analog power AM3407PE p-channel 20-v (d-s) mosfet v ds (v) i d (a) -5 -3 source: 4 symbol limit units v ds -20 v gs 12 t a =25c -5 t a =100c -3.3 i dm -20 i s -1 a power dissipation a t a =25c p d 1.40 w t j , t stg -55 to 150 c symbol maximum units 62.5 110 notes a. surface mounted on 1 x 1 fr4 board. b. pulse width limited by maximum junction temperature absolute maximum ratings (t a = 25c unless otherwise noted) parameter -20 drain-source voltage v gate-source voltage product summary r ds(on) (m) 34 @ v gs = -4.5v 48 @ v gs = -2.5v drain: 1,2,5,6 gate: 3 operating junction and storage temperature range thermal resistance ratings parameter maximum junction-to-ambient a t <= 10 sec r ja c/w steady state i d a pulsed drain current b continuous source current (diode conduction) a continuous drain current a key features: ? low r ds(on) trench technology ? low thermal impedance ? fast switching speed typical applications: ? battery powered instruments ? portable computing ? mobile phones ? gps units and media players tsop6 ? preliminary 1 publication order number: ds-AM3407PE-2010
analog power AM3407PE parameter symbol test conditions min typ max unit gate-source threshold voltage v gs(th) v ds = v gs , i d = -250 ua -20 v gate-body leakage i gss v ds = 0 v, v gs = 12 v 10 ua v ds = -16 v, v gs = 0 v -1 v ds = -16 v, v gs = 0 v, t j = 85c -30 on-state drain current i d(on) v ds = -5 v, v gs = -4.5 v 10 a v gs = -4.5 v, i d = -5 a 34 v gs = -2.5 v, i d = -3 a 48 forward transconductance g fs v ds = -15 v, i d = -5 a 10 s diode forward voltage v sd i s = -1.0 a, v gs = 0 v -0.7 v total gate charge q g 16 gate-source charge q gs 4 gate-drain charge q gd 5 turn-on delay time t d(on) 6 rise time t r 12 turn-off delay time t d(off) 75 fall time t f 38 input capacitance c iss 1450 output capacitance c oss 200 reverse transfer capacitance c rss 165 notes a. pulse test: pw <= 300us duty cycle <= 2%. b. guaranteed by design, not subject to production testing. ns v ds = -10 v, v gs = -4.5 v, i d = -5 a electrical characteristics drain-source on-resistance r ds(on) m dynamic zero gate voltage drain current static ua i dss nc v dd = -10 v, r l = 10 , i d = -1 a, v gen = -4.5 v, r gen = 6 v ds = -10 v, v gs = 0 v, f = 1 mhz analog power (apl) reserves the right to make changes without further notice to any products herein. apl makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does apl assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. typical parameters which may be provided in apl data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. all operating parameters, including typicals must be validated for each customer application by customers technical experts. apl does not convey any license under its patent rights nor the rights of others. apl products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the apl product could create a situation where personal injury or death may occur. should buyer purchase or use apl products for any such unintended or unauthorized application, buyer shall indemnify and hold apl and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that apl was negligent regarding the design or manufacture of the part. apl is an equal opportunity/affirmative action employer. pf ? preliminary 2 publication order number: ds-AM3407PE-2010
analog power AM3407PE typical electrical characteristics ? preliminary 3 publication order number: ds-AM3407PE-2010
analog power AM3407PE typical electrical characteristics ? preliminary 4 publication order number: ds-AM3407PE-2010
analog power AM3407PE 2.90 bsc 2.890 bsc 1.45 0.95bsc 1.90bsc 0.15 1.3 0.9 0.3 0.6 1.5 0.08 1.7 0.25 0.3 0.5 min. max. dimensions in millimeters --- --- package information l e1 e b c a symbol e1 e d a2 a1 tsop6 ? preliminary 5 publication order number: ds-AM3407PE-2010
|
