 dimensions are in millimeters dimensions are shown for usa: 1-800-522-6752 south america: 55-11-2103-6000 revised 3-07 and inches unless otherwise reference purposes only. canada: 1-905-470-4425 hong kong: 852-2735-1628 specified. values in brackets specifications subject mexico: 01-800-733-8926 japan: 81-44-844-8013 www.tycoelectronics.com are standard equivalents. to change. c. america: 52-55-1106-0803 uk: 44-8706-080-208 rf coax connectors measurement accessories (continued) t ermination (75 ohm) plug 1.6/5.6 coupling power part t ype w no. a 1.0 6-1393665-1 jack 1.0/2.3 coupling power part t ype w no. a, f 0.6 7-1393665-3 standard termination plug 1.0/2.3 coupling power part t ype w no. a 0.6 7-1393665-2 15.0 [0.59] 6.5 [0.26] 8.9 [0.35] 1) 23.1 [0.91] 4.1 [0.16] 6.5 [0.26] 29.6 [1.17] 10.8 [0.43] 1) detent for jack between series adapters (75 ohm) (continued) bnc jack to plug 1.6/5.6 part no. 7-1393665-7 bnc jack to jack 1.6/5.6 part no. 7-1393665-5 9.6 [0.38] 45.4 [1.79] 10.8 [0.43] 11.0 [0.43] 14.5 [0.57] ecn1671-h 9.6 [0.38] 45.4 [1.79] 8.2 [0.32] 11.0 [0.43] 14.5 [0.57] m9.0x0.5 [0.35]x[0.02] ecn1672-q note: pa rt numbers are rohs compliant except: indicates non-rohs compliant.
150 catalog 1307191 dimensions are in millimeters dimensions are shown for usa: 1-800-522-6752 south america: 55-11-2103-6000 revised 3-07 and inches unless otherwise reference purposes only. canada: 1-905-470-4425 hong kong: 852-2735-1628 specified. values in brackets specifications subject mexico: 01-800-733-8926 japan: 81-44-844-8013 www.tycoelectronics.com are standard equivalents. to change. c. america: 52-55-1106-0803 uk: 44-8706-080-208 rf coax connectors measurement accessories (continued) in-series adapter (75 ohm) adapter 1.6/5.6, jack/jack coupling part t ype no. a, b, f 1-1393665-1 note: u-link connectors see ?.6/5.6 section, page 146. adapter 1.6/5.6, plug/jack coupling part t ype no. a, b*, f* 1-1393681-7 *jack side only adapter 1.6/5.6, plug/plug coupling part t ype no. a 1393681-6 43.8 [1.73] 10.8 [0.43] 41.3 [1.63] 8.2 [0.32] m9.0x0.5 [0.35]x[0.02] 10.8 [0.43] 28.4 [1.12] 8.2 [0.32] m9.0x0.5 [0.35]x[0.02] 14.3 [0.56] 10.8 [0.43] note: pa rt numbers are rohs compliant except: indicates non-rohs compliant.
coaxial cables list of the coaxial cables that are listed in the various connector series of this section. cable-type designation characteristic max. cable dielectric diameter (mm)/ vde designation 2) us designation iec designation impedance ( ? ) outer diameter (mm) material 1) manufacturer des. 96-iec 50 1.9 0.91max/ptfe 5yc5ye 0.3/0.86 rg 178 50-1-1 50 2.1 0.87/ptfe rg 196 50-1-2 50 2.25 1.71max/ptfe 5yk 0.51/1.68 rg 405 50 2.6 1.60max/ptfe 5yc5ye 0.5/1.5 rg 316 50-2-1 50 2.8 1.60max/pe 2ycy 0.5/1.5 rg 174 50 3.0 1.52/ptfe 5ycc5y 0.5/1.5 rd 316 50 3.6 3.01max/ptfe 5yk 0.9/3.0 rg 402 50 6.4 5.38max/ptfe 5yk 1.63/5.33 rg 401 75 2.67 1.68max/ptfe 5yc6y 0.3/1.6 rg 179 75-2-1 75 3.0 1.60max/ptfe rd 179 75 3.3 1.68max/cell-fep 06ycc(st)6y 0.4/1.6 75 3.2 2.1max st 212 75 3.6 2.0max/cell-pe 02y(st)cy 0.45/2.0 75 4.0 2.0maxe/cell-pe 02y12yc(ms)c6y 0.45/2.0 75 4.0 2.54max/pe 2ycy 0.4/2.5 75 4.8 2.54max/pe 2yccy 0.4/2.5 75 5.0 2.54max/pe 2yc(ms)cy 0.4/2.5 75 6.1 4.25max/pe 2ycy 0.7/4.4 75 6.2 2.83max/pe 2yc(ms)cy 0.5/3.0 75 6.25 3.8max/pe 2ycy 0.58/3.7 rg 59 75 7.8 4.43max/pe 2yccy 0.7/4.4 75 9.8 6.4/pe 2yccy 1.0/6.5 75 9.8 6.4/pe 2yc(ms)cy 1.0/6.5 1) material label ptfe polytetrafluorethylene pe polyethylene fep perfluorethylene propylene pfa perfluoralkoxy copolymer 2) mounting label of the vde type numbers (from inside to outside) example: 6y c (ms) c y 0.7/4.0 -75 (r2/100) vs gr dielectric 1st screen intermediate layer 2nd screen outer jacket diameter inner conductor/dielectric characteristic impedance max. reflection (r) in % / frequency in mhz specifications on inner conductor and/or jacket color explanation dielectric and jacket 2y = pe 5y = ptfe 02y = cell pe 06y = cell fep 6y = fep screen: c = cu braiding k = cu tape intermediate layer: ms = magnetic screen st = static screen specifications on inner conductor: vs = silver plated staku = bare copper-clad steel wire conductor jacket color: gn = green gr = grey rt = red ws = white 151 catalog 1307191 dimensions are in millimeters dimensions are shown for usa: 1-800-522-6752 south america: 55-11-2103-6000 revised 3-07 and inches unless otherwise reference purposes only. canada: 1-905-470-4425 hong kong: 852-2735-1628 specified. values in brackets specifications subject mexico: 01-800-733-8926 japan: 81-44-844-8013 www.tycoelectronics.com are standard equivalents. to change. c. america: 52-55-1106-0803 uk: 44-8706-080-208 rf coax connectors
152 catalog 1307191 dimensions are in millimeters dimensions are shown for usa: 1-800-522-6752 south america: 55-11-2103-6000 revised 3-07 and inches unless otherwise reference purposes only. canada: 1-905-470-4425 hong kong: 852-2735-1628 specified. values in brackets specifications subject mexico: 01-800-733-8926 japan: 81-44-844-8013 www.tycoelectronics.com are standard equivalents. to change. c. america: 52-55-1106-0803 uk: 44-8706-080-208 rf coax connectors smp microminiature push-on coaxial connectors product facts intermateable with corning gilbert gpo series connector desc approved enhanced performance features simplified assembly smp microminiature push-on coaxial connectors provide solutions for todays modu- lar designs with denser packaging requirements. the extremely small size of the smp offers a versatile solution for high density packaging allowing connector center-to-center spacing of 4.32 [0.17]. the push-on interface facilitates easier assembly and test with a positive snap-in fea- ture to indicate a fully mated connection. the rugged smp interface can withstand harsh environ- ments of mechanical shock and vibration, typically found in military or aero- space related applications. this smp connector inter- face is the standard used by defense electronics supply center (desc) to generate the smp push-on connector series. smp connectors can be your design solution for mechanical packaging and frequency response. the smp interface provides 0.020" of radial misalign- ment for critical blindmate applications. mating forces are strictly controlled to ensure reliable connections per mated pair or when simultaneously mating mul- tiple connectors. cable jacks include an anti-rock- ing ring to ensure reliable mechanical performance r egardless of the operating environment. smp connec- tors offer enhanced broad- band vswr performance of 1.15:1 max thru 26ghz and 1.40:1 max thru 40ghz. standard design smp configurations include cable connectors, straight and right-angle, for 0.047 and 0.085 semi-rigid cable, full detent, limited detent and smooth bore mating shrouds that can be bulk- head or flange mounted and glass feedthroughs for coax to circuit launchers. in-series adapters for mod- ule to module intermating and between series adapters for integrating or testing systems or components parameters. smp shroud and jack to jack adapter assembly t ypical vswr for smp jack to jack adapter pa rt numbers 1056700-1 and 1056721-1 1.50:1 1.40:1 1.30:1 1.20:1 1.10:1 0.0 8.0 16.0 24.0 32.0 40.0 ghz vswr between series adapters for smp between series adapters, see pages 253-262. note: pa rt numbers are rohs compliant except: indicates non-rohs compliant. gpo is a trademark of corning gilbert, inc.
153 catalog 1307191 dimensions are in millimeters dimensions are shown for usa: 1-800-522-6752 south america: 55-11-2103-6000 revised 3-07 and inches unless otherwise reference purposes only. canada: 1-905-470-4425 hong kong: 852-2735-1628 specified. values in brackets specifications subject mexico: 01-800-733-8926 japan: 81-44-844-8013 www.tycoelectronics.com are standard equivalents. to change. c. america: 52-55-1106-0803 uk: 44-8706-080-208 rf coax connectors smp microminiature push-on coaxial connectors (continued) general materials and finishes housings and center contacts beryllium copper per astm-b-196; gold plate over nickel plate dielectric ptfe fluorocarbon per astm-d-1457 shrouds stainless steel per astm-a582 type 303; passivate per astm-a380 hermetic seal glass bead electrical f requency range dc - 40.0 ghz vswr 1.10:1 maximum dc - 23.0 ghz 1.15:1 maximum 23.0 - 26.0 ghz 1.40:1 maximum 26.0 - 40.0 ghz v oltage rating 335 vrms maximum at sea level insertion loss 0.10 f (ghz) maximum insulation resistance 5000 megohms minimum dielectric withstanding voltage 500 volts (vrms minimum) rf high potential 325 volts (vrms minimum) @ 5 mhz impedance 50 ohms nominal rf leakage -80db to 3 ghz, -65db from 3 to 26.5 db minimum contact resistance initial center contact 6.0 milliohms maximum outer contact 2.0 milliohms maximum mechanical durability 100 mating cycles minimum radial misalignment ?.020 minimum axial misalignment .000/.010 f orce to engage full detent 15.0 lbs. maximum half detent 10.0 lbs. maximum smooth bore 2.0 lbs. maximum f orce to disengage full detent 5.0 lbs. minimum half detent 2.0 lbs. minimum smooth bore 0.5 lbs. minimum center contact retention 1.5 lbs. minimum axial force environmental operating temperature -65? to +165? vibration per mil-std-202, method 204, test condition d shock per mil-std-202, method 213, test condition i thermal shock per mil-std-202, method 107, test condition b moisture resistance per mil-std-202 method 106, except step 7b shall be omitted. resistance shall be 200 megohms within 5 minutes after removal from humidity. specifications jack note: the u.s. government (desc) has determined that the above specified interface dimensions are interchangeable and intermateble with corning gilbert gpo series rf connectors. 1 1 p er desc drawing numbers 94007 and 94008, series smp. 3.40 [.132] min. 3.43 [.135] 3.20 .050 [.125 .002 ] 2.80 .050 [.110 .002 ] dia. 2.8 [.112] min. 8.60 .076 [.142 .003 ] dia. dia. max. 3.43 [.135] dia. max. 3.70 [.145] dia. max. emi ring anti-rock ring full detent bullet smooth bore shroud interface dimensions gpo is a trademark of corning gilbert, inc.
154 catalog 1307191 dimensions are in millimeters dimensions are shown for usa: 1-800-522-6752 south america: 55-11-2103-6000 revised 3-07 and inches unless otherwise reference purposes only. canada: 1-905-470-4425 hong kong: 852-2735-1628 specified. values in brackets specifications subject mexico: 01-800-733-8926 japan: 81-44-844-8013 www.tycoelectronics.com are standard equivalents. to change. c. america: 52-55-1106-0803 uk: 44-8706-080-208 rf coax connectors smp microminiature push-on coaxial connectors (continued) straight cable jack, solder attachment 6.40 [.250] 3.40 [.135] dia. max. 3.40 [.133] dia. emi ring anti-rock ring right-angle cable jack, solder attachment 4.10 [.161] max. 3.40 [.135] dia. max. 5.80 [.230] max. dim.b dim.a emi ring anti-rock ring jack to jack adapter (bullet) 6.40 / 6.50 [.2525 / .2555] 3.40 [.135] dia. max. 3.40 [.133] dia. cable part no. .047 semi-rigid 1056526-1 .085 semi-rigid 1056527-1 (rg 405) cable dim. a dim. b part no. .047 semi-rigid 4.8 5.8 1056553-1 .190 .230 .085 semi-rigid 5.3 6.7 1056554-1 (rg 405) .209 .265 part no. 1056700-1 note: pa rt numbers are rohs compliant except: indicates non-rohs compliant.
155 catalog 1307191 dimensions are in millimeters dimensions are shown for usa: 1-800-522-6752 south america: 55-11-2103-6000 revised 3-07 and inches unless otherwise reference purposes only. canada: 1-905-470-4425 hong kong: 852-2735-1628 specified. values in brackets specifications subject mexico: 01-800-733-8926 japan: 81-44-844-8013 www.tycoelectronics.com are standard equivalents. to change. c. america: 52-55-1106-0803 uk: 44-8706-080-208 rf coax connectors smp microminiature push-on coaxial connectors (continued) shroud ?threaded 3.00 [.120] 4.10 [.160] dia. max. 3.00 [.120] 4.20 [.165] 1.10 [.045] dim.d 2 plcs. dim.c dim.b dim.a dim.a dim.b shroud ?2 hole flange surface mount shroud ?press fit description dim. a dim. b dim. c dim. d part no. 12.2 8.3 4.7 2.5 .480 .328 .187 .098 1056721-1 15.8 12.2 5.7 2.6 full detent .625 .481 .223 .102 1056722-1 10.2 7.2 4.2 1.9 .400 .282 .165 .073 1056724-1 12.2 8.3 4.7 2.5 limited detent .480 .328 .187 .098 1056729-1 10.2 7.2 4.2 1.9 .400 .282 .165 .073 1056731-1 description part no. full detent 1056745-1 limited detent 1056743-1 smooth bore 1056744-1 description dim. a dim. b part no. limited detent 3.9 2.0 1056736-1 .154 .080 note: pa rt numbers are rohs compliant except: indicates non-rohs compliant.
156 catalog 1307191 dimensions are in millimeters dimensions are shown for usa: 1-800-522-6752 south america: 55-11-2103-6000 revised 3-07 and inches unless otherwise reference purposes only. canada: 1-905-470-4425 hong kong: 852-2735-1628 specified. values in brackets specifications subject mexico: 01-800-733-8926 japan: 81-44-844-8013 www.tycoelectronics.com are standard equivalents. to change. c. america: 52-55-1106-0803 uk: 44-8706-080-208 rf coax connectors smp microminiature push-on coaxial connectors (continued) glass bead assembly plug, straight, full detent shroud ?solder-in hermetic .400 [.015] dia. 1.60 [.063] 3.20 [.125] 2.50 [.099] 3.70 [.145] dia. 2.50 [.098] 2.00 [.080] 3.60 [.140] 1.30 [.050] dia. 0.40 [.015] dia. description part no. full detent 1056750-1 limited detent 1056751-1 smooth bore 1056752-1 part no. 1056728-1 4.20 [.164] 8.10 [.320] 9.10 [.358] 4.70 [.186] 2.20 [.085] 0.60 0.10 [.024 .002 ] dia. 0.50 0.10 [.020 .002 ] dia. m/a-com part model number no. 2965-5006-62 1061692-1 plug, right-angle, limited detent 3.60 [.140] 0.40 [.015] 6.90 [.272] 4.60 [.182] 3.80 [.150] sq. 5.10 [.200] sq. 0.30 [.010] 1.80 [.072] osmp plug full detent ref. plane 1.70 [.068] 4 plcs. 0.80 [.030] 4 plcs. note: pa rt numbers are rohs compliant except: indicates non-rohs compliant.
157 catalog 1307191 dimensions are in millimeters dimensions are shown for usa: 1-800-522-6752 south america: 55-11-2103-6000 revised 3-07 and inches unless otherwise reference purposes only. canada: 1-905-470-4425 hong kong: 852-2735-1628 specified. values in brackets specifications subject mexico: 01-800-733-8926 japan: 81-44-844-8013 www.tycoelectronics.com are standard equivalents. to change. c. america: 52-55-1106-0803 uk: 44-8706-080-208 osp miniature modular blind mate connectors rf coax connectors product facts interface designed for multiple interconnects for high performance microwave system requirements module to module, module to motherboard, fixed and float mount bulkhead or panel mount for flexible and semi-rigid cable osp miniature connectors for semi-rigid cable meet high performance require- ments for microwave multiple interconnects. standard units are available in bulkhead or panel mount designs for either direct solder or solderless com- pression crimp attachment. complete tooling for both versions is located in the t ooling section of this catalog. jack connectors are avail- able in either float or rigid mount. rigid mount units will function to specifications up to .10 [.004] radial mis- alignment with the mating plug connector. applications r equiring greater than .10 [.004 ] radial misalignment can use either the float design or floating connector plates with guide pins. the solderless compression crimp attachment meets high performance require- ments for microwave sys- tem applications. the cable attachment is permanent and highly reliable. ease of assembly permits users unskilled in soldering techniques to rapidly pro- duce cable assemblies with consistently excellent mechanical and electrical performance.
158 catalog 1307191 dimensions are in millimeters dimensions are shown for usa: 1-800-522-6752 south america: 55-11-2103-6000 revised 3-07 and inches unless otherwise reference purposes only. canada: 1-905-470-4425 hong kong: 852-2735-1628 specified. values in brackets specifications subject mexico: 01-800-733-8926 japan: 81-44-844-8013 www.tycoelectronics.com are standard equivalents. to change. c. america: 52-55-1106-0803 uk: 44-8706-080-208 osp miniature modular blind mate connectors (continued) rf coax connectors engineering data impedance 50 ohms frequency dc to 22.0 ghz t emperature rating -65 to 125 c electrical rg 402 (.141) semi-rigid rg 405 (.085) semi-rigid vswr dc - 18.0 ghz 1.02 + .005f (ghz) 1.05 + .005f (ghz) 18.0 - 22.0 ghz 1.02 + .008f (ghz) 1.05 + .009f (ghz) rf transmission loss .03 x -- f (ghz) .03 x -- f (ghz) insulation resistance 5,000 megohms min. 5,000 megohms min. contact resistance center contact 2.0 milliohms max. 2.0 milliohms max. outer contact 2.0 milliohms max. 2.0 milliohms max. outer contact to cable 0.5 milliohms max. 0.5 milliohms max. dielectric withstanding voltage 1500 volts rms 1000 volts rms corona extinction voltage at 70,000 ft. 375 volts min. 335 volts min. rf high potential at 5 mhz 1,000 volts rms 670 volts rms rf leakage interface only -(90-fghz) db min. (fully mated) -(90-fghz) db min. (fully mated) power handling 300w at 3 ghz (sea level) and room temperature environmental corrosion method 101, condition b, mil-std-202 vibration method 204, condition d, 20gs, mil-std-202 shock method 213, condition i, 100gs, mil-std-202 t emperature cycling method 107, condition b, mil-std-202 moisture resistance method 106, mil-std-202 material housing corrosion resistant steel type 303 (stainless) per astm a484 and a582 center contact beryllium copper per astm-b-196 dielectric tfe fluorocarbon per astm-d-1457 gasket (o?ing) mil-p-25732 mechanical force to engage 3 pounds max. force to disengage 1.5 pounds max. center contact retention 6 pounds min. durablilty 5,000 cycles radial misalignment rigid mount ?10 [? 004] float mount ?51 [?020] mating characteristics jack connector center contact socket oversize test pin .945 + .003 [.0372 + .0001] dia. t est pin finish 16 micro inch insertion depth .76/1.14 [.030/.045] number of insertions 3 insertion force test pin .940 + .003 [.0370 + .0001] dia. t est pin finish 16 micro inch insertion depth 1.27/1.91 [.050/.075] insertion force 3 pounds max. withdrawal force test pin .90 + .003 [.0355 - .0001] dia. t est pin finish 16 micro inch insertion depth 1.27/1.91 [.050/.075] withdrawal 1 ounce min. finish center contact gold plate per mil-g-45204, type ii, class 1 over copper plate per mil-c-14550 housing gold plate per mil-g-45204, typ ii, class 0 over nickel plate per qq-n-290, class 2 or passivate per astm-a380 the specifications given r efer specifically to mated pair of part numbers 1059410-1 and 1059402-1 (rg 402) and 1059412-1 and 1059404-1 (rg 405). specifications on other con- nectors are available on r equest. the general electrical, mechanical and environ- mental specifications in the following table are recom- mended for procurement documents or drawings. all dimensions shown are nominal. contact the factory for specific tolerances.
159 catalog 1307191 dimensions are in millimeters dimensions are shown for usa: 1-800-522-6752 south america: 55-11-2103-6000 revised 3-07 and inches unless otherwise reference purposes only. canada: 1-905-470-4425 hong kong: 852-2735-1628 specified. values in brackets specifications subject mexico: 01-800-733-8926 japan: 81-44-844-8013 www.tycoelectronics.com are standard equivalents. to change. c. america: 52-55-1106-0803 uk: 44-8706-080-208 osp miniature modular blind mate connectors (continued) interface mating dimensions rf coax connectors the connector interface, specifically designed for multiple interconnects, main- tains reliable performance over the typical mechanical tolerance required in cost effective packaging. the interface test data shows excellent perform- ance is maintained with mat- ing gaps up to 0.38 [.015]. meets mil-std-348 figure 321. intermateable to bma connectors. jack plug letter dimensions a 1.78 .070 nom. b 5.72 .225 min. c 7.62 .300 ref. d 5.00 .197 nom.* e 5.08 .200 max. f 3.23 .127 max.* *with spring bottomed letter dimensions a 1.78 .070 nom. b 5.33 .210 nom. c 7.62 .300 ref. d 5.05 .199 min. e 0.91 .036 nom. f 3.25 .128 min.
160 catalog 1307191 dimensions are in millimeters dimensions are shown for usa: 1-800-522-6752 south america: 55-11-2103-6000 revised 3-07 and inches unless otherwise reference purposes only. canada: 1-905-470-4425 hong kong: 852-2735-1628 specified. values in brackets specifications subject mexico: 01-800-733-8926 japan: 81-44-844-8013 www.tycoelectronics.com are standard equivalents. to change. c. america: 52-55-1106-0803 uk: 44-8706-080-208 osp miniature modular blind mate connectors (continued) for semi-rigid cable, direct solder attachment rf coax connectors bulkhead feedthrough cable plug rear mount a dia. b dia. hex. 17.5 [.690] 7.9 [.312] max. ed 9.19 [.362] dia. 6.1 0.03 [.240 .001 ] + 0.03 ?.000 + .001 ] ?.000 6.1 [.242 recommended mounting hole dia. flange mount cable jack floating rear mount b dia. 18.0 [.710] osp jack 14.2 [.560] dia. 19.1 [.750] dia. 2 holes a dia. + 0.25 ?0.00 + .010 ?.000 9.5 [.375 ] + 0.10 ?0.03 + .004 ?.001 2.6 [.102 ] dia. 7.1 [.280] 9.5 [.372] 14.2 0.10 [.560 .004 ] + 0.05 ?0.03 + .002 ] ?.001 9.6 [.377 recommended mounting hole cable dimensions part no. ab rg 402/u 3.58 3.7 4.6 1059453-1 .141 .144 .180 rg 405/u 2.16 2.3 3.0 1059456-1 .085 .089 .120 finish: inner housing that is soldered to cable is gold plated. outer housing is passivated stainless steel. when using semi-rigid cable, it is recommended that a service loop be used to f acilitate the float features of the connector. bulkhead feedthrough cable jack rigid rear mount a dia. b dia. hex. 18.0 [.710] 11.1 [.437] dia. 6.4 [.250] max. 9.19 [.362] ed ole + 0.03 ?.000 + .001 ] ?.000 9.1 [.359 11 [.43 dia. recommended mounting hole cable plating dimensions part no. ab rg 402/u 3.58 gold 3.7 4.6 1059410-1 .141 .144 .180 rg 405/u 2.16 gold 2.3 3.0 1059412-1 .085 .089 .120 cable plating dimensions part no. ab rg 402/u 3.58 gold 3.7 4.6 1059402-1 .141 .144 .180 rg 405/u 2.16 gold 2.3 3.0 1059404-1 .085 .089 .120 note: pa rt numbers are rohs compliant except: indicates non-rohs compliant.
161 catalog 1307191 dimensions are in millimeters dimensions are shown for usa: 1-800-522-6752 south america: 55-11-2103-6000 revised 3-07 and inches unless otherwise reference purposes only. canada: 1-905-470-4425 hong kong: 852-2735-1628 specified. values in brackets specifications subject mexico: 01-800-733-8926 japan: 81-44-844-8013 www.tycoelectronics.com are standard equivalents. to change. c. america: 52-55-1106-0803 uk: 44-8706-080-208 osp miniature modular blind mate connectors (continued) for semi-rigid cable, direct solder attachment (continued) rf coax connectors dia. 16.2 [.640] dia. 11.2 [.440] max. 9.3 0.03 [.365 .001 ] a dia. b dia. cable plating dimensions part no. ab rg 402/u 3.58 gold 3.7 4.6 1059505-1 .141 .144 .180 rg 405/u 2.16 gold 2.3 3.0 1059506-1 .085 .089 .120 when using semi-rigid cable, it is recommended that a service loop be used to f acilitate the float features of the connector. low profile ?panel feedthrough cable jack floating rear mount a dia. b dia. 18.0 [.710] dia. 7.6 [.300] cable plating dimensions part no. ab rg 402/u 3.58 gold 3.7 4.6 1059465-1 .141 .144 .180 rg 405/u 2.16 gold 2.3 3.0 1059467-1 .085 .089 .120 recommended removal tool part number 1059774-1 is described in the t ooling section of this catalog. when using semi-rigid cable, it is recommended that a service loop be used to fa cilitate the float features of the connector. p anel a ?003 panel b ?003 stand-off panel c +.050/?000 2.3 9.5 7.2 .090 .375 .285 2.3 11.1 5.6 .090 .438 .222 2.3 12.7 4.1 .090 .500 .160 3.2 9.5 6.4 .125 .375 .250 3.2 11.1 4.7 .125 .438 .187 3.2 12.7 3.2 .125 .500 .125 low profile ?bulkhead feedthrough cable jack floating rear mount recommended mounting detail stand-off c panel a panel b + 0.08 ?0.00 + .003 ] ?.000 8.6 [.340 + 0.05 ?0.00 + .002 ] ?.000 8.0 [.316 + 0.00 ?0.13 + .000 ] ?.005 1.3 [.050 panel b dia. 16.2 [.640] dia. 11.2 [.440] max. 9.3 0.03 [.365 .001 ] a dia. b dia. dia. + 0.05 ?0.03 + .002 ] ?.001 9.4 [.368 recommended mounting hole note: pa rt numbers are rohs compliant except: indicates non-rohs compliant.
162 catalog 1307191 dimensions are in millimeters dimensions are shown for usa: 1-800-522-6752 south america: 55-11-2103-6000 revised 3-07 and inches unless otherwise reference purposes only. canada: 1-905-470-4425 hong kong: 852-2735-1628 specified. values in brackets specifications subject mexico: 01-800-733-8926 japan: 81-44-844-8013 www.tycoelectronics.com are standard equivalents. to change. c. america: 52-55-1106-0803 uk: 44-8706-080-208 osp miniature modular blind mate connectors (continued) for semi-rigid cable, solderless compression crimp attachment rf coax connectors bulkhead feedthrough cable plug fixed rear mount dia. hex. dia. b 7.9 [.312] 5.5 [.218] max. 9.19 [.362] 6.1 0.03 [.240 .001 ] a dia. d + 0.03 ?.000 + .001 ] ?.000 6.1 [.242 dia. recommended mounting hole flange mount cable jack floating rear mount b dia. 9.7 [.380] 14.2 [.560] dia. 9.5 [.372] dia. 5.5 [.218] dia. 19.1 [.750] dia. 2 plcs. 2.6 [.102] a dia. dia. 7.1 [.280] 9.5 [.372 14.2 0.10 [.560 .004 ] + 0.05 ?0.03 + .002 ] ?.001 9.6 [.377 recommended mounting hole bulkhead feedthrough cable jack fixed rear mount hex. b 11.1 [.437] dia. 6.4 [.250] dia. 5.5 [.218] max. 12.7 [.500] a dia. d + 0.03 ?.000 + .001 ] ?.000 9.1 [.359 11 [.43 dia. recommended mounting hole dim. b cable plating dim. a before after part no. crimping crimping rg 405/u passivated 2.16 stainless 2.2 19.8 17.2 1059399-1 .085 steel .088 .782 .677 outline drawing shows after crimp dimensions. dim. b cable plating dim. a before after part no. crimping crimping rg 402/u passivated 3.58 stainless 3.6 21.1 18.2 1059408-1 .141 steel .143 .830 .715 outline drawing shows after crimp dimensions. dim. b cable plating dim. a before after part no. crimping crimping rg 402/u passivated 3.58 stainless 3.6 22.6 19.8 1059451-1 .141 steel .143 .891 .780 rg 405/u passivated 2.16 stainless 2.2 22.6 19.8 1059452-1 .085 steel .088 .891 .780 outline drawing shows after crimp dimensions. when using semi-rigid cable, it is recommended that a service loop be used to facilitate the float features of the connector. note: pa rt numbers are rohs compliant except: indicates non-rohs compliant.
163 catalog 1307191 dimensions are in millimeters dimensions are shown for usa: 1-800-522-6752 south america: 55-11-2103-6000 revised 3-07 and inches unless otherwise reference purposes only. canada: 1-905-470-4425 hong kong: 852-2735-1628 specified. values in brackets specifications subject mexico: 01-800-733-8926 japan: 81-44-844-8013 www.tycoelectronics.com are standard equivalents. to change. c. america: 52-55-1106-0803 uk: 44-8706-080-208 osp miniature modular blind mate connectors (continued) for flexible cable, crimp attachment rf coax connectors bulkhead feedthrough cable plug rear mount max. 34.9 [1.375] ref. 21.2 [.833] 11.4 [.447] dia. 6.9 0.03 [.240 .001 ] ded hole + 0.03 ?.000 + .001 ] ?.000 6.1 [.242 11 [.44 dia. 6.9 [.240 recommended mounting hole flange mount cable jack floating rear mount dia. 9.5 [.372] dia. 21.7 [.875] ref. 35.6 [1.400] max. 2.6 [.102] dia. 2 plcs. 19.1 [.750] dia. 14.2 [.560] 9.5 [.375] 7.1 [.280] 14.2 .102 [.560 .004 ] + .051 ?.025 + .002 ] ?.001 9.6 [.377 dia. 9.5 [.372 dia recommended mounting hole bulkhead feedthrough cable jack rigid rear mount max. 35.6 [1.400] ref. 21.7 [.855] 6.4 [.250] dia. 9.1 0.03 [.357 .001 ] + 0.03 ?.000 + .001 ] ?.000 9.1 [.359 dia. recommended mounting hole cable plating part no. rg 174/u, 179, 187, 188, 316 p assivated stainless steel 1059523-1 cable plating part no. rg 55/u, p assivated stainless steel 1059540-1 142, 223, 400 rg 174/u, 179, p assivated stainless steel 1059541-1 187, 188, 316 rg 178, p assivated stainless steel 1058572-1 double braid cable plating part no. rg 55/u, 142, 223, 400 p assivated stainless steel 1059525-1 low profile ?panel feedthrough cable jack rear mount 7.6 [.300] dia. 35.6 [1.400] 22.3 [.878] max. ref. dia. + 0.05 ?0.03 + .002 ] ?.001 9.4 [.368 recommended mounting hole note: pa rt numbers are rohs compliant except: indicates non-rohs compliant. cable plating part no. rg 174/u, 179, p assivated stainless steel 1059551-1 187, 188, 316 refer to recommended mounting hole detail for semi-rigid cable low profile feedthrough cable jack. recommended removal tool part number 1059774-1 as described in the t ooling section of this catalog.
164 catalog 1307191 dimensions are in millimeters dimensions are shown for usa: 1-800-522-6752 south america: 55-11-2103-6000 revised 3-07 and inches unless otherwise reference purposes only. canada: 1-905-470-4425 hong kong: 852-2735-1628 specified. values in brackets specifications subject mexico: 01-800-733-8926 japan: 81-44-844-8013 www.tycoelectronics.com are standard equivalents. to change. c. america: 52-55-1106-0803 uk: 44-8706-080-208 rf coax connectors osp miniature modular blind mate connectors (continued) panel mount straight terminal 2-hole flange mount plug receptacle 22.3 [.878] 8.4 [.330] 9.9 [.390] 1.7 [.065] 6.4 [.250] 4.1 [.162] 1.3 .050 dia. dia. dia. 15.9 [.625] 12.2 [.481] 6.6 [.260] 2.6 [.102] dia. 2 plcs. 4-hole flange mount plug receptacle dia. 6.4 [.250] 22.3 [.878] dia. 2 plcs. 2.6 [.102] sq. 12.7 [.500] typ. 8.6 [.340] dia. 1.3 [.050] dia. 4.1 [.162] 2-hole flange mount jack receptacle 7.6 [.300] 12.2 [.481] dia. 1.3 [.050] 27.4 [1.080] dia. 4.1 [.162] 15.9 [.625] dia. 2 plcs. 2.6 [.102] plating part no. pa ssivated stainless 1059566-1 steel plating part no. pa ssivated stainless 1059596-1 steel plating part no. pa ssivated stainless 1059563-1 steel plating part no. pa ssivated stainless 1059594-1 steel 4-hole flange mount jack receptacle 27.4 [1.080] dia. 2 plcs. 2.6 [.102] sq. 12.7 [.500] typ. 8.6 [.340] dia. 1.3 [.050] dia. 4.1 [.162] note: pa rt numbers are rohs compliant except: indicates non-rohs compliant.
165 catalog 1307191 dimensions are in millimeters dimensions are shown for usa: 1-800-522-6752 south america: 55-11-2103-6000 revised 3-07 and inches unless otherwise reference purposes only. canada: 1-905-470-4425 hong kong: 852-2735-1628 specified. values in brackets specifications subject mexico: 01-800-733-8926 japan: 81-44-844-8013 www.tycoelectronics.com are standard equivalents. to change. c. america: 52-55-1106-0803 uk: 44-8706-080-208 rf coax connectors osp miniature modular blind mate connectors (continued) panel mount (continued) straight terminal threaded installation panel feedthrough plug receptacle 10.4 [.410] 6.4 [.250] dia. 0.5 [.020] dia. 1.6 [.064] dia. dia. 5.3 [.210] 5.5 0.03 [.218 .001 ] 5.3 0.05 [.210 .002 ] dia. panel 1.7 0.03 [.066 .001 ] recommended mounting hole threaded installation panel feedthrough jack receptacle 10.4 [.410] 6.4 [.250] dia. 0.5 [.020] dia. 1.6 [.064] dia. dia. 5.3 [.210] 5.5 0.03 [.218 .001 ] 5.3 0.05 [.210 .002 ] dia. panel 1.7 0.03 [.066 .001 ] recommended mounting hole plating part no. pa ssivated stainless 1059617-1 steel plating part no. pa ssivated stainless 1059657-1 steel plating part no. pa ssivated stainless 1059651-1 steel plating part no. pa ssivated stainless 1059654-1 steel 6.4 [.250] 7.92 [.312] dia. 7.6 [.300] dia. dia. 0.5 [.020] 6.4 0.03 [.250 .001 ] + 0.05 ?.000 + .002 ] ?.000 6.4 [.253 dia. dia. 1.2 0.03 [.046 .001 ] dia. + .000 ?0.05 + .000 ] ?.002 6.3 [.248 dia. recommended mounting hole press fit installation panel feedthrough jack receptacle press fit installation panel feedthrough plug receptacle 6.4 [.250] dia. 7.6 [.300] dia. 0.5 [.020] 6.4 0.03 [.250 .001 ] + 0.05 ?.000 + .002 ] ?.000 6.4 [.253 dia. dia. 1.2 0.03 [.046 .001 ] dia. + .000 ?0.05 + .000 ] ?.002 6.3 [.248 dia. recommended mounting hole note: pa rt numbers are rohs compliant except: indicates non-rohs compliant.
166 catalog 1307191 dimensions are in millimeters dimensions are shown for usa: 1-800-522-6752 south america: 55-11-2103-6000 revised 3-07 and inches unless otherwise reference purposes only. canada: 1-905-470-4425 hong kong: 852-2735-1628 specified. values in brackets specifications subject mexico: 01-800-733-8926 japan: 81-44-844-8013 www.tycoelectronics.com are standard equivalents. to change. c. america: 52-55-1106-0803 uk: 44-8706-080-208 rf coax connectors osp miniature modular blind mate connectors (continued) printed circuit board mount straight plug receptacle captured contact dia. 1.3 [.050] 12.7 [.500] 6.4 [.250] sq. sq. 4 plcs. 1.0 [.040] 5.1 [.200] typ. 5.1 [.200] typ. + 0.08 ?.000 + .003 ] ?.000 1.7 [.067 dia. hole typ. recommended mounting hole plating part no. gold 1059684-1 plating part no. gold 1059681-1 plating part no. gold 1059691-1 straight jack receptacle captured contact dia. dia. 1.3 [.050] 13.5 [.530] 9.5 [.375] sq. 4 plcs. 1.0 [.040] 5.1 [.200] typ. 5.1 [.200] typ. + 0.08 ?.000 + .003 ] ?.000 1.7 [.067 dia. hole typ. recommended mounting hole right-angle plug receptacle ? captured contact surface mount v ertical plug with small leg dia. sq. 1.3 [.050] 13.5 [.530] 6.4 [.250] 15.0 [.590] sq. 4 plcs. 1.0 [.040] 5.1 [.200] typ. 5.1 [.200] typ. + 0.08 ?.000 + .003 ] ?.000 1.7 [.067 dia. hole typ. recommended mounting hole plating part no. gold 1253111-1 dia. osp plug sq. 1.3 [.050] 9.4 [.372] o-ring 6.4 [.250] sq. 4 plcs. 1.6 [.062] 4.5 [.178] typ. 4.5 [.178] typ. + 0.08 ?.000 + .003 ] ?.000 1.7 [.067 dia. + 0.08 ?.000 + .003 ] ?.000 2.5 [.098 dia. hole typ. 4 plcs. recommended mounting hole note: pa rt numbers are rohs compliant except: indicates non-rohs compliant.
167 catalog 1307191 dimensions are in millimeters dimensions are shown for usa: 1-800-522-6752 south america: 55-11-2103-6000 revised 3-07 and inches unless otherwise reference purposes only. canada: 1-905-470-4425 hong kong: 852-2735-1628 specified. values in brackets specifications subject mexico: 01-800-733-8926 japan: 81-44-844-8013 www.tycoelectronics.com are standard equivalents. to change. c. america: 52-55-1106-0803 uk: 44-8706-080-208 rf coax connectors osp miniature modular blind mate connectors (continued) hermetically sealed metal-to-metal rigid gasket seal ? panel feedthrough plug receptacle field replaceable solder and braze-in panel feedthrough plug receptacle 10.4 [.410] 0.5 [.020] dia. rigid gasket 5.3 [.210] dia. 1.6 [.064] dia. 9.9 [.390] 5.3 [.210] dia. dia. dia. glass seal 5.6 0.13 [.220 .005 ] 0.5 0.03 [.020 .001 ] + 0.05 ?0.03 + .002 ] ?.001 4.0 [.158 rigid gasket seal ? panel feedthrough jack receptacle 11.2 [.450] 0.5 [.020] dia. 1.6 [.064] dia. 5.3 [.210] dia. rigid gasket vswr rf leakage plating part no. (ghz) (db) 1.04 + .009f ?90-fghz) passivated stainless steel 6059632-1 installation thermal limit: 250?. recommended mounting hole detail a follows, pg 168. vswr rf leakage plating part no. (ghz) (db) 1.04 + .009f ?90-fghz) passivated stainless steel 6059665-1 installation thermal limit: 250?. recommended mounting hole detail a follows, pg 168. vswr rf leakage plating part no. (ghz) (db) 1.06 + .01f ?90-fghz) passivated stainless steel 1059637-1 recommended mounting detail b or e follows, pg 168. note: pa rt numbers are rohs compliant except: indicates non-rohs compliant.
168 catalog 1307191 dimensions are in millimeters dimensions are shown for usa: 1-800-522-6752 south america: 55-11-2103-6000 revised 3-07 and inches unless otherwise reference purposes only. canada: 1-905-470-4425 hong kong: 852-2735-1628 specified. values in brackets specifications subject mexico: 01-800-733-8926 japan: 81-44-844-8013 www.tycoelectronics.com are standard equivalents. to change. c. america: 52-55-1106-0803 uk: 44-8706-080-208 rf coax connectors osp miniature modular blind mate connectors (continued) hermetically sealed (continued) field replaceable solder and braze-in (continued) panel feedthrough jack receptacle recommended mounting hole detail 10.7 [.421] dia. dia. 5.6 0.13 [.220 .005 ] 0.5 0.03 [.020 .001 ] + 0.05 ?0.03 + .002 ] ?.001 4.0 [.158 glass seal dia. dia. 5.5 0.03 [.218 .001 ] 1.7 0.03 [.066 .001 ] 6.4 [.250] ref. panel 2-hole flange mount plug receptacle with emi/rfi gasket ?0.5 [.018] dia. contact detail a* dia. 5.5 0.03 [.218 .001 ] ref. panel 6.4 0.08 [.250 .003 ] dia. + .000 ?0.05 + .000 ?.002 4.1 .162 ] [ detail b* (6.35 [.250] panel thickness) 2.6 0.03 [.102 .001 ] dia. 3.2 0.13 [.125 .005 ] panel 12.2 [.481] ref. detail c* 2.9 0.03 [.115 .001 ] dia. 3.2 0.13 [.125 .005 ] panel 12.2 [.481] ref. detail d* dia. 5.5 0.03 [.218 .001 ] 3.2 0.03 [.125 .001 ] ref. panel 7.6 0.08 [.300 .003 ] dia. + .000 ?0.03 + .000 ?.001 4.1 .162 ] [ detail e* 9.5 [.375] 6.4 [.250] dia. dia. dia. 8.0 0.13 [.315 .005 ] 0.5 0.03 [.018 .001 ] + 0.05 ?0.03 + .002 ] ?.001 2.8 [.112 6.6 [.260] 12.2 [.481] 15.9 [.625] dia. 2 plcs. 2.6 [.102] *consult appropriate instruction sheet for complete mounting details. vswr rf leakage plating part no. (ghz) (db) 1.06 + .01f ?90-fghz) passivated stainless steel 1059671-1 recommended mounting detail b or e follows at bottom of this page. vswr rf leakage plating part no. (ghz) (db) 1.06 + .01f ?90-fghz) passivated stainless steel 1059572-1 recommended mounting detail d follows at bottom of this page. note: pa rt numbers are rohs compliant except: indicates non-rohs compliant.
169 catalog 1307191 dimensions are in millimeters dimensions are shown for usa: 1-800-522-6752 south america: 55-11-2103-6000 revised 3-07 and inches unless otherwise reference purposes only. canada: 1-905-470-4425 hong kong: 852-2735-1628 specified. values in brackets specifications subject mexico: 01-800-733-8926 japan: 81-44-844-8013 www.tycoelectronics.com are standard equivalents. to change. c. america: 52-55-1106-0803 uk: 44-8706-080-208 rf coax connectors ossp subminiature modular blind mate connectors engineering data impedance 50 ohms frequency dc to 28.0 ghz t emperature rating -65 to 125 c electrical rg 405 (.085) semi-rigid vswr 1.05 + .01f (ghz) rf transmission loss .040 x -- f (ghz) insulation resistance 5,000 megohms min. contact resistance center contact 6.0 milliohms max. outer contact 3.0 milliohms max. outer contact to cable 0.5 milliohms max. dielectric withstanding voltage 675 volts rms corona extinction voltage at 70,000 ft. 250 volts min. rf high potential at 5 mhz 675 volts rms rf leakage interface only -(90-fghz) db min. (fully mated) power handling 300w at 3 ghz (sea level) and room temperature environmental corrosion method 101, condition b, mil-std-202 vibration method 204, condition d, 20gs, mil-std-202 shock method 213, condition i, 100gs, mil-std-202 t emperature cycling method 107, condition b, mil-std-202 moisture resistance method 106, mil-std-202 material housing corrosion resistant steel type 303 (stainless) per astm a484 and a582 center contact beryllium copper per astm-b-196 dielectric tfe fluorocarbon per astm-d-1457 gasket (o?ing) mil-p-25732 mechanical force to engage 3 pounds max. force to disengage 1.5 pounds max. center contact retention 4 pounds min. durablilty 1,000 cycles radial misalignment rigid mount ?06 [?0025] float mount ?51 [?020] mating characteristics jack connector center contact socket oversize test pin .533 + .003 [.0210 + .0001] dia. t est pin finish 16 micro inch max. insertion depth .76/1.14 [.030/.045] number of insertions 3 insertion force test pin .528 + .003 [.0208 + .0001] dia. t est pin finish 16 micro inch insertion force 3 pounds max. withdrawal force test pin .495 + .003 [.0195 - .0001] dia. t est pin finish 16 micro inch max. insertion depth 1.27/1.91 [.050/.075] withdrawal 1/2 ounce min. finish center contact gold plate per mil-g-45204, type ii, class 0 over nickel plate per qq-n-290, class 2 or passivate per astm-a380 housing gold plate per mil-g-45204, type ii, class 0 over nickel plate per qq-n-290, class 2 or passivate per astm-a380 product facts subminiature version of osp blind mate connectors for space savings family of connectors and adapters ossp connectors are a sub- miniature version of the osp blind mate series. connectors in this series incorporate the design ele- ments of the osp interface including the float and mis- mate features. ossp blind mates are about 40% smaller than osp connec- tors and are designed to be used in applications where space is at a premium. a complete family of ossp connectors and adapters is available including cable connectors, fixed and float mount panel connectors and hermetic connectors. rigid mount units will func- tion to specifications up to .064 [.0025] radial mis- alignment with the mating plug connector. applications requiring greater than .064 [.0025] radial misalignment can use either the float design or floating connector plates with guide pins.
170 catalog 1307191 dimensions are in millimeters dimensions are shown for usa: 1-800-522-6752 south america: 55-11-2103-6000 revised 3-07 and inches unless otherwise reference purposes only. canada: 1-905-470-4425 hong kong: 852-2735-1628 specified. values in brackets specifications subject mexico: 01-800-733-8926 japan: 81-44-844-8013 www.tycoelectronics.com are standard equivalents. to change. c. america: 52-55-1106-0803 uk: 44-8706-080-208 rf coax connectors ossp subminiature modular blind mate connectors (continued) interface mating dimensions the connector interface, specifically designed for multiple interconnects, maintains reliable perform- ance over the typical mechanical tolerance r equired in cost effective packaging. the interface test data shows excellent perform- ance is maintained with mat- ing gaps up to .015 inch. jack plug dimensions description abcdef jack 1.22 nom. 3.91 min. 5.33 ref. 5.00 nom.* 3.35 max. 3.23 max.* 0.48 .154 .210 .197 .132 .127 plug 1.22 nom. 3.56 nom. 5.33 ref. 5.00 min. 0.51 nom. 3.25 min. 0.48 .140 .210 .199 .020 .128 *with spring bottomed.
171 catalog 1307191 dimensions are in millimeters dimensions are shown for usa: 1-800-522-6752 south america: 55-11-2103-6000 revised 3-07 and inches unless otherwise reference purposes only. canada: 1-905-470-4425 hong kong: 852-2735-1628 specified. values in brackets specifications subject mexico: 01-800-733-8926 japan: 81-44-844-8013 www.tycoelectronics.com are standard equivalents. to change. c. america: 52-55-1106-0803 uk: 44-8706-080-208 rf coax connectors ossp subminiature modular blind mate connectors (continued) for semi-rigid cable, direct solder attachment bulkhead feedthrough cable plug ?rear mount dia. 17.5 [.690] 3.0 [.120] dia. min. 2.3 [.089] max. 7.3 [.289] dia. 4.6 0.03 [.180 .001 ] d e + 0.03 ?.000 + .001 ?.000 4.6 .182 dia. [. [ ] recommended mounting hole cable plating part no. rg 405/u, 2.16 gold 1059857-1 [.085] cable part no. rg 405/u, 2.16 1059868-1 [.085] finish: inner housing that is soldered to cable is gold plated. outer housing is passivated stainless steel. when using semi-rigid cable, it is recommended that a service loop be used to facilitate the float features of the connector. cable part no. rg 405/u, 2.16 1059874-1 [.085] flange mount cable jack floating rear mount feedthrough snap-in dia. 18.0 [.710] 3.0 [.120] 7.6 [.300] 11.0 [.435] dia. 14.7 [.580] dia. 2 plcs. dia. 2.3 [.089] dia. 2.4 [.093] + 0.08 ?0.00 + .003 ?.000 7.1 [.281 ] dia. + 0.00 ?0.05 + .000 ?.002 7.1 [.280 ] ded ole dia. 5.5 [.217] 11.0 0.10 [.435 .004 ] + 0.08 ?0.00 + .003 ?.000 7.1 [.281 ] dia. + 0.00 ?0.05 + .000 ?.002 7.1 [.280 ] recommended mounting hole dia. 11.4 [.450] ref. 7.6 [.300] dia. max. 3.0 [.120] dia. 6.1 [.240] dia. compression spring connector retaining clip recommended mountin g hole + 0.08 ?0.00 + .003 ?.000 7.1 [.280 ] + 0.05 ?0.00 + .002 ?.000 6.5 [.256 ] 12.7 [.500] ref. 18.0 [.710] 14.7 [.570] note: pa rt numbers are rohs compliant except: indicates non-rohs compliant.
172 catalog 1307191 dimensions are in millimeters dimensions are shown for usa: 1-800-522-6752 south america: 55-11-2103-6000 revised 3-07 and inches unless otherwise reference purposes only. canada: 1-905-470-4425 hong kong: 852-2735-1628 specified. values in brackets specifications subject mexico: 01-800-733-8926 japan: 81-44-844-8013 www.tycoelectronics.com are standard equivalents. to change. c. america: 52-55-1106-0803 uk: 44-8706-080-208 rf coax connectors ossp subminiature modular blind mate connectors (continued) for flexible cable, crimp attachment bulkhead feedthrough cable plug ?rear mount ref. 33.0 [1.298] dia. 4.6 0.03 [.180 .001 ] d + 0.03 ?.000 + .001 ?.000 4.6 [.182 dia. 4 [.1 recommended mounting hole ] cable plating part no. rg 188/u, 316 double passivated stainless steel 1059884-1 braided only rg 174/u, 188/u, 316u p assivated stainless steel 1059886-1 flange mount cable jack ? floating rear mount dia. 35.6 [1.40] max. 7.6 [.300] 11.0 [.435] dia. 14.7 [.580] dia. 2 plcs. 2.4 [.093] + 0.08 ?0.00 + .003 ?.000 .1 81 ] dia. + 0.00 ?0.05 + .000 ?.002 7.1 [.280 ] dia. 5.5 [.217] 11.0 0.10 [.435 .004 ] + 0.08 ?0.00 + .003 ?.000 7.1 [.281 recommended mounting hole ] d + 0.00 ?0.05 + .000 ?.002 7.1 [.280 ] cable plating part no. rg 188/u, 316 double passivated stainless steel 1059888-1 braided only rg 174/u, 188/u, 316u p assivated stainless steel 1059887-1 feedthrough snap-in cable jack part no. 1059889-1 35.6 [1.400] max. dia. 6.1 [.240] 22.4 0.38 [.880 .015 ] dia. mounting hole + 0.05 ?0.00 + .002 ?.000 6.5 [.256 ] dia. mounting hole + 0.08 ?0.00 + .003 ?.000 7.1 [.280 ] compression s p rin g ossp jack connector retaining clip note: pa rt numbers are rohs compliant except: indicates non-rohs compliant.
173 catalog 1307191 dimensions are in millimeters dimensions are shown for usa: 1-800-522-6752 south america: 55-11-2103-6000 revised 3-07 and inches unless otherwise reference purposes only. canada: 1-905-470-4425 hong kong: 852-2735-1628 specified. values in brackets specifications subject mexico: 01-800-733-8926 japan: 81-44-844-8013 www.tycoelectronics.com are standard equivalents. to change. c. america: 52-55-1106-0803 uk: 44-8706-080-208 rf coax connectors ossp subminiature modular blind mate connectors (continued) for panel mount press-fit panel feedthrough plug receptacle part no. 1059901-1 4.0 0.03 [.156 .001 ] straight knurl o-ring recommended mounting hole + 0.08 ?0.00 + .003 ?.000 4.0 [.159 ] + 0.00 ?0.05 + .000 ?.002 3.9 [.154 ] + 0.05 ?0.00 + .002 ?.000 11.4 [.450 ] 6.4 [.250] 5.1 [.200] 5.3 0.05 [.210 .002 ] ossp plug 0.9 0.03 [.034 .001 ] 0.4 0.03 [.015 .001 ] threaded panel feedthrough plug receptacle, straight t erminal 11.4 [.450] 6.4 [.250] dia. 0.4 [.015] dia. 1.2 [.049] dia. dia. 4.0 [.156] 4.1 0.03 [.162 .001 ] 5.3 0.05 [.210 .002 ] dia. 1.3 0.03 [.051 .001 ] recommended mounting hole plating part no. pa ssivated stainless 1059903-1 steel note: pa rt numbers are rohs compliant except: indicates non-rohs compliant.
174 catalog 1307191 dimensions are in millimeters dimensions are shown for usa: 1-800-522-6752 south america: 55-11-2103-6000 revised 3-07 and inches unless otherwise reference purposes only. canada: 1-905-470-4425 hong kong: 852-2735-1628 specified. values in brackets specifications subject mexico: 01-800-733-8926 japan: 81-44-844-8013 www.tycoelectronics.com are standard equivalents. to change. c. america: 52-55-1106-0803 uk: 44-8706-080-208 rf coax connectors straight plug receptacle captured contact part no. 1059919-1 o-ring mounting surface recommended mounting hole 5 plcs. hol e typ. typ. + 0.08 ?0.00 + .003 ?.000 1.7 [.067 ] 5.1 [.200] 4 plcs. sq. typ. 1.0 [.040] 8.7 [.343] 12.6 [.498] ossp plug 5.1 [.200] 5.1 [.200] 6.4 [.250] sq. 0.9 [.034] right-angle plug receptacle part number 1484546-1 o-ring recommended mounting hole 5 plcs. hol e typ. typ. + 0.08 ?0.00 + .003 ?.000 1.7 [.067 ] 5.08 [.200] 4 plcs. sq. 1.02 [.040] 5.08 0.51 [.200 .020 ] 5.11 0.03 [ .201 .001 ] 17.78 0.25 [.700 .010 ] 5.84 [.230] 5.08 [.200] typ. 5.08 [.200] 6.35 [.250] sq. 0.86 [.034] 14.61 [.575] ossp subminiature modular blind mate connectors (continued) for printed circuit board mount note: pa rt numbers are rohs compliant except: indicates non-rohs compliant.
ossp subminiature modular blind mate connectors (continued) hermetically sealed metal to metal formable gasket ? panel feedthrough plug receptacle 12.1 [.475] 1.0 [.039] dia. 3.0 [.118] dia. 3.6 [.140] dia. .03 [.012] dia. vswr rf leakage plating part no. (ghz) (db) 1.06 + .01f ?85-fghz) gold 1059905-1 recommended mounting hole detail a at bottom of this page. solder and braze-in panel feedthrough plug receptacle 8.2 [.322] ref. 5.3 [.210] dia. dia. dia. + 0.00 ?0.05 + .000 ?.002 4.8 [.189 ] 0.5 0.03 [.020 .001 ] vswr rf leakage plating part no. (ghz) (db) 1.06 + .01f ?85-fghz) gold 1059902-1 recommended mounting hole detail b at bottom of this page. field replaceable solder and braze-in 2-hole flange mount plug receptacle with emi/rfi gasket recommended mounting hole detail for hermetically sealed 9.5 [.375] 5.3 [.210] dia. dia. dia. 8.2 0.13 [.322 .005 ] 0.3 0.03 [.012 .001 ] dia. + 0.05 ?0.03 + .002 ] ?.001 1.9 [.076 5.7 [.223] 9.0 [.353] 12.2 [.480] dia. 2 plcs. 2.4 [.093] vswr rf leakage plating part no. (ghz) (db) 1.06 + .01f ?85-fghz) passivated stainless steel 1059894-1 recommended mounting hole detail c at bottom of this page. dia. 3.2 0.03 [.121 .001 ] ref. dia. + .003 ?0.05 + .001 ?.002 4.1 [.162 ] dia. + .000 ?0.03 + .000 ?.001 1.0 [.041 ] 6.4 [.250] detail a* 2.5 [.100] r 0.08 [.003] max. + 0.03 ?0.00 + .001 ?.000 4.8 [.190 ] + 0.08 ?0.00 + .003 ?.000 0.8 [.031 ] + 0.08 ?0.03 + .003 ?.001 r 0.13 [.005 ] + 0.05 ?0.03 + .002 ?.001 5.5 [.218 ] detail b* detail c* *consult appropriate instruction sheet for complete mounting procedure. 2.0 0.03 [.078 .001 ] dia. 3.2 0.13 [.125 .005 ] panel 9.0 [.353] ref. 175 catalog 1307191 dimensions are in millimeters dimensions are shown for usa: 1-800-522-6752 south america: 55-11-2103-6000 revised 3-07 and inches unless otherwise reference purposes only. canada: 1-905-470-4425 hong kong: 852-2735-1628 specified. values in brackets specifications subject mexico: 01-800-733-8926 japan: 81-44-844-8013 www.tycoelectronics.com are standard equivalents. to change. c. america: 52-55-1106-0803 uk: 44-8706-080-208 rf coax connectors note: pa rt numbers are rohs compliant except: indicates non-rohs compliant.
176 catalog 1307191 dimensions are in millimeters dimensions are shown for usa: 1-800-522-6752 south america: 55-11-2103-6000 revised 3-07 and inches unless otherwise reference purposes only. canada: 1-905-470-4425 hong kong: 852-2735-1628 specified. values in brackets specifications subject mexico: 01-800-733-8926 japan: 81-44-844-8013 www.tycoelectronics.com are standard equivalents. to change. c. america: 52-55-1106-0803 uk: 44-8706-080-208 rf coax connectors smb connectors product facts smb offers snap-fit coupling for quick connect/disconnect choice of commercial or high rel connectors 50 and 75 ? mil-type connectors available straight plugs and jacks are completely crimp terminated fast easy cable assembly low vswr standard military, commer- cial or tyco electronics tooling listed under the component program of underwriters laboratories inc., file no. e81956 pc board soldered connec- tors are recognized under the component program of underwriters laboratories inc., file no. e81956 certified by canadian standards association file no. lr 7189 r r r smb connectors are avail- able in commercial and high rel versions. they are ideally suited for circuit miniaturization and are offered in a wide range of configurations including plugs, right-angle plugs, jacks, bulkhead jacks and adapters, as well as printed circuit board and solder jacks. te r mination costs are kept to a minimum using plugs and jacks with a crimp cen- ter contact and hex crimp outer braid. both hand held tooling and pneumatic bench-mounted tooling is available. easily assembled right-angle plugs have a hex crimp on the outer braid ferrule and bifurcated solder center contacts. t yco electronics?75 ohm bt 43 smb connectors feature unique spring mating with snap-fit couplings for quick connect/disconnect. these connectors are designed to be intermateable with 75 ohm smb mil-c-39012 connectors. they also fea- ture reliable dual crimp cable terminations. packaging all connectors are packaged individually unless otherwise noted under the ?ilitary no. and/or comments?column in the connector specifications chart. between series adapters for smb between series adapters, please see pages 251-260.
smb connector specifications electrical characteristics impedance ?50 ohms and 75 ohms, nominal frequency range ?0 to 4.0 ghz v oltage rating (vrms) sea level 70,000 feet 50 ohm connectors for rg 178/u series cable 300 75 50 ohm connectors for rg 316/u series cable 400 100 75 ohm connectors for rg 179/u series cable 300 75 75 ohm connectors for rg 195/u series cable 500 125 insulations resistance ?1000 megohms min. contact resistance ?(milliohms max.) after initial environment center contact 6.0 8.0 outer contact 1.0 1.5 braid to body 1.0 n/a contact current rating ?1.5 amps dc max. v oltage standing wave ratio (vswr0 ? to 4.0 ghz or 80% of upper cutoff frequency of the cable, whichever is lower. mating engagement cable straight right-angle rg 178/u series 1.30 + .04f 1.45 + .06f rg 316/u series 1.25 + .04f 1.35 + .04f f=ghz, does not apply to 75 ohm connectors. rf high potential withstanding voltage frequency ?5 mhz leakage current ?n/a 50 ohm connectors for rg 178/u series cable 675 vrms 50 ohm connectors for rg 316/u series cable 950 vrms 75 ohm connectors for rg 179/u series cable 950 vrms 75 ohm connectors for rg 195/u series cable 1225 vrms rf leakage ??5 db min. at 2-3 ghz insertion loss ?.30db max. at 3 ghz mechanical characteristics engagement forces ?14 lbs. [62.3 n] maximum engagement initially. after 500 matings, 14 lbs. [62.3 n] maximum engagement and 2 lbs. [8.8 n] minimum disengagement for all of smbs. cable attachment ? straight connectors ?crimp, both center contact and braid right-angle connectors ?crimp on braid and bifurcated solder center contact durability ?500 cycles per mil-c-39012 contact captivation ?when captivated, the contacts will withstand 4.0 lbs. minimum axial force. cable retention ?when properly assembled to the compatible braided coaxial cable, the retention is equal to the breaking strength of the cable. marking ?per mil-std-130 environmental characteristics t emperature rating ??5? to +165? corrosion (salt spray) ?mil-std-202, method 101, test condition b, 5% salt solution vibration high frequency ?mil-std-202, method 204, test condition b (15 gs) shock ?mil-std-202, method 213, test condition b, 75 gs at 6 milliseconds, 1 2 sine thermal shock ?mil-std-202, method 107, test condition b, except high tem- perature shall be +85?. high temperature shall be +200? for connectors using 200? cables. moisture resistance ?mil-std-202, method 106, when interface gasket is used. no measurements of high humidity. insulation resistance shall be 200 megohms minimum within five minutes after removal from humidity. durability test ?conducted per mil-c-39012 reg. para. 3.15, method para. 4.6.12 materials body, body components and male contacts ?brass, half hard, per qq-b-626, alloy 360, zinc per qq-z-363 female contacts ?beryllium copper per qq-c-530, heat treated per mil-h-7199 insulators ?tfe fluorocarbon per astm d 1710, type 1, grade 1 lockwashers ?phosphor bronze per qq-b-750 crimp ferrule ?annealed copper alloy per ww-t-799 gaskets ?silicone rubber per zz-r-765, class 11b, grade 65-75 plating center contacts ?0.00127 [.000050] min. gold per mil-g-452048 type 1, grade c, class 1, over 0.00254 [.000100] min. nickel per qq-n-290 other metal parts ?gold, nickel or solder plated to meet the finish and corrosion requirements of mil-c-39012 177 catalog 1307191 dimensions are in millimeters dimensions are shown for usa: 1-800-522-6752 south america: 55-11-2103-6000 revised 3-07 and inches unless otherwise reference purposes only. canada: 1-905-470-4425 hong kong: 852-2735-1628 specified. values in brackets specifications subject mexico: 01-800-733-8926 japan: 81-44-844-8013 www.tycoelectronics.com are standard equivalents. to change. c. america: 52-55-1106-0803 uk: 44-8706-080-208 rf coax connectors
178 catalog 1307191 dimensions are in millimeters dimensions are shown for usa: 1-800-522-6752 south america: 55-11-2103-6000 revised 3-07 and inches unless otherwise reference purposes only. canada: 1-905-470-4425 hong kong: 852-2735-1628 specified. values in brackets specifications subject mexico: 01-800-733-8926 japan: 81-44-844-8013 www.tycoelectronics.com are standard equivalents. to change. c. america: 52-55-1106-0803 uk: 44-8706-080-208 rf coax connectors smb connectors, 50 ohm straight plugs right-angle plugs 6.35 [.250] dia. 6.35 [.250] max. 21.10 [.830] max. 13.21 [.520] max. 13.71 [.540] max. 6.35 [.250] dia. 13.71 [.540] max. 13.21 [.520] max. die cast mil type rg/u center outer other part cable contact contact metal parts dielectric style no. plating plating plating 178, 178a, 178b, 196, 196a gold gold nickel teflon mil type 413985-6 gold gold gold teflon mil type 413985-1 gold gold nickel teflon mil type 413985-3 174, 316, gold nickel nickel teflon mil type 413985-7 188, 188a gold gold nickel teflon die cast 414946-1 gold nickel nickel teflon die cast 5414946-2 179, 179a, 179b, gold gold nickel teflon mil type 1-413985-1 161, 187, 187a, gold gold nickel teflon die cast 5414946-5 belden 9221 gold nickel nickel teflon die cast 5414946-6 gold gold gold teflon mil type 413985-2 rg 316, gold gold nickel teflon mil type 413985-4 188 double braid gold gold nickel teflon die cast 5414946-3 gold nickel nickel teflon mil type 413985-8 rg/u center outer other part cable contact contact metal parts dielectric style no. plating plating plating gold gold gold teflon mil type 414002-7 178, 178a, 178b, gold gold nickel teflon mil type 414002-8 196, 196a gold gold nickel teflon die cast 5414363-8 gold gold gold teflon mil type 414002-1 174, 316, 188, 188a gold gold nickel teflon mil type 414002-3 179, 179a, 179b gold nickel nickel teflon mil type 414002-5 161, 187, 187a gold gold nickel teflon die cast 5414363-3 belden 9221 gold nickel nickel teflon die cast 5414363-5 gold gold gold teflon mil type 414002-2 rg 316, gold gold nickel teflon mil type 414002-4 188 double braid gold gold nickel teflon die cast 5414363-4 note: pa rt numbers are rohs compliant except: indicates non-rohs compliant. belden is a trademark of belden wire and cable company. teflon is a trademark of e.i. dupont de nemours and company.
smb connectors, 50 ohm (continued) straight jacks bulkhead jack adapter (jack-jack) commercial jack die cast brass 5.56 [.219] hex. 5/4.88 dia. [.197/.192] 2.08/2.01 [.082/.079] maximum panel thickness 2.36 [.093] recommended panel cutout f or bulkhead jack and adapter 25.40 [1.000] 6.35 [.250] hex. 17.53 [.690] max. rg/u center body jack cable contact plating dielectric style part no. plating 178, 178a, 178b, 196, 196a gold nickel teflon mil type 5414170-2 174, 316, gold nickel teflon mil type 5414170-1 188, 188a gold nickel teflon die cast 414948-1 rd 316, 188 double braid gold nickel teflon commercial 414948-3 center t ype contact body dielectric style part no. plating plating gold nickel teflon mil type 228553-1 jack-to-jack gold gold teflon mil type 228553-2 mil type jack bulkhead jacks 6.35 [.250 ] hex. 28.60 [1.120] center bulkhead rg/u contact body jack. cable plating plating dielectric style part no. 174, 316, gold nickel teflon commercial 5415006-1 188,188a gold nickel teflon commercial 5228217-1 rd 316, 188 double braid gold nickel teflon commercial 5415006-2 179 catalog 1307191 dimensions are in millimeters dimensions are shown for usa: 1-800-522-6752 south america: 55-11-2103-6000 revised 3-07 and inches unless otherwise reference purposes only. canada: 1-905-470-4425 hong kong: 852-2735-1628 specified. values in brackets specifications subject mexico: 01-800-733-8926 japan: 81-44-844-8013 www.tycoelectronics.com are standard equivalents. to change. c. america: 52-55-1106-0803 uk: 44-8706-080-208 rf coax connectors note: pa rt numbers are rohs compliant except: indicates non-rohs compliant. teflon is a trademark of e.i. dupont de nemours and company.
180 catalog 1307191 dimensions are in millimeters dimensions are shown for usa: 1-800-522-6752 south america: 55-11-2103-6000 revised 3-07 and inches unless otherwise reference purposes only. canada: 1-905-470-4425 hong kong: 852-2735-1628 specified. values in brackets specifications subject mexico: 01-800-733-8926 japan: 81-44-844-8013 www.tycoelectronics.com are standard equivalents. to change. c. america: 52-55-1106-0803 uk: 44-8706-080-208 rf coax connectors smb connectors, 50 ohm (continued) pc board v ertical jacks pc board v ertical plugs a b jacks center body dim. dim. part t ype contact dielectric style plating plating a b no. 7.62 3.94 gold gold .300 .155 teflon mil type 413990-1 7.62 3.94 gold nickel .300 .155 teflon mil type 413990-2 10.16 2.54 teflon mil type 414612-2 gold nickel .400 .100 gold tin 3.94 8.25 teflon brass, 5221111-1 .155 .325 max. stamped plugs center body dim. dim. recommended part t ype contact dielectric pc board style plating plating a b layout no. low profile (plug) gold nickel 3.94 7.62 teflon b mil type 415774-1 mated pair .155 300 a b recommended pc board layout 2.54 [.100] 5.08 [.200] 5.08 [.200] 1.60 [.063] 4 plcs. 1.19 [.047] 0.97 0.03 [.038 .001 ] 11.53 0.20 [.454 .008 ] 3.94 0.13 [.155 .005 ] 6.35 [.250] 6.32 [.249] 0.64 [.025] 1.02 0.05 [.040 .002 ] 5.08 0.05 [.200 .002 ] 1.42 [.056] typ. 6.35 [.250] sq. typ. recommended pc board layout 1.60 [.063] 1.19 [.047] 5.08 [.200] 2.54 [.100] 4 plcs. note: pa rt numbers are rohs compliant except: indicates non-rohs compliant. teflon is a trademark of e.i. dupont de nemours and company.
smb connectors, 50 ohm (continued) 13.46 [.530] dia. 6.35 [.250] a b plugs center interface pcb dim. dim. recommended part contact body leg dielectric style pc board plating plating plating ab layout no. 8.76 2.79 gold nickel nickel teflon .345 .110 die cast b 415380-1* 8.76 3.94 gold nickel tin teflon .345 .155 die cast a 5414338-1 * 5 leg design recommended pc board layouts 5.08 [.200] 2.54 [.100] 5.08 [.200] 1.24 dia. [.049] min. 1.75 dia. [.069] min. (4 holes) a b 1.24 0.05 [.049 .002 ] 2.54 [.100] 5.08 [.200] 5.08 [.200] 1.75 [.069] 4 plcs. c 2.54 [.100] 5.08 [.200] 5.08 [.200] 1.32 [.052] 5 plcs. 12.70 [.500] a b a b 13.46 [.530] jack with standoff pads jack low profile jacks center interface pcb dim. dim. recommended part t ype contact body leg dielectric style pc board plating plating plating ab layout no. 7.11 3.94 gold gold gold teflon .280 .155 mil type a 413996-2 low profile 7.11 3.94 gold nickel nickel teflon .280 .155 mil type a 413996-4 7.11 2.79 gold gold gold teflon .280 .110 die cast a 415340-1 8.76 2.79 gold gold gold teflon .345 .110 die cast a 415672-1 8.51 3.94 gold gold gold teflon .335 .155 mil type a 414026-2 8.76 3.94 gold nickel nickel teflon .345 .155 mil type a 414026-3 with 8.76 3.94 standoff pads gold nickel tin-lead teflon .345 .155 die cast a 5414337-1 8.76 2.79 gold nickel nickel teflon .345 .110 die cast b 5415379-1* 8.51 3.94 gold nickel nickel teflon .335 .155 die cast a 415381-1 7.67 2.79 bulkhead gold gold gold teflon .302 .110 die cast a 414963-1 9.78 3.94 brass, commercial gold nickel tin polypropylene .385 .155 stamped c 5228435-1 7.67 2.79 bulkhead gold gold gold teflon .302 .110 die cast a 1274330-1 * 5 leg design pc board, right-angle jacks a b 19.87 [.782] bulkhead jack pc board, right-angle plug 181 catalog 1307191 dimensions are in millimeters dimensions are shown for usa: 1-800-522-6752 south america: 55-11-2103-6000 revised 3-07 and inches unless otherwise reference purposes only. canada: 1-905-470-4425 hong kong: 852-2735-1628 specified. values in brackets specifications subject mexico: 01-800-733-8926 japan: 81-44-844-8013 www.tycoelectronics.com are standard equivalents. to change. c. america: 52-55-1106-0803 uk: 44-8706-080-208 rf coax connectors note: pa rt numbers are rohs compliant except: indicates non-rohs compliant. teflon is a trademark of e.i. dupont de nemours and company.
182 catalog 1307191 dimensions are in millimeters dimensions are shown for usa: 1-800-522-6752 south america: 55-11-2103-6000 revised 3-07 and inches unless otherwise reference purposes only. canada: 1-905-470-4425 hong kong: 852-2735-1628 specified. values in brackets specifications subject mexico: 01-800-733-8926 japan: 81-44-844-8013 www.tycoelectronics.com are standard equivalents. to change. c. america: 52-55-1106-0803 uk: 44-8706-080-208 rf coax connectors smb connectors, 50 ohm (continued) 5/4.88 [.197/.192] dia. 2.08/2.01 [.082/.079] maximum panel thickness 2.36 [.093] recommended panel cutout bulkhead pc board jack, solder receptacle kits smb receptacle jack center body kit t ype contact dielectric style part plating plating no. front mount gold nickel teflon mil type 228216-1* rear mount gold nickel teflon mil type 228215-1* *includes jam nut and lockwasher center body t ype contact dielectric style part no. plating plating front mount gold nickel teflon mil type 414895-1 lockwasher and jam nut part no. 415001-2 part no. 414969-2 kit includes lockwasher and jam nut 6.35 [.250] 3.71 [.146] 16.0 [.630] max. hex. 3.68 [.145] 6.99 [.275] dia. 0.97 0.13 [.038 .001 ] dia. ref. plane hex 10-32 unef-2a 4.45 [.175] 3.18 [.125] 2.92 [.115] 1.02 [.040] 3.45 [.136] 6.35 [.250] note: pa rt numbers are rohs compliant except: indicates non-rohs compliant. teflon is a trademark of e.i. dupont de nemours and company.
smb connectors, mini 75 ohm product facts industry standard for minia- ture 75 ohm smb smb offers snap-fit coupling for quick connect/disconnect suitable for high density applications fast easy cable assembly low vswr connectors offer consistent mating and unmating forces straight plugs and jacks are completely crimp termi- nated low cost mini 75 ohm smb connec- tors are ideally suited for circuit miniaturization in communication, broadband and switching equipment as well as a variety of other applications. they offer the same low consistent mating/unmating force as tyco electronics standard smb products and therefore, outer contact r esistance values are main- tained from connector to connector. standard military, commer- cial or tyco electronics tool- ing can be used to terminate these products. cost effective assembly of the straight plugs is com- pleted with a crimp center contact and hex crimp on the outer braid. right-angle plugs have a hex crimp on the outer braid ferrule and bifurcated solder center contacts. electrical characteristics impedance ?75 ohms frequency range ?0 to 4.0 ghz insulation resistance ?1000 megohms contact current rating ?1.5 amps dc max. mechanical characteristics engagement forces initial?4.0 lbs. [62.3 n] maximum engagement. after 500 matings, 14.0 lbs. [62.3 n] maximum engagement. durability?00 cycles environmental characteristics t emperature rating ?-65? to +165? 183 catalog 1307191 dimensions are in millimeters dimensions are shown for usa: 1-800-522-6752 south america: 55-11-2103-6000 revised 3-07 and inches unless otherwise reference purposes only. canada: 1-905-470-4425 hong kong: 852-2735-1628 specified. values in brackets specifications subject mexico: 01-800-733-8926 japan: 81-44-844-8013 www.tycoelectronics.com are standard equivalents. to change. c. america: 52-55-1106-0803 uk: 44-8706-080-208 rf coax connectors
184 catalog 1307191 dimensions are in millimeters dimensions are shown for usa: 1-800-522-6752 south america: 55-11-2103-6000 revised 3-07 and inches unless otherwise reference purposes only. canada: 1-905-470-4425 hong kong: 852-2735-1628 specified. values in brackets specifications subject mexico: 01-800-733-8926 japan: 81-44-844-8013 www.tycoelectronics.com are standard equivalents. to change. c. america: 52-55-1106-0803 uk: 44-8706-080-208 rf coax connectors smb connectors, mini 75 ohm (continued) rg cable center contact outer contact body part no. plating plating plating 179, 187 gold nickel nickel 5415484-1 179, 187 gold gold nickel 5415484-2 rd 179 gold gold nickel 5415484-3 rg cable center contact outer contact body part no. plating plating plating 179, 187 gold gold nickel 5415487-1 179, 187 gold nickel nickel 5415487-2 rd 179 gold nickel nickel 5415487-3 rg cable center contact body part no. plating plating 179, 187 gold nickel 415500-1 6.35 [.250] 1.73 [.068] 2.64 [.104] 17.78 [.700] ref. 9.78 0.25 [.385 .010 ] 13.7 [.539] max. 16.0 [.630] ref. 6.35 [.250] 10.21 [.402] ref. 22.86 [.900] max. 6.35 [.250] hex. 10.92 [.430] 9.7 [0.38] 3.66 0.05 [.144 .002 ] 4.52 [.178] 5.03 [.198] recommended pc board layout straight plug right-angle plug bulkhead jack note: pa rt numbers are rohs compliant except: indicates non-rohs compliant.
smb connectors, mini 75 ohm (continued) leg center contact body part no. length plating plating 2.11 .083 gold gold flash 415504-2 3.05 .120 gold gold 415504-3 3.05 .120 gold gold flash 415504-4 leg center contact body part no. length plating plating 2.79 .110 gold gold 415490-1 2.79 .110 gold nickel 415490-2 2.11 .083 gold gold 415490-3 2.11 .083 gold nickel 415490-4 leg center contact body part no. length plating plating 2.79 .110 gold nickel 415377-1 2.79 .110 gold gold 415377-2 2.79 .110 gold gold 415377-5 * *isolated. v ertical pc board jacks 7.62 0.18 [.300 .007 ] 3.67 [.145] max. 5.08 0.08 [.200 .003 ] 5.08 0.08 [.200 .003 ] 0.71 0.08 [.028 .003 ] 1.32 0.08 [.052 .003 ] 4 plcs. 2.54 0.08 [.100 .003 ] recommended pc board layout 7.95 0.25 [.313 .010 ] 5.54 [.218] 3.18 [.125] 3.71 [.146] max. 14.1 [.555] 5.08 0.08 [.200 .003 ] 5.08 0.08 [.200 .003 ] 0.71 0.08 [.028 .003 ] 1.32 0.08 [.052 .003 ] 4 plcs. 2.54 0.08 [.100 .003 ] recommended pc board layout 4.50 [.177] 3.71 [.146] 2.79 [.110] 19.94 [.785] 2.36 [.093] panel thickness max. max. 11.18 [.440] 5.08 0.08 [.200 .003 ] 5.08 0.08 [.200 .003 ] 0.71 0.08 [.028 .003 ] 1.32 0.08 [.052 .003 ] 4 plcs. 2.54 0.08 [.100 .003 ] recommended pc board layout right-angle pc board jacks right-angle pc board bulkhead jacks 185 catalog 1307191 dimensions are in millimeters dimensions are shown for usa: 1-800-522-6752 south america: 55-11-2103-6000 revised 3-07 and inches unless otherwise reference purposes only. canada: 1-905-470-4425 hong kong: 852-2735-1628 specified. values in brackets specifications subject mexico: 01-800-733-8926 japan: 81-44-844-8013 www.tycoelectronics.com are standard equivalents. to change. c. america: 52-55-1106-0803 uk: 44-8706-080-208 rf coax connectors note: pa rt numbers are rohs compliant except: indicates non-rohs compliant.
186 catalog 1307191 dimensions are in millimeters dimensions are shown for usa: 1-800-522-6752 south america: 55-11-2103-6000 revised 3-07 and inches unless otherwise reference purposes only. canada: 1-905-470-4425 hong kong: 852-2735-1628 specified. values in brackets specifications subject mexico: 01-800-733-8926 japan: 81-44-844-8013 www.tycoelectronics.com are standard equivalents. to change. c. america: 52-55-1106-0803 uk: 44-8706-080-208 rf coax connectors smb connectors, 75 ohm bt 43 (smz) product facts widely used in data transmission and telecom- munication applications bt 43 connector developed from the smb range and feature snap-on and latch ing variant most bt 43 connectors are available as fully crimped connectors. bt 43 and 75 ? connectors available in solder and crimp versions the tyco electronics range of 75 ohm smb (smz) connectors are designed to meet the increasing demands of the t elecommunications market, and are designed in accordance with bs9210 f0022. specifications max working voltage (dc) ?500 v max proof voltage (dc) ?1.5 kv contact resistance (inner) ? 5 milliohm contact resistance (outer) ? 1 milliohm bodies and other parts ?brass female center contacts ? copper alloy male center contacts ? copper alloy outer contacts ?becu plating contacts and critical surfaces ?gold other parts ?nickel insulators ?p.t.f.e.
smb connectors, 75 ohm bt 43 (smz) (continued) cable type t ermination method body plating part no. inner outer rg 179b/u crimp crimp selective gold 1311097-1 bt2002 crimp crimp selective gold 1311098-1 straight plugs, snap-on 30.5 [1.20] 28.0 [1.10] 20.4 [0.80] 8.8 [0.35] assembled dia. straight plugs, latching, crimp/crimp 9.6 [0.38] 27.8 [1.09] 29.9 [1.18] assembly dia. cable type body plating part no rg 179b/u selective gold 1311099-1 bt2003 selective gold 1311100-1 bt2002 selective gold 1311101-1 bt2001 selective gold 1311696-1 bt3002, tzc75024 selective gold 1311102-1 rg 59b/u, selective gold 1313507-1 rg 140/u, urm90 187 catalog 1307191 dimensions are in millimeters dimensions are shown for usa: 1-800-522-6752 south america: 55-11-2103-6000 revised 3-07 and inches unless otherwise reference purposes only. canada: 1-905-470-4425 hong kong: 852-2735-1628 specified. values in brackets specifications subject mexico: 01-800-733-8926 japan: 81-44-844-8013 www.tycoelectronics.com are standard equivalents. to change. c. america: 52-55-1106-0803 uk: 44-8706-080-208 rf coax connectors note: pa rt numbers are rohs compliant except: indicates non-rohs compliant.
188 catalog 1307191 dimensions are in millimeters dimensions are shown for usa: 1-800-522-6752 south america: 55-11-2103-6000 revised 3-07 and inches unless otherwise reference purposes only. canada: 1-905-470-4425 hong kong: 852-2735-1628 specified. values in brackets specifications subject mexico: 01-800-733-8926 japan: 81-44-844-8013 www.tycoelectronics.com are standard equivalents. to change. c. america: 52-55-1106-0803 uk: 44-8706-080-208 rf coax connectors smb connectors, 75 ohm bt 43 (smz) (continued) right-angle socket, latching, solder/crimp 23.0 [0.91] 21.0 [0.83] 16.3 [0.64] 9.9 [0.39] ref. ref. ref. ref. cable type body plating part no rg 179b/u selective gold 1311106-1 bt2003 selective gold 1311698-1 bt3002, tzc75024 selective gold 1311111-1 rg 59b/u, rg 140/u selective gold 1313508-1 straight free plug, crimp/crimp 8.82 [0.35] 30.4 [1.20] assembled 20.2 [0.80] 5.60 [0.22] dia. cable type body plating part no rg 179b/u selective gold 1408041-1 right-angle socket, snap-on, solder/crimp 17.93 [0.71] 21.67 [0.85] 16.86 [0.66] max. 10.16 [0.40] max. max. max. cable type body plating part no rg 179b/u selective gold 1311103-1 bt3002, tzc75024 selective gold 1311104-1 note: pa rt numbers are rohs compliant except: indicates non-rohs compliant.
smb connectors, 75 ohm bt 43 (smz) (continued) straight bulkhead plug 30.8 [1.21] assembled max panel 28.5 [1.12] 10.8 [0.43] 5.6 [0.22] 7.5 [0.30] 8.4 [0.33] dia. 3.0 [0.12] mounting detail cable type t ermination method body plating part no. inner outer rg 179b/u crimp crimp selective gold 1311120-1 bt500b, bt2003, crimp crimp selective gold 1311701-1 bt2003a bt3002, tzc75024 crimp crimp selective gold 1311122-1 right-angle bulkhead plug, solder/crimp 20.4 [0.80] 21.5 [0.85] ref. 16.7 [0.66] ref. 10.1 [0.40] ref. cable type body plating part no rg 179b/u selective gold 1311115-1 7.50 [0.30] 8.00 [0.31] a/f 32.1 [1.26] assembled length 10.75 0.05 [0.42 .002 ] 9.50 0.10 [0.37 .004 ] panel cut out dia. cable type t ermination method body plating part no. inner outer 3m: 043, 031c, crimp crimp selective gold 1313511-1 cs4456, gore: gcx 189 catalog 1307191 dimensions are in millimeters dimensions are shown for usa: 1-800-522-6752 south america: 55-11-2103-6000 revised 3-07 and inches unless otherwise reference purposes only. canada: 1-905-470-4425 hong kong: 852-2735-1628 specified. values in brackets specifications subject mexico: 01-800-733-8926 japan: 81-44-844-8013 www.tycoelectronics.com are standard equivalents. to change. c. america: 52-55-1106-0803 uk: 44-8706-080-208 rf coax connectors note: pa rt numbers are rohs compliant except: indicates non-rohs compliant.
pc board plug 43/1d 6.20 [0.24] 0.90 [0.04] 11.4 [0.45] 3.80 [0.15] 5.08 [0.20] 5.08 [0.20] mounting detail 1.20 [0.05] dia. 1 hole dia. dia. dia. 4 holes 1.70 [0.07] body plating part no. selective gold 1311125-1 pc board plug 43/1e 13.2 [0.52] 5.08 [0.20] 5.08 [0.20] 1.20 [0.047] dia. 1 hole dia. 4 holes 1.70 [0.067] 9.5 [0.37] 6.5 [0.26] sq. 15.0 [0.59] mounting detail body plating part no. selective gold 1314103-1 190 catalog 1307191 dimensions are in millimeters dimensions are shown for usa: 1-800-522-6752 south america: 55-11-2103-6000 revised 3-07 and inches unless otherwise reference purposes only. canada: 1-905-470-4425 hong kong: 852-2735-1628 specified. values in brackets specifications subject mexico: 01-800-733-8926 japan: 81-44-844-8013 www.tycoelectronics.com are standard equivalents. to change. c. america: 52-55-1106-0803 uk: 44-8706-080-208 rf coax connectors smb connectors, 75 ohm bt 43 (smz) (continued) ddf plug, crimp/crimp 30.4 [1.20] assembled 27.9 [1.10] 10.3 [0.41] dia. cable type body plating part no rg 179b/u selective gold 1327083-1 bt2003 selective gold 1311117-1 bt2002 selective gold 1311700-1 b2001 selective gold 1313883-1 bt3002, tzc75024 selective gold 1311118-1 rg 59b/u, rg 140/u, selective gold 1313887-1 urm90 ddf plug, crimp/crimp cable type body plating part no rd179, 124431 (filotex), 1366 (orebro), k02253d-1, selective gold 1314422-1 k02253-2 (shuner) 27.8 [1.09] ref. ref. 7.54 [0.30] right-angle pc board plug 22.14 [.872] mounting detail panel cutout detail 5.08 [.200] 5.08 [.200] 2.54 [.100] 2.54 [.100] 14.00 [.551] 8.21 [.323] 5/16-32 unef min. 4 holes 3/8 across flats 6.22 [.245] 1.70 [.067] min. 1.20 [.047] 2.90 0.10 [.114 .004 ] 8.35 0.10 [.329 .004 ] pa rt no. 1314102-1 note: pa rt numbers are rohs compliant except: indicates non-rohs compliant.
smb connectors, 75 ohm bt 43 (smz) (continued) t ester 430a 37.4 [1.47] 11.1 [0.44] dia. 8.8 [0.35] dia. extraction tool 65a 100.0 [3.94] 10.0 [0.39] dia. body plating part no. selective plating 6-1311703-1 straight adapter plug-plug 17.0 [0.67] 8.7 [0.34] a/f 2.2 [0.09] max. panel 17.1 [0.67] 7.5 [0.30] 8.0 [0.31] 11.0 [0.43] dia. dia. mounting detail body plating part no. selective gold 1313364-1 selective gold 1311127-1 pa rt no. 1313364-1 part no. 1311127-1 part no. 1311164-1 191 catalog 1307191 dimensions are in millimeters dimensions are shown for usa: 1-800-522-6752 south america: 55-11-2103-6000 revised 3-07 and inches unless otherwise reference purposes only. canada: 1-905-470-4425 hong kong: 852-2735-1628 specified. values in brackets specifications subject mexico: 01-800-733-8926 japan: 81-44-844-8013 www.tycoelectronics.com are standard equivalents. to change. c. america: 52-55-1106-0803 uk: 44-8706-080-208 rf coax connectors note: pa rt numbers are rohs compliant except: indicates non-rohs compliant.
192 catalog 1307191 dimensions are in millimeters dimensions are shown for usa: 1-800-522-6752 south america: 55-11-2103-6000 revised 3-07 and inches unless otherwise reference purposes only. canada: 1-905-470-4425 hong kong: 852-2735-1628 specified. values in brackets specifications subject mexico: 01-800-733-8926 japan: 81-44-844-8013 www.tycoelectronics.com are standard equivalents. to change. c. america: 52-55-1106-0803 uk: 44-8706-080-208 rf coax connectors smb connector crimp tooling * daniels manufacturing corporation 6103 anno avenue orlando, florida 32809 note: equivalent military tool part numbers m22520/5-01 ?daniels hand tool hx4 m22520/5-33 ?daniels die set y136 m22520/5-37 ?daniels die set y138 m22520/5-41 ?daniels die set y140 m22520/5-03 ?daniels die set y196 m22520/2-01 ?daniels hand tool afm8 t elephone: 407-855-6161 f ax: 407-855-6884 50 ? /75 ? commercial connector tooling mil type connector tooling center contact crimp tooling braid crimp tooling center contact crimp tooling braid crimp tooling dies for mil-c- dies for mil-c- dies for rg/u t yco electronics 22520/2-01 tyco electronics 22520/5-01 daniels* daniels* selector t yco electronics daniels hex die cable pro-crimper t ool pro-crimper t ool hand positioner position pro-crimper hand across hand tool daniels* position hand tool daniels* hex tool number hand tool t ool flats number positioner number position crimp die number position 178, 178a, female-k699 female-k699 2.67 178b, 196, 58489-1 4 58489-1 a&b y624 afm8 4 58483-1 a hx4-1637 196a male-k727 male-k727 .105 double braid afm8 female-k699 4 58483-1 b hx4-1637 3.25 178, 196 male-k727 .128 174, 316 58489-1 female-k699 4 58489-1 a y444 afm8 female-k699 4 58483-1 b hx4-1637 3.25 188, 188a male-k727 male-k727 .128 double braid y196 3.84 174, 316, 58489-1 female-k699 4 58489-1 c afm8 female-k699 4 58483-1 c hx4-1637 188 location a .151 double braid y196 3.25 174, 316, 58489-1 male-k727 4 58489-1 c afm8 solder 58483-1 b hx4-1637 188 location a .128 179, 179a 179b, 161, 58489-1 female-k699 4 58489-1 a y444 afm8 female-k699 4 58483-1 b hx4-1637 3.25 187, 187a, .128 belden 9221 179, 179a 179b, 161, 58489-1 male-k727 4 58489-1 a y444 solder 58483-1 b hx4-1637 3.25 187, 187a, .128 belden 9221 180, 180a solder 58483-1 c hx4-1637 3.84 180b .151 mini smb 75 ohm 179, 187 female-k699 58483-1 b hx4-1637 solder 179, 187 center 58483-1 b hx4-1637 contact note: all 75 ohm smb connectors have a solder center contact. note: pa rt numbers are rohs compliant except: indicates non-rohs compliant. belden is a trademark of belden wire and cable company. daniels is a trademark of daniels manufacturing corporation.
193 catalog 1307191 dimensions are in millimeters dimensions are shown for usa: 1-800-522-6752 south america: 55-11-2103-6000 revised 3-07 and inches unless otherwise reference purposes only. canada: 1-905-470-4425 hong kong: 852-2735-1628 specified. values in brackets specifications subject mexico: 01-800-733-8926 japan: 81-44-844-8013 www.tycoelectronics.com are standard equivalents. to change. c. america: 52-55-1106-0803 uk: 44-8706-080-208 rf coax connectors smc connectors product facts three-piece designs fast, clean cable assembly connector bodies preassembled solderless termination no danger of heat damage center conductor and braid terminated with same tool low noise level miniature screw-on coupling teflon dielectric the smc connector is miniature and light-weight, especially designed for use in critical applications where limited space and vibration are of major concern. this connector is designed in accordance with the r equirements of specification mil-c-39012, class ii, category b to assure the highest standards of electrical and mechanical performance. it has a con- stant impedance of 50 ohms, a voltage rating of 350 volts and provides excellent operation at frequencies up to 10 ghz. it also has a threaded coupling and can be used with a wide range of miniature coaxial cable sizes including rg 174, 197, 187, 188 and 316. materials brass ?qq-b-626 beryllium copper ?qq-c-530 copper ?qq-c-576 teflon insulation ?mil-p-19468 plating gold ?mil-g-45204 electrical characteristics nominal impedance ?50 ohms w orking voltage ?335 volts rms frequency range ?0 to 10 ghz insulation resistance ?1000 megohms min. contact resistance ? outer contact ?1 milliohms center contact ? straight connectors ?6 milliohms right-angle connectors ? 12 milliohms dielectric withstanding voltage 1000 volts rms rf leakage ??0 db min., between 2 and 3 ghz rf insertion loss ? straight connectors ?0.25 db max. at 4 ghz right-angle connectors ?0.50 db max. at 4 ghz corona level ?250 volts min. at 70,000 ft [21 336 m] mechanical characteristics mating/unmating ?10-32 threaded coupling cable attachment ?crimp type, both center contact and braid coupling nut retention ? 35 lb [156 n] min. cable retention ?20 lb [89 n] min., gr-174 cable durability ?500 cycles per mil-c-39012 environmental characteristics t emperature range ? ?5? to +85? vibration ?mil-std-1344, method 2005, condition iv salt spray ?mil-std-1344, method 1001, condition b t emperature cycling ? mil-std-1344, method 1003, condition a (except low temperature is ?5?) teflon is a trademark of e.i. dupont de nemours and company.
194 catalog 1307191 dimensions are in millimeters dimensions are shown for usa: 1-800-522-6752 south america: 55-11-2103-6000 revised 3-07 and inches unless otherwise reference purposes only. canada: 1-905-470-4425 hong kong: 852-2735-1628 specified. values in brackets specifications subject mexico: 01-800-733-8926 japan: 81-44-844-8013 www.tycoelectronics.com are standard equivalents. to change. c. america: 52-55-1106-0803 uk: 44-8706-080-208 rf coax connectors smc connectors (continued) 26.00 [1.022] ref. 3.90 [.155] ref. smc plug reference plane cable ref. plane 9.50 [.375] ref. 13.80 [.545] hex. 5.50 [.218] hex. 5.90 [.234] pa rt no. 1060220-1 crimp 26.00 [1.022] ref. 3.90 [.155] ref. smc plug reference plane cable ref. plane 9.50 [.375] ref. 13.80 [.545] hex. 5.50 [.218] hex. 5.90 [.234] pa rt no. 1060221-1 crimp 16.90 [.667] ref. 5.50 [.218] hex. 5.90 [.234] hex. cable ref. plane ref. plane smc plug 3.90 [.155] ref. pa rt no. 1060163-1 clamp cable rg/u part no. attachment cable crimp 178, 178a, 178b 1060220-1 196, 196a crimp 174, 316 1060221-1 188, 188a clamp 174, 316 1060163-1 188, 188a bulkhead feedthrough cable jacks 19.80 [.780] assembled view 3.18 [.125] 6.35 [.250] 5.94 [.234] 4.37 [.172] recommended strip length suggested panel cutout 4.88?.00 [.192?.197] 2.01?.08 [.079?.082] max. contact ferrule nut hex. cable customer supplied lockwasher plug assembly cable rg/u part no. attachment cable crimp 174, 316 51751-1 188, 188a straight jacks 24.20 [.953] nom. 6.00 [.236] across flats clamp nut 10-32, unf-2a sub-assembl y cable rg/u part no. attachment cable clamp 174, 316 1311638-1 188, 188a note: pa rt numbers are rohs compliant except: indicates non-rohs compliant. straight plugs
195 catalog 1307191 dimensions are in millimeters dimensions are shown for usa: 1-800-522-6752 south america: 55-11-2103-6000 revised 3-07 and inches unless otherwise reference purposes only. canada: 1-905-470-4425 hong kong: 852-2735-1628 specified. values in brackets specifications subject mexico: 01-800-733-8926 japan: 81-44-844-8013 www.tycoelectronics.com are standard equivalents. to change. c. america: 52-55-1106-0803 uk: 44-8706-080-208 rf coax connectors smc connectors (continued) press-in panel jacks, straight terminal 3.50 [.138] 5.05 [.199] 1.00 [.039] 5.20 [.205] 4.50 [.177] 2.00 [.079] 16.50 [.650] 5.00 [.197] 0.90 [.035] pa rt no. 1460470-1 11.40 [.448] 7.40 [.293] 6.20 [.243] 1.30 [.050] 3.90 [.155] 3.20 [.125] ref. ref. plane 6.40 [.250] 1.00 [.038] sq. 5.10 [.200] typ. 2.50 [.100] typ. dia. 1.00 [.040] sq. 4 plcs. smc jack .190-32, unf-2a pa rt no. 1060256-1 right-angle cable plug 14.60 [.575] ref. 6.50 [.256] ref. 15.10 [.594] 6.40 [.250] 1.00 [.040] cable ref. plane ref. plane ref. ref. smc plug hex. 5.50 [.218] hex. 5.90 [.234] cable rg/u part no. attachment cable clamp 174, 316 1060183-1 188, 188a pc board jack receptacles straight 11.00 [.432] 3.90 [.152] 3.90 [.155] 0.50 [.020] ref. 14.20 [.563] 7.10 [.280] ref. 1.00 [.038] 5.10 [.200] 6.30 [.250] typ. 1.00 [.040] sq. typ. 1.80 [.070] typ. 1.80 [.070] typ. dia. smc jack .190-32, unf-2a pa rt no. 1060259-1 5.08 [.200] 1.30 [.051] 5.08 [ .200 ] 2.54 [.100] 2.54 [.100] 4 plcs. + 0.08 ?0.00 + .003 ? .000 1.70 [.067 ] rcommended pc board layout right-angle note: pa rt numbers are rohs compliant except: indicates non-rohs compliant.
196 catalog 1307191 dimensions are in millimeters dimensions are shown for usa: 1-800-522-6752 south america: 55-11-2103-6000 revised 3-07 and inches unless otherwise reference purposes only. canada: 1-905-470-4425 hong kong: 852-2735-1628 specified. values in brackets specifications subject mexico: 01-800-733-8926 japan: 81-44-844-8013 www.tycoelectronics.com are standard equivalents. to change. c. america: 52-55-1106-0803 uk: 44-8706-080-208 rf coax connectors mcx connectors product facts snap-on interface facilitates assembly conforms to cecc interface specifications for mcx 30% smaller than smb connectors surface mount tape and reel for high volume 50 and 75 ohm versions available t yco electronics mcx microminiature snap-on connectors offer an excel- lent blend of size, durability and performance for emerging applications in gps, automotive and wire- less communications. mcx connectors are 30% smaller than traditional snap-on smb connectors, offering greater packaging density and weight reduction. mcx connectors are mechani- cally robust with beryllium copper spring fingers rated at a minimum of 500 mating cycles. the snap-on inter- face facilitates assembly, eliminating the need for a threaded connection, and ensuring full engagement. the forces to engage and disengage have been opti- mized to ensure ease of mating as well as to prevent damage to pcb solder connections. mcx connec- tors are designed for broad band performance, dc-6 ghz, and can be utilized for future system upgrades without concerns for performance degradation. t yco electronics mcx connectors are fully mate- able with standard mcx connectors and conform to the cecc interface specifications. mcx connectors are avail- able in a broad range of standard configurations for commercial applications. t ape and reel packaging for mcx surface mount straight and right-angle pcb recep- tacles is available to facili- tate high volume pick and place manufacturing. mcx surface mount connectors are designed to withstand infrared reflow, convection and vapor phase soldering and provide a .254 [.010] standoff for optimal board cleaning. mcx plug and jack pcb receptacles also offer a direct board to board solution providing a nominal 7.11 [0.28] separation. between series adapters for mcx between series adapters, see pages 251-260.
mcx connectors (continued) general cecc 22220 para materials brass alloys uns c36000 (astm-b16) or c38500 per qq-b626, beryllium copper per astm b-196, ptfe fluorocarbon per astm-d-1710 finish center contacts: gold plated (astm-b488) over nickel plate (qq-n-290) outer contacts: gold plated (astm-b488) over nickel plate (oo-n-290) housings: nickel plated (qq-n-290), tin ( astm-b488) or gold plated ( astm-b488) all other metal parts shall be furnished so as to provide a connector which meets corrosion requirements of cecc 22220 para 4.6.10 design the design shall be such that the outline and interface dimensions shown in this catalog and the requirements of cecc 22220 para are met electrical cecc 22220 para (general requirements performance may vary by cable) f requency dc - 6 ghz nominal impedance 50 ohms v oltage rating 335 volts (vrms maximum) @ sea level vswr 4.4.1 1.25:1 maximum @ 4 ghz 1.35:1 maximum @ 6 ghz insulation resistance 4.4.4 10,000 megohms minimum insertion loss .1db maximum/1000 mhz dielectric withstanding voltage 4.4.5 1000 volts (vrms minimum) @ sea level contact resistance center contact 4.4.2 5.0 milliohms maximum outer contact 4.4.3 1.0 milliohms maximum corona 70,000 ft. 250 volts (vrms minimum) @ mhz rf high potential @ sea level 670 volts (vrms minimum) @ mhz contact current 1.5 adc max mechanical cecc 22220 para f orce to engage 4.5.4 15.5 n [3.4 lbs.] maximum f orce to disengage 8 ?20 n [1.8 ?4.5 lbs.] contact captivation 4.5.2 designed to maintain mcx interface when mating 10 n [2.2 lbs.] axial connector durability 4.7.1 500 insertion and withdrawal cycles environmental cecc 22220 para t emperature rating ?5?c + 165?c vibration 4.6.3 see cecc 22220 moisture resistance 4.6.4 see cecc 22220 corrosion 4.6.10 see cecc 22220 thermal shock 4.6.7 see cecc 22220 meets or exceeds requirements of cecc 22220. tyco electronics has design control and all data contained herein is subject to chan ge without notice. contact tyco electronics for specifications on other connector types. f e d dia. c dia. b a dia. g i dia. j dia. h dia. m l k n plug letter minimum maximum a 0.48 [.0189] 0.53 [.0208] b 2.00 [.0788] c 3.8 [.148] d 0.00 [.000] 0.30 [.0118] e 2.80 [.111] 3.20 [.125] f 4.15 [.164] g 2.80 [.111] jack letter minimum maximum h 1.98 [.077] i 3.42 [.135] 3.48 [.137] j 3.60 [.142] 3.75 [.147] k 2.30 [.091] 2.80 [.110] l 2.60 [.103] 2.80 [.110] m 4.00 [.158] 4.12 [.162] n 0.75 [.0296] 0.85 [.0334] specifications 197 catalog 1307191 dimensions are in millimeters dimensions are shown for usa: 1-800-522-6752 south america: 55-11-2103-6000 revised 3-07 and inches unless otherwise reference purposes only. canada: 1-905-470-4425 hong kong: 852-2735-1628 specified. values in brackets specifications subject mexico: 01-800-733-8926 japan: 81-44-844-8013 www.tycoelectronics.com are standard equivalents. to change. c. america: 52-55-1106-0803 uk: 44-8706-080-208 rf coax connectors
198 catalog 1307191 dimensions are in millimeters dimensions are shown for usa: 1-800-522-6752 south america: 55-11-2103-6000 revised 3-07 and inches unless otherwise reference purposes only. canada: 1-905-470-4425 hong kong: 852-2735-1628 specified. values in brackets specifications subject mexico: 01-800-733-8926 japan: 81-44-844-8013 www.tycoelectronics.com are standard equivalents. to change. c. america: 52-55-1106-0803 uk: 44-8706-080-208 rf coax connectors mcx connectors (continued) 12.00 [.472] 6.15 [.242] 7.92 [.312] ref. 5.00 [.197] 3.50 [.137] sq. mcx plug 16.3 [.642] ref. 5.00 [.197] dia. mcx plug right-angle cable plug, crimp straight cable plug, crimp cable plating part no. rg 178/u, 196/u nickel 1060869-1 rg 174/u, 188/u, 316/u nickel 1060872-1 gold 1060871-1 rd-316 nickel 1060875-1 gold 1060875-2 note: f or full crimp attachment consult tyco electronics at the numbers listed below. cable plating part no. rg 178/u, 196/u nickel 1329293-1 rg 188/u, 316/u nickel 1330723-1 rg 179/u, rg 187/u rd-316 nickel 1363301-1 gold 1363301-2 straight cable terminal, pc board, without center contact 4.00 [.157] a ref. b 5.80 [.228] dia. cable dim. a dim. b plating part no. 11.76 3.94 ni ckel 1060811-1 rg 174/u, .463 .155 gold 1060811-2 188/u, 316/u 10.74 2.92 .423 .115 gold 1060813-2 note: pa rt numbers are rohs compliant except: indicates non-rohs compliant.
mcx connectors (continued) bulkhead cable jack 17.0 [.669] 1.40 [.055] ref. 5.00 [.197] 4.90 [.193] min. 4.50 [.177] min. recommended mounting hole max panel thickness 4.80 [.189] dia. mcx jack cable plating part no. rg 188/u, rg 316/u nickel 1060883-1 5.00 [.197] 11.3 [.445] dia. mcx plug cable plating part no. rg 405/u [.085] gold 1060772-1 .047 gold 1060772-2 straight cable plug, direct solder attachment for semi-rigid cable 5.00 [.197] 11.9 [.469] mcx jack dia. cable plating part no. rg 405/u [.085] gold 1060774-1 .047 gold 1060774-2 straight cable jack, direct solder attachment for semi-rigid cable 199 catalog 1307191 dimensions are in millimeters dimensions are shown for usa: 1-800-522-6752 south america: 55-11-2103-6000 revised 3-07 and inches unless otherwise reference purposes only. canada: 1-905-470-4425 hong kong: 852-2735-1628 specified. values in brackets specifications subject mexico: 01-800-733-8926 japan: 81-44-844-8013 www.tycoelectronics.com are standard equivalents. to change. c. america: 52-55-1106-0803 uk: 44-8706-080-208 rf coax connectors note: pa rt numbers are rohs compliant except: indicates non-rohs compliant.
200 catalog 1307191 dimensions are in millimeters dimensions are shown for usa: 1-800-522-6752 south america: 55-11-2103-6000 revised 3-07 and inches unless otherwise reference purposes only. canada: 1-905-470-4425 hong kong: 852-2735-1628 specified. values in brackets specifications subject mexico: 01-800-733-8926 japan: 81-44-844-8013 www.tycoelectronics.com are standard equivalents. to change. c. america: 52-55-1106-0803 uk: 44-8706-080-208 rf coax connectors mcx connectors (continued) right-angle plug receptacle, direct solder attachment for semi-rigid cable 3.10 [.122] 7.00 [.276] 7.92 [.312] mcx plug 5.00 [.197] 3.48 [.137] 6.15 [.242] dia. cable plating part no. rg 405/u gold 1060787-1 plating part no. ni ckel 1061015-1 gold 1085221-1 ve rtical plug receptacle, pc board 0.97 [.038] 5.77 [.227] mcx plug 4.45 [.175] 3.94 [.155] dia. 6.00 [.236] sq. 5.08 [.200] typ. 0.91 [.036] sq. 4 plcs. 0.97 [.038] mcx jack 4.45 [.175] dia. 5.08 [.200] typ. 6.00 [.236] sq. a b 0.91 [.036] sq. 4 plcs. dim. a dim. b plating part no. 8.28 2.92 nickel 1060985-1 .326 .115 gold 1060984-1 9.30 3.94 nickel 1060989-1 .366 .155 gold 1330126-1 7.09 1.73 nickel 1060996-1 .279 .068 gold 1060995-1 ve rtical jack receptacle, pc board note: pa rt numbers are rohs compliant except: indicates non-rohs compliant.
mcx connectors (continued) 10.31 [.406] 4.45 [.175] 4.70 [.185] 1.68 [.066] 3.91 [.154] 4.57 [.180] ref. 0.97 [.038] dia. pin 6.35 [.250] mcx jack sq. a b 0.97 [.038] dia. 9.50 [.374] 6.50 [.256] 3.00 [.118] 6.00 [.236] sq. 5.08 [.200] typ. 0.91 [.036] sq. 4 plcs. mcx jack 8.70 [.342] 6.35 [.250] .580 [.023] 6.50 [.256] 4.50 [.177] min. 5.50 [.217] 2.50 [.098] mcx jack across flats lockwasher hex. 0.97 [.038] dia. dia. recommended mounting hole 4.90 [.193] dia. min. .190-56,uns-2a max. panel ve rtical end launch, pc board plating part no. tin 1061007-1 right-angle jack receptacle, pc board dim. a dim. b plating part no. 9.93 3.94 nickel 1061023-1 [.391] [.155] gold 1061022-1 7.72 1.73 nickel 1061027-1 [.304] [.068] gold 1061026-1 8.92 2.92 nickel 1061030-1 [.351] [.115] gold 1061029-1 jack receptacle, bulkhead feedthrough plating part no. ni ckel 1060960-1 gold 1060959-1 201 catalog 1307191 dimensions are in millimeters dimensions are shown for usa: 1-800-522-6752 south america: 55-11-2103-6000 revised 3-07 and inches unless otherwise reference purposes only. canada: 1-905-470-4425 hong kong: 852-2735-1628 specified. values in brackets specifications subject mexico: 01-800-733-8926 japan: 81-44-844-8013 www.tycoelectronics.com are standard equivalents. to change. c. america: 52-55-1106-0803 uk: 44-8706-080-208 rf coax connectors note: pa rt numbers are rohs compliant except: indicates non-rohs compliant.
202 catalog 1307191 dimensions are in millimeters dimensions are shown for usa: 1-800-522-6752 south america: 55-11-2103-6000 revised 3-07 and inches unless otherwise reference purposes only. canada: 1-905-470-4425 hong kong: 852-2735-1628 specified. values in brackets specifications subject mexico: 01-800-733-8926 japan: 81-44-844-8013 www.tycoelectronics.com are standard equivalents. to change. c. america: 52-55-1106-0803 uk: 44-8706-080-208 rf coax connectors mcx connectors (continued) 5.90 [.231] ref. 4.45 [.175] mcx jack 0.97 [.038] dia. 6.00 [.236] sq. 5.08 [.200] typ. 0.91 [.036] sq. 4 plcs. ve rtical jack receptacle, surface mount plating part no. tin 6061002-1 6061092-1 1 1 t ape and reel packaging. 900 connectors per reel (carrier width 16mm, carrier pitch 12mm). 6.50 [.256] 3.50 [.137] 0.97 [.038] 9.50 [.374] 6.50 [.256] dia. 6.00 [.236] sq. 5.08 [.200] typ. 0.91 [.036] sq. 4 plcs. mcx jack right-angle jack receptacle, surface mount plating part no. tin 6061035-1 tin 6061094-1 1 1 t ape and reel packaging. 750 con- nectors per reel (carrier width 24mm carrier pitch 12mm). recommended mounting pattern for microstrip line notes: 1. printed circuit board material: glass epoxy fr-4 or similar; rela- tive permittivity: 4.8, 1 oz. copper clad both sides. 2. these dimensions valid for 1.58 [.062] board thickness. 3. decimal inch equivalents are shown in parentheses for general information only. 1.78 [.070] 8.89 [.350] 2.54 [.100] 11.43 [.450] 5.08 [.200] 5.72 [.225] 2.54 [.100] 4.45 [.175] .953 [.375] 5.08 [.200] dia. pad 5 plcs. 1 oz. copper area free of solder mask 2.22 [.088] 4 plcs. .510 [.020] dia. via. 4 plcs. note: pa rt numbers are rohs compliant except: indicates non-rohs compliant.
ve rtical jack, pc board, 75 ohm plating part no. gold 1363106-1 6.4 [.252] 10.0 [.394] 5.99 [.236] 3.4 [.134] 0.7 [.026] dia. 9.4 [.370] 0.8 [.036] 4 plcs. 5.08 [.200] sq. 6.0 [.236] sq. sq. 2.54 [.100] 5.08 [.200] 1.3 [.051] thru 5 plcs. mcx connectors (continued) straight cable plug, crimp, 75 ohm cable plating part no. rg 179/u nickel 1362990-1 cable plating part no. rg 179/u nickel 1362991-1 right-angle cable plug, crimp, 75 ohm ve rtical plug, pc board, 75 ohm plating part no. ni ckel 1361169-1 17.5 [.687] 5.0 [.196] 12.4 [.490] 9.9 [.390] 7.9 [.312] 6.1 [.241] 6.86 [.270] 6.35 [.250] 0.71 [.028] 1.91 [.075] 6.0 [.236] 5.08 [.200] typ. typ. sq. sq. 2.54 [.100] 0.91 [.036] 4 plcs. typ. 203 catalog 1307191 dimensions are in millimeters dimensions are shown for usa: 1-800-522-6752 south america: 55-11-2103-6000 revised 3-07 and inches unless otherwise reference purposes only. canada: 1-905-470-4425 hong kong: 852-2735-1628 specified. values in brackets specifications subject mexico: 01-800-733-8926 japan: 81-44-844-8013 www.tycoelectronics.com are standard equivalents. to change. c. america: 52-55-1106-0803 uk: 44-8706-080-208 rf coax connectors note: pa rt numbers are rohs compliant except: indicates non-rohs compliant.
204 catalog 1307191 dimensions are in millimeters dimensions are shown for usa: 1-800-522-6752 south america: 55-11-2103-6000 revised 3-07 and inches unless otherwise reference purposes only. canada: 1-905-470-4425 hong kong: 852-2735-1628 specified. values in brackets specifications subject mexico: 01-800-733-8926 japan: 81-44-844-8013 www.tycoelectronics.com are standard equivalents. to change. c. america: 52-55-1106-0803 uk: 44-8706-080-208 rf coax connectors compression coax board-to-board connectors board-to-board rf connector series single connector product surface mount technology excellent price-to- performance ratio product facts single connector design no mating connectors needed a vailable in four sizes for varied board spacing: 14mm, 10mm, 6.65mm and 4mm large radial and axial misalignment: for positioning both boards and for gap between boards surface mount device for standard pick & place compatibility gold plated phosphor bronze and brass contacts, stainless steel springs mating directly on target board easy connection without risk of breaking soldering or connector when mating or unmating low applied material and assembly costs applications modular parallel board-to- board blindmate applications base station / sub station systems pda / pcs / cellular handset applications wireless communications systems (gsm, pcs, wcdma, umts) related product data internet ?http://tycoelectronics.com/products/rfcoax product specification/design objectives ?108-71060 t est report ?501-90021 sample kit ?1-1773441-3 specifications characteristic impedance ? 50 ohms frequency range ?up to 6 ghz return loss ??0db min.; up to 2.2 ghz (all misalignments) shielding effectiveness ? ?0 db min.; up to 2.2 ghz w orking voltage ?125 vac, 50 hz (at sea level) dielectric withstanding voltage 500 vac, 50 hz (at sea level) insulation resistance ? 100 megohms operating temperature ? ?0 to +125? mating force ?10 n durability ?25 cycles angle between boards ? 2 max. axial misalignment ? 1.0mm from nominal boards stacking height; 0.4mm, 0.3mm for shortest models (part numbers 619135 and 1658260) radial misalignment ? 0.8mm from center line in any direction vibration ?20 g between 58-500 hz (const. amplitude of 1.5 mm between 10-58 hz) h 2 max. target board base board pa rt number height ? 619127-1 14 1.0mm 619134-1 10 1.0mm 619135-1 6.65 0.4mm 1658260-1 4 0.3mm note: pa rt numbers are rohs compliant except: indicates non-rohs compliant.
205 catalog 1307191 dimensions are in millimeters dimensions are shown for usa: 1-800-522-6752 south america: 55-11-2103-6000 revised 3-07 and inches unless otherwise reference purposes only. canada: 1-905-470-4425 hong kong: 852-2735-1628 specified. values in brackets specifications subject mexico: 01-800-733-8926 japan: 81-44-844-8013 www.tycoelectronics.com are standard equivalents. to change. c. america: 52-55-1106-0803 uk: 44-8706-080-208 stax coax connectors product facts low cost, low height and high performance low insertion loss 0 to ?.5 db from 0 to 6 ghz vswr < 1.07 from 0 to 6 ghz wide working range of deflection long term reliability and durability surface mount/pick and place low board separation 2.5 mm t echnology can support board separations 1.5 mm easily modified free height no tooling required for height modifications modified prototype samples within 2 weeks t yco electronics?stax coax rf connector is the first surface mount rf board-to-board connector on the market that uses elastomeric connector technology to provide an economical means to achieve low board separa- tion while maintaining excellent rf signal integrity between pcbs. the connector uses laminated sections of conductive and non- conductive silicone that are tuned to provide a 50 ohm impedance line between mated substrates. the single piece construction of the stax coax rf connector eliminates some of the signal anomalies normally associated with mated pairs of metal contact coax connectors. the dimensional relationship of the inner and outer conductor is consistently maintained throughout the connector. with its metal holder, the stax coax rf connector can be surface mount soldered to the pcb. an additional metal smt holder aligns the connector to the mating pcb. if adequate pcb alignment is already maintained by other means, the stax rf connector may not need the additional mating receptacle and can become a blindmating connector. this has an additional advantage in space constrained mobile applications where very fine-pitch board-to-board connectors are also used. related product data internet ?www.elastomerictech.com www.tycoelectronics.com elastomeric technologies applications engineering ? phone: 1-800-989-stax ext. 4453 fax: 1-215-784-4522 e-mail: etiapplicationseng@tycoelectronics.com te c hnical documents ? qualification test report ?t r 368 rf performance report ?00266 electrical characteristics contact resistance ?< 50 m ? insulation resistance ?10 12 ? min. dielectric withstanding voltage (without breakdown or arcing) 1000 volt physical characteristics board separation ?2.5 mm 0.2 (std. part) pcb board area ?4.0 mm dia. t ypical clamping force ?see chart environmental characteristics operating temperature ? ?0? to +125? moisture ?0 to 100% rh rf coax connectors
206 catalog 1307191 dimensions are in millimeters dimensions are shown for usa: 1-800-522-6752 south america: 55-11-2103-6000 revised 3-07 and inches unless otherwise reference purposes only. canada: 1-905-470-4425 hong kong: 852-2735-1628 specified. values in brackets specifications subject mexico: 01-800-733-8926 japan: 81-44-844-8013 www.tycoelectronics.com are standard equivalents. to change. c. america: 52-55-1106-0803 uk: 44-8706-080-208 stax coax connectors (continued) rf coax connectors description part number stax smt coax connector assembly: 619229-1 consists of stax coax elastomer in round smt holder mating smt target holder: 619238-2 controls alignment between pcbs stax coax rf elastomer only: 1442004-1 used with customer furnished holder note: pa rt numbers are rohs compliant except: indicates non-rohs compliant. part number 619229-1 smt stax coaxial connector assembly 2.40 [.094] 2.50 0.20 [.098 .008 ] mated condition 4.00 [.157] conductive elastomer outer conductor conductive elastomer inner conductor non-conductive elastomer 2.40 [.094] 3.20 [.126] unmated 2.20 [.087] 0.40 [.016] 0.40 [.016] 0.55 [.022] center conductor dielectric material board outer conducto r solder ring solder mask 1.60 [.063] 3.20 [.126] 3.50 [.138] 4.30 [.169] pcb pattern part number 619238-2 smt mating target holder 5.00 [.197] 1.50 [.059] 0.55 [.022] center conductor dielectric material board outer conductor solder ring solder mask 1.60 [.063] 3.60 [.142] 4.20 [.165] 5.00 [.197] pcb pattern for mating target
207 catalog 1307191 dimensions are in millimeters dimensions are shown for usa: 1-800-522-6752 south america: 55-11-2103-6000 revised 3-07 and inches unless otherwise reference purposes only. canada: 1-905-470-4425 hong kong: 852-2735-1628 specified. values in brackets specifications subject mexico: 01-800-733-8926 japan: 81-44-844-8013 www.tycoelectronics.com are standard equivalents. to change. c. america: 52-55-1106-0803 uk: 44-8706-080-208 smt/quickgrip connectors product facts solderless cable te rmination 3.0 [.118] mated height excellent cable retention usable with flexible and semi-rigid micro-coaxial cables t ape and reel packaging t yco electronics revolution- ary smt/quickgrip product line is designed to meet the growing demand for a reli- able, low cost system for direct termination of coax to a printed circuit board (pcb). smt/quickgrip technology eliminates the r equirement to connectorize the coaxial cable, reduc- ing assembly times and, therefore, cost. the smt/quickgrip surface mount device occupies less pcb area than conventional through hole coaxial con- nectors. an innovative microstrip mounting pattern and cable receptacle design ensures excellent grounding and pcb reten- tion. the smt/quickgrip cable termination system stands a mere 3.0 [.118] off the board when mated, allowing for closer pitch/ spacing when designing a system. the smt/quickgrip design provides optimal cable retention for applica- tions where shock, vibra- tion, and/or cable flexure may be encountered. this unique rf design accepts both flexible and semi-rigid micro-coaxial cables while delivering exceptional rf performance up to 3ghz. these features make this system extremely versatile for design engineers and offer a reliable, cost effective alternative to direct solder- ing of cable to the pcb. the cable is inserted into the device by means of a sim- ple self-aligning hand tool, eliminating the requirement for skilled personnel. this system removes the possi- bility of damaged pcbs and cables which are common quality issues associated with direct solder, while pro- viding superior rf perform- ance. the smt/q uickgrip accommodates multiple cable insertions allowing easy replacement of cables for repairs. this receptacle is designed for high volume assembly using surface mount technology and is available in tape and reel packaging for pick and place board assembly. pre- stripped cables and inter- series cable pigtails are available as turnkey solu- tions for your application needs (i.e.: for use in multi-board applications, for connecting antennas to the pcb, or point to point trans- mission on the same pcb). the smt/quickgrip cable termination system is ideal for wireless surface mount applications in handsets, pagers and personal digital assistants (pda). the smt/quickgrip mechanical and electrical performance, coupled with its ease of use, ensure it to be a high quality, reliable solution for current and future interconnect needs. t yco electronics is an iso9001 certified manufac- turer and maintains an spc controlled manufacturing environment. please call your local sales or distribution office for additional information and qualification samples today. cable conductor cable dielectric cable braid cable jacket 6.4 [.250] ref. 3.2 [.120] ref. pwb 3.0 [.120] ref. pwb 3.0 [.120] ref. 2.1 [.083] ref. 1.3 1.26 1.22 1.18 1.14 1.1 0.3 0.6 0.9 1.2 1.8 2.1 2.4 2.7 3 frequency (ghz) vswr t ypical vswr using smt/quickgrip with omni-flex 200 cable rf coax connectors omni-flex 200 cable is a t yco electronics specified cable.
208 catalog 1307191 dimensions are in millimeters dimensions are shown for usa: 1-800-522-6752 south america: 55-11-2103-6000 revised 3-07 and inches unless otherwise reference purposes only. canada: 1-905-470-4425 hong kong: 852-2735-1628 specified. values in brackets specifications subject mexico: 01-800-733-8926 japan: 81-44-844-8013 www.tycoelectronics.com are standard equivalents. to change. c. america: 52-55-1106-0803 uk: 44-8706-080-208 rf coax connectors smt/quickgrip connectors (continued) general materials housing: polyphenylene sulfide (pps) contacts: copper alloy finishes contacts: gold plate over nickel electrical f requency range: dc - 3ghz impedance: usable with 50 & 75 ohm systems insertion loss: .08 ?hz dw v: 750 vrms vswr: 1.3:1@ 3ghz (omni-flex 200 and .047 [.002] semi-rigid) 1.4:1 @ 3ghz (.034 [.001] semi-rigid) mechanical connector durability: 5 mating cycles min. (receptacle only) t ape and reel packaging: 16 [.629] per eia-481 f orce to disengage by cam-out (grams): omni-flex 200 cable - 543 typical .034 [.001] semi-rigid - 852 typical .047 [.002] semi-rigid - 1066 typical environmental t emperature rating: ?0?(?0?) to 125?(257?) when mated with omni-flex 200 cable resistance to solder heat: infrared, convection, and vapor phase solderable (receptacle only). maximum reflow time/temperature not to exceed 260? for 3 minutes. cable information omni-flex 200 cable materials: fep flexible cable (200?) ja ck et: fluorinated ethylene propylene shield: silver plated copper wire, 44 awg, 90% min. coverage dielectric: ptfe (polytetrafluoroethylene) center conductor: silver plated copper clad steel, 30 awg minimum bend radius: 6.35 [.250] insertion loss (pvc and fep cable only): 1.3db/m, 0.4 db/ft. @ 500 mhz 2.0db/m, 0.5 db/ft. @ 1 ghz 3.0db/m, 0.9 db/ft. @ 2 ghz center conductor resistance: .26 ohms per foot average specifications strip dimensions t yco electronics omni-flex 200 cable part number 1407578-1 1.30 [.051] ref. leave jacket slug on to protect braid 0.87 [.034] or 1.19 [.047] ref. semi-rigid cable (.034 and .047) note: pa rt numbers are rohs compliant except: indicates non-rohs compliant. omni-flex 200 cable is a t yco electronics specified cable.
209 catalog 1307191 dimensions are in millimeters dimensions are shown for usa: 1-800-522-6752 south america: 55-11-2103-6000 revised 3-07 and inches unless otherwise reference purposes only. canada: 1-905-470-4425 hong kong: 852-2735-1628 specified. values in brackets specifications subject mexico: 01-800-733-8926 japan: 81-44-844-8013 www.tycoelectronics.com are standard equivalents. to change. c. america: 52-55-1106-0803 uk: 44-8706-080-208 rf coax connectors smt/quickgrip connectors (continued) recommended mounting pattern for microstrip line pick and place feature ground contact center contact 6.4 [.250] 0.5 [.020] 3.2 [.125] center contact terminal 3.0 [.120] 3.4 [.135] 0.6 [.025] 1.3 [.050] 1.3 [.050] circuit line ground pad area free of solder mask copper 0.5 [.020] 7.8 [.305] 2.5 [.100] 3.8 [.150] 1.3 [.050] 2.4 [.096] 3.4 [.133] 9.0 [.345] 1.3 [.050] 2.4 [.095] 1.5 [.058] via. 4.3 [.169] 2 plcs. 0.6 [.024] 2 plcs. 0.5 [.020] 5 plcs. 1.0 oz. [.0014] description part no. bulk packaged 100/bag 1085456-1 700 piece reel 1086008-1 2000 piece reel 1086009-1 1. printed wiring board material: glass epoxy fr-4 or similar, relative permittivity: 4.8, 1 oz. copper clad both sides. 2. these dimensions valid for 1.6 [.062] board thickness. part no. 1088313-1 cable insertion tool pc board mount receptacle note: pa rt numbers are rohs compliant except: indicates non-rohs compliant.
210 catalog 1307191 dimensions are in millimeters dimensions are shown for usa: 1-800-522-6752 south america: 55-11-2103-6000 revised 3-07 and inches unless otherwise reference purposes only. canada: 1-905-470-4425 hong kong: 852-2735-1628 specified. values in brackets specifications subject mexico: 01-800-733-8926 japan: 81-44-844-8013 www.tycoelectronics.com are standard equivalents. to change. c. america: 52-55-1106-0803 uk: 44-8706-080-208 rf coax connectors smt/quickgrip connectors (continued) inter-series cable assemblies sma straight plug length a 19.2 [.755] ref. sma bulkhead jack length a 21.3 [.837] ref. 6.00 [.235] min. 6.40 [.250] recommended mounting hole min. cable assembly length (a) part no. 100 [4] 1329174-1 omni-flex 200 200 [8] 1329174-2 305 [12] 1310432-1 note: 1. cable length tolerances: length ? mm [in], tolerance mm [in], 50 to 100 [3.94], 3 [ .12], 101 to 500 [3.98 to 19.69], 5 [ .20], over 500 [19.69], 10 [ .39] cable assembly length (a) part no. 100 [4] 1329175-1 omni-flex 200 200 [8] 1329175-2 305 [12] 1329175-3 note: 1. cable length tolerances: length ? mm [in], tolerance mm [in], 50 to 100 [3.94], 3 [ .12], 101 to 500 [3.98 to 19.69], 5 [ .20], over 500 [19.69], 10 [ .39] note: pa rt numbers are rohs compliant except: indicates non-rohs compliant. omni-flex 200 cable is a t yco electronics specified cable.
211 catalog 1307191 dimensions are in millimeters dimensions are shown for usa: 1-800-522-6752 south america: 55-11-2103-6000 revised 3-07 and inches unless otherwise reference purposes only. canada: 1-905-470-4425 hong kong: 852-2735-1628 specified. values in brackets specifications subject mexico: 01-800-733-8926 japan: 81-44-844-8013 www.tycoelectronics.com are standard equivalents. to change. c. america: 52-55-1106-0803 uk: 44-8706-080-208 rf coax connectors smt/quickgrip connectors (continued) smb bulkhead jack length a 17.1 [.675] ref. smb right-angle plug length a 12.7 [.500] ref. 10.8 [.427] 14.0 [.550] cable assembly length (a) part no. 100 [4] 1255378-4 omni-flex 200 200 [8] 1255378-5 305 [12] 1255378-6 note: 1. cable length tolerances: length ? mm [in], tolerance mm [in], 50 to 100 [3.94], 3 [ .12], 101 to 500 [3.98 to 19.69], 5 [ .20], over 500 [19.69], 10 [ .39] cable assembly length (a) part no. 100 [4] 1408050-4 omni-flex 200 200 [8] 1408050-5 305 [12] 1408050-6 note: 1. cable length tolerances: length ? mm [in], tolerance mm [in], 50 to 100 [3.94], 3 [ .12], 101 to 500 [3.98 to 19.69], 5 [ .20], over 500 [19.69], 10 [ .39] inter-series cable assemblies (continued) 4.40 [.172] 4.90 [.192] min. min. recommended mounting hole mcx bulkhead jack length a 16.8 [.662] ref. 4.80 [.189] 11.4 [.447] ref. 4.90 [.192] recommended mounting hole min. 4.50 [.177] min. min. cable assembly length (a) part no. 100 [4] 1408051-4 omni-flex 200 200 [8] 1408051-5 305 [12] 1408051-6 note: 1. cable length tolerances: length ? mm [in], tolerance mm [in], 50 to 100 [3.94], 3 [ .12], 101 to 500 [3.98 to 19.69], 5 [ .20], over 500 [19.69], 10 [ .39] mcx right-angle plug length a 10.8 [.425] ref. 7.90 [.312] 6.10 [.241] cable assembly length (a) part no. 100 [4] 1330401-4 omni-flex 200 200 [8] 1330401-5 305 [12] 1330401-6 note: 1. cable length tolerances: length ? mm [in], tolerance mm [in], 50 to 100 [3.94], 3 [ .12], 101 to 500 [3.98 to 19.69], 5 [ .20], over 500 [19.69], 10 [ .39] note: pa rt numbers are rohs compliant except: indicates non-rohs compliant. omni-flex 200 cable is a t yco electronics specified cable.
212 catalog 1307191 dimensions are in millimeters dimensions are shown for usa: 1-800-522-6752 south america: 55-11-2103-6000 revised 3-07 and inches unless otherwise reference purposes only. canada: 1-905-470-4425 hong kong: 852-2735-1628 specified. values in brackets specifications subject mexico: 01-800-733-8926 japan: 81-44-844-8013 www.tycoelectronics.com are standard equivalents. to change. c. america: 52-55-1106-0803 uk: 44-8706-080-208 rf coax connectors ssmt surface mount interconnect system microminiature surface mount rf connectors product facts 3.0 [.118] mated height excellent interface retention flexible micro-coax cable 360 degree mated rotation t ape and reel packaging available the tyco electronics ssmt surface mount interconnect system is designed to pro- vide superior electrical and mechanical performance for wireless communication applications. the ssmt system occupies less printed circuit board (pcb) r eal estate than conven- tional through hole coaxial connectors. an innovative microstrip mounting pattern and plug receptacle design ensure reliable grounding and pcb retention characteristics. the ssmt interconnect system allows closer pitch/spacing, standing 3.0 [.118] (fully mated height) off the board. the mated ssmt interface allows 360 degrees of ro tation providing maximum pcb design flexibility. it has been designed to pro- vide optimal retention for applications where shock, vibration or cable flexure may be encountered. force to disengage by cable load (cam-out) exceeds 300 grams. the ssmt system is designed to provide the performance of much larger industry standard connec- tors. the ssmt interconnect system consistently achieves broad band elec- trical performance through 6 ghz with a maximum vswr of 1.20:1 at 2 ghz. this broad band perform- ance establishes a reliable interface that can be utilized for future system upgrades without concern for perform- ance degradation. the ssmt utilizes a common plug receptacle, part num- ber 1251802-1, which is designed for high volume assembly using surface mount technology and is available in tape and reel packaging for automatic pick and place board assembly. the mating cable jack is available terminated to a highly flexible micro- coax cable as either a pigtail, jumper or standard interseries connector assem- bly to meet your needs. the ssmt interconnect system can be manually mated, facilitating high volume assembly and elimi- nating the need for special engagement tooling. the ssmt interface design aligns the center contacts prior to full mating to ensure a robust mechanical engagement. interface durability is rated at 100 mating cycles.
213 catalog 1307191 dimensions are in millimeters dimensions are shown for usa: 1-800-522-6752 south america: 55-11-2103-6000 revised 3-07 and inches unless otherwise reference purposes only. canada: 1-905-470-4425 hong kong: 852-2735-1628 specified. values in brackets specifications subject mexico: 01-800-733-8926 japan: 81-44-844-8013 www.tycoelectronics.com are standard equivalents. to change. c. america: 52-55-1106-0803 uk: 44-8706-080-208 rf coax connectors ssmt surface mount interconnect system (continued) general materials smt plug housing: polyphenylene sulfide (pps) contacts: copper alloy ssmt cable jack outer contact: beryllium copper inner contact: beryllium copper dielectric: polypropylene, gf finish plug and cable jack - contacts: gold plate over nickel plate electrical f requency dc - 6 ghz nominal impedance 50 ohms v oltage rating 250 volts (vrms maximum) @ sea level vswr (mated pair) 1.20:1 maximum @ 2 ghz 1.40:1 maximum @ 6 ghz insulation resistance 5000 megohms minimum dielectric withstanding voltage 500 volts (vrms minimum) @ sea level contact resistance (connectors only) center contact 15 milliohms maximum outer contact 10 milliohms maximum insertion loss (connectors only) .15db max. @ 6 ghz mechanical connector durability 100 mating cycles t ape/reel packaging (plug) 12mm per eia-481 f orce to engage 5.5 lbs. max. (3.5 lbs. typ.) f orce to disengage (2.0 lbs. typ.) 4.0 lbs. max. (2.0 lbs. typ.) f orce to disengage by 300 grams min. (800 grams typ. initial mate) cable load (camout) environmental t emperature rating (mated pair) ?0? (?0?) to +125? (257?) resistance to solder heat infrared, convection and vapor phase solderable (plug only). maximum reflow time/temperature not to exceed 260? for 3 minutes. cable specifications materials ja ck et: fep (polytetrafluoroethylene) shield: silver plated copper wire, 44 awg, 90% min. coverage dielectric: ptfe ( polytetrafluoroethylene) center conductor: silver plated copper clad steel, 30 awg minimum bend radius 6.35mm (.250 inch) insertion loss (cable only) 0.5 db/ft., 2.0 db/m @ 1 ghz 0.9 db/ft., 3.0 db/m @ 2 ghz center conductor resistance .25 ohms per foot average. 819 milliohm/meter nom.; 250 milliohm/ft. nom. dia. ref. outer jacket shield (braid) 1.3 [.052] dia. ref. 1.0 [.040] dia. ref. 0.8 [.030] dia. ref. 0.3 [.010] center conductor dielectric specifications
214 catalog 1307191 dimensions are in millimeters dimensions are shown for usa: 1-800-522-6752 south america: 55-11-2103-6000 revised 3-07 and inches unless otherwise reference purposes only. canada: 1-905-470-4425 hong kong: 852-2735-1628 specified. values in brackets specifications subject mexico: 01-800-733-8926 japan: 81-44-844-8013 www.tycoelectronics.com are standard equivalents. to change. c. america: 52-55-1106-0803 uk: 44-8706-080-208 rf coax connectors ssmt surface mount interconnect system (continued) straight smt pcb mount plug receptacle recommended mounting pattern for microstrip line right-angle jack to jack cable assembly 3.4 [.132] ref. 2.1 [.081] ref. ssmt jack 5.3 [.208] ref. 1.3 [.052] ref. cable 2.5 [.100] dia. ref. length a centerline to centerline 5.0 [.197] 1.0 [.039] 4 plcs. 4.5 [.177] 2.1 [.081] 4.0 [.157] 4.5 [.177] center contact terminal 0.4 [.015] 2.1 [.049] 3.0 [.118] 0.6 [.025] 0.5 [.020] 4 plcs. center contact (pin) outer contact center contact terminal ground terminal (3 plcs.) notes: 1. printed wiring board material: glass epoxy. fr-4 or similar, rela- tive permittivity: 4.8, 1 oz. copper clad both sides. 2. these dimensions valid for 1.6 [.062] board thickness. notes: 1. consult tyco electronics for non-standard cable lengths. length a tolerances. length a tolerance 50 to 100 [3.94] 3 [ .12] 101 to 500 [3.98 to 19.69] 5 [ .20] over 500 [19.69] 10 [ .39] 2. connector centerlines align 30 as shown for lengths of 165 [6.5] or less. cable assemblies over 165 [6.5] have r andomly aligned connectors. 9.0 [.354] 7.0 [.274] 6.0 [.236] 3.3 [.128] 0.5 [.019] 3.0 [.118] 0.5 [.020] via holes 3 plcs. 1.6 [.064] (see note 2) 1.2 [.047] 1.2 [.047] 0.6 [.024] 1.2 [.047] 5.3 [.207] 2.9 [.113] (see note 2) area free of solder mask 1 oz. [.0014] copper 1.2 [.047] 3.3 [.128] pa ck a ging quantity part no. bulk multiple of 100 1251802-1 178 dia. taping 800 pcs/reel 1083946-1 7.0 330 dia. taping 3000 pcs/reel 1055689-1 13.3 assembly length (a) part no. 100 [4.0] 1064524-1 200 [8.0] 1064530-1 305 [12.0] 1064533-1 note: pa rt numbers are rohs compliant except: indicates non-rohs compliant.
215 catalog 1307191 dimensions are in millimeters dimensions are shown for usa: 1-800-522-6752 south america: 55-11-2103-6000 revised 3-07 and inches unless otherwise reference purposes only. canada: 1-905-470-4425 hong kong: 852-2735-1628 specified. values in brackets specifications subject mexico: 01-800-733-8926 japan: 81-44-844-8013 www.tycoelectronics.com are standard equivalents. to change. c. america: 52-55-1106-0803 uk: 44-8706-080-208 rf coax connectors ssmt surface mount interconnect system (continued) right-angle jack to jack cable assembly (180 offset) 2.1 [.081] 5.3 [.208] length a centerline to centerline ref. 1.3 [.052] ref. cable ssmt jack 2.5 [.100] ref. assembly length (a) part no. 100 [4.0] 1082845-1 assembly length (a) part no. 100 [4.0] 1064535-1 200 [8.0] 1064538-1 305 [12.0] 1064540-1 510 [20.0] 1064542-1 notes: 1. consult tyco electronics for non-standard cable lengths. cable length tolerance: length a tolerances. length a tolerance 50 to 100 [3.94] 3 [ .12] 101 to 500 [3.98 to 19.69] 5 [ .20] over 500 [19.69] 10 [ .39] 2. to av oid damaging the cable, minimize time at temperature while soldering and/or applying heat to unterminated end of cable. notes: 1. consult tyco electronics for non-standard cable lengths. cable length tolerance: length a tolerances. length a tolerance 50 to 100 [3.94] 3 [ .12] 101 to 500 [3.98 to 19.69] 5 [ .20] over 500 [19.69] 10 [ .39] 2. to avoid damaging the cable, minimize time at temperature while soldering and/or applying heat to unterminated end of cable. right-angle jack cable pigtail 5.3 [.208] length a centerline to cable end ref. 2.5 [.100] dia. ref. 1.3 [.052] ref. cable ssmt jack 3.4 [.132] ref. 2.1 [.081] ref. note: pa rt numbers are rohs compliant except: indicates non-rohs compliant.
216 catalog 1307191 dimensions are in millimeters dimensions are shown for usa: 1-800-522-6752 south america: 55-11-2103-6000 revised 3-07 and inches unless otherwise reference purposes only. canada: 1-905-470-4425 hong kong: 852-2735-1628 specified. values in brackets specifications subject mexico: 01-800-733-8926 japan: 81-44-844-8013 www.tycoelectronics.com are standard equivalents. to change. c. america: 52-55-1106-0803 uk: 44-8706-080-208 rf coax connectors ssmt surface mount interconnect system (continued) inter-series cable assemblies sma straight plug reference plane to centerline length a dia. ref. cable 1.3 [.052] ref. 19.2 [.757] ref. ssmt right angle jack 2.1 [.081] ref. 3.4 [.132] dia. ref. 2.5 [.100] notes: 1. consult tyco electronics for non-standard cable lengths: length a tolerances. length a tolerance 50 to 100 (3.94) 3 ( .12) 101 to 500 (3.98 to 19.69) 5 ( .20) over 500 (19.69) 10 ( .39) 2. connectors are randomly aligned unless otherwise noted. note: 1064552-1 recommended for customer system verification. sma bulkhead jack hex. 7.9 [.312] dia. min. 5.4 [.250] 6.0 [.235] min. length a reference plane to centerline 1.3 [.052] dia. ref. cable ref. 21.3 [.839] ref. ssmt right angle jack recommended mounting hole 2.1 [.081] ref. 3.4 [.132] dia. ref. 2.5 [.100] max. panel thickness 3.2 [.125] assembly length (a) part no. 100 [4.0] 1064543-1 200 [8.0] 1064552-1 305 [12.0] 1064560-1 assembly length (a) part no. 100 [4.0] 1064544-1 200 [8.0] 1064553-1 305 [12.0] 1064561-1 hex. 6.4 [.250] hex. 7.9 [.312] 4.4 [.172] min. length a reference plane to centerline 1.3 [.052] dia. ref. cable ref. 17.1 [.675] 7.4 [.290] ref. ssmt right angle jack re mo 2.1 [.081] ref. 3.4 [.132] 2.5 [.100] dia. ref. max. panel thickness 2.4 [.093] smb bulkhead jack dia. min. 4.9 [.192] 4.4 [.172] min. ref. t k recommended mounting hole .1 81] assembly length (a) part no. 100 [4.0] 1064546-1 200 [8.0] 1064555-1 305 [12.0] 1064563-1 note: pa rt numbers are rohs compliant except: indicates non-rohs compliant.
217 catalog 1307191 dimensions are in millimeters dimensions are shown for usa: 1-800-522-6752 south america: 55-11-2103-6000 revised 3-07 and inches unless otherwise reference purposes only. canada: 1-905-470-4425 hong kong: 852-2735-1628 specified. values in brackets specifications subject mexico: 01-800-733-8926 japan: 81-44-844-8013 www.tycoelectronics.com are standard equivalents. to change. c. america: 52-55-1106-0803 uk: 44-8706-080-208 rf coax connectors ssmt surface mount interconnect system (continued) length a centerline to centerline 1.3 [.052] dia. ref. cable 12.7 [.500] ref. ref. ssmt right angle jack 2.1 [.081] ref. 3.4 [.132] 6.1 [.241] 7.9 [.312] dia. ref. 2.5 [.100] mcx right-angle plug ref. 101.6 [4.00] ssmt disengagement tool ssmt plug to sma jack adapter ref. 10.5 [.413] across flats ssmt plug sma jack 5.5 [.218] part no. 1221286-1 ssmt to sma between series adapters pa rt no. 1055696-1 ssmt jack to sma jack adapter ref. 12.9 [.508] across flats ssmt jack sma jack 5.5 [.218] ssmt jack to sma plug ref. 16.2 [.639] ssmt jack sma plug ssmt plug to sma plug adapter ref. 13.7 [.538] ssmt plug sma plug inter-series cable assemblies (continued) assembly length (a) part no. 100 [4.0] 1064550-1 200 [8.0] 1064559-1 305 [12.0] 1064567-1 slide horizontal to engage tool lift vertical to disengage connector press vertical to engage connector optional use of engagement/disengagement tool note: the ssmt disengagement tool can be utilized as an optional engagement tool versus manual hand installation. pa rt no. 1055695-1 part no. 1055694-1 part no. 1055697-1 length a reference plane to centerline 1.3 [.052] dia. ref. cable ref. 16.8 [.662] ref. ssmt right angle jack 2.1 [.081] ref. 3.4 [.132] 4.8 [.189] dia. ref. dia. 2.5 [.100] 11.4 [.447] 6.4 [.250] hex. recom mounti 6.4 [.250] max. panel thickness mcx bulkhead jack ref. 1 1] dia. min. 4.9 [.192] 4.5 [.177] recommended mounting hole min. assembly length (a) part no. 100 [4.0] 1064549-1 200 [8.0] 1064558-1 305 [12.0] 1064566-1 note: pa rt numbers are rohs compliant except: indicates non-rohs compliant.
218 catalog 1307191 dimensions are in millimeters dimensions are shown for usa: 1-800-522-6752 south america: 55-11-2103-6000 revised 3-07 and inches unless otherwise reference purposes only. canada: 1-905-470-4425 hong kong: 852-2735-1628 specified. values in brackets specifications subject mexico: 01-800-733-8926 japan: 81-44-844-8013 www.tycoelectronics.com are standard equivalents. to change. c. america: 52-55-1106-0803 uk: 44-8706-080-208 rf coax connectors mmcx microminiature snap-on connector series t yco electronics?micro- miniature snap-on connec- tors offer an excellent blend of size, durability and performance for emerging applications in gps, pcs, automotive and wireless communications. an exten- sion of the popular mcx series, mmcx connectors are 35% smaller, offering even greater packaging density and weight reduc- tion. mmcx connectors are rated to 500 mating cycles. the snap-on interface facili- tates assembly, eliminating the need for a threaded connection, and ensuring full engagement. the forces to engage and disen- gage have been optimized to ensure ease of mating as well as to prevent damage to pcb solder connections. mmcx connectors are designed for broadband performance, dc-6 ghz, and can be utilized for future system upgrades without concerns for per- formance degradation. the non-slotted outer con- tact provides for minimal rf leakage. mmcx surface mount connectors are designed to withstand infrared reflow, convection and vapor phase soldering. t yco electronics mmcx con- nectors are fully mateable with competitive mmcx product and conforms to the cecc interface specifica- tions. they are available in a broad range of standard configurations, including pcb and panel mount, flexi- ble and semi-rigid cable. t ape and reel packaging is available on surface mount product to facilitate high vol- ume manufacturing. other options can be reviewed as well, including additional cable sizes, and adapters. the mmcx connector series is a cost effective solution for the challenging demands of todays commercial mar- ketplace. it offers one of the smallest conventional crimp terminations without special tooling. call your local sales office or authorized distribu- tor for additional information or samples of the mmcx connector series. product facts snap-on interface facilitates assembly 35% smaller than mcx series designed for space saving applications up to 6 ghz conforms to cecc specifications surface mount tape and reel for high volume 8.80 [.347] ref. 16.62 [.655] ref. mmcx smb material and finish shells ?brass bodies ?brass , plated gold center contacts ? (male) ?brass, plated gold (female) ?beryllium copper, plated gold dielectrics ?ptfe electrical characteristics in accordance with cecc 22000 frequency ?dc ?6 ghz nominal impedance ?50 ohms v oltage rating ?170 volts (vrms max.) @ sea level vswr ?1.25 : 1 max. @ 6 ghz insulation resistance ? 1,000 megohms min. dielectric withstanding voltage 500 volts (vrms max.) @ sea level rf leakage ?-60 db min. @ 2.5 ghz contact resistance ? center contact ?5 milliohms max. outer contact ?1 milliohm max. mechanical characteristics in accordance with cecc 22000 connector durability ? 500 mating cycles force to engage ?18 newtons max. force to disengage ? 6 newtons max. center contact retention ? 10 newtons min. cable retention ? axial ?45 newtons min. rotational ?0.05 n-m min. environmental characteristics in accordance with cecc 22000, equivalent test conditions t emperature rating ? ?5 to +155? vibration ?mil-std-202, method 204, condition b shock ?mil-std-202, method 213, condition a moisture resistance ? mil-std-202, method 106 thermal shock ?mil-std-202, method 107, condition b note: p erformance specifications are typical, but may not apply to all connector types. related product data product specification ?108-2084 sample kit ?1654779
mmcx microminiature snap-on connector series (continued) cable part no. rg 405 1408313-1 2.7 [0.11] 1.45 [0.06] min. min. 0.25 [0.01] 2.6 [0.10] min. 1.05 [0.04] max. 2.4 [0.09] max. 2.41 [0.09] min. 3.5 [0.14] 1.6 [0.06] 0.4 [0.02] reference plane 0.7 [0.03] reference plane ref. mmcx interface dimensions plug jack semi-rigid cable ?direct solder attachment straight cable plug 3.5 [0.14] 11.5 [0.45] cable part no. rg 405 1408314-1 right-angle cable plug 7.0 [0.28] 3.5 [0.14] 5.3 [0.21] 4.0 [0.16] 6.5 [0.25] cable part no. rg 178, 196 1408148-1 captured center contact flexible cable ?crimp attachment straight cable plugs 3.5 [0.14] 11.5 [0.45] cable part no. rg 174, 1408312-1 188, 316 rd 316 1408312-2 captured center contact 3.8 [0.15 ] 15.9 [0.63] cable part no. rg 178, 196 1408149-1 rg 174, 188, 316 1408149-2 rd 316 1408149-3 captured center contact right-angle cable plug 7.0 [0.28] 3.5 [0.14] 5.3 [0.21] 4.0 [0.16] 11.9 [0.47] note: pa rt numbers are rohs compliant except: indicates non-rohs compliant. 219 catalog 1307191 dimensions are in millimeters dimensions are shown for usa: 1-800-522-6752 south america: 55-11-2103-6000 revised 3-07 and inches unless otherwise reference purposes only. canada: 1-905-470-4425 hong kong: 852-2735-1628 specified. values in brackets specifications subject mexico: 01-800-733-8926 japan: 81-44-844-8013 www.tycoelectronics.com are standard equivalents. to change. c. america: 52-55-1106-0803 uk: 44-8706-080-208 rf coax connectors
220 catalog 1307191 dimensions are in millimeters dimensions are shown for usa: 1-800-522-6752 south america: 55-11-2103-6000 revised 3-07 and inches unless otherwise reference purposes only. canada: 1-905-470-4425 hong kong: 852-2735-1628 specified. values in brackets specifications subject mexico: 01-800-733-8926 japan: 81-44-844-8013 www.tycoelectronics.com are standard equivalents. to change. c. america: 52-55-1106-0803 uk: 44-8706-080-208 rf coax connectors mmcx microminiature snap-on connector series (continued) 5.6 [0.22] 1.4 [.055] 1.6 [.063] 2.1 [.083] 0.8 [.031] 1.4 [.055] ground pad typ. signal pad part no. 1408150-1 printed circuit board straight jack receptacle part no. 1408151-1 right-angle jack receptacle 0.7 [.028] 3.8 [.150] 3.5 [.138] 6.8 [.268] 2.6 [.102] 4.75 [.187] 6.5 [.256] reference plane part no. 1408496-1 straight plug receptacle 0.70 [.028] 4.50 [.177] 3.50 [.138] 2.80 [.110] 7.50 [.296] part no. 1393757-7 surface mount straight jack receptacle 2.6 [0.10] 5.0 [0.20] 5.0 [0.20] pc board part no. 1393757-6 right-angle jack receptacle 2.6 [0.10] 5.0 [0.20] 5.0 [0.20] pc board 3.5 [0.14] 0.7 [0.03] 3.5 [0.14] 4.5 [0.18] 7.5 [0.30] 2.6 [0.10] reference plane 1.27 [.050] recommended mountin g holes 0.82 [.032] 2.54 [.100] typ. typ. 1.27 [.050] recommended mountin g holes 0.82 [.032] 2.54 [.100] typ. typ. 1.27 [.050] recommended mountin g holes 0.82 [.032] 2.54 [.100] typ. typ. recommended mounting pattern note: pa rt numbers are rohs compliant except: indicates non-rohs compliant.
mmcx microminiature snap-on connector series (continued) part no. 1408152-1 edge mount straight jack receptacle part no. 1408120-1 straight plug receptacle 2.8 [.110] 3.4 [.134] 3.5 [.138] 7.45 [.293] 7.40 [.291] 0.70 [.027] 4.50 [.177] 2.80 [.110] 2.80 [.110] 7.45 [.293] 7.40 [.291] 0.70 [.027] 4.50 [.177] 2.70 [.106] 4.60 [.181] 3.50 [.138] 4.50 [.177] 2.20 [.087] 7.50 [.296] 1.95 [.077] 1.10 [.043] signal pad ground pad typ. 4.50 [.177] 3.40 [.134] 3.50 [.138] 1.40 [.055] solder pad configuration only 4.60 [.181] 3.50 [.138] 4.50 [.177] 2.20 [.087] 7.50 [.296] 1.95 [.077] 1.10 [.043] signal pad ground pad typ. solder pad configuration only note: pa rt numbers are rohs compliant except: indicates non-rohs compliant. 221 catalog 1307191 dimensions are in millimeters dimensions are shown for usa: 1-800-522-6752 south america: 55-11-2103-6000 revised 3-07 and inches unless otherwise reference purposes only. canada: 1-905-470-4425 hong kong: 852-2735-1628 specified. values in brackets specifications subject mexico: 01-800-733-8926 japan: 81-44-844-8013 www.tycoelectronics.com are standard equivalents. to change. c. america: 52-55-1106-0803 uk: 44-8706-080-208 rf coax connectors
222 catalog 1307191 dimensions are in millimeters dimensions are shown for usa: 1-800-522-6752 south america: 55-11-2103-6000 revised 3-07 and inches unless otherwise reference purposes only. canada: 1-905-470-4425 hong kong: 852-2735-1628 specified. values in brackets specifications subject mexico: 01-800-733-8926 japan: 81-44-844-8013 www.tycoelectronics.com are standard equivalents. to change. c. america: 52-55-1106-0803 uk: 44-8706-080-208 rf coax connectors umcc ?ultraminiature coax connector and cable assembly series product facts ultra low profile (2.0 mm or 2.5 mm maximum mated height) easy snap on/off mating small footprint on pcb (3 mm x 3 mm) excellent performance to 6 ghz surface mount and reflow solderable a vailable on 0.80 mm and 1.37 mm dia. single shield, and 1.32 mm dia. double shield cable style a receptacles mate with hirose u.fl/u.fl(v) series connectors style b receptacles mate with murata gsc series connectors description extremely low profile surface mount technology 360 mated rotation excellent price-to- performance ratio applications wireless lan, mini pci mobile antenna/gps/ radio systems pda/pcs/cellular handset applications wireless communications systems (lan, gsm, pcs, wcdma, umts) remote measuring equipment electrical characteristics characteristic impedance ? 50 ohms frequency range ?dc to 6 ghz vswr (mated pair) ? 1.30 max. dc to 3 ghz 1.40 max. 3 to 6 ghz (cable dependent) insertion loss (connectors only) 0.24 db max. dc to 6 ghz rated voltage ? 60 vac (rms) ?standard receptacle (styles a, b) dielectric withstanding voltage 200 vac, 50 hz for 1 min. @ sea level insulation resistance ? 500 megohms min. contact resistance (connectors only) ? 20 milliohms max. (center) 10 milliohms max. (outer, plug) 10 milliohms max. (outer, receptacle) mechanical and environmental characteristics durability ? 30 cycles ?standard receptacle (styles a, b) disengagement force ? 2n min. perpendicular 4n min. orthogonal center contact retention force 0.15n min. t ape/reel packaging (receptacle) 12 mm carrier per eia-481 operating temperature ? ?0? to +90? material and finish shell ?phosphor bronze, plated gold or silver male center contact ?brass or phosphor bronze, plated gold female center contact ?brass or phosphor bronze, plated gold insulator (plug) ?pbt (15% g.f.), black, ul94v-0 insulator (receptacle) ?lcp, beige or black, ul94v-0 related product data product specification ?108-2231 sample kit ?1-1773441-6 hirose is a trademark of hirose electric. murata is a trademark of murata electronics, inc.
umcc ?ultraminiature coax connector and cable assembly series (continued) material and finish center conductor ? 0.8 mm dia. ?silver plated copper 1.32 mm dia. ?silver plated copper 1.37 mm dia. ?silver plated copper center conductor size ? 0.8 mm dia. ?stranded 7/0.05 mm 1.32 mm dia. ?stranded 7/0.08 mm 1.37 mm dia. ?stranded 7/0.10 mm dielectric ? 0.8 mm dia. ?fep or pfa 1.32 mm dia. ?fep 1.37 mm dia. ?fep dielectric size ? 0.8 mm dia. ?0.4 mm od 1.32 mm dia. ?0.66 mm od 1.37 mm dia. ?0.83 mm od shield ? 0.8 mm dia. ?silver plated copper braid 1.32 mm dia. ?double spl braid 1.37 mm dia. ?silver plated copper braid shield coverage ? 0.8 mm dia. ?> 90% 1.32 mm dia. ?> 90% (each braid layer) 1.37 mm dia. ?> 90% jacket ? 0.8 mm dia. ?fep or pfa 1.32 mm dia. ?fep 1.37 mm dia. ?fep jacket size ? 0.8 mm dia. ?0.80 mm od 1.32 mm dia. ?1.32 mm od 1.37 mm dia. ?1.37 mm od mechanical characteristics minimum bend radius ? 0.8 mm dia. ?5 mm single bend, 30 mm continuous flexing 1.32 mm dia. ?5 mm single bend, 30 mm continuous flexing 1.37 mm dia. ?5 mm single bend, 30 mm continuous flexing electrical characteristics impedance (ohms) ? 0.8 mm dia. ?50 2 1.32 mm dia. ?50 2 1.37 mm dia. ?50 2 v elocity of propagation ? 0.8 mm dia. ?70% 1.32 mm dia. ?70% 1.37 mm dia. ?70% cc resistance (ohms/km) ? 0.8 mm dia. ?1450 1.32 mm dia. ?560 1.37 mm dia. ?354 v oltage rating ? 0.8 mm dia. ?60 vac 1.32 mm dia. ?60 vac 1.37 mm dia. ?60 vac attenuation ?see chart cable information jacket dielectric center conductor braided shield -10 -9 -8 -7 -6 -5 -4 -3 -2 -1 0 0.0 1.0 2.0 3.0 4.0 5.0 6.0 frequency (ghz) 1.37 mm od 1.32 mm od 0.80 mm od attenuation (db/m) umcc cable attenuation 223 catalog 1307191 dimensions are in millimeters dimensions are shown for usa: 1-800-522-6752 south america: 55-11-2103-6000 revised 3-07 and inches unless otherwise reference purposes only. canada: 1-905-470-4425 hong kong: 852-2735-1628 specified. values in brackets specifications subject mexico: 01-800-733-8926 japan: 81-44-844-8013 www.tycoelectronics.com are standard equivalents. to change. c. america: 52-55-1106-0803 uk: 44-8706-080-208 rf coax connectors
224 catalog 1307191 dimensions are in millimeters dimensions are shown for usa: 1-800-522-6752 south america: 55-11-2103-6000 revised 3-07 and inches unless otherwise reference purposes only. canada: 1-905-470-4425 hong kong: 852-2735-1628 specified. values in brackets specifications subject mexico: 01-800-733-8926 japan: 81-44-844-8013 www.tycoelectronics.com are standard equivalents. to change. c. america: 52-55-1106-0803 uk: 44-8706-080-208 rf coax connectors pcb receptacles ? style b printed circuit board h max. receptacle umcc pcb receptacle 1.8 [.071] 0.25 [.010] 2.6 [.102] 2.6 [.102] 2.1 [.083] 3.0 [.118] 1.15 [.045] 0.35 [.014] 2.1 [.083] 1.9 [.075] 2.2 [.087] 1.00 [.039] ref. 1.05 [.041] 1.0 [.039] 4.0 [.157] ref. cut out prohibition area ref. ref. ref. ref. 0.6 [.023] style mates with umcc mated height description part number connector type (h) bi 2.00 umcc pcb receptacle, 2500 pc reel 1775146-1 .079 bi 2.00 umcc pcb receptacle, 500 pc bag 1775146-2 .079 recommended pc board layout umcc ?ultraminiature coax connector and cable assembly series (continued) pcb receptacles ? style a printed circuit board h max. receptacle umcc pcb receptacle 1.8 [.071] 0.25 [.010] 2.6 [.102] 2.6 [.102] 2.1 [.083] 3.0 [.118] 1.25 [.049] 0.35 [.014] 2.0 [.079] 1.9 [.075] 2.2 [.087] 1.0 [.039] ref. 1.05 [.041] 1.0 [.039] 4.0 [.157] ref. cut out prohibition area ref. ref. ref. ref. 0.6 [.024] style mates with umcc mated height description part number connector type (h) a ii / iii 2.00?.50 umcc pcb receptacle, 2500 pc reel 1566230-1 .079?098 a ii / iii 2.00?.50 umcc pcb receptacle, 500 pc bag 1566230-2 .079?098 recommended pc board layout note: pa rt numbers are rohs compliant except: indicates non-rohs compliant.
umcc ?ultraminiature coax connector and cable assembly series (continued) standard double ended cable assemblies printed circuit board h max. receptacle umcc connector mated height cable dia. length mates with pa rt number t ype (h) l pcb rcpt. 2.00 0.80 100.00 style b 1750109-1 i .079 .031 3.937 2.00 0.80 200.00 style b 1750109-2 .079 .031 7.874 2.00 0.80 100.00 style a 1750108-1 ii .079 .031 3.937 2.00 0.80 200.00 style a 1750108-2 .079 .031 7.874 2.50 0.80 100.00 style a 1750107-1 .098 .031 3.937 2.50 0.80 200.00 style a 1750107-2 .098 .031 7.874 2.50 1.32 100.00 style a 1750107-3 iii .098 .052 3.937 2.50 1.32 200.00 style a 1750107-4 .098 .052 7.874 2.50 1.37 100.00 style a 1750107-5 .098 .054 3.937 2.50 1.37 200.00 style a 1750107-6 .098 .054 7.874 l 4.0 [.157] ref. note: pa rt numbers are rohs compliant except: indicates non-rohs compliant. 225 catalog 1307191 dimensions are in millimeters dimensions are shown for usa: 1-800-522-6752 south america: 55-11-2103-6000 revised 3-07 and inches unless otherwise reference purposes only. canada: 1-905-470-4425 hong kong: 852-2735-1628 specified. values in brackets specifications subject mexico: 01-800-733-8926 japan: 81-44-844-8013 www.tycoelectronics.com are standard equivalents. to change. c. america: 52-55-1106-0803 uk: 44-8706-080-208 rf coax connectors
226 catalog 1307191 dimensions are in millimeters dimensions are shown for usa: 1-800-522-6752 south america: 55-11-2103-6000 revised 3-07 and inches unless otherwise reference purposes only. canada: 1-905-470-4425 hong kong: 852-2735-1628 specified. values in brackets specifications subject mexico: 01-800-733-8926 japan: 81-44-844-8013 www.tycoelectronics.com are standard equivalents. to change. c. america: 52-55-1106-0803 uk: 44-8706-080-208 rf coax connectors umcc ?ultraminiature coax connector and cable assembly series (continued) interseries cable assemblies umcc connector mated height cable dia. length description part number t ype (h) 2.50 1.37 200.00 umcc plug to 1750110-2 .098 .054 7.874 fme plug 2.50 1.37 200.00 umcc plug to 1750110-4 .098 .054 7.874 sma plug iii 2.50 1.37 200.00 umcc plug to 1750110-6 .098 .054 7.874 sma bulkhead jack 2.50 1.37 200.00 umcc plug to 1750110-8 .098 .054 7.874 mcx right-angle plug 2.50 1.37 200.00 umcc plug to 1-1750110-0 .098 .054 7.874 mmcx right-angle plug 2.00 0.80 200.00 umcc plug to 1750110-7 ii .079 .031 7.874 mcx right-angle plug 2.00 0.80 200.00 umcc plug to 1750110-9 .079 .031 7.874 mmcx right-angle plug 20.0 [.787] 200.0 [7.874] ref. 20.0 [.787] 200.0 [7.874] ref. 20.0 [.787] 200.0 [7.874] ref. 20.0 [.787] 200.0 [7.874] ref. 20.0 [.787] 200.0 [7.874] ref. umcc to fme plug umcc to sma plug umcc to mcx right-angle plug umcc to sma bulkhead jack umcc to mmcx right-angle plug note: pa rt numbers are rohs compliant except: indicates non-rohs compliant.
umcc ?ultraminiature coax connector and cable assembly series (continued) adapters extraction tool part number 1775231-1 umcc connector description part number t ype umcc jack receptacle to 1775228-1 i sma plug umcc plug to sma jack 1775229-1 umcc jack receptacle to 1775227-1 ii / iii sma plug umcc plug to sma jack 1775230-1 14.0 [.551] 5.6 [.220] 10.0 [.393] 5.3 [.208] 2.6 [.102] 6.25 [.246] 1/4-36uns pa rt number 1775229-1 14.0 [.551] 5.6 [.220] 10.0 [.393] 5.3 [.208] 2.5 [.098] 6.25 [.246] 1/4-36uns pa rt number 1775230-1 10.60 [.417] 8.0 [.315] hex. 1.10 [.043] 1.90 [.074] pa rt number 1775227-1 10.60 [.417] 8.0 [.315] hex. 1.10 [.043] 2.00 [.078] pa rt number 1775228-1 100 [3.937] 30.00 [1.181] 4.50 [.177] note: pa rt numbers are rohs compliant except: indicates non-rohs compliant. 227 catalog 1307191 dimensions are in millimeters dimensions are shown for usa: 1-800-522-6752 south america: 55-11-2103-6000 revised 3-07 and inches unless otherwise reference purposes only. canada: 1-905-470-4425 hong kong: 852-2735-1628 specified. values in brackets specifications subject mexico: 01-800-733-8926 japan: 81-44-844-8013 www.tycoelectronics.com are standard equivalents. to change. c. america: 52-55-1106-0803 uk: 44-8706-080-208 rf coax connectors
228 catalog 1307191 dimensions are in millimeters dimensions are shown for usa: 1-800-522-6752 south america: 55-11-2103-6000 revised 3-07 and inches unless otherwise reference purposes only. canada: 1-905-470-4425 hong kong: 852-2735-1628 specified. values in brackets specifications subject mexico: 01-800-733-8926 japan: 81-44-844-8013 www.tycoelectronics.com are standard equivalents. to change. c. america: 52-55-1106-0803 uk: 44-8706-080-208 rf coax connectors umcc ?ultraminiature coax connector and cable assembly series (continued) t ape and reel packaging specifications standard receptacles application notes mating/unmating ? cable plugs mating/unmating 1. to mate the connectors, insert the cable plug into the smt receptacle, mak- ing sure the cable plug is as vertical as possible and the mating axis of both connectors are aligned. do not insert on an extreme angle. 2. to unmate the connectors, insert the end portion of the extraction tool under the smt receptacle con- nector flanges and pull off vertically in the direction of the mating axis. permissible load do not apply excessive load to the cable after the connectors are mated. please refer to the permissi- ble loads indicated in the figure to the right. receptacle pulling tool step 1 step 2 printed circuit board 4n max. rf coax cabl e 2n max. 2n max. 4.0 0.1 [.157 .004 ] 2.0 0.1 [.079 .004 ] 12.0 [.472] 1.75 [.069] 5.5 [.217] 8.0 [.315] 0.30 [.012] 1.60 [.063] 1.50 [.059] center contact 330 [12.99] 13.0 [.512] 1.40 [.055] dimensions reel (2500 pieces/reel) soldering profile ? smt receptacle recommended temperature profile (reference) 1. the preferred technique for mounting the smt receptacle package is to r eflow solder the device onto a pcb (printed circuit board). 2. the maximum temperature for the lead of pcb surface does not exceed 240?. 3. the right reflow soldering profile is for reference and will modify under individ- ual different conditions. hand soldering (reference only) 1. soldering iron: the maximum temperature is 240?. 2. soldering period: within 5 seconds. dimensions of taping heating peak 240 c ?3 seconds (130 to 165 c) preheating 183 c within 2 minutes 40 to 50 seconds time ( c) 260 240 220 200 180 160 140 120 100 80 temperature
coaxicon series mobile phone switching coax connectors product facts able to switch rf signal from internal to external antenna smd component for standard pick & place up to 2.4 ghz up to 30,000 life cycles high radial and axial tolerance capture low insertion loss right-angle cable plug with floating for alignment tolerance capture application in handsets product specification 108-71000 t echnical features impedance ?50 ohms operating temperature ? ?0? to +85? radial tolerance capture ? ?.0 [.039] (except for 3.5 [.138] height) axial tolerance capture ?0.6 [.024] plating ?outer shell and center contact are gold plated short stamped contact ? selective gold plating long stamp contact (switch) full gold plating with ink barrier insertion loss ?0.30 db max. at 2 ghz isolation ?26 db min. at 2 ghz vswr ?1.15:1 at 1 ghz, below 1.20:1 at 2 ghz mated insertion loss (after life cycle testing) ?below 0.30 db at 1 ghz, below 0.45 db at 2 ghz unmated insertion loss (after life cycle testing) ?below 0.20 db at 1 ghz, below 0.35 db at 2 ghz packaging on reels for smd. for more details, refer to the product specification. the tyco electronics smd mobile phone connector system offers a low-cost and effective solution to passive switching between an internal and external phone antenna. when implemented in a cradle kit, the connector helps to make possible hands-free operation of the mobile phone within a vehicle, enhancing safety and per- mitting compliance with a growing body of legislation. connection to the external antenna also enhances signal gain and clarity. the connector design accommodates gross mis- alignment between the phone and cradle, which is extremely important when blindmating is necessary. the tyco electronics switch- ing coax connector system meets all performance objectives, including up to 30,000 connect/disconnect and switching cycles over the connectors life. figure 1 ?system configuration figure 2 ?system configuration 229 catalog 1307191 dimensions are in millimeters dimensions are shown for usa: 1-800-522-6752 south america: 55-11-2103-6000 revised 3-07 and inches unless otherwise reference purposes only. canada: 1-905-470-4425 hong kong: 852-2735-1628 specified. values in brackets specifications subject mexico: 01-800-733-8926 japan: 81-44-844-8013 www.tycoelectronics.com are standard equivalents. to change. c. america: 52-55-1106-0803 uk: 44-8706-080-208 rf coax connectors
230 catalog 1307191 dimensions are in millimeters dimensions are shown for usa: 1-800-522-6752 south america: 55-11-2103-6000 revised 3-07 and inches unless otherwise reference purposes only. canada: 1-905-470-4425 hong kong: 852-2735-1628 specified. values in brackets specifications subject mexico: 01-800-733-8926 japan: 81-44-844-8013 www.tycoelectronics.com are standard equivalents. to change. c. america: 52-55-1106-0803 uk: 44-8706-080-208 rf coax connectors coaxicon series mobile phone switching coax connectors (continued) right-angle cable plugs note: hex crimp dim. 3.25 [.128] l1 a l2 d f rg/u dimensions single packed bulk packed cable adfl1l2 part no. part no. 5x5 square 3.4 6.9 15.6 10.9 619028-2 5-619028-2 .134 .272 .614 .429 5x5 square 3.4 9.6 15.6 10.9 619028-4 5-619028-4 .134 .378 .614 .429 6.0 3.4 6.9 15.8 10.9 619041-2 5-619041-2 rg 174 .236 .134 .272 .622 .429 6.0 3.4 9.6 15.8 10.9 619041-4 5-619041-4 .236 .134 .378 .622 .429 6.0 3.4 6.9 20.3 11.0 619078-1 5-619078-3 .236 .134 .272 .799 .433 6.0 3.4 9.6 20.3 11.0 619078-2 5-619078-4 .236 .134 .378 .799 .433 smd switching jacks h d l l dimensions diameter part no. hl l d 6.0 8.0 3.2 5.4 619061-1 .236 .315 .126 .213 4.5 8.0 3.2 5.4 619062-1 .177 .315 .126 .213 3.5 8.0 3.2 5.4 619072-1 .137 .315 .126 .213 other models upon request. f or all dimensions, stencil and pcb recommended layout, see customer drawing. *dim. l is the width of the connector on the pcb. note: pa rt numbers are rohs compliant except: indicates non-rohs compliant.
coaxicon series mobile phone switching coax connectors (continued) switching smd jack low profile part number 619061-1, part number 619062-1, and part number 619072-1 2.70 0.25 [.106 .010 ] 0.80 0.05 [.031 .002 ] 8.00 0.20 [.315 .008 ] 3.10 0.10 [.122 .004 ] 2.40 0.10 [.094 .004 ] 2.10 0.10 [.083 .004 ] 0.42 0.08 [.017 .003 ] a 5.40 [.213] 0.20 0.07 [.008 .003 ] y a a section a-a detail y detail x 5.10 [.201] 5.00 [.197] 0.60 [.024] 4.30 0.10 [.169 .004 ] 3.20 0.10 [.126 .004 ] 1.70 [.067] 3.70 0.10 [.146 .004 ] 3.80 0.10 [.150 .004 ] 0.10 0.020 [.004 .0008 ] outer shell center contact dielectric spring second signal contact + 0.00 ?0.05 + .000 ?.002 3.40 [.134 ] 3.10 0.05 [.122 .002 ] recommended pcb layout 0.90 0.05 [.035 .002 ] 3.65 0.05 [.144 .002 ] r 2.70 0.05 [.106 .002 ] 3.05 0.05 [.120 .002 ] 2.70 0.10 [.106 .004 ] 2.40 0.10 [.094 .004 ] ground ground with solder stop mask signal with solder stop mas k area without trace signal + 0.10 ?0.00 + .004 ?.000 r 1.50 [.059 ] + 0.080 ?0.070 + .0031 ?.0028 4.58 [.180 ] + 0.080 ?0.070 + .0031 ?.0028 3.97 [.156 ] plating dim. a part no. gold 6.00 0.10 619061-1 .236 .004 gold 4.50 0.10 619062-1 .177 .004 gold 3.50 0.10 619072-1 .138 .004 note: pa rt numbers are rohs compliant except: indicates non-rohs compliant. 231 catalog 1307191 dimensions are in millimeters dimensions are shown for usa: 1-800-522-6752 south america: 55-11-2103-6000 revised 3-07 and inches unless otherwise reference purposes only. canada: 1-905-470-4425 hong kong: 852-2735-1628 specified. values in brackets specifications subject mexico: 01-800-733-8926 japan: 81-44-844-8013 www.tycoelectronics.com are standard equivalents. to change. c. america: 52-55-1106-0803 uk: 44-8706-080-208 rf coax connectors
232 catalog 1307191 dimensions are in millimeters dimensions are shown for usa: 1-800-522-6752 south america: 55-11-2103-6000 revised 3-07 and inches unless otherwise reference purposes only. canada: 1-905-470-4425 hong kong: 852-2735-1628 specified. values in brackets specifications subject mexico: 01-800-733-8926 japan: 81-44-844-8013 www.tycoelectronics.com are standard equivalents. to change. c. america: 52-55-1106-0803 uk: 44-8706-080-208 rf coax connectors coaxicon series mobile phone switching coax connectors (continued) switching smd jack esd protected part number 619133-3 plating ?gold 2.35 [.093] 2.45 [.096] 4.60 0.30 [.181 .012 ] 3.70 0.25 [.146 .010 ] r 1.40 [.055] max. 1.64 [.065] 3.20 [.126] 0.80 [.031] 6.30 0.10 [.248 .004 ] 5.40 0.10 [.213 .004 ] 0.25 0.10 [.010 .004 ] 7.00 [.276] 8.00 [.315] center contact dielectric spring spring contact second signal outer shell 0.50 [.020] a a section a-a recommended pcb layout 0.90 0.05 [.035 .002 ] 3.65 0.05 [.144 .002 ] 3.05 0.05 [.120 .002 ] 2.70 0.10 [.106 .004 ] 2.40 0.10 [.094 .004 ] ground ground with solder stop mask signal with solder stop mas k area without track signal + 0.10 ?0.00 + .004 ?.000 r 1.50 [.059 ] + 0.05 ?0.00 + .002 ?.000 r 2.70 [.106 ] + 0.080 ?0.070 + .0031 ?.0028 4.58 [.180 ] + 0.05 ?0.00 + .002 ?.000 3.10 [.122 ] + 0.080 ?0.070 + .0031 ?.0028 3.97 [.156 ] note: pa rt numbers are rohs compliant except: indicates non-rohs compliant.
coaxicon series mobile phone switching coax connectors (continued) switching smd jack esd protected 4.1mm height part number 619201-1* plating ?gold 3.45 [.136] 4.10 [.161] mated position unmated position 3.88 [.153] 1.07 [.042] 0.70 [.028] 45 0.70 [.028] 4 plcs. 5.00 [.197] 1.80 [.071] spring contact center contact outer shell dielectric 1.80 0.20 [.071 .008 ] 4.40 0.20 [.173 .008 ] 5.80 0.20 [.228 .008 ] r 0.28 [.011] 0.56 [.022] + 0.00 ?0.05 + .000 ?.002 3.40 [.134 ] + 0.15 ?0.10 + .006 ?.004 1.00 [.039 ] 1.60 [.063] 1.50 [.059] 1.00 [.039] 2.50 [.098] 5.00 [.197] recommended pcb layout 4.35 [.171] 6.20 [.244] 0.80 [.031] switching smd jack mid part number 619075-1 plating ?gold 5.50 0.10 [.217 .004 ] 5.00 0.10 [.197 .004 ] r 0.30 [.012] spring contact dielectric, unplated dielectric, plated 2.90 [.114] 0.40 [.016] b b d section b-b 3.50 [.138] 2.80 [.110] 1.00 [.039] 0.20 [.008] 60 38 4.20 [.165] 2.50 [.098] 0.40 [.016] d 1.85 [.073] 1.90 [.075] 0.70 [.028] 0.80 [.031] r 0.20 [.008] section d-d r 1.75 [.069] r 2.50 [.098] 1.60 [.063] 0.10 0.02 [.039 .001 ] 2.40 0.10 [.094 .004 ] 0.50 0.05 [.020 .002 ] 0.40 [.016] sq. 0.70 [.028] 1.25 [.049] *mirrored version of part number 619201-1 also available under part number 619231-1 note: pa rt numbers are rohs compliant except: indicates non-rohs compliant. 233 catalog 1307191 dimensions are in millimeters dimensions are shown for usa: 1-800-522-6752 south america: 55-11-2103-6000 revised 3-07 and inches unless otherwise reference purposes only. canada: 1-905-470-4425 hong kong: 852-2735-1628 specified. values in brackets specifications subject mexico: 01-800-733-8926 japan: 81-44-844-8013 www.tycoelectronics.com are standard equivalents. to change. c. america: 52-55-1106-0803 uk: 44-8706-080-208 rf coax connectors
234 catalog 1307191 dimensions are in millimeters dimensions are shown for usa: 1-800-522-6752 south america: 55-11-2103-6000 revised 3-07 and inches unless otherwise reference purposes only. canada: 1-905-470-4425 hong kong: 852-2735-1628 specified. values in brackets specifications subject mexico: 01-800-733-8926 japan: 81-44-844-8013 www.tycoelectronics.com are standard equivalents. to change. c. america: 52-55-1106-0803 uk: 44-8706-080-208 rf coax connectors coaxicon series mobile phone switching coax connectors (continued) nano switching coax part number 619213-1 plating ?gold 0.45 [.018] 0.60 [.024] 1.45 [.057] 1.92 0.15 [.076 .006 ] 0.55 [.022] 1.70 0.15 [.067 .006 ] 2.70 0.15 [.106 .006 ] 2.70 0.15 [.106 .006 ] 3.00 0.05 [.118 .002 ] recommended pcb la y out 0.55 0.05 [.022 .002 ] 1.55 0.05 [.061 .002 ] 2.65 0.05 [.104 .002 ] 2.90 [.114] 1.25 0.05 [.049 .002 ] 0.30 0.05 [.012 .002 ] 1.05 0.05 [.041 .002 ] 1.25 0.05 [.049 .002 ] right-angle cable plug for micro switching coax connector cable rg 316/ rg 174 part number 619211-2 plating ?gold 5.10 [.201] sq. lid shell angle ferrule center contact snap spring outer shell dielectric 4.80 [.189] 3.50 [.138] 7.00 [.276] 10.40 [.409] 2.00 [.079] 8.10 [.319] 2.20 [.087] 3.00 [.118] 0.70 [.028] micro switching coax connector part number 619196-1 plating ?gold 3.00 [.118] 1.30 [.051] 3.00 0.20 [.118 .008 ] 2.50 [.098] 1.54 [.061] 1.80 [.071] 0.80 [.031] 3.00 [.118] 1.70 [.067] section a-a a a 0.80 [.031] dielectric, plated dielectric, unplated contact spring 3.40 [.134] recommended pcb layout 1.70 [.067] 0.70 [.028] output signal ground input signa l 3.20 [.126] 1.40 [.055] 0.90 [.035] 1.00 [.039] 0.70 [.028] copper clearance note: pa rt numbers are rohs compliant except: indicates non-rohs compliant.
coaxicon series mobile phone switching coax connectors (continued) protected front contact cable plug part number 5-619028-1, part number 5-619078-1, and part number 5-619137-1 9.60 [.378] lid spring support washer shell angle ferrule safety ring center contact outer shell dielectric spring 3.40 [.134] a 9.60 [.378] 7.35 [.289] 5.10 [.201] protected front contact cable plug with cylindrical interface part number 5-619076-2 plating ?gold bulk packaging. 5.00 0.25 [.197 .010 ] 3.50 0.025 [.138 .0010 ] 9.60 [.378] lid spring support washer shell angle ferrule safety ring dielectric center contact outer shell spring 7.35 [.289] 5.10 [.201] 15.60 [.614] 10.92 [.430] 6.62 [.261] 5.67 [.223] + 0.110 ?0.010 + .0043 ?.0004 2.50 [.098 ] 10.00 [.394] 6.50 [.256] dielectric 1/4" - 36 uns-2a 35.00 [1.378] 22.00 [.866] outer shell dielectric safety ring center contac t 7.00 [.276] 13.00 [.512] 6.62 [.261] 5.47 [.215] 3.40 [.134] cable plug/ sma jack adapter part number 619052-1 plating ?gold 10.00 [.394] 6.50 [.256] dielectric 1/4" - 36 uns-2a 35.00 [1.378] 22.00 [.866] outer shell dielectric safety ring center contac t 7.00 [.276] 13.00 [.512] 6.62 [.261] 5.47 [.215] 3.40 [.134] 8.18 [.322] cable plug/ sma jack adapter with conical flange part number 619068-1 plating ?gold plating dim. a part no. gold 10.92 5-619028-1 .430 gold 14.90 5-619078-1 .587 gold 10.92 * 5-619137-1 * .430 bulk packaging. *outer conductor without slot. note: pa rt numbers are rohs compliant except: indicates non-rohs compliant. 235 catalog 1307191 dimensions are in millimeters dimensions are shown for usa: 1-800-522-6752 south america: 55-11-2103-6000 revised 3-07 and inches unless otherwise reference purposes only. canada: 1-905-470-4425 hong kong: 852-2735-1628 specified. values in brackets specifications subject mexico: 01-800-733-8926 japan: 81-44-844-8013 www.tycoelectronics.com are standard equivalents. to change. c. america: 52-55-1106-0803 uk: 44-8706-080-208 rf coax connectors
236 catalog 1307191 dimensions are in millimeters dimensions are shown for usa: 1-800-522-6752 south america: 55-11-2103-6000 revised 3-07 and inches unless otherwise reference purposes only. canada: 1-905-470-4425 hong kong: 852-2735-1628 specified. values in brackets specifications subject mexico: 01-800-733-8926 japan: 81-44-844-8013 www.tycoelectronics.com are standard equivalents. to change. c. america: 52-55-1106-0803 uk: 44-8706-080-208 rf coax connectors coaxicon series mobile phone switching coax connectors (continued) adapter sma jack ? msc test plug with conical flange part number 619210-1 plating ?gold 10.00 [.394] 6.50 [.256] dielectric 20 1/4" - 36 uns-2a 22.00 [.866] outer shell dielectric center contac t 7.00 [.276] 2.90 [.114] 2.20 [.087] 11.40 [.449] 3.00 [.118] 0.70 [.028] r 0.35 [.014] 8.18 [.322] + 0.17 ?0.12 + .007 ?.005 13.00 [.512 ] adapter sma jack ? nsc test plug with t wo-hole flange part number 619214-1 plating ?gold + 0.10 ?0.00 + .004 ?.000 2.60 [.102 2 plcs. ] 8.00 0.10 [.314 .004 ] a a 14.00 0.10 [.551 .004 ] 20.00 0.10 [.787 .004 ] 3.40 0.10 [.134 .004 ] center contact pin 1.00 0.10 [.039 .004 ] 28.20 0.30 [1.110 .012 ] 7.00 0.10 [.276 .004 ] 7.50 0.20 [.295 .008 ] 5.00 0.10 [.197 .004 ] 6.00 0.10 [.236 .004 ] 18.70 0.20 [.736 .008 ] 8.70 0.20 [.343 .008 ] dielectric flange center contact female dielectric outer shell 10.00 [.394] 6.50 [.256] dielectric 1/4" - 36 uns-2a 35.00 [1.378] 22.00 [.866] center contact outer shell 7.00 [.276] 13.00 [.512] 0.60 [.024] 5.40 [.213] + 0.020 ?0.080 + .0008 ?.0031 3.40 [.134 ] switching smd jack/ sma jack adapter part number 619053-1 plating ?gold note: pa rt numbers are rohs compliant except: indicates non-rohs compliant.
237 catalog 1307191 dimensions are in millimeters dimensions are shown for usa: 1-800-522-6752 south america: 55-11-2103-6000 revised 3-07 and inches unless otherwise reference purposes only. canada: 1-905-470-4425 hong kong: 852-2735-1628 specified. values in brackets specifications subject mexico: 01-800-733-8926 japan: 81-44-844-8013 www.tycoelectronics.com are standard equivalents. to change. c. america: 52-55-1106-0803 uk: 44-8706-080-208 rf coax connectors quick snap stripline (qsl) coaxial connector coaxial cable displacement interface low profile highly reliable ruggedized interface surface mount technology excellent price-to- performance ratio platform expandable to include multi-port versions and other customization product facts surface mount compatible rohs compliant (lead-free smt process [260 c] compatible) pci / pci express compatible designed for rg 174 & rg 316 cable, and easily adaptable to other cable types overall height < 10 mm can be packaged to meet ip67 sealing 10mm x 10.6mm max. footprint (w/o panel extension) cost effective solution to standard screw machine rf connectors applications pci, mini pci, pci express mobile antenna/gps/radio systems/rfid pda / pcs / cellular handset applications wireless communications systems satellite communications, broadcast, multimedia automotive telematics specifications characteristic impedance ? 50 ohms frequency range ?dc to 6 ghz vswr ?1.3 max to 3 ghz, 1.5 max to 6 ghz rated voltage ?60 vac rms dielectric withstanding voltage 800 vac, 50 hz (at sea level) insulation resistance ? 100 megohms min operating temperature ? ?0 to +125? engagement force ?< 30 n disengagement force ?< 20 n cable retention ?110 n durability ?250 cycles 10.00 [.394] max. 10.00 [.394] 13.50 [.531] max. max. surface mount jack receptacle 8.00 [.315] max. 8.20 [.323] 24.00 [.945] 12.00 [.472] max. max. rg-174 cable plug part number 1274794-1 part number 1274795-1 related product data product specification ?108-2224 note: pa rt numbers are rohs compliant except: indicates non-rohs compliant. pci, pci express are trademarks of pci sig.
238 catalog 1307191 dimensions are in millimeters dimensions are shown for usa: 1-800-522-6752 south america: 55-11-2103-6000 revised 3-07 and inches unless otherwise reference purposes only. canada: 1-905-470-4425 hong kong: 852-2735-1628 specified. values in brackets specifications subject mexico: 01-800-733-8926 japan: 81-44-844-8013 www.tycoelectronics.com are standard equivalents. to change. c. america: 52-55-1106-0803 uk: 44-8706-080-208 rf coax connectors din inserts coaxial inserts according to cecc 22 330 and high- current inserts (cecc spec- ification under preparation) can be used in conjunction with a din 41612 style m contact base (cecc 75 101-801), siedecon, and z-pack 2mm hm connectors. coaxial inserts have a con- tact system based on the pin-socket principle with the same dimensions as the series 1.0/2.3 coaxial con- nectors and are plug-com- patible. the product family is represented by various 50 ? and 75 ? styles that can be used far into the ghz range. the high mounting density (pitch between adja- cent contacts starting at 7.5 mm) and installation into the contact base, by means of a ?nap-in?lock, make the inserts particularly well suited for applications. due to the centering, ? coaxial plugs are installed in contact bases with audio-frequency (af) female contacts ? coaxial jacks are installed in contact bases with af male contacts. the high-quality materials used with coaxial inserts ensure a high grade of service even in an industrial atmosphere. t echnical data electrical and mechanical characteristics of coaxial inserts in accordance with din 41626 part 2 and cecc 22 330 characteristic impedance ? 50/75 ? frequency range ?up to 2 ghz reflection factor up to 2 ghz 1 0.10 insulation resistance ? initial value ? 1 g ? after stressing ? 200 m ? screening effectiveness ? 70 db inner conductor contact resistance after stressing ? 10 m ? outer conductor continuity after stressing ? 7.5 m ? v oltage proof 2 ? flexible cables (rg 316) at sea level ?750 v, 50 hz at 20 km altitude ?150 v, 50 hz w orking voltage 2 ? flexible cables (rg 316) at sea level ?350 v, 50 hz at 20 km altitude ?65 v, 50 hz service life ?500 cycles climatic category ?55/125/56 notes 1 guideline dimensions, depending on cable type and connector style. 2 some cable types suitable for use with these connectors have lower characteristic values than speci- fied here. product facts meets requirements of din 41626 and cecc 22330 suitable for din 41612 type m connectors (eurocard), siedecon, and z-pack 2mm hm connectors meets din performance level ii crimp termination for inner and outer conductors (cable mount only) eliminates the need for solder right-angle and vertical style board mount pin and socket contacts board mount product avail- able with both solder and compliant tails straight cable mount pin and socket contacts for rg 316, and rg 179 cable contact impedance of 50 and 75 ohms for cable mount and 50 ohms for board mount
din inserts (continued) coaxial inserts, 50 ohm z-pack 2mm hm connectors ve rtical pc board mount, compliant 5.50 [.216] min. 12.21 [.480] ref. 4.75 ?.03 [.187 ?001 ] 4.15 ?.012 [.163 ?0004 ] 1.15 +0.30 [.045 +.012 ] 5.10 [.200] max. sq. 45 0' typ. 90 0' typ. typ. 1.00 0.05 [.039 .002 ] 5.08 0.05 [.200 .002 ] 45 0' typ. 90 0' typ. typ. 1.00 0.05 [.039 .002 ] 5.08 0.05 [.200 .002 ] right-angle pc board mount, compliant 17.75 [.700] ref. 0.03 4.75 .187 0.09 .001 .004 4.20 +0.075 [.165 +.003 ] 4.00 0.10 [.157 .004 ] 5.35 ?.30 [.216 ?012 ] 7.00 0.10 [.275 .004 ] 6.10 [.240] max. sq. recommended pc board layout t ype housing type application tooling part no. ve r tical pcb socket, z-pack 2mm 904800-1 5148385-1 compliant hm male rt. angle pcb pin, z-pack 2mm 904805-1 5148386-1 compliant hm female 904804-1 support anvil recommended pc board layout coaxial inserts to sma adapters coaxial insert plug to sma jack coaxial insert socket to sma jack 19.1 [.755] max. 7.92 0.12 [.312 .005 ] hex. 7.92 [.312] hex. part no. 1274192-1 part no. 1274191-1 note: pa rt numbers are rohs compliant except: indicates non-rohs compliant. 239 catalog 1307191 dimensions are in millimeters dimensions are shown for usa: 1-800-522-6752 south america: 55-11-2103-6000 revised 3-07 and inches unless otherwise reference purposes only. canada: 1-905-470-4425 hong kong: 852-2735-1628 specified. values in brackets specifications subject mexico: 01-800-733-8926 japan: 81-44-844-8013 www.tycoelectronics.com are standard equivalents. to change. c. america: 52-55-1106-0803 uk: 44-8706-080-208 rf coax connectors
240 catalog 1307191 dimensions are in millimeters dimensions are shown for usa: 1-800-522-6752 south america: 55-11-2103-6000 revised 3-07 and inches unless otherwise reference purposes only. canada: 1-905-470-4425 hong kong: 852-2735-1628 specified. values in brackets specifications subject mexico: 01-800-733-8926 japan: 81-44-844-8013 www.tycoelectronics.com are standard equivalents. to change. c. america: 52-55-1106-0803 uk: 44-8706-080-208 rf coax connectors din inserts (continued) dim a max. cable type width across flats part no. of hex profile 18.7 2.6 rg 316 (50 ? ) 3.2 1393668-4 .736 .102 .126 22.3 2.6 rg 316 (50 ? ) 3.2 1393668-8 .878 .102 .126 18.7 3.0 rd 316 (50 ? ) 3.6 1393668-7 .736 .118 .142 18.7 2.67 rg 179 (75 ? ) 3.2 2-1393668-4 .736 .105 .126 a 9.6 [.378] 13.1 [.516] 6.0 [.236] 4.05 [.159] a 9.35 [.368] 13.1 [.516] 6.0 [.236] 4.75 [.187] dim a max. cable type width across flats part no. of hex profile 2.6 rg 316 (50 ? ) 3.2 1-1393668-2 19 .102 .126 .748 2.67 rg 179 (75 ? ) .105 22.4 2.67 rg 179 (75 ? ) 3.2 2-1393668-8 .882 .105 .126 24.0 2.67 rg 179 (75 ? ) 3.2 3-1393668-6 .945 .105 .126 max. cable type width across flats part no. of hex profile 2.6 rg 316 (50 ? ) 3.2 1392019-1 .102 .126 2.67 rg 179 (75 ? ) 3.2 3-1393668-0 .105 .126 max. cable type width across flats part no. of hex profile 2.6 rg 316 (50 ? ) 3.2 1392020-1 .102 .126 2.67 rg 179 (75 ? ) 3.2 3-1393668-4 .105 .126 5.8 [.228] 23.9 [.941] 9.6 [.378] 4.05 [.159] 5.8 [.228] 23.9 [.941] 9.35 [.368] 4.75 [.187] coaxial inserts (50 ? /75 ? ) bulkhead cable jack for male connectors bulkhead cable jack for female connectors right-angle bulkhead jack for male connectors right-angle bulkhead plug for female connectors note: pa rt numbers are rohs compliant except: indicates non-rohs compliant.
din inserts (continued) bulkhead plug, pc board connection for din 41612 m female connectors coaxial inserts (50 ? /75 ? ) (continued) 9.35 [.368] 17.9 [.705] 5.08 [.200] 4.75 [.187] 1.0 [.039] 2.54 [0.10] recommended mounting hole pitch 1.0 [.039] 2.54 [0.10] pitch part no. 1-1393662-2 right-angle bulkhead plug, pc board for siedecon female connectors part no. 1-1393662-4 right-angle bulkhead jack, pc board for din 41612 m male connectors 5.08 [.200] 17.9 [.705] 3.0 [.118] 6.9 [.272] 9.6 [.378] 4.05 [.159] 5.08 [.200] 17.8 [.701] 3.0 [.118] 6.9 [.272] 9.35 [.368] 4.75 [.187] recommended mounting holes for pa rt no. 1-1393662-2 and 1-1393662-4 part no. 1-1393662-0 note: pa rt numbers are rohs compliant except: indicates non-rohs compliant. 241 catalog 1307191 dimensions are in millimeters dimensions are shown for usa: 1-800-522-6752 south america: 55-11-2103-6000 revised 3-07 and inches unless otherwise reference purposes only. canada: 1-905-470-4425 hong kong: 852-2735-1628 specified. values in brackets specifications subject mexico: 01-800-733-8926 japan: 81-44-844-8013 www.tycoelectronics.com are standard equivalents. to change. c. america: 52-55-1106-0803 uk: 44-8706-080-208 rf coax connectors
242 catalog 1307191 dimensions are in millimeters dimensions are shown for usa: 1-800-522-6752 south america: 55-11-2103-6000 revised 3-07 and inches unless otherwise reference purposes only. canada: 1-905-470-4425 hong kong: 852-2735-1628 specified. values in brackets specifications subject mexico: 01-800-733-8926 japan: 81-44-844-8013 www.tycoelectronics.com are standard equivalents. to change. c. america: 52-55-1106-0803 uk: 44-8706-080-208 rf coax connectors size 8 contacts performance characteristics frequency range ? to 500 mhz operating voltage, max. 275 vac rms @ sea level te rmination resistance, max. center contact 6.0 milliohms outer contact 3.0 milliohms insulation resistance, min. 5,000 megohms @ 500 vdc dielectric withstanding voltage sea level 800 volts rms 30,000 ft [9,144 m] 525 volts rms 70,000 ft [21,336m] 275 volts rms vswr to 500mhz, max. pin/socket vswr straight/straight 1.30 right-angle/straight 1.35 right-angle/right-angle 1.40 rf crosstalk 90db @ 5-500 mhz mating force, max. 4.0 lb [17.8 n] unmating force, min. 2.0 oz [0.556 n] contact retention 20 lb [89 n] contact durability 500 cycles cable force rg/u lb [n] 316, 188, 174, 20 89 179, 179a, 179b 188-type 35 155.8 double-braid 142, 142a, 142b 50 222.5 operating temperature 55? to +125? thermal shock ? 5? to +125? per mil-std-1344, method 1003, cond. a physical shock 50 gs per mil- std-1344, method 2004, cond. a vibration mil-std-1344, method 2005, cond. ii moisture resistance 240 hours per mil-std-1344, method 1002, cond. ii salt fog 48 hours per mil-std- 1344, method 1001, cond. b extraction tool numbers subminiature d housings 58095-1 (amplimite) amp-hdi housings 58095-2 material brass per qq-b-626 and mil-c-50 phosphor bronze per qq-b-750 beryllium copper per qq-c-530 teflon ?er mil-p-19468 nylon ?er mil-m-20693 finish bright tin plating per astm-b-571 copper plating ? er mil-c-14550 gold plating ? er mil-g-45204 nickel plating per qq-n-290 straight contacts pin socket a max. b dia. max. alignment ring f or use in subminiature d housing only a max. b dia. max. shell dimensions die 50 ohm non-impedance matched rg/cable t ype ab insert* pin socket pin socket 178, 178a , brass 24.13 5.94 59993-1 5228618-5 5228596-5 178b,196, 196a .950 .234 174, 316, brass 24.28 5.94 59993-1 5221980-1 5228618-1 5228596-1 188, 188a .956 .234 179, 179a, 179b, 187, brass 24.28 5.94 59993-1 5228618-2 5228596-2 187a, 161, .956 .234 belden 9221 174, 316, 188, brass 24.28 5.94 59993-1 5228618-3 5228596-3 double braid .956 .234 142, 142a, 142b, brass 27.43 6.48 58212-1 5221981-2 5228618-4 5228596-4 400, belden 9246 1.08 .255 *for hand tool 69710-1 or pneumatic tool 69365-8. note: non-impedance matched and 50 ohm are not intermateable. note: pa rt numbers are rohs compliant except: indicates non-rohs compliant. belden is a trademark of belden wire and cable company. teflon is a trademark of e.i. dupont de nemours and company.
size 8 contacts (continued) pc board mount contacts recommended pc board layout contact part no. t ype non-impedance matched right-angle 5221162-1 socket contact 1.02 ?.08 [.040 ?003 ] (5 holes) dia. 5.08 ?.08 [.200 ?003 ] 2.54 ?.08 [.100 ?003 ] 5.08 ?.08 [.200 ?003 ] 2.54 ?.08 [.100 ?003 ] right-angle socket contact 17.58 [.692] 6.50 [.256] 11.33 [.446] note: pa rt numbers are rohs compliant except: indicates non-rohs compliant. 243 catalog 1307191 dimensions are in millimeters dimensions are shown for usa: 1-800-522-6752 south america: 55-11-2103-6000 revised 3-07 and inches unless otherwise reference purposes only. canada: 1-905-470-4425 hong kong: 852-2735-1628 specified. values in brackets specifications subject mexico: 01-800-733-8926 japan: 81-44-844-8013 www.tycoelectronics.com are standard equivalents. to change. c. america: 52-55-1106-0803 uk: 44-8706-080-208 rf coax connectors
244 catalog 1307191 dimensions are in millimeters dimensions are shown for usa: 1-800-522-6752 south america: 55-11-2103-6000 revised 3-07 and inches unless otherwise reference purposes only. canada: 1-905-470-4425 hong kong: 852-2735-1628 specified. values in brackets specifications subject mexico: 01-800-733-8926 japan: 81-44-844-8013 www.tycoelectronics.com are standard equivalents. to change. c. america: 52-55-1106-0803 uk: 44-8706-080-208 rf coax connectors coaxicon contacts product facts t yco electronics provides a variety of contacts for coaxial connectors contacts are available in a range of sizes that may be used with the various types of coaxial cable on the market coaxicon contacts are of the crimp, snap-in type and are available in the follow- ing designs: miniature contacts, subminiature contacts and size 8 contacts miniature contacts are designed for high density multiple circuit connector applications. a wide range of cable sizes is accommo- dated by using three sizes of outer shell termination ends and three sizes of contacts. subminiature contacts are used in high density applications and are ideal for mixing coaxial and other styles of pin and socket contacts in the same con- nector housing. size 8 contacts are com- patible with industry stan- dard size 8 connectors such as subminiature d and amp-hdi connector housings. straight and right-angle styles, as well as pc board versions for amp-hdi connectors are available.
miniature contacts inner dielectric polypropylene, nylon, or polymethylpentene, general purpose retention spring stainless steel per qq-s-766 ferrule copper per qq-c-576 performance characteristics insulation resistance 5000 megohms min dielectric withstanding voltage 1,000 volts rms for 1 minute contact resistance 2.0 milliohms @ 1 ampere low-level conductivity 10 milli- volts dc min. vswr 1.3 to 1.0 @ 1,000 mhz max. cable retention rg/u retention cable lbs [n] 58c 50 [222] 188a 30 [133] 180b 28 [125] 195a 16 [71] durability 500 cycles @ 10 cycles per minute max. vibration ? hrs. per mil-std-202, method 201 shock 50 gs per mil-std-202, method 213, cond. g t emperature cycling ? cycles per mil-std-202, method 102, cond c. t emperature range -55? to +125? t est method for electronic and electrical component parts mil-std-202 material outer shell brass per mil-c-50 center conductor brass per qq-b-626, or beryllium copper per qq-c-533 finish outer shell, center conductor 0.00076 [.000030] gold over 0.00076 [.000030] nickel retention spring nickel per qq-n-290 ferrule bright tin per mil-t-10727 note: a ferrule and retention spring (201142-2) are required for each pin and socket. extraction tool no. 305183-8 die insert for tools: part numbers rg/u cable ferrule integral die pro-crimper hand tool 69710-1 no. hand tool pneu. 69365-2, pin socket 69365-3 2 316, 188, 188a 328666 -x 69227-2 201143-5 201144-5 174 179, 179a, 179b 161, 187, 187a 328666 -x 69227-2 201143-1 201144-1 belden 9221 188 double braid 221848-3 58290-1 69227-2 201143-5 201144-5 316 double braid 122 328664 -x 45639-2 91912-3 69222-2 201145-1 180, 180a, 180b 195, 195a, 328664 -x 45639-2 91912-3 69222-2 201145-2 201146-2 21-597 belden 8218 328664 -x 45639-2 91912-3 69222-2 201145-2 201146-2 58, 58a, 58b, 58c 328663 -x 45740-2 69220-2 201145-4 201146-4 141 330478 -x 69248-4 69315-4 201145-4 201146-4 55, 55a, 55b, 223 124, 140, 210 62, 62a, 62b 329006 -x 69675-1 201097-1* 201098-1* 59, 59a, 59b t wisted pair 24-22 awg [0.2-0.4 mm 2 ] 328666 -x 91912-4 69672 -x 201143-5 201144-5 (stranded) 1 shielded wire 328663 -x 45740-2 69220-2 201145-4 201146-4 22, nas-702, class b brand rex t5788a 328664 -x 45639-2 91912-3 69222-2 201145-2 201146-2 26 awg [0.12-0.155 mm 2 ] 3 *these contacts are for use in the 4-position g series connector modules only. 1 maximum insulation diameter 2.92 [.115] (two wires combined). 2 includes bench mount and foot control; requires manual take-up attachment no. 69689. 3 dielectric o.d. 2.69 [.106] max.; cable o.d. 4.06 [.160]. ferrules pin socket retention springs pa rt no. 201142-2 note: pa rt numbers are rohs compliant except: indicates non-rohs compliant. 245 catalog 1307191 dimensions are in millimeters dimensions are shown for usa: 1-800-522-6752 south america: 55-11-2103-6000 revised 3-07 and inches unless otherwise reference purposes only. canada: 1-905-470-4425 hong kong: 852-2735-1628 specified. values in brackets specifications subject mexico: 01-800-733-8926 japan: 81-44-844-8013 www.tycoelectronics.com are standard equivalents. to change. c. america: 52-55-1106-0803 uk: 44-8706-080-208 rf coax connectors
246 catalog 1307191 dimensions are in millimeters dimensions are shown for usa: 1-800-522-6752 south america: 55-11-2103-6000 revised 3-07 and inches unless otherwise reference purposes only. canada: 1-905-470-4425 hong kong: 852-2735-1628 specified. values in brackets specifications subject mexico: 01-800-733-8926 japan: 81-44-844-8013 www.tycoelectronics.com are standard equivalents. to change. c. america: 52-55-1106-0803 uk: 44-8706-080-208 rf coax connectors miniature pc board sockets material shell and center contact brass per mil-c-50 and qq-b-626 dielectric polypropylene, or polymethylpentene, general purpose finish center contact ? .00076 [.000030] gold over copper shell gold plated per mil-g-45204 performance characteristics dielectric withstanding voltage 1,000 volts, rms impedance non-constant operating temperature range -55? to +85? 15.24 [.600] 2.54 [.100] 12.7 [.500] 2.54 [.100] 1.32 dia. [.052] (5 holes) recommended mounting hole layout spring latch shell center conductor locking latch 2.54 ref. [.100] 4.52 dia. [.178] ref. spring latch 2.54 ref. [.100] 0.36 ref. [.014] 1.27 t yp. [.050] 12.7 [.500] 2.54 [.100] 17.78 [.700] 1.02 dia. [.040] a b 6.23 [.245] t ype pc board retention dimensions part no. thickness lb. [n] a b spring latch 1.57 1.25 5.56 9.07 3.18 50084-1 .062 .357 .125 spring latch 3.18 1.25 5.56 7.49 4.75 50095-1 .125 .295 .187 locking latch 3.18 7 .25 31.1 6 7.49 4.75 50105-1 .125 .295 .187 locking latch 1.57 7 .25 31.1 6 9.07 3.18 50107-1 .062 .357 .125 note: f or mateable miniature contacts, see page 245. locking latch note: pa rt numbers are rohs compliant except: indicates non-rohs compliant.
subminiature pc board sockets material shell and center contact brass per mil-c-50 and qq-b-626 dielectric polypropylene, or polymethylpentene, general purpose finish center contact 0.00076[.000030] gold per mil-g-45204 over copper per mil-c-14550 shell gold performance characteristics dielectric withstanding voltage 600 volts, rms operating temperature range -55? to +85? 1.09 dia. [.043] #57 drill (3 holes) 10.16 [.400] 15.24 [.600] recommended mounting hole layout locking latch shell center conductor spring latch 22.23 max. [.875] locking latch 1.47 [.058] 0.84 0.2 [.033 ?008 ] 10.16 [.400] 15.24 [.600] 0.84 dia. [.033] 4.52 [.178] 3.05 .0.2 [.120 ?008 ] mating subminiature coaxicon pins these short subminiature coaxicon pins are recommended for use with any of the sockets listed above. note: alignment springs are not required for this application and are not included with the pin assemblies. t ype pc board dim. part no. thickness l spring latch 1.57 2.54 226023-1 .062 .100 locking latch 1.57 2.54 226060-1 .062 .100 integral die insert for tools: rg/u ferrule hand tool 69710-1 part no. cable no. die pneu. 69365-2, hand tool 69365-3 174 1-332056-0 91911-3 69690 -x 51563-8 316, 188, 188a 179, 179a, 179b 1-332056-0 91911-4 69690-1 51563-8 187, 187a 161 1-332056-0 69656-5 51563-8 a note: pa rt numbers are rohs compliant except: indicates non-rohs compliant. 247 catalog 1307191 dimensions are in millimeters dimensions are shown for usa: 1-800-522-6752 south america: 55-11-2103-6000 revised 3-07 and inches unless otherwise reference purposes only. canada: 1-905-470-4425 hong kong: 852-2735-1628 specified. values in brackets specifications subject mexico: 01-800-733-8926 japan: 81-44-844-8013 www.tycoelectronics.com are standard equivalents. to change. c. america: 52-55-1106-0803 uk: 44-8706-080-208 rf coax connectors
248 catalog 1307191 dimensions are in millimeters dimensions are shown for usa: 1-800-522-6752 south america: 55-11-2103-6000 revised 3-07 and inches unless otherwise reference purposes only. canada: 1-905-470-4425 hong kong: 852-2735-1628 specified. values in brackets specifications subject mexico: 01-800-733-8926 japan: 81-44-844-8013 www.tycoelectronics.com are standard equivalents. to change. c. america: 52-55-1106-0803 uk: 44-8706-080-208 rf coax connectors selection chart for twisted pairs and shielded wire die insert for tools: wire size hand tool contact part numbers integral die pro-crimper 69710-1 multimate short socket ferrule awg [mm 2 ] hand tool pneu. tool pin pin 69365-2, 69365-3* 30 0.05 69656-2 69690-2 226537-3 51563-3 51565-3 1-332057-0 (twisted pair, solid) 28 0.08-0.09 91911-3 69690 - 226537-3 51563-3 51565-3 1-332057-0 (twisted pair, solid) 28 69690-1 (twisted pair, stranded; 0.08-0.09 91911-4 or 226537-3 51563-3 51565-3 1-332057-0 7 str., .005 [0.13] dia.) 69690-2 26 (twisted pair, solid or stranded; 0.12-0.15 91911-3 69690 -2 226537-3 51563-3 51565-3 1-332057-0 7 str., .0063 [0.16] dia.) 26 (shielded, 0.75 [1.91] 0.12-0.15 69656-3 69690-3 226537-1 51565-1 1-332057-0 max. o.d.) * includes bench mount and foot control. extraction tool 305183 note: a ferrule is required for each pin and socket. subminiature contacts material outer shell brass per mil-c-50 center conductor beryllium copper per qq-c-533 (pin); brass per qq-b-626 (socket) inner dielectric polypropylene, nylon, or polymethylpentene, general purpose retention spring stainless steel per qq-s-766 ferrule copper per qq-c-576 finish outer shell and socket center conductor 0.00076 [.000030] gold over 0.00127 [.000050] nickel pin center conductor 0.00076 [.000030] gold over 0.00254 [.000100] copper ferrule bright tin per mil-t-10727 a pin ferrule 16.51 max. [.650] socket ferrule a = multimate pin 25.65 [1.010] short pin 22.66 [.892] selection chart for coaxial cable integral die insert for tools: contact part numbers rg/u cable die pro-crimper hand tool 69710-1 hand tool pneu. tool 69365-2, multimate short socket ferrule 69365-3* pin pin 178, 178a, 178b 69656-2 69690-2 226537-2 51565-2 1-332057-0 196, 196a 196 69656-9 226537-2 51565-2 1- 225088-1 (double braid) 174, 316 91911-3 69690 - 226537-1 51565-1 1-332056-0 188, 188a 179, 179a, 179b 187, 187a 911911-4 69690-1 226537-1 51565-1 1-332056-0 belden 9221 rd-316 69656-7 226537-1 51565-1 1- 225088-3 187 69656-8 226537-1 51565-1 1- 225088-1 (double braid) 161 69656-5 226537-1 51565-1 1-332056-0 note: pa rt numbers are rohs compliant except: indicates non-rohs compliant.
siemax connectors applications multiplex systems base stations high density systems product facts multi coax surface mount maximum packaging density component placement on both sides of pcb fully automated assembly (pick-and-place) modular design t echnical data interface: series 1.0/2.3 impedance: 75 international specifications: iec 169-29 and cecc 22 230 frequency range up to 2 ghz compact grid pitch 10 [0.39] guaranteed coplanarity of max. 0.1 [0.004] integrated positioning pins for manual placement optional mechanical securing siemax connectors com- bine the benefits of surface mount technology and mod- ular design. this multi coax connector is packaged in tape-and-reel for automatic placement, has optimum solder joints and 100% r eflow suitability. this con- nector is ideal for systems r equiring superior packag- ing density because it can be placed on both sides of the printed circuit board. the modular design pro- vides flexibility in terms of the number of poles offered (two- or three-poles). it can be stacked, enabling any r equired configuration to be produced. the siemax connector also allows the use of any other connector series, e.g. smb, is resist- ant to high temperatures, and is robust, with reliably sustained coplanarity. for general information on series 1.0/2.3 connectors, see page 129. 249 catalog 1307191 dimensions are in millimeters dimensions are shown for usa: 1-800-522-6752 south america: 55-11-2103-6000 revised 3-07 and inches unless otherwise reference purposes only. canada: 1-905-470-4425 hong kong: 852-2735-1628 specified. values in brackets specifications subject mexico: 01-800-733-8926 japan: 81-44-844-8013 www.tycoelectronics.com are standard equivalents. to change. c. america: 52-55-1106-0803 uk: 44-8706-080-208 rf coax connectors
250 catalog 1307191 dimensions are in millimeters dimensions are shown for usa: 1-800-522-6752 south america: 55-11-2103-6000 revised 3-07 and inches unless otherwise reference purposes only. canada: 1-905-470-4425 hong kong: 852-2735-1628 specified. values in brackets specifications subject mexico: 01-800-733-8926 japan: 81-44-844-8013 www.tycoelectronics.com are standard equivalents. to change. c. america: 52-55-1106-0803 uk: 44-8706-080-208 rf coax connectors siemax connectors, series 1.0/2.3 (75 ohm) siemax connector, smt right-angle jack, 2 poles 12.10 0.05 [.476 .002 ] 1.90 0.05 [.075 .002 ] 3.00 0.05 [.118 .002 ] 5.10 0.05 [.201 .002 ] 2.00 [.079] 2.00 [.079] 2.00 [.079] x 7 = 2.00 [.079] 8.00 [.315] x 4 = 14.00 [.551] 11.10 0.05 [.437 .002 ] 17.50 0.05 [.689 .002 ] 1.60 0.05 [.063 .002 ] + 0.10 ? 0.00 + .004 ?.000 ? 1.40 [.055 ] 0.05 [.002] 10 plcs. 0.05 [.002] 8 plcs. 2.00 0.05 [.079 .002 ] 2.80 0.05 [.110 .002 ] 7.20 0.05 [.283 .002 ] 13.00 0.05 [.512 .002 ] + 0.10 ? 0.00 + .004 ?.000 1.90 [.075 ] 24.0 [0.94] 6.5 [0.26] ? 4.15 [0.16] 18.0 [0.71] 10.0 [0.39] pc board layout coupling type* part no. c, f 6-1393696-2 *f or coupling type see din 1.0/2.3 section. 12.10 0.05 [.476 .002 ] 1.90 0.05 [.075 .002 ] 4.40 0.05 [.173 .002 ] 5.10 0.05 [.201 .002 ] 2.00 [.079] 23 plcs. 23 plcs. 2.00 [.079] 2.00 [.079] x 12 = 2.00 [.079] 8.00 [.315] x 4 = 24.00 [.945] 4.00 [.157] ? 2.50 [.098] 11.10 0.05 [.437 .002 ] 27.50 0.05 [1.083 .002 ] 1.60 0.05 [.063 .002 ] + 0.10 ? 0.00 + .004 ?.000 1.90 [.075 ] + 0.10 ? 0.00 + .004 ?.000 1.90 [.075 ] + 0.10 ? 0.00 + .004 ?.000 ? 1.40 [.055 ] + 0.10 ? 0.00 + .004 ?.000 1.20 [.047 ] 0.05 [.002] 10 plcs. 0.05 [.002] 13 plcs. 20.00 [.787] 10.00 [.394] 2.00 [.079] 2.80 [.110] 17.20 [.677] 23.00 [.906] 24.0 [0.94] 6.5 [0.26] 3.5 [0.14] ? 4.15 [0.16] 28.0 [1.10] 10.0 [0.39] 10.0 [0.39] pc board layout coupling type* part no. c, f 6-1393696-7 *f or coupling type see din 1.0/2.3 section. siemax connector, smt right-angle jack, 3 poles note: pa rt numbers are rohs compliant except: indicates non-rohs compliant.
between series adapters between series coaxial t ransmission line adapters provide convenient transi- tions between popular series coaxial connectors. the adapter design pro- vides a minimum length consistent with good electri- cal performance. the small size, low vswr, and broad frequency coverage permits a wide range of applications in both measurement and systems use. design and construction the standard units are constructed of stainless steel with passivated finish, nickel plated brass, and gold plated brass. the material and plating is to be consistent with the basic connector series. all dielectrics are tfe fluoro- carbon. the center con- tacts are made of beryllium copper, gold plated. t ypes the straight in-line adapters are available in many combinations of plug and jack (male and female) con- figurations. also, popular panel mount versions are cataloged. for special modifications and hermetic seal version, consult t yco electronics. application the major application is the requirement for a low vswr, compact transition in both test system and oper- ating systems. many panel mount and bulkhead mount versions are available so the designer can use small size connectors for internal design, but adapt to a larger rugged version for external connection. selection charts follow to help you find the correct adapter for your application. mcx page 253 n series page 253 bnc page 253 series 1.6/5.6 page 253 page 253 sma/sma 18 ghz page 253 page 253 page 253 page 253 page 253 page 253 page 253 plug-plug jack-jack qma series 1.0/2.3 ssmt smp sma smb 7-16 bnc osp bulkhead osp n series n series page 254 bnc page 254 page 256 tnc page 254 page 254 sma sma bulkhead page 254 page 255 page 254 page 254 sma 18 ghz page 254 and 255 and 256 and 255 page 255 page 255 page 255 series 1.0/2.3 page 256 series 1.6/5.6 series 1.0/2.3 ssmt smp smb 75 ohm smb 7-16 tnc tnc flange mount tnc bulkhead bnc bnc bulkhead osp osp bulkhead osp floating rear mount n series n series flange mount n series bulkhead mcx 251 catalog 1307191 dimensions are in millimeters dimensions are shown for usa: 1-800-522-6752 south america: 55-11-2103-6000 revised 3-07 and inches unless otherwise reference purposes only. canada: 1-905-470-4425 hong kong: 852-2735-1628 specified. values in brackets specifications subject mexico: 01-800-733-8926 japan: 81-44-844-8013 www.tycoelectronics.com are standard equivalents. to change. c. america: 52-55-1106-0803 uk: 44-8706-080-208 rf coax connectors
252 catalog 1307191 dimensions are in millimeters dimensions are shown for usa: 1-800-522-6752 south america: 55-11-2103-6000 revised 3-07 and inches unless otherwise reference purposes only. canada: 1-905-470-4425 hong kong: 852-2735-1628 specified. values in brackets specifications subject mexico: 01-800-733-8926 japan: 81-44-844-8013 www.tycoelectronics.com are standard equivalents. to change. c. america: 52-55-1106-0803 uk: 44-8706-080-208 rf coax connectors between series adapters (continued) 7 mm page 256 page 256 page 256 page 256 7 mm best vswr page 256 page 256 mcx page 256 n series n series flange mount page 256 page 257 page 257 page 257 page 257 osp osp bulkhead page 257 page 257 bnc page 257 page 257 page 257 page 259 tnc tnc flange mount page 258 page 258 page 258 page 258 smb 75 ohm smb page 259 page 258 sma sma flange mount page 258 sma 18 ghz page 259 page 258 and 259 page 260 page 258 page 259 page 259 page 259 page 259 page 259 smp page 260 ssmt page 260 din-series 1.0/2.3 page 260 din-series 1.6/5.6 page 259 page 260 qma page 260 umcc page 260 din-series 1.6/5.6 din-series 1.0/2.3 ssmt smp sma sma flange mount sma 18 ghz smb tnc bnc osp osp bulkhead n series n series flange mount mcx 7 mm best vswr 7 mm umcc jack-plug
between series adapters (continued) plug-plug mcx plug ?sma plug pa rt no. 1061071-1 19.3 [.760] ref. 6.4 [.250] hex. 7.9 [.312] hex. series 1.6/5.6 plug ?series 1.0/2.3 plug pa rt no. 2-1393670-1 coupling type a ? 10.8 [0.43] 28.0 [1.10] 9.2 [0.36] 8.9 [0.35] ? 6.5 [0.26] 1) 1) bnc plug ?smb plug pa rt no. 1058066-1 ? 14.3 [.562] ref. 34.1 [1.343] ref. 7-16 plug ?n series plug pa rt no. 1313453-1 48.6 [1.912] ref. ? 32.0 [1.260] ref. sma plug ?smp plug pa rt no. 1056706-1 17.5 [.690] ref. sma plug ?smb plug pa rt no. 1060494-1 21.9 [.862] ref. 6.4 [.250] hex. 7.9 [.312] hex. sma plug ?ssmt plug pa rt no. 1055695-1 13.7 [.538] ref. sma plug ?osp plug pa rt no. 1059711-1 17.0 [.670] ref. 7.9 [.312] hex. sma 18 ghz plug ?n series plug pa rt no. 1057367-1 ? 21.0 [.828] ref. hex. 32.5 [1.281] ref. 7.9 [.312] qma plug ?sma plug pa rt no. 1408393-1 30.60 [1.20] 8.70 [0.34] ref. sma plug qma plug hex. 7.90 [0.31] hex. bnc plug ?series 1.6/5.6 plug pa rt no. 1-1393665-4 ? 14.5 [0.57] 46.4 [1.83] ? 10.8 [0.43] 1) detent for jack note: pa rt numbers are rohs compliant except: indicates non-rohs compliant. 253 catalog 1307191 dimensions are in millimeters dimensions are shown for usa: 1-800-522-6752 south america: 55-11-2103-6000 revised 3-07 and inches unless otherwise reference purposes only. canada: 1-905-470-4425 hong kong: 852-2735-1628 specified. values in brackets specifications subject mexico: 01-800-733-8926 japan: 81-44-844-8013 www.tycoelectronics.com are standard equivalents. to change. c. america: 52-55-1106-0803 uk: 44-8706-080-208 rf coax connectors
254 catalog 1307191 dimensions are in millimeters dimensions are shown for usa: 1-800-522-6752 south america: 55-11-2103-6000 revised 3-07 and inches unless otherwise reference purposes only. canada: 1-905-470-4425 hong kong: 852-2735-1628 specified. values in brackets specifications subject mexico: 01-800-733-8926 japan: 81-44-844-8013 www.tycoelectronics.com are standard equivalents. to change. c. america: 52-55-1106-0803 uk: 44-8706-080-208 rf coax connectors between series adapters (continued) jack-jack 7-16 jack ?n series jack pa rt no. 1311206-1 51.0 [2.010] ? 14.3 [.562] ref. 32.1 [1.265] ref. bnc jack ?75 ohm smb jack pa rt no. 1311209-1 30.4 [1.197] 12.9 [.508] 3.82 [.150] 12.0 [.472] hex. 17.4 [.687] across flat ? 12.9 [.508] hex. 15.8 [.625] bnc jack ?smb jack pa rt no. 1058056-1 tnc jack ?n series flange mount jack pa rt no. 1057843-1 ? 3.2 [.125] 49.1 [1.932] 2.0 [.080] 16.7 [.656] 25.4 [1.00] 18.2 [.718] sq. ref. typ. 4 plcs. mcx jack ?sma jack pa rt no. 1061070-1 15.6 [.615] 6.4 [.250] hex. ? 22.0 [.866] max. panel 31.3 [1.232] min. ? 15.9 [.625] 6.3 [.250] 22.0 [.867] 13.6 [.534] min. 3.2 [.125] recommended mounting hole tnc jack ?bnc jack pa rt no. 1057845-1 ? 14.5 [.572] ref. ref. 43.1 [1.698] sma jack ?n series jack pa rt no. 1057341-1 ? 17.45 [.687] ref. 31.3 [1.231] sma jack ?n series bulkhead jack pa rt no. 1057463-1 sma jack ?n series flange mount pa rt no. 1057343-1 ? 3.2 [.125] 4 plcs. sq. 4.7 [.187] max. panel 31.3 [1.231] 18.2 [.718] 25.4 [1.00] sma jack ?bnc jack pa rt no. 1058058-1 ? 14.3 [.562] ref. 33.5 [1.320] bnc bulkhead jack ?sma jack pa rt no. 1058117-1 ? 12.7 [.500] 33.5 [1.320] ref. min. 17.9 [.703] hex. max. panel 15.9 [.625] hex. 17.4 [.687] 5.6 [.220] min. 3.2 [.125] recommended mounting hole tnc flange mount jack ?sma jack pa rt no. 1057841-1 ? 11.1 [.437] 25.4 [1.000] 2.4 [.093] 8.0 [.315] 17.4 [.687] 12.7 [.500] 4.8 [.188] max. panel sq. typ. note: pa rt numbers are rohs compliant except: indicates non-rohs compliant.
sma jack osp floating rear mount jack pa rt no. 1059724-1 + .076 ? .000 + .003 ?.000 ? 8.6 [.340 ] + .000 ? .127 + .000 ?.005 1.3 [.050 + .050 ? .000 + .002 ?.000 ? 8.0 [.316 ] ] 11.2 .076 [.440 .003 ] 22.2 [.874] ? 7.6 [.300] recommended mounting hole between series adapters (continued) jack-jack (continued) ? 16.7 [.656] ? 11.2 [.439] max. panel 33.0 [1.300] min. min. 5.0 [.196] hex. 14.3 [.562] 6.4 [.250] 3.2 [.125] recommended mounting hole smb jack ?sma jack pa rt no. 1060487-1 17.8 [.700] 6.4 [.250] hex. sma jack ?tnc bulkhead jack pa rt no. 1057908-1 sma jack ?smp jack pa rt no. 1056702-1 12.6 [.498] 4.70 [.187] sma jack ?ssmt jack pa rt no. 1055694-1 12.9 [.508] ref. osp jack ?sma bulkhead jack pa rt no. 1059733-1 recommended mounting hole + 0.03 ? 0.00 + .001 ?.000 ? 6.15 [.242 ] max. panel 17.3 [.680] 3.2 [.125] hex. 7.9 [.312] hex. 7.9 [.312] 5.8 [.230] sma 18 ghz jack ?n series jack pa rt no. 1058651-1 ? 17.4 [.687] ref. 31.2 [1.229] ref. sma 18 ghz jack n series flange mount jack pa rt no. 1058653-1 ? 3.2 [.125] ? 16.0 [.630] max. 4 plcs. sq. max. panel 31.2 [1.229] ref. 16.5 [.650] 2.0 [.080] 25.4 [1.000] typ. 18.2 [.718] 4.7 [.187] sma 18 ghz jack ?n series bulkhead jack pa rt no. 1058675-1 ? 22.0 [.866] ? 15.9 [.625] max. panel 31.3 [1.232] min. 13.6 [.534] min. 6.3 [.250] 22.0 [.867] 3.2 [.125] recommended mounting hole osp jack ?sma jack pa rt no. 1059707-1 ? 7.6 [.300] 14.1 [.554] sma jack ?osp bulkhead jack pa rt no. 1059729-1 recommended mounting hole + .003 ? .000 + .001 ?.000 ? 9.12 [.359 ] max. panel ref. 14.1 [.554] hex. 11.1 [.437] hex. 11.1 [.437] 6.4 [.250] 3.2 [.125] osp floating flange mount jack sma jack pa rt no. 1059731-1 recommended mounting hole + 0.03 ? 0.05 + .002 ?.001 ? 9.6 [.377 ] max. panel 22.2 [.874] 9.7 [.380] 14.2 [.560] 1.7 [.065] 14.2 [.560] ? 9.4 [.372] ? 19.1 [.750] ? 2.6 [.102] 2 plcs. 3.2 [.125] note: pa rt numbers are rohs compliant except: indicates non-rohs compliant. 255 catalog 1307191 dimensions are in millimeters dimensions are shown for usa: 1-800-522-6752 south america: 55-11-2103-6000 revised 3-07 and inches unless otherwise reference purposes only. canada: 1-905-470-4425 hong kong: 852-2735-1628 specified. values in brackets specifications subject mexico: 01-800-733-8926 japan: 81-44-844-8013 www.tycoelectronics.com are standard equivalents. to change. c. america: 52-55-1106-0803 uk: 44-8706-080-208 rf coax connectors
256 catalog 1307191 dimensions are in millimeters dimensions are shown for usa: 1-800-522-6752 south america: 55-11-2103-6000 revised 3-07 and inches unless otherwise reference purposes only. canada: 1-905-470-4425 hong kong: 852-2735-1628 specified. values in brackets specifications subject mexico: 01-800-733-8926 japan: 81-44-844-8013 www.tycoelectronics.com are standard equivalents. to change. c. america: 52-55-1106-0803 uk: 44-8706-080-208 rf coax connectors between series adapters (continued) jack-jack (continued) bnc jack series 1.6/5.6 jack pa rt no. 1-1393665-5 ? 9.6 [0.38] 45.4 [1.79] ? 8.2 [0.32] ? 11.0 [0.43] ? 14.5 [0.57] m9.0x0.5 [0.35]x[0.02] series 1.0/2.3 jack series 1.6/5.6 jack pa rt no. 2-1393670-4 coupling type a, b, f ? 4.1 [0.16] 39.4 [1.55] ? 10.8 [0.43] ? 8.2 [0.32] jack-plug n series plug to 7 mm jack pa rt no. 1061742-1 43.3 [1.705] ref. 19.1 [.750] hex. ? 22.4 [.880] ref. 30.7 [1.208] ref. ? 22.1 [.870] 11.1 [.437] hex. 19.1 [.750] hex. tnc plug to 7 mm jack pa rt no. 1061739-1 40.9 [1.610] ref. 19.1 [.750] hex. ? 22.4 [.880] ref. 15.9 [.625] hex. osp plug to 7 mm jack pa rt no. 1059713-1 tnc plug to 7 mm best vswr jack pa rt no. 1061744-1 40.9 [1.610] ref. 19.1 [.750] hex. ? 22.4 [.880] ref. 15.9 [.625] hex. 16.8 [.660] ref. 6.4 [.250] hex. 7.9 [.312] hex. n series jack ?7 mm plug pa rt no. 1061757-1 36.7 [1.445] ref. hex. 19.1 [.750] ref. ? 22.4 [.880] mcx jack ?sma plug pa rt no. 1061073-1 sma flange mount plug to 7 mm jack pa rt no. 1061751-1 ? 3.2 [.125] 4 plcs. sq. max. panel 35.0 [1.380] ref. 25.4 [1.000] hex. 7.9 [.312] typ. 19.1 [.750] hex. 19.1 [.750] ref. ? 22.4 [.880] 2.4 [.093] 2.1 [.083] ? 22.4 [.880] ref. 19.1 [.750] hex. 7.9 [.312] hex. 31.8 [1.25] ref. n series plug to 7 mm best vswr jack pa rt no. 1061738-1 43.3 [1.705] ref. 19.1 [.750] hex. ? 22.4 [.880] ref. sma plug to 7 mm jack pa rt no. 1053646-1 note: pa rt numbers are rohs compliant except: indicates non-rohs compliant.
between series adapters (continued) jack-plug (continued) n series jack ?7 mm best vswr plug pa rt no. 1061752-1 36.7 [1.445] ref. hex. 19.1 [.750] ref. ? 22.4 [.880] ? 16.8 [.660] ref. ref. 52.7 [2.076] n series jack ?tnc plug pa rt no. 1057388-1 ? 15.9 [.625] ref. ref. ref. ? 16.8 [.660] 51.9 [2.043] bnc plug ?n series jack pa rt no. 1057392-1 ? 17.45 [.687] ref. hex. 32.8 [1.292] max. 7.9 [.312] sma 18 ghz plug ?n series jack pa rt no. 1058664-1 ? 17.4 [.687] ref. 7.9 [.312] hex. 32.3 [1.270] ref. sma plug ?n series jack pa rt no. 1057381-1 sma plug ?n series flange mount jack pa rt no. 1057385-1 ? 3.2 [.125] 4 plcs. sq. max. panel 32.3 [1.270] ref. 25.4 [1.000] hex. 7.9 [.312] typ. 18.2 [.718] 4.7 [.187] osp jack ?7 mm plug pa rt no. 1059720-1 ? 22.4 [.880] ref. 19.1 [.750] hex. 11.1 [.437] hex. 29.6 [1.166] ref. sma plug ?osp jack pa rt no. 1059718-1 17.4 [.685] ref. 7.9 [.312] hex. ? 7.6 [.300] recommended mounting hole + 0.03 ? 0.00 + .001 ?.000 ? 9.12 [.359 ] max. panel 17.4 [.686] ref. 3.2 [.125] hex. 7.9 [.312] hex. 11.1 [.437] 6.4 [.250] bnc jack ?n series plug pa rt no. 1057390-1 ? 21.0 [.827] ref. ref. 49.1 [1.934] sma plug ?osp bulkhead jack pa rt no. 1059758-1 ? 14.3 [.562] ref. 35.8 [1.408] ref. sma plug ?bnc jack pa rt no. 1058083-1 ? 14.3 [.562] ref. ref. 34.6 [1.362] hex. 7.9 [.312] bnc jack ?smb plug pa rt no. 1058077-1 note: pa rt numbers are rohs compliant except: indicates non-rohs compliant. 257 catalog 1307191 dimensions are in millimeters dimensions are shown for usa: 1-800-522-6752 south america: 55-11-2103-6000 revised 3-07 and inches unless otherwise reference purposes only. canada: 1-905-470-4425 hong kong: 852-2735-1628 specified. values in brackets specifications subject mexico: 01-800-733-8926 japan: 81-44-844-8013 www.tycoelectronics.com are standard equivalents. to change. c. america: 52-55-1106-0803 uk: 44-8706-080-208 rf coax connectors
258 catalog 1307191 dimensions are in millimeters dimensions are shown for usa: 1-800-522-6752 south america: 55-11-2103-6000 revised 3-07 and inches unless otherwise reference purposes only. canada: 1-905-470-4425 hong kong: 852-2735-1628 specified. values in brackets specifications subject mexico: 01-800-733-8926 japan: 81-44-844-8013 www.tycoelectronics.com are standard equivalents. to change. c. america: 52-55-1106-0803 uk: 44-8706-080-208 rf coax connectors between series adapters (continued) jack-plug (continued) tnc jack ?7 mm plug pa rt no. 1061753-1 41.3 [1.625] ref. hex. 19.1 [.750] ref. ? 22.4 [.880] 41.3 [1.625] ref. hex. 19.1 [.750] ref. ? 22.4 [.880] tnc jack ?n series plug pa rt no. 1057387-1 ? 21.0 [.827] ref. ref. 49.1 [1.934] tnc jack ?7 mm best vswr plug pa rt no. 1061758-1 tnc flange mount jack ?sma plug pa rt no. 1057857-1 26.4 [1.038] 2.0 [.080] 13.4 [.529] 7.9 [.312] ? 11.8 [.465] hex. 17.4 [.687] sq. 12.7 [.500] typ. ref. ref. max. sma plug ?smb jack pa rt no. 1060500-1 20.7 [.815] ref. 6.4 [.250] hex. 7.9 [.312] hex. 18.2 [.716] 6.4 [.250] hex. sma 18 ghz jack ?n series plug pa rt no. 1057377-1 ? 21.0 [.828] ref. 31.5 [1.250] ref. sma jack ?mcx plug pa rt no. 1061072-1 ? 14.3 [.562] ref. 31.8 [1.250] ref. tnc plug ?sma jack pa rt no. 1057853-1 ? 15.9 [.625] ref. ref. 25.4 [1.000] sma jack ?bnc plug pa rt no. 1058081-1 sma jack ?smb plug pa rt no. 1060498-1 19.3 [.760] ref. 6.4 [.250] hex. 14.2 [.560] sma jack ?ssmt plug pa rt no. 1055696-1 10.5 [.413] ref. sma jack ?smp plug pa rt no. 1056707-1 note: pa rt numbers are rohs compliant except: indicates non-rohs compliant.
? 3.2 [.125] ? 12.7 [.500] min. panel hole 4 plcs. sq. max. panel 31.8 [1.250] 11.7 [.461] 2.0 [.080] 25.4 [1.000] typ. 18.2 [.718] 6.4 [.250] osp plug ?sma jack pa rt no. 1059716-1 6.4 [.250] ? 7.6 [.300] 13.7 [.538] n series flange mount plug sma 18 ghz jack pa rt no. 1058666-1 sma 18 ghz jack ?osp bulkhead plug pa rt no. 1059756-1 recommended mounting hole + 0.03 ? 0.00 + .001 ?.000 ? 6.15 [.242 ] 19.3 [.760] 1.7 [.065] 11.4 [.447] 3.2 [.125] max panel hex. 11.1 [.437] hex. 7.9 [.312] 16.0 [.632] ref. 7.90 [.312] hex. sma plug osmp jack ssmt jack ?sma plug pa rt no. 1055697-1 16.2 [.639] ref. sma plug ssmt jack smp jack ?sma plug pa rt no. 1056708-1 series 1.6/5.6 plug ?series 1.0/2.3 jack pa rt no. 2-1393670-2 coupling type a, b 2 , f 2 ? 10.8 [0.43] 33.0 [1.30] 9.2 [0.36] ? 4.1 [0.16] 1) bnc plug ?series 1.6/5.6 jack pa rt no. 1-1393665-6 ? 14.5 [0.57] 44.3 [1.74] ? 8.2 [0.32] bnc jack ?series 1.6/5.6 plug pa rt no. 1-1393665-7 ? 9.6 [0.38] 45.4 [1.79] ? 10.8 [0.43] ? 11.0 [0.43] ? 14.5 [0.57] between series adapters (continued) jack-plug (continued) sma flange mount jack ?7 mm plug pa rt no. 1061750-1 30.5 [1.200] 19.1 [.750] hex. ? 22.4 [.880] ref. ? 3.2 [.125] dia. 4 plcs. 2.0 [.080] 23.5 [.925] ref. 19.1 [.750] typ. 25.4 [1.000] sq. sma jack ?umcc plug pa rt no. 1775229-1 14.0 [.551] 5.6 [.220] 10.0 [.393] ? 5.3 [.208] ? 2.6 [.102] ? 6.25 [.246] 1/4-36uns sma jack ?umcc plug pa rt no. 1775230-1 14.0 [.551] 5.6 [.220] 10.0 [.393] ? 5.3 [.208] ? 2.5 [.098] ? 6.25 [.246] 1/4-36uns ? 22.4 [.880] ref. 19.1 [.750] hex. 30.9 [1.216] ref. sma 18 ghz jack ?7 mm plug pa rt no. 1053788-1 note: pa rt numbers are rohs compliant except: indicates non-rohs compliant. 259 catalog 1307191 dimensions are in millimeters dimensions are shown for usa: 1-800-522-6752 south america: 55-11-2103-6000 revised 3-07 and inches unless otherwise reference purposes only. canada: 1-905-470-4425 hong kong: 852-2735-1628 specified. values in brackets specifications subject mexico: 01-800-733-8926 japan: 81-44-844-8013 www.tycoelectronics.com are standard equivalents. to change. c. america: 52-55-1106-0803 uk: 44-8706-080-208 rf coax connectors
260 catalog 1307191 dimensions are in millimeters dimensions are shown for usa: 1-800-522-6752 south america: 55-11-2103-6000 revised 3-07 and inches unless otherwise reference purposes only. canada: 1-905-470-4425 hong kong: 852-2735-1628 specified. values in brackets specifications subject mexico: 01-800-733-8926 japan: 81-44-844-8013 www.tycoelectronics.com are standard equivalents. to change. c. america: 52-55-1106-0803 uk: 44-8706-080-208 rf coax connectors between series adapters (continued) jack-plug (continued) series plug 1.0/2.3 ?series 1.6/5.6 jack pa rt no. 2-1393670-3 coupling type a, b 2 , f 2 1) detent for jack 2 only jackside ? 6.5 [0.26] 34.5 [1.36] 8.9 [0.35] ? 8.2 [0.32] ? 10.8 [0.43] 1) qma jack ?sma plug pa rt no. 1408343-1 21.50 [0.85] 7.90 [0.31] ref. qma jack sma plu g hex. 6.35 [0.25] hex. umcc jack ?sma plug pa rt no. 1775228-1 10.60 [.417] 8.0 [.315] hex. 1.10 [.043] ? 2.00 [.078] umcc jack ?sma plug pa rt no. 1775227-1 10.60 [.417] 8.0 [.315] hex. 1.10 [.043] ? 1.90 [.074] note: pa rt numbers are rohs compliant except: indicates non-rohs compliant.
coaxial terminations sma plug terminator part number 1460802 plating ?gold frequency ?6 ghz 3.40 [.134] max. 11.00 [.433] max. 2.50 [.098] max. coupling nut shell center conductor dielectric sw 8 h11 smc plug terminator part number 1460803 plating ?gold frequency ?6 ghz 13.00 [ .512 ] max. sw 6 h11 + 0.10 ? 0.30 + .004 ?.012 3.30 [.130 ] coupling nut shell center conductor dielectric push pull plug terminator part number 619219 plating ?gold frequency ?6 ghz 17.70 [.697] ref. ? 8.30 [.327] ? 7.70 [.303] 8.00 [.315] 5.50 [.217] qma plug terminator part number 619271-1 single packaging plating ?standard gold part number 5-619271-1 1000 pieces per pack plating ?standard gold part number 619271-2 single packaging plating ?higher gold part number 5-619271-2 1000 pieces per pack plating ?higher gold 19.80 [.780] ? 10.50 [.413] note: pa rt numbers are rohs compliant except: indicates non-rohs compliant. 261 catalog 1307191 dimensions are in millimeters dimensions are shown for usa: 1-800-522-6752 south america: 55-11-2103-6000 revised 3-07 and inches unless otherwise reference purposes only. canada: 1-905-470-4425 hong kong: 852-2735-1628 specified. values in brackets specifications subject mexico: 01-800-733-8926 japan: 81-44-844-8013 www.tycoelectronics.com are standard equivalents. to change. c. america: 52-55-1106-0803 uk: 44-8706-080-208 rf coax connectors
262 catalog 1307191 dimensions are in millimeters dimensions are shown for usa: 1-800-522-6752 south america: 55-11-2103-6000 revised 3-07 and inches unless otherwise reference purposes only. canada: 1-905-470-4425 hong kong: 852-2735-1628 specified. values in brackets specifications subject mexico: 01-800-733-8926 japan: 81-44-844-8013 www.tycoelectronics.com are standard equivalents. to change. c. america: 52-55-1106-0803 uk: 44-8706-080-208 rf coax connectors application tooling fixture sub-assembly center contact holder locator tool solder gage inserts description model part no. nsn no. center contact holder t-4580 1055474-1 fixture sub-assembly t-4567 1055439-1 inserts ?2.16 [.085] (2) t-4700-2 5120-00-132-6808 1055441-1 inserts ?3.66 [.141] (2) t-4700-1 5120-00-132-6807 1055440-1 locator tool t-4596 1055476-1 locator tool t-4574 1055477-1 solder gage .813 [.032] t-4562-6 1055475-1 all tools may be purchased separately. for installation of tnc series connectors to 3.66 [.141] and 2.16 [.085] diameter semi- rigid cable. most bnc series connectors can also be assembled using this kit. see appropriate assembly procedure for specific tooling. this kit contains: installation kit part no. 1055469-1 for tnc connectors
universal compression crimp tool kit part number 1055835-1 t yco electronics universal compression crimp tool offers the ability to rapidly produce cable assemblies using solderless compres- sion crimp connectors with semi-rigid cables. this uni- versal assembly tool kit will attach sma, osp, n and tnc series connectors to 3.58 [.141], 2.16 [.085] and 6.35 [.250] cable quickly and consistently with excellent mechanical and electrical results. the tool kit permits single hand assembly. anvils and cable supports can be quickly changed. crimp lengths can be adjusted from .025 [.001] to 25.4 [1.000] in increments of .025 [.001]. sharp radius bends in cables are easily accommodated. the kit contains: item description part no. center contact holder 1055454-1 dielectric insert tool 1055448-1 1055447-1 dielectric recess tool 1055450-1 fixture sub-assembly 1055439-1 inserts ?2.16 [.085] (2) 1055441-1 inserts ?3.58 [.141] (2) 1055440-1 1055442-1 locator tool 1055443-1 1055446-1 1055451-1 retainer ring pliers 1055449-1 solder gauge 0.25 [.010] 1055500-1 solder gauge 0.38 [.015] 1055445-1 solder gauge 0.46 [.018] 1055444-1 description part no. crimp frame 1055831-1 calibration gauge 1055832-1 3.58 [.141] cable support 1055833-1 2.16 [.085] cable support 1055834-1 sma plug anvil 1055836-1 sma jack anvil 1055837-1 t ype n plug anvil 1055838-1 t ype n jack anvil 1055839-1 tnc plug anvil 1055840-1 tnc jack anvil 1055841-1 osp plug anvil 1055842-1 osp jack anvil 1055843-1 all tools may be purchased separately. crimp frame gauge anvil cable supports inserts locator tools retainer ring pliers fixture sub-assembly solder gage dielectric recess tool center contact holder dielectric insert tool solder assembly kit brass sma connectors kit part number 1055420-1 263 catalog 1307191 dimensions are in millimeters dimensions are shown for usa: 1-800-522-6752 south america: 55-11-2103-6000 revised 3-07 and inches unless otherwise reference purposes only. canada: 1-905-470-4425 hong kong: 852-2735-1628 specified. values in brackets specifications subject mexico: 01-800-733-8926 japan: 81-44-844-8013 www.tycoelectronics.com are standard equivalents. to change. c. america: 52-55-1106-0803 uk: 44-8706-080-208 application tooling (continued) rf coax connectors
264 catalog 1307191 dimensions are in millimeters dimensions are shown for usa: 1-800-522-6752 south america: 55-11-2103-6000 revised 3-07 and inches unless otherwise reference purposes only. canada: 1-905-470-4425 hong kong: 852-2735-1628 specified. values in brackets specifications subject mexico: 01-800-733-8926 japan: 81-44-844-8013 www.tycoelectronics.com are standard equivalents. to change. c. america: 52-55-1106-0803 uk: 44-8706-080-208 application tooling (continued) rf coax connectors crimping tools idc tool for assembling idc coaxial connectors series 1.6/5.6 ms on coaxial cables. l 50.0 [1.97] 6.6 [0.26] 1 2 3 hexagon profile no. with open jaws part no. 1-1393524-1 225.0 [8.86] item width across flats of the profile dim. color of part no. 12 3 l handles crimping tool 2.8 3.2 3.6 214.0 green 1393524-4 0.11 0.13 0.14 8.43 crimping tool 2.8 5.4 4.5 260.0 y ellow 1393524-5 0.11 0.21 0.18 10.24 crimping tools are used for assembling coaxial connec- tors on coaxial cables. they can be applied particularly economically for small batch sizes. the crimping dies are a fixed part of the crimping tools. each tool is equipped with 2 or 3 different profiles. a total of 6 widths across flats are possible with 2 tools, whose hand lengths are adapted to the dimen- sions of the hexagon pro- files. the tools can be distinguished at a glance by different colored handles. item part no. removal tool length 70 [2.76] 2-1393524-4 length 200 [7.87] 2-1393524-6 spare part f errule 2-1393524-7 removal tool for replacing the special contacts on connectors din 41612 m and siedecon. 12.5 [0.49] 70.0 [2.76] ferrule (spare part) 1.4 [0.04] 200.0 [7.87] 12.5 [0.49]
265 catalog 1307191 dimensions are in millimeters dimensions are shown for usa: 1-800-522-6752 south america: 55-11-2103-6000 revised 3-07 and inches unless otherwise reference purposes only. canada: 1-905-470-4425 hong kong: 852-2735-1628 specified. values in brackets specifications subject mexico: 01-800-733-8926 japan: 81-44-844-8013 www.tycoelectronics.com are standard equivalents. to change. c. america: 52-55-1106-0803 uk: 44-8706-080-208 application tooling (continued) item part no. setting gauge for types m 1393494-9 m/2 1-1393494-0 m/3 1-1393494-1 note: these gauges can also be used to pro- tect types c, c/2, c/3 and d. setting gauge protective caps/setting gauges the setting gauges are used to position coaxial jacks and pre-mating high-current plugs on male connectors din 41612 m if the pins are flow-soldered into pc boards. the gauges are held by clamping in connector body and protect the blade contacts. the gauges provide protection ?during transport (if the male connectors have already been removed from the packaging), ?during assembly, ?against soiling, ?during soldering. ecn1225-p pc board setting gauge male connector din 41612m used to tighten the threaded rings 1-1393562-0 on bulkhead jacks series 1.6/5.6. item part no. wrench 1393524-1 used to tighten the threaded ring on bulkhead jack 1393670-8. item part no. wrench 1393488-4 used to tighten the threaded ring on bulkhead jacks series 1.0/2.3 item part no. wrench 1393488-3 wrench 5.6 [0.22] 1.0 [0.04] 6.7 [0.26] 50.0 [1.97] 1.0 [0.04] 6.1 [0.24] 1.2 [0.05] 7.3 [0.29] 50.0 [1.97] 1.5 [0.06] ecn1230-q 11.0 [0.43] 0.91 [0.36] 0.9 [0.04] 1.35 [0.05] 40.0 [1.57] movable 50.0 [1.97] 50.0 [1.97] rf coax connectors
266 catalog 1307191 dimensions are in millimeters dimensions are shown for usa: 1-800-522-6752 south america: 55-11-2103-6000 revised 3-07 and inches unless otherwise reference purposes only. canada: 1-905-470-4425 hong kong: 852-2735-1628 specified. values in brackets specifications subject mexico: 01-800-733-8926 japan: 81-44-844-8013 www.tycoelectronics.com are standard equivalents. to change. c. america: 52-55-1106-0803 uk: 44-8706-080-208 application tooling (continued) rf coax connectors hand tools t yco electronics pro-crimper ii hand tools are econ- omy versions of our tyco electronics certi-crimp hand t ools, featuring ratcheted crimp control to provide full die closure and help eliminate partial crimps. with an all new design, the pro-crimper ii hand tools require dra- matically less hand force to produce the same connection as comparable tools. dies are interchangeable. its the most versatile and reliable crimping tool in the mid-price class. recommended for networking installations, and commercial, industrial and institutional maintenance work. see catalog 82276 for further information. t ypical pro-crimper iii hand tool no. 58433-1 for 50 ohm bnc dual ??crimp commercial connectors t yco electronics certi-crimp hand tools are our top-of- the-line crimping tools featuring the original ratcheted crimp control. all tools are designed to exacting specifications, and manufactured using the highest quality materials to provide long service life. recommended for low production runs, r epairs and prototype work, and applications requiring con- sistent, highly-reliable terminations. see catalog 65780 for further information. t ypical certi-crimp hand tools with integral (non-interchangeable) dies no. 69477-1 f or 50 ohm bnc dual crimp mil type connectors no. 220015-1 f or 50 ohm n connectors certi-crimp hand tool with interchangeable dies no. 69710 pneumatic tools the 626 pneumatic tool system, as the name implies, will apply a broad range of products in the 6-26 awg [13-0.12 mm 2 ] wire range. a basic 626 pneumatic tool system r equires a power unit, a tool holder, a crimp head assembly and a die set when applicable. this premium system is well suited for low- to medium- volume production and harness assembly operations. since the crimp head can be rotated to any angle, the operator can also work on more difficult terminations in confined equipment cabinets or enclosures. interchangeable tool holder assemblies and crimping heads are available to crimp a variety of products. crimping heads for the earlier model 2614 pneumatic power unit can be used with the 626 pneumatic tool system. if you are already using tyco electronics hand tools, many crimp heads and die sets can be removed, attached to an adapter with quick pins and used with the 626 pneumatic tool system. an adapter is even available to accept lower cost die sets of the pro-crimper ii hand tool. for more information, order catalog 124208. bench mount assembly for pneumatic tool system (optional) fully adjustable stand allows operator free use of both hands ?recommended for maximum productivity. no. 856402-1 pa rt number 1725837-1 pa rt number 1213890-1 (open barrel) battery powered crimp tool t ake automatic crimping away from the bench to the product, with this convenient, portable, battery-operated tool. its at home in the factory or in the field. ?completely portable performs about 100 crimps per charge ?terminates wires to 10 a wg [6 mm 2 ] ?weighs only 1.57 kg [3.46 lb] including battery; 360 mm [14.2 in] long ?pressure-sensitive cycle control ?kit includes tool, 2 batter- ies, and charger no. 189721-1
267 catalog 1307191 dimensions are in millimeters dimensions are shown for usa: 1-800-522-6752 south america: 55-11-2103-6000 revised 3-07 and inches unless otherwise reference purposes only. canada: 1-905-470-4425 hong kong: 852-2735-1628 specified. values in brackets specifications subject mexico: 01-800-733-8926 japan: 81-44-844-8013 www.tycoelectronics.com are standard equivalents. to change. c. america: 52-55-1106-0803 uk: 44-8706-080-208 application tooling (continued) bench-mounted machines amp-o-lectric bench-mounted, semi-automatic terminating machines may be used to apply rf products such as commercial bnc and tnc connectors, miniature and standard uhf connectors, and braid-pic contacts and terminals. the model g unit features interchangeable applicators, and is used to apply strip-form contacts. the ?oax?unit is used to apply loose-piece contacts and ferrules with dies that are mounted onto the machine. see catalog 65828 and customer manual 409-2627 for further information. amp-o-lectric model g, no. 354500 series with t yco electronics crimp quality monitor semi-rigid cable tooling the tools listed here are designed specifically to strip and terminate semi-rigid cable. these tools operate basically the same as the flexible cable tools, in that they produce uni- form terminations time after time, without heat damage from soldering. hand tool for bnc and tnc semi-rigid cable connectors no. 59980-1 frame only does not include dies and locator stripping tools the hand-operated tyco electronics coaxial cable stripper features interchangeable, color-coded blade cas- settes and v-blocks to accommodate 2- or 3-step stripping for cable diameters ranging from 2.54 [.10] through 7.62 [.30]. you strip cable by simply clamping and rotating the tool around the cable. see instruction sheet is 2766 for further information. for use with t ool no. connector type bnc single crimp 603995-1 bnc commercial and 603995-2 uhf miniature uhf standard 603995-3 bnc mil type dual crimp 603995-5 bnc commercial dual crimp 603995-6 rf coax connectors
268 catalog 1307191 dimensions are in millimeters dimensions are shown for usa: 1-800-522-6752 south america: 55-11-2103-6000 revised 3-07 and inches unless otherwise reference purposes only. canada: 1-905-470-4425 hong kong: 852-2735-1628 specified. values in brackets specifications subject mexico: 01-800-733-8926 japan: 81-44-844-8013 www.tycoelectronics.com are standard equivalents. to change. c. america: 52-55-1106-0803 uk: 44-8706-080-208 application tooling (continued) rf coax connectors hand tool kit for sma and blindmate connectors no. 59981-1 pneumatic tool for terminating bnc, tnc, sma and blindmate connectors (for rg 402/u and rg 405/u cable) no. 58318-1* this pneumatic tool is a bench-mounted, semi-automatic power tool designed for easy operation. the operator needs only to depress the trigger to complete a termination. it is used with the cable preparation machine to produce finished terminations. *includes locators 220241-1 and 308075-2. dies are not included. part numbers item description t yco electronics military (m22520/) hand tool 59980-1 36-01 plug locator 220220-2 36-06 (without center contact) plug locator 220221-2 36-04 (with center contact) ja ck locator 220222-2 36-05 die set for rg 402/u cable 312253-1 36-03 (3.58 [.141] o.d.) die set for rg 405/u cable 312253-2 36-02 (2.18 [.086] o.d.) cutoff fixture 311395-1 36-09 cable dressing fixture 311396-1 36-07 tr immer tool 312317-1 36-08 cable bend fixture assembly 220224-1 36-10 includes following 6 items: bend segment, rg 402/u 311386-1 36-11 (3.18 [.125] radius) bend segment, rg 402/u 311386-2 36-12 (6.35 [.250] radius) bend segment, rg 405/u 311386-3 36-13 t ool holder 311392-1 limiting pin 307581-1 conforming block 312067-1 hex wrench 21027-6 carrying case 13126-1 insert, case 13127-1
269 catalog 1307191 dimensions are in millimeters dimensions are shown for usa: 1-800-522-6752 south america: 55-11-2103-6000 revised 3-07 and inches unless otherwise reference purposes only. canada: 1-905-470-4425 hong kong: 852-2735-1628 specified. values in brackets specifications subject mexico: 01-800-733-8926 japan: 81-44-844-8013 www.tycoelectronics.com are standard equivalents. to change. c. america: 52-55-1106-0803 uk: 44-8706-080-208 rf coax connectors cable assembly capabilities when your rf application demands a high perform- ance cable assembly, make tyco electronics your advantage. we specialize in solving tough problems with assemblies designed and manufactured to the most demanding r equirements. why t yco electronics? quite simply, because we can give you a comprehensive engineered solution to your application needs. by pro- viding a precise match between cable, connector and application, we supply cable assemblies that meet your exact needs. every cable assembly application is unique. a tyco electronics custom solution can be designed to meet your special require- ments ?whether these are related to return and insertion loss, propagation delay and phase matching, shielding and emi, or spe- cial mechanical issues like density, latching, appear- ance, flexibility, or even weight. we approach your cable assembly individually, using the vast resources and knowledge gained from years of experience gener- ating custom solutions. by making tyco electronics your partner in cable assembly design, you r educe risk and gain the assurance that you will r eceive assembly on time, to specification and within your budget. t yco electronics offers a wide range of rf/coax cable assemblies including 50 and 75 ohm solutions, from micro-miniature umcc and ssmt to high power assemblies using n-series and din 7/16 connectors. furthermore, we use a variety of cable types to meet unique requirements from standard military quali- fied rg cable to low loss foamed pe and ptfe tape wrapped cable as well as semi-rigid. our engineering experts will find the right combination of materials to provide a solution that is cost effective.
270 catalog 1307191 dimensions are in millimeters dimensions are shown for usa: 1-800-522-6752 south america: 55-11-2103-6000 revised 3-07 and inches unless otherwise reference purposes only. canada: 1-905-470-4425 hong kong: 852-2735-1628 specified. values in brackets specifications subject mexico: 01-800-733-8926 japan: 81-44-844-8013 www.tycoelectronics.com are standard equivalents. to change. c. america: 52-55-1106-0803 uk: 44-8706-080-208 rf coax connectors cable assembly capabilities (continued) utilizing network analyzers, tdr, and intermodulation test equipment to mention a few, our testing capability allows extensive electrical and environmental charac- terization of your assembly. we offer full test capabilities right in our manufacturing facilities. tests such as those listed below can be an integral part of the man- ufacturing process: vswr, return loss, insertion loss, phase matching, propagation delay, impedance, passive intermodulation. our cable manufacturing centers are designed to meet your production r equirements and delivery needs. our global loca- tions, combined with t yco electronics logistic strengths assures you will get the product where and when you need it. harrisburg, pa product management product development prototyping, samples diecasting stamping plating cable assembly ooskampt, belgium product management product development screw machining plating assembly norwood, ma product development screw machining plating connector and cable assembly, quick turn t aipei, taiwan product management product development hermosillo, mexico connector assembly cable assembly k unshan, china product development screw machining connector and cable assembly shanghai, china connector assembly shenzhen and hangzhou, china connector assembly te sla, czech republic connector assembly brazil cable assembly switzerland development eng. screw machining assembly
271 catalog 1307191 dimensions are in millimeters dimensions are shown for usa: 1-800-522-6752 south america: 55-11-2103-6000 revised 3-07 and inches unless otherwise reference purposes only. canada: 1-905-470-4425 hong kong: 852-2735-1628 specified. values in brackets specifications subject mexico: 01-800-733-8926 japan: 81-44-844-8013 www.tycoelectronics.com are standard equivalents. to change. c. america: 52-55-1106-0803 uk: 44-8706-080-208 rf coax connectors coaxial cable assembly specification guide please use this handy r eference guide when specifying or building your new cable assembly. length label (optional) heat shrink (optional) a b connector a interface e xample: bnc, mcx, sma, etc. style e xample: straight plug, right-angle plug, bulkhead jack, etc. heat shrink ? marking connector b interface e xample: bnc, mcx, sma, etc. style e xample: straight plug, right-angle plug, bulkhead jack, etc. heat shrink ? marking cable length (inch/mm) rg type or cable mfg. mfg. part no. or frequency range (mhz/ghz) impedance ohms insertion loss db shielding effectiveness db temp. range (?/?) max. avg. power handling* w att * 25? at sea level and max. specified frequency electrical specifications vswr or return loss insertion loss delay insertion phase intermodulation label ? marking o ther specifications
272 catalog 1307191 dimensions are in millimeters dimensions are shown for usa: 1-800-522-6752 south america: 55-11-2103-6000 revised 3-07 and inches unless otherwise reference purposes only. canada: 1-905-470-4425 hong kong: 852-2735-1628 specified. values in brackets specifications subject mexico: 01-800-733-8926 japan: 81-44-844-8013 www.tycoelectronics.com are standard equivalents. to change. c. america: 52-55-1106-0803 uk: 44-8706-080-208 rf coax connectors appendix a - theory and application theory and application as a leading manufacturer of rf products, tyco electronics produces a large variety of coaxial connectors. the proper selection and application of these connectors requires a knowl- edge of factors not involved in other types of connectors and terminals. the following paragraphs have been prepared to improve understanding of the theory behind rf connectors: basic rf theory 1 rf energy travels by electromagnetic waves, and it is pri- marily the frequency of these waves that we are interested in. briefly, if an oscillating voltage source is connected to a cable, a continuous electromagnetic wave will propagate along the cable. a sensor placed at some point on the cable would indicate a varying voltage (e field) as well as a current and magnetic field (h field) as the wave travels past it. this is called an electromagnetic wave because both electric and magnetic fields are varying. the wave shape is initially determined by the variation of the source with time. figure 7 shows the radiant energy spectrum. visible light, radio, television, x-rays and gamma rays are all phenome- non of electromagnetic waves at different frequencies. this introduction will treat only those that are generated by an electrical source and propagated along a physical cable or other transmission media. that is, frequencies above zero and up to about 50 gigahertz. 1 the majority of the technical terms, relative to rf and coaxial cable and connectors, used here-in and throughout this catalog are defined in the glossary (appendix g) starting on page 301. 0 - 29.9 vlf commercial ac electricity, deep khz (very low depth sounders, ultrasonic frequency) grinders, sonic oscillators 30 - 299.9 lf shallow-to-medium depth sounders khz (low sonar frequency) 300 - 2999.9 mf commercial am radio broadcasting, khz (medium marine radio telephone, direction frequency) finders 3 - 29.9 hf citizen band radio, amateur radio, mhz (high international broadcasting frequency) 30 - 299.9 vhf vhf television (channels 2 thru mhz (very high 13), commercial fm radio frequency) broadcasting, amateur radio, fire and police radio 300 - 2999.9 uhf uhf television (channels 14 thru mhz (ultra-high 83), microwave ovens, aeronautical frequency) radionavigation 3 - 29.9 shf microwave communications, marine ghz (super high radar, aircraft tracking and frequency) airborne radars 30 - 299.9 ehf space communications, radio ghz (extremely high astronomy frequency) notes: 1. khz = kilohertz (1 thousand cycles per second) 2. mhz = megahertz (1 million cycles per second) 3. ghz = gigahertz (1 billion cycles per second) frequency or wa velengths designation applications figure 7 radiant energy spectrum in the following paragraphs we will discuss waves in greater detail, including the relationship of frequency and wave length, how pulses are formed and used, how each differs from the other and the problems involved in their transmission. sine waves an rf wave is a sine wave, meaning that it smoothly swings from zero to a positive peak value, then back down past zero to a negative peak value, then back to zero to com- plete a 360 electrical degree cycle. the positive and nega- tive peaks are always equal in amplitude. the two qualities which characterize this type of wave are amplitude and fre- quency (f). figure 8 shows these two characteristics. amplitude refers to the peak value attained by the wave and corresponds to voltage. frequency refers to the number of oscillations per second. for example, the sign wave in figure 8(b) has completed 12 cycles in one second. therefore, we would say that this wave has a frequency of 12 cycles per second or 12 hertz. the time for one com- plete cycle is defined as the period (t). the relationship between the period and frequency is given by the equation: f = 1 / t in hertz a peak positive amplitude peak negative amplitude one cycle 1 2 3 4 56 7 8 9 10 11 12 b figure 8 t ypical sine wave characteristics no. of cycles 1 second 1 2 3 4 5 6 7 8 9 10 11 12 the wave travels away from the generator at speeds approach- ing the speed of light. when an electromagnetic wave travels in a medium other than air or vacuum, the speed for the wave is r educed by a factor of the square root of the dielectric constant ( . the velocity (v) of the propagation of a signal is given by: c v= __ where c is the speed of light, 3 x 10 8 m/sec or 1.18 x 10 10 in/sec, and is the dielectric constant of the medium. (see table 1 for dielectric constants of various materials) the wavelength of a signal is given by the formula c 1.18 x 10 10 = v/f = __________ _________ inches x f (ghz) x f (ghz) see figure 9
appendix a - theory and application (continued) inches wavelengths 1000 100 10 1 0.1 .001 ghz .01 ghz .1 ghz 1 ghz 10 ghz 100 ghz teflon (e=2.03) air (e=1.00) frequency (mhz) figure 9 frequency (mhz) tab le 1. properties of insulating materials pulses the sine wave is most often used for communication purposes where intelligence is imposed on the wave by a variation in amplitude (amplitude modulation, am) or by a variation in frequency (frequency modulation, fm). pulses, on the other hand, are primarily used in computers and digital instrumentation. since pulses are generally used for triggering purposes, the pulse rise/fall time, amplitude and width are the most important. figure 10 shows a pulse and identifies these characteristics. width amplitude 90% 90% 10% 10% repetition rate fall time rise time figure 10 pulse characteristics notice that rise time is the time required for the pulse to rise from 10% to 90% of its amplitude - not from zero to maximum. rise and fall time is perhaps the single most important characteristic of a pulse in todays high-speed digital equipment. figure 11 shows that the faster the rise and fall time, the more pulses will fit in a given time frame. figure 11 pulse rise and fall time time time b a the bit rate for a system is the maximum rate of pulses per second that a system can process without causing data errors. the maximum performance can also be specified in terms of baud rate. the baud rate is defined as the number of characters (bytes) that are transmitted per sec- ond. generally a character represents 10 bits (7 bits for the information, one parity bit, and two for start and stop, totalling 10). now that we know why fast pulses are required, the next problem is how to obtain faster rise times. a pulse is made up of a great number of different frequencies, and the more high frequencies a pulse contains, the faster will be its rise time and the flatter will be its peak. to better understand this, refer to figure 12. at a, you will see a fundamental frequency (1), its third harmonic (3), and the r esultant waveform (s3), which is a combination of 1 and 3. although this does not yet resemble a square wave, you will note that the rise time is decreased, and a dip appears at the peak. at b of figure 12, we have added the fifth harmonic. rise time is further decreased, and the peak is beginning to flatten out. at c the seventh har- monic has been included, and the resultant wave s7 begins to resemble a square wave. as more high fre- quency harmonics are added to the waveform, it will more closely resemble a square wave, and the squarer it becomes, the faster will be the rise time. dielectric dielectric operating material constant temperature range _________ _________ __________________ tfe 2.03 -70 +250? polyethylene 2.3 -60 +80? nylon 4.6-4.0 -40 +120? tpx 2.12 -65 +85? polypropylene 2.25 -40 +105? acetal 3.7 -65 +85? 273 catalog 1307191 dimensions are in millimeters dimensions are shown for usa: 1-800-522-6752 south america: 55-11-2103-6000 revised 3-07 and inches unless otherwise reference purposes only. canada: 1-905-470-4425 hong kong: 852-2735-1628 specified. values in brackets specifications subject mexico: 01-800-733-8926 japan: 81-44-844-8013 www.tycoelectronics.com are standard equivalents. to change. c. america: 52-55-1106-0803 uk: 44-8706-080-208 rf coax connectors tpx is a trademark of mitsui chemicals america, inc.
274 catalog 1307191 dimensions are in millimeters dimensions are shown for usa: 1-800-522-6752 south america: 55-11-2103-6000 revised 3-07 and inches unless otherwise reference purposes only. canada: 1-905-470-4425 hong kong: 852-2735-1628 specified. values in brackets specifications subject mexico: 01-800-733-8926 japan: 81-44-844-8013 www.tycoelectronics.com are standard equivalents. to change. c. america: 52-55-1106-0803 uk: 44-8706-080-208 rf coax connectors appendix a - theory and application (continued) fast rise times and short pulse widths require high fre- quency components. t wo frequent causes of digital signal degradation can be (1) high capacitance of the transmission line and (2) impe- dence mismatches of connector transmission line or i/0 devices. selection of an impedance-matched connector on a digital line, especially if short cable assemblies are used, can be as important as connector selection for an rf modulated line. reflected pulses out of phase with the original pulse can cause false signals or high error rates in a digital system. since pulses with fast rise times are necessary in high- speed computers, any circuit element which could reduce or attenuate high frequency response is undesirable. a figure 12 development of a square wave s3=1+3 1 3 s3 5 s5 s7=1+3+5+7 7 s5=1+3+5 b c signal integrity and propagation to explain how to maintain signal integrity, it is necessary to review how the signal is configured in a cable and how it propagates. ignoring digital signals for this discussion we will identify the issues that deal with the integrity of a sine wave. consider a coaxial cable consisting of an inner conductor surrounded by a dielectric material and then an outer conductor (see figure 13). the outer conductor may be a braid, a foil, or a solid metal. d figure 13 diagram of a cable outer conductor center conductor dielectric material d the alternating current on a conductor is not spread throughout the conductor but is strongest at the surface and decays exponentially at points further into the conduc- tor. this is called the skin effect. at a frequency of 1mhz, three skin depths is 0.0078?(95% of the current is within three skin depths of the surface) and at 10ghz three skin depths is 0.00078? as a result, the current is on the outer surface of the inner conductor and the inner surface of the outer conductor over the entire range of interest for most rf systems. the dimensions and material beyond several skin depths have no effect on the wave; gold plated plastic will propagate as well as gold plated copper at sufficiently high frequencies. figure 14 electric field (e) and magnetic field (h) belonging to the principal mode in a coaxial line. h e v an electromagnetic wave traveling in a coaxial cable pro- duces an electric and a magnetic field between the inner conductor and the outer conductor (figure 14). the electric (e field) is radial and varies in time. an alternating current flows along the inner conductor and the outer conductor. an oscillating magnetic field (h field) circles the inner conductor.
appendix a - theory and application (continued) attenuation a wave loses energy (attenuates) in several ways: (1) the r esistance of the inner and outer conductors is small but can be significant over long lengths and will produce some heat. (2) the dielectric may be lossy; its resistance is high but not infinite, and some energy is lost. (3) electromagnetic energy radiates at high frequencies; significant energy losses are caused by radiation of electromagnetic energy (the cable acts like an antenna). (4) energy is reflected due to impedance mismatches. the combination of these four types of losses are referred to as the insertion loss of a transmission line system. connectors have similar losses. characteristic impedance a parameter which defines the behavior of a cable, connector, or any propagating system is characteristic impedance , zo. the characteristic impedance of a loss- less cable is related to the inductance per unit length, l, and the capacitance per unit length, c, as follows: zo = l/c in ohms the equivalent circuit of a transmission line is shown in figure 15. r represents the conductor resistance for a unit length for a coaxial cable the characteristic impedance is given by: 138 d zo = x log 10 in ohms d where d is the inner diameter of the outer conductor and d is the outer diameter of the inner conductor, respectively. similar equations apply for other geometries such as two parallel wires. figure 15 t ypical transmission line schematic the maximum power is transferred between two systems if they have the same impedance. this is called impedance matching. however, impedance variations that are short compared to a wavelength can have a negligible effect on signal loss. standard impedances are 50 ohm, 75 ohm and 93-125 ohm. most systems use 50 ohm because it is a compro- mise between maximum power transmission and minimum line loss. the telephone industry and the broadcast indus- try use 75 ohm for minimum line attenuation. the need for low capacitance instrumentation cable has produced the 93-125 ohm systems. the higher impedances are gener- ally achieved by changing the conductor diameters and by modifying the dielectric material to add air. lr c z 0 reflections when the characteristic impedance changes in a transmis- sion line system, part of an incident wave is reflected. the r eflection coefficient can be calculated as: v i z r - z o reflection coefficient = = _____ = _______ v r z r + z o where vi and zo are the incident voltage and impedance of the first media. v r and z r r epresent the reflected voltage and impedance of the media that caused the reflection. the decibel loss due to reflection is given by: 1 return loss = 10 log 10 ( ____ ) db 1- 2 vswr the traditional way to determine the re flection coefficient is to measure the standing wave caused by the superposition of the incident wave and the reflected wave. traditionally the voltage is measured at a series of points using a slotted line. the ratio of the maximum divided by the minimum is the voltage standing w ave ratio (vswr). the vswr is infinite for total reflections because the minimum voltage is zero. if no re flection occurs the vswr is 1.0. vswr and reflection coefficient are r elated as follows: vswr = (1 + )/(1 - ) most present instrumentation measures the reflection coefficient and calculates the vswr. figure 16 represents the direct r elationship between vswr and its equivalent in return loss (expressed in db). figure 16 vswr vs. return loss multiple reflections if there is a series of impedance changes, each one will have a reflection coefficient. the total reflection coefficient is the vector addition of each of the individual coefficients accounting for the distance between reflections and the r eflection of any reflected waves. even though the calcula- tions are difficult, a total vswr can still be measured. multiple reflections can produce a resonance phenomenon that is unique to wave theory. properly understood some serious difficulties can be avoided. an example will make the point clear. consider an electromagnetic wave with a 275 catalog 1307191 dimensions are in millimeters dimensions are shown for usa: 1-800-522-6752 south america: 55-11-2103-6000 revised 3-07 and inches unless otherwise reference purposes only. canada: 1-905-470-4425 hong kong: 852-2735-1628 specified. values in brackets specifications subject mexico: 01-800-733-8926 japan: 81-44-844-8013 www.tycoelectronics.com are standard equivalents. to change. c. america: 52-55-1106-0803 uk: 44-8706-080-208 rf coax connectors
276 catalog 1307191 dimensions are in millimeters dimensions are shown for usa: 1-800-522-6752 south america: 55-11-2103-6000 revised 3-07 and inches unless otherwise reference purposes only. canada: 1-905-470-4425 hong kong: 852-2735-1628 specified. values in brackets specifications subject mexico: 01-800-733-8926 japan: 81-44-844-8013 www.tycoelectronics.com are standard equivalents. to change. c. america: 52-55-1106-0803 uk: 44-8706-080-208 rf coax connectors appendix a - theory and application (continued) figure 17 multiple wave reflections (caused by impedance mismatch) / 4 / 4 25 ? 50 ? 50 ? .66v .33v .15v .44v .07v .22v v out v in 1 v out impedence mismatch v in = 1 volt v r =.48 volt v out = .52 volt in summary, avoid cable lengths, printed circuit board paths, or connectors that are multiple of one quarter ( / 4 , 3 / 4 , etc.) of the intended signal transmission wavelength. coaxial cables, when manufactured, also have periodic variations in diameter that result in periodic changes in impedance (zo), that can cause significant levels of r eflected signal (high return loss) at specific frequencies. reflections of digital signals the previous discussions dealing with attenuation, r eflections and standing waves can apply to digital signals with some extra thought. a single pulse can be thought of as a combination of high frequency sine waves. the maximum frequency component in a square wave pulse can be calculated by this equation: f = 0.35/rise time where f = ghz when ??is in nanoseconds attenuation of the frequencies necessary to support the short risetime will produce a slower rise and possibly prohibit the pulse from ever reaching the detector. this ?lurring?of the pulse is similar to the behavior of an rc circuit and the attenuation is sometimes called capacitive attenuation. a series of pulses can demonstrate resonance. if a portion of a pulse is reflected at each interface, it is possi- ble for them to come together and add up to form a new phantom pulse. the critical frequency here is the bit rate. think of a sine wave with a frequency the same as the bit rate; if it will r esonate in the cable, the pulses will also. extra pulses caused by resonance might easily result in an error signal from the receiving system requesting a retransmittal. the final result would be a communication system that is much slower than intended. cut-off frequency the cut-off frequency of a coaxial transmission line is the frequency at which modes of energy transmission, other than the ?em?mode, can be generated. 7.5 fco = ______ (in ghz) (d+d) (d and d are measured in inches) t ypes of transmission lines t win lead transmission cable is generally used where impedance matching alone is important, since it provides only minimal shielding. impedance values of 300 ohms and 600 ohms are common. lower impedance values r equire closer spacing of the conductors and are not nor- mally available in this type of cable. a typical application for twin lead cable is in antenna lead wire for television sets. twis ted pair is a variation of the twin lead type. it consists of two lengths of ordinary hookup wire twisted together. a twisted pair provides relatively constant impedance plus better magnetic shielding than twin lead cables. it is flexi- ble, inexpensive, easy to terminate and is used extensively by the computer industry. however, it should not be used when maximum shielding is required. wavelength of 4 inches traveling on a cable that changes from 50 ohms to 25 ohms. the reflection coefficient is -.33, which means that one third of the incident voltage is reflected toward the source. assume that one inch (one quarter wave- length) down the cable the impedance changes back to 50 ohm. again, one third of the wave is reflected, but without any phase shift. it travels back to the first interface where one third of this reflected wave is reflected back toward the sec- ond interface. two thirds of the wave is transmitted through the interface and travels back to the source. since the first (reflected) wave is shifted 180 degrees at the reflection, and the second (transmitted-reflected-transmitted) wave is shifted 180 degrees because it traveled the one inch separation twice, the two waves are in phase. the net result is that the vswr is much larger because the length of the 25 ohm sec- tion was just the right length to cause a resonance. if the length of the 25 ohm section had been one half wave- length, the two waves would have interfered and the vswr would be at a minimum. 7.5 (d+d) fco = (in ghz)
appendix a - theory and application (continued) shielded twisted pair cable is used to eliminate inductive and capacitive coupling. twisting cancels out inductive coupling, while the shield eliminates capacitive coupling. most applications for this cable are between equipment, racks and buildings. flexible (braided) coaxial cable is by far the most common type of closed transmission line because of its flexibility. it is a coaxial cable, meaning that both the signal and the ground conductors are on the same center axis. the outer conductor is made from fine braided wire, hence the name ?raided coaxial cable? this type of cable is used in practically all applications requiring complete shield- ing of the center conductor. the effectiveness of the shield- ing depends upon the weave of the braid and the number of braid layers. tyco electronics manufacturers connec- tors for cable sizes ranging from less than 1/8 in. diameter, for low power applications of around 50 watts, to over 1/2 in. diameter for power of 850 watts at 100 mhz and volt- ages up to 5000. in addition to power handling capabili- ties, cables are available for high frequency applications, high and low temperature applications, severe environ- mental applications and many other specialized uses. t riaxial cable is used when higher ?hielding?efficiency characteristics are required in applications similar to those using shielded twisted pair cable. figure 18 t win conductor and triaxial cable outer conductor outer conductor insulation insulation dielectric dielectric dielectric middle conductor signal conductors signal conductors often you will hear the term ?hielded cable? this is very similar to coaxial cable except the spacing between center conductor and shield is not carefully controlled during manufacture, resulting in non-constant impedance. semirigid coaxial cable uses a solid tubular outer conductor rather than the braided type, so that all the rf energy is contained within the cable. one of the draw- backs of braided cable is that the shielding is not 100% effective, especially at higher frequencies. this is because the braided construction can permit small amounts of short wavelength (high frequency) energy to radiate. normally this does not present a problem; however, if a higher degree of shielding is required, semirigid coaxial cable is r ecommended. for applications using frequencies higher than 30 ghz a miniature semirigid cable is recommended. v arious connectors are available from tyco electronics to terminate these cables. ribbon coaxial cable is a relatively recent tyco electronics innovation which combines the advantages of both ribbon cable and coaxial cable. tyco electronics currently pro- vides both the cable and the insulation displacing coaxial connector to terminate the cable. each individual coaxial cable consists of the signal conductor, dielectric, a foil shield and a drain wire which is in continuous contact with the foil. the entire assembly is then covered with an outer insulating jacket. the unique manufacturing feature of this cable is the precise placement of the drain wires to permit gang stripping of the outer jacket and foil. the major advantage of this cable is the speed and ease with which it can be mass terminated with the tyco electronics insulation displacement technique. they can also be separated into individual coaxial lines and terminated with standard coax- ial connectors as required. figure 19 shielding efficiencies 9 8 7 6 5 4 -1000 -200 -100 -80 -60 -40 -30 -20 -300 double braid single copper braid triax solid sheath .01 gh z .1 gh z 10 gh z 1 gh z -10 277 catalog 1307191 dimensions are in millimeters dimensions are shown for usa: 1-800-522-6752 south america: 55-11-2103-6000 revised 3-07 and inches unless otherwise reference purposes only. canada: 1-905-470-4425 hong kong: 852-2735-1628 specified. values in brackets specifications subject mexico: 01-800-733-8926 japan: 81-44-844-8013 www.tycoelectronics.com are standard equivalents. to change. c. america: 52-55-1106-0803 uk: 44-8706-080-208 rf coax connectors
278 catalog 1307191 dimensions are in millimeters dimensions are shown for usa: 1-800-522-6752 south america: 55-11-2103-6000 revised 3-07 and inches unless otherwise reference purposes only. canada: 1-905-470-4425 hong kong: 852-2735-1628 specified. values in brackets specifications subject mexico: 01-800-733-8926 japan: 81-44-844-8013 www.tycoelectronics.com are standard equivalents. to change. c. america: 52-55-1106-0803 uk: 44-8706-080-208 rf coax connectors appendix b - white bronze high quality surface plating & excellent intermodulation performance for rf connectors product facts low intermodulation high corrosion resistance low porosity low rf losses w ear and scratch resistance the tyco electronics white bronze surface finish repre- sents a dramatic improve- ment upon the wear characteristics and life expectancy of silver plating, at the same time offering a far better electrical perform- ance than nickel. white bronze plated connectors exhibit intermodulation characteristics significantly better than stainless steel or nickel plated products. silver has always been the preferred finish from an electrical standpoint but its corrosion and wear charac- teristics especially in harsh conditions are often unac- ceptable. while nickel is an extremely rugged finish it has properties undesirable in many rf applications; including, high rf and insertion losses, poor inter- modulation performance, high permeability and poor screening effectiveness. the tyco electronics white bronze is composed of copper, tin and zinc which are applied simultaneously to produce a finished color similar to stainless steel. with one of the most advanced industrial electro- plating facilities in the world t yco electronics can achieve the levels of control over the complex galvanic process necessary in the application of this alloy. the tyco electronics white bronze is similar in compo- sition and performance to other copper/tin/zinc alloys developed in the industry such as sucoplate and bbr. comprehensive condition- ing tests have been per- formed to provide a thorough evaluation of the t yco electronics white bronze plated connector bodies. the tests were per- formed to the specifications of the european and international rf connector standards ?cecc 22000/iec 68-2-14/ iec 169-1. the results are summarized on page 280. need more information? call technical support center at 1-800-522-6752 for product and tooling information. the technical support center is staffed with specialists well versed in all t yco electronics products. the center can provide you with: engineering support catalogs t echnical documents product samples t yco electronics authorized distributor locations t yco electronics internet home page: www.tycoelectronics.com t yco electronics industrial electroplating facilities is one of the most advanced in the world. deposit characteristics composition copper (55-60%), ti n (20-25%), zinc (15-20%) density 7.9-8.1 g/cm 3 hardness 300-380 hv passivation immersion chrome sucoplate is a plating trademark for huber & suhner. bbr is a plating trademark for radiall.
appendix b - white bronze (continued) low intermodulation products dissimilar metals, finishes and discontinuities within a coaxial line structure give rise to intermodulation products (imp). this is of particular concern in appli- cations requiring low levels of intermodulation, such as cellular base stations and antennas. white bronze plated connectors offer bet- ter imp performance and lifetime characteristics than nickel. due to the similarity of electrolytic potentials and the non magnetic proper- ties of the finish, levels of intermodulation are com- mensurate with silver and far in excess of stainless steel/nickel connectors. at the same time the excellent wear characteristics and durability of the finish ensure that the intermodula- tion life of the connector is greater than silver. the life is also improved as a direct r esult of the excellent corro- sion resistance properties of white bronze; thereby minimizing metal/metal oxide junctions. highly corrosion resistant even under continuous exposure to harsh environ- ments white bronze retains its aesthetic appearance. unlike silver it does not discolor when exposed to sulphur, potassium sul- phides etc., neither is there any build up in oxide layers as is the case with nickel. furthermore, white bronze parts have successfully passed all international salt spray tests (mil, bs, cecc, iec). in conditions of continu- ously high temperatures (>100?) and/or excessive humidity (>100%) there is no build up of foreign layers which may affect contact r esistance. low porosity and no reaction with contact surfaces less than 2? of white bronze is needed to create a completely nonporous, corrosion resistant surface. t yco electronics applies white bronze to a thickness of between 2? and 3?. this compares favorably with the typical plating thickness of nickel (>10?) and consequently, varia- tions in plating depth are significantly less. white bronze does not alloy with brass and since its coefficient of expansion is virtually identical to that of brass, rapid temperature shocks (-50?/200?) do not cause blistering or cracking of the plating. the electrolytic potential of white bronze is approxi- mately that of brass. consequently, any white bronze plated connectors in contact with stainless steel, silver, nickel or nickel containing finishes carry no risk of corrosion as a result of any chemical potential difference. low rf losses the relative permeability (?) of the tyco electronics white bronze is 1 giving rise to low rf losses even at high frequencies. as a direct result of the good conductivity of the finish, skin depth is minimized fur- ther reducing insertion loss and ensuring a better impedance match across the frequency range of the connectors. non magnetic finish the tyco electronics white bronze contains no ferrous materials and so has no magnetic properties. this is particularly desirable in many rf applications. w ear and scratch resistant the hardness of the t yco electronics white bronze at 300-380hv is more than double that of sil- ver and marginally harder than platings containing nickel. this gives a scratch r esistance which is rarely surpassed and makes it ideal for high mating applications. 279 catalog 1307191 dimensions are in millimeters dimensions are shown for usa: 1-800-522-6752 south america: 55-11-2103-6000 revised 3-07 and inches unless otherwise reference purposes only. canada: 1-905-470-4425 hong kong: 852-2735-1628 specified. values in brackets specifications subject mexico: 01-800-733-8926 japan: 81-44-844-8013 www.tycoelectronics.com are standard equivalents. to change. c. america: 52-55-1106-0803 uk: 44-8706-080-208 rf coax connectors
280 catalog 1307191 dimensions are in millimeters dimensions are shown for usa: 1-800-522-6752 south america: 55-11-2103-6000 revised 3-07 and inches unless otherwise reference purposes only. canada: 1-905-470-4425 hong kong: 852-2735-1628 specified. values in brackets specifications subject mexico: 01-800-733-8926 japan: 81-44-844-8013 www.tycoelectronics.com are standard equivalents. to change. c. america: 52-55-1106-0803 uk: 44-8706-080-208 rf coax connectors appendix b - white bronze (continued) white bronze is available on all products, including 7-16, n, tnc, osp and sma. low coefficient of friction the coefficient of friction is approximately 70% that of silver to give lower insertion forces and smoother coupling. these properties combine to produce a harder wearing, longer last- ing finish which prolongs connector life and reduces the ongoing cost of ownership. t yco electronics?white bronze environmental test four groups of conditioning tests were performed to pro- vide a comprehensive evalu- ation of the tyco electronics white bronze plated con- nector bodies. the tests were performed to the spec- ifications of the european and international rf con- nector standards - cecc 22000/ iec 68-2-14/iec 169- 1. full details and relevant data are available from t yco electronics and results are summarized below. t est 1 - industrial atmosphere & temperature endurance 1.1 industrial atmosphere exposure to sulphur dioxide atmosphere (as specified in iec 68-2-42 test kc) for 21 days of mated connectors, previously subjected to 500 matings, to determine the influence of sulphur dioxide on the corrosion resistance properties of white bronze plating. contact resistance measured after matings and sulphur dioxide expo- sure was less than 5% (0.23mohm) of the permissi- ble specification. 1.2 high temperature endurance exposure to temperatures of 85? ?? for 250 hours, to determine the impact of prolonged high temperatures on plating adhesion. prior to testing the connectors were subject to 500 matings. results showed no visual deteriora- tion in plating finish (blister- ing, cracking etc.) and the r esults of outer conductivity performance were compara- ble to test 1 (above). t est 2 - rapid temperature change & damp heat steady state 2.1 rapid temperature change exposure to -55? and +85? for 15 minutes, transition time 2-3 minutes, 50 cycles. to determine possible plating deteriora- tion caused by prolonged and rapid temperature change. no visual deterio- ration, outer conductivity performance were compa- rable with test 1 (above). 2.2 damp heat steady state exposure to 93% rel- ative humidity (at 40?) for 10 days. to determine plat- ing adhesion. no visual deterioration, outer conduc- tivity performance were comparable with test 1 (above). t est 3 - soldering heat 3.1 resistance to soldering heat exposure to concen- trated soldering heat (250?) for 10 seconds to evaluate any possible dete- rioration in plating finish. no deterioration detected. t est 4 - salt mist & mechanical endurance 4.1 salt mist exposure to salt mist spray (as defined in bs 2011 pt. 2.1 ka) for 48 hours to eval- uate the uniformity of pro- tective coatings, any visual deterioration, or impact on electrical performance. no visual deterioration, outer conductivity performance were comparable with test 1 (above). 4.2 mechanical endurance electrical and visual evalua- tion of the connectors after 500 matings to determine any electrical or visual deterioration. no visual deterioration, outer conduc- tivity performance were comparable with test 1 (above). a vailability and ordering t yco electronics offers white bronze on all prod- ucts including 7-16, n, tnc, sma and osp. for more information on white bronze contact your local tyco electronics sales office.
appendix c - intermodulation in rf coaxial connectors product facts high quality plating to 6? for im-sensitive products restrict materials to copper and its alloys a void the use of stainless steel, nickel, ferrites, etc. in the signal path quality machining ensure, by design, a prop- erly defined contact inter- face at connector, panel and contact interfaces a voidance of crimps the increased demand from the mobile communication industry to provide greater channel capacity coupled with the increased sensitivity of receivers has exposed a condi- tion within rf coaxial connectors referred to as intermodulation distortion (imd). this condition occurs when non-linearities within the connectors act as imperfect diodes to generate other frequencies known as intermodulation products (imp). some of these frequencies appear within the receive band and effectively block the channel. the purpose of this application note is to outline the basic causes of intermodulation and the techniques tyco electronics has undertaken to minimize this condition. im basics modern developments in base stations for gsm, dcs 1800 and pcs 1900 have necessitated the use of ?-16? ?.1/9.5 and ??connectors due to the increased power requirements. the requirements for performance are typically in the order of - 160 dbc to -163dbc (when working in dbc) or -120dbm (when working in dbm), both with 2 x (+43dbm) tones. the requirement is so stringent because the connectors are used in post-filtering sections of the transmit path (between the diplexer and the antenna) and also because the system is a full duplex system where the multiple-carrier transmit path is also the receive path. in a truly linear system, the output is directly proportional to the input, following the form of y=mx+c (see fig. 2). coaxial connectors have traditionally been viewed as following this pattern. in reality, there have always been non-linearities present in coaxial con- nectors. these were not readily apparent as the resultant im products were significantly below the noise floor of the system due to re latively weak carrier signals. this situation becomes apparent when the incident power is raised above 30 dbm. the small non-linearities have a character- istic similar to a square-law (see fig 3). the distortion to the waveform is evident, the linear vs. non-linear response 12 10 8 6 4 2 0 120 100 80 60 20 0 non-linear linear fig. 2 fig. 3 40 need more information? call technical support at the numbers listed below. t echnical support is staffed with specialists well versed in all tyco electronics products. they can provide you with: t echnical support catalogs t echnical documents product samples t yco electronics authorized distributor locations 281 catalog 1307191 dimensions are in millimeters dimensions are shown for usa: 1-800-522-6752 south america: 55-11-2103-6000 revised 3-07 and inches unless otherwise reference purposes only. canada: 1-905-470-4425 hong kong: 852-2735-1628 specified. values in brackets specifications subject mexico: 01-800-733-8926 japan: 81-44-844-8013 www.tycoelectronics.com are standard equivalents. to change. c. america: 52-55-1106-0803 uk: 44-8706-080-208 rf coax connectors
282 catalog 1307191 dimensions are in millimeters dimensions are shown for usa: 1-800-522-6752 south america: 55-11-2103-6000 revised 3-07 and inches unless otherwise reference purposes only. canada: 1-905-470-4425 hong kong: 852-2735-1628 specified. values in brackets specifications subject mexico: 01-800-733-8926 japan: 81-44-844-8013 www.tycoelectronics.com are standard equivalents. to change. c. america: 52-55-1106-0803 uk: 44-8706-080-208 rf coax connectors appendix c - intermodulation in rf coaxial connectors (continued) spectrum of products in a 2-tone system frequency (mhz) fig. 4 rx band tx band 3f1-2f2 f1 f1 4f1-3f2 2f1-f2 2f2-f1 3f2-2f1 4f2-3f1 carriers % 120 100 80 60 40 20 0 potential causes of im in coaxial connectors there are numerous factors which can affect intermodula- tion performance in rf coaxial connectors. identified below are the most likely sources of concern: contaminated plating solution insufficient plating thickness corrosion dissimilar metals in intimate contact magnetic materials in the signal path low contact pressure less than 360-degree contact poor surface finish debris and dust within the connector convoluted signal path remedies for im in rf coaxial connectors to combat the above identified im sources, tyco electronics undertakes precautions during the design and manufacture of the product, as summarized below: high quality plating to 6? for im-sensitive products the plating must also be free from contaminants and properly passivated with a chromate passivate. silver has been the preferred plating material as it possesses the lowest practical r esistivity thereby minimizing interface contact resistances. t yco electronics also offers a unique white bronze plating finish which provides excellent durability, tarnish resistance and non-magnetic properties ideal for low intermodulation. during testing with a system noise floor of -145 dbm, the differ- ence in performance between the tyco electronics silver-plat- ing and the tyco electronics white bronze finish is not discernible (refer to white bronze application note 1307057). restrict materials to copper and its alloys. this ensures maximum plating adhesion and minimum electro- chemical potential difference between the base materials and their over-platings. a void the use of stainless steel, nickel, ferrites, etc. in the signal path magnetic and para-magnetic materials will only compound non-linearites and give poorer interface contact resistances. during experimentation, tyco electronics discovered a degra- dation in performance of 20db when nickel plate was used. the presence of magnetic or para-magnetic materials will also cause the forward imp figure to differ from the reverse imp. quality machining surface finish is paramount. the signal propagates within a ?kin?if this skin is too rough, the signal will repeatedly transition through metal and surface oxide layers, thereby creating the same effect as a poor panel contact (see fig. 5). for im-sensitive designs tyco electronics ensures 0.4? is the maximum. contact design this primarily affects the connector interface. repeated matings can generate small amounts of plating from the indi- vidual parts. these oxidize and interfere with the mechanical (and therefore electrical) mating of connectors. the oxidized debris gives further rise to metal and surface oxide junctions and consequently, higher im products. ensure, by design, a properly defined contact interface at connector, panel and contact interfaces insufficient contact force will give rise to metal to oxide junc- tions. the classic rectifiers were metal oxide by composition. axial maximum material condition at the connector interface is critical in order to ensure minimum mismatch and maximum effect of surface roughness fig. 5 1.5 0.5 0 -0.5 -1.5 -1 1 oxide signal flow metal air positive 1/2 cycle being significantly greater in amplitude than the negative 1/2-cycle. when converted to the fre- quency domain, this waveform consists of the desired fun- damental plus a decaying series of related harmonics that, in themselves, interact with other carriers present on the transmission line. the effect of this interaction produces additional frequen- cies, some of which occur where they are least wanted (see fig. 4). the 2f1-f2 (3rd order imp), 3f1-2f2 (5th order imp) and 4f1-3f2 (7th order imp) products can all mani- fest in the receive band and, if sufficiently large, effectively block a channel by making the base station receiver think that a carrier is present when one is not. im basics (continued)
appendix c - intermodulation in rf coaxial connectors (continued) potential of a butt-contact. panel interfaces generally concern the physical contact of the connector body to the panel. in this case, it has been determined that a protruding feature as close as possible to the body bore will give the best im performance. the applied mounting force is concentrated in the surface area of the protrusion which, on engagement with the panel, punctures the existing oxide layer to give a metal-to-metal, gas-tight junction. a voidance of crimps crimps, by nature, can only give multiple point-contact rather than 360-degree contact and also cause a variability in the position of electrical contact during dynamic testing. im prod- ucts will therefore be greater. it has been found that soldered center contacts and clamp/solder outer contacts give the best static and dynamic im performance. improving im connector design t yco electronics continues to pursue design techniques which improve intermodulation performance to address emerging telecommunication market needs. a state of the art intermodu- lation test facility and participation on the international (iec sc46d wg5) committee to develop standard test practices ensures our commitment to the understanding of intermodula- tion characteristics. this applied technology base is instrumen- tal in developing innovative low intermodulation products for 7-16, type n, sma and osp interfaces. most commonly asked questions regarding intermodulation why is intermodulation such a concern for cellular infrastructure equipment? the primary concerns for cellular service providers today are channel efficiency and clarity of transmission. growth in demand for mobile communications has created a need to operate equipment at greater capacities and reliability to service the competitive market. intermodulation degrades or limits the ability of the service provider to operate at optimal levels of performance and may ultimately cause subscribers to experience poor call quality. intermodulation has become an important factor in system selection to ensure the best possible network service. where is intermodulation most likely to occur in cellular infrastructure equipment? intermodulation is typically of greatest concern between the filtering elements of the system and the antenna. the introduc- tion of higher power levels for the transmit side of the equip- ment cr eates greater potential for intermodulation to occur. this is why the majority of focus for intermodulation concerns 7-16, type n, sma and 4.1/9.5 connector interfaces. is intermodulation a recent development? intermodulation has always been inherently present in rf coax- ial connectors but may be relatively imperceptible in some devices for a variety of reasons. the amount of power applied to an rf connector determines the relative im threshold which can be observed. intermodulation is therefore more likely to cause concern in a higher power system, for example, utilizing a 7-16 connector interface rather than an equivalent low power osx solution. the trend toward higher power digital cellular systems creates the need for greater intermodulation sensitivity. what is the best method of cable attachment for im sensi- tive cable assembly applications? soldering and clamping are preferred methods due to the 360-degree point of contact created at the cable to connector interface. such intimate contact improves the overall contact r esistance leading to improved im characteristics. in addition, it is also better to solder the center conductor of the connector to the cable versus crimping due to the improved contact r esistance path and elimination of voids. are there ways to test for intermodulation in an rf coaxial connector? y es, very sophisticated methods are needed to test for inter- modulation in rf connectors. the test system must utilize extremely sensitive filtering or clean amplification so that the equipment itself has a very low intermodulation noise floor. there is not yet a standardized approach to testing, although an international committee has been formed in the connector industry to address the situation. tyco electronics has a state of the art test facility where our designs are optimized for low intermod performance and where further analysis on the effects of this phenomena can be studied. is intermodulation in coaxial connectors frequency dependent? no. because coaxial connectors are broadband devices there is no frequency dependency. some apparent variability can be detected during testing but this is not due to the connector. the impedance matches of the output diplexer/triplexer and terminations are the causes of the variations and should not be incorrectly attributed to the connector/assembly. t yco electronics interconnect business unit has demonstrated that by varying the impedance match of the test station termi- nation, a dut can show 15db better imp 3 than exists in reality. imp 3 in mixers follows a 3db/db relationship. what is it for connectors? the relationship is identical. taking the 3rd order (2f1-f2): varying the power of f2 gives an imp 3 r elationship of 1db/db whereas varying the power of f1 gives a relationship of 2db/db as the imp is derived from the 2nd harmonic of f1. this gives a total of 3db/db when symmetrically varying both carrier powers. i am buying a complete cable assembly from t yco electronics. how do i interpret the imp result now? with caution! it is the tyco electronics policy when testing devices to move away from the normal static test to a dynamic test where the cable termination interfaces are mechanically exercised during live im conditions. it is also a good indicator to customers of the build quality of the assemblies. a dynamic evaluation has shown 15db degradation in imp performance for poor assemblies and even as much as 50db for bad ones.it is therefore strongly advisable that im performance fig- ures are stated in the context of a dynamic measurement. 1. 2. 3. 4. 5. 6. 7. 8. remedies for im in rf coaxial connectors (continued) 283 catalog 1307191 dimensions are in millimeters dimensions are shown for usa: 1-800-522-6752 south america: 55-11-2103-6000 revised 3-07 and inches unless otherwise reference purposes only. canada: 1-905-470-4425 hong kong: 852-2735-1628 specified. values in brackets specifications subject mexico: 01-800-733-8926 japan: 81-44-844-8013 www.tycoelectronics.com are standard equivalents. to change. c. america: 52-55-1106-0803 uk: 44-8706-080-208 rf coax connectors
284 catalog 1307191 dimensions are in millimeters dimensions are shown for usa: 1-800-522-6752 south america: 55-11-2103-6000 revised 3-07 and inches unless otherwise reference purposes only. canada: 1-905-470-4425 hong kong: 852-2735-1628 specified. values in brackets specifications subject mexico: 01-800-733-8926 japan: 81-44-844-8013 www.tycoelectronics.com are standard equivalents. to change. c. america: 52-55-1106-0803 uk: 44-8706-080-208 rf coax connectors appendix d - typical coaxial cable specifications abbreviations dielectric pe .................solid polyethylene ptee .............solid polyetrafluoroethylene pib ................polyisobulylene, type b, per mil-c-17 rubber ..........per mil-c-17d sil .................silicone rubber ps .................polystyrene conductors and braid materials al .................aluminum scaai ...........silver covered copper covered aluminum bc.................bare copper sc.................silver covered copper ccs ..............copper covered steel tc .................tinned copper sccs ............silver covered copper covered steel sccad br......silver covered cadmium bronze gs.................galvanized steel tccs ............tin copper covered steel ssc ..............silver covered strip hr.................high resistance wire sa .................silver covered alloy jacket material pvc-i ............black polyvinylchloride, contaminating, type i, per mil-c-17d pvc-ii ...........gray polyvinylchloride, noncontaminating, type ii, per mil-c-17d pvc-iia.........black polyvinylchloride, noncontaminating, type iia, per mil-c-17d pe-iii.............clear polyethylene pe-iiia ..........high molecular weight, black polyethylene, type iiia, per mil-c-17d fg braid v ....fiberglass, impregnated, type v, per mil-c-17d fep-ix ..........fluorinated ethylene propylene, type ix, per mil-c-17d pur ..............polyurathane, black specific compounds sil/dac-vi...dacron braid over silicone rubber, type vi, per mil-c-17d rubber ..........per mil-c-17d max. rg/u inner dielectric number/type jacket weight nom. nom. max. operating t ype conductor material dod of shielding material o.d. (lb/ft) imped. cap operating v oltage comments cable braids (ohms) pf/ft temp. (c? (volts rms) 0.81 bc .295 5.74 4 .0320 pe .116 2/bc pvc-1 .226 .025 50 30.8 40 80 1900 use rg 58c 1.29 bc 4.7 8.43 use up to 5 .0508 pe .185 2/bc pvc-1 .332 .088 52.5 28.5 40 80 3000 100 mhz 1.29 sc 4.6 8.33 5a .0508 pe .181 2/sc pvc-ii .328 .088 50 30.8 40 80 3000 use rg 212 1.29 sc 4.6 8.33 5b .0508 pe .181 2/sc pvc-iia .328 .087 50 30.8 40 80 3000 use rg 212 0.72 ccs 4.7 2/inner sc 8.43 6 .0285 pe .185 outer bc pvc-ii .332 .081 76 20.0 40 80 2700 use rg 6a 0.72 ccs 4.7 2/inner sc 8.43 good attenuation 6a .0285 pe .185 outer bc pvc-iia .332 .082 75 20.6 40 80 2700 stability 0.91 bc air-space 6.35 9.4 7 .0359 pe .250 1/bc pvc-i .370 .080 95 12.5 40 80 1000 use rg 63b 2.17 .0855 7.24 10.29 8 7/ 0.72 bc pe .285 1/bc pvc-i .405 .106 52 29.5 40 80 4000 use rg 213 .0285 2.17 .0855 7.24 10.29 8a 7/ 0.72 bc pe .285 1/bc pvc-iia .405 .106 52 29.5 40 80 5000 use rg 213 .0285 2.17 .0855 7.11 2/inner sc 10.67 9 7/ 0.72 sc pe .280 outer bc pvc-ii .420 .140 51 30.0 40 80 4000 use rg 214 .0285 2.17 .0855 7.11 10.67 9a 7/ 0.72 sc pe .280 2/sc pvc-ii .420 .140 51 30.0 40 80 4000 use rg 214 .0285 2.17 .0855 7.11 10.67 9b 7/ 0.72 sc pe .280 2/sc pvc-iia .420 .150 50 30.8 40 80 5000 uase rg 214 .0285 2.17 .0855 7.24 pvc-ii 11.76 10 7/ 0.72 bc pe .285 1/bc w/armor .463 .146 52 29.5 40 80 4000 use rg 215 .0285 2.17 .0855 7.24 pbc-iia 11.76 10a 7/ 0.72 bc pe .285 1/bc w/armor .463 .146 52 29.5 40 80 5000 use rg 215 .0285 1.21 .0477 7.24 10.29 use up to 11 7/ 0.4 tc pe .285 1/bc pvc-i .405 .096 75 20.6 40 80 4000 100 mhz .0159 1.21 .0477 7.24 10.29 use up to 11a 7/ 0.4 tc pe .285 1/bc pvc-iia .405 .096 75 20.6 40 80 5000 1000 mhz .0159 1.21 .0477 7.24 pvc-ii 11.76 12 7/ 0.4 tc pe .285 1/bc w/armor .463 .141 75 20.6 40 80 4000 use rg 12a .0159
appendix d - typical coaxial cable specifications (continued) max. rg/u inner dielectric number/type jacket weight nom. nom. max. operating t ype conductor material dod of shielding material o.d. (lb/ft) imped. cap operating v oltage comments cable braids (ohms) pf/ft temp. (c? (volts rms) 1.21 .0477 7.24 pvc-iia 11.76 use up to 12a 7/ 0.4 tc pe .285 1/bc w/armor .463 .141 75 20.6 40 80 5000 1000 mhz .0159 1.21 .0477 7.11 10.67 13 7/ 0.4 tc pe .280 2/bc pvc-i .420 .126 74 20.8 40 80 4000 use rg 216 .0159 1.21 .0477 7.11 10.67 13a 7/ 0.4 tc pe .280 2/bc pvc-iia .420 .126 52 20.8 40 80 4000 use rg 216 .0159 2.59 bc 9.4 13.84 14 .1020 pe .370 2/bc pvc-ii .545 .216 52 29.5 40 80 5500 use rg 217 2.59 bc 9.4 13.84 14a .1020 pe .370 2/bc pvc-iia .545 .216 76 29.5 40 80 7000 use rg 217 1.45 ccs 9.4 13.84 use up to 15 .0571 pe .370 2/bc pvc-i .545 .197 52 20.0 40 80 5000 1000 mhz 2.59 bc 16 .1250 pe 11.68 1/bc pvc-i 16 .254 52 29.5 40 80 6000 use up to t ube .460 .630 1000 mhz 4.78 bc 17.27 22.1 use up to 17 .1880 pe .680 1/bc pvc-ii .870 .460 52 29.5 40 80 11,000 1000 mhz 4.78 bc 17.27 22.1 17a .1880 pe .680 1/bc pvc-iia .870 .460 52 29.5 40 80 11,000 use rg 218 17b cancelled, reassigned new nomenclature, rg 177 4.78 bc 17.27 pvc-ii 23.50 18 .1880 pe .680 1/bc w/armor .925 .585 52 29.5 40 80 11,000 use rg 219 4.78 bc 17.27 pvc-iia 23.57 18a .1880 pe .680 1/bc w/armor .928 .585 52 29.5 40 80 11,000 use rg 219 6.35 bc 23.11 28.45 19 .2500 pe .910 1/bc pvc-ii 1.120 .740 52 29.5 40 80 14,000 use rg 220 6.35 bc 23.11 28.45 19a .2500 pe .910 1/bc pvc-iia 1.120 .740 52 29.5 40 80 14,000 use rg 220 6.35 bc 23.11 pvc-ii 29.92 20 .2500 pe .910 1/bc w/armor 1.178 .925 52 29.5 40 80 14,000 use rg 221 6.35 bc 23.11 pvc-iia 29.92 20a .2500 pe .910 1/bc w/armor 1.178 .925 53 29.5 40 80 14,000 use rg 221 1.29 21 0508 pe 4.7 2/sc pvc-ii 8.43 .087 53 29.0 40 80 2700 use rg 222 high res. wire .185 .332 1.29 21a .0508 pe 4.7 2/sc pvc-iia 8.43 .087 95 29.0 40 80 2700 use rg 222 high res. wire .185 .332 2 cond. 1.16 .0456 7.24 10.29 balanced line 22 7/ 0.39 bc pe .285 1/tc pvc-i .405 .105 95 16.0 40 80 1000 w/twisted cond. .0152 2 cond. 1.16 .0456 7.24 10.67 balanced line 22a 7/ 0.39 bc pe .285 2/tc pvc-ii .420 .151 95 16.0 40 80 1000 w/twisted cond. .0152 2 cond. 1.16 .0456 7.24 10.67 balanced line 22b 7/ .0.39 bc pe .285 2/tc pvc-iia .420 .151 125 16.0 40 80 1000 w/twisted cond. .0152 2 cond. 2.17 2/inidividual 16.51 x .490 .0855 9.65 inner .650 23 7/ 0.72 bc pe,2 cores .380 common pvc-i 24 .490 125 12.0 40 80 3000 use rg 23a .0285 outer bc .945 2 cond. 2.17 2/individual 16.51 x .490 .0855 9.65 inner .650 dual coaxial 23a 7/ 0.72 bc pe,2 cores .380 common pvc-iia 24 .490 125 12.0 40 80 3000 balanced line .0285 outer bc .945 2 cond. 2.17 2/individual 25.48 .0855 9.65 inner pvc-i 1.003 2/individual 24 7/ 0.72 bc pe,2 cores .380 common w/armor 19.81 .670 .670 12.0 40 80 3000 use rg 24a .0285 outer bc .780 285 catalog 1307191 dimensions are in millimeters dimensions are shown for usa: 1-800-522-6752 south america: 55-11-2103-6000 revised 3-07 and inches unless otherwise reference purposes only. canada: 1-905-470-4425 hong kong: 852-2735-1628 specified. values in brackets specifications subject mexico: 01-800-733-8926 japan: 81-44-844-8013 www.tycoelectronics.com are standard equivalents. to change. c. america: 52-55-1106-0803 uk: 44-8706-080-208 rf coax connectors
286 catalog 1307191 dimensions are in millimeters dimensions are shown for usa: 1-800-522-6752 south america: 55-11-2103-6000 revised 3-07 and inches unless otherwise reference purposes only. canada: 1-905-470-4425 hong kong: 852-2735-1628 specified. values in brackets specifications subject mexico: 01-800-733-8926 japan: 81-44-844-8013 www.tycoelectronics.com are standard equivalents. to change. c. america: 52-55-1106-0803 uk: 44-8706-080-208 rf coax connectors appendix d - typical coaxial cable specifications (continued) max. rg/u inner dielectric number/type jacket weight nom. nom. max. operating t ype conductor material dod of shielding material o.d. (lb/ft) imped. cap operating v oltage comments cable braids (ohms) pf/ft temp. (c? (volts rms) 2 cond. 2.17 2/individual 25.48 .0855 9.65 inner pvc-iia 1.003 24a 7/ 0.72 bc pe,2 cores .380 common w/armor 19.81 .670 125 12.0 40 80 3000 use rg 23a .0285 outer bc .780 1.49 .0585 7.32 12.83 25a 19/ 0.3 tc rubber-e .288 2/tc rubber-iv .505 .205 48 50.0 40 80 10,000 .0117 1.49 .0585 7.32 rubber-iv 12.27 26a 19/ 0.3 tc rubber-e .288 1/tc w/armor .483 .189 48 50.0 40 80 10,000 .0117 2.35 .0925 11.56 rubber-iv 16.59 27a 19/ 0.47 tc rubber-d .455 1/tc w/armor .653 .304 48 50.0 40 80 15,000 .0185 2.35 .0925 11.56 rubber-iv 19.05 28b 19/ 0.47 tc rubber-d .455 2/tc, gs w/armor .750 .370 48 50.0 40 80 15,000 .0185 0.81 bc .0320 2.95 4.67 29 1.21 pe .116 1/tc pe-111 .184 0.21 53.5 28.5 55 80 1900 use rg 58 .0477 7/ 0.4 bc 4.7 6.35 30 .0159 pib .185 1/bc pvc-i .250 .044 50 27.0 40 80 1500 use rg 58 2.17 .0855 7.24 10.29 31 7/ 0.72 bc pib .285 1/bc pvc-i .405 .106 51 31.0 40 80 2000 use rg 213 .0285 2.17 .0855 7.24 pvc-i 11.81 32 7/ 0.72 bc pib .285 1/bc w/armor .465 .141 51 29.0 40 80 2000 use rg 215 .0285 2.59 bc 9.4 11.94 33 .1019 pe 3.70 none lead .470 .390 51 30.0 55 80 6000 2.17 .0855 11.56 15.88 34 7/ 0.72 bc pe .455 1/bc pvc-i .625 .224 71 21.5 40 80 5200 use rg 31b .0285 1.9 .0747 11.68 16 34a 7/ 0.63 bc pe .460 1/bc pvc-iia .630 .224 75 20.6 40 80 6500 use rg 34b .0249 1.9 34b .0747 pe 11.68 1/bc pvc-iia 16 .224 75 20.6 40 80 6500 use up to 7/ 0.63 bc .460 .630 1000 mhz .0249 2.91 bc 35 .1144 pe 11.68 1/bc pvc-ii 23.57 .525 71 21.5 40 80 10,000 1.6 .460 w/armor .928 use rg 35b 0.63 2.65 bc 11.68 pvc-iia 23.57 35a .1045 pe .460 1/bc w/armor .928 .525 75 20.6 40 80 10,000 use rg 35b 2.65 bc 11.68 23.57 unarmored: 35b .1045 pe .460 1/bc pvc-iia .928 .525 75 20.6 40 80 10,000 see rg 164 4.11 bc 23.11 29.97 use up to 36 .1620 pe .910 1/bc pvc-i 1.180 .805 69 22.0 40 80 13,000 1000 mhz 0.81 tc 3.56 5.33 37 .0320 rubber-c .140 1/tc pe-iii .210 .040 52.5 38.0 55 80 750 1.15 tc 4.98 7.92 38 .0453 rubber-c .196 2/tc pe-iii .312 .110 52.5 38.0 55 80 1000 0.64 ccs 4.98 7.92 39 .0253 rubber-c .196 2/tc pe-iii .312 .100 72.5 28.6 55 80 1000 0.64 ccs 4.98 10.67 40 .0253 rubber-c .196 2/tc rubber iv .420 .150 72.5 28.0 40 80 1000 1.24 .0490 6.35 10.8 41 16/ 0.25 tc rubber-iv .250 1/tc rubber-iv .425 .150 67.5 27.6 40 80 3000 .0100 0.72 42 .0285 pe 4.98 2/sc pvc-ii 8.69 .050 78 20.0 40 80 2700 use rg 222 res. wire .196 .342
appendix d - typical coaxial cable specifications (continued) max. rg/u inner dielectric number/type jacket weight nom. nom. max. operating t ype conductor material dod of shielding material o.d. (lb/ft) imped. cap operating v oltage comments cable braids (ohms) pf/ft temp. (c? (volts rms) 2 cond. 2.17 .0855 11.99 15.67 43 7/ 0.72 bc rubber-b .427 1/bc pvc-i .617 ? 5 17.6 40 80 1500 use rg 57 .0285 1.21 .0477 4.7 6.99 54 7/ 0.4 bc pe .185 1/bc pvc-i .275 .045 58 27.0 40 80 2500 use rg 54a .0159 1.16 .0456 4.52 6.22 use up to 54a 7/ 0.39 bc pe .178 1/tc pe-iii 2.45 .041 58 26.5 55 80 3000 1000 mhz .0152 0.81 bc 2.95 5.08 55 .0320 pe .116 2/tc pe-iii .200 .032 53.5 28.5 55 80 1900 use rg 55b .0.89 sc 2.95 5.08 55a .0350 pe .116 2/sc pvc-iia .200 .034 50 30.8 40 80 1900 use rg 223 0.81 sc 2.95 5.08 use up to 55b .0320 pe .116 2/tc pe-iiia .200 .033 53.5 28.5 55 80 1900 1000 mhz 1.49 .0585 7.82 13.59 56 19/ 0.3 bc rubber-d .308 2/bc pvc-i .535 .243 48 50.0 40 80 8000 .0117 2 cond. 2.17 .0855 11.99 15.88 balanced line 57 7/ 0.72 bc pe .472 1/tc pvc-i .625 .225 95 17.0 40 80 3000 parallel .0285 2 cond. 2.17 .0855 11.99 15.88 balanced line 57a 7/ 0.72 bc pe .472 1/tc pvc-iia .625 .225 95 17.0 40 80 3000 parallel .0285 0.81 bc 2.95 4.95 58 .0320 pe .116 1/tc pvc-i .195 .029 53.5 28.5 40 80 1900 use rg 58b 0.9 2.95 4.95 58a .0355 pe .116 1/tc pvc-i .195 .029 52 28.5 40 80 1900 use rg 58c 0.81 bc 2.95 4.95 use up to 58b .0320 pe .116 1/tc pvc-iia .195 .029 53.5 28.5 40 80 1900 1000 mhz 0.9 .0355 2.95 4.95 extra flexible 58c 19/ 0.8 tc pe .116 1/tc pvc-iia .195 .029 50 30.8 40 80 1900 v ersion rg 58b .0071 0.64 ccs 3.71 6.15 59 .0253 pe .146 1/bc pvc-i .242 .032 73 21.0 40 80 2300 use rg 59b 0.64 ccs 3.71 6.15 59a .0253 pe .146 1/bc pvc-iia .242 .032 73 21.0 40 80 2300 use rg 59b 0.58 ccs 3.71 6.15 use up to 59b .0230 pe .146 1/bc pvc-iia .242 .032 75 20.6 40 80 2300 1000 mhz 1.29 str. c 6.35 10.8 60 .0508 rubber-c .250 1/bc rubber-iv .425 .150 50 39.0 40 80 1100 0.64 ccs air-space 3.71 6.15 use rg 62a 62 .0253 pe .146 1/bc pvc-i .242 .038 93 13.5 40 80 750 low 0.64 ccs air-space 3.71 6.15 62a .0253 pe .146 1/bc pvc-iia .242 .038 93 13.5 40 80 750 capacitance 0.61 .0240 air-space 3.71 6.15 extra flexible 62b 7/ 0.2 ccs pe .146 1/bc pvc-iia .242 .038 93 13.5 40 80 750 rg 62a .0080 0.64 ccs air-space 7.24 10.29 63 .0253 pe .285 1/bc pvc-i .405 .083 125 10.0 40 80 1000 use rg 63b 0.64 bc air-space 7.24 10.29 63a .0253 pe .285 1/bc pvc-i .405 .083 125 10.0 40 80 1000 use rg 63b 0.64 ccs air-space 7.24 10.29 low 63b .0253 pe .285 1/bc pvc-iia .405 .083 125 10.0 40 80 1000 capacitance 1.49 7.82 12.57 .0585 .308 .495 64 19/ 0.3 tc rubber-d 7.24 2/tc rubber-iv 10.29 .225 48 60.0 40 80 10,000 capacitance .0117 .285 . 405 1.49 .0585 7.32 11.68 64a 19/ 0.3 tc rubber-e .288 2/tc rubber-iv .460 .205 48 50.0 40 80 10,000 .0117 0.2 [.0080] formex-f 7.24 10.29 high impedance 65 3.25 [.1280] pe .285 1/bc pvc-i .405 .096 950 44.0 40 80 1000 video delay line dia. helix 287 catalog 1307191 dimensions are in millimeters dimensions are shown for usa: 1-800-522-6752 south america: 55-11-2103-6000 revised 3-07 and inches unless otherwise reference purposes only. canada: 1-905-470-4425 hong kong: 852-2735-1628 specified. values in brackets specifications subject mexico: 01-800-733-8926 japan: 81-44-844-8013 www.tycoelectronics.com are standard equivalents. to change. c. america: 52-55-1106-0803 uk: 44-8706-080-208 rf coax connectors
288 catalog 1307191 dimensions are in millimeters dimensions are shown for usa: 1-800-522-6752 south america: 55-11-2103-6000 revised 3-07 and inches unless otherwise reference purposes only. canada: 1-905-470-4425 hong kong: 852-2735-1628 specified. values in brackets specifications subject mexico: 01-800-733-8926 japan: 81-44-844-8013 www.tycoelectronics.com are standard equivalents. to change. c. america: 52-55-1106-0803 uk: 44-8706-080-208 rf coax connectors appendix d - typical coaxial cable specifications (continued) max. rg/u inner dielectric number/type jacket weight nom. nom. max. operating t ype conductor material dod of shielding material o.d. (lb/ft) imped. cap operating v oltage comments cable braids (ohms) pf/ft temp. (c? (volts rms) .02 [.0080] formex-f 7.24 10.29 high impedance 65a 3.25 [.1280] pe .285 1/bc pvc-iia .405 .096 950 44.0 40 80 1000 video delay line dia. helix 0.64 ccs air-space 3.71 6.22 71 .0253 pe .146 2/tc pvc-i .245 .046 93 13.5 40 80 750 use rg 71b 0.64 ccs air-space 3.71 6.22 71a .0253 pe .146 2/tc pe-iii .245 .046 93 13.5 55 80 750 use rg 71b 0.64 ccs air-space 3.71 6.22 low 71b .0253 pe .146 2/tc pe-iiia .245 .046 93 13.5 55 80 750 capacitance 0.64 ccs air-space 11.68 16 low 72 .0253 pe .460 1/bc pvc-i .630 .169 150 7.8 40 80 750 capacitance 1.65 bc 2.95 copper 4.45 low 73 .0650 pe .116 2/bc braid .175 .031 25 61.8 55 80 1000 impedance 2.59 bc 9.4 pvc-ii 15.32 74 .1020 pe .370 2/bc w/armor .603 .310 52 29.5 40 80 5500 use rg 224 2.59 bc 9.4 pvc-iia 15.32 74a .1020 pe .370 2/bc w/armor .603 .310 52 29.5 40 80 5500 use rg 224 1.49 .0585 7.32 11.43 8000 77a 19/ 0.3 tc rubber-e .288 2/tc pvc-iia .450 .195 48 50.0 40 80 peak .0117 1.49 .0585 7.32 10.67 8000 78a 19/ 0.3 tc rubber-e .288 1/tc pvc-iia .420 .149 48 50.0 40 80 peak .0117 0.64 ccs air-space 7.24 pvc-i 11.76 low 79 .0253 pe .285 1/bc w/armor .463 .136 10.0 40 80 1000 capacitance 0.64 ccs air-space 7.24 pvc-i 11.76 low 79a .0253 pe .285 1/bc w/armor .463 .130 .125 10.0 40 80 1000 capacitance 0.64 ccs air-space 7.24 pvc-iia 11.76 low 79b .0253 pe .285 1/bc w/armor .463 .136 .125 10.0 40 80 1000 capacitance 1.59 bc magnesium 8.15 copper 8.26 81 .0625 oxide g .321 none t ube .325 .172 50 37.0 250 3000 3.18 bc magnesium 16.51 copper 19.05 82 .1250 oxide g .650 none t ube .750 .698 50 36.0 250 5000 2.59 bc 6.1 10.29 low 83 .1020 pe .240 1/bc pvc-i .405 .120 35 44.0 40 80 2000 impedance 2.65 bc 17.27 pvc-iia 25.4 rg 35b with 84a .1045 pe .680 1/bc w/lead sheath 1.000 1.325 75 20.6 40 80 10,000 special armor 2.65 bc 17.27 pvc-iia 39.75 rg 84a with 85a .1045 pe .680 1/bc w/lead armor 1.565 2.910 75 20.6 40 80 10,000 special armor 2 cond. 2.17 .0855 7.62 7.62 86 7/ 0.72 bc pe .300 x 16.51 none none .300 x 16.51 .100 200 7.8 55 80 10,000 twin lead .0285 .650 .650 2.44 .0960 7.11 fg 10.8 87a 7/ 0.81 sc ptfe .280 2/sc braid-v .425 .180 50 29.4 55 250 5000 use rg 225 .0320 1.49 .0585 7.32 13.08 88 19/ 0.3 tc rubber-e .288 4/tc pvc-i .515 .211 48 50.0 40 80 10,000 .0117 1.49 .0585 7.32 13.08 88a 19/ 0.3 tc ruber-e .288 4/tc pvc-iia .515 .211 48 50.0 40 80 10,000 .0117 1.49 .0585 7.32 14.35 88b 19/ 0.3 tc rubber-e .288 4/tc rubber-iv .565 .238 48 50.0 40 80 10,000 .0117 0.64 ccs air-space 7.24 16.05 low 89 .0253 pe .285 1/bc pvc-i .632 .195 125 10.0 40 80 1000 capacitance 1.53 .0603 4.95 10.8 excellent 90 7/ 0.51 sc pe .195 3/sc, gs, sc pvc-iia .425 ? 0 30.8 40 80 3000 shielding .0201 5.08 .2000 taped 14.55 fg 18.03 93 19/ 1.02 bc ptfe .573 1/bc braid-v .710 .475 50 29.4 55 250 10,000 use rg 211a .0400
appendix d - typical coaxial cable specifications (continued) max. rg/u inner dielectric number/type jacket weight nom. nom. max. operating t ype conductor material dod of shielding material o.d. (lb/ft) imped. cap operating v oltage comments cable braids (ohms) pf/ft temp. (c? (volts rms) 2.86 .1125 taped 7.42 fg 11.3 94 19/ 0.57 sc ptfe .292 2/bc braid-v .445 .270 50 29.4 55 250 7000 use rg 226 .0225 3.23 .1270 taped 9.4 fg 12.7 94a 19/ 0.65 sc ptfe .370 2/bc braid-v .500 .445 50 29.4 55 250 7000 use rg 226 .0254 1.87 .0735 3.71 6.15 use up to 100 19/ 0.37 bc pe .146 1/bc pvc-i .242 .046 35 44.0 40 80 2000 1000 mhz .0147 1.63 bc 14.94 101 .0641 rubber 1/tc .588 ?5 2 cond. 102 2.05 bc rubber 1/tc 27.64 140 .0808 1.088 2 cond. 0.96 .0378 2.01 5.97 108 7/ 0.32 tc pe .079 1/tc pvc-ii .235 .032 78 19.6 40 80 1000 use rg 108a .0126 each 2 cond. 0.96 .0378 2.01 5.97 108a 7/ 0.32 tc pe .079 1/tc pvc-iia .235 .032 78 19.6 40 80 1000 balanced line .0126 each 2 cond. 1.16 .0456 7.24 pvc-ii 12.14 111 7/ 0.39 bc pe .285 2/tc w/armor .478 .146 95 16.0 40 80 1000 use rg 111a .0152 2 cond. 1.16 .0456 7.24 pvc-iia 12.14 use rg 22b 111a 7/ 0.39 bc pe .285 2/tc w/armor .478 .146 95 16.0 40 80 1000 w/armor .0152 0.18 ccs air-space 7.24 10.29 114 .0070 pe .285 1/bc pvc-i .405 .087 185 6.5 40 80 1000 use rg 114a 0.18 ccs air-space 7.24 10.29 low 114a .0070 pe .285 1/bc pvc-iia .405 .087 185 6.5 40 80 1000 capacitance 2.13 .0840 taped 6.35 fg 9.53 115 7/ 0.71 sc ptfe .250 2/bc braid-v .375 .148 50 29.4 55 250 5000 use rg 115a .0280 2.13 .0840 taped 6.48 fg 10.54 extra flexible 115a 7/ 0.71 sc ptfe .255 2/bc braid-v .415 .180 50 29.4 55 250 5000 rg 225 .0280 2.44 .0960 7.11 fg braid-v 12.7 116 7/ 0.81 sc ptfe .280 2/sc w/armor .475 .198 50 29.4 55 250 5000 use rg 227 .0320 4.78 bc 15.75 fg 18.54 117 .1880 ptfe .620 1/bc braid-v .730 .641 50 29.4 55 250 7000 use rg 211a 4.78 bc 15.75 fg 18.54 117a .1880 ptfe .620 1/bc braid-v .730 .641 50 29.4 55 250 7000 use rg 211a 4.78 bc 15.75 fg braid-v 19.81 118 .1880 ptfe .620 1/bc w/armor .780 .682 50 29.4 55 250 7000 use rg 228a 4.78 bc 15.75 fg braid-v 19.81 118a .1880 ptfe .620 1/bc w/armor .780 .682 50 29.4 55 250 7000 use rg 228a 2.59 bc 8.43 fg 11.81 use up to 119 .1020 ptfe .332 2/bc braid-v .465 .225 50 29.4 55 250 6000 1000 mhz 2.59 bc 8.43 fg 13.28 rg 119 120 .1020 ptfe .332 2/bc braid-v .523 .282 50 29.4 55 250 6000 w/armor 0.76 .0300 2.44 4.06 use up to 122 7/ 0.13 tc pe .096 1/tc pvc-iia .160 .016 50 29.4 40 80 1900 1000 mhz .0050 0.64 tccs taped 3.43 fg 6.1 124 .0253 ptfe .135 1/tc braid-v .240 .210 73 20.3 55 250 2300 use rg 140 0.4 ccs air-space 11.68 15.24 low 125 .0159 pe .460 1/bc pvc-iia .600 .180 150 7.8 40 80 2000 capacitance 1.55 .0609 4.7 fg 7.11 high 126 7/ 0.52 hr ptfe .185 1/hr braid-v .280 .070 50 29.4 55 250 3000 loss cable .0203 289 catalog 1307191 dimensions are in millimeters dimensions are shown for usa: 1-800-522-6752 south america: 55-11-2103-6000 revised 3-07 and inches unless otherwise reference purposes only. canada: 1-905-470-4425 hong kong: 852-2735-1628 specified. values in brackets specifications subject mexico: 01-800-733-8926 japan: 81-44-844-8013 www.tycoelectronics.com are standard equivalents. to change. c. america: 52-55-1106-0803 uk: 44-8706-080-208 rf coax connectors
290 catalog 1307191 dimensions are in millimeters dimensions are shown for usa: 1-800-522-6752 south america: 55-11-2103-6000 revised 3-07 and inches unless otherwise reference purposes only. canada: 1-905-470-4425 hong kong: 852-2735-1628 specified. values in brackets specifications subject mexico: 01-800-733-8926 japan: 81-44-844-8013 www.tycoelectronics.com are standard equivalents. to change. c. america: 52-55-1106-0803 uk: 44-8706-080-208 rf coax connectors appendix d - typical coaxial cable specifications (continued) max. rg/u inner dielectric number/type jacket weight nom. nom. max. operating t ype conductor material dod of shielding material o.d. (lb/ft) imped. cap operating v oltage comments cable braids (ohms) pf/ft temp. (c? (volts rms) 2 cond. 2.17 .0855 11.99 15.88 rg 57 w/ 130 7/ 0.72 bc pe .472 1/tc pvc-i .625 .220 95 17.0 40 80 3000 t wisted cond. .0285 2 cond. 2.17 .0855 11.99 pvc-i 17.35 armored 131 7/ 0.72 bc pe .472 1/tc w/armor .683 .290 95 17.0 40 80 3000 rg 130 .0285 0.72 bc 7.24 10.29 133 .0285 pe .285 1/bc pvc-i .405 .094 95 16.2 40 80 4000 use rg 133a 0.64 bc 7.24 10.29 95 ohm version 133a .0253 pe .285 1/bc pvc-iia .405 .094 95 16.2 40 80 4000 rg 8 0.64 sccs 3.71 5.92 see rg 302 for 140 .0250 ptfe 1.46 1/sc fg braid-v .233 .056 75 19.5 55 250 2300 fep jacket 0.91 sccs 2.95 4.83 141 .0359 ptfe .116 1/sc fg braid-v .190 .036 50 29.4 55 250 1900 use rg 141a 0.99 sccs 2.95 4.83 see rg 303 for 141a .0390 ptfe .116 1/sc fg braid-v .190 .036 50 29.4 55 250 1900 fep jacket 0.91 sccs 2.95 4.95 142 .0359 ptfe .116 2/sc fg braid-v .195 .047 50 29.4 55 250 1900 use rg 142a 0.99 sccs 2.95 4.95 see rg 142b for 142a .0390 ptfe .116 2/sc fg .195 .047 50 29.4 50 250 1900 fep jacket 0.99 sccs 2.95 4.95 standard center 142b .0390 ptfe .116 2/sc fep .195 .047 50 29.4 55 250 1900 cond. available 1.45 sccs 4.7 8.26 143 .0570 ptfe .185 2/sc fg braid-v .325 .114 50 29.4 55 250 3000 use rg 143a 1.5 sccs 4.7 8.26 see rg 304 for 143a .0590 ptfe .185 1/sc fg braid-v .325 .109 50 29.4 55 250 3000 fep jacket 1.36 .0537 air-space 7.24 10.41 high temp. 144 7/ 0.45 sccs pe .285 copper tube fg braid-v .410 .137 75 19.5 55 250 5000 rg 11a .0179 2 cond. 1.83 bc air-space 145 .0720 ptfe 1/bc lead/tar 75 14.6 0.18 ccs 7.24 9.53 low 146 .0070 pe .285 1/bc fg braid-v .375 .108 190 6.0 55 200 1000 capacitance 6.35 bc 23.11 pvc-i 49.2 rg 19u 147 .2500 pe .910 1/bc w/armor 1.937 ? 2 29.5 40 80 14,000 w/armor 2.17 .0855 7.24 pvc-i 20.32 148 7/ 0.72 bc ptfe .285 1/sc w/armor .800 ? 2 29.5 40 80 4000 .0285 1.22 .048 7.24 10.29 149 7/ 0.4 tc pe .285 1/bc pvc-iia .405 .105 75 20.6 40 80 5000 use rg 391 .0159 1.22 .048 7.24 pvc-iia 11.76 150 7/ 0.4 tc pe .285 1/bc w/armor .463 .112 75 20.6 40 80 5000 use rg 392 .0159 2.17 .0855 pe and 7.24 13.72 t riaxial pulse 156 7/ 0.72 tc cond. pe .285 3/tc, gs, tc pvc-iia .540 .211 50 32.0 40 80 10,000 cable .0285 2.55 .1005 pe and 11.56 18.42 t riaxial pulse 157 19/ 0.51 tc cond. pe .455 3/tc, gs, tc pvc-iia .725 .317 50 38.0 40 80 15,000 cable .0201 5.05 .1988 pe and 11.56 18.42 t riaxial pulse 158 37/ 0.72 tc cond. pe .455 3/tc, gs, tc pvc-iia .725 .380 25 78.0 40 80 15,000 cable .0284 0.81 sc taped 2.95 4.95 159 .0320 ptfe .116 1/sc fg braid-v .195 .035 50 29.4 55 250 1900 use rg 141 4 cond. 1.8 .071 8.18 26.8 4 cond. 160 19/ 0.36 2tc, 2bc pe .322 1/bc pvc-i 1.055 125 12.0 40 80 3000 balanced line .0142 0.3 .012 1.45 2.08 161 7/ 0.1 s cad. br ptfe .057 1/sc nylon .082 .015 70 20.0 60 120 1000 miniature .004 2.65 bc 17.27 22.1 rg 35b without 164 .1045 pe .680 1/bc pvc-iia .870 .490 75 20.6 40 80 10,000 armor
appendix d - typical coaxial cable specifications (continued) max. rg/u inner dielectric number/type jacket weight nom. nom. max. operating t ype conductor material dod of shielding material o.d. (lb/ft) imped. cap operating v oltage comments cable braids (ohms) pf/ft temp. (c? (volts rms) 2.44 .0960 7.24 fg 10.41 rg 225 w/one 165 7/ 0.81 sc ptfe .285 1/sc braid-v .410 .121 50 29.4 55 250 5000 braid .0320 2.44 .0960 7.24 fg braid-v 11.68 rg 165 166 7/ 0.81 sc ptfe .285 1/sc w/armor .460 .144 50 29.4 55 250 5000 w/ armor .0320 0.48 .0189 1.52 2.54 miniature data 174 7/ 0.16 ccs pe .060 1/tc pvc .100 .008 50 30.8 40 80 1500 t ransmission .0063 0.48 .0189 1.52 2.54 miniature data 174a 7/ 0.16 ccs pe .060 1/tc pvc-iia .100 .008 50 30.8 40 80 1500 t ransmission .0063 3.43 7.24 10.29 176 .135 helix over pe 1/magnet wire pvc-i .120 2240 49.0 40 80 5000 magnetic core .285 .405 177 4.95 bc pe 17.27 2/sc pvc-iia 22.73 .470 50 30.8 40 80 11,000 high frequency .195 .680 .895 rg 218 0.3 .0120 0.91 1.83 178 7/ 0.1 sccs ptfe .036 1/sc kel-f .072 .0054 50 29.4 40 150 1000 use rg 178b .0040 0.3 .0120 0.86 1.83 178a 7/ 0.1 sccs ptfe .034 1/sc kel-f .072 .005 50 29.4 40 150 1000 use rg 178b .0040 0.3 .0120 0.86 1.83 high strength 178b 7/ 0.1 sccs ptfe .034 1/sc fep-ix .072 .0054 50 29.4 55 200 1000 cond. available .0040 0.3 .0120 1.45 2.54 179 7/ 0.1 sccs ptfe .057 1/sc kel-f .100 .010 70 20.4 55 150 1200 use rg 179b .0040 0.3 .0120 1.6 2.54 179a 7/ 0.1 sccs ptfe .063 1/sc kel-f .100 .010 75 19.5 40 150 1200 use rg 179b .0040 0.3 .0120 1.6 2.54 high strength 179b 7/ 0.1 sccs ptfe .063 1/sc fep-ix .100 .010 75 19.5 55 200 1200 cond. available .0040 0.3 .0120 2.62 3.56 180 7/ 0.1 sccs ptfe .103 1/sc kel-f .140 .019 93 15.4 40 150 1500 use rg 180b .0040 0.3 .0120 2.59 3.56 180a 7/ 0.1 sccs ptfe .102 1/sc kel-f .140 .019 95 15.4 40 150 1500 use rg 180b .0040 0.3 .0120 2.59 3.56 high strength 180b 7/ 0.1 sccs ptfe .102 1/sc kep-ix .140 .019 95 15.4 55 200 1500 cond. available .0040 2 cond. 1.21 2/individual .0477 5.33 inner 16.25 balanced 181 7/ 0.4 bc pe .210 common pvs-iia .640 .198 125 12.0 40 80 3500 line .0159 outer bc 2 of 19/ 0.36 bc 2/ 8.43 each core .0142 4 cores .332 1/bc pvc-iia each 26.8 125 12.0 2300 special 4 182 2 of 19/ 0.17 tc pe 2/ 3.71 overall shield pvc-i overall 1.055 each each 40 80 3000 coaxial .0066 .146 1/bc 183 6.38 bc ps helix 16.05 ai. tube none 19.05 .380 50 23.0 40 80 1800 see times .2510 .632 .750 am-5034s 0.08 [.0031] air-space 4.78 7.16 delay line 185 mag. wire helix 1/magnet wire pvc-iia 2000 40 80 on pe core pe .188 .282 cable 291 catalog 1307191 dimensions are in millimeters dimensions are shown for usa: 1-800-522-6752 south america: 55-11-2103-6000 revised 3-07 and inches unless otherwise reference purposes only. canada: 1-905-470-4425 hong kong: 852-2735-1628 specified. values in brackets specifications subject mexico: 01-800-733-8926 japan: 81-44-844-8013 www.tycoelectronics.com are standard equivalents. to change. c. america: 52-55-1106-0803 uk: 44-8706-080-208 rf coax connectors
292 catalog 1307191 dimensions are in millimeters dimensions are shown for usa: 1-800-522-6752 south america: 55-11-2103-6000 revised 3-07 and inches unless otherwise reference purposes only. canada: 1-905-470-4425 hong kong: 852-2735-1628 specified. values in brackets specifications subject mexico: 01-800-733-8926 japan: 81-44-844-8013 www.tycoelectronics.com are standard equivalents. to change. c. america: 52-55-1106-0803 uk: 44-8706-080-208 rf coax connectors appendix d - typical coaxial cable specifications (continued) max. rg/u inner dielectric number/type jacket weight nom. nom. max. operating t ype conductor material dod of shielding material o.d. (lb/ft) imped. cap operating v oltage comments cable braids (ohms) pf/ft temp. (c? (volts rms) 0.3 .0120 1.52 2.67 187 7/ 0.1 sccs ptfe .060 1/sc ptfe .105 .010 75 19.5 55 250 1200 use rg 179b .0040 0.3 .0120 1.52 2.67 187a 7/ 0.1 sccs ptfe .060 1/sc ptfe .105 .010 75 19.5 55 250 1200 use rg 179b .0040 0.51 .0201 1.52 2.67 188 7/ 0.17 sccs ptfe .060 1/sc ptfe .105 .011 50 29.4 55 250 1200 use rg 316 .0067 0.51 .0201 1.52 2.67 188a 7/ 0.17 sccs ptfe .060 1/sc ptfe .105 .011 50 29.4 55 250 1200 use rg 316 .0067 189 6.38 bc ps helix 16.05 2/sc pe-iiia 22.23 .570 50 23.0 55 80 3500 use rg 389 .2510 .632 .875 1.49 .0585 9.65 3/tc, 17.78 190 7/ 0.3 tc rubber h, j .380 gs, tc neoprene viii .700 .353 50 50.0 55 80 15,000 .0117 191 12.32 tc braid rubber h, j, h 27.05 3/tc, neoprene viii 37.08 1.469 25 85.0 55 80 15,000 .485 1.065 gs, gs 1.460 192 26.8 gs tube butyl rubber 3/tc, rubber 55.88 12.5 175.0 55 80 15,000 1.055 tc braid gs, gs 2.200 peak 193 26.8 gs tube silicone 3/tc, rubber 53.34 12.5 159.0 55 80 30,000 1.055 tc braid rubber gs, gs 2.100 peak 194 26.8 gs tube silicone 3/tc, rubber w/ 49.4 12.5 159.0 55 80 30,000 1.055 tc braid rubber gs, gs al. armor 1.945 peak 0.3 .0120 2.59 1/sc 3.68 195 7/ 0.1 sccs ptfe .102 ptfe .145 .020 95 15.4 55 250 1500 use rg 180b .004 0.3 .0120 2.59 1/sc 3.68 195a 7/ 0.1 sccs ptfe .102 ptfe .145 .020 95 15.4 55 250 1500 use rg 180b .004 0.3 .0120 0.86 1/sc 1.83 196 7/ 0.1 sccs ptfe .034 ptfe .072 .006 50 29.4 55 250 1000 use rg 178b .004 0.3 .0120 0.86 1/sc 1.83 196a 7/ 0.1 sccs ptfe .034 ptfe .072 .006 50 29.4 55 250 1000 use rg 178b .004 197 7.62 bc ps helix 19.25 22.23 [.875] none 22.23 .500 50 22.0 55 80 2400 .300 .758 od al. tube .875 peak 198 2.9 bc ps helix 10.69 12.7 [.500] pe 15.24 .155 70 16.0 55 80 1300 .1140 .421 od al. tube .600 peak 199 5.31 bc ps helix 19.25 22.23 [.875] pe 25.78 .435 70 16.0 55 80 2400 .209 .758 od al. tube 1.015 peak od- 10.29 .405 37.39 41.28 [1.625] 44.83 4600 200 id- 7.65 bc tube ps helix 1.472 od al. tube pe 1.765 .900 70 16.0 55 80 peak .301 4.8 .189 air-space 12.7 2/sc sr and 18.42 low loss 209 19/ 0.96 sc ptfe .500 polyester-iv .725 .432 50 25.0 55 150 3200 rg 211a .0378 210 0.64 sccs air-space 3.71 1/sc fg braid-v 6.15 .040 93 13.5 55 250 750 high temp. .0253 ptfe .146 .242 low capacitance 211 4.83 bc ptfe 15.75 1/bc fg braid-v 18.54 .641 50 29.4 55 250 7000 high temp. .1900 .620 .730 high power 211a 4.83 bc ptfe 15.75 1/bc fg braid-v 18.54 .641 50 29.4 55 250 7000 high temp. .1900 .620 .730 high power 212 1.44 sc pe 4.7 2/sc pvc-iia 8.43 .083 50 29.4 40 80 3000 use up to .0556 .185 .332 10,000 mhz 2.26 .0888 7.24 1/bc pvc-iia 10.29 use up to 213 7/ 0.75 bc pe .285 .405 .099 50 30.8 40 80 5000 1000 mhz .0296
appendix d - typical coaxial cable specifications (continued) max. rg/u inner dielectric number/type jacket weight nom. nom. max. operating t ype conductor material dod of shielding material o.d. (lb/ft) imped. cap operating v oltage comments cable braids (ohms) pf/ft temp. (c? (volts rms) 2.26 .0888 7.24 10.0 use up to 214 7/ 0.75 sc pe .285 2/sc pvc-iia .425 .126 50 30.8 40 80 5000 10,000 mhz .0296 2.26 .0888 7.24 pvc-iia 11.76 armored 215 7/ 0.75 pe .285 1/bc w/armor .463 .121 50 30.8 40 80 5000 rg 213 .0296 1.21 .0477 7.24 10.8 use up to 216 7/ 0.75 bc pe .285 2/bc pvc-iia .425 .114 75 20.6 40 80 5000 1000 mhz .0159 217 2.7 bc 9.4 2/bc pvc-iia 13.84 .201 50 30.8 40 80 7000 use up to .106 pe .370 .545 1000 mhz 218 4.95 bc 17.27 1/bc pvc-iia 22.1 .460 50 30.8 40 80 11,000 use up to .195 pe .680 .870 1000 mhz 219 4.95 bc 17.27 1/bc pvc-iia 23.57 .585 50 30.8 40 80 11,000 armored .195 pe .680 w/armor .928 rg 218 220 6.6 bc 23.11 1/bc pvc-iia 28.45 .740 50 30.8 40 80 14,000 use up to .260 pe .910 1.120 1000 mhz 221 6.6 bc 23.11 1/bc pvc-iia 29.92 .925 50 30.8 40 80 14,000 armored .260 pe .910 w/armor 1.178 rg 220 1.41 4.7 8.43 high 222 .0556 pe 2/sc pvc-iia .087 50 30.8 40 80 3000 high res. wire .185 .332 attenuation 223 0.89 sc 2.95 2/sc pvc-iia 5.36 .034 50 30.8 40 80 1900 use up to .035 pe .116 .211 10,000 mhz 224 2.609 bc 9.4 2/bc pvc-iia 15.32 .310 50 30.8 40 80 7000 armored .106 pe .370 w/armor .603 rg 217 2.38 .0936 7.24 10.92 see rg 393 for 225 7/ 0.79 sc ptfe .285 2/sc fg braid-v .430 .180 50 29.4 55 250 5000 fep jacket .0312 3.23 .1270 taped 9.4 12.7 226 19/ 0.65 sc ptfe .370 2/sc fg braid-v .500 .445 50 29.4 55 250 7000 .0254 2.38 .0936 7.24 fg braid-v 12.40 armored 227 7/ 0.79 sc ptfe .285 2/sc w/armor .488 .198 50 29.4 55 250 5000 rg 225 .0312 228 4.83 bc 15.75 1/bc fg braid-v 20.02 .682 50 29.4 55 250 7000 armored .1900 ptfe .620 w/armor .788 rg 211 228a 4.83 bc 15.75 1/bc fg braid-v 20.02 .682 50 29.4 55 250 7000 armored .1900 ptfe .620 w/armor .788 rg 211a 2.44 .0960 7.24 fg braid-v 11.68 229 7/ 0.81 sc ptfe .285 1/sc w/armor .460 .144 50 29.4 55 250 5000 use rg 166 .032 5.05 .1988 11.56 3/tc, 18.8 230 37/ 0.72 tc rubber-d .455 gs, gs rubber-iv .740 ? 5 100.0 40 80 15,000 .0284 od- 4.11 12.7 .162 11.43 .500 12.7 5000 rg 331 for 231 id- 2.84 bc foam pe .450 od al. tube none .500 .118 50 25.0 55 80 peak jacketed cable .112 7.62 bc 19.25 22.23 28.07 2400 232 pe helix .875 pe-iiia .570 50 22.0 50 80 .300 .758 od al. tube 1.015 peak od- 15.01 bc 41.28 .591 37.39 1.625 44.83 4700 233 id- 12.22 ps helix 1.472 od al. tube pe-iiia 1.765 1.050 50 22.0 55 80 peak .481 od- 29.39 bc 79.38 1.570 70.49 3.125 83.69 8700 234 id- 25.78 ps helix 2.775 od al. tube pe-iiia 3.295 3.110 50 22.0 55 80 peak 1.015 2.16 .0852 taped 5.72 11.43 rg 115a 235 235 7/ 0.72 ptfe .255 2/sc sil/dac vi .450 .160 50 29.5 55 250 5000 w/vi jacket .0284 293 catalog 1307191 dimensions are in millimeters dimensions are shown for usa: 1-800-522-6752 south america: 55-11-2103-6000 revised 3-07 and inches unless otherwise reference purposes only. canada: 1-905-470-4425 hong kong: 852-2735-1628 specified. values in brackets specifications subject mexico: 01-800-733-8926 japan: 81-44-844-8013 www.tycoelectronics.com are standard equivalents. to change. c. america: 52-55-1106-0803 uk: 44-8706-080-208 rf coax connectors
294 catalog 1307191 dimensions are in millimeters dimensions are shown for usa: 1-800-522-6752 south america: 55-11-2103-6000 revised 3-07 and inches unless otherwise reference purposes only. canada: 1-905-470-4425 hong kong: 852-2735-1628 specified. values in brackets specifications subject mexico: 01-800-733-8926 japan: 81-44-844-8013 www.tycoelectronics.com are standard equivalents. to change. c. america: 52-55-1106-0803 uk: 44-8706-080-208 rf coax connectors appendix d - typical coaxial cable specifications (continued) max. rg/u inner dielectric number/type jacket weight nom. nom. max. operating t ype conductor material dod of shielding material o.d. (lb/ft) imped. cap operating v oltage comments cable braids (ohms) pf/ft temp. (c? (volts rms) 236 4.11 bc 10.69 12.7 [.500] none 12.7 .165 50 24.0 55 80 1300 .1620 ps helix .421 od al. tube .500 peak 237 4.11 bc 10.69 12.7 [.500] pe-iiia 15.24 .195 50 24.0 55 80 1300 .1620 ps helix .421 od al. tube .600 peak 238 use rg 197/u 239 use rg 232/u od- 15.01 bc 41.28 .591 36.07 1.625 41.28 240 id- 12.22 bc ps helix 1.420 od al. tube none 1.625 .930 50 22.0 55 80 4700 .481 241 use rg 233 od- 29.39 79.38 1.157 72.39 3.125 79.3 8700 242 id- 25.78 ps helix 2.850 od al. tube none 3.125 2.700 50 22.0 55 80 peak 1.0150 243 use rg 234 244 2.59 bc 10.69 12.7 [.500] none 12.7 .118 75 15.5 55 80 1200 .102 ps helix .421 od al. tube .500 peak 245 2.59 bc 10.69 12.7 [.500] pe-iiia 15.24 .148 75 15.5 55 80 1200 .102 ps helix .421 od al. tube .600 peak 246 4.78 bc 19.25 22.23 [.875] none 22.23 .348 75 15.2 55 80 2200 .1880 ps helix .758 od al. tube .875 peak 247 4.78 bc 19.25 22.23 [.875] pe-iiia 25.78 .418 75 15.2 55 80 2200 .1880 ps helix .758 od al. tube 1.015 peak od- 9.5 bc 41.28 .3740 37.39 1.625 41.28 4300 248 id- 6.96 ps helix 1.472 od al. tube none 1.625 .948 75 15.0 55 80 peak 27.40 od- 9.5 bc .3740 37.39 41.28 44.83 4300 249 id- 6.96 ps helix 1.472 1.625 pe-iiia 1.765 1.068 75 15.0 55 80 peak 27.40 18.59 bc 79.38 .732 72.39 3.125 79.38 8500 250 16.05 ps helix 2.850 od al. tube none 3.125 2.395 75 15.0 55 80 peak .632 18.59 bc 79.38 .732 72.39 3.125 32.95 8500 251 16.05 ps helix 2.850 od al. tube pe-iiia 2.805 .175 75 15.0 55 80 peak .632 252 4.24 bc 11.58 13.46 [.530] none 13.46 .225 50 24.0 55 80 1000 .1670 pe tubes .456 od al. tube .530 253 4.24 bc 11.58 13.46 [.530] pe 16.64 .655 50 24.0 55 80 1000 .1670 pe tubes .456 od al. tube .655 254 7.9 bc 21.16 24.21 [.953] pe 27.94 .555 50 24.0 55 80 1860 .3110 pe tubes .833 od al. tube 1.100 255 7.9 bc 21.16 24.21 [.953] none 24.21 .550 50 24.0 55 80 1860 .3110 pe tubes .833 od al. tube .953 od- 7.9 sc 24.21 .3110 21.16 .953 24.21 256 id- 6.48 ptfe tubes .833 od al. tube none .953 1.200 50 24.0 55 80 1860 .2550 od- 15.39 45.36 .6060 41.2 1.786 45.36 257 id- 1.23 bc ps tubes 1.622 od al. tube none 1.786 1.380 50 24.0 55 80 3640 .4860 od- 15.39 45.36 .6060 41.2 1.786 48.92 258 id- 1.23 bc tube ps tubes 1.622 od al. tube pe 1.926 .100 50 24.0 55 80 3640 .4860 259 2.92 bc tube 8.08 9.91 [.390] none 9.91 .140 50 24.0 55 80 697 .1150 ptfe tubes .318 od al. tube .390 260 2.92 bc tube 8.08 9.91 [.390] pe-iiia 11.43 .170 50 24.0 55 80 697 .1150 pe tubes .318 od al. tube .450 263 4.37 bc air-space 10.69 none 12.7 .336 50 21.5 40 250 1300 .1720 ptfe .421 al. tube .500 peak 4 cond. 19/ 0.36 4.47 2 tc, 2 bc 19.05 264 .0142 pe .176 pvc-iia .327 36.8 41.0 40 80 2000 use rg 264c 2 tc, 2 bc e/core bc overall .750
appendix d - typical coaxial cable specifications (continued) max. rg/u inner dielectric number/type jacket weight nom. nom. max. operating t ype conductor material dod of shielding material o.d. (lb/ft) imped. cap operating v oltage comments cable braids (ohms) pf/ft temp. (c? (volts rms) 4 cond. 19/ 0.36 4.47 2 tc, 2 bc 19.05 264a .0142 pe .176 pur .327 36.8 41.0 40 80 2000 use rg 264c 2 tc, 2 bc e/core bc overall .750 4 cond. 1.73 4.72 2 tc, 2 bc 19.43 w atertight 264c .068 pe .186 pur 40 38.4 40 80 2000 2 bc, 2 tc e/core bc overall .765 4 coax. 265 17.2 bc tube 40.08 copper clad pe-iiia 52.58 .120 50 22.3 40 80 145 kw .6770 pe helix 1.578 mild steel tube 2.070 peak 0.29 cond. over 75 spiral 266 .0113 pe 7.24 w ound cond. pvc-i 10.16 1530 53.0 40 80 5000 dc delay line cable 3.66 mag. core .285 68 bc & 7 .400 50 ns/ft .144 are insulated 9.02 bc tube copper clad 30.23 44 kw 267 ps helix mild steel pe-iiia .234 50 22.2 40 80 .3550 cor. tubing 1.190 peak 268 4.09 bc 8.89 corrugated none 12.65 .430 50 23.0 55 80 10 kw .1610 pe helix .350 bc tube .498 peak id- 7.29 .2870 20.19 corrugated 23.53 44 kw 269 od- 9.09 bc pe helix .795 bc tube none 1.005 .430 50 22.2 55 80 peak .3580 tube od- 7.29 .2870 20.19 corrugated 23.53 44 kw 269a id- 9.09 bc pe helix .795 bc tube none 1.005 .875 50 22.2 55 80 peak .3580 tube id- 14.94 .5880 40.08 corrugated 46.48 145 kw 270 od- 17.48 bc pe helix 1.578 bc tube none 1.830 .875 50 22.3 55 80 peak .6880 tube id- 14.94 .5880 40.08 corrugated 46.48 145 kw 270a od- 17.48 bc pe helix 1.578 bc tube none 1.830 .125 50 22.3 55 80 peak .6880 tube 0.64 extra flex. .0250 air-space 2.79 3.68 high temp. extra flex. 279 19/ 0.13 sccs ptfe .110 1/sc fg braid-v .145 .200 75 19.5 55 250 cable high temp. cable .0050 280 2.91 bc taped 8.31 2/sc fep-ix 11.89 .400 50 25.4 55 200 3000 low loss .1144 ptfe .327 .468 high frequency 4.8 .1890 taped 12.7 19.05 low loss 281 19/ 0.96 sc ptfe .500 2/sc sil./dac-vi .750 .031 50 25.4 55 150 4000 high power .0378 282 0.64 sc irradiated 2.51 2/sc fep 5.08 .145 54.5 28.2 40 150 4500 .0253 pe .099 .200 1.49 .0585 7.31 12.07 283 19/ 0.3 sc rubber-d .288 2/sc sil. .475 .410 46 50.0 55 150 8000 .0117 284a 5.59 bc 20.19 corrugated none 25.53 .430 75 15.0 55 80 29 kw .220 pe helix .795 bc tube 1.005 285a 2.9 bc ptfe 20.19 corrugated none 25.53 .720 100 13.0 55 200 22 kw .1140 helix .795 bc tube 1.005 peak od- 10.92 .4300 39.88 corrugated 46.48 100 kw 286 id- 9.14 bc pe helix 1.570 bc tube none 1.830 .750 75 15.1 55 80 peak .3600 tube 287 5 bc 39.88 corrugated none 46.48 3.000 100 13.5 55 80 73 kw .1970 pe helix 1.570 bc tube 1.830 peak od- 8.46 .3330 75.18 95.25 ccs 95.25 440 kw 288 id- 5.64 bc pe helix 2.960 3.750 none 3.750 3.000 50 21.6 40 80 peak .2221 tube od- 20.83 .8200 75.18 95.25 ccs 95.25 290 kw 289 id- 18.8 ccs pe helix 2.960 3.750 none 3.750 1.040 75 14.7 40 80 peak .7400 tube 292 10.92 bc tube 39.88 46.48 [1.8300] pe and 50.8 .160 75 15.1 55 80 100 kw .4300 pe helix 1.570 corr. bc tube flooding comp. 2.000 peak 293 2.69 bc 9.53 13.84 .160 50 30.8 55 80 7000 use rg 293a .106 pe .375 1/sc pe-iiia .545 295 catalog 1307191 dimensions are in millimeters dimensions are shown for usa: 1-800-522-6752 south america: 55-11-2103-6000 revised 3-07 and inches unless otherwise reference purposes only. canada: 1-905-470-4425 hong kong: 852-2735-1628 specified. values in brackets specifications subject mexico: 01-800-733-8926 japan: 81-44-844-8013 www.tycoelectronics.com are standard equivalents. to change. c. america: 52-55-1106-0803 uk: 44-8706-080-208 rf coax connectors
296 catalog 1307191 dimensions are in millimeters dimensions are shown for usa: 1-800-522-6752 south america: 55-11-2103-6000 revised 3-07 and inches unless otherwise reference purposes only. canada: 1-905-470-4425 hong kong: 852-2735-1628 specified. values in brackets specifications subject mexico: 01-800-733-8926 japan: 81-44-844-8013 www.tycoelectronics.com are standard equivalents. to change. c. america: 52-55-1106-0803 uk: 44-8706-080-208 rf coax connectors appendix d - typical coaxial cable specifications (continued) max. rg/u inner dielectric number/type jacket weight nom. nom. max. operating t ype conductor material dod of shielding material o.d. (lb/ft) imped. cap operating v oltage comments cable braids (ohms) pf/ft temp. (c? (volts rms) 293a 2.69 bc 9.4 pe-iiia 13.84 .205 50 30.8 55 80 7000 w atertight .106 pe .370 1/sc .545 rg 217 2 cond. 2.05 11.99 16 294 .0808 pe 1/tc pe-iiia .205 95 16.3 55 80 3000 use rg 294a 1 bc, 1 tc .472 .630 2 cond. 2.05 11.99 16 w atertight 294a .0808 pe 1/sc pe-iiia .420 95 16.3 55 80 3000 1 bc, 1 tc .472 .630 rg 130 295 4.95 bc 17.27 pe-iiia 22.73 ? 0 30.8 55 80 11,000 w atertight .1950 pe .680 1/sc .895 rg 218 5.97 .2352 silicone 23.01 30.23 296 37/ 0.85 sc rubber .906 1/sc neoprene 1.190 ? 0 36.4 55 80 13,800 .0336 od- 9.02 .3550 pfte 20.19 corrugated 25.53 44 kw 297 id- 7.29 bc helix .795 bc tube none 1.005 .090 50 21.4 55 200 peak .2870 tube 15.32 .6030 2.92 16.51 buoyant 298 7/ 0.51 ccs pe .115 none foam pe .650 .056 55 80 per mil-c-22667 .0201 1.55 .0609 4.7 6.23 fep jacketed 301 7/ 0.52 hr ptfe .185 1/hr fep-ix .245 .031 50 29.4 55 200 3000 rg 126 .0203 302 0.64 sccs 3.71 fep-ix 5.11 .030 75 19.5 55 200 2300 fep jacketed .0250 ptfe .146 1/sc .201 rg 140 303 0.99 sccs 2.95 fep-ix 4.32 .088 50 29.4 55 200 1900 fep jacketed .0390 ptfe .116 1/sc .170 rg 141a 304 1.5 sccs 4.7 fep-ix 7.11 ? 0 29.4 55 200 300 fep jacketed .0590 ptfe .185 2/sc .280 rg 143a od- 10.92 .4300 fep 39.88 46.48 bc tube 50.55 305 id- 9.14 1.570 1.830 pe-iiia 1.990 .545 75 14.4 55 80 2720 .3600 tube 306a 4.39 bc 20.35 22.23 ai. tube pe-iiia 25.78 .070 75 16.5 55 80 5700 per mil-c-23806 .1730 foam pe .801 .8750 1.015 0.74 .0290 3.71 2/sc 6.86 triax 307 19/ 0.15 sc foam pe .146 pur interlayer pe-iiia .270 .070 75 16.7 55 80 1000 use to 100 mhz .0058 0.74 .0290 3.71 2/sc 6.86 triax 307a 19/ 0.15 sc foam pe .146 pur interlayer pe-iiia .270 .060 75 16.7 55 80 1000 use to 100 mhz .0058 0.51 .0201 1.52 2.59 fep jacketed 316 7/ 0.17 sccs ptfe .060 1/sc fedp-ix .102 .012 50 29.4 55 200 1200 rg 188a .0067 2 cond. 2.21 .0870 11.33 18.03 w ater 317 7/ 0.74 bc fep .446 1/tc neoprene .710 ? 5 15.4 55 80 10,000 blocked .0290 od- 9.09 bc 25.53 .3580 tube 20.19 1.005 28.58 44 kw 318 id- 7.29 pe helix .795 corr. bc tube pe-iiia 1.125 .530 50 22.0 55 80 peak .2870 od- 17.48 bc 46.48 .6880 tube 39.88 1.830 50.8 145 kw 319 id- 14.94 pe helix 1.570 corr. bc tube pe-iiia 2.000 1.040 50 22.0 55 80 peak .5580 od- 28.96 79.39 72.39 320 kw 321 1.1400 pe helix 2.850 none 1.210 50 21.7 55 80 corr. bc tube corr. bc tube 2.850 peak od- 28.96 79.39 pe & flood 77.22 320 kw 322 1.1400 pe helix 2.850 1.780 50 21.7 55 80 corr. bc tube corr. bc tube comp. 3.040 peak
appendix d - typical coaxial cable specifications (continued) max. rg/u inner dielectric number/type jacket weight nom. nom. max. operating t ype conductor material dod of shielding material o.d. (lb/ft) imped. cap operating v oltage comments cable braids (ohms) pf/ft temp. (c? (volts rms) 7.92 bc tube 24.89 pe & flood 26.92 323 foam pe .980 .420 50 25.6 55 80 1480 .312 corr. bc tube comp. 1.060 7.92 bc tube 24.89 24.89 324 foam pe .980 none .320 50 25.6 55 80 1480 .312 corr. bc tube .980 2.54 .1000 6.6 2/sc strip 8.89 325 19/ 0.51 sc al. pe spline .260 braids pur .350 .10 50 26.3 55 80 750 low loss .0200 5.08 .2000 13.97 2/sc strip 17.7 326 19/ 1.02 sc al. pe spline .550 braids pur .697 .24 50 26.3 55 80 1700 low loss .0400 8.13 .3200 21.34 2/sc strip 25.65 327 19/ 1.63 sc al. pe spline .840 braids pur 1.010 .55 50 26.3 55 80 2500 low loss .0640 328 12.32 tc braid rubber 27.05 3/tc, neoprene 37.08 1.469 25 85.0 55 80 20,000 .4850 h.j.h. 1.065 gs, tc 1.460 1.49 .0585 rubber 9.65 3/tc, 17.78 329 19/ 0.3 tc h.j.h. .380 gs, tc neoprene .700 .353 50 50.0 55 80 15,000 .0117 6.15 330 sc foam pe 1/sc .242 ? 0 25.0 331 4.11 bc 11.43 12.7 al. tube pe-iiia 15.24 .187 50 25.0 55 80 2500 jacketed 231 .1620 foam pe .450 .500 .600 solid conductor 332 7.11 bc 20.35 22.23 al. tube none 22.23 .466 50 25.0 55 80 4500 per mil-c-23806 .2800 foam pe .801 .8750 .875 333 7.11 bc 20.35 22.23 al. tube pe-iiia 25.78 .548 50 25.0 55 80 4500 jacketed rg 332 .2800 foam pe .801 .8750 1.015 334 2.49 bc 11.43 12.7 al. tube none 12.7 .109 75 17.0 55 80 2500 per mil-c-23806 .0980 foam pe .450 .500 .500 335 2.49 bc 11.43 12.7 al. tube pe-iiia 15.88 .143 75 17.0 55 80 2500 jacketed rg 334 .0980 foam pe .450 .500 .625 336 4.39 bc 20.35 22.23 al. tube none 22.23 .315 75 17.0 55 80 4000 per mil-c-23806 .1730 foam pe .801 .8750 .875 360 6.17 bc 17.17 19.05 al. tube pe-iiia 20.95 .397 50 25.0 55 80 4000 per mil-c-23806 .2430 foam pe .676 .7500 .825 4.06 13.72 15.75 366 foam pe .540 pe-iiia 50 62.6 55 80 4000 .1600 corr. bc tube .620 corrugated 12.7 132.08 830 kw 367 pe helix .5000 pe-iiia 4.590 50 21.7 55 80 bc tube corr. bc tube 5.2000 peak 369 2.97 bc 8.08 9.91 al. tube pe-iiia 11.94 .140 50 24.0 55 80 700 .1170 pe tubes .318 .390 .470 370 2.97 bc 8.08 9.91 al. tube none 9.91 .100 50 24.0 40 80 700 .1170 pe tubes .318 .390 .390 374 0.72 bc 4.06 foam pe 16.51 .097 55 80 buoyant .0285 pe .160 none .650 antennna 376 7.92 bc tube pe-iiia 26.92 .390 50 26.0 55 80 6000 .3120 foam pe corr. al. tube 1.060 377 4.19 sc tube 13.46 al. tube none 13.36 .170 50 24.0 55 250 1000 .1650 ptfe tubes .5300 .530 18.11 bc tube 46.48 50.8 145 kw 378 pe helix 1.830 pe-iiia .620 50 22.1 55 80 .7130 corr. al. tube 2.000 peak 2 cond. 1.02 16.51 exper. buoyant 383 .0403 pe none foam pe 100 55 80 2000 lb. break .650 twisted pair 384 1.29 bc 1/flat bc braid foam pe 16.51 ? 0 30.8 55 80 buoyant antennna .0508 pe w aterproofed .650 600 psig. 385 3.89 sc semi-solid 10.8 12.7 corr. al. optional 16.76 .178 50 25.0 55 250 1500 low loss .1530 ptfe .425 .500 .660 no press. req. 297 catalog 1307191 dimensions are in millimeters dimensions are shown for usa: 1-800-522-6752 south america: 55-11-2103-6000 revised 3-07 and inches unless otherwise reference purposes only. canada: 1-905-470-4425 hong kong: 852-2735-1628 specified. values in brackets specifications subject mexico: 01-800-733-8926 japan: 81-44-844-8013 www.tycoelectronics.com are standard equivalents. to change. c. america: 52-55-1106-0803 uk: 44-8706-080-208 rf coax connectors
298 catalog 1307191 dimensions are in millimeters dimensions are shown for usa: 1-800-522-6752 south america: 55-11-2103-6000 revised 3-07 and inches unless otherwise reference purposes only. canada: 1-905-470-4425 hong kong: 852-2735-1628 specified. values in brackets specifications subject mexico: 01-800-733-8926 japan: 81-44-844-8013 www.tycoelectronics.com are standard equivalents. to change. c. america: 52-55-1106-0803 uk: 44-8706-080-208 rf coax connectors appendix d - typical coaxial cable specifications (continued) max. rg/u inner dielectric number/type jacket weight nom. nom. max. operating t ype conductor material dod of shielding material o.d. (lb/ft) imped. cap operating v oltage comments cable braids (ohms) pf/ft temp. (c? (volts rms) 386 1.29 ccs none foam pe 16.51 55 80 buoyant antennna .0508 pe non-hosing .650 400 lb. break 388 11.28 pe-iiia 13.84 ? 0 30.8 55 80 w atertight cs pe .444 max. sc .545 see rg 14a 389 6.35 bc al. 16.13 pe-iiia 22.23 .336 50 22.8 55 80 2000 low loss .2500 pe spline .635 2/sc .875 replaces rg 189 1.22 .048 cond. pe 7.24 10.29 low noise 391 7/ 0.4 tc and pe .285 1/tc pvc-iia .405 .092 72 55 80 5000 cable .0159 1.22 .048 cond. pe 7.24 pvc-iia 12.07 armored 392 7/ 0.4 tc and pe .285 1/tc w/armor .475 .114 72 55 80 5000 rg 391 .0159 2.38 .0936 7.24 9.91 moistureproof 393 7/ 0.79 sc ptfe .285 2/sc fep-ix .390 .165 50 29.4 55 200 5000 rg 225 .0312 2.44 .096 air-space 6.86 8.89 low loss 397 7/ 0.81 sc ptfe .270 2/sc fep-ix .350 .125 50 28.0 55 200 2000 rg 393 .032 0.98 .0385 2.95 4.95 400 19/ 0.2 spc ptfe .116 2/sc fep-ix .195 .050 50 29.3 55 200 1900 .0077 1.64 spc 5.46 6.35 od 6.35 401 ptfe .250 none .081 50 29.3 40 125 3000 semirigid .0645 .215 copper tube .250 0.91 sccs 3.02 3.58 od 3.58 402 ptfe .141 none .032 50 29.3 40 125 2500 semirigid .0360 .119 copper tube .141 0.3 sccs .012 0.86 2/sc 2.95 t riaxial 403 7/ 0.1 ptfe .034 fep interlayer fep-ix .116 .0075 50 29.3 55 200 2500 rg 178b .004 0.3 sccs .012 ptfe and 0.86 1.83 31.5 low loss 404 7/ 0.1 cond. ptfe .034 1/sc fep-ix .072 .0054 50 max. 55 200 2000 rg 178b .004 0.51 sccs 1.68 2.18 od 2.19 405 ptfe .086 none .015 50 29.4 40 125 1500 semirigid .0201 .066 copper tube .0865
appendix e - maximum power handling capabilities for cables (average input power in watts) rg/u frequency in mhz t ype cable 10 50 100 200 400 1,000 3,000 5,000 10,000 5, 5a, 5b 2,000 800 550 350 230 125 60 40 22 8, 8a, 10a, 213, 215 3,700 1,300 850 540 350 190 95 65 37 9, 9a, 9b, 214 3,700 1,300 850 540 350 190 95 65 37 11, 11a, 12, 12a, 13, 13a, 216 2,500 1,000 650 400 260 150 70 50 26 217 6,000 2,000 1,200 800 480 260 120 85 50 22, 22b 1,700 650 430 280 190 110 50 38 20 55, 55a, 55b, 223 800 310 205 137 90 53 28 20 10 58, 58b 730 280 180 125 85 50 25 17 58a, 58c 650 225 170 110 75 44 22 15 59, 59a, 59b 1,300 480 310 200 135 77 40 27 15 62, 62a, 71, 71a, 71b 1,300 480 310 200 135 77 40 27 15 62b 1,150 420 280 180 120 69 35 25 14 115, 115a, 165, 225, 393 25,000 9,500 6,300 4,300 2,800 1,700 880 620 350 108, 108a 340 145 100 70 50 30 15 122 540 205 140 90 60 35 18 12 140, 141, 141a, 142, 142b, 302, 303, 400, 402 9,000 3,500 2,400 1,600 1,100 650 350 245 140 143, 143a 11,500 4,600 3,200 2,100 1,450 850 460 330 190 144 25,000 9,500 6,300 4,300 2,800 1,700 880 620 350 161, 179, 179a, 179b, 187, 187a 1,600 780 570 420 310 200 110 76 41 174, 174a 170 72 50 36 25 16 178, 178a, 178b, 196, 196a 710 340 240 170 123 78 41 28 14 180, 180a, 180b, 195, 195a 2,500 1,100 800 570 400 250 135 93 50 188, 188a, 316 1,250 600 450 330 240 160 80 57 30 210 8,500 3,300 2,300 1,600 1,100 620 310 220 140 note: v alues above 3 ghz vary considerably depending on construction. conditions ambient: 40? altitude: sea level center conductor temperature: 80? for polyethylene 200? for ptfe 299 catalog 1307191 dimensions are in millimeters dimensions are shown for usa: 1-800-522-6752 south america: 55-11-2103-6000 revised 3-07 and inches unless otherwise reference purposes only. canada: 1-905-470-4425 hong kong: 852-2735-1628 specified. values in brackets specifications subject mexico: 01-800-733-8926 japan: 81-44-844-8013 www.tycoelectronics.com are standard equivalents. to change. c. america: 52-55-1106-0803 uk: 44-8706-080-208 rf coax connectors
300 catalog 1307191 dimensions are in millimeters dimensions are shown for usa: 1-800-522-6752 south america: 55-11-2103-6000 revised 3-07 and inches unless otherwise reference purposes only. canada: 1-905-470-4425 hong kong: 852-2735-1628 specified. values in brackets specifications subject mexico: 01-800-733-8926 japan: 81-44-844-8013 www.tycoelectronics.com are standard equivalents. to change. c. america: 52-55-1106-0803 uk: 44-8706-080-208 rf coax connectors appendix f - nominal loss characteristics for cables (decibels per hundred feet) rg/u frequency in mhz t ype cable 10 50 100 200 400 1,000 3,000 5,000 10,000 5, 5a, 5b .80 1.40 2.90 4.30 6.40 11.00 22.00 30.00 52.00 8, 8a, 10a, 213, 215 .66 1.50 2.20 3.20 4.60 9.00 19.00 28.00 47.00 9, 9a, 9b, 214 .66 1.50 2.20 3.20 4.60 9.00 19.00 28.00 47.00 11, 11a, 12, 12a, 13, 13a, 216 .66 1.50 2.20 3.20 4.60 9.00 19.00 28.00 217 .41 1.00 1.40 2.10 3.10 5.80 13.00 19.00 31.00 22, 22b 1.20 2.80 4.20 6.30 9.50 55, 55a, 55b, 223 1.35 3.00 4.30 6.00 8.80 16.50 36.00 51.00 85.00 58, 58b 1.20 3.10 4.60 7.00 10.00 17.50 38.00 58a, 58c 1.40 3.30 4.90 7.30 11.00 20.00 41.00 59, 59a, 59b 1.10 2.30 3.30 4.70 6.70 11.50 25.50 41.00 62, 62a, 71, 71a, 71b .90 1.90 2.80 3.70 5.20 8.50 18.40 29.50 62b .90 2.10 3.00 4.30 6.10 10.50 23.50 36.00 115, 115a, 165, 225, 393 .60 1.40 2.10 3.10 4.50 7.50 14.00 21.00 35.00 108, 108a 2.30 5.20 7.50 11.00 16.00 26.20 54.00 122 1.60 4.40 6.90 11.00 16.60 29.20 57.20 89.00 140, 141, 141a, 142, 142b, 302, 303, 400, 402 1.20 2.70 3.90 5.50 8.00 13.00 26.00 36.00 62.00 143, 143a .85 1.80 2.50 3.80 5.70 9.70 18.10 26.10 40.70 144 .38 1.00 1.60 2.30 3.80 7.00 15.10 161, 179, 179a, 179b, 187, 187a 5.00 7.90 9.80 12.70 15.80 25.00 43.00 62.50 135.00 174, 174a 3.80 6.50 8.90 12.00 17.50 31.00 64.30 97.00 185.00 178, 178a, 178b, 196, 196a 5.30 10.00 13.30 20.00 27.50 45.00 78.00 115.00 172.00 180, 180a, 180b, 195, 195a 3.10 4.20 5.10 7.30 10.40 16.50 36.00 49.50 89.00 188, 188a, 316 3.80 7.90 11.50 15.00 20.00 30.00 58.00 79.00 133.00 210 .23 .58 .85 1.30 1.90 3.10 6.50 9.00 15.00 note: v alues above 3 ghz vary considerably depending on construction. conditions ambient: 20?
appendix g - glossary of terms a ambient the atmospheric conditions surrounding a given item. normally in terms of factors which influence or modify, such as temperature, humidity, etc. amplitude the magnitude of variation in a changing quantity from its zero value. the word requires modification - as with adjectives such as peak, maximum, rms, etc. - to designate the specific amplitude in question. arc voltage voltage that continues to pass through a surge protector dur- ing activation of gdt(approx. 20 volts ) attenuation a reduction in power. it occurs naturally during wave travel through lines, waveguides, space or a medium such as water. it may be pro- duced intentionally by placing an attenuator in a circuit. the amount of attenuation is generally expressed in decibels per unit of length. b back mounted a connector attached to the inside of a panel or box with its mounting flanges inside the equipment. bayonet coupling a quick coupling device for plug and receptacle con- nectors. pins projecting from the outside of the cylindrical receptacle engage with corresponding cam slots in the bayonet plug. bellmouth flared at the mouth. the rear of a properly crimped wire barrel will have a slight flare (bellmouth) to relieve the strain on the wire strands as they leave the area of high compression and take their natural ?ay? a bellmouth condition may also be present in front of the wire barrel. black box a term used to refer to any assembly or subassembly, usually electronic, that can readily be installed or removed from a larger system. bnc connector a radio frequency connector covered by military specification. it has an impedance of 50 or 75 ohms, and is designed to operate in the 0 to 4 ghz frequency range. it features quick connect/discon- nect by pin and cam bayonet coupling. body main or largest portion of a connector to which other portions are attached. braid a weave of metal fibers used as a shield covering for an insulated conductor or group of insulated conductors. when flattened it may be used as a grounding strap. broad-band e interference generated over a wide range of frequencies (e.g., automotive ignition noise). bulkhead a term used to define a mounting style of connectors. bulkhead connectors are designed to be inserted into a panel cutout from the rear (component side) of the panel. c cable either a standard conductor, with or without insulation and other coverings, or a combination of conductors insulated from each other. cable assembly a completed cable and its associated hardware. capacitance the property of an electrical conductor (dielectric in a capacitor) that permits the storage of energy as a result of electrical dis- placement. the basic unit of capacitance is the farad, however, measure- ment is more commonly in microfarads or picofarads. cavity a metallic enclosure in some types of tubes and circuits within which resonant fields may be excited at the microwave frequency to which the cavity is tuned. usually referred to as resonant cavity. see also: contact cavity. characteristic impedance the ratio of voltage to current at any point along a transmission line on which there are no standing waves. circular mil area (cma) a unit of area equal to the area of a circle whose diameter is 1 mil (0.001 inch). used chiefly in specifying cross- sectional areas of conductors. (see tyco electronics brochure no. 4402-8, computing circular mil area for tyco electronics terminals and splices). closed entry contact a female contact designed to prevent the entry of a pin or probing device having a cross-sectional dimension (diameter) greater than the mating pin. coaxial cable a transmission line consisting of two conductors concen- tric with and insulated from each other. in its flexible form it consists of either a solid or stranded center conductor surrounded by a dielectric. a braid is then woven over the dielectric to form an outer conductor. a weath- erproof plastic covering, usually vinyl, is placed on top of the braid. connector a coupling device employed to connect conductors to one cir- cuit with those of another circuit. used to provide rapid connect/disconnect mating with pc boards, posts or another connector. connector assembly includes housing and contact plus additional com- ponents such as hardware used to hold the assembly together and/or make the assembly a functional connector. contact an electrically conductive component designed for use in a multi- circuit connector. contact cavity a defined hole in the connector insert or housing into which the contact must fit. see also: cavity. contact durability the number of insertion and withdrawal cycles that a connector must be capable of withstanding while remaining within the per- formance levels of the applicable specification. contact engaging and separating force force required to either engage or separate contacts. values are generally established for maximum and minimum forces. contact inspection hole a hole, perpendicular to the cylindrical rear portion of screw machined contacts, used to check the depth to which wire has been inserted into the barrel. contact resistance measurement of electrical resistance of mated con- tacts when assembled in a connector under typical service use. electrical resistance is determined by measuring from the rear of the electrical area of one contact to the rear of the contact area of the mating contact (excluding both crimps) while carrying a specified test current. contact shoulder the flanged or enlarged portion of a contact that pre- vents it from being over-inserted into the appropriate contact cavity. the shoulder may also contribute to proper orientation and stability with the connector housing. contact, two-piece a contact made of two separate parts joined by swedging, brazing or other means of fastening to form a single contact. while this provides the mechanical advantages of two metals, it also has the inherent electrical disadvantage of difference in conductivity. corona a discharge of electricity appearing as a bluish-purple glow on the surface of, and adjacent to, a conductor when the voltage gradient exceeds a certain critical value. it is caused by the ionization of surrounding air by high voltage. crimp the final configuration of a terminal barrel after the necessary com- pression forces have been applied to cause a functional union between the terminal barrel and the wire. crimp height a top to bottom measurement of the crimped barrel, using a crimp height comparator in the prescribed manner. (refer to t yco electronics instruction sheet 7424). crimping dies a term used to identify the shaping tools that, when moved toward each other, produce a certain desirable shape to the barrel of the terminal or contact that has been placed between them. crimping dies are often referred to as die sets or as die inserts. 301 catalog 1307191 dimensions are in millimeters dimensions are shown for usa: 1-800-522-6752 south america: 55-11-2103-6000 revised 3-07 and inches unless otherwise reference purposes only. canada: 1-905-470-4425 hong kong: 852-2735-1628 specified. values in brackets specifications subject mexico: 01-800-733-8926 japan: 81-44-844-8013 www.tycoelectronics.com are standard equivalents. to change. c. america: 52-55-1106-0803 uk: 44-8706-080-208 rf coax connectors
302 catalog 1307191 dimensions are in millimeters dimensions are shown for usa: 1-800-522-6752 south america: 55-11-2103-6000 revised 3-07 and inches unless otherwise reference purposes only. canada: 1-905-470-4425 hong kong: 852-2735-1628 specified. values in brackets specifications subject mexico: 01-800-733-8926 japan: 81-44-844-8013 www.tycoelectronics.com are standard equivalents. to change. c. america: 52-55-1106-0803 uk: 44-8706-080-208 rf coax connectors appendix g - glossary of terms (continued) crimping head t ooling containing jaws and linkage for use in pneumatic or hydraulic powered units to crimp loose-piece contacts/terminals that may be too large for hand tool applications. crimping tool a term commonly used to identify a hand held mechanical device that is used to crimp a contact, terminal or splice. crosstalk a magnetic or electrostatic coupling which causes the unwanted transfer of energy from one circuit (disturbing circuit) to another circuit (disturbed circuit) current rating the maximum continuous electrical flow of current recom- mended for a given situation. it is expressed in amperes. cycle one complete sequence of values of an alternating quantity, includ- ing a rise to maximum in one direction and return to zero; a rise to maxi- mum in the opposite direction and return to zero. the number of cycles occurring in one second is called the frequency. d daisy chain a cable assembly with common wires jumpering three or more connections/connectors. the term is also used as a verb, implying to connect in jumper manner. db abbreviation see decibel. d.c. sparkover voltage defined as the maximum voltage across a device before it discharges the energy to ground when subjected to a slowly rising voltage ramp. a rate of rise of 100v/s is usually chosen for testing purposes. decibel a unit expressing the ratio of two voltages, currents or powers. it is equal to 20 times the common logarithm of the ratio of two voltages across or two currents through equal loads, or 10 times the common loga- rithm of the two powers. one decibel is approximately the smallest change in audible power that can be recognized by the human ear. die closure t erm used to designate a crimping area (crimping chamber) when the dies are fully closed or bottomed. die closure is checked with go/no go plug gage to insure that the crimp produced by the tooling satis- fies the crimp height specification. dielectric a material that serves as an insulator. the amount of resistance to voltage in a given insulation. dielectric withstanding voltage the maximum potential gradient that a dielectric material can withstand without failure. discontinuity rated interconnection: a broken connection (open circuit) or the loss of a specified connection characteristic. transient phenomena: short term (temporary) interruption or unacceptable variation in current or voltage. dissipation unusable or lost energy, such as the production of unused heat in a circuit. distortion an unwanted change or addition to a signal or waveform when it is amplified. this definition excludes noise which is an extraneous signal superimposed on the desired signal. dummy load a dissipative device used at the end of a transmission line or waveguide to convert transmitted energy into heat, so essentially no energy is radiated outward or reflected back to its source. dust cap a device attached to a connector to provide protection against dust and foreign debris. e electromagnetic compatibility (emc) the ability of an electronic device to operate in its intended environment without its performance being affected by emi and without generating emi that will affect other equipment. electromagnetic interference (emi) unwanted electrical or electro- magnetic energy that causes undesirable responses, degrading performance or complete malfunctions in electronic equipment. see also: noise. electromotive force (emf) see voltage. environmentally sealed a unit is provided with gaskets, seals, grom- mets, potting or other means to keep out moisture, dust, air or dirt which might reduce or impair its performance. f feedthrough a connector or terminal block, usually having double-ended terminals, which permits distribution and bussing of electrical circuits. also used to describe a bushing in a wall or bulkhead, separating compartments at different pressure levels, with terminations on both sides. ferrule a short tube used to make solderless connections to shielded or coaxial cable. also molded into the plastic inserts of multiple contact con- nectors to provide strong, wear-resistant shoulders on which contact retain- ing springs can bear. flange a projection extending from or around the periphery of a connector and having holes that provide for mounting the connector to a panel or to a mating connector. frequency modulation (fm) a scheme for modulating a carrier fre- quency in which the amplitude remains constant but the carrier frequency is displaced in frequency proportionally to the amplitude of the modulating signal. an fm broadcast is practically immune to atmospheric and man- made interference. fretting corrosion a form of excellerated oxidation that appears at the interface of contacting materials undergoing slight cyclic relative motion. all non-nobel metals (tin) are susceptible to some degree of fretting corrosion and will suffer contact resistance increases. front mounted a connector is said to be front mounted when it is attached to the outside of the mating side of a panel. a front mounted con- nector can only be installed or removed from the outside of the equipment. g gas discharge tube (gdt) hermetically sealed device containing an inert gas. ghz see gigahertz. giga a prefix meaning one billion (10 9 ). gigahertz (ghz) one billion cycles per second (10 9 cps). glow mode condition in which the gdt continues to conduct after an impulse passed. characterized by a visible glow in the device caused by over-heating. ground a connection, intentional or accidental, between an electrical circuit and the earth or some conducting body (e.g. chassis) serving in place of earth. h heat-shrinkable a type of plastic material that has been cross-linked. a term describing tubes, sleeves, caps, boots, films or other forms of plastic which shrink to encapsulate, protect or insulate connections, splices, termi- nations and other configurations. hermetic airtight, impervious to external influence, as in a hermetic pack- age. often used to describe metal-to-metal solder or weld-sealed packages.
appendix g - glossary of terms (continued) hermetic seal hermetically sealed connectors are usually multiple contact connectors where the contacts are bonded to the connector by glass or other materials and permits maximum leakage rate of gas through the connector of 1.0 micron ft./hr. at one atmosphere pressure for special applications. hertz (hz) international standard term for cycles per second. named after the german physicist heinrich r. hertz (e.g., 60 cycles per second is equal to 60 hertz or 60 hz). i impedance (z) the total opposition offered by a component or circuit to the flow of alternating or varying current. impedance is expressed in ohms and is similar to the actual resistance in a direct current circuit. in computa- tions, impedance is handled as a complex ratio of voltage to current. impedance match a condition in which the impedance of a component or circuit is equal to the internal impedance of the source, or the surge impedance of a transmission line. this gives maximum transfer of energy from the source to the load, as well as minimum reflection and distortion. impulse discharge current is defined as the peak current of an impulse which the device can with- stand ten times (5 of each polarity at fixed time intervals) without sub- stantially affecting device perform- ance. the test normally used to determine this capacity uses the 8/20ms waveform as depicted below where t1=8ms and t2=20ms. impulse sparkover voltage defined as the maximum level of voltage across a device before it discharges the energy to ground when subjected to a voltage impulse. the three common waveform profiles used to determine this capacity are: inductance one cause of reactance. an electromagnetic phenomenon in which the expanding and collapsing of a magnetic field surrounding a con- ductor or device tends to impede changes in current. the effects of induc- tance become greater as frequencies increase. the basic unit for inductance is the henry. input impedance the impedance that exists between the input terminals of an amplifier or transmission line when the source is disconnected. the circuit, signal level and frequency must be specified. insertion loss the loss in load power due to the insertion of a compo- nent, connector or device at some point in a transmission system. generally expressed in decibels as the ratio of the power received at the load before insertion of the apparatus, to the power received at the load after insertion. insulation crimp the area of a terminal splice or contact that has been formed around the insulation of a wire. insulation grip the ability of certain crimped terminals to hold firmly in place both the conductor and a small portion of insulation. this prevents the conductor from being exposed due to insulation receding away from the terminal. insulation resistance the electrical resistance between two conductors separated by an insulating material. interface the two surfaces of a multiple-contact connector that face each other when the connector is assembled. interference an electrical or electromagnetic disturbance that causes undesirable response in electronic equipment. j jack a connecting device into which a plug can be inserted to make circuit connections. the jack may also have contacts which open or close to per- form switching functions when the plug is inserted or removed. see also: receptacle. l line impedance impedance as measured across the terminals of a trans- mission line; frequently the characteristic impedance of the line. m matched impedance the coupling of two circuits in such a way that the impedance of one circuit equals the impedance of the other. mate t wo join two connectors in a normal engaging mode. maximum discharge current defined as the peak current of an impulse which the device can withstand once without substantially affecting device performance. mega (m) a prefix meaning one million (10 6 ). microwave that portion of the electromagnetic spectrum lying between the far infrared and conventional radio frequency range. the microwave fre- quency range extends from 1 ghz to 300 ghz. microwaves are usually used in point-to-point communications because they are easily concentrated into a beam. military specification military requirements. the demand imposed upon a system to meet a military operational need. mismatch the condition in which the impedance of a source does not match or equal the impedance of the connected load. this reduces power transfer by causing reflection. n narrow-band emi generated from a device operating at a specific and limited range of frequencies. see also: electromagnetic interference (emi). n connector a large radio frequency connector covered by military specification. it has an impedance of 50 ohms and is designed to operate in the 0 to 11 ghz frequency range. it has a threaded coupling and is physi- cally larger than a tnc connector. noise an extraneous signal in an electrical circuit, capable of interfering with the desired signal. classes of noise include burst of popcorn noise, intermediate frequency noise at low audio frequencies, white (thermal) noise, etc. signals from power supply or ground line coupled into an ampli- fier output may be considered noise. o ??crimp an insulation support crimp for open barrel terminals and contacts. in its crimped form it resembles an ??and conforms to the shape of the round wire insulation. ??crimp is also used to describe the circum- ferential crimps used on coaxicon ferrules. 0 1 t 2 t 1 = 1.25t t t t 1 a b 0 i 1- 0 0-1 0-5 0-9 t 2 t 2 =1.67t t t l 0 1 t a t 8 0 0.3 0.5 0.9 1.0 v 303 catalog 1307191 dimensions are in millimeters dimensions are shown for usa: 1-800-522-6752 south america: 55-11-2103-6000 revised 3-07 and inches unless otherwise reference purposes only. canada: 1-905-470-4425 hong kong: 852-2735-1628 specified. values in brackets specifications subject mexico: 01-800-733-8926 japan: 81-44-844-8013 www.tycoelectronics.com are standard equivalents. to change. c. america: 52-55-1106-0803 uk: 44-8706-080-208 rf coax connectors
304 catalog 1307191 dimensions are in millimeters dimensions are shown for usa: 1-800-522-6752 south america: 55-11-2103-6000 revised 3-07 and inches unless otherwise reference purposes only. canada: 1-905-470-4425 hong kong: 852-2735-1628 specified. values in brackets specifications subject mexico: 01-800-733-8926 japan: 81-44-844-8013 www.tycoelectronics.com are standard equivalents. to change. c. america: 52-55-1106-0803 uk: 44-8706-080-208 rf coax connectors appendix g - glossary of terms (continued) ohm the unit of measurement for electrical resistance. a circuit is said to have a resistance of one ohm when an applied emf of one volt causes a cur- rent of one ampere to flow. p panel mount a method of fixing a connector to a board, panel or frame. the mounted connector is usually the receptacle or female connector. the plug or male connector is usually the removable portion. pcb abbreviation: see printed circuit board. permeability (chemical) the passage or diffusion (or rate of passage) of a gas, vapor, liquid or solid through a barrier without physically or chem- ically affecting it. permeability (magnetic) the measure of how much better a material is than air as a path for magnetic lines of force. air is assumed to have a per- meability of 1. plug in coaxial rf connectors the plug is usually the movable portion, and is usually attached to a cable or removable assembly. plugs mate with receptacles, jacks, outlets, etc. printed circuit board an insulating board serving as a base for a printed circuit. when the printing process is completed, the board may include printed components, as well as printed wiring. propagation delay t ime required for an electronic digital device, or transmission network to transfer information from its input to its output. propagation delay time the time between the application of a digital input waveform and the corresponding change in input waveform. it is measured between reference points on the waveforms. the time is generally different for positive-going and negative-going waveforms. prototype a model suitable for use in the complete evaluation of form, design and performance. pulse a change in the level, over a relatively short period of time, of a sig- nal whose value is normally constant. pulse width the length of time that the pulse voltage is at the transient level. electronic pulse widths are usually in the millisecond (10 -3 ), microsecond (10 -6 ) or nanosecond (10 -9 ) range. r receptacle in coaxial rf connectors, the receptacle is usually the fixed or stationary portion that is mounted to the panel. in shell-type, multiple- contact connectors the receptacle usually contains the pin contacts and is mounted on the ?old?side of a circuit such as in a drawer or black box. receptacles mate with plugs. see also: jack. residual impulse defined as the voltage that will pass through the device prior to activation of the gdt. residual voltage defined as the small amount of voltage left on the line after an impulse passes. resonance a frequency at which captive reactance and inductive reactance are equal and therefore cancel one anothers effects. rf abbreviation for radio frequency. rg/u symbol used to designate coaxial cables that are made to government specification (e.g., rg 58u; in this designation the ??means radio frequency, the ??means government, the ?8?is the number assigned to the government approval, and the ??means it is a universal specification). rise time the time required for a component or logic circuit to change from the quiescent to the transient state when an input is applied. (i.e. elapsed time between application of input and attainment of full output level). rms abbreviation for root mean square. root mean square the effective value of an alternating current, corre- sponding to the direct current value that will produce the same heating effect. s screw machine contact a contact which is machined from solid bar stock. semi-rigid a cable containing a flexible inner core and a relatively inflexi- ble sheathing. sheath the outer covering of a jacket over the insulated conductors to provide mechanical protection for the conductors. also known as the exter- nal conduction surface of a shielded transmission line. shield/shielding (cable) a conducting envelope, composed of metal strands, which enclose a wire, group of wires or cable so constructed that substantially every point on the surface of the underlying insulation is at ground potential or at some predetermined potential with respect to ground. shield/shielding (circuit) the metal sleeving surrounding one or more of the conductors in a wire circuit to prevent interference, interaction or cur- rent leakage. shielding protects a circuit against crosstalk. shock (mechanical) (1) an abrupt impact applied to a stationary object. (2) an abrupt or nonperiodic change in position, characterized by sudden- ness, and by the development of substantial internal forces. shv abbreviation for standard high voltage. sine wave a wave which can be expressed as the sine of a linear function of time, space or both. a waveform, often viewed on an oscilloscope, of a pure alternating current or voltage. skin effect the tendency of alternating currents to flow near the surface of the conductor, thus being restricted to a small part of the total cross-sec- tional area. this effect increases the resistance and becomes more marked as the frequency rises. sleeve the insulated or metallic covering over the barrel of a terminal. solder contact a contact or terminal having a cup, hollow cylinder, eyelet or hook to accept a wire for a conventional soldered termination. standard high voltage (shv) a quick connect/disconnect connector series employing a bayonet lock coupling and designated to operate safely up to 5000 volts ac. it is the industry standard connector specified by the national bureau of standards (nbs) for high voltage use by the atomic energy commission (aec). standing-wave distribution of current and voltage on a transmission line, resulting from two sets of waves traveling in opposite directions. standing wave ratio the ratio between maximum and minimum current or voltage along a line. it is a measure of the mismatch between the load and the line. it is equal to 1 when the line impedance is perfectly matched to the load. (in which case the maximum and minimum are the same, as cur- rent and voltage do not vary along the line). the perfect match would be a 1 to 1 ratio. super high frequency (shf) the federal communications commission designation for the band from 3,000 to 30,000 mhz in the radio spectrum. t tensile the amount of axial load (longitudinal stress) required to break or pull the wire from the crimped barrel of the terminal, splice or contact.
appendix g - glossary of terms (continued) tensile strength the greatest longitudinal stress that a substance or union can bear without tearing or pulling apart. in crimped terminations, it is the greatest longitudinal stress that a terminal can bear without the wire separating from the terminal. thermal shock the effect of heat or cold applied at such a rate that nonuniform thermal expansion or contraction occurs within a given material or combination materials. the effect can cause inserts and other insulation materials to pull away from metal parts. time-delay a circuit that delays the transmission of an impulse for a defi- nite and desired period of time. tnc connector a radio frequency connector covered by military specification. it has an impedance of 50 ohms and is designed to operate in a 0 to 11 ghz frequency range. reliability is assured by a threaded coupling that can be safely wired to prevent accidental disconnect. u ug symbol used to describe coaxial connectors that were made to a government specification. this specification is now obsolete. ultra-high frequency (uhf) a federal communications commission designation for the band from 300 to 3000 mhz on the radio spectrum. in television - channels 14 to 83 or 470 to 890 mhz. v very high frequency (vhf) a federal communications commission designation for the band from 30 to 300 mhz on the radio spectrum. voice-frequency (vf) any frequency within that part of the radio fre- quency range essential to speech transmission of a commercial quality (i.e., 300 to 3400 hz). also referred to as telephone frequency. volt (v) the unit of measurement for electromotive force (emf). it is equiva- lent to the force required to produce 1 ampere through a resistance of 1 ohm. voltage (e) the term most often used to designate electrical pressure that exists between two points and is capable of producing a flow of current when a closed circuit is connected between the two points. voltage is meas- ured in volts, millivolts, microvolts and kilovolts. the terms electromotive force (emf), potential, potential difference and voltage drop are often referred to as voltage. voltage drop the voltage developed across a component or conductor by the flow of current through the resistance or impedance of that component or conductor. voltage hold over refers to the maximum line voltage at which recovery of the gdt to its inactive state will take place within a specified period of time (normally 150ms) after an induced lightning pulse (normally 10/1000ms) has been applied. vswr abbreviation for voltage standing wave ratio. also see: standing wave ratio. w wavelength the distance between two points which are in phase on adja- cent waves. it is the distance traveled by the wave in the same span of one cycle. electromagnetic waves (both light and radio) have a speed in space of about 300,000,000 meters (186,000 miles) per second. thus wavelength in meters is equal to 300,000,000 divided by frequency. z z letter symbol used to represent impedance in ohms. 305 catalog 1307191 dimensions are in millimeters dimensions are shown for usa: 1-800-522-6752 south america: 55-11-2103-6000 revised 3-07 and inches unless otherwise reference purposes only. canada: 1-905-470-4425 hong kong: 852-2735-1628 specified. values in brackets specifications subject mexico: 01-800-733-8926 japan: 81-44-844-8013 www.tycoelectronics.com are standard equivalents. to change. c. america: 52-55-1106-0803 uk: 44-8706-080-208 rf coax connectors
306 catalog 1307191 dimensions are in millimeters dimensions are shown for usa: 1-800-522-6752 south america: 55-11-2103-6000 revised 3-07 and inches unless otherwise reference purposes only. canada: 1-905-470-4425 hong kong: 852-2735-1628 specified. values in brackets specifications subject mexico: 01-800-733-8926 japan: 81-44-844-8013 www.tycoelectronics.com are standard equivalents. to change. c. america: 52-55-1106-0803 uk: 44-8706-080-208 rf coax connectors rf coaxial solutions for communications equipment wireless base station carrier rack equipment chassis nic card set top box
wireless base station 7-16 series connectors, page 7 lightning protection connectors, page 12 7-16 series cable assemblies, page 269 n series cable assemblies, page 269 mcx connectors, page 196 ssmt connectors, page 212 smp subminiature blindmate connectors, page 152 din inserts, page 238 coaxicon contacts, page 244 siemax connectors, page 249 n series connectors, page 20 tnc connectors, page 29 sma connectors page 100 smb connectors page 176 radio base station cabinets demand packaging that combines high power r.f. signals, high speed digital data, and analog signals. cabinet input/output con- nections are provided by n series and 7/16 connectors. plug-in r.f. modules require blindmate, din inserts, and panel mount connectors. t ransceiver modules utilize mcx, and ssmt board and cable connectors for board to board and panel to board applications. finally, both semi-rigid and flexible rg cable assemblies route signals throughout the entire cabinet. 307 catalog 1307191 dimensions are in millimeters dimensions are shown for usa: 1-800-522-6752 south america: 55-11-2103-6000 revised 3-07 and inches unless otherwise reference purposes only. canada: 1-905-470-4425 hong kong: 852-2735-1628 specified. values in brackets specifications subject mexico: 01-800-733-8926 japan: 81-44-844-8013 www.tycoelectronics.com are standard equivalents. to change. c. america: 52-55-1106-0803 uk: 44-8706-080-208 rf coax connectors
308 catalog 1307191 dimensions are in millimeters dimensions are shown for usa: 1-800-522-6752 south america: 55-11-2103-6000 revised 3-07 and inches unless otherwise reference purposes only. canada: 1-905-470-4425 hong kong: 852-2735-1628 specified. values in brackets specifications subject mexico: 01-800-733-8926 japan: 81-44-844-8013 www.tycoelectronics.com are standard equivalents. to change. c. america: 52-55-1106-0803 uk: 44-8706-080-208 rf coax connectors carrier rack equipment g series connectors, page 98 f series connectors, page 93 mmcx connectors, page 218 bnc connectors, page 44 sma connectors, page 100 smb connectors, page 176 tnc connectors, page 29 din inserts, page 238 siemax connectors, page 249 for todays fast paced carrier equipment market, t yco electronics offers a broad line of rf intercon- nect products that meet demanding customer r equirements for catv, tele- com and data transmission applications. connectors, cable assemblies, and applicator tooling are avail- able for applications rang- ing from central office to customer premise environ- ments, 50 or 75 ohms, from rack based equipment to set top boxes. styles range from standard miniature rf connectors such as f series, bnc and tnc to subminiature rf connectors such as sma, smb, smc and blindmate connectors, to micro miniature mmcx, ssmt and smt/quickgrip products. siemax connec- tors provide multi-positional surface mount technology rf connection for pcb and panel applications, and offer superior packaging density. between series adapters are available, along with connectors meeting international din and iec standard inter- faces. high performance ghz range bnc connectors meet the needs for faster signaling.
chassis, nic card and set top box coaxial interconnects have evolved in the enterprise market place over the years. the bnc interfaces that once dominated the ethernet premise installa- tions to coax products that provide high speed access to the carrier infrastructure. in todays environment, network interface cards (nic) still feature capacitively decoupled bnc connectors with built- in chip capacitors to reduce noise and ground loop currents. for the infrastructure, the standard coaxial interfaces to the infrastructure include both 50 and 75 ohm bnc connectors. the bnc fam- ily features numerous styles including cable plugs and jacks, adapters and printed circuit board connectors. to address manufacturabil- ity, we offer the board mount in smt, wave solder, and press fit. more recently, the smb interface is the one of choice for improved density and is available in both commercial and mil-type. again, our portfolio has a wide variety of configura- tions to address your sys- tem requirements. lastly, as broadband catv becomes more prevalent for internet access in cable modems, our family of f connectors offer a high performance solution. bnc connectors, page 44 smb connectors, page 176 f connectors, page 93 decoupled bnc, page 82 nic card chassis set top box 309 catalog 1307191 dimensions are in millimeters dimensions are shown for usa: 1-800-522-6752 south america: 55-11-2103-6000 revised 3-07 and inches unless otherwise reference purposes only. canada: 1-905-470-4425 hong kong: 852-2735-1628 specified. values in brackets specifications subject mexico: 01-800-733-8926 japan: 81-44-844-8013 www.tycoelectronics.com are standard equivalents. to change. c. america: 52-55-1106-0803 uk: 44-8706-080-208 rf coax connectors
310 catalog 1307191 dimensions are in millimeters dimensions are shown for usa: 1-800-522-6752 south america: 55-11-2103-6000 revised 3-07 and inches unless otherwise reference purposes only. canada: 1-905-470-4425 hong kong: 852-2735-1628 specified. values in brackets specifications subject mexico: 01-800-733-8926 japan: 81-44-844-8013 www.tycoelectronics.com are standard equivalents. to change. c. america: 52-55-1106-0803 uk: 44-8706-080-208 222092-1 5222092-1 222092-3 5222092-3 222093-1 5222093-1 222117-1 5222117-1 222132-1 5222132-1 222165-2 5222165-2 222420-1 5222420-1 222462-1 5222462-1 222506-1 5222506-1 222506-5 5222506-5 222506-6 5222506-6 225089-4 5225089-4 225092-8 5225092-8 225349-9 5225349-9 225361-2 5225361-2 225361-4 5225361-4 1-225361-2 1-5225661-2 225363-1 5225363-1 225392-2 5225392-2 225395-1 5225395-1 225395-2 5225395-2 225395-3 5225395-3 225395-6 5225395-6 225395-7 5225395-7 225395-8 5225395-8 1-225395-0 1-5225395-0 2-225395-0 2-5225395-0 4-225395-1 4-5225395-1 4-225395-2 4-5225395-2 225396-1 5225396-1 225396-2 5225396-2 225396-7 5225396-7 225397-1 5225397-1 225397-2 5225397-2 225397-7 5225397-7 225398-1 5225398-1 225398-3 5225398-3 225398-6 5225398-6 225398-7 5225398-7 225398-8 5225398-8 1-225398-5 1-5225398-5 225554-6 5225554-6 1-225554-1 1-5225554-1 225555-2 5225555-2 225555-6 5225555-6 225555-7 5225555-7 225555-8 5225555-8 225557-6 5225557-6 225559-2 5225559-2 225559-8 5225559-8 225661-1 5225661-1 225661-2 5225661-2 1-225661-3 1-5225661-3 1-225661-6 1-5225661-6 225662-2 5225662-2 1-225662-8 1-5225662-8 225664-1 5225664-1 225664-2 5225664-2 1-225664-2 1-5225664-2 1-225667-6 1-5225667-6 225669-1 5225669-1 non-rohs rohs compliant part no. part no. 13126-1 exempt 13127-1 exempt 59980-1 exempt 69477-1 exempt 69710-1 exempt 148385-1 5148385-1 148386-1 5148386-1 189721-1 exempt 220015-1 exempt 220220-2 exempt 220221-2 exempt 220222-2 exempt 220224-1 exempt 221111-1 5221111-1 221123-2 5221123-2 221128-1 5221128-1 1-221128-0 1-5221128-0 1-221128-1 1-5221128-1 1-221128-7 1-5221128-7 2-221128-1 2-5221128-1 2-221128-3 2-5221128-3 2-221128-7 2-5221128-7 3-221128-1 3-5221128-1 221162-1 5221162-1 221185-1 5221185-1 221185-2 5221185-2 221185-3 5221185-3 221185-5 5221185-5 221185-7 5221185-7 221185-8 5221185-8 221185-9 5221185-9 1-221185-0 1-5221185-0 1-221185-8 1-5221185-8 2-221185-9 2-5221185-9 3-221185-1 3-5221185-1 221198-1 5221198-1 221199-1 5221199-1 221199-2 5221199-2 221199-5 5221199-5 221221-1 5221221-1 221221-2 5221221-2 221221-5 5221221-5 221221-7 5221221-7 221244-1 5221244-1 221325-1 5221325-1 221336-3 5221336-3 221336-4 5221336-4 221402-2 5221402-2 221402-4 5221402-4 221506-2 5221506-2 221506-3 5221506-3 221506-5 5221506-5 221629-1 5221629-1 221629-2 5221629-2 221629-4 5221629-4 221629-5 5221629-5 221629-6 5221629-6 1-221629-6 1-5221629-6 221980-1 5221980-1 221981-2 5221981-2 222006-1 5222006-1 non-rohs rohs compliant part no. part no. 225669-2 5225669-2 225699-1 5225699-1 225886-1 5225886-1 225886-4 5225886-4 225886-5 5225886-5 225886-7 5225886-7 225974-1 5225974-1 225974-2 5225974-2 225974-5 5225974-5 226978-1 5226978-1 226978-3 5226978-3 226990-1 5226990-1 226990-3 5226990-3 226990-6 5226990-6 226993-1 5226993-1 226993-2 5226993-2 226993-3 5226993-3 226993-6 5226993-6 227079-5 5227079-5 227079-6 5227079-6 227079-7 5227079-7 1-227079-1 1-5227079-1 1-227079-6 1-5227079-6 1-227079-9 1-5227079-9 2-227079-2 2-5227079-2 4-227079-3 4-5227079-3 5-227079-3 5-5227079-3 6-227079-1 6-5227079-1 6-227079-7 6-5227079-7 6-227079-8 6-5227079-8 8-227079-2 8-5227079-2 1-227086-0 1-5227086-0 227161-1 5227161-1 227161-2 5227161-2 227161-3 5227161-3 227161-6 5227161-6 227161-7 5227161-7 227161-9 5227161-9 227169-5 5227169-5 227169-7 5227169-7 227169-8 5227169-8 227222-1 5227222-1 227222-2 5227222-2 227222-3 5227222-3 227222-6 5227222-6 227426-1 5227426-1 227661-1 5227661-1 227671-1 5227671-1 227673-1 5227673-1 227676-1 5227676-1 227677-1 5227677-1 227699-1 5227699-1 227699-2 5227699-2 227699-3 5227699-3 227716-3 5227716-3 227726-1 5227726-1 227726-2 5227726-2 227726-3 5227726-3 227755-1 5227755-1 227755-2 5227755-2 227755-3 5227755-3 non-rohs rohs compliant part no. part no. 227764-2 5227764-2 227818-1 5227818-1 227820-1 5227820-1 227839-1 5227839-1 228217-1 5228217-1 228226-1 5228226-1 228226-3 5228226-3 228435-1 5228435-1 228596-1 5228596-1 228596-2 5228596-2 228596-3 5228596-3 228596-4 5228596-4 228596-5 5228596-5 228618-1 5228618-1 228618-2 5228618-2 228618-3 5228618-3 228618-4 5228618-4 228618-5 5228618-5 228686-1 5228686-1 228979-5 5228979-5 228979-6 5228979-6 228979-7 5228979-7 228980-5 5228980-5 228980-6 5228980-6 228980-7 5228980-7 307581-1 exempt 311386-1 exempt 311386-2 exempt 311386-3 exempt 311392-1 exempt 311395-1 exempt 311396-1 exempt 312067-1 exempt 312253-1 exempt 312253-2 exempt 312317-1 exempt 2-329444-1 2-5329444-1 2-329444-2 2-5329444-2 2-329445-1 2-5329445-1 2-329446-1 2-5329446-1 2-329452-2 2-5329452-2 2-329456-1 2-5329456-1 2-329458-1 2-5329458-1 329517 5329517 2-330061-1 2-5330061-1 2-330062-1 2-5330062-1 2-330063-1 2-5330063-1 2-330358-2 2-5330358-2 330876 5330876 330878 5330878 331175 5331175 331178 5331178 331182 5331182 331238 5331238 332215 5332215 332225-3 5332225-3 332225-5 5332225-5 332225-6 5332225-6 332225 5332225 332342 5332342 413194-1 5413194-1 non-rohs rohs compliant part no. part no. rf coax connectors non-rohs to rohs compliant part number cross reference
311 catalog 1307191 dimensions are in millimeters dimensions are shown for usa: 1-800-522-6752 south america: 55-11-2103-6000 revised 3-07 and inches unless otherwise reference purposes only. canada: 1-905-470-4425 hong kong: 852-2735-1628 specified. values in brackets specifications subject mexico: 01-800-733-8926 japan: 81-44-844-8013 www.tycoelectronics.com are standard equivalents. to change. c. america: 52-55-1106-0803 uk: 44-8706-080-208 non-rohs to rohs compliant part number cross reference (continued) 413194-2 5413194-2 413311-1 5414311-1 413364-2 5413364-2 413366-2 5413366-2 413476-2 5413476-2 413506-1 5413506-1 413515-2 5413515-2 413515-3 5413515-3 413515-7 5413515-7 413515-8 5413515-8 413515-9 5413515-9 413524-2 5413524-2 413524-5 5413524-5 413557-1 5413557-1 413557-2 5413557-2 413558-1 5413558-1 413558-2 5413558-2 413558-3 5413558-3 413558-5 5413558-5 413588-2 5413588-2 413588-4 5413588-4 413588-8 5413588-8 413588-9 5413588-9 1-413588-0 1-5413588-0 413589-1 5413589-1 413589-2 5413589-2 413589-3 5413589-3 413589-5 5413589-5 413589-7 5413589-7 413589-8 5413589-8 413589-9 5413589-9 1-413589-0 1-5413589-0 1-413589-1 1-5413589-1 1-413589-6 1-5413589-6 413590-3 5413590-3 413590-4 5413590-4 413590-8 5413590-8 413591-1 5413591-1 413592-2 5413592-2 413592-6 5413592-6 413592-9 5413592-9 1-413592-1 1-5413592-1 413631-1 5413631-1 413631-2 5413631-2 413631-3 5413631-3 413760-1 5413760-1 413760-3 5413760-3 413760-8 5413760-8 413760-9 5413760-9 413771-1 5413771-1 413771-3 5413771-3 413779-3 5413779-3 2-413779-4 2-5413779-4 413879-1 5413879-1 413879-2 5413879-2 413933-1 5413933-1 413959-1 5413959-1 413959-3 5413959-3 413959-4 5413959-4 413959-5 5413959-5 413959-6 5413959-6 non-rohs rohs compliant part no. part no. 413969-2 5413969-2 413986-1 5413986-1 414088-1 5414088-1 414094-2 5414094-2 414105-1 5414105-1 414160-5 5414160-5 414168-1 5414168-1 414168-3 5414168-3 414168-4 5414168-4 414168-5 5414168-5 414168-6 5414168-6 414170-1 5414170-1 414170-2 5414170-2 414171-3 5414171-3 414173-3 5414173-3 414194-1 5414194-1 414215-1 5414215-1 414217-1 5414217-1 414265-3 5414265-3 414284-2 5414284-2 414305-1 5414305-1 414337-1 5414337-1 414338-1 5414338-1 414352-1 5414352-1 414363-3 5414363-3 414363-4 5414363-4 414363-5 5414363-5 414363-8 5414363-8 414367-2 5414367-2 414373-1 5414373-1 414394-1 5414394-1 414409-1 5414409-1 414414-1 5414414-1 414459-1 5414459-1 414460-1 5414460-1 414493-4 5414493-4 414553-1 5414553-1 414651-3 5414651-3 414666-1 5414666-1 414758-1 5414758-1 414758-2 5414758-2 414758-3 5414758-3 414907-1 5414907-1 414946-2 5414946-2 414946-3 5414946-3 414946-5 5414946-5 414946-6 5414946-6 415006-1 5415006-1 415006-2 5415006-2 415020-1 5415020-1 415024-1 5415024-1 415024-3 5415024-3 415025-1 5415025-1 415025-2 5415025-2 415046-1 5415046-1 415085-1 5415085-1 415103-1 5415103-1 415103-2 5415103-2 415105-1 5415105-1 415105-2 5415105-2 415187-1 5415187-1 non-rohs rohs compliant part no. part no. 415189-1 5415189-1 415205-1 5415205-1 415214-1 5415214-1 415216-1 5415216-1 415218-5 5415218-5 415226-1 5415226-1 415232-4 5415232-4 415232-7 5415232-7 415242-2 5415242-2 415242-6 5415242-6 415248-1 5415248-1 415248-7 5415248-7 415252-1 5415252-1 415252-2 5415252-2 415252-3 5415252-3 415252-4 5415252-4 415255-1 5415255-1 415255-2 5415255-2 415255-3 5415255-3 415255-4 5415255-4 415276-2 5415276-2 415302-1 5415302-1 415302-2 5415302-2 415322-2 5415322-2 415332-1 5415332-1 415379-1 5415379-1 415381-1 5415381-1 415406-2 5415406-2 415417-1 5415417-1 415419-1 5415419-1 415485-1 5415485-1 415485-2 5415485-2 415485-3 5415485-3 415487-1 5415487-1 415487-2 5415487-2 415487-3 5415487-3 415520-1 5415520-1 415569-2 5415569-2 415632-1 5415632-1 415632-2 5415632-2 415633-1 5415633-1 415634-1 5415634-2 415634-2 5415634-2 415683-1 5415683-1 415712-1 5415712-1 415779-1 5415779-1 415832-1 5415832-1 447648-3 5447648-3 448103-2 5448103-2 603995-1 exempt 603995-2 exempt 603995-3 exempt 603995-5 exempt 603995-6 exempt 856402-1 exempt 887000-1 5887000-1 887046-1 5887046-1 887078-1 5887078-1 887089-1 5887089-1 1055439-1 exempt 1055440-1 exempt non-rohs rohs compliant part no. part no. 1055441-1 exempt 1055442-1 exempt 1055443-1 exempt 1055444-1 exempt 1055445-1 exempt 1055446-1 exempt 1055447-1 exempt 1055448-1 exempt 1055449-1 exempt 1055450-1 exempt 1055451-1 exempt 1055454-1 exempt 1055474-1 exempt 1055475-1 exempt 1055476-1 exempt 1055477-1 exempt 1055500-1 exempt 1055831-1 exempt 1055832-1 exempt 1055833-1 exempt 1055834-1 exempt 1055836-1 exempt 1055837-1 exempt 1055838-1 exempt 1055839-1 exempt 1055840-1 exempt 1055841-1 exempt 1055842-1 exempt 1055843-1 exempt 1057088-1 6057088-1 1057094-1 6057094-1 1057116-1 6057116-1 1057159-1 6057159-1 1057165-1 6057165-1 1057176-1 6057176-1 1059632-1 6059632-1 1059665-1 6059665-1 1061002-1 6061002-1 1061035-1 6061035-1 1061092-1 6061092-1 1061094-1 6061094-1 1213890-1 exempt 1274020-1 6274020-1 1274032-1 6274032-1 1274045-1 6274045-1 1274072-1 6274072-1 1274084-1 6274084-1 1274086-1 6274086-1 1274096-1 6274096-1 1274124-2 6274124-2 1274127-1 6274127-1 1274220-1 6274220-1 1274291-1 6274291-1 1274291-2 6274291-2 1274314-1 6274314-1 1274315-1 6274315-1 1274359-1 6274359-1 1274360-1 6274360-1 1274425-2 6274425-2 1274431-1 6274431-1 1274532-1 6274532-1 non-rohs rohs compliant part no. part no. rf coax connectors
312 catalog 1307191 dimensions are in millimeters dimensions are shown for usa: 1-800-522-6752 south america: 55-11-2103-6000 revised 3-07 and inches unless otherwise reference purposes only. canada: 1-905-470-4425 hong kong: 852-2735-1628 specified. values in brackets specifications subject mexico: 01-800-733-8926 japan: 81-44-844-8013 www.tycoelectronics.com are standard equivalents. to change. c. america: 52-55-1106-0803 uk: 44-8706-080-208 non-rohs to rohs compliant part number cross reference (continued) 1361137-1 6361137-1 1361138-1 1361138-1 1361139-1 6361139-1 1362765-1 6362765-1 1363524-1 6363524-1 1363525-1 6363525-1 1363526-1 6363526-1 1363527-1 6363527-1 1393488-3 exempt 1393488-4 exempt 1393524-1 exempt 1393524-4 exempt 1393524-5 exempt non-rohs rohs compliant part no. part no. 1311164-1 exempt 1312079-1 6312079-1 1312113-1 6312113-1 1312121-1 6312121-1 1312123-1 6312123-1 1312124-1 6312124-1 1312137-1 1312137-1 1312138-1 6312138-1 1312139-1 6312139-1 1328873-1 6328873-1 1329818-1 6329818-1 1329819-1 1329819-1 1331959-1 6331959-1 non-rohs rohs compliant part no. part no. 1-1393524-1 exempt 2-1393524-4 exempt 2-1393524-6 exempt 2-1393524-7 exempt 1393665-1 6-1393665-1 1-1393665-4 1-1393665-5 1-1393665-6 1-1393665-7 2-1393670-1 2-1393670-2 2-1393670-3 2-1393670-4 non-rohs rohs compliant part no. part no. 1393696-2 6-1393696-2 1393696-7 6-1393696-7 1402314-1 1402314-1 1408026-1 6408026-1 1408027-1 6408027-1 1408028-1 6408028-1 1408030-1 6408030-1 1408032-1 6408032-1 1408033-1 6408033-1 1408036-1 6408036-1 1408037-1 6408037-1 1408038-1 6408038-1 1725637-1 exempt non-rohs rohs compliant part no. part no. rf coax connectors
313 catalog 1307191 dimensions are in millimeters dimensions are shown for usa: 1-800-522-6752 south america: 55-11-2103-6000 revised 3-07 and inches unless otherwise reference purposes only. canada: 1-905-470-4425 hong kong: 852-2735-1628 specified. values in brackets specifications subject mexico: 01-800-733-8926 japan: 81-44-844-8013 www.tycoelectronics.com are standard equivalents. to change. c. america: 52-55-1106-0803 uk: 44-8706-080-208 127669-92 1311164-1 127893-98 1402314-1 2001 5003 02 1050525-1 2001 5031 02 1050542-1 2001 5032 02 1050548-1 2001 5385 02 1050598-1 2001 5395 02 1050602-1 2001 5443 02 1050611-1 2001 7188 02 1050721-1 2001 7641 02 1050740-1 2001 7941 02 1050757-1 2001 7985 02 1050770-1 2002 5015 00 1050854-1 2002 5016 00 1050859-1 2002 7188 02 1050903-1 2004 7188 02 1050996-1 2004 7641 02 1051005-1 2004 7685 02 1051007-1 2006 5010 00 1051046-1 2006 5013 00 1051052-1 2006 7941 00 1051081-1 2006 7985 00 1051085-1 2007 7188 02 1051140-1 2007 7641 02 1051145-1 2007 7685 02 1051147-1 2007 7941 02 1051151-1 2007 7985 02 1051157-1 2031 5002 00 1051638-1 2031 5003 02 1051644-1 2032 5002 00 1051852-1 2032 5003 02 1051855-1 2032 5007 00 1051861-1 2032 5021 02 1051867-1 2032 5026 02 1051869-1 2034 5008 00 1051942-1 2037 5005 02 1052063-1 2037 5006 02 1052067-1 2037 5007 02 1052072-1 2037 5008 02 1052076-1 2037 5100 02 1052098-1 2051 0000 02 1052324-1 2051 1352 02 1052349-1 2051 1618 02 1052360-1 2052 0000 02 1052422-1 2052 1200 02 1052518-1 2052 1201 00 1052522-1 2052 1201 02 1052523-1 2052 1215 02 1052528-1 2052 1300 02 1052534-1 2052 1350 02 1052544-1 2052 1352 02 1052552-1 2052 1612 02 1052563-1 2052 1658 02 1052577-1 2052 3354 02 1052628-1 2052 3356 02 1052634-1 2052 3358 02 1052643-1 2052 3359 02 1052646-1 2052 3363 02 1052652-1 2052 3500 02 1052684-1 2052 3502 02 1052689-1 2052 5636 02 1052898-1 m/a-com tyco electronics part no. part no. 2052 5674 02 1052902-1 2054 1201 02 1052978-1 2054 1231 02 1052982-1 2054 1241 02 1052986-1 2056 5006 02 1053092-1 2058 5029 02 1053222-1 2062 0000 00 1053354-1 2064 0000 00 1053378-1 2080 0000 00 1053488-1 2081 0000 02 1053635-1 2081 2301 00 1053646-1 2082 2249 02 1053780-1 2082 2700 00 1053788-1 2082 5133 02 1054426-1 2084 0000 02 1054869-1 2086 0000 02 1055018-1 2087 1230 02 1055047-1 2088 0000 02 1055065-1 2098 5206 54 1055439-1 2098 5207 54 1055440-1 2098 5208 54 1055441-1 2098 5209 02 1055442-1 2098 5210 02 1055443-1 2098 5211 02 1055444-1 2098 5212 02 1055445-1 2098 5213 02 1055446-1 2098 5214 02 1055447-1 2098 5215 02 1055448-1 2098 5216 54 1055449-1 2098 5217 54 1055450-1 2098 5218 02 1055451-1 2098 5221 10 1055454-1 2098 5279 10 1055474-1 2098 5281 02 1055475-1 2098 5282 02 1055476-1 2098 5283 02 1055477-1 2098 5516 02 1055500-1 2204 7941 09 1082029-1 2207 7985 09 1088312-1 2231 7388 36 1082034-1 2318 0000 54 1085456-1 2367 0000 54 1251802-1 2367 5001 54 1083946-1 2367 5002 54 1055689-1 2380 2240 00 1055694-1 2381 2241 00 1055695-1 2382 2240 00 1055696-1 2382 2241 00 1055697-1 2399 5011 54 1086008-1 2399 5012 54 1086009-1 2598 5196 54 1055831-1 2598 5197 54 1055832-1 2598 5198 54 1055833-1 2598 5199 54 1055834-1 2598 5201 54 1055836-1 2598 5202 54 1055837-1 2598 5203 54 1055838-1 2598 5204 54 1055839-1 2598 5205 54 1055840-1 2598 5206 54 1055841-1 2598 5207 54 1055842-1 m/a-com tyco electronics part no. part no. 2598 5208 54 1055843-1 2598 5342 54 1221286-1 2598 5438 54 1088313-1 2831 7316 02 1056436-1 2831 7341 02 1056438-1 2831 7388 02 1056443-1 2834 7316 02 1056445-1 2834 7341 02 1056447-1 2834 7358 02 1056450-1 2834 7388 02 1056452-1 2837 7316 02 1056456-1 2837 7388 02 1056462-1 2902 7947 62 1056526-1 2902 7985 62 1056527-1 2908 7947 62 1056553-1 2908 7985 62 1056554-1 2965 5006 62 1061692-1 2980 0000 62 1056700-1 2980 2240 00 1056702-1 2981 2241 00 1056706-1 2982 2240 00 1056707-1 2982 2241 00 1056708-1 2998 5001 02 1056721-1 2998 5002 02 1056722-1 2998 5003 02 1056724-1 2998 5022 94 1056728-1 2998 5028 02 1056729-1 2998 5030 02 1056731-1 2998 5035 02 1056736-1 2998 5043 02 1056743-1 2998 5044 02 1056744-1 2998 5045 02 1056745-1 2998 5054 94 1056750-1 2998 5055 94 1056751-1 2998 5056 94 1056752-1 3001 7941 00 6057088-1 3001 7985 00 6057094-1 3002 7941 00 6057116-1 3004 7941 00 6057159-1 3004 7985 00 6057165-1 3006 7941 00 6057176-1 3051 0000 10 1057275-1 3051 1200 10 1057277-1 3051 1201 10 1057279-1 3052 0000 10 1057284-1 3052 1201 10 1057290-1 3080 2240 00 1057341-1 3080 2242 00 1057343-1 3081 2241 00 1057367-1 3082 0000 00 1057374-1 3082 2240 00 1057377-1 3082 2241 00 1057381-1 3082 2243 00 1057385-1 3082 2310 00 1057387-1 3082 2311 00 1057388-1 3082 2320 00 1057390-1 3082 2321 00 1057392-1 3084 2240 00 1057463-1 3101 7941 00 1057631-1 3101 7985 00 1057635-1 3104 7941 00 1057676-1 m/a-com tyco electronics part no. part no. 3104 7985 00 1057679-1 3106 7941 00 1057697-1 3106 7985 00 1057699-1 3152 0000 10 1057775-1 3152 1201 10 1057780-1 3180 2242 00 1057841-1 3180 2302 00 1057843-1 3180 2320 00 1057845-1 3182 2240 00 1057853-1 3182 2243 00 1057857-1 3184 2240 00 1057908-1 3280 2224 00 1058056-1 3280 2240 00 1058058-1 3281 2223 00 1058066-1 3282 2223 00 1058077-1 3282 2240 00 1058081-1 3282 2241 00 1058083-1 3284 2240 00 1058117-1 3680 2240 00 1058651-1 3680 2242 00 1058653-1 3682 2241 00 1058664-1 3682 2242 00 1058666-1 3684 2240 00 1058675-1 4503 7685 02 1059399-1 4503 7941 00 1059402-1 4503 7985 00 1059404-1 4504 7641 02 1059408-1 4504 7941 00 1059410-1 4504 7985 00 1059412-1 4506 7641 02 1059451-1 4506 7685 02 1059452-1 4506 7941 02 1059453-1 4506 7985 02 1059456-1 4510 7941 00 1059465-1 4510 7985 00 1059467-1 4522 7941 02 1059505-1 4522 7985 02 1059506-1 4533 7388 02 1059523-1 4534 7341 02 1059525-1 4536 5014 02 1058572-1 4536 7341 02 1059540-1 4536 7388 02 1059541-1 4540 7388 02 1059551-1 4551 1201 02 1059563-1 4551 1352 02 1059566-1 4551 3357 02 1059572-1 4552 1201 02 1059594-1 4552 1352 02 1059596-1 4557 5009 02 1059617-1 4557 5119 02 6059632-1 4557 5329 02 1059637-1 4557 5368 02 1059651-1 4558 1154 02 1059654-1 4558 5009 02 1059657-1 4558 5119 02 6059665-1 4558 5329 02 1059671-1 4562 0000 00 1059681-1 4563 0000 00 1059684-1 4563 5004 00 1253111-1 4565 0000 00 1059691-1 4580 2240 02 1059707-1 m/a-com tyco electronics part no. part no. rf coax connectors m/a-com to tyco electronics part number cross reference
314 catalog 1307191 dimensions are in millimeters dimensions are shown for usa: 1-800-522-6752 south america: 55-11-2103-6000 revised 3-07 and inches unless otherwise reference purposes only. canada: 1-905-470-4425 hong kong: 852-2735-1628 specified. values in brackets specifications subject mexico: 01-800-733-8926 japan: 81-44-844-8013 www.tycoelectronics.com are standard equivalents. to change. c. america: 52-55-1106-0803 uk: 44-8706-080-208 m/a-com to tyco electronics part number cross reference (continued) 5837 5025 10 1330723-1 5837 5030 10 1329293-1 5837 5031 09 1363301-2 5837 5031 10 1363301-1 5858 0000 09 1060959-1 5858 0000 10 1060960-1 5862 5002 09 1060984-1 5862 5002 10 1060985-1 5862 5003 09 1330126-1 5862 5003 10 1060989-1 5862 5004 09 1060995-1 5862 5004 10 1060996-1 5862 5007 13 6061002-1 5862 5018 13 1061007-1 5863 0000 09 1085221-1 5863 0000 10 1061015-1 5864 5001 09 1061022-1 5864 5001 10 1061023-1 5864 5002 09 1061026-1 5864 5002 10 1061027-1 5864 5003 09 1061029-1 5864 5003 10 1061030-1 5864 5008 13 6061035-1 5880 2240 00 1061070-1 5881 2241 00 1061071-1 5882 2240 00 1061072-1 5882 2241 00 1061073-1 5899 5004 54 6061092-1 5899 5009 54 6061094-1 7081 2301 00 1061738-1 7081 2311 00 1061739-1 7081 5008 00 1061742-1 7081 5009 00 1061744-1 7082 2242 00 1061750-1 7082 2243 00 1061751-1 7082 2300 00 1061752-1 7082 2310 00 1061753-1 7082 5004 00 1061757-1 7082 5005 00 1061758-1 9631 7179 10 1362990-1 9637 7179 10 1362991-1 9662 5000 10 1361169-1 9664 0000 10 1363106-1 9960 1100 24 1064524-1 9960 1200 24 1064530-1 9960 1305 24 1064533-1 9960 2100 24 1064535-1 9960 2200 24 1064538-1 9960 2305 24 1064540-1 9960 2510 24 1064542-1 m/a-com tyco electronics part no. part no. 4581 2241 02 1059711-1 4581 2700 00 1059713-1 4582 2240 02 1059716-1 4582 2241 02 1059718-1 4582 2700 00 1059720-1 4583 2240 02 1059724-1 4584 2240 02 1059729-1 4584 2242 02 1059731-1 4584 2244 02 1059733-1 4585 2240 02 1059756-1 4585 2241 02 1059758-1 4703 7985 00 1059857-1 4706 7985 02 1059868-1 4710 7985 00 1059874-1 4733 7316 02 1059884-1 4733 7388 02 1059886-1 4736 5001 02 1059887-1 4736 7316 02 1059888-1 4740 7388 00 1059889-1 4751 3355 02 1059894-1 4757 1154 02 1059901-1 4757 3204 00 1059902-1 4757 5006 02 1059903-1 4757 5014 00 1059905-1 4763 0000 00 1059919-1 5001 5015 09 1060163-1 5007 5008 09 1060183-1 5031 5007 09 1060220-1 5031 5014 09 1060221-1 5062 5003 09 1060256-1 5064 5003 09 1060259-1 5134 5016 10 1254781-1 5180 2240 00 1060487-1 5181 2241 00 1060494-1 5182 2240 00 1060498-1 5182 2241 00 1060500-1 5801 7947 09 1060772-2 5801 7985 09 1060772-1 5802 7947 09 1060774-2 5802 7985 09 1060774-1 5807 7985 09 1060787-1 5818 5002 09 1060811-2 5818 5002 10 1060811-1 5818 5003 10 1060813-1 5831 5002 10 1060869-1 5831 5003 09 1060871-1 5831 5003 10 1060872-1 5831 7316 09 1060875-2 5831 7316 10 1060875-1 5834 7388 10 1060883-1 m/a-com tyco electronics part no. part no. 9960 3100 24 1082845-1 9960 4100 01 1064543-1 9960 4100 02 1064544-1 9960 4100 04 1064546-1 9960 4100 07 1064549-1 9960 4100 08 1064550-1 9960 4200 01 1064552-1 9960 4200 02 1064553-1 9960 4200 04 1064555-1 9960 4200 07 1064558-1 9960 4200 08 1064559-1 9960 4305 01 1064560-1 9960 4305 02 1064561-1 9960 4305 04 1064563-1 9960 4305 07 1064566-1 9960 4305 08 1064567-1 9980 4100 01 1329174-1 9980 4100 02 1329175-1 9980 4100 04 1408050-4 9980 4100 05 1255378-4 9980 4100 07 1408051-4 9980 4100 08 1330401-4 9980 4200 01 1329174-2 9980 4200 02 1329175-2 9980 4200 04 1408050-5 9980 4200 05 1255378-5 9980 4200 07 1408051-5 9980 4200 08 1330401-5 9980 4305 01 1310432-1 9980 4305 02 1329175-3 9980 4305 04 1408050-6 9980 4305 05 1255378-6 9980 4305 07 1408051-6 9980 4305 08 1330401-6 a55p22e999x 1311206-1 a55p23e999x 1313453-1 a55x01b999x 6312079-1 a57r03g999x 1311209-1 b67a54t022x 1311097-1 b67a54t117x 1311098-1 b67a64t022x 1311099-1 b67a64t062x 1311100-1 b67a64t280x 1311696-1 b67a64t437x 1311102-1 b67a64ta25x 1313507-1 b67b42t022x 1311103-1 b67b42t437x 1311104-1 b67b44t022x 1311106-1 b67b44t062x 1311698-1 b67b44t437x 1311111-1 m/a-com tyco electronics part no. part no. b67b44ta25x 1313508-1 b67e64t022x 1408041-1 b67h16t493x 1313511-1 b67h49t022x 1311115-1 b67h64t022x 1327083-1 b67h64t062x 1311117-1 b67h64t117x 1311700-1 b67h64t280x 1313883-1 b67h64t437x 1311118-1 b67h64ta25x 1313887-1 b67h66t022x 1311120-1 b67h66t062x 1311701-1 b67h66t437x 1311122-1 b67h74t463x 1314422-1 b67n08t999x 1311125-1 b67n12t999x 1314103-1 b67n25t999x 1314102-1 b67p34g999x 1313364-1 b67r53g999x 1311127-1 b67z50t999x 6-1311703-1 c65e06g022x 1311638-1 d75a02b001x 6331959-1 d75a02b004x 6362765-1 d75b01b470x 6328873-1 d75b02b010x 6408028-1 d75b03b001x 6408030-1 d75b03b004x 6312113-1 d75b04b004x 6408027-1 d75b04b010x 6408026-1 d75b05b004x 6408038-1 d75g03b001r 6408032-1 d75g03b004r 6408033-1 d75g07b060r 6363524-1 d75g08b001r 6363525-1 d75g08b004r 6363526-1 d75g09b010r 6363527-1 d75g10b004r 6408036-1 d75r02b999x 6408037-1 d75x06b999x 6312121-1 d75x12e470x 6312123-1 d75x14b999x 6312124-1 d75x15b999x 6361137-1 n15x09e470x 1312137-1 n15x10b999x 6312138-1 n15x12e470x 6329818-1 n15x14e010x 6312139-1 n15x16e999x 1361138-1 n15x17e999x 6361139-1 n15x18e010x 1329819-1 t35e60e010x 1312569-1 m/a-com tyco electronics part no. part no. rf coax connectors
315 catalog 1307191 dimensions are in millimeters dimensions are shown for usa: 1-800-522-6752 south america: 55-11-2103-6000 revised 3-07 and inches unless otherwise reference purposes only. canada: 1-905-470-4425 hong kong: 852-2735-1628 specified. values in brackets specifications subject mexico: 01-800-733-8926 japan: 81-44-844-8013 www.tycoelectronics.com are standard equivalents. to change. c. america: 52-55-1106-0803 uk: 44-8706-080-208 note: this index lists all cataloged parts by base no. only. complete part nos. (with prefixes and/or suffixes) are shown on the page(s) indicated. rf coax connectors 1052689 120 1052898 118 1052902 119 1052978 117 1052982 117 1052986 117 1053092 115 1053222 117 1053354 121 1053378 121 1053488 122 1053635 122 1053646 256 1053780 123 1053788 259 1054426 123 1054869 123 1055018 122 1055047 123 1055065 122 1055689 214 1055694 217, 255 1055695 217, 253 1055696 217, 258 1055697 217, 259 1056436 106 1056438 106 1056443 106 1056445 107 1056447 107 1056450 107 1056452 107 1056456 108 1056462 108 1056526 154 1056527 154 1056553 154 1056554 154 1056700 152, 154 1056702 255 1056706 253 1056707 258 1056708 259 1056721 152, 155 1056722 155 1056724 155 1056728 156 1056729 155 1056731 155 1056736 155 1056743 155 1056744 155 1056745 155 1056750 156 1056751 156 1056752 156 1057275 24 1057277 24 1057279 24 1057284 24 1057290 24 1057341 254 part no. page 50084 246 50095 246 50105 246 50107 246 51563 247, 248 51565 248 51692 21 51751 194 201097 245 201098 245 201143 245 201144 245 201145 245 201146 245 221108 58, 72, 73 221500 41 221509 42 221539 94 221540 94 221543 63 221551 64 221586 63 221789 121 221790 121 221951 55, 56 221988 63 222163 61, 74 222428 52 225014 22 225088 248 225093 22 225094 23 225348 38 225389 22 225551 35 225668 23 225886 49 226023 247 226060 247 226537 248 227223 55, 56 227945 25 228179 33 228215 182 228216 182 228502 37 228553 179 228658 23 282938 97 329631 57, 58, 59 73, 91 329632 57, 58, 59, 73, 91 330022 65 330024 64 330620 54 332056 248 332057 248 413453 65 part no. page 413985 178 413990 180 413996 181 414002 178 414026 181 414171 35 414396 43 414612 180 414766 94 414895 182 414946 178 414948 179 414963 181 414969 182 415001 182 415232 21 415327 99 415340 181 415377 185 415380 181 415381 181 415490 185 415500 184 415504 185 415523 99 415567 76 415672 181 415774 180 415796 64 619028 230, 235 619041 230 619052 235 619053 236 619061 230, 231 619062 230, 231 619068 235 619072 230, 231 619075 233 619076 235 619078 230, 235 619085 131 619106 136 619107 133 619115 115 619127 204 619133 232 619134 204 619135 204 619137 235 619196 234 619201 233 619210 236 619211 234 619213 234 619214 236 619215 127 619219 261 619220 136 619223 131 619224 131 619226 135 619228 135 part no. page 619229 206 619231 233 619238 206 619271 261 887098 94 1050525 110 1050542 110 1050548 110 1050598 112 1050602 112 1050611 112 1050721 105 1050740 112 1050757 110 1050770 110 1050854 110 1050859 110 1050903 105 1050996 106 1051005 113 1051007 113 1051046 111 1051052 111 1051081 111 1051085 111 1051140 106 1051145 113 1051147 113 1051151 112 1051157 112 1051638 104 1051644 104 1051852 104 1051855 107 1051861 104 1051867 107 1051869 107 1051942 104 1052063 105 1052067 105 1052072 108 1052076 108 1052098 108 1052324 114 1052349 116 1052360 118 1052422 114 1052518 116 1052522 116 1052523 116 1052528 119 1052534 114 1052544 114 1052552 116 1052563 118 1052577 119 1052628 120 1052634 120 1052643 120 1052646 120 1052652 120 1052684 120 part no. page part number index
316 catalog 1307191 dimensions are in millimeters dimensions are shown for usa: 1-800-522-6752 south america: 55-11-2103-6000 revised 3-07 and inches unless otherwise reference purposes only. canada: 1-905-470-4425 hong kong: 852-2735-1628 specified. values in brackets specifications subject mexico: 01-800-733-8926 japan: 81-44-844-8013 www.tycoelectronics.com are standard equivalents. to change. c. america: 52-55-1106-0803 uk: 44-8706-080-208 part number index (continued) rf coax connectors 1059617 165 1059637 167 1059651 165 1059654 165 1059657 165 1059671 168 1059681 166 1059684 166 1059691 166 1059707 255 1059711 253 1059713 256 1059716 259 1059718 257 1059720 257 1059724 255 1059729 255 1059731 255 1059733 255 1059756 259 1059758 257 1059857 171 1059868 171 1059874 171 1059884 172 1059886 172 1059887 172 1059888 172 1059889 172 1059894 175 1059901 173 1059902 175 1059903 173 1059905 175 1059919 174 1060163 194 1060183 195 1060220 194 1060221 194 1060256 195 1060259 195 1060487 255 1060494 253 1060498 258 1060500 258 1060772 199 1060774 199 1060787 200 1060811 198 1060813 198 1060869 198 1060871 198 1060872 198 1060875 198 1060883 199 1060959 201 1060960 201 1060984 200 1060985 200 1060989 200 1060995 200 1060996 200 part no. page 1057343 254 1057367 253 1057374 25 1057377 258 1057381 257 1057385 257 1057387 258 1057388 257 1057390 257 1057392 257 1057463 254 1057631 33 1057635 33 1057676 37 1057679 37 1057697 38 1057699 38 1057775 41 1057780 41 1057841 254 1057843 254 1057845 254 1057853 258 1057857 258 1057908 255 1058056 254 1058058 254 1058066 253 1058077 257 1058081 258 1058083 257 1058117 254 1058572 163 1058651 255 1058653 255 1058664 257 1058666 259 1058675 255 1059399 162 1059402 158, 160 1059404 158, 160 1059408 162 1059410 158, 160 1059412 158, 160 1059451 162 1059452 162 1059453 160 1059456 160 1059465 161 1059467 161 1059505 161 1059506 161 1059523 163 1059525 163 1059540 163 1059541 163 1059551 163 1059563 164 1059566 164 1059572 168 1059594 164 1059596 164 part no. page 1061007 201 1061015 200 1061022 201 1061023 201 1061026 201 1061027 201 1061029 201 1061030 201 1061070 254 1061071 253 1061072 258 1061073 256 1061692 156 1061738 256 1061739 256 1061742 256 1061744 256 1061750 259 1061751 256 1061752 257 1061753 258 1061757 256 1061758 258 1064524 214 1064530 214 1064533 214 1064535 215 1064538 215 1064540 215 1064542 215 1064543 216 1064544 216 1064546 216 1064549 217 1064550 217 1064552 216 1064553 216 1064555 216 1064558 217 1064559 217 1064560 216 1064561 216 1064563 216 1064566 217 1064567 217 1082029 111 1082034 106 1082845 215 1083946 214 1085221 200 1085456 209 1086008 209 1086009 209 1088312 112 1088313 209 1221286 217 1251802 214 1253111 166 1255378 211 1274007 77 1274191 239 1274192 239 part no. page 1274330 181 1274449 133 1274513 145 1274520 133 1274544 134 1274563 80 1274566 80 1274568 80 1274571 81 1274572 81 1274584 81 1274594 133 1274662 28 1274663 81 1274668 57 1274684 81 1274688 27 1274689 27 1274694 109 1274714 137 1274734 27 1274735 27 1274794 237 1274795 237 1274804 27 1274805 27 1274806 27 1274807 28 1274808 28 1274935 76 1310432 210 1311097 187 1311098 187 1311099 187 1311100 187 1311101 187 1311102 187 1311103 188 1311104 188 1311106 188 1311111 188 1311115 189 1311117 190 1311118 190 1311120 189 1311122 189 1311125 190 1311127 191 1311206 254 1311209 254 1311638 194 1311696 187 1311698 188 1311700 190 1311701 189 1311703 191 1312137 18 1312569 35 1313364 191 1313453 253 1313507 187 1313508 188 part no. page
317 catalog 1307191 dimensions are in millimeters dimensions are shown for usa: 1-800-522-6752 south america: 55-11-2103-6000 revised 3-07 and inches unless otherwise reference purposes only. canada: 1-905-470-4425 hong kong: 852-2735-1628 specified. values in brackets specifications subject mexico: 01-800-733-8926 japan: 81-44-844-8013 www.tycoelectronics.com are standard equivalents. to change. c. america: 52-55-1106-0803 uk: 44-8706-080-208 part number index (continued) rf coax connectors 5329458 53 5329517 64 5330061 47 5330062 51 5330063 53 5330358 48 5330876 47 5330878 49 5331175 50 5331178 50 5331182 50 5331238 36 5332215 92 5332225 90 5332342 90 5413194 72 5413364 65 5413366 63 5413476 85 5413506 43 5413515 85 5413524 85 5413557 65 5413558 75 5413588 68 5413589 66, 67 5413590 67, 70 5413591 42 5413592 63 5413631 62 5413760 69 5413771 53, 54 5413779 51 5413879 57 5413933 40 5413959 50 5413969 60 5413986 74 5414088 74 5414094 85 5414105 64 5414160 21 5414168 36 5414170 179 5414171 35 5414173 34 5414194 56 5414215 85 5414217 71 5414265 50 5414284 85 5414305 60 5414311 63 5414337 181 5414338 181 5414352 85 5414363 178 5414367 88 5414373 62 5414394 74 5414409 72 5414414 64 part no. page 1313511 189 1313883 190 1313887 190 1314102 190 1314103 190 1314422 190 1327083 190 1329174 210 1329175 210 1329293 198 1329819 18 1330126 200 1330401 211 1330723 198 1361138 18 1361169 203 1362990 203 1362991 203 1363106 203 1363301 198 1392019 240 1392020 240 1393562 137, 147 1393662 241 1393665 148, 149, 150, 253, 256, 259 1393668 240 1393670 131, 132, 133, 134, 135, 136, 147, 253, 256, 259, 260 1393672 141, 142, 143 1393680 140, 142, 143, 144 1393681 140, 141, 143, 145, 146, 150 1393682 140, 141, 142, 143, 144 1393696 250 1393757 142, 145, 220 1402314 15 1407578 208 1408041 188 1408050 211 1408051 211 1408120 221 1408148 219 1408149 219 1408150 220 1408151 220 1408152 221 1408312 219 1408313 219 1408314 219 1408332 127 1408333 126 1408336 126 1408337 127 1408338 126 1408339 126 1408340 128 1408341 128 1408342 128 1408343 128, 260 1408346 125 part no. page 1408347 125 1408348 125 1408349 125 1408393 128, 253 1408496 220 1408541 109 1442004 206 1460010 131 1460052 10 1460055 25 1460060 134 1460118 25 1460128 144 1460132 141 1460139 134 1460159 9 1460169 144 1460468 115 1460469 115 1460470 195 1460802 261 1460803 261 1460815 135 1460817 135 1460821 147, 148 1460823 146 1484546 174 1566230 224 1658260 204 1750107 225 1750108 225 1750109 225 1750110 226 1775146 224 1775227 227, 260 1775228 227, 260 1775229 227, 259 1775230 227, 259 5148385 239 5148386 239 5221111 180 5221123 60 5221128 47, 48, 49, 55 5221162 243 5221185 66 5221198 91 5221199 69 5221221 70 5221244 71 5221325 41 5221336 75 5221402 68 5221506 42 5221629 65 5221980 242 5221981 242 5222006 61 5222092 72 5222093 72 5222117 76 5222132 73 5222165 64 part no. page 5222420 60 5222462 74 5222506 32 5225089 24 5225092 21 5225349 34 5225361 21 5225363 23 5225392 21 5225395 47, 48, 49 5225396 51 5225397 52 5225398 53, 54 5225554 34 5225555 32 5225557 36 5225559 34 5225661 21 5225662 21 5225664 22 5225667 23 5225669 22 5225699 21 5225886 49 5225974 50 5226978 59 5226990 57 5226993 58 5227079 47, 48, 49 5227086 21 5227161 57 5227169 55 5227222 58 5227426 56 5227661 57 5227671 58 5227673 58 5227676 57 5227677 57 5227699 60 5227715 55 5227716 55 5227726 56 5227754 55 5227755 55 5227764 40 5227818 39 5227820 39 5227839 39 5228217 179 5228226 64 5228435 181 5228596 242 5228618 242 5228686 91 5228979 51 5228980 53, 54 5329444 48 5329445 49 5329446 47 5329452 51 5329456 54 part no. page
318 catalog 1307191 dimensions are in millimeters dimensions are shown for usa: 1-800-522-6752 south america: 55-11-2103-6000 revised 3-07 and inches unless otherwise reference purposes only. canada: 1-905-470-4425 hong kong: 852-2735-1628 specified. values in brackets specifications subject mexico: 01-800-733-8926 japan: 81-44-844-8013 www.tycoelectronics.com are standard equivalents. to change. c. america: 52-55-1106-0803 uk: 44-8706-080-208 part number index (continued) rf coax connectors 5415255 22 5415276 96 5415302 95 5415322 97 5415332 98 5415379 181 5415406 98 5415417 72 5415419 72 5415484 184 5415487 184 5415520 73 5415569 95 5415632 73 5415633 72 5415634 72 5415683 98 5415712 95 5415779 87 5415832 92 5447648 107 5448103 107 5887000 98 5887046 97 5887078 95 5887089 97 6057088 21 6057094 21 part no. page 5414459 72 5414460 60 5414493 87 5414553 87 5414651 86 5414666 64 5414758 87 5414907 72 5414946 178 5415006 179 5415020 76 5415024 96 5415025 62 5415046 57 5415085 86 5415103 85 5415105 72 5415187 71 5415189 60 5415205 86 5415214 96 5415216 86 5415218 57 5415226 94 5415232 21 5415242 22 5415248 23 5415252 24 part no. page 6057116 22 6057159 23 6057165 23 6057176 23 6059632 167 6059665 167 6061002 202 6061035 202 6061092 202 6061094 202 6274020 97 6274032 98 6274045 98 6274072 72 6274084 72 6274086 71 6274096 121 6274124 75 6274127 75 6274291 74 6274314 61 6274315 61 6274359 74 6274360 74 6274425 76 6274431 133 6274532 21 6311225 10 part no. page 6312079 14 6312113 9 6312121 15 6312123 19 6312124 19 6312138 15 6312139 19 6328873 10 6329818 17 6331959 9 6361137 17 6361139 19 6362765 9 6363524 11 6363525 11 6363526 11 6363527 11 6408026 10 6408027 10 6408028 9 6408030 9 6408032 10 6408033 10 6408036 11 6408037 11 6408038 10 6408399 18 part no. page 13126 268 13127 268 21027 268 58318 268 58433 266 58483 192 58489 192 59980 267, 268 59981 268 69477 266 69710 266 189721 266 220015 266 220220 268 220221 268 220222 268 220224 268 220241 268 307581 268 308075 268 311386 268 311392 268 part no. page 311395 268 311396 268 312067 268 312253 268 312317 268 354500 267 603995 267 856402 266 1055420 263 1055439 262, 263 1055440 262, 263 1055441 262, 263 1055442 263 1055443 263 1055444 263 1055445 263 1055446 263 1055447 263 1055448 263 1055449 263 1055450 263 1055451 263 part no. page 1055454 263 1055469 262 1055474 262 1055475 262 1055476 262 1055477 262 1055500 263 1055831 263 1055832 263 1055833 263 1055834 263 1055835 263 1055836 263 1055837 263 1055838 263 1055839 263 1055840 263 1055841 263 1055842 263 1055843 263 1213890 266 1311164 191 part no. page 1393488 265 1393494 265 1393524 264 , 265 1725837 266 1775231 227 m22520/36-01 268 m22520/36-02 268 m22520/36-03 268 m22520/36-04 268 m22520/36-05 268 m22520/36-06 268 m22520/36-07 268 m22520/36-08 268 m22520/36-09 268 m22520/36-10 268 m22520/36-11 268 m22520/36-12 268 m22520/36-13 268 mil-c-22520/2-01 192 mil-c-22520/5-01 192 part no. page t ooling part number index
1307191?m?ug?p?-07 t yco electronics corporation printed in the u.s.a. www.tycoelectronics.com americas for latin/south american countries not shown phone: +54-11-4733-2015 fax: +54-11-4733-2083 asia/ pacific europe/ middle east/africa argentina ?buenos aires phone: +54-11-4733-2200 fax: +54-11-4733-2211 brasil ?s?o paulo phone: +55-11-3611-1311 fax: +55-11-3611-0397 canada ?toronto phone: +905-475-6222 fax: +905-474-5520 product information center: (technical support) phone: +905-470-4425 fax: +905-474-5525 colombia ?bogota phone: +57-1-231-9398 fax: +57-1-660-0206 mexico ?mexico city phone: +52-55-1106-0800 +01-800-733-8926 fax: +52-55-1106-0901 united states ?harrisburg, pa phone: +717-564-0100 fax: +717-986-7575 product information center: (technical support) phone: +800-522-6752 fax: +717-986-7575 australia ?sydney phone: +61-2-9554-2600 fax: +61-2-9502-2556 product information center: (technical support) phone: +61-2-9840-8200 fax: +61-2-9634-6188 india ?bangalore phone: +91-80-285-40800 fax: +91-80-285-40820 indonesia ?jakarta phone: +65-6482-0311 fax: +65-6482-1012 japan ?toyko phone: +81-44-844-8111 fax: +81-44-812-3207 product information center: (technical support) phone: +81-44-844-8013 fax: +81-44-812-3200 korea ?seoul phone: +82-2-3415-4500 fax: +82-2-3486-3810 malaysia ?kuala lumpur phone: +60-3-78053055 fax: +60-3-78053066 new zealand ?auckland phone: +64-9-634-4580 fax: +64-9-634-4586 philippines ?makati city phone: +632-848-0171 fax: +632-867-8661 peoples republic of china hong kong phone: +852-2735-1628 fax: +852-2735-0243 shanghai phone: +86-21-2407-1588 fax: +86-21-2407-1599 ta iwan ?taipei phone: +886-2-8768-2788 fax: +886-2-8768-2268 singapore ?singapore phone: +65-6482-0311 fax: +65-6482-1012 thailand ?bangkok phone: +66-2-955-0500 fax: +66-2-955-0505 vi etnam and indochina ? ho chi minh city phone: +84-8 930-5546 fax: +84-8 930-3443 austria ?vienna phone: +43-1 90 5 60-0 fax: +43-1 90 5 60-1333 belgium ?kessel-lo phone: +32-16-35-23-00 fax: +32-16-35-23-52 bulgaria ?sofia phone: +359-2-971-2152 fax: +359-2-971-2153 czech republic ?kurim phone: +420-5-41-162-111 fax: +420-5-41-162-223 denmark ?glostrup phone: +45-43-480-452 fax: +45-43-441-414 egypt ?cairo phone: +20-2-29 04 281 fax: +20-2-41 92 334 estonia ?tartu phone: +372-5138-274 fax: +372-7400-779 finland ?helsinki phone: +358-95-12-34-20 fax: +358-95-12-34-250 france ?cergy-pontoise phone: +33-1-3420-8888 fax: +33-1-3420-8600 product information center: (technical support) phone: +33-1-3420-8943 fax: +33-1-3420-8623 germany ?bensheim phone: +49-6251-133-0 fax: +49-6251-133-1600 product information center: (technical support) phone: +49-6251-133-1999 fax: +49-6251-133-1988 germany ?langen phone: +49-6103-709-0 fax: +49-6103-709-1223 germany ?speyer phone: +49-6232-30-0 fax: +49-6232-30-2243 germany - hts division ?neunkirchen phone: +49-2247-305-0 fax: +49-2247-305-122 greece ?athens phone: +30-210-9370-396/397 fax: +30-210-9370-655 hungary ?budapest phone: +36-1-289-1000 fax: +36-1-289-1010 ireland ?dublin phone: +353-1-820-3000 fax: +353-1-820-9790 israel ?yokneam phone: +972-4-959-0508 fax: +972-4-959-0506 italy ?collegno (torino) phone: +39-011-4012-111 fax: +39-011-4031116 lithuania ?vilnius phone: +370-5-2131-402 fax: +370-5-2131-403 netherlands ?s-hertogenbosch phone: +31-73-624-62-46 fax: +31-73-621-23-65 product information center: (technical support) phone: +31-73-6246-999 fax: +31-73-6246-998 norway ?nesbru phone: +47-66-77-8886 fax: +47-66-77-8855 poland ?warsaw phone: +48-22-45-76-700 fax: +48-22-45-76-720 romania ?bucharest phone: +40-21-311-3479/3596 fax: +40-21-312-0574 russia ?moscow phone: +7-495-926-5506/07/08/09 fax: +7-495-926-5505 russia ?st. petersburg phone: +7-812-718-8192 fax: +7-812-718-8193 slovenia ?ljubljana phone: +386-1561-3270 fax: +386-1561-3240 south africa ?port elizabeth phone: +2741-503-4500 fax: +2741-581-0440 spain ?barcelona phone: +34-93-291-0330 fax: +34-93-201-7879 product information center: (technical support): phone: +34-93-291-0330 fax: +34-93-200-3779 sweden ?upplands v?sby phone: +46-8-50-72-50-00 fax: +46-8-50-72-50-01 switzerland ?steinach phone: +41-71-447-0447 fax: +41-71-447-0444 tur key ?istanbul phone: +90-212-281-8181/2/3 fax: +90-212-281-8184 ukraine ?kiev phone: +380-044-206-2265 fax: +380-044-206-2264 united kingdom ?swindon phone: +44-8706-080-208 fax: +44-1793-572-109 product information center: (technical support) freephone gb: 0800-267-666 phone: +44-208-420-8341 or 8343 +44-208-420-8081 for middle east/african countries not shown phone: +33-1-3420-8866 fax: +33-1-3420-8300 global contacts
ty co electronics corporation harrisburg, pennsylvania 1307191 revised 3-07 3m-lug-fp tycoelectronics.com

▲Up To Search▲

Price & Availability of 1361138-1

	To Download 1361138-1 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .