dual-in-line sockets very low profile open frame www.mill-max.com 516-922-6000 15 series 115...001 10 0.5 0.2 0.3 41 115-xx-210-41-001 4 0.2 0.3 0.4 102 115-xx-304-41-001 6 0.3 0.3 0.4 67 115-xx-306-41-001 8 0.4 0.3 0.4 50 115-xx-308-41-001 10 0.5 0.3 0.4 40 115-xx-310-41-001 14 0.7 0.3 0.4 28 115-xx-314-41-001 16 0.8 0.3 0.4 25 115-xx-316-41-001 18 0.9 0.3 0.4 22 115-xx-318-41-001 20 1.0 0.3 0.4 20 115-xx-320-41-001 22 1.1 0.3 0.4 18 115-xx-322-41-001 24 1.2 0.3 0.4 16 115-xx-324-41-001 28 1.4 0.3 0.4 14 115-xx-328-41-001 20 1.0 0.4 0.5 20 115-xx-420-41-001 22 1.1 0.4 0.5 18 115-xx-422-41-001 24 1.2 0.4 0.5 16 115-xx-424-41-001 28 1.4 0.4 0.5 14 115-xx-428-41-001 32 1.6 0.4 0.5 12 115-xx-432-41-001 24 1.2 0.6 0.7 16 115-xx-624-41-001 28 1.4 0.6 0.7 14 115-xx-628-41-001 32 1.6 0.6 0.7 12 115-xx-632-41-001 36 1.8 0.6 0.7 11 115-xx-636-41-001 40 2.0 0.6 0.7 10 115-xx-640-41-001 42 2.1 0.6 0.7 9 115-xx-642-41-001 48 2.4 0.6 0.7 8 115-xx-648-41-001 50 2.5 0.6 0.7 8 115-xx-650-41-001 52 2.6 0.6 0.7 7 115-xx-652-41-001 50 2.5 0.9 1.0 8 115-xx-950-41-001 52 2.6 0.9 1.0 7 115-xx-952-41-001 64 3.2 0.9 1.0 6 115-xx-964-41-001 for high temperature insulators add ?100? to end of part numbers specify plating code xx= 13 93 sleeve (pin) contact (clip) 10 ? au 200 ? sn/pb 30 ? au 30 ?au a b c ? low profile socket, sits only .122? above pcb. ? hi-rel, 4-finger becu #30 clip rated at 3 amps. see page 208 for details. ? uses mill-max #0501 pin. see page 131 for details. ordering information xx= plating code see below total number of pins quantity per tube
plating options for headers, sockets and spring pins some platings not available for stamped dip sockets or plcc's headers pin rohs standard 10 10u" gold over 100-150u" nickel yes yes 40 200u" matte tin over 100-150u" nickel yes yes 90 200u" tin/lead over 100-150u" nickel no yes sockets shell clip 13 10u" gold over 100-150u" nickel 30u" gold over 50-100u" nickel yes yes 41 200u" matte tin over 100-150u" nickel 10u" gold over 50-100u" nickel yes no 43 200u" matte tin over 100-150u" nickel 30u" gold over 50-100u" nickel yes yes 44 200u" matte tin over 100-150u" nickel 150u" matte tin over 50-100u" nickel yes yes 91 200u" tin/lead over 100-150u" nickel 10u" gold over 50-100u" nickel no yes 93 200u" tin/lead over 100-150u" nickel 30u" gold over 50-100u" nickel no yes 99 200u" tin/lead over 100-150u" nickel 150u" tin/lead over 50-100u" nickel no yes military shell clip 33 30u" gold over 100-150u" nickel 30u" gold over 50-100u" nickel yes yes 83 100u" tin/lead over 100-150u" nickel 30u" gold over 50-100u" nickel no yes 88 100u" tin/lead over 100-150u" nickel 100u" tin/lead over 50-100u" nickel no yes note: gold platings are minimum thickness and tin/lead is 60/40 alloy spring header pin shell spring 22 20u" gold over 100-150u" nickel 10u" gold over 50-100u" nickel yes yes revision - date 02/16/2006
|