53 smps capacitors (se style) extended commercial radial range se 01 3 c 125 m a a * style size see chart below voltage 25v = 3 50v = 5 100v = 1 temperature coefficient x7r = c capacitance code (2 significant digits + no. of zeros) 22 nf = 223 220 nf = 224 1 f = 105 100 f = 107 capacitance tolerance x7r: k = 10% m = 20% z = +80, -20% te s t level a = standard b = hi-rel * leads a = tin/lead r = rohs compliant packaging (see note 1) note 1: no suffix signifies bulk packaging, which is avx standard packaging. parts available tape and reel per eia- 468. use suffix tr1 if tape & reel is required. note: capacitors with x7r dielectrics are not intended for applications across ac supply mains or ac line filtering with polarity reversal. contact plant for recommendations. * hi-rel screening consists of 100% group a, subgroup 1 per mil-prf-39014. product offering C x7r avx se styles offer capacitance extension to popular sk ranges. the cv product for se-series, x7r capacitors (tcc: 15% over -55 to +125c) compares favorably to high cv ranges offered by other suppliers in much less stable y5u dielectric (tcc: +22/-56% over -30 to +85c). se style capacitors are conformally coated and are designed for input and output filtering applications in switch mode power supplies. temperature coefficient x7r: temperature coefficient 15%, -55 to +125c capacitance test (mil-std-202 method 305) x7r: 25c, 1.00.2 vrms (open circuit voltage) at 1khz dissipation factor 25c x7r: 2.5% max @ 25c, 1.00.2 vrms (open circuit voltage) at 1khz insulation resistance 25c (mil-std-202 method 302) x7r: 100k m or 1000 m-f, whichever is less. insulation resistance 125c (mil-std-202 method 302) x7r: 10k m or 100 m-f, whichever is less. dielectric withstanding voltage 25c (flash test) x7r: 250% rated voltage for 5 seconds with 50 ma max charging current. life test (1000 hrs) x7r: 200% rated voltage at +125c moisture resistance (mil-std-202 method 106) x7r: ten cycles with no voltage applied. thermal shock (mil-std-202 method 107, condition a) immersion cycling (mil-std-202 method 104, condition b) resistance to solder heat (mil-std-202, method 210, condition b, for 20 seconds) electrical specifications tape & reel quantity part pieces SE01 2000 se03/se53 1000 se04/se54 1000 se05/se55 500 se06/se56 500 rohs part available SE01 yes se03/se53 yes se04/se54 yes se05/se55 yes se06/se56 yes how to order
54 smps capacitors (se style) product offering C x7r style l (max.) h (max.) t (max.) ls (nom.) ld (nom.) SE01 5.08 (0.200) 5.08 (0.200) 5.08 (0.200) 5.08 (0.200) 0.508 (0.020) se03/se53 7.62 (0.300) 7.62 (0.300) 5.08 (0.200) 5.08 (0.200) 0.508 (0.020) se04/se54 10.2 (0.400) 10.2 (0.400) 5.08 (0.200) 5.08 (0.200) 0.508 (0.020) se05/se55 12.7 (0.500) 12.7 (0.500) 5.08 (0.200) 10.2 (0.400) 0.635 (0.025) se06/se56 22.1 (0.870) 15.2 (0.600) 5.08 (0.200) 20.1 (0.790) 0.813 (0.032) l = length t = thickness ls = lead spacing nominal .787 (0.031) h = height m = meniscus 1.52 (0.060) max. ll = lead length 50.8 (2.000) max./25.4 (1.000 min.) ld = lead diameter nominal .050 (0.002) SE01 se03 C se06 se53 C se56 m ld ll ls h l m ld ll ls h l m ld ll ls h h + 3.683 (0.145) l t dimensions millimeters (inches) x7r capacitance range (f) style 25 50 100 wvdc wvdc wvdc min./max. min./max. min./max. SE01 0.47/1.5 0.39/1.0 0.33/0.68 se03/se53 2.7/6.8 2.2/4.7 1.8/3.3 se04/se54 5.6/12 3.9/10 3.3/6.8 se05/se55 8.2/18 6.8/12 4.7/10.0 se06/se56 18/39 12/27 6.8/15
|